{"title":"Wall Plates, Table Boxes \u0026 Floor Boxes","description":"\u003cp\u003eAV wall plates, table boxes, cable cubbies and floor boxes that bring HDMI, USB, network, power and audio connections to the conference table, lectern and wall. Call (888) 230-3661 for help choosing connectivity.\u003c\/p\u003e","products":[{"product_id":"attero-tech-axpio-2-channel-axiom-bus-analog-input-and-output-audio-expander-for-use-with-axiom-wall-plates","title":"QSC Attero Tech AXPIO – 2-Channel Axiom Bus Analog I\/O Audio Expander","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Attero Tech by QSC AXPIO is a two-channel Axiom Series analog audio expander that extends portable and local audio sources into an installed AV system over standard, non-networked CAT-5 cabling. It pairs with Axiom single-gang wallplates to bring USB, Bluetooth, or XLR audio inputs from a room location back to a mixer, DSP, or other audio destination. Its two Flex I\/O channels can be configured as inputs, outputs, or a mix, making it a flexible point-to-point analog audio extension solution for conference rooms and huddle rooms. With RS-232 control connectivity, the AXPIO integrates cleanly into a networked AV control environment such as the Q-SYS Ecosystem.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;gap:12px;overflow-x:auto;-webkit-overflow-scrolling:touch;padding-bottom:8px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/qsc-attero-tech-axpio-2-channel-axiom-bus-analog-input-and-output-audio-expander-for-use-with-axiom-wall-plates-creation-networks-39438.jpg?v=1757886876\" alt=\"QSC Attero Tech AXPIO – 2-Channel Axiom Bus Analog I\/O Audio Expander - Creation Networks\" style=\"max-width:320px;width:100%;height:auto;flex:0 0 auto;border-radius:6px;\"\u003e\u003c\/div\u003e\n\u003cp\u003eThe Axiom Series provides a simple, flexible, and cost-effective approach to point-to-point analog audio extension where a full networked-audio deployment is not required. The AXPIO audio expander offers two Flex I\/O channels, configurable as 2x0, 1x1, or 0x2, and pairs with up to two Axiom wallplates, letting an integrator bring portable audio devices into a room's audio system using inexpensive, readily available CAT-5 cabling rather than dedicated audio home-runs. The single 8P8C connection carries balanced line-level analog audio, RS-232 control, and 24V DC power on one cable run. Because the link is point-to-point and analog, the AXPIO is well suited to huddle rooms, conference rooms, and presentation spaces that need a clean connection point for laptops, phones, and microphones at the wall. Each expander also provides RS-232 connectivity for control integration into a networked AV system, allowing the device to participate in a larger control design such as the Q-SYS Ecosystem. It pairs naturally with a Q-SYS processor such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/qsc-core-8-flex\"\u003eQSC Core 8 Flex\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-channel Flex I\/O\u003c\/strong\u003e — Provides two configurable analog audio channels (2x0, 1x1, or 0x2) for bringing room-level sources into an installed AV system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint-to-point CAT-5 extension\u003c\/strong\u003e — Extends balanced line-level audio over standard, non-networked CAT-5\/6 cabling for low-cost installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-cable power and control\u003c\/strong\u003e — Carries audio, RS-232 control, and 24V DC power over one 8P8C connection to simplify wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxiom wallplate pairing\u003c\/strong\u003e — Pairs with up to two Axiom single-gang USB, Bluetooth, or XLR wallplates for flexible input options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable gain staging\u003c\/strong\u003e — Input gain ranges from -4 dB to +20 dB and output gain from 0 dB to +24 dBu for proper level matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 control connectivity\u003c\/strong\u003e — Integrates into a networked AV control system such as the Q-SYS Ecosystem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHuddle room\u003c\/strong\u003e — Wall-located connection point for portable BYOD audio sources over a single CAT-5 run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference room\u003c\/strong\u003e — Analog audio extension from the wall to a rack-mounted DSP or mixer without dedicated home-runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoardroom\u003c\/strong\u003e — Clean integration of presenter laptops and devices into the room AV system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTraining room\u003c\/strong\u003e — Local microphone and program inputs extended over inexpensive structured cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Flex I\/O configurability supports changing room source requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAxiom Series analog audio expander\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e2 Flex I\/O (configurable 2x0, 1x1, 0x2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Transport\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eBalanced line-level analog over non-networked CAT-5\/6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eInput Gain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e-4 dB to +20 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutput Gain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e0 dB to +24 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMax Input \/ Output Level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e+24 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8P8C (audio, RS-232, 24V DC power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWallplate Pairing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to two Axiom wallplates (USB, Bluetooth, or XLR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRS-232 for networked AV \/ Q-SYS Ecosystem integration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e0.8 lb (0.4 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from QSC \/ Attero Tech. Refer to the official Axiom AXPIO specification sheet for complete details.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the AXPIO do?\u003c\/strong\u003e\u003cbr\u003eIt extends two channels of analog audio between an Axiom wallplate and a mixer, DSP, or other destination over standard CAT-5\/6 cabling, providing a clean room-level connection point for portable audio devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require a Dante or Q-SYS audio network?\u003c\/strong\u003e\u003cbr\u003eNo. The AXPIO uses point-to-point analog extension over non-networked CAT-5\/6. It can be controlled and integrated into a Q-SYS or other networked AV system via RS-232.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wallplates does it work with?\u003c\/strong\u003e\u003cbr\u003eIt pairs with up to two Axiom single-gang wallplates offering USB, Bluetooth, or XLR audio inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e\u003cbr\u003ePower, audio, and RS-232 control all travel over the single 8P8C cable run, with the device receiving 24V DC, simplifying installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat about warranty and support?\u003c\/strong\u003e\u003cbr\u003eRefer to QSC \/ Attero Tech warranty terms for coverage. For integration and purchasing questions, contact Creation Networks support.\u003c\/p\u003e","brand":"QSC","offers":[{"title":"Default Title","offer_id":42273337540844,"sku":"AXPIO","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/qsc-attero-tech-axpio-2-channel-axiom-bus-analog-input-and-output-audio-expander-for-use-with-axiom-wall-plates-creation-networks-39438.jpg?v=1757886876"},{"product_id":"crestron-hd-wp-4k-401-c-4k-multi-window-video-processor-with-hdbaset®-hdmi®-outputs","title":"Crestron HD-WP-4K-401-C 4K Multi-Window Video Processor with HDBaseT® \u0026 HDMI® Outputs (Limited Supply)","description":"\u003ch2\u003eCrestron HD-WP-4K-401-C – 4K60 4:4:4 4×1 HDMI Wall Plate Presentation System\u003c\/h2\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-hd-wp-4k-401-c-4x1-4k60-4-4-4-hdmi-r-wall-plate-presentation-system-creation-networks-87505.png\" alt=\"Crestron HD-WP-4K-401-C 4x1 4K60 HDMI Wall Plate Presentation System\" style=\"max-width:100%;height:auto;\"\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Crestron HD-WP-4K-401-C is a 4×1 4K60 4:4:4 HDMI wall plate presentation system — a decora-style in-wall unit that combines four HDMI inputs, auto-switching, integrated audio DSP with microphone input, RS-232 and IR display control, and a direct HDMI output to the display in a single wall plate chassis. No separate equipment rack or display-end receiver is required for the video path — the wall plate connects directly via HDMI to a nearby display. Designed for small and medium conference rooms and training spaces where a clean, all-in-one wall plate solution is preferred over rack-mount AV equipment.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 HDMI Inputs, 1 Direct HDMI Output:\u003c\/strong\u003e Four source connections at the wall plate output directly to a display via HDMI — no CATx run or separate receiver required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K60 4:4:4:\u003c\/strong\u003e Full 4K resolution and color fidelity from wall plate to display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Audio DSP:\u003c\/strong\u003e Built-in audio processing with microphone input and echo cancellation for conferencing without a separate DSP unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-Switching:\u003c\/strong\u003e Automatically selects the active HDMI input — operator-free in standard multi-source environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Display Control:\u003c\/strong\u003e Controls the connected display directly from the wall plate without a separate control processor for basic display management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrestron 4-Series Integration:\u003c\/strong\u003e Ethernet control for full touch panel room automation when a control processor is deployed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSmall conference rooms requiring a clean, wall plate all-in-one AV solution\u003c\/li\u003e\n\u003cli\u003eTraining rooms with HDMI sources at the podium or presentation wall\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces replacing tabletop switchers and rack equipment\u003c\/li\u003e\n\u003cli\u003eHuddle rooms requiring integrated audio DSP and source switching in one unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eInputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003e4 × HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003e1 × HDMI (4K60 4:4:4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eAudio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003eIntegrated DSP, mic input with AEC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eDisplay Control\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003eRS-232, IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSwitching\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003eAuto-switching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003eDecora wall plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:6px;border:1px solid #ddd;\"\u003eHD-WP-4K-401-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this require a Crestron control processor?\u003c\/strong\u003e\u003cbr\u003eNo — for basic auto-switching and display control it operates standalone. For full touch panel automation, a Crestron 4-Series processor connects via Ethernet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a CATx receiver required at the display?\u003c\/strong\u003e\u003cbr\u003eNo — the HD-WP-4K-401-C outputs direct HDMI to the display. It is an all-in-one wall plate system, not an extension system requiring a separate receiver.\u003c\/p\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":42273544667372,"sku":"HD-WP-4K-401-C","price":7084.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-hd-wp-4k-401-c-4k-multi-window-video-processor-with-hdbaset-r-and-hdmi-r-outputs-creation-networks-20638.png?v=1757888136"},{"product_id":"crestron-dm-rmc-4k-100-c-1g-w-t-wall-plate-4k-digitalmedia-8g-®-receiver-amp-room-controller-100-white-textured","title":"Crestron DM-RMC-4K-100-C-1G-W-T Wall Plate 4K DigitalMedia 8G+® Receiver \u0026amp; Room Controller 100, White Textured","description":"\u003ch2\u003eCrestron DM-RMC-4K-100-C-1G-W-T – DM Lite 4K60 Receiver and Room Controller, Wall Plate, White\u003c\/h2\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-dm-rmc-4k-100-c-1g-w-t-dm-lite-receiver-room-controller-wall-plate-white-creation-networks.jpg\" alt=\"Crestron DM-RMC-4K-100-C-1G-W-T DM Lite 4K60 receiver room controller wall plate white single-gang\" style=\"max-width:480px;height:auto;display:block;margin-bottom:20px;\"\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Crestron DM-RMC-4K-100-C-1G-W-T is a DM Lite 4K60 receiver and room controller in a single-gang wall plate form factor, white textured finish. It receives a DM Lite CATx signal from a compatible wall plate transmitter at the presenter position and outputs 4K60 HDMI at the display wall position, with built-in room control functions (RS-232, IR, relay) in the same wall plate unit. Designed for display wall installation where a flush wall plate mounting of the receiver behind or adjacent to a wall-mounted display is required rather than a separate rack-mount receiver chassis.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDM Lite Receiver, Wall Plate Form Factor:\u003c\/strong\u003e Flush wall plate installation at the display position — no separate receiver chassis or AV rack required for the receiver end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K60 HDMI Output:\u003c\/strong\u003e 4K60 HDMI to the wall-mounted display from the DM Lite CATx signal received from the transmitter wall plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Room Controller:\u003c\/strong\u003e RS-232, IR, and relay at the display wall for display control without separate control wiring from the AV rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Gang, White Textured:\u003c\/strong\u003e Installs in a standard single-gang wall box; white textured finish for white wall and display wall installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDM-RMC-4K-100-C-1G-W-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eInput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDM Lite over Cat5e or Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eHDMI (4K60)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eSingle-gang wall plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eWhite textured\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRoom Control\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eRS-232, IR, relay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDM-RMC-4K-100-C-1G-W-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eCompetitor comparison: not applicable for this product.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat transmitter pairs with this wall plate receiver?\u003c\/strong\u003e\u003cbr\u003e\nCompatible DM Lite transmitter wall plates include the HD-TXC-4KZ-101-1G-B\/W, HD-TX-4KZ-211-2G-B, and other DM Lite transmitters. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e to confirm transmitter compatibility and wall plate pairing for your room.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003e\nCrestron provides a standard 3-year limited warranty. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e for warranty details.\u003c\/p\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":42273793671404,"sku":"DM-RMC-4K-100-C-1G-W-T","price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-dm-rmc-4k-100-c-1g-w-t-wall-plate-4k-digitalmedia-8g-r-receiver-andamp-room-controller-100-white-textured-creation-networks-50504.jpg?v=1757889104"},{"product_id":"crestron-dm-tx-4kz-100-c-1g-w-t-digitalmedia-8g-®-4k60-4-4-4-hdr-wall-plate-transmitter-white","title":"Crestron DM-TX-4KZ-100-C-1G-W-T DigitalMedia 8G+® 4K60 4:4:4 HDR Wall Plate Transmitter, White","description":"\u003ch2\u003eCrestron DM-TX-4KZ-100-C-1G-W-T – DM Lite 4K60 Transmitter, Wall Plate, White Textured\u003c\/h2\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-dm-tx-4kz-100-c-1g-w-t-dm-lite-4k60-transmitter-wall-plate-white-creation-networks.jpg\" alt=\"Crestron DM-TX-4KZ-100-C-1G-W-T DM Lite 4K60 HDMI transmitter wall plate white single-gang\" style=\"max-width:480px;height:auto;display:block;margin-bottom:20px;\"\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Crestron DM-TX-4KZ-100-C-1G-W-T is a DM Lite 4K60 HDMI transmitter in a single-gang wall plate form factor, white textured finish. It connects an HDMI source at the presenter wall plate position and transmits the 4K60 HDMI signal along with USB, RS-232, and IR over a single Cat5e or Cat6 cable to a compatible DM Lite receiver at the AV rack or display position. A single-input (HDMI only) transmitter wall plate for rooms where only HDMI presenter connectivity is required at the wall plate position, without VGA or USB-C switching.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K60 HDMI Transmitter, Wall Plate:\u003c\/strong\u003e Single-gang white wall plate transmits 4K60 HDMI from the presenter connection point over CATx to the DM Lite receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Cat5e\/Cat6 Cable:\u003c\/strong\u003e HDMI, USB, RS-232, and IR all carry over one CATx cable to the receiver end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Powered from Receiver:\u003c\/strong\u003e No local power supply required at the wall plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Textured Finish:\u003c\/strong\u003e Single-gang wall box installation; white textured finish for white wall plate environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDM-TX-4KZ-100-C-1G-W-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eVideo Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eHDMI (4K60)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eTransmission\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDM Lite over Cat5e or Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eSingle-gang wall plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eWhite textured\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003ePoE from receiver over CATx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDM-TX-4KZ-100-C-1G-W-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eCompetitor comparison: not applicable for this product.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat receiver pairs with this transmitter?\u003c\/strong\u003e\u003cbr\u003e\nCompatible DM Lite receivers include the DM-RMC-4KZ-100-C and DM-RMC-4K-100-C-1G-B\/W-T wall plate receivers. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e for transmitter\/receiver pairing guidance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003e\nCrestron provides a standard 3-year limited warranty. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e for warranty details.\u003c\/p\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":42273793999084,"sku":"DM-TX-4KZ-100-C-1G-W-T","price":1210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-dm-tx-4kz-100-c-1g-w-t-digitalmedia-8g-r-4k60-4-4-4-hdr-wall-plate-transmitter-white-creation-networks-37861.png?v=1757889106"},{"product_id":"crestron-dm-tx-4kz-100-c-1g-b-t-digitalmedia-8g-®-4k60-4-4-4-hdr-wall-plate-transmitter-black","title":"Crestron DM-TX-4KZ-100-C-1G-B-T – DM 8G+ 4K60 4:4:4 HDR Wall Plate Transmitter, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Crestron DM-TX-4KZ-100-C-1G-B-T is a single-gang DigitalMedia 8G+® wall plate transmitter delivering 4K60 4:4:4 HDR video over a single CAT5e or Cat6 cable to any DM-compatible switcher or receiver. Built for commercial AV deployments where black wall plate finishes are specified, it provides an HDMI input with built-in IR and RS-232 control ports in a 1-gang form factor. Using Crestron DM 4KZ technology with VESA Display Stream Compression (DSC), the device handles 4K60 4:4:4 and HDR signals that would otherwise exceed standard cable bandwidth. It is also HDBaseT compatible, allowing direct connection to third-party HDBaseT receivers without requiring a Crestron DM receiver.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-dm-tx-4kz-100-c-1g-b-t-digitalmedia-8g-r-4k60-4-4-4-hdr-wall-plate-transmitter-black-creation-networks-12690.png?v=1757889106\" alt=\"Crestron DM-TX-4KZ-100-C-1G-B-T – DM 8G+ 4K60 4:4:4 HDR Wall Plate Transmitter, Black - Creation Networks\" style=\"max-width:480px;height:auto;display:block;margin-bottom:20px;\"\u003e\n\u003cp\u003eThe DM-TX-4KZ-100-C-1G-B-T serves as the presenter connection point in Crestron DigitalMedia systems, consolidating HDMI video, audio, control, and power over one RJ-45 connection. DM 4KZ technology uses VESA Display Stream Compression (DSC) — a lightweight, line-based 2:1 standard — to deliver visually lossless 4K60 4:4:4 performance. Standard 4K30 4:4:4 and lower signals pass through fully uncompressed. Compatible with DM 8G+, DM Ultra, and third-party CAT5e or Cat6 cable, the transmitter reaches up to 330 ft (100 m) for 4K UHD using DM Ultra cable, and up to 165 ft (50 m) using standard CAT5e for 4K signals.