{"title":"Williams AV Hearing Loop Systems","description":"\u003cp\u003eWilliams AV induction hearing loop systems, loop drivers, counter loops and preformed loop coil for ADA-compliant assistive listening. A hearing loop transmits directly to a telecoil-equipped hearing aid or cochlear implant, so the user needs no receiver and no visible equipment — which is why loops are increasingly specified over FM in public-facing spaces.\u003c\/p\u003e\u003cp\u003eLoop design is governed by IEC 60118-4: the field strength has to be uniform across the listening area and spill into adjacent rooms has to be controlled. That makes loop layout an engineering exercise rather than a product choice, particularly in rooms with steel structure or underfloor heating. Counter loops serve single service positions — ticket windows, reception desks, pharmacy counters. Creation Networks designs, installs and field-verifies loop systems to the standard.\u003c\/p\u003e","products":[{"product_id":"williams-sound-dl207-sys-d-induction-loop-system-with-network-control-and-dante-input","title":"Williams AV DL207 SYS D – Hearing Loop System with Dante and Network Control","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Williams AV DL207 SYS D is a complete induction hearing loop system for medium to large venues, built around the dual-output DL207 NET loop amplifier with Dante network audio input and PC-based network control. It delivers assistive listening audio directly to T-coil hearing aids and cochlear implants — no receiver handout required — covering up to 30,000 sq ft with perimeter loops or supporting dual-amp and phased-array hearing loop installations. The system ships with loop wire, body-pack receivers, a charger kit, warning tape, and ADA signage for a full commercial deployment.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL207 NET amplifier at the heart of this system provides two independent 9.5 A loop outputs, making it the right platform for dual-amp designs and phased-array layouts that maintain even field strength in steel-structure buildings and adjacent-room installations. Onboard DSP includes parametric equalization, compression, metal loss compensation, AGC, high\/low-pass filters, and adjustable audio delay, while built-in calibration tools — a test tone generator with pink noise and loop current matching — streamline commissioning to the IEC 60118-4 field strength standard.\u003c\/p\u003e\n\u003cp\u003eThis \"D\" model adds a dedicated Dante input (44.1\/48 kHz, 24-bit) alongside balanced mic\/line, line-level, and 25\/70\/100 V speaker-level inputs, so the amplifier accepts audio from networked AV systems, mixing consoles, or distributed paging systems without converters. Configuration and calibration are handled locally from the front-panel LCD or over the network with the DigiLoop PC app via Ethernet, and a loop fault relay provides supervision for integration with monitoring systems. The 1 RU rack-mount chassis drops into standard equipment racks.\u003c\/p\u003e\n\u003cp\u003eThe system includes 500 ft of flat copper loop wire, warning tape, two PLR BP1 body-pack loop receivers with earbuds and a drop-in charger kit for guests without T-coil hearing aids, and a T-coil ADA wall plaque. For venues considering Bluetooth LE Audio instead of a physical loop, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/williams-av-infinium-system-2-receivers\"\u003eInfinium Auracast assistive listening system\u003c\/a\u003e, or browse the complete \u003ca href=\"https:\/\/creationnetworks.net\/collections\/williams-av\"\u003eWilliams AV collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"Calibrating Field Strength in a Phase Array Induction Loop system\" src=\"https:\/\/www.youtube.com\/embed\/R8eguE6H-j8\" height=\"348\" width=\"451\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 9.5 A Loop Outputs\u003c\/strong\u003e — Two independent outputs drive dual-amp or phased-array induction loop installations, covering up to 30,000 sq ft with perimeter loops at a 3:1 aspect ratio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante Network Audio Input\u003c\/strong\u003e — A dedicated Dante port (44.1\/48 kHz, 24-bit, 2 ms minimum latency) takes program audio directly from networked AV systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive DSP Processing\u003c\/strong\u003e — Parametric EQ, compression, metal loss compensation, AGC, high\/low-pass filters, and 0–165 ms audio delay tailor loop audio to the room and structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Calibration Tools\u003c\/strong\u003e — An internal test tone generator with pink noise and loop current adjustment\/matching simplify commissioning to the IEC 60118-4 standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Control via DigiLoop PC App\u003c\/strong\u003e — Function control and calibration run over Ethernet from a Windows PC, supporting remote management of installed systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Input Complement\u003c\/strong\u003e — Balanced XLR mic\/line with 24 V phantom power, line-level terminal block, and 25\/70\/100 V speaker-level input connect to virtually any source, including paging systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop Fault Supervision\u003c\/strong\u003e — A loop fault relay with NC\/NO contacts plus open\/short and thermal protection support monitored, mission-critical installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete System Package\u003c\/strong\u003e — Includes 500 ft of flat loop wire, warning tape, two body-pack loop receivers with earbuds, a dual drop-in charger kit, and a T-coil ADA wall plaque.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ch3\u003eDL207 NET Amplifier\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e1 RU rack mount; 19\" W x 1.75\" H x 10\" D (chassis 17\" W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e9.2 lbs (4.2 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eInternal, universal 100-240 VAC, 50\/60 Hz, 200 W; IEC 320-C14 inlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eVariable speed, temperature-controlled fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage Area\u003c\/td\u003e\n\u003ctd\u003e30,000 sq ft (2,786 sq m) perimeter loops, 3:1 aspect ratio, both outputs driven; 18,000 sq ft (1,672 sq m) at 1:1 aspect ratio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDante Input\u003c\/td\u003e\n\u003ctd\u003e(1x) RJ-45, 100 Mbps; 2 ms minimum latency; 44.1\/48 kHz sample rates; 24-bit resolution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine Input\u003c\/td\u003e\n\u003ctd\u003e(1x) 3-position terminal block, 10 kΩ; accepts -10 dBV, -4 dBu, +4 dBu, +8 dBu, balanced or unbalanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMic\/Line Input\u003c\/td\u003e\n\u003ctd\u003e(1x) XLR 3-pin; 1.5 kΩ mic \/ 10 kΩ line; 24 V phantom power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70-100 V Input\u003c\/td\u003e\n\u003ctd\u003e(1x) 2-position terminal block; accepts 25 V, 70 V, or 100 V speaker-level from distributed audio\/paging systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine Outputs\u003c\/td\u003e\n\u003ctd\u003e(1x) 3-position terminal block; +4 dBu balanced or unbalanced, mirroring loop output audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoop Outputs\u003c\/td\u003e\n\u003ctd\u003e(1x) 2-position terminal block per output; 16.1 Vrms (22.8 Vpk) continuous drive voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Loop Output Current\u003c\/td\u003e\n\u003ctd\u003e9.5 Arms (13.4 Apk) per output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoop Resistance Range\u003c\/td\u003e\n\u003ctd\u003e0.5 Ω to 3.0 Ω (DC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e45 Hz to 9.0 kHz ± 2 dB (1 kHz reference)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Loop THD\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 1% at rated output current (1 kHz sine)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Output Delay\u003c\/td\u003e\n\u003ctd\u003eAdjustable 0 to 165 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone Output\u003c\/td\u003e\n\u003ctd\u003e(1x) 1\/4\" stereo jack on front panel; menu-selectable input or output monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoop Fault Relay\u003c\/td\u003e\n\u003ctd\u003e(1x) 3-position terminal block with NC, NO, and Common; 2.0 A @ 30 VDC contact rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Control\u003c\/td\u003e\n\u003ctd\u003eDigiLoop PC app via Ethernet (RJ-45); firmware updates via USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet \/ USB\u003c\/td\u003e\n\u003ctd\u003e(1x) RJ-45, 10-100 Mbps; (1x) USB standard-B (USB 1.1\/2.0\/3.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards Compliance\u003c\/td\u003e\n\u003ctd\u003eDesigned to meet IEC 60118-4 when correctly designed, installed, and commissioned; tested to IEC 62489-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eCE, UL, ULC, FCC, Industry Canada, RoHS, WEEE, CB Scheme, RCM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-year against component failure and manufacturing defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePLR BP1 Loop Receiver (each)\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e4.1\" H x 2.85\" W x 1.38\" D (104 x 72 x 35 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery\u003c\/td\u003e\n\u003ctd\u003e(2) AA Alkaline or NiMH rechargeable; up to 200 hours on Alkaline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone Jack\u003c\/td\u003e\n\u003ctd\u003e3.5 mm stereo TRS; works with mono or stereo headphones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output\u003c\/td\u003e\n\u003ctd\u003e35 mW max into 33 Ω mono\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e300 Hz to 10 kHz, -6 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePLW F500 Loop Wire\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e500 ft (152.4 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eFlat copper, 1.9 mm² cross-sectional area, Mylar (polyester) encapsulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth \/ Thickness\u003c\/td\u003e\n\u003ctd\u003e22 mm OD (19 mm bare copper); 0.17 mm OD (0.1 mm bare copper)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSystem Includes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier\u003c\/td\u003e\n\u003ctd\u003e(1) DL207 NET induction loop amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceivers\u003c\/td\u003e\n\u003ctd\u003e(2) PLR BP1 body-pack receivers with batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarphones\u003c\/td\u003e\n\u003ctd\u003e(2) EAR 013 single mini earbuds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger Kit\u003c\/td\u003e\n\u003ctd\u003e(1) BAT KT6 dual drop-in charger kit (CHG 3502 charger and (2) BAT 026-2 AA NiMH batteries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoop Wire\u003c\/td\u003e\n\u003ctd\u003e(1) PLW F500 500 ft roll of flat power loop wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarning Tape\u003c\/td\u003e\n\u003ctd\u003e(3) FWT 001 rolls of flat wire warning tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignage\u003c\/td\u003e\n\u003ctd\u003e(1) IDP 009 ADA wall plaque (T-coil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eOrder with -01 suffix for Euro line cord, -02 for UK line cord, or -04 for Australia line cord.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow large an area can the DL207 SYS D cover?\u003c\/h3\u003e\n\u003cp\u003eWith both outputs driven, the DL207 covers up to 30,000 sq ft using perimeter loops at a 3:1 aspect ratio, or 18,000 sq ft at 1:1. Phased-array designs reduce overspill and improve uniformity in challenging spaces; final coverage depends on loop design and building construction.