{"product_id":"biamp-920-01984-00001-voltera-d-1200-2m","title":"Biamp 920-01984-00001 Voltera D 1200.2M","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Biamp Voltera D 1200.2M is a two-channel networked amplified loudspeaker controller that combines 1200 W of Class D amplification with a fully programmable onboard DSP in a single rack unit. It is built for commercial AV integrators driving moderate power on a small number of loudspeaker zones. As a rack-mount DSP amplifier, the Voltera D 1200.2M drives low-impedance, 70V, or 100V loudspeakers and supports AVB, Dante, and AES67 for networked audio distribution. Onboard processing lets it replace an external DSP in many smaller commercial audio systems.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Voltera D 1200.2M delivers 1200 W across two channels, supplying 600 W per channel with both channels driven. Its onboard DSP offers headroom equivalent to a TesiraFORTÉ, so one chassis handles amplification and loudspeaker processing together, which is especially valuable in smaller venues where it can replace an external DSP. Each channel drives 2.7, 4, 8, or 16 ohm loads as well as 70V and 100V constant-voltage lines, applied from the loudspeaker profile chosen during commissioning. Power sharing allows up to 100% of total power through a single channel, reaching 1000 W at 100V, matching output to uneven loudspeaker loads. The amplifier is 100% software configurable through Biamp Tesira or VenueTune, and the ALAMOS profile library covers more than 200 Biamp models to speed setup. Distributed processing means system cost scales with power requirements. The unit can be sustained through PoE+ so the processor stays online without a reboot during a mains power loss, and it supports failover-to-analog operation. Integrators can compare the four-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/biamp-920-01982-00001-voltera-d-1200-4m\"\u003eVoltera D 1200.4M\u003c\/a\u003e and the higher-power \u003ca href=\"https:\/\/creationnetworks.net\/products\/biamp-920-01985-00001-voltera-d-2400-2m\"\u003eVoltera D 2400.2M\u003c\/a\u003e, or view the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/biamp\"\u003eBiamp collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1200 W Across Two Channels\u003c\/strong\u003e — The amplifier delivers 1200 W total with both channels driven, supplying 600 W per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard Programmable DSP\u003c\/strong\u003e — A fully programmable DSP with headroom equivalent to a TesiraFORTÉ handles loudspeaker processing without a separate processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetworked Audio Support\u003c\/strong\u003e — The unit supports AVB, Dante, and AES67 over two 1000Base-T ports in converged, split, or redundant network modes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Sharing\u003c\/strong\u003e — Power sharing delivers up to 100% of total power through a single channel, reaching 1000 W at 100V on one output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Output Drive\u003c\/strong\u003e — Each channel drives 2.7, 4, 8, and 16 ohm low-impedance loads as well as 70V and 100V constant-voltage lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE+ Processor Sustain\u003c\/strong\u003e — When port 1 is connected to a PoE+ switch on a UPS, the processor stays online through a mains power loss without rebooting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eALAMOS Profile Library\u003c\/strong\u003e — Nearly 700 loudspeaker profiles covering more than 200 Biamp models speed commissioning in Tesira or VenueTune.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Rack Unit\u003c\/strong\u003e — The 1 RU chassis provides high power density where rack space is limited.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:320px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ SKU\u003c\/td\u003e\n\u003ctd\u003eVoltera D 1200.2M \/ 920-01984-00001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier channels\u003c\/td\u003e\n\u003ctd\u003e2 (Class D)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal output, all channels driven\u003c\/td\u003e\n\u003ctd\u003e1200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower per channel, all channels driven\u003c\/td\u003e\n\u003ctd\u003e600 W (70\/100V, 16, 8, 4, 2.7 ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax power per channel (power sharing)\u003c\/td\u003e\n\u003ctd\u003e1000 W at 100V; 1000 W at 70V; 1000 W at 8 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum output voltage\u003c\/td\u003e\n\u003ctd\u003e145 Vpk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum output current\u003c\/td\u003e\n\u003ctd\u003e35 Apk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetworked media formats\u003c\/td\u003e\n\u003ctd\u003eDante, AES67, AVB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork ports\u003c\/td\u003e\n\u003ctd\u003e2 x 1000Base-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSample rates\u003c\/td\u003e\n\u003ctd\u003e48 and 96 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e+\/-0.5 dB (20 Hz - 20 kHz, 8 ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic range\u003c\/td\u003e\n\u003ctd\u003e117 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration software\u003c\/td\u003e\n\u003ctd\u003eBiamp Tesira, VenueTune\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e1.7 x 17.5 x 16.9 in (44 x 444 x 430 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e16.8 lbs (7.6 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e100-240 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5-year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"color:#888;font-size:0.9em;\"\u003eSpecifications sourced from the Biamp Voltera D M amplified loudspeaker controller data sheet (rev. 0925). Confirm detailed specifications against current Biamp documentation.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Voltera D 1200.2M require a separate DSP?\u003c\/strong\u003e\u003cbr\u003eNo. It includes a fully programmable onboard DSP with headroom equivalent to a TesiraFORTÉ, so in many designs it replaces an external processor for loudspeaker management.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose the two-channel model?\u003c\/strong\u003e\u003cbr\u003eThe 1200.2M concentrates power into 600 W per channel, which suits dedicated loudspeaker zones that need more power on fewer outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich loudspeakers can it drive?\u003c\/strong\u003e\u003cbr\u003eEach channel drives 2.7, 4, 8, and 16 ohm low-impedance loads as well as 70V and 100V constant-voltage lines, set through the loudspeaker profile chosen during configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat audio networks does it support?\u003c\/strong\u003e\u003cbr\u003eIt supports AVB, Dante, and AES67 over two 1000Base-T ports and can run in converged, split, or redundant network modes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stay online during a power outage?\u003c\/strong\u003e\u003cbr\u003eIf port 1 is connected to a PoE+ switch backed by a UPS, the processor is sustained through a mains power loss without rebooting, and the unit supports failover-to-analog operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space does it need?\u003c\/strong\u003e\u003cbr\u003eThe chassis occupies a single rack unit (1 RU) and ships with a rear support kit for 19-inch rack mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and compliance does it carry?\u003c\/strong\u003e\u003cbr\u003eThe Voltera D M series carries a 5-year warranty and is compliant with the US Trade Agreement Act (TAA).\u003c\/p\u003e","brand":"Biamp","offers":[{"title":"Default Title","offer_id":47945542697196,"sku":"920-01984-00001","price":3392.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/unnamed_3a9bce3e-e711-437f-85d0-f62c901f6a42.png?v=1784728941","url":"https:\/\/creationnetworks.net\/products\/biamp-920-01984-00001-voltera-d-1200-2m","provider":"Creation Networks","version":"1.0","type":"link"}