\u003c\/p\u003e\n\u003cp\u003eThe HDMI input supports HDCP 2.2, Deep Color, 3D, Dolby TrueHD, Dolby Atmos, DTS HD Master Audio, and uncompressed 7.1 LPCM audio. Built-in IR and RS-232 ports enable programmable source device control through a Crestron control system, with CEC pass-through supported. Power is delivered via the DM connection (PoDM \/ HDBaseT PoE, IEEE 802.3at Type 1 Class 3), eliminating the need for a local outlet at the wall plate position. An optional PW-2407WUL 24 VDC power pack is available for installations without a PoDM-capable downstream device. The 1-gang form factor installs into a standard electrical box or plaster ring and includes a surface-mount bracket for table or rack rail attachment. The black textured finish accepts the FP-G1-B-T decorator faceplate (sold separately) for a finished commercial installation. The DM-TX-4KZ-100-C-1G-B-T is a direct drop-in replacement for the DM-TX-4K-100-C-1G-B-T with no cable or switcher changes required.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K60 4:4:4 and HDR10 Support\u003c\/strong\u003e — DM 4KZ technology with VESA DSC delivers visually lossless 4K60 4:4:4 and HDR10 over standard CATx infrastructure without replacing cable or switchers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle HDMI Input\u003c\/strong\u003e — 19-pin Type A connector; DVI and Dual-Mode DisplayPort source compatible via adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDM 8G+ Output over Single CATx Cable\u003c\/strong\u003e — Carries video, audio, control, Ethernet, and power to a DM switcher or receiver via CAT5e, DM 8G, or DM Ultra cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT Compatibility\u003c\/strong\u003e — Connects directly to third-party HDBaseT compliant receivers or display devices, no DM receiver required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 330 ft (100 m) Transmission\u003c\/strong\u003e — 1080p\/WUXGA\/2K at 330 ft via DM Ultra or DM 8G cable; 4K UHD up to 330 ft via DM Ultra, 230 ft via DM 8G, 165 ft via CAT5e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.2 Compliance\u003c\/strong\u003e — Supports protected content from Blu-ray, streaming devices, and other HDCP 2.2 sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR and RS-232 Control Ports\u003c\/strong\u003e — Source device control via CEC, 1-way IR (up to 1.1 MHz), or bidirectional RS-232 (up to 115.2k baud) through a connected Crestron control system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower over DM (PoDM) \/ HDBaseT PoE\u003c\/strong\u003e — IEEE 802.3at Type 1 Class 3 (12.95 W); powered from the DM switcher or receiver, no local power supply required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLossless Audio Formats\u003c\/strong\u003e — Dolby TrueHD, Dolby Atmos, DTS HD Master Audio, DTS HD High Res, DTS 96\/24, and uncompressed 7.1 LPCM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Gang Wall Plate Form Factor\u003c\/strong\u003e — Mounts in standard 1-gang electrical box, plaster ring, flat surface via included bracket, or single 19-inch rack rail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in Replacement\u003c\/strong\u003e — Replaces DM-TX-4K-100-C-1G-B-T in existing DM 8G installations; no cable or switcher replacement required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Textured Finish\u003c\/strong\u003e — Matches commercial black wall plate specifications; FP-G1-B-T decorator faceplate sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;min-width:420px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDM-TX-4KZ-100-C-1G-B-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eVideo Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eHDMI (DVI \/ Dual-Mode DisplayPort compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eMax Input Resolution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e3840×2160 (4K UHD) @ 60 Hz, 4:4:4, 24-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eVideo Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDM 8G+ \/ HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCopy Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eAudio Formats\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDolby TrueHD, Dolby Atmos, DTS HD Master Audio, DTS HD High Res, DTS 96\/24, LPCM 7.1 uncompressed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eHDMI IN Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e19-pin Type A, female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eIR Port\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e2-pin 3.5 mm terminal block; 1-way IR up to 1.1 MHz or Serial TTL\/RS-232 (0–5 V) up to 19.2k baud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCOM Port (RS-232)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e3-pin 3.5 mm terminal block; bidirectional RS-232, up to 115.2k baud, software handshaking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eDM OUT Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e8-pin RJ-45 female, shielded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eMax Distance (1080p\/WUXGA\/2K)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e330 ft (100 m) — DM Ultra, DM 8G, or CAT5e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eMax Distance (4K UHD)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e330 ft (100 m) — DM Ultra; 230 ft (70 m) — DM 8G; 165 ft (50 m) — CAT5e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePower Consumption (PoDM \/ PoE)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e5.43 W typical \/ 3.25 W idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePower Consumption (24 VDC)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e5.55 W typical \/ 3.31 W idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePoE Standard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eIEEE 802.3at Type 1 Class 3 (12.95 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eOptional Power Pack\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003ePW-2407WUL — 24 VDC @ 0.75 A, 100–240 VAC input (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e32° to 95° F (0° to 35° C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eHumidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e10% to 90% RH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e1-gang wall plate \/ surface mount (bracket included) \/ rack rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eDimensions (H × W × D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e4.11 × 1.72 × 2.20 in. (105 × 44 × 56 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e8.0 oz (227 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eMetal with black polycarbonate label overlay on front panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eETL (Intertek), CE, IC, FCC Part 15 Class B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the DM-TX-4KZ-100-C-1G-B-T and DM-TX-4KZ-100-C-1G-W-T?\u003c\/strong\u003e\u003cbr\u003eFinish only — black textured vs. white textured. All functional specifications, connectors, and compatibility are identical. Select based on the wall plate color specification at the project site. The \u003ca href=\"https:\/\/creationnetworks.net\/products\/crestron-dm-tx-4kz-100-c-1g-w-t-digitalmedia-8g-r-4k60-4-4-4-hdr-wall-plate-transmitter-white\"\u003ewhite version (DM-TX-4KZ-100-C-1G-W-T)\u003c\/a\u003e is also available at Creation Networks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable is required for 4K60 4:4:4 performance?\u003c\/strong\u003e\u003cbr\u003eThe HDMI cable from source to wall plate must support 18 Gbps TMDS bandwidth. For the DM 8G+ run: up to 165 ft (50 m) using third-party CAT5e or Cat6; up to 230 ft (70 m) using Crestron DM-CBL-8G; up to 330 ft (100 m) using Crestron DM Ultra cable (DMB-CBLULTRA).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the DM-TX-4KZ-100-C-1G-B-T compatible with existing DM 8G installations?\u003c\/strong\u003e\u003cbr\u003eYes. It is a direct drop-in replacement for the DM-TX-4K-100-C-1G-B-T using the same DM 8G+ output and infrastructure. No cable or switcher replacement is required; additional programming may be needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the wall plate include a faceplate?\u003c\/strong\u003e\u003cbr\u003eNo. The unit mounts in a standard 1-gang 2-1\/8 in. deep electrical box or plaster ring (not included). The black textured decorator faceplate FP-G1-B-T is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the device powered?\u003c\/strong\u003e\u003cbr\u003ePrimarily via PoDM (Power over DigitalMedia) or HDBaseT PoE from the connected DM switcher or receiver — no local power supply needed at the wall plate. If the downstream device does not provide PoDM or PoE, use the optional PW-2407WUL 24 VDC wall mount power pack (sold separately).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the IR and RS-232 ports work with any DM receiver?\u003c\/strong\u003e\u003cbr\u003eIR and RS-232 control ports are enabled only when the DM-TX-4KZ-100-C-1G-B-T connects to an Ethernet-enabled DM receiver or switcher addressable from a Crestron control system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty on this product?\u003c\/strong\u003e\u003cbr\u003eThe DM-TX-4KZ-100-C-1G-B-T is covered under Crestron's standard limited warranty. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e for support and warranty service.\u003c\/p\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":42273794359532,"sku":"DM-TX-4KZ-100-C-1G-B-T","price":1210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-dm-tx-4kz-100-c-1g-b-t-digitalmedia-8g-r-4k60-4-4-4-hdr-wall-plate-transmitter-black-creation-networks-12690.png?v=1757889106"},{"product_id":"crestron-usb-ext-2-local-1g-b-usb-over-category-cable-extender-wall-plate-local-black","title":"Crestron USB-EXT-2-LOCAL-1G-B  USB over Category Cable Extender Wall Plate, Local, Black","description":"\u003ch2\u003eCrestron USB-EXT-2-LOCAL-1G-B – USB 2.0 Extender Local Module, Single-Gang Wall Plate, Black\u003c\/h2\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-usb-ext-2-local-1g-b-usb-over-category-cable-extender-local-single-gang-wall-plate-black-creation-networks.png\" alt=\"Crestron USB-EXT-2-LOCAL-1G-B USB 2.0 extender local single-gang wall plate black host side AV rack\" style=\"max-width:480px;height:auto;display:block;margin-bottom:20px;\"\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Crestron USB-EXT-2-LOCAL-1G-B is the single-gang black wall plate version of the USB-EXT-2 local (host-side) module, providing a flush wall plate mounting option for the AV rack or host-side USB extender connection in commercial AV installations where a clean wall plate appearance is required at the host connection point. Functionally identical to the surface-mount USB-EXT-2-LOCAL, it installs in a standard single-gang wall box and pairs with the USB-EXT-2-REMOTE-1G-B or standard USB-EXT-2-REMOTE to extend USB 1.1 and 2.0 signals up to 100 meters over Cat5e or Cat6.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eIn some commercial AV installations, the USB host connection at the AV rack or equipment location is best served by a flush wall plate rather than a surface-mount module — particularly when the AV equipment is in a wall-recessed AV bay, behind a display that uses a flush wall box for all connections, or in a furniture installation where a wall plate appearance is required at the UC compute module end. The USB-EXT-2-LOCAL-1G-B provides the wall plate format for these installations, mounting in a standard single-gang wall box with a black finish that matches adjacent data and control wall plates. The single RJ45 jack on the wall plate connects to the Cat5e or Cat6 cable running to the remote module at the conference table or device location. All USB 2.0 extension performance characteristics are identical to the standard USB-EXT-2-LOCAL.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Gang Wall Plate, Black:\u003c\/strong\u003e Flush wall plate local module installs in a standard single-gang wall box — clean black wall plate appearance at the host USB connection point, matching adjacent AV and data wall plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHost-Side USB 2.0 Extension:\u003c\/strong\u003e Connects to USB host port on UC compute module, PC, or AV rack equipment; extends USB 1.1 and 2.0 signals to the remote module at up to 100m over Cat5e or Cat6.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCat5e\/Cat6 Infrastructure:\u003c\/strong\u003e Standard Cat5e or Cat6 UTP to the remote module — no proprietary cable required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play:\u003c\/strong\u003e No drivers required — USB devices at the remote end appear as direct USB connections to the host.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eUSB-EXT-2-LOCAL-1G-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModule Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eLocal (host side), single-gang wall plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eUSB Standards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eUSB 1.1 and USB 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eMaximum Distance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e100 m (330 ft) to remote module over Cat5e or Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePaired With\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eUSB-EXT-2-REMOTE-1G-B or USB-EXT-2-REMOTE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eUSB-EXT-2-LOCAL-1G-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eCompetitor comparison: not applicable for this product.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between USB-EXT-2-LOCAL and USB-EXT-2-LOCAL-1G-B?\u003c\/strong\u003e\u003cbr\u003e\nThe USB-EXT-2-LOCAL is a surface-mount module; the USB-EXT-2-LOCAL-1G-B is the single-gang black wall plate version for flush wall box installation at the host end. Both are functionally identical. Select based on the preferred form factor at the UC compute module or host connection location. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e for guidance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the USB-EXT-2-LOCAL-1G-B?\u003c\/strong\u003e\u003cbr\u003e\nCrestron provides a standard 3-year limited warranty. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e for warranty service details.\u003c\/p\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":42273800749292,"sku":"USB-EXT-2-LOCAL-1G-B","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-usb-ext-2-local-1g-b-usb-over-category-cable-extender-wall-plate-local-black-creation-networks-38018.png?v=1757889143"},{"product_id":"crestron-usb-ext-2-remote-1g-b-usb-over-category-cable-extender-wall-plate-remote-black","title":"Crestron USB-EXT-2-REMOTE-1G-B  USB over Category Cable Extender Wall Plate, Remote, Black","description":"\u003ch2\u003eCrestron USB-EXT-2-REMOTE-1G-B – USB 2.0 Extender Remote Module, Single-Gang Wall Plate, Black\u003c\/h2\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-usb-ext-2-remote-1g-b-usb-over-category-cable-extender-remote-single-gang-wall-plate-black-creation-networks.png\" alt=\"Crestron USB-EXT-2-REMOTE-1G-B USB 2.0 extender remote single-gang wall plate black conference table device side\" style=\"max-width:480px;height:auto;display:block;margin-bottom:20px;\"\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Crestron USB-EXT-2-REMOTE-1G-B is the single-gang black wall plate version of the USB-EXT-2 remote (device-side) module, providing a flush wall plate USB-A connection point at the conference table wall, podium, or peripheral device location for USB 2.0 signal extension back to the AV rack host over Cat5e or Cat6. Functionally identical to the surface-mount USB-EXT-2-REMOTE, it installs in a standard single-gang wall box with a black finish and pairs with the USB-EXT-2-LOCAL-1G-B or standard USB-EXT-2-LOCAL for USB extension up to 100 meters.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe wall plate format of the USB-EXT-2-REMOTE-1G-B is the standard specification for conference rooms where the USB device connection at the table or wall position needs to appear as a flush-mounted wall plate rather than a surface-mount module sitting on the conference table or mounted to the wall with visible hardware. Installing in a standard single-gang wall box, it presents a clean USB-A port at the wall plate face — where a USB camera, speakerphone, or other USB device connects — with the Cat5e or Cat6 cable running back through the wall to the USB-EXT-2-LOCAL at the AV rack. The black finish matches standard commercial wall plate conventions in conference rooms, meeting spaces, and executive areas where black is the wall plate color standard. Bus-powered from the local module over the CATx cable, no local power supply is required at the wall plate location.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Gang Wall Plate, Black:\u003c\/strong\u003e Flush wall plate remote module for clean USB-A device connection at the conference table wall or podium wall plate position — integrates with adjacent HDMI, data, and AV wall plates in a consistent commercial wall plate installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDevice-Side USB 2.0 Extension:\u003c\/strong\u003e Provides the USB device connection point at the table or wall; signals extend to the AV rack local module at up to 100m over Cat5e or Cat6.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus-Powered from Local Module:\u003c\/strong\u003e No local power supply or AC outlet required at the wall plate remote module location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play:\u003c\/strong\u003e No drivers required — USB devices connected at the wall plate appear as direct USB connections to the AV rack host computer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eUSB-EXT-2-REMOTE-1G-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModule Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eRemote (device side), single-gang wall plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eUSB Standards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eUSB 1.1 and USB 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eMaximum Distance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e100 m (330 ft) to local module over Cat5e or Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eBus-powered from local module over CATx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePaired With\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eUSB-EXT-2-LOCAL-1G-B or USB-EXT-2-LOCAL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eUSB-EXT-2-REMOTE-1G-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eCompetitor comparison: not applicable for this product.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between USB-EXT-2-REMOTE and USB-EXT-2-REMOTE-1G-B?\u003c\/strong\u003e\u003cbr\u003e\nThe USB-EXT-2-REMOTE is a surface-mount module; the USB-EXT-2-REMOTE-1G-B is the single-gang black wall plate version for flush wall box installation at the device end. Functionally identical — select based on preferred form factor at the conference table or podium position. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e for guidance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the USB-EXT-2-REMOTE-1G-B?\u003c\/strong\u003e\u003cbr\u003e\nCrestron provides a standard 3-year limited warranty. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e for warranty service details.\u003c\/p\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":42273801011436,"sku":"USB-EXT-2-REMOTE-1G-B","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-usb-ext-2-remote-1g-b-usb-over-category-cable-extender-wall-plate-remote-black-creation-networks-64767.png?v=1757889144"},{"product_id":"crestron-dm-rmc-4k-100-c-1g-b-t-wall-plate-4k-digitalmedia-8g-®-receiver-room-controller-100-black-textured","title":"Crestron DM-RMC-4K-100-C-1G-B-T Wall Plate 4K DigitalMedia 8G+® Receiver \u0026 Room Controller 100, Black Textured","description":"\u003ch2\u003eCrestron DM-RMC-4K-100-C-1G-B-T – DM Lite 4K60 Receiver and Room Controller, Wall Plate, Black Textured\u003c\/h2\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-dm-rmc-4k-100-c-1g-b-t-dm-lite-receiver-room-controller-wall-plate-black-textured-creation-networks.jpg\" alt=\"Crestron DM-RMC-4K-100-C-1G-B-T DM Lite 4K60 receiver room controller wall plate black textured single-gang\" style=\"max-width:480px;height:auto;display:block;margin-bottom:20px;\"\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Crestron DM-RMC-4K-100-C-1G-B-T is the black textured version of the DM-RMC-4K-100-C-1G-W-T — a DM Lite 4K60 receiver and room controller in a single-gang wall plate form factor, black textured finish. Functionally identical to the white version, it receives a DM Lite CATx signal from a compatible transmitter wall plate and outputs 4K60 HDMI at the display wall position with built-in RS-232, IR, and relay room control. The black textured finish matches black commercial wall plate installations at display wall positions in conference rooms and meeting spaces where black is the standard wall plate finish.