\u003c\/p\u003e\n\u003ch3\u003eWhat makes the \"D\" model different?\u003c\/h3\u003e\n\u003cp\u003eThe SYS D variant adds a dedicated Dante network audio input (44.1\/48 kHz, 24-bit) to the DL207 NET amplifier, allowing direct connection to Dante-enabled DSPs, consoles, and networked AV systems alongside the analog and speaker-level inputs.\u003c\/p\u003e\n\u003ch3\u003eDo listeners need receivers?\u003c\/h3\u003e\n\u003cp\u003eGuests with T-coil-equipped hearing aids or cochlear implants receive loop audio directly with no receiver. The system includes two PLR BP1 body-pack loop receivers with earbuds for guests without T-coils, helping satisfy ADA receiver requirements.\u003c\/p\u003e\n\u003ch3\u003eHow is the system calibrated and managed?\u003c\/h3\u003e\n\u003cp\u003eThe amplifier includes a test tone generator with pink noise and loop current matching for commissioning to IEC 60118-4. Ongoing control and calibration are available from the front-panel LCD or over the network using the DigiLoop PC app (Windows 7 or higher) via Ethernet.\u003c\/p\u003e\n\u003ch3\u003eCan the loop amplifier connect to a paging system?\u003c\/h3\u003e\n\u003cp\u003eYes. In addition to mic\/line and line-level inputs, a dedicated 25\/70\/100 V speaker-level input accepts audio directly from distributed audio and paging systems, with priority input selection and adjustable threshold.\u003c\/p\u003e\n\u003ch3\u003eDoes a hearing loop installation require special planning?\u003c\/h3\u003e\n\u003cp\u003eYes. Loop wire layout, building steel, and adjacent spaces all affect performance, which is why this system supports dual-amp and phased-array designs and includes metal loss compensation. Williams AV TechBlue design services are available through Creation Networks for system design support.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty applies?\u003c\/h3\u003e\n\u003cp\u003eThe DL207 NET amplifier carries a 2-year warranty against component failure and manufacturing defects.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":43733431812332,"sku":"DL207 SYS D","price":6130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/williams-sound-dl207-sys-d-induction-loop-system-with-network-control-and-dante-input-creation-networks-67492.png?v=1757912050"},{"product_id":"williams-av-dl102-counter-loop-2-amp","title":"Williams AV DL102 – 2-Amp Counter Induction Loop Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL102\u003c\/strong\u003e is a 2-amp counter induction loop amplifier that delivers assistive-listening audio to telecoil-equipped hearing aids at a single service point. It gives banks, pharmacies, ticket windows, and reception desks a compact hearing loop driver designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL102 is a small-area counter loop amplifier for point-of-service locations where a customer and a staff member speak across a counter. Driving a counter loop pad or coil, it transmits speech directly to the telecoil (T-setting) of a patron's hearing aid, cutting out background noise and glass-barrier muffling. It is intended for single-position counters rather than room-wide coverage, and it is a common choice for meeting ADA and Equality Act service-point requirements. Pair it with a counter loop coil such as the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=ACLC12\"\u003eACLC12\u003c\/a\u003e and a suitable microphone.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounter coverage\u003c\/strong\u003e — Drives a single service-point loop for one-to-one conversations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelecoil delivery\u003c\/strong\u003e — Sends speech straight to hearing-aid T-settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4 hearing-loop performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact install\u003c\/strong\u003e — Fits under or behind a counter with a loop pad or coil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBank, pharmacy, and retail service counters\u003c\/li\u003e\n\u003cli\u003eTicket windows and box offices\u003c\/li\u003e\n\u003cli\u003eReception and information desks\u003c\/li\u003e\n\u003cli\u003eGovernment service points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eCounter (small-area) induction loop amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eClass\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e2-amp counter loop driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat area does the DL102 cover?\u003c\/strong\u003e\u003cbr\u003eIt is a counter amplifier for a single service point, not for room-wide loop coverage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need special receivers?\u003c\/strong\u003e\u003cbr\u003eNo. Anyone with a telecoil-equipped hearing aid set to T can receive the loop; a loop receiver is available for others.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat loop does it drive?\u003c\/strong\u003e\u003cbr\u003eA counter loop pad or preformed coil such as the ACLC12.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it help with compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and support ADA service-point access.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a microphone included?\u003c\/strong\u003e\u003cbr\u003eThe amplifier requires a microphone appropriate to the counter; systems bundle one.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512291052,"sku":"DL102","price":445.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL102-with-Mic_web_2024.png?v=1784686458"},{"product_id":"williams-av-dl102-sy1-counter-loop-system-2-amp","title":"Williams AV DL102 SY1 – 2-Amp Counter Loop System","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL102 SY1\u003c\/strong\u003e is a complete 2-amp counter induction loop system that bundles the DL102 amplifier with the loop and microphone needed to serve a single service point. It gives a reception or ticket counter a ready-to-install hearing loop designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL102 SY1 packages the DL102 counter loop amplifier with a counter loop and microphone so a business can deploy assistive listening at one service position without sourcing parts separately. Speech is delivered directly to the telecoil of a patron's hearing aid, cutting background noise and barrier muffling across a counter. It suits banks, pharmacies, box offices, and reception desks that need a straightforward, standards-minded solution. Related: the standalone \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL102\"\u003eDL102 amplifier\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete kit\u003c\/strong\u003e — Amplifier, loop, and microphone in one system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounter coverage\u003c\/strong\u003e — Serves a single one-to-one service point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelecoil delivery\u003c\/strong\u003e — Speech goes straight to hearing-aid T-settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBank, pharmacy, and retail service counters\u003c\/li\u003e\n\u003cli\u003eTicket windows and box offices\u003c\/li\u003e\n\u003cli\u003eReception and information desks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eCounter loop system (amplifier + loop + mic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDL102 2-amp counter driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe DL102 amplifier plus a counter loop and microphone for one service point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is SY1 different from SY2 or SY3?\u003c\/strong\u003e\u003cbr\u003eThe system variants bundle different loop and mic configurations for the counter; SY1 is the base configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, if their hearing aid has a telecoil set to T; loop receivers are available for others.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is it used?\u003c\/strong\u003e\u003cbr\u003eSingle-position counters in banks, pharmacies, box offices, and reception areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA service-point access.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512323820,"sku":"DL102 SY1","price":635.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL102_SY1_web_2024.png?v=1784686427"},{"product_id":"williams-av-dl102-sy2-counter-loop-system-2-amp","title":"Williams AV DL102 SY2 – 2-Amp Counter Loop System","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL102 SY2\u003c\/strong\u003e is a 2-amp counter induction loop system built around the DL102 amplifier, bundled with the loop and microphone for a single service point. It provides a complete, standards-minded hearing loop for counters and reception desks.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL102 SY2 pairs the DL102 counter loop amplifier with a counter loop and microphone configuration for one-to-one service positions. Speech is delivered directly to a patron's telecoil-equipped hearing aid, overcoming background noise and glass-barrier muffling. Choose SY2 when its loop and microphone package best fits the counter layout; the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL102%20SY1\"\u003eSY1\u003c\/a\u003e and SY3 offer alternate configurations. It suits banks, pharmacies, box offices, and reception desks needing IEC 60118-4-minded assistive listening.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete kit\u003c\/strong\u003e — DL102 amplifier with loop and microphone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounter coverage\u003c\/strong\u003e — Serves a single one-to-one service point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelecoil delivery\u003c\/strong\u003e — Speech goes straight to hearing-aid T-settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBank, pharmacy, and retail service counters\u003c\/li\u003e\n\u003cli\u003eTicket windows and box offices\u003c\/li\u003e\n\u003cli\u003eReception and information desks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eCounter loop system (amplifier + loop + mic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDL102 2-amp counter driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe DL102 amplifier with a counter loop and microphone for one service point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does SY2 differ from SY1 and SY3?\u003c\/strong\u003e\u003cbr\u003eEach system variant bundles a different loop and microphone configuration to suit the counter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T; loop receivers are available for others.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is it used?\u003c\/strong\u003e\u003cbr\u003eSingle-position counters in banks, pharmacies, box offices, and reception areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA service-point access.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512356588,"sku":"DL102 SY2","price":860.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL-102-SY2-Digi-Loop-System_web_2024.png?v=1784686452"},{"product_id":"williams-av-dl102-sy3-counter-loop-system-2-amp","title":"Williams AV DL102 SY3 – 2-Amp Counter Loop System","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL102 SY3\u003c\/strong\u003e is a 2-amp counter induction loop system based on the DL102 amplifier, supplied with the loop and microphone for a single service point. It delivers a complete, standards-minded hearing loop for counters and reception desks.