{"product_id":"avpro-edge-ac-mxnet-sw24xf-24-port-10g-fiber-avoip-switch","title":"AVPro Edge AC-MXNET-SW24XF - 24-Port 10G Fiber AVoIP Switch","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe AVPro Edge AC-MXNET-SW24XF is a 24-port 10G fiber AVoIP network switch built for MXnet 10G and SDVoE deployments that need enterprise-grade bandwidth without the port density of a full 48-port core. With 24 x SFP+ ports and 6 x QSFP28 stacking ports, it gives integrators a mid-size entry point into the MXnet 10G ecosystem, scaling from a single standalone switch to a multi-switch, uplinked topology without a network redesign. The switch ships preconfigured for SDVoE traffic, so VLAN, QoS, IGMP, and LAG settings are already set correctly before it leaves the box.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe AC-MXNET-SW24XF delivers 1.68 Tbps of total switching capacity and a 600 Mpps forwarding rate, giving it the headroom to carry full multicast load from an SDVoE or MXnet 10G video distribution system without dropped frames. Its 24 SFP+ ports run at 10 GbE by default with 1 GbE fallback, while the 6 QSFP28 ports default to 100 GbE and support breakout to 4 x 25 Gbps or 4 x 10 Gbps for flexible stacking and backbone uplinks. Dual-switch stacking is fully non-blocking using just 3 of the 6 QSFP28 ports for the inter-switch link, leaving the remaining 3 ports per switch free for additional endpoint expansion or a second uplink. A full Layer 3 switching architecture adds OSPF, BGP, MPLS, and VRF support, which matters on projects where the AV-over-IP fabric has to converge with the facility's broader IT network rather than running as an isolated island. AVPro Edge's Intelligent A\/V Processing re-engineers multicast handling specifically for AV traffic, keeping processor load predictable even when the switch is fully populated. Hot-swappable 1+1 redundant power supplies and 3+1 redundant hot-swappable fans with front-to-back airflow give it the serviceability profile expected on a mission-critical AV-over-IP core, and the 1RU chassis fits standard AV and IT equipment racks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 x SFP+ and 6 x QSFP28 Ports\u003c\/strong\u003e — Provides 24 10 GbE\/1 GbE SFP+ ports plus 6 QSFP28 ports for 100 GbE uplinks or 25\/10 Gbps breakout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.68 Tbps Switching Capacity\u003c\/strong\u003e — Delivers a 600 Mpps forwarding rate with full multicast load handling for dense SDVoE and MXnet 10G deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Blocking Dual-Switch Stacking\u003c\/strong\u003e — A 3 x 100G inter-switch link keeps dual-switch stacking fully non-blocking while leaving 3 QSFP28 ports per switch free for expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreconfigured for MXnet\u003c\/strong\u003e — VLAN, QoS, IGMP, and LAG settings are optimized out of the box for SDVoE deployments, cutting commissioning time on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Layer 3 Switching\u003c\/strong\u003e — OSPF, BGP, MPLS, and VRF support allow the AV-over-IP fabric to converge with the facility's broader IT network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedundant Power and Cooling\u003c\/strong\u003e — Hot-swappable 1+1 redundant power supplies and 3+1 redundant hot-swappable fans support continuous operation through a single-component failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1RU Rack-Mount Design\u003c\/strong\u003e — Low-profile front-to-back airflow chassis fits standard AV and IT equipment racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-to-Core Flexibility\u003c\/strong\u003e — Deploys as a standalone core, a distribution switch, or an edge switch beneath a larger MXnet 10G core switch, with no network redesign required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCorporate campus AV-over-IP backbone\u003c\/li\u003e\n\u003cli\u003eHigher education classroom and lecture hall distribution\u003c\/li\u003e\n\u003cli\u003eBroadcast and production facilities\u003c\/li\u003e\n\u003cli\u003eGovernment and public-sector command centers\u003c\/li\u003e\n\u003cli\u003eMid-size multi-room commercial deployments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003ePorts\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSFP+ Ports\u003c\/td\u003e\n\u003ctd\u003e24x SFP+: 10 GbE \/ 1 GbE, 10 GbE by default\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQSFP28 Ports\u003c\/td\u003e\n\u003ctd\u003e6x QSFP28: 40 Gbps \/ 100 GbE, 100 GbE by default; supports 4x25 Gbps SFP28 or 4x10 Gbps SFP+ breakout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManagement Port\u003c\/td\u003e\n\u003ctd\u003e1x 10\/100\/1000 BASE-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConsole Port\u003c\/td\u003e\n\u003ctd\u003e1x RJ45 (out-of-band)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e1x USB 2.0 Type-A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eSwitching\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching Capacity\u003c\/td\u003e\n\u003ctd\u003e1.68 Tbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForwarding Rate\u003c\/td\u003e\n\u003ctd\u003e600 Mpps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMAC Address Table\u003c\/td\u003e\n\u003ctd\u003e32K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eARP Table\u003c\/td\u003e\n\u003ctd\u003e8K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRouting Table\u003c\/td\u003e\n\u003ctd\u003e30K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJumbo Frame Support\u003c\/td\u003e\n\u003ctd\u003eUp to 10,000 bytes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVLAN Support\u003c\/td\u003e\n\u003ctd\u003eUp to 4,096 VLANs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eHardware\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch ASIC\u003c\/td\u003e\n\u003ctd\u003eMarvell Aldrin2 98DX8548\/24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch Chip Cache\u003c\/td\u003e\n\u003ctd\u003e6 MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPU\u003c\/td\u003e\n\u003ctd\u003eExternal ARMv8 Cortex-A72 2.2GHz Quad-core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMemory\u003c\/td\u003e\n\u003ctd\u003eDDR4 4 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eSPI Flash 32 MB + MMC 8 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003ePower\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Input\u003c\/td\u003e\n\u003ctd\u003e100-240 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e1+1 modular redundant hot-swappable AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Power Consumption\u003c\/td\u003e\n\u003ctd\u003e350W per PSU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch Power Consumption\u003c\/td\u003e\n\u003ctd\u003e200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eEnvironmental\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 to 45°C (32 to 113°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40 to 70°C (-40 to 158°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Humidity\u003c\/td\u003e\n\u003ctd\u003e5-95% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003e3+1 redundant hot-swappable fans, front-to-back airflow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003ePhysical\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack Space\u003c\/td\u003e\n\u003ctd\u003e1 RU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e17.75 x 17.44 x 1.75 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (Unit)\u003c\/td\u003e\n\u003ctd\u003e14.61 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eWarranty\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Warranty\u003c\/td\u003e\n\u003ctd\u003e10 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the AC-MXNET-SW24XF compatible with existing MXnet 10G encoders and decoders?\u003c\/strong\u003e Yes, it is preconfigured for MXnet 10G (SDVoE) traffic out of the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the switch require manual VLAN or QoS configuration for AV traffic?\u003c\/strong\u003e No, VLAN, QoS, IGMP, and LAG settings are optimized out of the box for SDVoE deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow many switches can be stacked together?\u003c\/strong\u003e The switch supports a maximum of 3 switch hops, with non-blocking dual-switch stacking using 3 of the 6 QSFP28 ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat happens if a power supply or fan fails?\u003c\/strong\u003e The switch has 1+1 redundant hot-swappable power supplies and 3+1 redundant hot-swappable fans, allowing continued operation during a single-component failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the QSFP28 ports be used for lower-speed connections?\u003c\/strong\u003e Yes, each QSFP28 port supports breakout to 4x25 Gbps or 4x10 Gbps for flexible expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does this compare to the 48-port SW48XF?\u003c\/strong\u003e The SW24XF covers the same MXnet 10G ecosystem at half the port density, for projects that don't need a full 48-port core.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the warranty on this product?\u003c\/strong\u003e AVPro Edge covers the AC-MXNET-SW24XF with a 10-year manufacturer warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"AVPro Edge","offers":[{"title":"Default Title","offer_id":67661595738348,"sku":"AC-MXNET-SW24XF","price":9999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/AC-MXNET-SW24XF_FrontAngle_ShadowSquared.png?v=1791303212","url":"https:\/\/creationnetworks.net\/products\/avpro-edge-ac-mxnet-sw24xf-24-port-10g-fiber-avoip-switch","provider":"Creation Networks","version":"1.0","type":"link"}