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDM Lite Receiver, Wall Plate Form Factor:\u003c\/strong\u003e Single-gang wall plate receiver at the display position — no separate rack-mount receiver chassis required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K60 HDMI Output:\u003c\/strong\u003e 4K60 HDMI output to wall-mounted display from DM Lite CATx input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Room Controller:\u003c\/strong\u003e RS-232, IR, and relay at the display wall for display control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Gang, Black Textured:\u003c\/strong\u003e Standard single-gang wall box installation; black textured finish for dark wall plate environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDM-RMC-4K-100-C-1G-B-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eInput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDM Lite over Cat5e or Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eHDMI (4K60)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eSingle-gang wall plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eBlack textured\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRoom Control\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eRS-232, IR, relay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDM-RMC-4K-100-C-1G-B-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eCompetitor comparison: not applicable for this product.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between DM-RMC-4K-100-C-1G-B-T and DM-RMC-4K-100-C-1G-W-T?\u003c\/strong\u003e\u003cbr\u003e\nBlack textured vs. white textured finish. All functional specifications are identical. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e for wall plate finish selection guidance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003e\nCrestron provides a standard 3-year limited warranty. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e for warranty details.\u003c\/p\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":42273810481388,"sku":"DM-RMC-4K-100-C-1G-B-T","price":940.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-dm-rmc-4k-100-c-1g-b-t-wall-plate-4k-digitalmedia-8g-r-receiver-and-room-controller-100-black-textured-creation-networks-17058.png?v=1757889186"},{"product_id":"copy-of-attero-tech-und6io-dante™-networked-audio-wall-plate-attero-tech-by-qsc","title":"QSC Attero Tech unD6IO – Dante\/AES67 6-In \/ 2-Out Networked Audio Wall Plate","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Attero Tech unD6IO by QSC is a Dante networked audio wall plate that puts multi-format audio I\/O exactly where it is needed in a conference room, classroom, or multi-purpose room. Designed as a Dante\/AES67 wall plate, it brings two XLR mic\/line inputs, two RCA inputs, and a 3.5 mm input onto the network over a single PoE cable, eliminating long analog cable runs back to the AV rack. As a Q-SYS audio input wall plate, it drops into a Q-SYS design by Q-SYS Extension or connects to any standard Dante network.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/qsc-dantetm-networked-audio-wall-plate-attero-tech-und6io-creation-networks-72581.jpg?v=1757890075\" alt=\"QSC Attero Tech unD6IO – Dante\/AES67 6-In \/ 2-Out Networked Audio Wall Plate - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe unD6IO is a cost-effective, multi-I\/O Dante networked audio wall plate in a dual-gang form factor, combining XLR, RCA, and 3.5 mm inputs with one 3.5 mm and two balanced line outputs. Because the plate is PoE-capable, a single CAT-5e or higher cable carries power, control, and audio data, which simplifies installation and reduces interference-prone analog wiring. The XLR inputs offer three software-selectable gain levels plus +48 V phantom power, so the same plate can accept anything from a dynamic microphone to a laptop or media player. For commercial AV deployment, the unD6IO is well suited to wall locations near presenters and source devices, feeding a centralized Q-SYS or Dante system. A Bluetooth-equipped variant is available as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/attero-tech-und6io-bt-multi-i-o-aes67-dante-wall-plate-with-bluetooth-4-x-2\"\u003eunD6IO-BT\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Format Input Array\u003c\/strong\u003e — Two balanced XLR mic\/line inputs, two RCA inputs, and one 3.5 mm input let a single wall plate accept microphones, laptops, phones, and media players without additional hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante and AES67 Networking\u003c\/strong\u003e — The plate transports audio over standard Ethernet on a single RJ-45, integrating with Q-SYS or any Dante\/AES67 network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Powered\u003c\/strong\u003e — Power, control, and audio travel over one CAT-5e or higher cable using 802.3af PoE, removing the need for a local power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware-Selectable Gain\u003c\/strong\u003e — The XLR inputs provide -18 dB, -3 dB, +25 dB, and +40 dB gain settings to match a wide range of input levels and devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e+48 V Phantom Power\u003c\/strong\u003e — Inputs 1 and 2 supply phantom power for condenser microphones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced and Unbalanced Outputs\u003c\/strong\u003e — Two balanced Euroblock outputs (with automatic muting on loss of Dante signal) and two unbalanced 3.5 mm outputs provide local monitoring or zone feeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ-SYS and Dante Domain Manager Ready\u003c\/strong\u003e — Drag-and-drop integration into a Q-SYS design and full Dante Domain Manager support streamline AV system integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room presenter and source input\u003c\/li\u003e\n\u003cli\u003eHuddle room and multi-purpose room audio connectivity\u003c\/li\u003e\n\u003cli\u003eTraining room and commercial meeting space deployments\u003c\/li\u003e\n\u003cli\u003eHouse of worship presenter input plates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Inputs\u003c\/td\u003e\n\u003ctd\u003e2 x XLR (balanced, RF filtered); 2 x RCA (stereo unbalanced); 1 x 3.5 mm (stereo unbalanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Gain\u003c\/td\u003e\n\u003ctd\u003e-18 dB, -3 dB, +25 dB, +40 dB, software selectable (Inputs 1\/2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Levels\u003c\/td\u003e\n\u003ctd\u003e+20 dBu @ -18 dB; +6 dBu @ -3 dB; -23 dBu @ +25 dB; -38 dBu @ +40 dB (Inputs 1\/2); +12 dBu (Inputs 3\/4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhantom Power\u003c\/td\u003e\n\u003ctd\u003e+48 V (Inputs 1 \u0026amp; 2 only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Outputs\u003c\/td\u003e\n\u003ctd\u003e2 x balanced line (6-pin Euroblock, auto-mute on Dante signal loss); 2 x unbalanced line (3.5 mm TRS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Attenuation\u003c\/td\u003e\n\u003ctd\u003e-60 dB to 0 dB, software controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Output Levels\u003c\/td\u003e\n\u003ctd\u003e+12 dBu (3.5 mm); +20 dBu (Euroblock) at 0 dB attenuation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork\u003c\/td\u003e\n\u003ctd\u003eStandard Ethernet, single RJ-45, CAT-5e or higher; 44.1 kHz \/ 48 kHz sample rates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePoE (802.3af)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (HWD)\u003c\/td\u003e\n\u003ctd\u003e4.2 x 3.5 x 2 in (114.3 x 88.9 x 50.8 mm); 2-gang Decora plate 4.87 x 4.94 x 0.08 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.6 lb (0.27 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs the unD6IO compatible with Q-SYS?\u003c\/strong\u003e Yes. The unD6IO integrates into a Q-SYS design through the Q-SYS Extension for drag-and-drop configuration, and it also operates on any standard Dante or AES67 network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the wall plate powered?\u003c\/strong\u003e The unD6IO is PoE-capable (802.3af), so a single CAT-5e or higher cable carries power, control, and audio with no separate power supply required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size junction box does it require?\u003c\/strong\u003e The plate uses a dual-gang Decora form factor and is designed to fit standard dual-gang US junction boxes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it support condenser microphones?\u003c\/strong\u003e Yes. Inputs 1 and 2 provide +48 V phantom power and software-selectable gain to accommodate condenser microphones and a range of line-level sources.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat about warranty and support?\u003c\/strong\u003e The unD6IO is covered under QSC warranty terms; for help specifying or integrating this product, contact Creation Networks support.\u003c\/p\u003e","brand":"QSC","offers":[{"title":"Default Title","offer_id":42449607655660,"sku":"unD6IO","price":1240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/qsc-dantetm-networked-audio-wall-plate-attero-tech-und6io-creation-networks-72581.jpg?v=1757890075"},{"product_id":"attero-tech-undx2io-dante-aes67-network-audio-wallplate-attero-tech-by-qsc","title":"QSC Attero Tech unDX2IO+ – Dante\/AES67 2+2 Input \/ 2 Output Network Audio Wall Plate","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Attero Tech unDX2IO+ by QSC is a Dante\/AES67 network audio wall plate that brings mixed mic\/line connectivity to the network at the point of use in conference rooms, hotel ballrooms, and training rooms. As a compact Dante networked audio wall plate, it provides two balanced XLR inputs, two balanced line inputs on depluggable connectors, and two balanced XLR outputs over a single PoE cable. It integrates with Q-SYS or any Dante\/AES67 network, making it a flexible Q-SYS audio input wall plate for commercial AV deployment.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/qsc-attero-tech-undx2io-danteaes67-network-audio-wallplate-2-in-xlr-x-2-in-phoenix-x-2-out-xlr-creation-networks-63587.jpg?v=1757890076\" alt=\"QSC Attero Tech unDX2IO+ – Dante\/AES67 2+2 Input \/ 2 Output Network Audio Wall Plate - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe unDX2IO+ is a cost-effective multi-I\/O Dante audio network wall plate featuring two balanced mic\/line XLR inputs, two balanced XLR line outputs, and two balanced line inputs on side-mounted depluggable connectors. All inputs and outputs can be used simultaneously and every audio channel is addressed separately on the network. The plate is designed to fit standard dual-gang US junction boxes, mud rings, and old-work brackets, and its PoE capability means a single CAT-5e or better cable carries power, control, and data. Four software-selectable input gains plus +48 V phantom power per channel let the same plate handle dynamic microphones, condenser microphones, and consumer or professional line sources. For AV system integration, the small form factor lets installers co-locate Dante connectivity near analog sources or sinks rather than running long analog cable back to the rack.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed Mic\/Line I\/O\u003c\/strong\u003e — Two balanced XLR inputs, two balanced line inputs, and two balanced XLR outputs serve both professional and consumer source types from one wall plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante and AES67 Networking\u003c\/strong\u003e — Audio transports over standard Ethernet on a single RJ-45 and integrates with Q-SYS or any Dante\/AES67 network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Powered\u003c\/strong\u003e — A single CAT-5e or better cable supplies power, control, and data via 802.3af PoE, with power consumption under 5 W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Software-Selectable Gains\u003c\/strong\u003e — Gain settings of -18 dB, -3 dB, +25 dB, and +40 dB accommodate dynamic mics, phantom-powered mics, and common line levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e+48 V Phantom Power Per Channel\u003c\/strong\u003e — Independent phantom power supports condenser microphones on each input channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Output Gain\u003c\/strong\u003e — Analog output gain is software adjustable from 0 dB to -60 dB plus mute to match any line input equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante Domain Manager Ready\u003c\/strong\u003e — Full Dante Domain Manager support simplifies enterprise network management and AV system integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room and commercial meeting space input plates\u003c\/li\u003e\n\u003cli\u003eHotel ballrooms and convention centers\u003c\/li\u003e\n\u003cli\u003eTraining rooms and education spaces\u003c\/li\u003e\n\u003cli\u003eFitness facilities and multi-purpose rooms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Inputs\u003c\/td\u003e\n\u003ctd\u003e2 x 3-pin XLR (balanced, RF filtered); 2 x balanced line on depluggable connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Gain\u003c\/td\u003e\n\u003ctd\u003e-18 dB, -3 dB, +25 dB, +40 dB, software selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;1.8 kΩ at any gain setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Levels (1 \u0026amp; 2)\u003c\/td\u003e\n\u003ctd\u003e+20 dBu @ 0 dB w\/ -15 dB pad; +5 dBu @ 0 dB; -22 dBu @ +25 dB; -38 dBu @ +40 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Levels (3 \u0026amp; 4)\u003c\/td\u003e\n\u003ctd\u003e+20 dBu (+4 dBu mode); +12 dBu (-10 dBV mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhantom Power\u003c\/td\u003e\n\u003ctd\u003e+48 V, software selectable per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEIN\u003c\/td\u003e\n\u003ctd\u003e-115 dBu (+40 dB gain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; -85 dBu @ 0 dB gain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Outputs\u003c\/td\u003e\n\u003ctd\u003eBalanced line level with automatic muting on loss of Dante signal; +20 dBu max output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork\u003c\/td\u003e\n\u003ctd\u003eStandard Ethernet, single RJ-45, CAT-5e or better, 100 Mbps; 44.1\/48 kHz; min latency 1 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e802.3af PoE, \u0026lt; 5 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (HWD)\u003c\/td\u003e\n\u003ctd\u003e4.2 x 3.5 x 2 in (114.3 x 88.9 x 50.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.6 lb (0.27 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 to 40° C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the unDX2IO+ work with Q-SYS?\u003c\/strong\u003e Yes. It connects to a Q-SYS system as well as any standard Dante or AES67 network over Ethernet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e The plate is 802.3af PoE compliant, drawing under 5 W, so a single CAT-5e or better cable provides power, control, and data with no local power supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat junction box does it fit?\u003c\/strong\u003e The unDX2IO+ is designed to fit all dual-gang US junction boxes, mud rings, and old-work brackets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it support both microphones and consumer line sources?\u003c\/strong\u003e Yes. Four software-selectable gains and per-channel +48 V phantom power handle dynamic and condenser microphones, while the additional balanced line inputs accept consumer and professional line sources.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat about warranty and support?\u003c\/strong\u003e The unDX2IO+ is covered under QSC warranty terms; contact Creation Networks support for help with specification and AV integration.\u003c\/p\u003e","brand":"QSC","offers":[{"title":"Default Title","offer_id":42449607753964,"sku":"unDX2IO+","price":1145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/qsc-attero-tech-undx2io-danteaes67-network-audio-wallplate-2-in-xlr-x-2-in-phoenix-x-2-out-xlr-creation-networks-63587.jpg?v=1757890076"},{"product_id":"attero-tech-undx4i-dante-network-audio-wall-plate-4x2-mic-line-i-o","title":"QSC Attero Tech unDX4I – Dante\/AES67 4x2 Mic\/Line Network Audio Wall Plate","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Attero Tech unDX4I by QSC is a Dante network audio wall plate that delivers four balanced XLR mic\/line inputs and two balanced line outputs at the point of use. As a high-density Dante\/AES67 wall plate, it captures microphones, instruments, and line sources at lecterns, presentation positions, and AV room panels, then transports them over a single PoE cable, removing long analog runs back to the AV rack. It integrates into Q-SYS as a drag-and-drop extension or connects to any standard Dante network, making it a versatile networked mic\/line input wall plate for commercial AV deployment.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/qsc-dante-network-audio-wall-plate-4x2-micline-io-attero-tech-undx4i-creation-networks-81754.jpg?v=1757890077\" alt=\"QSC Attero Tech unDX4I – Dante\/AES67 4x2 Mic\/Line Network Audio Wall Plate - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe unDX4I is a cost-effective multi-I\/O Dante network audio wall plate featuring four balanced mic\/line XLR inputs and two balanced line outputs on Phoenix depluggable connectors. All inputs and outputs operate simultaneously and every audio channel is addressed separately on the network. The plate fits most dual-gang US junction boxes and is PoE enabled, so a single CAT-5 cable carries power and data. Three software-selectable input gains plus +48 V phantom power per channel accommodate dynamic microphones, condenser microphones, and common line levels. The balanced line outputs can be wired to a passive XLR plate so that four XLR inputs and two XLR outputs are available in a 3-gang US wall space. An ID LED simplifies identifying the unit during unIFY software configuration, which streamlines AV system integration on larger networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour XLR Mic\/Line Inputs\u003c\/strong\u003e — Four balanced, RF-filtered XLR inputs capture microphones and line-level sources directly at the wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Balanced Line Outputs\u003c\/strong\u003e — Two Phoenix depluggable outputs with automatic muting on loss of Dante signal provide local monitoring or zone feeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante and AES67 Networking\u003c\/strong\u003e — Audio transports over standard Ethernet on a single RJ-45 and integrates with Q-SYS or any Dante network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Powered\u003c\/strong\u003e — 802.3af PoE delivers power and data over one CAT-5 cable, drawing under 5 W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer-Channel Phantom Power\u003c\/strong\u003e — Software-selectable +48 V on each input supports condenser microphones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Software-Selectable Gains\u003c\/strong\u003e — Gain settings of -18 dB, -3 dB, +25 dB, and +40 dB are adjustable per input to match diverse sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eID LED and Dante Domain Manager Ready\u003c\/strong\u003e — An identification LED and full Dante Domain Manager support ease configuration and enterprise network management.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room and commercial meeting space mic input panels\u003c\/li\u003e\n\u003cli\u003eHouse of worship lectern and presentation inputs\u003c\/li\u003e\n\u003cli\u003eHotel ballrooms and convention centers\u003c\/li\u003e\n\u003cli\u003eTraining rooms and education spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Inputs\u003c\/td\u003e\n\u003ctd\u003e4 x XLR (balanced, RF filtered)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Gain\u003c\/td\u003e\n\u003ctd\u003e-18 dB, -3 dB, +25 dB, +40 dB, software selectable per input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;1.8 kΩ at any gain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Levels\u003c\/td\u003e\n\u003ctd\u003e+20 dBu @ -18 dB; +6 dBu @ -3 dB; -23 dBu @ +25 dB; -38 dBu @ +40 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhantom Power\u003c\/td\u003e\n\u003ctd\u003e+48 V, software selectable per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEIN\u003c\/td\u003e\n\u003ctd\u003e-115 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.02% @ 1 kHz (all gain settings)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e20 Hz–20 kHz ±1 dB (-18\/-3 dB gain); 50 Hz–20 kHz ±1 dB (+25\/+40 dB gain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Outputs\u003c\/td\u003e\n\u003ctd\u003e2 x balanced line on 3-pin Phoenix, auto-mute on Dante signal loss; 200 Ω balanced; +20 dBu max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Attenuation\u003c\/td\u003e\n\u003ctd\u003e0 to -60 dB, 1 dB increments, software controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork\u003c\/td\u003e\n\u003ctd\u003eStandard Ethernet, single RJ-45, CAT-5e or better, 100 Mbps; 44.1\/48 kHz; min latency 1 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e802.3af PoE, \u0026lt; 5 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (HWD)\u003c\/td\u003e\n\u003ctd\u003e4.2 x 3.5 x 2 in (114.3 x 88.9 x 50.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.6 lb (0.27 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 to 40° C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs the unDX4I compatible with Q-SYS?