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL102 SY3 combines the DL102 counter loop amplifier with a counter loop and microphone configuration for one-to-one service positions. It transmits speech directly to the telecoil of a patron's hearing aid, overcoming background noise and barrier muffling at the counter. Choose SY3 when its bundled loop and microphone best match the installation; the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL102%20SY1\"\u003eSY1\u003c\/a\u003e and SY2 offer alternate configurations. It suits banks, pharmacies, box offices, and reception desks requiring IEC 60118-4-minded assistive listening.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete kit\u003c\/strong\u003e — DL102 amplifier with loop and microphone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounter coverage\u003c\/strong\u003e — Serves a single one-to-one service point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelecoil delivery\u003c\/strong\u003e — Speech goes straight to hearing-aid T-settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBank, pharmacy, and retail service counters\u003c\/li\u003e\n\u003cli\u003eTicket windows and box offices\u003c\/li\u003e\n\u003cli\u003eReception and information desks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eCounter loop system (amplifier + loop + mic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDL102 2-amp counter driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe DL102 amplifier with a counter loop and microphone for one service point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does SY3 differ from SY1 and SY2?\u003c\/strong\u003e\u003cbr\u003eEach system variant bundles a different loop and microphone configuration to suit the counter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T; loop receivers are available for others.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is it used?\u003c\/strong\u003e\u003cbr\u003eSingle-position counters in banks, pharmacies, box offices, and reception areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA service-point access.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512389356,"sku":"DL102 SY3","price":605.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL102_SY3_web_2024.png?v=1784686456"},{"product_id":"williams-av-pla-90-portable-induction-loop-system","title":"Williams AV PLA 90 – Portable Induction Loop System","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV PLA 90\u003c\/strong\u003e is a portable induction loop system that brings hearing-loop access to counters and small spaces without a permanent install. It gives mobile service points and pop-up desks a self-contained loop designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe PLA 90 packages a counter loop amplifier and integrated loop in a portable form factor, so staff can set it on a desk or counter and deliver speech directly to telecoil-equipped hearing aids. It is well suited to venues that move service points, run temporary counters, or need a loop that travels between locations. Because it works with any telecoil hearing aid set to T, no patron device is required. Related: the fixed \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL102\"\u003eDL102 counter amplifier\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortable\u003c\/strong\u003e — Self-contained loop for desks and pop-up counters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelecoil delivery\u003c\/strong\u003e — Speech goes straight to hearing-aid T-settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo patron device\u003c\/strong\u003e — Works with any telecoil hearing aid on T.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTemporary and mobile service counters\u003c\/li\u003e\n\u003cli\u003ePop-up registration and information desks\u003c\/li\u003e\n\u003cli\u003eSmall meeting and interview rooms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003ePortable counter induction loop system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs any installation required?\u003c\/strong\u003e\u003cbr\u003eNo. The PLA 90 is portable and sits on a desk or counter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is it best used?\u003c\/strong\u003e\u003cbr\u003eTemporary, mobile, or pop-up service points and small rooms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA service-point access.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it move between locations?\u003c\/strong\u003e\u003cbr\u003eYes; portability is its main advantage over a fixed counter loop.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512422124,"sku":"PLA 90","price":384.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/PLA_90_web.png?v=1784686662"},{"product_id":"williams-av-aclc12-counter-loop-coil-12-turn-preformed-loop-345mmx305mm","title":"Williams AV ACLC12 – 12-Turn Preformed Counter Loop Coil","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV ACLC12\u003c\/strong\u003e is a 12-turn preformed counter loop coil, sized roughly 345 x 305 mm, that pairs with a counter loop amplifier to create a single-point hearing loop. It gives installers a ready-made coil for service-counter assistive listening.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe ACLC12 is a factory-wound 12-turn loop coil designed to sit under or behind a service counter and radiate the magnetic field a telecoil hearing aid picks up. Being preformed, it removes the guesswork of hand-winding a counter loop and helps achieve consistent field strength. Use it with a counter amplifier such as the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL102\"\u003eDL102\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreformed coil\u003c\/strong\u003e — Factory-wound 12-turn loop for consistent results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounter-sized\u003c\/strong\u003e — Approximately 345 x 305 mm for service points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy install\u003c\/strong\u003e — Mounts under or behind a counter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier match\u003c\/strong\u003e — Works with counter loop drivers like the DL102.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003ePreformed counter loop coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eTurns\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eApprox. size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e345 x 305 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eUse with\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eCounter loop amplifiers (e.g. DL102)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512454892,"sku":"ACLC12","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/prefrormed_loop.png?v=1784686393"},{"product_id":"williams-av-dl-104-00-induction-loop-amplifier","title":"Williams AV DL 104-00 – Medium-Area Induction Loop Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL 104-00\u003c\/strong\u003e is a medium-area induction loop amplifier that broadcasts assistive-listening audio across a room to telecoil-equipped hearing aids. It gives meeting rooms, chapels, courtrooms, and classrooms a room-wide hearing loop designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL 104-00 drives a perimeter loop that fills a medium-sized room with a magnetic signal, so anyone with a telecoil hearing aid set to T hears clear speech without a separate receiver. It steps up from a single-counter loop to cover an audience area, making it a common choice for spaces that seat groups rather than serve one person at a time. Pair it with appropriate \u003ca href=\"https:\/\/creationnetworks.net\/search?q=PLW%20power%20loop%20wire\"\u003eloop wire\u003c\/a\u003e and, for rack or wall installation, the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=RPK%20010\"\u003eRPK 010 mount kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoom-wide coverage\u003c\/strong\u003e — Drives a perimeter loop across a medium area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelecoil delivery\u003c\/strong\u003e — Reaches hearing aids on T with no patron device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible mounting\u003c\/strong\u003e — Rack or wall install with the RPK 010 kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMeeting rooms and boardrooms\u003c\/li\u003e\n\u003cli\u003eChapels and small worship spaces\u003c\/li\u003e\n\u003cli\u003eCourtrooms and hearing rooms\u003c\/li\u003e\n\u003cli\u003eClassrooms and training rooms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eMedium-area induction loop amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eRack or wall (RPK 010 kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow large an area does it cover?\u003c\/strong\u003e\u003cbr\u003eIt is sized for medium rooms; loop area depends on layout and installation per IEC 60118-4 design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat loop wire is needed?\u003c\/strong\u003e\u003cbr\u003ePerimeter loop wire matched to the room; PLW series wire is available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be rack-mounted?\u003c\/strong\u003e\u003cbr\u003eYes, using the RPK 010 rack and wall mount kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512487660,"sku":"DL 104-00","price":990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL-104_front_Loop-Okay_shadow.png?v=1784686425"},{"product_id":"williams-av-dl107-net-induction-loop-amplifier-with-network-control","title":"Williams AV DL107 NET – Networked Induction Loop Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL107 NET\u003c\/strong\u003e is a professional induction loop amplifier with network control, built for large rooms and venues that manage assistive listening over a network. It broadcasts speech to telecoil hearing aids across an audience area and is designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL107 NET drives a perimeter loop for large rooms while giving integrators remote monitoring and configuration through network control, which suits multi-space facilities and managed AV environments. It delivers clear speech directly to any telecoil hearing aid set to T, without requiring patrons to collect a receiver. For audio distributed over Dante, choose the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL107%20NET%20D\"\u003eDL107 NET D\u003c\/a\u003e; for a bundled install, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL107%20SYS\"\u003eDL107 SYS\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge-area coverage\u003c\/strong\u003e — Drives a perimeter loop across a sizable room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork control\u003c\/strong\u003e — Remote monitoring and configuration for managed venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelecoil delivery\u003c\/strong\u003e — Reaches hearing aids on T with no patron device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouses of worship and auditoriums\u003c\/li\u003e\n\u003cli\u003eCourtrooms and council chambers\u003c\/li\u003e\n\u003cli\u003eLecture halls and conference centers\u003c\/li\u003e\n\u003cli\u003eManaged multi-room facilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLarge-area induction loop amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eNetwork control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does network control add?\u003c\/strong\u003e\u003cbr\u003eRemote monitoring and configuration, useful across managed multi-room venues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support Dante?\u003c\/strong\u003e\u003cbr\u003eThe DL107 NET D adds Dante audio inputs; this model is the network-control version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs loop wire included?\u003c\/strong\u003e\u003cbr\u003eThe amplifier is sold on its own; the DL107 SYS bundles wire and tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512520428,"sku":"DL107 NET","price":2070.