{"product_id":"ac-mxnet-1g-dex-uv2-avpro-edge","title":"AVPro Edge AC-MXNET-1G-DEX-UV2 - USB 2.0 over IP Extender","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe AVPro Edge AC-MXNET-1G-DEX-UV2 is a USB 2.0 over IP extender designed to receive USB data and dynamic signaling transmitted by a matching AC-MXNET-1G-HEX-UV2 host unit across an MXnet 1G V2 network. Built for USB extension over network infrastructure in commercial AV deployments, this device-end endpoint lets integrators route keyboards, mice, touchscreens, and other USB 2.0 peripherals to any point on a PoE-powered Ethernet backbone. It replaces point-to-point USB extension cabling with a scalable AVoIP USB extender architecture that can grow with the system. Typical deployments pair one or more DEX units with HEX-UV2 host extenders inside boardrooms, control rooms, and multi-room AV installations.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe AC-MXNET-1G-DEX-UV2 is the device-side half of AVPro Edge's Evolution II USB over IP extension pair, engineered specifically to work with the AC-MXNET-1G-HEX-UV2 host extender. Unlike traditional HDBaseT or USB fiber extenders that only support fixed point-to-point connections, this MXnet USB extension device operates over a standard PoE network switch, allowing any DEX unit to be dynamically routed to any HEX unit through MXnet Mentor software running on the 1G V2 CBOX. This dynamic routing capability makes the unit well suited for command-and-control rooms, medical reading rooms, and shared conference spaces where USB peripherals need to move between multiple host computers. The unit provides dual USB-A and dual USB-C device ports plus a dedicated USB-C service port for firmware and diagnostics. A built-in SFP slot supports fiber transceivers for distance extension up to 10 km, well beyond the 100-meter limit of copper Ethernet. Power over Ethernet eliminates the need for a local power supply at the endpoint, simplifying rack and wall-plate installations. An integrated OLED display shows IP and MAC address information along with a custom device name, which speeds up troubleshooting during commissioning. Because the DEX pairs with any AC-MXNET-1G V2 encoder or decoder in mixed deployments, integrators can add USB-only extension to an existing MXnet 1G V2 video-over-IP system without replacing existing hardware.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB 2.0 Over IP Extension\u003c\/strong\u003e — Extends full-spectrum USB 2.0 data and dynamic signals over a standard PoE Ethernet network instead of a dedicated point-to-point cable run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual USB-A and USB-C Device Ports\u003c\/strong\u003e — Provides two USB-A and two USB-C device ports plus a USB-C service port for connecting multiple peripherals at a single endpoint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Routing via MXnet Mentor\u003c\/strong\u003e — Integrates with MXnet Mentor on the 1G V2 CBOX so any DEX unit can be re-routed to any HEX unit in real time without re-cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed MXnet V2 Deployment\u003c\/strong\u003e — Pairs with any MXnet 1G V2 encoder or decoder, letting integrators combine USB-only endpoints with AV-over-IP video devices on the same network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber-Ready SFP Slot\u003c\/strong\u003e — Supports an SFP fiber transceiver for distance extension up to 10 km beyond the 100-meter copper Ethernet limit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower over Ethernet\u003c\/strong\u003e — PoE (IEEE 802.3af) eliminates the need for a local power supply, simplifying rack, wall-plate, and above-ceiling installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated OLED Display\u003c\/strong\u003e — Shows IP and MAC address with custom device naming for fast identification and troubleshooting during commissioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFanless Operation\u003c\/strong\u003e — Convection cooling delivers silent, energy-efficient operation suitable for conference rooms and boardrooms.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eHuddle room\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eUSB Data Rates\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Write Speed\u003c\/td\u003e\n\u003ctd\u003e228.7 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Read Speed\u003c\/td\u003e\n\u003ctd\u003e158.8 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvg Write Speed\u003c\/td\u003e\n\u003ctd\u003e226 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvg Read Speed\u003c\/td\u003e\n\u003ctd\u003e154.4 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003ePorts\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e1x female RJ45, PoE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSFP\u003c\/td\u003e\n\u003ctd\u003e1x SFP slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e2x USB-A device ports, 2x USB-C device ports, 1x USB-C service port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eDistance\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e100 meters \/ 330 feet over CAT5e and above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSFP and Fiber\u003c\/td\u003e\n\u003ctd\u003e1000BASE-SX (MMF, 850nm, 550m, LC) or 1000BASE-LX\/LH (1310nm, 10km)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eEnvironmental\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e23 to 125°F (-5 to 51°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFanless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003ePower\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Power Consumption\u003c\/td\u003e\n\u003ctd\u003e6.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3af (15.4W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eDimensions\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e6.31 x 3.97 x 0.81 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (Unit)\u003c\/td\u003e\n\u003ctd\u003e0.93 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eRegulatory\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE\/FCC\/UL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Warranty\u003c\/td\u003e\n\u003ctd\u003e10 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat device does the AC-MXNET-1G-DEX-UV2 pair with?\u003c\/strong\u003e It is designed to work with the AVPro Edge \u003ca href=\"https:\/\/creationnetworks.net\/products\/ac-mxnet-1g-hex-uv2-avpro-edge\"\u003eAC-MXNET-1G-HEX-UV2\u003c\/a\u003e host extender; together they form a complete USB 2.0 over IP extension set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan it be mixed with MXnet 1G V2 video encoders and decoders?\u003c\/strong\u003e Yes, the DEX pairs with any MXnet 1G V2 encoder on the same network, allowing USB extension to be added alongside existing AVoIP video infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow far can the unit be installed from the network switch?\u003c\/strong\u003e Up to 100 meters over CAT5e or better copper Ethernet, or up to 10 km using a compatible SFP fiber transceiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes it require a separate power supply?\u003c\/strong\u003e No, it is powered via PoE (IEEE 802.3af) from a compliant network switch, though a power supply is also available separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is the device configured on the network?\u003c\/strong\u003e Routing between DEX and HEX units is managed through MXnet Mentor on the 1G V2 CBOX, which allows administrators to reassign connections without physical re-cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the warranty on this product?\u003c\/strong\u003e AVPro Edge covers the AC-MXNET-1G-DEX-UV2 with a 10-year manufacturer warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat support resources are available for integrators?\u003c\/strong\u003e AVPro Edge provides data sheets, manuals, firmware updates, and third-party control drivers through its support portal for system programmers and installers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AVPro Edge","offers":[{"title":"Default Title","offer_id":47904609599724,"sku":"AC-MXNET-1G-DEX-UV2","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/AC-MXNET-1G-DEX-UV2_FrontAngle2_Square.png?v=1783551505","url":"https:\/\/creationnetworks.net\/products\/ac-mxnet-1g-dex-uv2-avpro-edge","provider":"Creation Networks","version":"1.0","type":"link"}