\u003c\/strong\u003e Yes. It integrates into a Q-SYS design as an Attero Tech extension and also operates on any standard Dante or AES67 network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e The plate is 802.3af PoE compliant, drawing under 5 W, so a single CAT-5 cable provides both power and data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat junction box does it require?\u003c\/strong\u003e The unDX4I fits most dual-gang US junction boxes; its line outputs can also be extended to a passive XLR plate within a 3-gang space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it support condenser microphones?\u003c\/strong\u003e Yes. Each input provides software-selectable +48 V phantom power and three gain settings for dynamic and condenser microphones plus line sources.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat about warranty and support?\u003c\/strong\u003e The unDX4I is covered under QSC warranty terms; contact Creation Networks support for specification and AV integration assistance.\u003c\/p\u003e","brand":"QSC","offers":[{"title":"Default Title","offer_id":42449608081644,"sku":"unDX4I","price":1230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/qsc-dante-network-audio-wall-plate-4x2-micline-io-attero-tech-undx4i-creation-networks-81754.jpg?v=1757890077"},{"product_id":"copy-of-attero-tech-und6io-dante™-networked-audio-wall-plate-dante-aes67-wall-plate-4-x-2-multi-io","title":"QSC Attero Tech C1 – Axon Single-Gang Networked Audio Zone Controller","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Attero Tech Axon C1 by QSC is a single-gang networked audio zone controller that gives commercial spaces a simple, wall-mounted way to control volume, mute, and presets without a full touch panel. As an Ethernet-based wall controller for the Q-SYS ecosystem, it pairs a high-contrast OLED display with a rotary encoder and an RGB LED bar for clear local control in conference rooms, hospitality AV, and retail environments. The C1 integrates into Q-SYS through a control plugin that requires no custom programming, and it can also control third-party AV equipment over UDP or TCP\/IP.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/qsc-single-gang-networked-audio-controller-attero-tech-c1-creation-networks-59350.jpg?v=1757890079\" alt=\"QSC Attero Tech C1 – Axon Single-Gang Networked Audio Zone Controller - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe Axon C1 is an assignable control solution for networked AV systems built around a small-format, single-gang Decora in-wall design. A 1.5-inch diagonal OLED display and a rotary\/pushbutton encoder give end users straightforward control over assigned AV system functions, while a second pushbutton toggles menus and an adjustable-brightness RGB LED bar provides optional feedback for zone level and system state. The controller is PoE powered, so a single CAT-5e\/CAT-6 cable handles both power and communication for a clean, unobtrusive installation. Menus are customized with the unIFY Control Panel and mapped through the Q-SYS Designer plugin, which removes the need for custom programming during AV system integration. Because the C1 is Ethernet-based, it can control virtually any third-party audio DSP or AV equipment supporting UDP or TCP\/IP, making it well suited to commercial deployment across multiple venue types. Black and white Decora faceplates are included to match a range of interiors.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOLED Display and Rotary Encoder\u003c\/strong\u003e — A 1.5-inch high-contrast OLED display with a rotary\/pushbutton encoder gives users clear, simple control of volume, mute, and preset recall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-Programming Q-SYS Integration\u003c\/strong\u003e — A Q-SYS control plugin maps functions without custom code, speeding AV system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThird-Party Control\u003c\/strong\u003e — Ethernet-based control supports virtually any UDP or TCP\/IP audio DSP or AV device, not just Q-SYS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Powered\u003c\/strong\u003e — 802.3af Class 0 PoE delivers power and control over one CAT-5e\/CAT-6 cable, drawing under 2 W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssignable RGB LED Bar\u003c\/strong\u003e — An adjustable-brightness LED bar provides optional visual feedback for zone level and system state.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Gang Decora Design\u003c\/strong\u003e — The in-wall, single-gang form factor with included black and white faceplates installs unobtrusively in standard electrical boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Menus\u003c\/strong\u003e — Menu content is tailored per venue with the unIFY Control Panel for a focused end-user experience.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room and commercial meeting space zone control\u003c\/li\u003e\n\u003cli\u003eHospitality AV in hotel meeting and event centers\u003c\/li\u003e\n\u003cli\u003eRetail and multi-purpose room volume and source control\u003c\/li\u003e\n\u003cli\u003eEducation and corporate AV spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUser Interface\u003c\/td\u003e\n\u003ctd\u003eOne rotary\/pushbutton encoder knob; one pushbutton toggle selector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e1.5 in (38.1 mm) diagonal high-contrast OLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus Indicator\u003c\/td\u003e\n\u003ctd\u003eRGB LED bar, adjustable brightness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork\u003c\/td\u003e\n\u003ctd\u003eEthernet, RJ-45, 100 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e802.3af Class 0 PoE, \u0026lt; 2 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (WHD)\u003c\/td\u003e\n\u003ctd\u003e1.74 x 4.2 x 1.77 in (44.19 x 106.68 x 44.96 mm); in-wall depth 1.19 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25 lb (0.113 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eFCC Part 15 Subpart B Class A, CE, WEEE, RoHS, REACH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0° C to 40° C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the Axon C1 require programming to work with Q-SYS?\u003c\/strong\u003e No. It integrates into Q-SYS through a control plugin and is mapped with the Q-SYS Designer plugin, removing the need for custom programming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it control non-Q-SYS equipment?\u003c\/strong\u003e Yes. The C1 is an Ethernet-based controller that can operate virtually any third-party audio DSP or AV device supporting UDP or TCP\/IP control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e The controller is 802.3af Class 0 PoE powered, drawing under 2 W, so a single CAT-5e\/CAT-6 cable supplies both power and communication.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it install into?\u003c\/strong\u003e The C1 uses a single-gang Decora in-wall design and fits standard US single-gang electrical boxes, with black and white faceplates included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat about warranty and support?\u003c\/strong\u003e The Axon C1 is covered under QSC warranty terms; contact Creation Networks support for help with control system design and AV integration.\u003c\/p\u003e","brand":"QSC","offers":[{"title":"Default Title","offer_id":42449611522284,"sku":"C1","price":824.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/qsc-single-gang-networked-audio-controller-attero-tech-c1-creation-networks-59350.jpg?v=1757890079"},{"product_id":"hd-md-4k-300-2g-b-kit-4k-3x1-scaling-auto-switcher-and-dm-lite-wall-plate-extender","title":"Crestron HD-MD-4K-300-2G-B KIT  4K 3x1 Scaling Auto-Switcher and DM Lite Wall Plate Extender","description":"\u003ch2\u003eCrestron HD-MD-4K-300-2G-B KIT – DM Lite 4K60 2-Gang Presentation System Kit, Black\u003c\/h2\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-hd-md-4k-300-2g-b-kit-dm-lite-4k60-presentation-system-kit-black-creation-networks.jpg\" alt=\"Crestron HD-MD-4K-300-2G-B KIT DM Lite 4K60 2-gang presentation system kit black conference room\" style=\"max-width:480px;height:auto;display:block;margin-bottom:20px;\"\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Crestron HD-MD-4K-300-2G-B KIT is a complete DM Lite 4K60 presentation system kit in a two-gang black wall plate configuration, bundling the transmitter wall plate and compatible receiver as a matched pair for a complete single-source DM Lite signal extension solution. Designed for conference rooms and meeting spaces where a complete transmitter-receiver pair is specified as a single line item for simplified procurement and installation — the kit includes all components required for a complete DM Lite presenter connection wall plate and display-side receiver deployment.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eProcurement of DM Lite presenter connection systems as complete kits — rather than separate transmitter and receiver line items — simplifies the specification, ordering, and installation process for conference room AV signal extension deployments. The HD-MD-4K-300-2G-B KIT provides a matched two-gang black presenter wall plate transmitter and a compatible DM Lite receiver in a single SKU, ensuring transmitter\/receiver compatibility without the need to separately verify individual transmitter and receiver pairing. The two-gang black wall plate format accommodates the HDMI presenter connection alongside any additional connection ports included in the transmitter wall plate configuration — refer to the Crestron data sheet for the specific input ports included in the HD-MD-4K-300-2G-B transmitter wall plate.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete DM Lite Kit:\u003c\/strong\u003e Matched transmitter wall plate and receiver as a single procurement SKU — eliminates separate transmitter\/receiver ordering and compatibility verification for the DM Lite presenter connection system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K60 Signal Extension:\u003c\/strong\u003e 4K60 HDMI extension over Cat5e or Cat6 from the presenter wall plate to the AV rack or display position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Gang Black Wall Plate:\u003c\/strong\u003e Dual-gang form factor for the transmitter wall plate; black finish for standard commercial conference room wall plate aesthetics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232, USB, and IR Pass-Through:\u003c\/strong\u003e Control and USB signals carried over the same CATx cable alongside video.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eHD-MD-4K-300-2G-B KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eKit Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eDM Lite transmitter wall plate + compatible receiver — refer to Crestron data sheet for specific components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eWall Plate Format\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eTwo-gang, black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eMaximum Resolution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e4K60 — refer to Crestron data sheet for color depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eCat5e or Cat6 UTP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:9px 12px;border:1px solid #ddd;\"\u003eHD-MD-4K-300-2G-B KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eCompetitor comparison: not applicable for this product.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat input ports are on the transmitter wall plate?\u003c\/strong\u003e\u003cbr\u003e\nRefer to the Crestron HD-MD-4K-300-2G-B KIT data sheet for specific input connector types on the transmitter wall plate. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e for port configuration and compatibility guidance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003e\nCrestron provides a standard 3-year limited warranty. Contact \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003eCreation Networks\u003c\/a\u003e for warranty details.\u003c\/p\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":42578984337644,"sku":"HD-MD-4K-300-2G-B","price":2200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-hd-md-4k-300-2g-b-kit-4k-3x1-scaling-auto-switcher-and-dm-lite-wall-plate-extender-creation-networks-14552.png?v=1757890780"},{"product_id":"crestron-dm-nux-l2-1g-b-dm-nux-usb-over-network-wall-plate-with-routing-local-black","title":"Crestron DM-NUX-L2-1G-B  DM NUX USB over Network Wall Plate with Routing, Local, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Crestron DM-NUX-L2-1G-B is the local, host-side module of the DM NUX USB over Network family, in a single-gang black wall plate. It extends and routes USB 1.0, 1.1, and 2.0 signals between a host computer and remote devices over Ethernet or CAT5e cable for distances up to 330 ft (100 m). A USB Type B port connects to the host, while pairing with a DM-NUX-R2 remote endpoint completes a working link. Integration with a Crestron control system or DigitalMedia system enables managed USB signal routing.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe DM-NUX-L2-1G-B provides connectivity for a single USB host such as a computer, media server, codec, or game console. It connects to a Crestron DM-NUX-R2 remote endpoint, either directly over a dedicated CAT5e or higher cable or across a Layer 2 Ethernet network, transporting USB at speeds up to 480 Mbps depending on network conditions. Using Virtual Hub technology, up to five DM-NUX-R2 endpoints can connect to a single DM-NUX-L2, allowing numerous USB devices to control one host. The endpoint requires no drivers with Windows, macOS, or Linux and is plug-and-play compatible with most USB 1.1 and 2.0 devices. Mass storage acceleration improves USB 2.0 bulk transfer speeds. When integrated with a DigitalMedia system, USB routing follows video and audio routing, and the endpoint can connect to the LAN port of a DM transmitter or receiver to add USB connectivity without extra wiring. The DM-NUX-L2 is USB powered through the host interface. To form a complete system, pair it with a Crestron \u003ca href=\"https:\/\/creationnetworks.net\/products\/crestron-dm-nux-r2-1g-b-dm-nux-usb-over-network-wall-plate-with-routing-remote-black\"\u003eDM-NUX-R2-1G-B remote module\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Signal Extension\u003c\/strong\u003e — Extends USB 1.0, 1.1, and 2.0 signals up to 330 ft (100 m) over Ethernet or CAT5e cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHost-Side Module\u003c\/strong\u003e — Connects to a single USB host via a USB Type B port (cable included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManaged Routing\u003c\/strong\u003e — Enables USB signal routing under a Crestron control system or DigitalMedia system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVirtual Hub\u003c\/strong\u003e — Supports up to five DM-NUX-R2 remote endpoints connected to one local module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Throughput\u003c\/strong\u003e — Transports USB at up to 480 Mbps with mass storage acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriverless Operation\u003c\/strong\u003e — Requires no drivers with Windows, macOS, or Linux for most devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Gang Wall Plate\u003c\/strong\u003e — Installs in a standard single-gang opening with a black finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Powered\u003c\/strong\u003e — Drawn from the connected USB host interface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference Rooms\u003c\/strong\u003e — Connects a room PC or codec to remotely located USB peripherals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassrooms\u003c\/strong\u003e — Extends an instructor host to a wall plate serving keyboards, cameras, or whiteboards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Rooms\u003c\/strong\u003e — Routes a host to multiple device endpoints across a building.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigitalMedia Systems\u003c\/strong\u003e — Adds USB host connectivity alongside extended video and audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDM-NUX-L2-1G-B (Local, Black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRole\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLocal (host-side) USB endpoint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eUSB Support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUSB 1.0\/1.1 and 2.0, hub compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eThroughput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUSB 2.0 up to 480 Mbps; USB 1.1 up to 12 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEthernet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100Base-T or 1000Base-T, Layer 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHost Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e(1) USB Type B (USB B-to-A cable included); (1) RJ-45 Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMax Distance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e330 ft (100 m) aggregate between endpoints; 6 ft (1.8 m) min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eVirtual Hub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to 5 DM-NUX-R2 endpoints per DM-NUX-L2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUSB powered via host interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOS Support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWindows, macOS, Linux (driverless for most devices)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCrestron 3-year limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the DM-NUX-L2-1G-B connect to?\u003c\/strong\u003e\u003cbr\u003eIt is the local (host-side) module and connects to a single USB host such as a PC, media server, or codec. It pairs with a DM-NUX-R2 remote module to form a working link.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a remote module included?\u003c\/strong\u003e\u003cbr\u003eNo. The local and remote endpoints are sold individually. A complete system requires at least one DM-NUX-L2 and one DM-NUX-R2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cabling is required?\u003c\/strong\u003e\u003cbr\u003eUse high-quality solid-core CAT5e or better cable, up to 330 ft (100 m) aggregate between endpoints, with a 6 ft (1.8 m) minimum. Endpoints can also connect across a Layer 2 Ethernet network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require drivers?\u003c\/strong\u003e\u003cbr\u003eNo. It is plug-and-play with Windows, macOS, and Linux for most USB 1.1 and 2.0 devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eThis product carries the Crestron 3-year limited warranty. For configuration and purchasing assistance, Contact Creation Networks.\u003c\/p\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":42593821163756,"sku":"DM-NUX-L2-1G-B","price":1040.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-dm-nux-l2-1g-b-dm-nux-usb-over-network-wall-plate-with-routing-local-black-creation-networks-91224.png?v=1757890906"},{"product_id":"crestron-dm-nux-r2-1g-b-dm-nux-usb-over-network-wall-plate-with-routing-remote-black","title":"Crestron DM-NUX-R2-1G-B  DM NUX USB over Network Wall Plate with Routing, Remote, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Crestron DM-NUX-R2-1G-B is the remote, device-side module of the DM NUX USB over Network family, in a single-gang black wall plate. It provides four USB Type A ports for connecting keyboards, mice, cameras, whiteboards, and other peripherals at a remote location. The module extends and routes USB 1.0, 1.1, and 2.0 signals over Ethernet or CAT5e cable for distances up to 330 ft (100 m). Paired with a DM-NUX-L2 local endpoint, it forms a managed USB extension and routing link.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe DM-NUX-R2-1G-B provides connectivity for up to four USB devices at one location, expandable using up to four USB hubs (not included) for as many as 30 USB devices. It connects to a Crestron DM-NUX-L2 local endpoint, either directly over a dedicated CAT5e or higher cable or across a Layer 2 Ethernet network, transporting USB at speeds up to 480 Mbps depending on network conditions. Using Virtual Hub technology, up to five DM-NUX-R2 endpoints can connect to a single DM-NUX-L2, enabling numerous devices to control one host. The endpoint requires no drivers with Windows, macOS, or Linux and is plug-and-play compatible with most USB 1.1 and 2.0 devices, including isochronous devices. When integrated with a DigitalMedia system, USB routing follows video and audio routing, allowing switching between hosts under control system management. Each USB port provides up to 600 mA concurrently, or up to 1 A when two or fewer ports are in use. The DM-NUX-R2 is powered by an included PW-2407WU power pack. To form a complete system, pair it with a Crestron \u003ca href=\"https:\/\/creationnetworks.net\/products\/crestron-dm-nux-l2-1g-b-dm-nux-usb-over-network-wall-plate-with-routing-local-black\"\u003eDM-NUX-L2-1G-B local module\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour USB Type A Ports\u003c\/strong\u003e — Connects up to four USB devices at the remote location, expandable with hubs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDevice-Side Module\u003c\/strong\u003e — Serves keyboards, mice, cameras, whiteboards, and other peripherals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Signal Extension\u003c\/strong\u003e — Extends USB 1.0, 1.1, and 2.0 signals up to 330 ft (100 m) over Ethernet or CAT5e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManaged Routing\u003c\/strong\u003e — Enables USB signal routing under a Crestron control system or DigitalMedia system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVirtual Hub\u003c\/strong\u003e — Supports up to five remote endpoints connected to one local module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Throughput\u003c\/strong\u003e — Transports USB at up to 480 Mbps with mass storage acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer-Port Power\u003c\/strong\u003e — Provides up to 600 mA per port concurrently, or up to 1 A with two or fewer ports active.