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL107-Hearing-Loop-Transmitter-Front_web_6b1fd5cf-7ceb-4873-9aa0-4e301719a1d9.png?v=1784686465"},{"product_id":"williams-av-dl107-net-d-induction-loop-amplifier-with-dante-inputs","title":"Williams AV DL107 NET D – Networked Loop Amplifier with Dante","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL107 NET D\u003c\/strong\u003e is a large-area induction loop amplifier with network control and Dante audio inputs, built for networked-audio venues. It broadcasts speech to telecoil hearing aids across a room and is designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL107 NET D adds Dante audio inputs to the networked DL107 platform, letting the loop amplifier take audio directly from a Dante network alongside remote monitoring and configuration. This suits large facilities standardized on networked audio, where routing the program feed over Dante simplifies cabling. It delivers clear speech to any telecoil hearing aid set to T with no patron receiver. For a non-Dante version, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL107%20NET\"\u003eDL107 NET\u003c\/a\u003e; for a bundled install, the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL107%20SYS%20D\"\u003eDL107 SYS D\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante inputs\u003c\/strong\u003e — Takes program audio directly from a Dante network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork control\u003c\/strong\u003e — Remote monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge-area coverage\u003c\/strong\u003e — Drives a perimeter loop across a sizable room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNetworked-audio auditoriums and houses of worship\u003c\/li\u003e\n\u003cli\u003eCourtrooms and council chambers\u003c\/li\u003e\n\u003cli\u003eConference centers and lecture halls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLarge-area induction loop amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eNetwork control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eAudio input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the D add?\u003c\/strong\u003e\u003cbr\u003eDante audio inputs, so the amplifier takes program audio over the network.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it also have network control?\u003c\/strong\u003e\u003cbr\u003eYes, for remote monitoring and configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs loop wire included?\u003c\/strong\u003e\u003cbr\u003eSold on its own; the DL107 SYS D bundles wire and tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512553196,"sku":"DL107 NET D","price":2530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL107-Hearing-Loop-Transmitter-Front_web.png?v=1784686463"},{"product_id":"williams-av-dl107-sys-induction-loop-system-with-network-control","title":"Williams AV DL107 SYS – Networked Induction Loop System","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL107 SYS\u003c\/strong\u003e is a complete networked induction loop system that bundles the DL107 NET amplifier with loop wire and installation tape. It gives large rooms a ready-to-install hearing loop with network control, designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL107 SYS packages the network-controlled DL107 loop amplifier together with the perimeter loop wire and floor tape an installer needs to build a room-wide loop, reducing the parts to source separately. It delivers clear speech to any telecoil hearing aid set to T, without patrons needing a receiver, and its network control suits managed venues. For Dante audio, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL107%20SYS%20D\"\u003eDL107 SYS D\u003c\/a\u003e; for the amplifier alone, the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL107%20NET\"\u003eDL107 NET\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete system\u003c\/strong\u003e — Amplifier, loop wire, and tape together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork control\u003c\/strong\u003e — Remote monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge-area coverage\u003c\/strong\u003e — Room-wide perimeter loop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouses of worship and auditoriums\u003c\/li\u003e\n\u003cli\u003eCourtrooms and council chambers\u003c\/li\u003e\n\u003cli\u003eLecture halls and conference centers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLarge-area induction loop system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDL107 NET (network control)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLoop wire and installation tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe DL107 NET amplifier plus loop wire and installation tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support Dante?\u003c\/strong\u003e\u003cbr\u003eThe DL107 SYS D adds Dante audio inputs; this system uses network control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size room does it suit?\u003c\/strong\u003e\u003cbr\u003eLarge rooms; final loop design follows IEC 60118-4 for the space.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512585964,"sku":"DL107 SYS","price":3255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL107_SYS_2024.png?v=1784686475"},{"product_id":"williams-av-dl107-sys-d-induction-loop-system-with-dante-inputs","title":"Williams AV DL107 SYS D – Networked Loop System with Dante","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL107 SYS D\u003c\/strong\u003e is a complete networked induction loop system with Dante audio inputs, bundling the DL107 NET D amplifier with loop wire and installation tape. It gives networked-audio venues a ready-to-install room loop designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL107 SYS D packages the Dante-equipped, network-controlled DL107 loop amplifier with the perimeter loop wire and floor tape needed for a room-wide install. Taking program audio over Dante simplifies cabling in facilities standardized on networked audio, while network control adds remote monitoring. It delivers clear speech to any telecoil hearing aid set to T with no patron receiver. For a non-Dante version, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL107%20SYS\"\u003eDL107 SYS\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete system\u003c\/strong\u003e — Amplifier, loop wire, and tape together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante inputs\u003c\/strong\u003e — Program audio over the network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork control\u003c\/strong\u003e — Remote monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNetworked-audio auditoriums and houses of worship\u003c\/li\u003e\n\u003cli\u003eCourtrooms and council chambers\u003c\/li\u003e\n\u003cli\u003eConference centers and lecture halls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLarge-area induction loop system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDL107 NET D (network + Dante)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLoop wire and installation tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe DL107 NET D amplifier plus loop wire and installation tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the D add?\u003c\/strong\u003e\u003cbr\u003eDante audio inputs, in addition to network control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size room does it suit?\u003c\/strong\u003e\u003cbr\u003eLarge rooms; loop design follows IEC 60118-4 for the space.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512618732,"sku":"DL107 SYS D","price":3710.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL107_SYS_2025.png?v=1784686470"},{"product_id":"williams-av-dl207-net-induction-loop-amplifier-with-network-control","title":"Williams AV DL207 NET – Low-Spill Networked Loop Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL207 NET\u003c\/strong\u003e is a dual-loop, low-spill induction loop amplifier with network control, built for sites where magnetic overspill between rooms or floors must be controlled. It delivers assistive-listening audio to telecoil hearing aids while limiting spill, and is designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL207 NET drives a phased (dual) loop array that confines the magnetic field to the intended room, reducing overspill into adjacent spaces or floors where confidentiality or interference is a concern. Network control gives integrators remote monitoring and configuration for managed facilities. It reaches any telecoil hearing aid set to T with no patron receiver. For Dante audio, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL207%20NET%20D\"\u003eDL207 NET D\u003c\/a\u003e; for a bundled install, the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL207%20SYS\"\u003eDL207 SYS\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-spill design\u003c\/strong\u003e — Phased dual-loop array confines the field to the room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork control\u003c\/strong\u003e — Remote monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelecoil delivery\u003c\/strong\u003e — Reaches hearing aids on T with no patron device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-story and stacked-room buildings\u003c\/li\u003e\n\u003cli\u003eCourtrooms and boardrooms needing confidentiality\u003c\/li\u003e\n\u003cli\u003eAdjacent meeting rooms and lecture halls\u003c\/li\u003e\n\u003cli\u003eManaged multi-space facilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDual-loop (low-spill) induction loop amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eNetwork control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is low-spill for?\u003c\/strong\u003e\u003cbr\u003eIt confines the loop field to the room, important for confidentiality and stacked or adjacent spaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support Dante?\u003c\/strong\u003e\u003cbr\u003eThe DL207 NET D adds Dante inputs; this model is the network-control version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs loop wire included?\u003c\/strong\u003e\u003cbr\u003eSold on its own; the DL207 SYS bundles wire and tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512651500,"sku":"DL207 NET","price":4050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL107-Hearing-Loop-Transmitter-Front_web_d1cc0287-c4fd-4646-b287-9ba0d0796909.png?v=1784686481"},{"product_id":"williams-av-dl207-net-d-induction-loop-amplifier-with-network-control-and-dante-inputs","title":"Williams AV DL207 NET D – Low-Spill Loop Amplifier with Dante","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL207 NET D\u003c\/strong\u003e is a dual-loop, low-spill induction loop amplifier with network control and Dante audio inputs. It controls magnetic overspill between rooms or floors while taking program audio over a Dante network, and is designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL207 NET D adds Dante audio inputs to the low-spill DL207 platform, so networked-audio facilities can route the program feed directly to the loop amplifier while its phased dual-loop array confines the field to the intended space. Network control provides remote monitoring and configuration. It reaches any telecoil hearing aid set to T with no patron receiver. For a non-Dante version, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL207%20NET\"\u003eDL207 NET\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-spill design\u003c\/strong\u003e — Phased dual-loop array confines the field to the room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante inputs\u003c\/strong\u003e — Program audio over the network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork control\u003c\/strong\u003e — Remote monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNetworked-audio multi-story buildings\u003c\/li\u003e\n\u003cli\u003eCourtrooms and boardrooms needing confidentiality\u003c\/li\u003e\n\u003cli\u003eAdjacent meeting rooms and lecture halls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDual-loop (low-spill) induction loop amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eNetwork control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eAudio input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the D add?\u003c\/strong\u003e\u003cbr\u003eDante audio inputs, in addition to network control and low-spill design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose low-spill?\u003c\/strong\u003e\u003cbr\u003eTo confine the loop field where confidentiality or stacked\/adjacent rooms matter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs loop wire included?\u003c\/strong\u003e\u003cbr\u003eSold on its own; system bundles add wire and tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512815340,"sku":"DL207 NET D","price":4540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL107-Hearing-Loop-Transmitter-Front_web_c9db6056-4895-4cff-b94f-a2caf53dc701.png?v=1784686479"},{"product_id":"williams-av-dl207-sys-induction-loop-system-with-network-control","title":"Williams AV DL207 SYS – Low-Spill Networked Loop System","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL207 SYS\u003c\/strong\u003e is a complete low-spill induction loop system that bundles the DL207 NET dual-loop amplifier with loop wire and installation tape. It gives sites needing overspill control a ready-to-install hearing loop with network control, designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL207 SYS packages the network-controlled, low-spill DL207 amplifier with the perimeter loop wire and floor tape an installer needs to build a phased dual-loop that confines the magnetic field to the intended room. It suits multi-story buildings, courtrooms, and adjacent rooms where overspill must be limited. It reaches any telecoil hearing aid set to T with no patron receiver. For the amplifier alone, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL207%20NET\"\u003eDL207 NET\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete system\u003c\/strong\u003e — Amplifier, loop wire, and tape together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-spill design\u003c\/strong\u003e — Phased dual-loop confines the field to the room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork control\u003c\/strong\u003e — Remote monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-story and stacked-room buildings\u003c\/li\u003e\n\u003cli\u003eCourtrooms and boardrooms needing confidentiality\u003c\/li\u003e\n\u003cli\u003eAdjacent meeting rooms and lecture halls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDual-loop (low-spill) induction loop system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDL207 NET (network control)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLoop wire and installation tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe DL207 NET low-spill amplifier plus loop wire and installation tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose low-spill?\u003c\/strong\u003e\u003cbr\u003eTo confine the loop field in stacked, adjacent, or confidential spaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size room does it suit?\u003c\/strong\u003e\u003cbr\u003eLarge rooms; loop design follows IEC 60118-4 for the space.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512880876,"sku":"DL207 SYS","price":5635.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL207_SYS_2025.png?v=1784686504"},{"product_id":"williams-av-dl210-net-2-0-large-area-48-volt-induction-loop-amplifier","title":"Williams AV DL210 NET 2.0 – Large-Area 48V Loop Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL210 NET 2.0\u003c\/strong\u003e is a large-area, 48-volt induction loop amplifier with network control, built to cover big rooms and high-current loops. It delivers assistive-listening audio to telecoil hearing aids across large venues and is designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL210 NET 2.0 is a high-output 48-volt loop driver for large loops that demand more current than a standard room amplifier can supply, such as full-size auditoriums and arenas. Network control adds remote monitoring and configuration for managed installations. It reaches any telecoil hearing aid set to T with no patron receiver. For Dante audio, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL210%20NET%20D\"\u003eDL210 NET D 2.0\u003c\/a\u003e; for bundled installs, the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL210%20SYS\"\u003eDL210 SYS\u003c\/a\u003e systems.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-output 48V\u003c\/strong\u003e — Drives large, high-current loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge-area coverage\u003c\/strong\u003e — Suits auditoriums and arenas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork control\u003c\/strong\u003e — Remote monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAuditoriums and performing-arts venues\u003c\/li\u003e\n\u003cli\u003eArenas and large houses of worship\u003c\/li\u003e\n\u003cli\u003eTransit terminals and large public spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLarge-area induction loop amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e48-volt high-current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eNetwork control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhy 48 volts?\u003c\/strong\u003e\u003cbr\u003eThe higher voltage drives large, high-current loops beyond a standard room amplifier's reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support Dante?\u003c\/strong\u003e\u003cbr\u003eThe DL210 NET D 2.0 adds Dante inputs; this model is the network-control version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs loop wire included?\u003c\/strong\u003e\u003cbr\u003eSold on its own; the DL210 SYS systems bundle wire and tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512913644,"sku":"DL210 NET 2.0","price":5045.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL210_Digi-Loop-transmitter_front_web1.png?v=1784686506"},{"product_id":"williams-av-dl210-net-d-2-0-large-area-48-volt-induction-loop-amplifier-with-dante-inputs","title":"Williams AV DL210 NET D 2.0 – Large-Area 48V Loop Amplifier with Dante","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL210 NET D 2.0\u003c\/strong\u003e is a large-area, 48-volt induction loop amplifier with network control and Dante audio inputs. It drives high-current loops in big venues while taking program audio over a Dante network, and is designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL210 NET D 2.0 adds Dante inputs to the high-output 48-volt DL210 platform, letting large networked-audio venues route the program feed straight to the loop amplifier. Its high current suits auditoriums, arenas, and other large loops, and network control adds remote monitoring and configuration. It reaches any telecoil hearing aid set to T with no patron receiver. For a non-Dante version, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL210%20NET%202.0\"\u003eDL210 NET 2.0\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-output 48V\u003c\/strong\u003e — Drives large, high-current loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante inputs\u003c\/strong\u003e — Program audio over the network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork control\u003c\/strong\u003e — Remote monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNetworked-audio auditoriums and arenas\u003c\/li\u003e\n\u003cli\u003eLarge houses of worship\u003c\/li\u003e\n\u003cli\u003eTransit terminals and large public spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLarge-area induction loop amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e48-volt high-current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eNetwork control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eAudio input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the D add?\u003c\/strong\u003e\u003cbr\u003eDante audio inputs, in addition to 48-volt output and network control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy 48 volts?\u003c\/strong\u003e\u003cbr\u003eIt drives large, high-current loops beyond a standard room amplifier's reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs loop wire included?\u003c\/strong\u003e\u003cbr\u003eSold on its own; the DL210 SYS systems bundle wire and tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512946412,"sku":"DL210 NET D 2.0","price":5520.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL210_Digi-Loop-transmitter_front_web1_df889d43-4236-4f3d-827a-8a8770a6374b.png?v=1784686510"},{"product_id":"williams-av-dl210-sys-1-2-0-large-area-dsp-48-volt-induction-loop-system","title":"Williams AV DL210 SYS 1 2.0 – Large-Area DSP 48V Loop System","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL210 SYS 1 2.0\u003c\/strong\u003e is a large-area induction loop system built around the DSP-equipped 48-volt DL210 amplifier. It covers big venues with a high-current hearing loop and onboard signal processing, designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL210 SYS 1 2.0 combines the high-output 48-volt DL210 amplifier with DSP for tuning the loop to the room, giving large auditoriums and arenas a system-level solution with network control. It reaches any telecoil hearing aid set to T with no patron receiver. This base system configuration provides the amplifier and processing; for a version supplied with loop wire and tape, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL210%20SYS%202%202.0\"\u003eDL210 SYS 2 2.0\u003c\/a\u003e. A Dante variant is also available.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP tuning\u003c\/strong\u003e — Onboard processing to match the loop to the room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-output 48V\u003c\/strong\u003e — Drives large, high-current loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork control\u003c\/strong\u003e — Remote monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAuditoriums and performing-arts venues\u003c\/li\u003e\n\u003cli\u003eArenas and large houses of worship\u003c\/li\u003e\n\u003cli\u003eTransit terminals and large public spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLarge-area DSP induction loop system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e48-volt high-current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eOnboard DSP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eNetwork control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the DSP do?\u003c\/strong\u003e\u003cbr\u003eIt tunes the loop signal to the room for consistent field strength per IEC 60118-4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does SYS 1 differ from SYS 2?\u003c\/strong\u003e\u003cbr\u003eSYS 1 is the base system; SYS 2 is supplied with loop wire and tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a Dante option?