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Gang Wall Plate\u003c\/strong\u003e — Installs in a standard single-gang opening with a black finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference Rooms\u003c\/strong\u003e — Provides USB ports at the table or display for cameras and peripherals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassrooms\u003c\/strong\u003e — Serves interactive whiteboards, keyboards, and document cameras remotely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Rooms\u003c\/strong\u003e — Connects multiple device endpoints to a centrally located host.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigitalMedia Systems\u003c\/strong\u003e — Adds remote USB device connectivity alongside extended video and audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDM-NUX-R2-1G-B (Remote, Black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRole\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRemote (device-side) USB endpoint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eUSB Ports\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e(4) USB Type A; up to 30 devices via 4 hubs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eUSB Support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUSB 1.0\/1.1 and 2.0, hub compatible (incl. isochronous)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eThroughput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUSB 2.0 up to 480 Mbps; USB 1.1 up to 12 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEthernet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100Base-T or 1000Base-T, Layer 2; (1) RJ-45 Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMax Distance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e330 ft (100 m) aggregate between endpoints; 6 ft (1.8 m) min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePort Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to 600 mA per port; up to 1 A with two or fewer ports active\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIncluded PW-2407WU power pack (24VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOS Support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWindows, macOS, Linux (driverless for most devices)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCrestron 3-year limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the DM-NUX-R2-1G-B connect to?\u003c\/strong\u003e\u003cbr\u003eIt is the remote (device-side) module and provides four USB Type A ports for peripherals. It pairs with a DM-NUX-L2 local module connected to the USB host.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a local module included?\u003c\/strong\u003e\u003cbr\u003eNo. The local and remote endpoints are sold individually. A complete system requires at least one DM-NUX-L2 and one DM-NUX-R2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many devices can it support?\u003c\/strong\u003e\u003cbr\u003eIt provides four USB Type A ports and is expandable to as many as 30 USB devices using up to four USB hubs (not included).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e\u003cbr\u003eThe remote module is powered by an included PW-2407WU power pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eThis product carries the Crestron 3-year limited warranty. For configuration and purchasing assistance, Contact Creation Networks.\u003c\/p\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":42593823883500,"sku":"DM-NUX-R2-1G-B","price":1040.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-dm-nux-r2-1g-b-dm-nux-usb-over-network-wall-plate-with-routing-remote-black-creation-networks-60449.png?v=1757890907"},{"product_id":"crestron-dm-nux-r2-1g-w-dm-nux-usb-over-network-wall-plate-with-routing-remote-white","title":"Crestron DM-NUX-R2-1G-W  DM NUX USB over Network Wall Plate with Routing, Remote, White","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Crestron DM-NUX-R2-1G-W is the remote, device-side module of the DM NUX USB over Network family, in a single-gang white wall plate. It provides four USB Type A ports for connecting keyboards, mice, cameras, whiteboards, and other peripherals at a remote location. The module extends and routes USB 1.0, 1.1, and 2.0 signals over Ethernet or CAT5e cable for distances up to 330 ft (100 m). Paired with a DM-NUX-L2 local endpoint, it forms a managed USB extension and routing link.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe DM-NUX-R2-1G-W provides connectivity for up to four USB devices at one location, expandable using up to four USB hubs (not included) for as many as 30 USB devices. It connects to a Crestron DM-NUX-L2 local endpoint, either directly over a dedicated CAT5e or higher cable or across a Layer 2 Ethernet network, transporting USB at speeds up to 480 Mbps depending on network conditions. Using Virtual Hub technology, up to five DM-NUX-R2 endpoints can connect to a single DM-NUX-L2, enabling numerous devices to control one host. The endpoint requires no drivers with Windows, macOS, or Linux and is plug-and-play compatible with most USB 1.1 and 2.0 devices, including isochronous devices. When integrated with a DigitalMedia system, USB routing follows video and audio routing, allowing switching between hosts under control system management. Each USB port provides up to 600 mA concurrently, or up to 1 A when two or fewer ports are in use. The DM-NUX-R2 is powered by an included PW-2407WU power pack. To form a complete system, pair it with a Crestron \u003ca href=\"https:\/\/creationnetworks.net\/products\/crestron-dm-nux-l2-1g-w-dm-nux-usb-over-network-wall-plate-with-routing-local-white\"\u003eDM-NUX-L2-1G-W local module\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour USB Type A Ports\u003c\/strong\u003e — Connects up to four USB devices at the remote location, expandable with hubs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDevice-Side Module\u003c\/strong\u003e — Serves keyboards, mice, cameras, whiteboards, and other peripherals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Signal Extension\u003c\/strong\u003e — Extends USB 1.0, 1.1, and 2.0 signals up to 330 ft (100 m) over Ethernet or CAT5e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManaged Routing\u003c\/strong\u003e — Enables USB signal routing under a Crestron control system or DigitalMedia system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVirtual Hub\u003c\/strong\u003e — Supports up to five remote endpoints connected to one local module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Throughput\u003c\/strong\u003e — Transports USB at up to 480 Mbps with mass storage acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer-Port Power\u003c\/strong\u003e — Provides up to 600 mA per port concurrently, or up to 1 A with two or fewer ports active.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Gang Wall Plate\u003c\/strong\u003e — Installs in a standard single-gang opening with a white finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference Rooms\u003c\/strong\u003e — Provides USB ports at the table or display for cameras and peripherals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassrooms\u003c\/strong\u003e — Serves interactive whiteboards, keyboards, and document cameras remotely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Rooms\u003c\/strong\u003e — Connects multiple device endpoints to a centrally located host.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigitalMedia Systems\u003c\/strong\u003e — Adds remote USB device connectivity alongside extended video and audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDM-NUX-R2-1G-W (Remote, White)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRole\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRemote (device-side) USB endpoint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eUSB Ports\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e(4) USB Type A; up to 30 devices via 4 hubs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eUSB Support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUSB 1.0\/1.1 and 2.0, hub compatible (incl. isochronous)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eThroughput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUSB 2.0 up to 480 Mbps; USB 1.1 up to 12 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEthernet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100Base-T or 1000Base-T, Layer 2; (1) RJ-45 Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMax Distance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e330 ft (100 m) aggregate between endpoints; 6 ft (1.8 m) min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePort Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to 600 mA per port; up to 1 A with two or fewer ports active\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIncluded PW-2407WU power pack (24VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOS Support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWindows, macOS, Linux (driverless for most devices)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCrestron 3-year limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the DM-NUX-R2-1G-W connect to?\u003c\/strong\u003e\u003cbr\u003eIt is the remote (device-side) module and provides four USB Type A ports for peripherals. It pairs with a DM-NUX-L2 local module connected to the USB host.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a local module included?\u003c\/strong\u003e\u003cbr\u003eNo. The local and remote endpoints are sold individually. A complete system requires at least one DM-NUX-L2 and one DM-NUX-R2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many devices can it support?\u003c\/strong\u003e\u003cbr\u003eIt provides four USB Type A ports and is expandable to as many as 30 USB devices using up to four USB hubs (not included).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e\u003cbr\u003eThe remote module is powered by an included PW-2407WU power pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eThis product carries the Crestron 3-year limited warranty. For configuration and purchasing assistance, Contact Creation Networks.\u003c\/p\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":42593825030380,"sku":"DM-NUX-R2-1G-W","price":1040.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-dm-nux-r2-1g-w-dm-nux-usb-over-network-wall-plate-with-routing-remote-white-creation-networks-67754.png?v=1757890908"},{"product_id":"crestron-dm-nux-l2-1g-w-dm-nux-usb-over-network-wall-plate-with-routing-local-white","title":"Crestron DM-NUX-L2-1G-W  DM NUX USB over Network Wall Plate with Routing, Local, White","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Crestron DM-NUX-L2-1G-W is the local, host-side module of the DM NUX USB over Network family, in a single-gang white wall plate. It extends and routes USB 1.0, 1.1, and 2.0 signals between a host computer and remote devices over Ethernet or CAT5e cable for distances up to 330 ft (100 m). A USB Type B port connects to the host, while pairing with a DM-NUX-R2 remote endpoint completes a working link. Integration with a Crestron control system or DigitalMedia system enables managed USB signal routing.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe DM-NUX-L2-1G-W provides connectivity for a single USB host such as a computer, media server, codec, or game console. It connects to a Crestron DM-NUX-R2 remote endpoint, either directly over a dedicated CAT5e or higher cable or across a Layer 2 Ethernet network, transporting USB at speeds up to 480 Mbps depending on network conditions. Using Virtual Hub technology, up to five DM-NUX-R2 endpoints can connect to a single DM-NUX-L2, allowing numerous USB devices to control one host. The endpoint requires no drivers with Windows, macOS, or Linux and is plug-and-play compatible with most USB 1.1 and 2.0 devices. Mass storage acceleration improves USB 2.0 bulk transfer speeds. When integrated with a DigitalMedia system, USB routing follows video and audio routing, and the endpoint can connect to the LAN port of a DM transmitter or receiver to add USB connectivity without extra wiring. The DM-NUX-L2 is USB powered through the host interface. To form a complete system, pair it with a Crestron \u003ca href=\"https:\/\/creationnetworks.net\/products\/crestron-dm-nux-r2-1g-w-dm-nux-usb-over-network-wall-plate-with-routing-remote-white\"\u003eDM-NUX-R2-1G-W remote module\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Signal Extension\u003c\/strong\u003e — Extends USB 1.0, 1.1, and 2.0 signals up to 330 ft (100 m) over Ethernet or CAT5e cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHost-Side Module\u003c\/strong\u003e — Connects to a single USB host via a USB Type B port (cable included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManaged Routing\u003c\/strong\u003e — Enables USB signal routing under a Crestron control system or DigitalMedia system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVirtual Hub\u003c\/strong\u003e — Supports up to five DM-NUX-R2 remote endpoints connected to one local module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Throughput\u003c\/strong\u003e — Transports USB at up to 480 Mbps with mass storage acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriverless Operation\u003c\/strong\u003e — Requires no drivers with Windows, macOS, or Linux for most devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Gang Wall Plate\u003c\/strong\u003e — Installs in a standard single-gang opening with a white finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Powered\u003c\/strong\u003e — Drawn from the connected USB host interface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference Rooms\u003c\/strong\u003e — Connects a room PC or codec to remotely located USB peripherals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassrooms\u003c\/strong\u003e — Extends an instructor host to a wall plate serving keyboards, cameras, or whiteboards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Rooms\u003c\/strong\u003e — Routes a host to multiple device endpoints across a building.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigitalMedia Systems\u003c\/strong\u003e — Adds USB host connectivity alongside extended video and audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDM-NUX-L2-1G-W (Local, White)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRole\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLocal (host-side) USB endpoint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eUSB Support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUSB 1.0\/1.1 and 2.0, hub compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eThroughput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUSB 2.0 up to 480 Mbps; USB 1.1 up to 12 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEthernet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100Base-T or 1000Base-T, Layer 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHost Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e(1) USB Type B (USB B-to-A cable included); (1) RJ-45 Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMax Distance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e330 ft (100 m) aggregate between endpoints; 6 ft (1.8 m) min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eVirtual Hub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to 5 DM-NUX-R2 endpoints per DM-NUX-L2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUSB powered via host interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOS Support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWindows, macOS, Linux (driverless for most devices)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCrestron 3-year limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the DM-NUX-L2-1G-W connect to?\u003c\/strong\u003e\u003cbr\u003eIt is the local (host-side) module and connects to a single USB host such as a PC, media server, or codec. It pairs with a DM-NUX-R2 remote module to form a working link.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a remote module included?\u003c\/strong\u003e\u003cbr\u003eNo. The local and remote endpoints are sold individually. A complete system requires at least one DM-NUX-L2 and one DM-NUX-R2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cabling is required?\u003c\/strong\u003e\u003cbr\u003eUse high-quality solid-core CAT5e or better cable, up to 330 ft (100 m) aggregate between endpoints, with a 6 ft (1.8 m) minimum. Endpoints can also connect across a Layer 2 Ethernet network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require drivers?\u003c\/strong\u003e\u003cbr\u003eNo. It is plug-and-play with Windows, macOS, and Linux for most USB 1.1 and 2.0 devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eThis product carries the Crestron 3-year limited warranty. For configuration and purchasing assistance, Contact Creation Networks.\u003c\/p\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":42593826767084,"sku":"DM-NUX-L2-1G-W","price":1040.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/crestron-dm-nux-l2-1g-w-dm-nux-usb-over-network-wall-plate-with-routing-local-white-creation-networks-56216.png?v=1757890909"},{"product_id":"av-pro-edge-ac-cxwp-hdmo-t-hdmi-wall-plate-transmitter-via-hdbaset","title":"AVPro Edge AC-CXWP-HDMO-T HDMI Wall Plate Transmitter via HDBaseT","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe AVPro Edge AC-CXWP-HDMO-T is a single-gang HDBaseT wall plate transmitter that accepts an HDMI source and extends it over a single CAT-6A cable to a compatible HDBaseT receiver. Part of the ConferX professional AV product line, it is designed for conference rooms, classrooms, and corporate meeting spaces where a clean, permanent HDMI connection point is required at the table or wall—without the need for local power or visible cable runs to the display.\u003c\/p\u003e\n\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-hdmo-t-hdmi-wall-plate-transmitter-via-hdbaset-creation-networks-30641.jpg?v=1757893599\" alt=\"AVPro Edge AC-CXWP-HDMO-T HDMI Wall Plate Transmitter via HDBaseT - Creation Networks\" style=\"max-width:100%;margin-bottom:16px;\"\u003e\n\u003cp\u003eThe AC-CXWP-HDMO-T installs into any standard single-gang Decora mud ring and connects via a straight-in rear RJ45 jack to the CAT-6A infrastructure run to the receiver location. HDMI auto-sensing means the wall plate activates the moment a source is connected—no configuration or user input needed. Paired with a compatible receiver such as the AC-EX70-444-RNE-P or AC-EX100-UHD-R, the unit delivers 1080p signals up to 100 meters (330 ft) and 4K signals up to 70 meters (230 ft). PoE power is sourced from the receiver, so no electrical outlet is required at the wall plate installation point.\u003c\/p\u003e\n\u003cp\u003eThe transmitter supports HDCP 2.2 and earlier, passes HDR 4:2:2 12-bit content, and handles the full range of uncompressed and lossless audio formats including Dolby TrueHD, DTS-HD Master Audio, and Atmos. ESD protection up to 7kV is integrated on all inputs and outputs. A 10-year warranty is standard for the ConferX product line.