\u003c\/strong\u003e\u003cbr\u003eYes, the DL210 SYS 1 2.0 D adds Dante audio inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976512979180,"sku":"DL210 SYS 1 2.0","price":5590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL210-SYS-1-2.0_2024_8e837231-1c1f-421d-9034-2723f3637ebe.png?v=1784686520"},{"product_id":"williams-av-dl210-sys-1-2-0-d-large-area-dsp-48-volt-induction-loop-system-with-dante-input","title":"Williams AV DL210 SYS 1 2.0 D – Large-Area DSP 48V Loop System with Dante","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL210 SYS 1 2.0 D\u003c\/strong\u003e is a large-area DSP induction loop system with a 48-volt amplifier and Dante audio input. It covers big venues with a high-current hearing loop, onboard processing, and networked audio, designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL210 SYS 1 2.0 D adds a Dante audio input to the DSP-equipped 48-volt DL210 system, so large networked-audio venues can route the program feed directly to the loop while DSP tunes the signal to the room. Network control adds remote monitoring and configuration. It reaches any telecoil hearing aid set to T with no patron receiver. For the non-Dante version, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL210%20SYS%201%202.0\"\u003eDL210 SYS 1 2.0\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante input\u003c\/strong\u003e — Program audio over the network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP tuning\u003c\/strong\u003e — Onboard processing to match the loop to the room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-output 48V\u003c\/strong\u003e — Drives large, high-current loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNetworked-audio auditoriums and arenas\u003c\/li\u003e\n\u003cli\u003eLarge houses of worship\u003c\/li\u003e\n\u003cli\u003eTransit terminals and large public spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLarge-area DSP induction loop system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e48-volt high-current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eOnboard DSP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eAudio input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the D add?\u003c\/strong\u003e\u003cbr\u003eA Dante audio input, so program audio arrives over the network.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the DSP do?\u003c\/strong\u003e\u003cbr\u003eIt tunes the loop signal to the room for consistent field strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs loop wire included?\u003c\/strong\u003e\u003cbr\u003eThis is the base system; the SYS 2 configuration adds wire and tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513011948,"sku":"DL210 SYS 1 2.0 D","price":6010.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL210-SYS-1-2.0_2024.png?v=1784686515"},{"product_id":"williams-av-dl210-sys-2-2-0-large-area-dsp-48-volt-induction-loop-system-with-wire-and-tape","title":"Williams AV DL210 SYS 2 2.0 – Large-Area DSP 48V Loop System with Wire \u0026 Tape","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL210 SYS 2 2.0\u003c\/strong\u003e is a complete large-area DSP induction loop system supplied with loop wire and installation tape. Built around the 48-volt DL210 amplifier, it gives big venues a ready-to-install high-current hearing loop designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL210 SYS 2 2.0 packages the DSP-equipped, high-output 48-volt DL210 amplifier together with the perimeter loop wire and floor tape needed to build a large-area loop, reducing the parts an installer sources separately. DSP tunes the signal to the room and network control adds remote monitoring. It reaches any telecoil hearing aid set to T with no patron receiver. For the amplifier-and-DSP base system without wire, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL210%20SYS%201%202.0\"\u003eDL210 SYS 1 2.0\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete system\u003c\/strong\u003e — Amplifier, DSP, loop wire, and tape together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-output 48V\u003c\/strong\u003e — Drives large, high-current loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP tuning\u003c\/strong\u003e — Onboard processing to match the loop to the room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAuditoriums and performing-arts venues\u003c\/li\u003e\n\u003cli\u003eArenas and large houses of worship\u003c\/li\u003e\n\u003cli\u003eTransit terminals and large public spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLarge-area DSP induction loop system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e48-volt high-current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eOnboard DSP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLoop wire and installation tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe DSP 48-volt DL210 amplifier plus loop wire and installation tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does SYS 2 differ from SYS 1?\u003c\/strong\u003e\u003cbr\u003eSYS 2 adds the loop wire and tape; SYS 1 is the base amplifier-and-DSP system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a Dante option?\u003c\/strong\u003e\u003cbr\u003eYes, the DL210 SYS 2 2.0 D adds a Dante audio input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513044716,"sku":"DL210 SYS 2 2.0","price":7680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL210-SYS-2-2.0_2024-1_c3753cfd-1949-4a9c-b9a5-5df2e9095364.png?v=1784686532"},{"product_id":"williams-av-dl210-sys-2-2-0-d-large-area-dsp-48-volt-induction-loop-system-with-dante-wire-and-tape","title":"Williams AV DL210 SYS 2 2.0 D – Large-Area DSP 48V Loop System with Dante, Wire \u0026 Tape","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV DL210 SYS 2 2.0 D\u003c\/strong\u003e is a complete large-area DSP induction loop system with a 48-volt amplifier, Dante audio input, loop wire, and installation tape. It gives big networked-audio venues a ready-to-install high-current hearing loop designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DL210 SYS 2 2.0 D is the fully loaded DL210 system: the DSP-equipped 48-volt amplifier with a Dante audio input, bundled with perimeter loop wire and floor tape. Large networked-audio venues can route the program feed over Dante while DSP tunes the loop to the room and network control adds remote monitoring, all with the install materials included. It reaches any telecoil hearing aid set to T with no patron receiver. For the non-Dante version, see the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL210%20SYS%202%202.0\"\u003eDL210 SYS 2 2.0\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete system\u003c\/strong\u003e — Amplifier, DSP, loop wire, and tape together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante input\u003c\/strong\u003e — Program audio over the network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-output 48V with DSP\u003c\/strong\u003e — Drives and tunes large, high-current loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards-minded\u003c\/strong\u003e — Designed to help meet IEC 60118-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNetworked-audio auditoriums and arenas\u003c\/li\u003e\n\u003cli\u003eLarge houses of worship\u003c\/li\u003e\n\u003cli\u003eTransit terminals and large public spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLarge-area DSP induction loop system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e48-volt high-current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eOnboard DSP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eAudio input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLoop wire and installation tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eTelecoil (hearing-aid T-setting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDesigned to help meet IEC 60118-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe DSP 48-volt amplifier with Dante input, plus loop wire and installation tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the D add?\u003c\/strong\u003e\u003cbr\u003eA Dante audio input over the non-Dante SYS 2 version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo patrons need a receiver?\u003c\/strong\u003e\u003cbr\u003eNo, with a telecoil hearing aid set to T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat venues is it for?\u003c\/strong\u003e\u003cbr\u003eLarge networked-audio spaces; loop design follows IEC 60118-4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support compliance?\u003c\/strong\u003e\u003cbr\u003eIt is designed to help meet IEC 60118-4 and ADA assistive-listening requirements.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513077484,"sku":"DL210 SYS 2 2.0 D","price":8155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DL210-SYS-2-2.0_2024-1.png?v=1784686526"},{"product_id":"williams-av-plw-014-power-loop-wire","title":"Williams AV PLW 014 – Induction Loop Feeder Wire","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV PLW 014\u003c\/strong\u003e is induction loop wire for building the perimeter loop of a hearing-loop system. It gives installers the conductor that radiates the magnetic field a telecoil hearing aid receives, and is intended for use with Williams AV loop amplifiers designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe PLW 014 is loop wire run around the perimeter of a room (or as a phased array) and driven by a hearing-loop amplifier to create the magnetic field patrons' hearing aids pick up on the T-setting. Correct wire selection is part of achieving compliant, even field strength, so this conductor is matched to Williams AV loop drivers. Pair it with an amplifier such as the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL107%20NET\"\u003eDL107\u003c\/a\u003e or \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL210%20NET%202.0\"\u003eDL210\u003c\/a\u003e and protective \u003ca href=\"https:\/\/creationnetworks.net\/search?q=FWT%20001\"\u003eloop tape\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerimeter loop conductor\u003c\/strong\u003e — Radiates the field for telecoil pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier-matched\u003c\/strong\u003e — Made for Williams AV loop drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance role\u003c\/strong\u003e — Supports even field strength per IEC 60118-4 design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRoom-perimeter hearing loops in worship, court, and meeting spaces\u003c\/li\u003e\n\u003cli\u003ePhased-array low-spill loop installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eInduction loop feeder wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eUse with\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV hearing-loop amplifiers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eSupports IEC 60118-4 loop design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is loop wire for?\u003c\/strong\u003e\u003cbr\u003eIt forms the loop the amplifier drives to create the magnetic field hearing aids receive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich amplifier does it pair with?\u003c\/strong\u003e\u003cbr\u003eWilliams AV hearing-loop drivers such as the DL107 and DL210 families.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much wire is needed?\u003c\/strong\u003e\u003cbr\u003eIt depends on room size and loop design; a site plan determines the run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes wire choice affect compliance?\u003c\/strong\u003e\u003cbr\u003eYes; correct wire helps achieve even field strength under IEC 60118-4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs protective tape needed?\u003c\/strong\u003e\u003cbr\u003eFor floor runs, loop warning tape such as the FWT 001 protects the wire.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513110252,"sku":"PLW 014","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/plw_014_nb.png?v=1784686685"},{"product_id":"williams-av-plw-037-spool-wire-for-dl102-counter-loop-amplifier","title":"Williams AV PLW 037 – Spool Wire for DL102 Counter Loop","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV PLW 037\u003c\/strong\u003e is spool wire for the DL102 counter loop amplifier, giving installers the conductor to form a service-counter hearing loop that reaches telecoil hearing aids.