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHDMI 2.0 (a\/b) input with automatic signal sensing\u003c\/li\u003e\n  \u003cli\u003eHDBaseT output over single CAT-6A cable (no HDMI cable to the display)\u003c\/li\u003e\n  \u003cli\u003e1080p up to 100 meters (330 ft); 4K up to 70 meters (230 ft) with compatible receiver\u003c\/li\u003e\n  \u003cli\u003e4K 30Hz 4:4:4 and 4K 60Hz 4:2:0 HDMI resolution support\u003c\/li\u003e\n  \u003cli\u003eHDR 4:2:2 12-bit and HDCP 2.2 compliance\u003c\/li\u003e\n  \u003cli\u003ePoE-powered from receiver — no local power outlet at wall plate required\u003c\/li\u003e\n  \u003cli\u003eCEC passthrough for display power management\u003c\/li\u003e\n  \u003cli\u003eAudio: PCM 2ch\/5.1\/7.1, Dolby Digital, DTS, Dolby TrueHD, DTS-HD Master Audio, Atmos\u003c\/li\u003e\n  \u003cli\u003eESD protection up to 7kV on all inputs and outputs\u003c\/li\u003e\n  \u003cli\u003eSingle-gang Decora form factor — fits standard US electrical boxes and mud rings\u003c\/li\u003e\n  \u003cli\u003eStraight-in rear RJ45 for low-profile, clean wall installation\u003c\/li\u003e\n  \u003cli\u003eCascade-capable for extended distance runs\u003c\/li\u003e\n  \u003cli\u003e10-year AVPro Edge ConferX warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCorporate conference rooms requiring a permanent, clean HDMI input at the conference table or presentation wall\u003c\/li\u003e\n  \u003cli\u003eClassrooms and lecture halls where instructor laptops or media players connect to ceiling-mounted projectors via HDBaseT\u003c\/li\u003e\n  \u003cli\u003eHuddle rooms and collaboration spaces with a single display fed from a fixed HDMI connection point\u003c\/li\u003e\n  \u003cli\u003eHotel meeting rooms, ballrooms, and event spaces requiring distributed HDMI presentation points\u003c\/li\u003e\n  \u003cli\u003eHouse of worship auditoriums with front-of-stage HDMI input feeding production displays\u003c\/li\u003e\n  \u003cli\u003eControl rooms and broadcast environments connecting local HDMI sources to remote displays over structured cabling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead style=\"background-color:#f0f0f0;\"\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAC-CXWP-HDMO-T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (a\/b) — auto-sensing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over CAT-6A (single RJ45)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDMI Resolution\u003c\/td\u003e\n\u003ctd\u003e4K 30Hz 4:4:4; 4K 60Hz 4:2:0 8-bit; HDR 4:2:2 12-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTransmission Distance\u003c\/td\u003e\n\u003ctd\u003eUp to 100m (330 ft) at 1080p; up to 70m (230 ft) at 4K (CAT-6A)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.2 and earlier\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAudio\u003c\/td\u003e\n\u003ctd\u003ePCM 2ch, 5.1, 7.1; Dolby Digital; DTS; Dolby TrueHD; DTS-HD Master Audio; Atmos\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCEC\u003c\/td\u003e\n\u003ctd\u003ePassthrough supported\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePoE from receiver (no local supply required); optional local power\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eESD Protection\u003c\/td\u003e\n\u003ctd\u003e7kV (inputs and outputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eSingle-gang Decora; fits US single-gang boxes and mud rings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRear Connector\u003c\/td\u003e\n\u003ctd\u003eStraight-in RJ45 jack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCascade\u003c\/td\u003e\n\u003ctd\u003eSupported for ultra-long distance runs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWhat's in the Box\u003c\/td\u003e\n\u003ctd\u003eAC-CXWP-HDMO-T transmitter unit, 1x Decora wall plate cover (white), 2x long electrical outlet screws\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e10-year AVPro Edge ConferX warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead style=\"background-color:#f0f0f0;\"\u003e\n    \u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eAVPro Edge AC-CXWP-HDMO-T\u003c\/th\u003e\n\u003cth\u003eKramer WP-789TXR (HDMI only)\u003c\/th\u003e\n\u003cth\u003eExtron WP 400 (HDMI only)\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 only (dedicated HDMI-only model)\u003c\/td\u003e\n\u003ctd\u003eHDMI + VGA + USB-C (multi-input)\u003c\/td\u003e\n\u003ctd\u003eHDMI + VGA (multi-input)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTransmission\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over CAT-6A\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over CAT-5e\/6\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over CAT-5e\/6\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e4K Distance\u003c\/td\u003e\n\u003ctd\u003eUp to 70m at 4K\u003c\/td\u003e\n\u003ctd\u003eUp to 70m at 4K\u003c\/td\u003e\n\u003ctd\u003eUp to 60m at 4K (varies by model)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePoE from receiver — no local supply\u003c\/td\u003e\n\u003ctd\u003ePoE from receiver\u003c\/td\u003e\n\u003ctd\u003eRequires local power or PoE (model-dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eESD Protection\u003c\/td\u003e\n\u003ctd\u003e7kV\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e10 years\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBest For\u003c\/td\u003e\n\u003ctd\u003eClean HDMI-only rooms, no legacy VGA needed\u003c\/td\u003e\n\u003ctd\u003eMulti-format rooms, newer installations\u003c\/td\u003e\n\u003ctd\u003eMulti-format rooms, Extron-managed systems\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat is the difference between the AC-CXWP-HDMO-T and the AC-CXWP-VGA-T?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe AC-CXWP-HDMO-T is an HDMI-only wall plate transmitter, ideal for rooms where all sources use HDMI. The AC-CXWP-VGA-T adds a VGA input for environments where older VGA sources must also be accommodated. If your installation has no legacy VGA devices, the HDMO-T provides a cleaner, simpler connection point.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eDoes the AC-CXWP-HDMO-T require a local power outlet at the wall plate?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eNo. Power is delivered via PoE from the paired HDBaseT receiver. No electrical outlet is required at the transmitter location, which simplifies both new construction and retrofit installations.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat receiver should be paired with the AC-CXWP-HDMO-T for 4K?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eFor 4K HDBaseT operation, pair with the AVPro Edge AC-EX70-444-RNE-P or AC-EX100-UHD-R. These receivers provide the PoE power and HDBaseT signal processing required for full 4K performance at distance.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eCan the unit be cascaded for longer runs?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. The AC-CXWP-HDMO-T supports cascading with compatible HDBaseT extenders for installations requiring signal runs beyond standard HDBaseT distances.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat is the CAT cable requirement?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eCAT-6A is required for 4K at 70 meters (230 ft). At 1080p, runs up to 100 meters (330 ft) are supported on CAT-6A. CAT-5e is not recommended for 4K distance runs.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"AVPro Edge","offers":[{"title":"Default Title","offer_id":43111953957100,"sku":"AC-CXWP-HDMO-T","price":834.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-hdmo-t-hdmi-wall-plate-transmitter-via-hdbaset-creation-networks-30641.jpg?v=1757893599"},{"product_id":"qsc-axon-d2i-network-audio-interface-d2i","title":"QSC Attero Tech D2i – Dante 2-Input Network Audio Wall Plate","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe QSC Attero Tech Axon D2i is a single-gang Dante\/AES67 network audio input wall plate for network AV systems, including Q-SYS. It places two balanced mic\/line inputs at the wall in a cost-effective form factor, making it easy to bring microphones and analog sources from a room into a networked audio system. A Q-SYS Extension lets integrators add the D2i to Q-SYS installations without any programming, simplifying deployment in conference and meeting spaces.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/qsc-dantetmaes67-network-audio-interface-attero-tech-d2i-creation-networks-45186.jpg\" alt=\"QSC Attero Tech D2i – Dante 2-Input Network Audio Wall Plate - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe D2i provides two balanced inputs on combination connectors — a 3-pin XLR for microphone level and a 1\/4-inch TRS for line level — with selectable +48V phantom power for condenser microphones. An integrated Axiom port allows Attero Tech by Axiom wall plates to be added to network AV systems and includes RS-232 control pass-through. The plate is powered over Ethernet (PoE 802.3af) for single-cable installation, is Dante Domain Manager ready, and ships with both black and white Decora faceplates and fascia inserts so it blends into any room. For higher input counts and additional formats, compare other Attero Tech networked wall plates at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo balanced mic\/line inputs\u003c\/strong\u003e — 3-pin XLR (mic level) with combination 1\/4-inch TRS (line level).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e+48V phantom power\u003c\/strong\u003e — Supports condenser microphones at the wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Axiom port\u003c\/strong\u003e — Adds Attero Tech by Axiom wall plates to network AV, with RS-232 control pass-through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE powered (802.3af)\u003c\/strong\u003e — Single-cable network and power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Q-SYS Extension\u003c\/strong\u003e — Add to Q-SYS designs without programming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante Domain Manager ready\u003c\/strong\u003e — Supports secure, managed Dante networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack and white Decora faceplates included\u003c\/strong\u003e — Blends into any room finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eHuddle room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDante\/AES67 network audio input wall plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle-gang\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 balanced mic\/line (3-pin XLR mic + 1\/4-inch TRS line combo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhantom power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+48 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIntegrated Axiom port with RS-232 pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePoE (IEEE 802.3af)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetworking\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDante\/AES67; Dante Domain Manager ready\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack and white Decora faceplates and fascia inserts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat inputs does the D2i provide?\u003c\/strong\u003e Two balanced mic\/line inputs on combination connectors — 3-pin XLR for mic level and 1\/4-inch TRS for line level — with +48V phantom power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e Over Ethernet via PoE (IEEE 802.3af), so one cable carries both network audio and power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it integrate with Q-SYS?\u003c\/strong\u003e An available Q-SYS Extension lets integrators add the D2i to Q-SYS designs without programming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat about warranty and support?\u003c\/strong\u003e Coverage follows QSC's published warranty terms. Contact Creation Networks support for integration help.\u003c\/p\u003e","brand":"QSC","offers":[{"title":"Default Title","offer_id":43177791914220,"sku":"D2i","price":1230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/qsc-dantetmaes67-network-audio-interface-attero-tech-d2i-creation-networks-45186.jpg?v=1757894054"},{"product_id":"chief-xtm1-xsm1-fusion-wall-plate-fca115","title":"Chief Xtm1\/Xsm1 Fusion Wall Plate - FCA115","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Chief FCA115 is a FUSION wall plate for use with the XSM1U and XTM1U mounts when installing on 24\" studs and on displays with narrow mounting patterns. It is intended for large flat panel installations in conference rooms and commercial meeting spaces where stud spacing and display VESA patterns require a wider interface. The plate adapts the FUSION mount to these specific wall and display conditions.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/chief-xtm1xsm1-fusion-wall-plate-fca115-creation-networks-67447.jpg?v=1757894539\" alt=\"Chief Xtm1\/Xsm1 Fusion Wall Plate - FCA115 - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe FCA115 FUSION wall plate is used with the XSM1U and XTM1U FUSION mounts when an installation calls for 24\" stud spacing or involves displays with narrow mounting patterns. In those cases, the standard interface may not span the studs or align with the display, and this plate provides the needed mounting surface. It is part of Chief's FUSION large flat panel mounting platform, so it integrates with the existing mount hardware. The plate is best used with a range of large commercial displays, including models from Cybertouch (RMT7002, RMT7006, RMT7032), EYEVIS (LCD64004K, LCD7000HD), NEC (P701, P701AVT, P702, P702AVT), Sharp (PNL802B), Sony (GXDL65H1), and Toshiba (L65A5XP). By matching the mount to challenging stud and VESA conditions, it helps integrators complete large-display installations cleanly. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/chief\"\u003eChief collection\u003c\/a\u003e for FUSION mounts and interface accessories.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFUSION compatibility\u003c\/strong\u003e — Designed for use with the XSM1U and XTM1U FUSION mounts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24\" stud support\u003c\/strong\u003e — Supports installations on 24\" stud spacing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNarrow mounting patterns\u003c\/strong\u003e — Accommodates displays with narrow mounting patterns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge-display ready\u003c\/strong\u003e — Recommended for a range of large commercial flat panels from major manufacturers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"border-collapse:collapse;width:100%;min-width:480px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ccc;padding:8px;text-align:left;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ccc;padding:8px;text-align:left;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eFCA115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eType\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eFUSION wall plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eMount Compatibility\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eXSM1U, XTM1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eStud Spacing\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e24\" studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eDisplay Patterns\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eNarrow mounting patterns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Chief","offers":[{"title":"Default Title","offer_id":43197125034220,"sku":"FCA115","price":103.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/chief-xtm1xsm1-fusion-wall-plate-fca115-creation-networks-67447.jpg?v=1757894539"},{"product_id":"chief-wallplate-acc-black-ksa1001b","title":"Chief Wallplate Acc. Black - KSA1001B","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Chief KSA1001B wallplate accessory converts a compatible Chief desk mount into a wall mount, giving integrators flexibility when a workstation layout changes. It supports small displays with VESA 75 x 75 mm or 100 x 100 mm mounting patterns. This black model suits commercial workstations, huddle rooms, and other office AV applications.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/chief-wallplate-acc-black-ksa1001b-creation-networks-61792.jpg?v=1757895111\" alt=\"Chief Wallplate Acc. Black - KSA1001B - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe KSA1001B is a wallplate accessory that lets installers quickly change a compatible Chief desk mount into a wall mount. This is useful when a space is reconfigured and a display that once sat on a desk needs to move to the wall, avoiding the purchase of an entirely new mount. It is compatible with screens that use VESA 75 x 75 mm or 100 x 100 mm mounting patterns, covering many small commercial displays. The accessory is available in black for this model and in a silver finish as a companion option. As a straightforward conversion plate, it helps standardize hardware across desk and wall deployments in an office or commercial AV environment. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/chief\"\u003eChief collection\u003c\/a\u003e for compatible desk mounts and display accessories.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesk-to-wall conversion\u003c\/strong\u003e — Quickly changes a compatible Chief desk mount into a wall mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVESA compatibility\u003c\/strong\u003e — Supports screens with VESA 75 x 75 mm or 100 x 100 mm mounting patterns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack finish\u003c\/strong\u003e — Black finish for commercial workstations; a silver option is also available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReconfiguration flexibility\u003c\/strong\u003e — Helps repurpose existing mounts when a workspace layout changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"border-collapse:collapse;width:100%;min-width:480px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ccc;padding:8px;text-align:left;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ccc;padding:8px;text-align:left;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eKSA1001B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eType\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eDesk-to-wall conversion plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eVESA Patterns\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e75 x 75 mm or 100 x 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Chief","offers":[{"title":"Default Title","offer_id":43197149675756,"sku":"KSA1001B","price":96.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/chief-wallplate-acc-black-ksa1001b-creation-networks-61792.jpg?v=1757895111"},{"product_id":"av-pro-edge-ac-cxwp-hdmo-bkt-conferx-s-hdbaset-wall-plate-transmitter-receiver-basic-kit","title":"AVPro Edge AC-CXWP-HDMO-BKT ConferX’s HDBaseT Wall Plate Transmitter\/Receiver Basic Kit","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AVPro Edge AC-CXWP-HDMO-BKT is a complete HDBaseT extension kit from the ConferX product line, pairing a single-gang Decora-style wall plate transmitter with a matching HDMI receiver to extend 4K HDMI signals up to 40 meters (130 feet) and 1080p signals up to 70 meters (230 feet) over a single CAT6A cable. Designed specifically for conference rooms, huddle spaces, classrooms, and single-office environments, the kit eliminates the length and fragility limitations of passive HDMI cables without requiring a separate rack-mount extender at the source end. The wall plate transmitter requires no local power — it draws power from the included receiver unit — keeping the presenter's end of the installation clean and cable-light. This is a point-to-point HDMI extension solution sold and used exclusively as a matched kit.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe AC-CXWP-HDMO-BKT solves a fundamental problem in meeting room AV design: getting HDMI from a presenter's connection point on a wall or table surface to a display or projector located 40 to 70 meters away, without the fragility and distance limitations of long passive HDMI cables. The single-gang wall plate transmitter (AC-CXWP-HDMO-T) mounts in any standard USA single-gang mud ring or Decora-type electrical box, presenting a clean flush-mounted HDMI input at the presenter's position. A single CAT6A cable run from the wall plate to the receiver (AC-EX70-UHD-BR) — which sits at the display end — carries the HDMI signal over HDBaseT at up to 40 meters for 4K30 4:4:4 or up to 70 meters for 1080p content. Audio is passed without modification, supporting uncompressed PCM 2CH, 5.1, and 7.1, as well as Dolby Digital, DTS, Dolby TrueHD, DTS-HD Master Audio, and Atmos over HDMI. HDCP 2.2 and all earlier versions are supported for compatibility with protected content from Blu-ray players, streaming devices, and computer sources. Note: this kit is designed for point-to-point extension only and is not compatible with matrix switches as a standalone transmitter or receiver.