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe PLW 037 is loop wire supplied on a spool and sized for counter-loop use with the DL102 amplifier. It lets an installer lay a compact loop under or around a service counter so speech reaches a patron's telecoil hearing aid on the T-setting. Use it with the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL102\"\u003eDL102 counter loop amplifier\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounter-loop conductor\u003c\/strong\u003e — Forms the loop at a single service point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDL102 matched\u003c\/strong\u003e — Sized for the DL102 counter amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpooled\u003c\/strong\u003e — Convenient length for counter installs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eCounter loop spool wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eUse with\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDL102 counter loop amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513143020,"sku":"PLW 037","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/plw_037_nb_81d7624c-e0ed-425d-80cb-c3c0f2ec1a59.png?v=1784686688"},{"product_id":"williams-av-plw-050-power-loop-wire","title":"Williams AV PLW 050 – Induction Loop Feeder Wire","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV PLW 050\u003c\/strong\u003e is induction loop wire for building the perimeter loop of a hearing-loop system. It carries the amplifier signal that creates the magnetic field a telecoil hearing aid receives, and is matched to Williams AV loop amplifiers designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe PLW 050 is a loop conductor run around a room's perimeter or as part of a phased array and driven by a hearing-loop amplifier. Selecting the right wire is part of achieving compliant, even field strength across the coverage area, so this wire is intended for use with Williams AV loop drivers. Pair it with an amplifier such as the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL107%20NET\"\u003eDL107\u003c\/a\u003e or \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL210%20NET%202.0\"\u003eDL210\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerimeter loop conductor\u003c\/strong\u003e — Radiates the field for telecoil pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier-matched\u003c\/strong\u003e — Made for Williams AV loop drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance role\u003c\/strong\u003e — Supports even field strength per IEC 60118-4 design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRoom-perimeter hearing loops in worship, court, and meeting spaces\u003c\/li\u003e\n\u003cli\u003ePhased-array low-spill loop installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eInduction loop feeder wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eUse with\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV hearing-loop amplifiers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eSupports IEC 60118-4 loop design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is loop wire for?\u003c\/strong\u003e\u003cbr\u003eIt forms the loop the amplifier drives to create the magnetic field hearing aids receive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich amplifier does it pair with?\u003c\/strong\u003e\u003cbr\u003eWilliams AV hearing-loop drivers such as the DL107 and DL210 families.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much wire is needed?\u003c\/strong\u003e\u003cbr\u003eIt depends on room size and loop design; a site plan determines the run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes wire choice affect compliance?\u003c\/strong\u003e\u003cbr\u003eYes; correct wire helps achieve even field strength under IEC 60118-4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it differ from other PLW wires?\u003c\/strong\u003e\u003cbr\u003eThe PLW range offers conductors suited to different loop sizes and installs.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513175788,"sku":"PLW 050","price":570.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/burial_calble_2mm_2.png?v=1784687170"},{"product_id":"williams-av-plw-051-power-loop-wire","title":"Williams AV PLW 051 – Induction Loop Feeder Wire","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV PLW 051\u003c\/strong\u003e is induction loop wire for building the perimeter loop of a larger hearing-loop system. It carries the amplifier signal that creates the magnetic field a telecoil hearing aid receives, and is matched to Williams AV loop amplifiers designed to help meet IEC 60118-4.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe PLW 051 is a loop conductor for perimeter or phased-array loops driven by a hearing-loop amplifier, suited to larger installations where more wire is required. Correct wire selection supports compliant, even field strength across the coverage area, so this wire is intended for use with Williams AV loop drivers. Pair it with an amplifier such as the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL207%20NET\"\u003eDL207\u003c\/a\u003e or \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL210%20NET%202.0\"\u003eDL210\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerimeter loop conductor\u003c\/strong\u003e — Radiates the field for telecoil pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger installs\u003c\/strong\u003e — Suited to bigger loop layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance role\u003c\/strong\u003e — Supports even field strength per IEC 60118-4 design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge room-perimeter hearing loops\u003c\/li\u003e\n\u003cli\u003ePhased-array low-spill loop installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eInduction loop feeder wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eUse with\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV hearing-loop amplifiers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eSupports IEC 60118-4 loop design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is loop wire for?\u003c\/strong\u003e\u003cbr\u003eIt forms the loop the amplifier drives to create the magnetic field hearing aids receive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich amplifier does it pair with?\u003c\/strong\u003e\u003cbr\u003eWilliams AV hearing-loop drivers such as the DL207 and DL210 families.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much wire is needed?\u003c\/strong\u003e\u003cbr\u003eIt depends on room size and loop design; a site plan determines the run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes wire choice affect compliance?\u003c\/strong\u003e\u003cbr\u003eYes; correct wire helps achieve even field strength under IEC 60118-4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it differ from other PLW wires?\u003c\/strong\u003e\u003cbr\u003eThe PLW range offers conductors suited to different loop sizes and installs.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513208556,"sku":"PLW 051","price":1030.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/burial_calble_2mm_2_769d6394-7b12-4747-88f9-eb4fad622517.png?v=1784687171"},{"product_id":"williams-av-plw-f300-power-loop-wire","title":"Williams AV PLW F300 – Flat Induction Loop Wire","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV PLW F300\u003c\/strong\u003e is flat induction loop wire for hearing-loop installations that need a low-profile conductor over a larger area, such as under carpet or flooring. It forms part of the perimeter loop that reaches telecoil hearing aids.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe PLW F300 is a flat loop conductor supplied for larger under-floor runs than the F100, lying low beneath floor coverings to avoid trip hazards and visible cable. Driven by a hearing-loop amplifier, it helps form the loop that radiates the magnetic field a patron's telecoil hearing aid receives. Use it with Williams AV loop amplifiers and protective \u003ca href=\"https:\/\/creationnetworks.net\/search?q=FWT%20001\"\u003eloop tape\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat profile\u003c\/strong\u003e — Low-profile conductor for under-floor runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger area\u003c\/strong\u003e — For bigger loop layouts than the F100.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier-matched\u003c\/strong\u003e — For Williams AV loop drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUnder-floor hearing loops in worship, court, and meeting spaces\u003c\/li\u003e\n\u003cli\u003eInstallations where round cable is unsuitable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eFlat induction loop wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eUse with\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV hearing-loop amplifiers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eSupports IEC 60118-4 loop design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhy flat wire?\u003c\/strong\u003e\u003cbr\u003eIts low profile suits under-carpet and under-floor runs without a trip hazard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does F300 differ from F100?\u003c\/strong\u003e\u003cbr\u003eF300 is intended for larger loop areas than the F100.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich amplifier does it pair with?\u003c\/strong\u003e\u003cbr\u003eWilliams AV hearing-loop drivers such as the DL107 and DL210 families.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes wire choice affect compliance?\u003c\/strong\u003e\u003cbr\u003eYes; correct wire helps achieve even field strength under IEC 60118-4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs protective tape needed?\u003c\/strong\u003e\u003cbr\u003eFor floor runs, loop warning tape such as the FWT 001 protects the wire.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513274092,"sku":"PLW F300","price":380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/plw_f300_nb.png?v=1784686690"},{"product_id":"williams-av-plw-f500-power-loop-wire","title":"Williams AV PLW F500 – Flat Induction Loop Wire","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV PLW F500\u003c\/strong\u003e is flat induction loop wire for large hearing-loop installations needing a low-profile conductor under carpet or flooring. It forms part of the perimeter loop that reaches telecoil hearing aids.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe PLW F500 is a flat loop conductor for the largest under-floor runs in the flat-wire range, lying low beneath floor coverings to avoid trip hazards and visible cable across big rooms. Driven by a hearing-loop amplifier, it helps form the loop that radiates the magnetic field a patron's telecoil hearing aid receives. Use it with Williams AV loop amplifiers and protective \u003ca href=\"https:\/\/creationnetworks.net\/search?q=FWT%20001\"\u003eloop tape\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat profile\u003c\/strong\u003e — Low-profile conductor for under-floor runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLargest area\u003c\/strong\u003e — For big loop layouts in the flat-wire range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier-matched\u003c\/strong\u003e — For Williams AV loop drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge under-floor hearing loops in auditoriums and worship spaces\u003c\/li\u003e\n\u003cli\u003eInstallations where round cable is unsuitable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eFlat induction loop wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eUse with\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV hearing-loop amplifiers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eSupports IEC 60118-4 loop design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhy flat wire?