\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-hdmo-bkt-conferx-s-hdbaset-wall-plate-transmitterreceiver-basic-kit-creation-networks-42606.jpg?v=1757899245\" alt=\"AVPro Edge AC-CXWP-HDMO-BKT ConferX’s HDBaseT Wall Plate Transmitter\/Receiver Basic Kit - Creation Networks\" style=\"max-width:100%;margin:16px 0;\"\u003e\n\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKit Contents\u003c\/td\u003e\n\u003ctd\u003e1x wall plate transmitter (AC-CXWP-HDMO-T) + 1x receiver (AC-EX70-UHD-BR)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Distance (4K)\u003c\/td\u003e\n\u003ctd\u003e40 meters (130 ft) over CAT6A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Distance (1080p)\u003c\/td\u003e\n\u003ctd\u003e70 meters (230 ft) over CAT6A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K30 4:4:4 \/ 4K60 4:2:0\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.2 and earlier\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWall Plate Form\u003c\/td\u003e\n\u003ctd\u003eSingle gang, Decora-type (USA standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eWall plate powered by receiver — no local PSU needed at transmitter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete point-to-point HDBaseT kit — transmitter and receiver included, no additional components required\u003c\/li\u003e\n  \u003cli\u003eSingle-gang Decora wall plate transmitter fits standard USA mud rings and electrical boxes\u003c\/li\u003e\n  \u003cli\u003eNo local power required at the wall plate — powered via HDBaseT from the receiver\u003c\/li\u003e\n  \u003cli\u003e4K30 4:4:4 transmission up to 40 meters; 1080p up to 70 meters over CAT6A\u003c\/li\u003e\n  \u003cli\u003eHDMI 2.0 input; 4K30 4:4:4 and 4K60 4:2:0 support\u003c\/li\u003e\n  \u003cli\u003eHDCP 2.2 and all earlier versions supported\u003c\/li\u003e\n  \u003cli\u003eFull audio pass-through: 2CH PCM, 5.1, 7.1, Dolby TrueHD, DTS-HD Master Audio, Atmos\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play auto input sensing — no configuration required for basic operation\u003c\/li\u003e\n  \u003cli\u003eCompatible with HDBaseT-equipped displays, projectors, and AVRs\u003c\/li\u003e\n  \u003cli\u003eIncluded Decora wall plate cover in white; fits standard single-gang box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConference rooms and boardrooms requiring a clean wall plate HDMI connection for laptop presenters\u003c\/li\u003e\n  \u003cli\u003eClassrooms and lecture halls where the display is located far from the podium or teaching position\u003c\/li\u003e\n  \u003cli\u003eHuddle spaces and small meeting rooms needing quick HDMI extension without complex infrastructure\u003c\/li\u003e\n  \u003cli\u003eSingle-office and home office setups with long cable runs to wall-mounted displays\u003c\/li\u003e\n  \u003cli\u003eRetail and corporate lobby display installations where cable management is a priority\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDMI Version\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (a\/b)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e1 x HDMI (wall plate transmitter)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e1 x HDMI (receiver)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over single CAT6A (UTP or STP)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K30 4:4:4; 4K60 4:2:0\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDCI 2K \/ 1080p\u003c\/td\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.2 and earlier\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Distance (4K)\u003c\/td\u003e\n\u003ctd\u003e40 meters (130 ft) over CAT6A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Distance (1080p)\u003c\/td\u003e\n\u003ctd\u003e70 meters (230 ft) over CAT6A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAudio\u003c\/td\u003e\n\u003ctd\u003eUncompressed PCM 2CH, 5.1, 7.1; Dolby Digital, DTS, Dolby TrueHD, DTS-HD Master Audio, Atmos\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWall Plate Format\u003c\/td\u003e\n\u003ctd\u003eSingle gang, Decora-type (USA standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e12V 2A locking PSU at receiver; wall plate powered via HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIn the Box\u003c\/td\u003e\n\u003ctd\u003eAC-CXWP-HDMO-T (transmitter), Decora wall plate cover (white), 2x long screws, AC-EX70-UHD-BR (receiver), 12V 2A locking PSU\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatibility Note\u003c\/td\u003e\n\u003ctd\u003ePoint-to-point only — not for use with matrix switches\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eAVPro Edge AC-CXWP-HDMO-BKT\u003c\/th\u003e\n\u003cth\u003eKramer WP-789R\/T\u003c\/th\u003e\n\u003cth\u003eExtron WP 400 A\/V\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKit Type\u003c\/td\u003e\n\u003ctd\u003eComplete kit (TX + RX)\u003c\/td\u003e\n\u003ctd\u003eSold separately (TX and RX)\u003c\/td\u003e\n\u003ctd\u003eWall plate only — receiver sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Resolution (4K)\u003c\/td\u003e\n\u003ctd\u003e4K30 4:4:4 \/ 4K60 4:2:0\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax 4K Distance\u003c\/td\u003e\n\u003ctd\u003e40m over CAT6A\u003c\/td\u003e\n\u003ctd\u003e40m over CAT6A\u003c\/td\u003e\n\u003ctd\u003e40m over CAT6A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWall Plate Form Factor\u003c\/td\u003e\n\u003ctd\u003eSingle gang, Decora\u003c\/td\u003e\n\u003ctd\u003eSingle gang\u003c\/td\u003e\n\u003ctd\u003eSingle gang\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWall Plate Power\u003c\/td\u003e\n\u003ctd\u003eNo local power needed\u003c\/td\u003e\n\u003ctd\u003eNo local power needed\u003c\/td\u003e\n\u003ctd\u003eNo local power needed\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMatrix Switch Compatible\u003c\/td\u003e\n\u003ctd\u003eNo — kit use only\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEntry Price\u003c\/td\u003e\n\u003ctd\u003eLower — kit included\u003c\/td\u003e\n\u003ctd\u003eHigher — components priced separately\u003c\/td\u003e\n\u003ctd\u003eHigher — components priced separately\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003e\u003cstrong\u003eCan I use the wall plate transmitter with a different receiver or matrix switch?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eNo. The AC-CXWP-HDMO-BKT is designed and warranted for use exclusively as a matched kit. The transmitter is not compatible with third-party receivers or matrix switch HDBaseT inputs. For matrix-compatible HDBaseT wall plates, consider AVPro Edge's higher-tier ConferX products.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat cable type is required?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eCAT6A (UTP or STP) is required for maximum performance — 40m at 4K and 70m at 1080p. CAT5e may work at shorter distances and lower resolutions, but CAT6A is the specified and recommended cable type.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eDoes the wall plate need its own power supply?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eNo. The wall plate transmitter draws power from the receiver via the HDBaseT cable, so no local power outlet or injector is needed at the presenter's wall plate position.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eIs Dolby Atmos supported?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. The kit passes the full HDMI audio bitstream including Dolby Atmos object metadata, Dolby TrueHD, and DTS-HD Master Audio to a connected display or AVR.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"AVPro Edge","offers":[{"title":"Default Title","offer_id":43296433176812,"sku":"AC-CXWP-HDMO-BKT","price":1009.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-hdmo-bkt-conferx-s-hdbaset-wall-plate-transmitterreceiver-basic-kit-creation-networks-42606.jpg?v=1757899245"},{"product_id":"av-pro-edge-ac-cxwp-vga-t-hdmi-or-vga-wall-plate-transmitter-via-hdbaset","title":"AVPro Edge AC-CXWP-VGA-T HDMI or VGA Wall Plate Transmitter via HDBaseT","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe AVPro Edge AC-CXWP-VGA-T is a single-gang HDBaseT wall plate transmitter that accepts either HDMI or VGA input and extends those signals over a single CAT-6A cable to a compatible HDBaseT receiver. Purpose-built for the ConferX product line, it is designed to simplify AV integration in legacy-friendly environments—conference rooms, classrooms, huddle spaces, and training facilities where both HDMI-equipped modern sources and VGA-output older devices must coexist at the same connection point.\u003c\/p\u003e\n\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-vga-t-hdmi-or-vga-wall-plate-transmitter-via-hdbaset-creation-networks-29660.jpg?v=1757899261\" alt=\"AVPro Edge AC-CXWP-VGA-T HDMI or VGA Wall Plate Transmitter via HDBaseT - Creation Networks\" style=\"max-width:100%;margin-bottom:16px;\"\u003e\n\u003cp\u003eInstalled into any standard single-gang Decora mud ring, the AC-CXWP-VGA-T auto-senses which input is active and switches accordingly—no user intervention required. Paired with a compatible HDBaseT receiver such as the AC-EX70-444-RNE-P, it delivers 1080p signals up to 100 meters (330 ft) and 4K signals up to 70 meters (230 ft) over CAT-6A. The transmitter draws power via PoE from the receiver, eliminating the need for a local power outlet at the wall plate location, which is a significant advantage during new construction or retrofit work where electrical access is limited.\u003c\/p\u003e\n\u003cp\u003eThe unit supports HDCP 2.2 and earlier, handles HDR 4:2:2 12-bit content, and passes audio formats including Dolby TrueHD, DTS HD-Master Audio, and Atmos. ESD protection up to 7kV is built in at both inputs and outputs. A 10-year warranty is included, consistent with AVPro Edge's ConferX line warranty policy.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-vga-t-hdmi-or-vga-wall-plate-transmitter-via-hdbaset-creation-networks-78521.jpg?v=1757899262\" alt=\"AVPro Edge AC-CXWP-VGA-T HDMI or VGA Wall Plate Transmitter via HDBaseT - Creation Networks\" style=\"max-width:100%;margin-bottom:16px;\"\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-input: HDMI 2.0 and VGA auto-sensing — one wall plate covers both modern and legacy sources\u003c\/li\u003e\n  \u003cli\u003eHDBaseT transmission over single CAT-6A cable (no HDMI cable runs required)\u003c\/li\u003e\n  \u003cli\u003e1080p up to 100 meters (330 ft); 4K up to 70 meters (230 ft) with compatible receiver\u003c\/li\u003e\n  \u003cli\u003e4K 30Hz 4:4:4 and 4K 60Hz 4:2:0 HDMI support; VGA DCI 2K and 1920x1080x60 support\u003c\/li\u003e\n  \u003cli\u003eHDR 4:2:2 12-bit and HDCP 2.2 compliance\u003c\/li\u003e\n  \u003cli\u003ePoE-powered from receiver — no local power outlet required at wall plate\u003c\/li\u003e\n  \u003cli\u003eCEC passthrough for display power control\u003c\/li\u003e\n  \u003cli\u003eAudio support: PCM 2ch\/5.1\/7.1, Dolby Digital, DTS, TrueHD, DTS-HD Master, Atmos\u003c\/li\u003e\n  \u003cli\u003eESD protection up to 7kV on all inputs and outputs\u003c\/li\u003e\n  \u003cli\u003eSingle-gang Decora form factor — fits standard US electrical boxes and mud rings\u003c\/li\u003e\n  \u003cli\u003eStraight-in rear RJ45 for clean, low-profile wall installation\u003c\/li\u003e\n  \u003cli\u003eCascade-capable for extended distances\u003c\/li\u003e\n  \u003cli\u003e10-year AVPro Edge ConferX warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eK-12 and higher-education classrooms where teachers use both laptops (HDMI) and older document cameras or desktop PCs (VGA)\u003c\/li\u003e\n  \u003cli\u003eCorporate conference rooms requiring a single wall plate connection point for BYOD HDMI and legacy VGA sources\u003c\/li\u003e\n  \u003cli\u003eGovernment and military training rooms with mixed-generation AV equipment\u003c\/li\u003e\n  \u003cli\u003eHuddle spaces and collaboration rooms where minimizing visible cables and hardware is a priority\u003c\/li\u003e\n  \u003cli\u003eAuditoriums and presentation halls with podium AV connection plates serving multiple presenter types\u003c\/li\u003e\n  \u003cli\u003eRetrofit AV installations where re-wiring for HDMI to each room is not feasible and existing VGA infrastructure must be preserved\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead style=\"background-color:#f0f0f0;\"\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAC-CXWP-VGA-T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput 1\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (a\/b) — auto-sensing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput 2\u003c\/td\u003e\n\u003ctd\u003eVGA (DCI 2K, 1920x1080x60)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over CAT-6A (single RJ45)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDMI Resolution\u003c\/td\u003e\n\u003ctd\u003e4K 30Hz 4:4:4; 4K 60Hz 4:2:0 8-bit; HDR 4:2:2 12-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTransmission Distance\u003c\/td\u003e\n\u003ctd\u003eUp to 100m (330 ft) at 1080p; up to 70m (230 ft) at 4K (CAT-6A)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.2 and earlier\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAudio\u003c\/td\u003e\n\u003ctd\u003ePCM 2ch, 5.1, 7.1; Dolby Digital; DTS; Dolby TrueHD; DTS-HD Master Audio; Atmos\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCEC\u003c\/td\u003e\n\u003ctd\u003ePassthrough supported\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePoE from receiver (no local supply required); optional local power\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eESD Protection\u003c\/td\u003e\n\u003ctd\u003e7kV (inputs and outputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eSingle-gang Decora; fits US single-gang boxes and mud rings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCascade\u003c\/td\u003e\n\u003ctd\u003eSupported for ultra-long distance runs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e10-year AVPro Edge ConferX warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead style=\"background-color:#f0f0f0;\"\u003e\n    \u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eAVPro Edge AC-CXWP-VGA-T\u003c\/th\u003e\n\u003cth\u003eKramer WP-789TXR\u003c\/th\u003e\n\u003cth\u003eExtron WP 400\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003eHDMI + VGA (auto-sensing)\u003c\/td\u003e\n\u003ctd\u003eHDMI + VGA + USB-C\u003c\/td\u003e\n\u003ctd\u003eHDMI + VGA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTransmission\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over CAT-6A\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over CAT-5e\/6\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over CAT-5e\/6\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e4K Distance\u003c\/td\u003e\n\u003ctd\u003eUp to 70m at 4K\u003c\/td\u003e\n\u003ctd\u003eUp to 70m at 4K\u003c\/td\u003e\n\u003ctd\u003eUp to 60m at 4K (varies by model)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePoE from receiver — no local supply\u003c\/td\u003e\n\u003ctd\u003ePoE from receiver\u003c\/td\u003e\n\u003ctd\u003eRequires local power or PoE (model-dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eESD Protection\u003c\/td\u003e\n\u003ctd\u003e7kV\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e10 years\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eSingle-gang Decora (US standard)\u003c\/td\u003e\n\u003ctd\u003eSingle-gang EU\/US\u003c\/td\u003e\n\u003ctd\u003eSingle-gang Decora (US standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003e\u003cstrong\u003eCan the AC-CXWP-VGA-T use both HDMI and VGA inputs at the same time?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eNo. The unit auto-senses which input is active and transmits that signal. It does not combine or switch between inputs simultaneously—it is designed to be a single-source-at-a-time connection point.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eDoes the wall plate require a local power outlet?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eNo. Power is supplied via PoE from a compatible HDBaseT receiver such as the AC-EX70-444-RNE-P. An optional local 12V supply can be used if connecting to a non-PoE HDBaseT device.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat cable type is required for 4K transmission at 70 meters?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eCAT-6A is required to achieve 4K at 70 meters (230 ft). CAT-6 may be used for shorter distances at lower resolutions. CAT-5e is not recommended for 4K runs.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eIs the unit compatible with any HDBaseT receiver?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe AC-CXWP-VGA-T is compatible with HDBaseT-compliant receivers. Full feature support (including PoE power and maximum distance) is guaranteed when paired with AVPro Edge ConferX receivers. Third-party HDBaseT receivers may work but compatibility should be verified per installation.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat does the 10-year warranty cover?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eAVPro Edge's ConferX 10-year warranty covers defects in materials and workmanship under normal use conditions. Contact Creation Networks for full warranty terms and RMA procedures.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"AVPro Edge","offers":[{"title":"Default Title","offer_id":43296438419692,"sku":"AC-CXWP-VGA-T","price":834.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-vga-t-hdmi-or-vga-wall-plate-transmitter-via-hdbaset-creation-networks-29660.jpg?v=1757899261"},{"product_id":"av-pro-edge-ac-cxwp-hdmo-t-hdmi-wall-plate-transmitter-via-hdbaset-1","title":"AVPro Edge AC-CXWP-USBC-T HDMI or USB-C Wall Plate Transmitter via HDBaseT","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AVPro Edge AC-CXWP-USBC-T is a single-gang HDBaseT wall plate transmitter from the ConferX product line, designed to give presenters in conference rooms, classrooms, and huddle spaces a clean, tool-free connection point for any laptop or mobile device. It accepts both HDMI 2.0 and USB-C (USB 3.1 Gen 2) video inputs and transmits the signal over a single CAT6A cable to a compatible HDBaseT receiver, reaching up to 100 meters at 1080p and 70 meters at 4K. Power is supplied via Power over Ethernet from the receiver end, eliminating the need for a local power outlet or wall transformer at the wall plate. Built to military-grade standards and backed by a 10-year warranty, it is one of the most durable and installer-friendly wall plate transmitters available for BYOD meeting environments.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eBYOD conference rooms require a connection point that works reliably with any source a presenter brings — whether a laptop with HDMI, a newer laptop or tablet with USB-C, or a desktop workstation. The AC-CXWP-USBC-T handles both input types on a single gang plate, with plug-and-play auto-sensing that activates the connected input automatically without requiring the presenter or room occupant to press any button or navigate a menu. The unit fits any standard US single-gang mud ring or Decora-style wall box, making it a direct replacement for conventional wall plates in retrofit and new construction projects.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-usbc-t-hdmi-or-usb-c-wall-plate-transmitter-via-hdbaset-creation-networks-12914.jpg?v=1757899263\" alt=\"AVPro Edge AC-CXWP-USBC-T HDMI or USB-C Wall Plate Transmitter via HDBaseT - Creation Networks\" style=\"max-width:100%;margin:16px 0;\"\u003e\n\u003cp\u003eSignal transmission over the HDBaseT link carries HDMI video, audio, control (CEC), and power on a single CAT6A run. When paired with the AC-EX70-444-RNE-P receiver or another PoE-capable HDBaseT endpoint, no local power supply is needed at the wall plate itself — power is drawn from the far end through the same cable used for signal. The straight-in rear RJ45 jack design reduces installation depth requirements and simplifies pulling cable through tight wall cavities. ESD protection circuitry on all inputs and outputs protects both the wall plate and connected devices against electrostatic events up to 7KV.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-usbc-t-hdmi-or-usb-c-wall-plate-transmitter-via-hdbaset-creation-networks-87923.jpg?v=1757899264\" alt=\"AVPro Edge AC-CXWP-USBC-T HDMI or USB-C Wall Plate Transmitter via HDBaseT - Creation Networks\" style=\"max-width:100%;margin:16px 0;\"\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Input: HDMI 2.0 and USB-C\u003c\/strong\u003e — Accepts HDMI 2.0a\/b and USB-C (USB 3.1 Gen 2) video sources on a single wall plate, serving both legacy and modern laptops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Auto-Sensing\u003c\/strong\u003e — Automatically detects and activates the connected input; no user interaction or button press required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT Transmission over CAT6A\u003c\/strong\u003e — Transmits video, audio, CEC, and power on a single CAT6A run to a compatible HDBaseT receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100m at 1080p \/ 70m at 4K\u003c\/strong\u003e — Extends 1080p up to 330 feet and 4K up to 230 feet over standard CAT6A infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower over Ethernet (PoE)\u003c\/strong\u003e — Powered by the receiver end through the HDBaseT cable; no local power outlet or wall transformer needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Gang Decora Form Factor\u003c\/strong\u003e — Fits any standard US single-gang mud ring or Decora wall box for clean, low-profile installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K60 4:2:0 and HDR 4:2:2 12-Bit Support\u003c\/strong\u003e — Carries 4K at 60Hz and HDR 12-bit signals for high-quality presentation and display environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.2 Compliant\u003c\/strong\u003e — Supports current copy protection for protected media playback from compliant sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight-In Rear RJ45 Jack\u003c\/strong\u003e — Rear connector design reduces depth and simplifies cable pull-through in standard wall boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD Protection to 7KV\u003c\/strong\u003e — All input and output ports include electrostatic discharge protection to safeguard connected devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilitary-Grade Construction\u003c\/strong\u003e — Low-heat, rugged chassis with a 10-year manufacturer warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCEC Pass-Through\u003c\/strong\u003e — Consumer Electronics Control signals pass through the HDBaseT link for display power management automation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCorporate conference rooms and boardrooms requiring BYOD HDMI and USB-C connection points\u003c\/li\u003e\n\u003cli\u003eUniversity and K-12 classroom installations where students and instructors connect a variety of laptop types\u003c\/li\u003e\n\u003cli\u003eHuddle rooms and collaboration spaces with a minimalist wall plate presentation solution\u003c\/li\u003e\n\u003cli\u003eCourtroom and legal presentation environments needing reliable, low-maintenance presentation connectivity\u003c\/li\u003e\n\u003cli\u003eHealthcare facility conference and consultation rooms requiring clean, hygienic, fixed-install input points\u003c\/li\u003e\n\u003cli\u003eHotel meeting rooms and training centers supporting diverse presenter device types\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Inputs\u003c\/td\u003e\n\u003ctd\u003e1 x HDMI 2.0a\/b, 1 x USB-C (USB 3.1 Gen 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over CAT6A (single cable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution (HDMI)\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0; HDR 4:2:2 12-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution (USB-C)\u003c\/td\u003e\n\u003ctd\u003eUp to 4K via USB-C video alt mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Distance (1080p)\u003c\/td\u003e\n\u003ctd\u003e100m (330ft) over CAT6A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Distance (4K)\u003c\/td\u003e\n\u003ctd\u003e70m (230ft) over CAT6A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP Support\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2 and earlier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDR Support\u003c\/td\u003e\n\u003ctd\u003eHDR 4:2:2 12-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCEC\u003c\/td\u003e\n\u003ctd\u003ePass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePoE from receiver (no local power required); optional local power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eSingle-gang Decora (US standard mud ring compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Connector\u003c\/td\u003e\n\u003ctd\u003eStraight-in RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eESD Protection\u003c\/td\u003e\n\u003ctd\u003eUp to 7KV on all ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e10 years (ConferX line)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn the Box\u003c\/td\u003e\n\u003ctd\u003eTransmitter unit, Decora wall plate cover (white), 2 x long electrical screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eAVPro Edge AC-CXWP-USBC-T\u003c\/th\u003e\n\u003cth\u003eKramer WP-789TXR\u003c\/th\u003e\n\u003cth\u003eExtron WP 400T\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Input\u003c\/td\u003e\n\u003ctd\u003eYes (HDMI 2.0)\u003c\/td\u003e\n\u003ctd\u003eYes (HDMI 2.0)\u003c\/td\u003e\n\u003ctd\u003eYes (HDMI 2.