\u003c\/strong\u003e\u003cbr\u003eIts low profile suits under-carpet and under-floor runs without a trip hazard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does F500 differ from F100 and F300?\u003c\/strong\u003e\u003cbr\u003eF500 is intended for the largest loop areas in the flat-wire range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich amplifier does it pair with?\u003c\/strong\u003e\u003cbr\u003eWilliams AV hearing-loop drivers such as the DL107 and DL210 families.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes wire choice affect compliance?\u003c\/strong\u003e\u003cbr\u003eYes; correct wire helps achieve even field strength under IEC 60118-4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs protective tape needed?\u003c\/strong\u003e\u003cbr\u003eFor floor runs, loop warning tape such as the FWT 001 protects the wire.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513306860,"sku":"PLW F500","price":620.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/plw_f500_nb.png?v=1784686692"},{"product_id":"williams-av-fwt-001-cloth-based-protective-loop-warning-tape","title":"Williams AV FWT 001 – Cloth Loop Wire Protective Tape","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV FWT 001\u003c\/strong\u003e is a cloth-based protective tape for securing and covering hearing-loop wire during installation. It holds loop wire in place and shields it under carpet or flooring while the loop is commissioned.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe FWT 001 is a fabric loop tape used to fix perimeter loop wire to the subfloor and protect it during and after installation, keeping the run flat and out of sight. It is a standard install consumable for room-perimeter hearing loops. Use it with induction \u003ca href=\"https:\/\/creationnetworks.net\/search?q=PLW%20loop%20wire\"\u003eloop wire\u003c\/a\u003e and a Williams AV loop amplifier.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecures loop wire\u003c\/strong\u003e — Holds the conductor in place on the subfloor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects the run\u003c\/strong\u003e — Shields wire under carpet or flooring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCloth-based\u003c\/strong\u003e — Fabric tape suited to floor installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eCloth loop wire protective tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eUse\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eSecuring and protecting loop wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513339628,"sku":"FWT 001","price":155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/FWT-001-Loop-Tape.png?v=1784686629"},{"product_id":"williams-av-plm-001-nylon-fabric-mat-with-ten-turn-loop","title":"Williams AV PLM 001 – Ten-Turn Loop Mat","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV PLM 001\u003c\/strong\u003e is a nylon-fabric mat with a built-in ten-turn loop, providing a portable counter loop that delivers speech to telecoil hearing aids without a permanent install.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe PLM 001 places a ready-made ten-turn loop inside a durable nylon mat, so staff can lay it on or under a counter and connect it to a counter loop amplifier for immediate assistive listening. It is a convenient option for service points that cannot house a fixed coil. Use it with a counter loop amplifier such as the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL102\"\u003eDL102\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in ten-turn loop\u003c\/strong\u003e — Ready-made coil inside the mat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortable\u003c\/strong\u003e — Lay it on or under a counter without a fixed install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable\u003c\/strong\u003e — Nylon-fabric construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier match\u003c\/strong\u003e — Works with counter loop drivers like the DL102.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eLoop mat with integrated coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eTurns\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eNylon fabric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eUse with\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eCounter loop amplifiers (e.g. DL102)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513372396,"sku":"PLM 001","price":84.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/plm_001_4c60c0d9-442c-4432-aa44-448dabbd3550.png?v=1784686679"},{"product_id":"williams-av-plm-fsmp-field-strength-meter","title":"Williams AV PLM FSMP – Hearing Loop Field Strength Meter","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV PLM FSMP\u003c\/strong\u003e is a field strength meter for commissioning and verifying hearing-loop installations. It lets an installer measure the magnetic field a loop produces and confirm it meets IEC 60118-4 performance across the listening area.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe PLM FSMP measures loop magnetic field strength so an installer can set levels correctly and document that a hearing loop delivers even, compliant coverage. Verifying field strength is a required step for IEC 60118-4 sign-off and for demonstrating a loop performs as designed. It is an essential tool for anyone installing or servicing Williams AV loop amplifiers such as the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL107%20NET\"\u003eDL107\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL210%20NET%202.0\"\u003eDL210\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eField measurement\u003c\/strong\u003e — Reads loop magnetic field strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance verification\u003c\/strong\u003e — Supports IEC 60118-4 commissioning and sign-off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaller tool\u003c\/strong\u003e — Sets and documents even coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortable\u003c\/strong\u003e — Handheld for on-site testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCommissioning new hearing-loop installations\u003c\/li\u003e\n\u003cli\u003eServicing and re-verifying existing loops\u003c\/li\u003e\n\u003cli\u003eDocumenting IEC 60118-4 compliance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eHearing loop field strength meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003ePurpose\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eMeasure and verify loop field strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eSupports IEC 60118-4 verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the meter measure?\u003c\/strong\u003e\u003cbr\u003eThe magnetic field strength a hearing loop produces in the listening area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is that needed?\u003c\/strong\u003e\u003cbr\u003eIEC 60118-4 sign-off requires verifying the loop delivers even, compliant field strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho uses it?\u003c\/strong\u003e\u003cbr\u003eInstallers and service technicians commissioning or checking hearing loops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with any loop amplifier?\u003c\/strong\u003e\u003cbr\u003eYes; it measures the field regardless of which loop amplifier drives it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it portable?\u003c\/strong\u003e\u003cbr\u003eYes; it is a handheld tool for on-site testing.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513437932,"sku":"PLM FSMP","price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/PR-FSMP.png?v=1784686680"},{"product_id":"williams-av-plr-bp1-induction-loop-body-pack-receiver","title":"Williams AV PLR BP1 – Induction Loop Body-Pack Receiver","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV PLR BP1\u003c\/strong\u003e is a body-pack receiver that picks up a hearing-loop signal and delivers it through headphones, letting patrons without a telecoil hearing aid use an existing induction loop.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe PLR BP1 receives the magnetic field from an installed hearing loop and outputs it to earphones or a headset, extending loop access to people who do not have a telecoil hearing aid. This makes a single loop serve both hearing-aid users and patrons who need a loaner receiver, which helps venues meet assistive-listening obligations with one system. Pair it with \u003ca href=\"https:\/\/creationnetworks.net\/search?q=EAR%20earphone\"\u003eearphones\u003c\/a\u003e and any Williams AV hearing loop.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop reception\u003c\/strong\u003e — Picks up the loop field for non-telecoil users.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output\u003c\/strong\u003e — Delivers audio via earphones or a headset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWider access\u003c\/strong\u003e — Lets one loop serve more patrons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody-pack form\u003c\/strong\u003e — Wearable for hands-free listening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eInduction loop body-pack receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eHeadphone \/ earphone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eUse with\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eAny installed hearing loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513470700,"sku":"PLR BP1","price":177.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/PLR-BP1.png?v=1784686683"},{"product_id":"williams-av-rpk-010-rack-wall-mount-kit-for-dl104-hearing-loop-amplifier","title":"Williams AV RPK 010 – Rack \u0026 Wall Mount Kit for DL104","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWilliams AV RPK 010\u003c\/strong\u003e is a rack and wall mount kit for the DL104 hearing loop amplifier, letting integrators secure the amplifier in an equipment rack or on a wall.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe RPK 010 provides the brackets and hardware to mount a DL104 loop amplifier either in a standard equipment rack or on a wall, keeping the unit secure and tidy in a permanent install. It is the recommended mounting accessory when a DL104 is placed in an AV rack or a back-of-house wall location. Use it with the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DL%20104-00\"\u003eDL 104-00 amplifier\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack or wall\u003c\/strong\u003e — Mounts the DL104 in a rack or on a wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure fit\u003c\/strong\u003e — Brackets and hardware included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDL104 specific\u003c\/strong\u003e — Designed for the DL104 amplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eRack and wall mount kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eDL104 hearing loop amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px\"\u003eWilliams AV manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFull specifications: \u003ca href=\"https:\/\/williamsav.com\/hearing-loop-products\/\"\u003eWilliams AV hearing-loop products\u003c\/a\u003e.\u003c\/p\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":47976513503468,"sku":"RPK 010","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/RPK-016-_DL-104-Mount-Kit-web.png?v=1784686697"}],"url":"https:\/\/creationnetworks.net\/collections\/williams-av-hearing-loop.oembed","provider":"Creation Networks","version":"1.0","type":"link"}