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-C Video Input\u003c\/td\u003e\n\u003ctd\u003eYes (USB 3.1 Gen 2)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuto Input Sensing\u003c\/td\u003e\n\u003ctd\u003eYes (plug-and-play)\u003c\/td\u003e\n\u003ctd\u003eManual selection\u003c\/td\u003e\n\u003ctd\u003eManual selection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax 4K Distance\u003c\/td\u003e\n\u003ctd\u003e70m (230ft)\u003c\/td\u003e\n\u003ctd\u003e70m (230ft)\u003c\/td\u003e\n\u003ctd\u003e40m (130ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax HD Distance\u003c\/td\u003e\n\u003ctd\u003e100m (330ft)\u003c\/td\u003e\n\u003ctd\u003e100m (330ft)\u003c\/td\u003e\n\u003ctd\u003e70m (230ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Power Required\u003c\/td\u003e\n\u003ctd\u003eNo (PoE from receiver)\u003c\/td\u003e\n\u003ctd\u003eNo (PoE)\u003c\/td\u003e\n\u003ctd\u003eYes (local)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eESD Protection\u003c\/td\u003e\n\u003ctd\u003eYes (7KV)\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e10 years\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eSingle-gang Decora\u003c\/td\u003e\n\u003ctd\u003eSingle-gang\u003c\/td\u003e\n\u003ctd\u003eSingle-gang\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the USB-C input work with all USB-C cables?\u003c\/strong\u003e\u003cbr\u003eNo. USB-C video output requires that the source device supports USB video alt mode (DisplayPort Alt Mode), and the cable must be rated for USB 3.1 Gen 2 or higher. Cables labeled only for charging or USB 2.0 data will not carry video. Always use cables that explicitly state USB-C 3.1 compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich HDBaseT receiver is recommended for use with the AC-CXWP-USBC-T?\u003c\/strong\u003e\u003cbr\u003eAVPro Edge recommends pairing this transmitter with the AC-EX70-444-RNE-P receiver for full-featured operation including PoE, 4K support, and the maximum 70-meter 4K extension distance. Other PoE-capable HDBaseT receivers are also compatible for 1080p deployments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the wall plate require any programming or configuration after installation?\u003c\/strong\u003e\u003cbr\u003eNo. The AC-CXWP-USBC-T is a plug-and-play device. Input auto-sensing activates the connected source automatically. No installer or user configuration is required for standard operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this wall plate be used with an HDBaseT matrix switcher instead of a dedicated receiver?\u003c\/strong\u003e\u003cbr\u003eYes. The AC-CXWP-USBC-T is compatible with HDBaseT-capable matrix switchers and projectors with native HDBaseT inputs. In configurations without PoE from the far end, optional local power can be used to power the wall plate.\u003c\/p\u003e","brand":"AVPro Edge","offers":[{"title":"Default Title","offer_id":43296441860332,"sku":"AC-CXWP-USBC-T","price":1102.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-usbc-t-hdmi-or-usb-c-wall-plate-transmitter-via-hdbaset-creation-networks-12914.jpg?v=1757899263"},{"product_id":"av-pro-edge-ac-cxwp-kvm-kit-hdmi-and-bi-directional-usb-wall-plate-transmitter-and-receiver-via-hdbaset-kit","title":"AVPro Edge AC-CXWP-KVM-KIT HDMI and Bi-Directional USB Wall Plate Transmitter and Receiver via HDBaseT Kit","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe AVPro Edge AC-CXWP-KVM-KIT is a complete HDBaseT wall plate extender kit that transmits 4K60 4:4:4 HDMI video and bi-directional USB 2.0 signals over a single CAT6a cable. Designed for conference rooms and classrooms supporting bring-your-own-device (BYOD) workflows, the kit enables KVM-over-HDBaseT functionality so a room PC or conferencing codec can be controlled from a remote USB keyboard and mouse at the wall plate. It is an ideal HDMI KVM wall plate extender for huddle rooms, training centers, and any space where users connect personal laptops alongside a permanently installed room computer. The kit ships as a matched transmitter and receiver pair, reducing procurement and commissioning time.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe AC-CXWP-KVM-KIT pairs a flush-mount HDMI wall plate transmitter with a rack or shelf-mounted HDBaseT receiver, connected by a single CAT6a cable run of up to 40 meters at 4K60 4:4:4. The transmitter accepts an HDMI 2.0 source from a guest laptop or room device, while the bi-directional USB 2.0 path allows a USB hub, keyboard, mouse, or USB microphone connected at either end to communicate with a host at the other end — enabling full KVM control across the cable run.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-kvm-kit-hdmi-and-bi-directional-usb-wall-plate-transmitter-and-receiver-via-hdbaset-kit-creation-networks-78871.jpg?v=1757899267\" alt=\"AVPro Edge AC-CXWP-KVM-KIT HDMI and Bi-Directional USB Wall Plate Transmitter and Receiver via HDBaseT Kit - Creation Networks\" style=\"max-width:100%;margin:1em 0;\"\u003e\u003cp\u003eAVPro Edge's proprietary Invisible Compression Technology (ICT) maintains signal integrity at 18Gbps bandwidth without visible compression artifacts or color banding, making 4K HDR content indistinguishable from a direct HDMI connection. The transmitter includes a built-in 4K-to-1080p downscaler for rooms with legacy projectors, along with comprehensive EDID management options covering eight presets plus a user-copyable EDID profile. Audio Return Channel (ARC) support routes TV audio upstream to an A\/V receiver or amplifier without additional cabling.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-kvm-kit-hdmi-and-bi-directional-usb-wall-plate-transmitter-and-receiver-via-hdbaset-kit-creation-networks-74285.jpg?v=1757899268\" alt=\"AVPro Edge AC-CXWP-KVM-KIT HDMI and Bi-Directional USB Wall Plate Transmitter and Receiver via HDBaseT Kit - Creation Networks\" style=\"max-width:100%;margin:1em 0;\"\u003e\u003cp\u003eBoth the transmitter and receiver include built-in test pattern generators (1080p and 4K) for rapid infrastructure verification during installation and service calls. Bidirectional 48V Power over HDBaseT (PoH) means only one power supply is needed for the pair. ESD protection rated to 7kV is built into all inputs and outputs to guard against electrical damage in high-traffic environments.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K60 4:4:4 18Gbps HDBaseT Extension\u003c\/strong\u003e — Transmits full-bandwidth 4K with HDR, HDR10+, and HLG over a single CAT6a cable up to 40 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-Directional USB 2.0 KVM\u003c\/strong\u003e — USB signals travel in both directions up to 250 Mbps, enabling keyboard, mouse, USB mic, and peripheral sharing between the wall plate and a room PC or codec.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInvisible Compression Technology (ICT)\u003c\/strong\u003e — AVPro Edge's proprietary encoding delivers 18Gbps-class signals over category cable without visible compression artifacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Plate Transmitter Form Factor\u003c\/strong\u003e — Flush-mount design integrates cleanly into conference table boxes, floor boxes, or wall plates without exposed cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K-to-1080p Downscaling\u003c\/strong\u003e — Built-in scaler in the transmitter handles mixed-resolution environments where legacy projectors or displays are present.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive EDID Management\u003c\/strong\u003e — Eight factory EDID presets plus a user EDID copy function ensure correct resolution and audio codec negotiation from any source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Return Channel (ARC)\u003c\/strong\u003e — Passes ARC audio upstream from the display to an A\/V receiver or amplifier without additional cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-Directional 48V PoH\u003c\/strong\u003e — Single power supply powers both TX and RX units over the HDBaseT cable, reducing installation hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Test Pattern Generation\u003c\/strong\u003e — Both TX and RX include 1080p and 4K test patterns for infrastructure verification without an external source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.2 and CEC Pass-Through\u003c\/strong\u003e — Full HDCP 2.2 compliance and CEC signal pass-through maintain device interoperability across the extended link.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD Protection to 7kV\u003c\/strong\u003e — All input and output connectors include ESD suppression to protect against damage from electrostatic discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Bi-Directional Transport\u003c\/strong\u003e — Control signals travel with the video link, supporting control system integration and IR device control at the display end.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms with BYOD laptop connections at the table and a permanently installed room PC in the AV rack — the KVM path allows the room keyboard and mouse to control either device\u003c\/li\u003e\n\u003cli\u003eHigher education classrooms where an instructor wall plate must accept guest laptop HDMI while also supporting USB peripheral sharing with a teaching station PC\u003c\/li\u003e\n\u003cli\u003eHuddle rooms and small meeting spaces where a clean wall plate aesthetic is required alongside reliable 4K video and USB extension\u003c\/li\u003e\n\u003cli\u003eCorporate training rooms running USB-connected microphone or camera arrays that need to be routed to a conferencing PC in a remote equipment closet\u003c\/li\u003e\n\u003cli\u003eAny installation where legacy 1080p displays must coexist with 4K source devices — the built-in downscaler handles resolution mismatch transparently\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"border:1px solid #ccc;padding:8px;text-align:left;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ccc;padding:8px;text-align:left;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eAC-CXWP-KVM-KIT (TX + RX pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eVideo Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eHDMI 2.0 (a\/b) at TX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eVideo Output\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eHDMI 2.0 at RX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eMaximum Bandwidth\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e18 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eMaximum Resolution\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e4K60 4:4:4 HDR (Cat6a, up to 40m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eHDR Support\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eHDR, HDR10+, HLG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eUSB\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eBi-directional USB 2.0, up to 250 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eTransmission Medium\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eSingle CAT6a UTP\/STP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eMaximum Distance (4K)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e40 meters (Cat6a)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eDownscaling\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e4K to 1080p (built into TX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eEDID Options\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e8 factory presets + user EDID copy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eAudio\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003ePCM 2ch, LPCM 5.1\/7.1, Dolby TrueHD, DTS HD-Master, Atmos; 2ch extraction at TX; Toslink input at RX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eARC\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eYes (HDMI ARC upstream)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eHDCP\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eHDCP 2.2 and all earlier versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003ePower\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eBi-directional 48V PoH (one PSU required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eESD Protection\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e7kV (all inputs and outputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eControl\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eBi-directional RS-232, IR (3-20V protected), CEC pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eTX Form Factor\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eWall plate (flush mount)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cp\u003eThe AC-CXWP-KVM-KIT is compared below against the Kramer WP-789R\/T and the Extron WP 400 — two commonly specified HDBaseT wall plate extender kits in the commercial AV market. Key differentiators are noted for each criterion.\u003c\/p\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"border:1px solid #ccc;padding:8px;text-align:left;\"\u003eCriteria\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ccc;padding:8px;text-align:left;\"\u003eAVPro Edge AC-CXWP-KVM-KIT\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ccc;padding:8px;text-align:left;\"\u003eKramer WP-789R\/T\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ccc;padding:8px;text-align:left;\"\u003eExtron WP 400\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eMaximum Video Resolution\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e4K60 4:4:4 HDR at 18 Gbps over Cat6a up to 40m — full-bandwidth 4K without chroma subsampling\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e4K60 4:2:0 at longer distances; 4:4:4 at reduced range — chroma subsampling may affect color-critical applications\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e4K30 or 1080p60 over HDBaseT depending on cable category — limited 4K60 support at full color depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eBi-Directional USB \/ KVM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eFull bi-directional USB 2.0 at up to 250 Mbps on both TX and RX — supports USB hubs, mics, cameras, and HID devices at either end\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eUSB extension supported on select WP-789 variants; verify specific model for bi-directional capability and device class support\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eUSB HID pass-through on some WP 400 variants; high-bandwidth USB device support may require additional hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eBuilt-In Downscaling\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e4K-to-1080p downscaler built into the TX unit — handles mixed-resolution rooms without an external scaler\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eDownscaling not a standard feature on WP-789R\/T — mixed-resolution deployments may require an external scaler\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eScaling capabilities vary by WP 400 model; confirm datasheet for downscaling support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eEDID Management\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eEight factory EDID presets plus user EDID copy — covers the widest range of display and audio codec negotiation scenarios\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eKramer EDID management via K-Config software — capable but requires software tool access for non-standard EDID configurations\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eExtron EDID management via hardware DIP switches or SIS commands — reliable but fewer presets than the AVPro Edge kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eTest Pattern Generation\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eBoth TX and RX include 1080p and 4K test patterns — allows infrastructure verification from either end of the cable run without a source device\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eTest patterns not a standard feature on WP-789R\/T — separate test equipment needed for cable verification\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eTest patterns not included on WP 400 — cable verification requires an external test source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eESD Protection\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003e7kV ESD protection on all inputs and outputs — important for table-mounted installations subject to user handling\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eStandard ESD protection per HDMI and HDBaseT spec; 7kV-rated suppression not explicitly documented\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ccc;padding:8px;\"\u003eExtron applies standard circuit protection; 7kV-rated ESD suppression not specified on WP 400 datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat does bi-directional USB mean in the context of this kit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e\u003cp\u003eBi-directional USB means USB data travels in both directions over the HDBaseT cable. A USB keyboard or mouse connected at the wall plate (TX) can control a PC located at the receiver (RX), and conversely, a USB device connected at the RX can be accessed by a source device at the TX. This enables KVM functionality — controlling a room PC from the conference table — without separate USB extension hardware.\u003c\/p\u003e\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat USB device types are supported?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e\u003cp\u003eThe USB 2.0 path supports HID devices (keyboard, mouse), USB audio devices including USB microphones, and other USB 2.0 peripherals operating within the 250 Mbps bandwidth envelope. USB 3.0 devices are not supported over the HDBaseT link; they would need a direct connection or a separate USB 3.0 extender.\u003c\/p\u003e\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow far can the kit transmit 4K60 4:4:4 signal?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e\u003cp\u003eThe AC-CXWP-KVM-KIT supports 4K60 4:4:4 HDR transmission up to 40 meters using CAT6a cable. At shorter distances or with CAT6 cable, signal quality should be verified against the AVPro Edge cable distance chart, as performance can vary with cable quality and ambient conditions.\u003c\/p\u003e\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes this kit need two power supplies?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e\u003cp\u003eNo. The bidirectional 48V Power over HDBaseT (PoH) feature means one power supply at either the TX or RX powers both units over the same CAT cable. This reduces the number of power outlets and wall warts required during installation.\u003c\/p\u003e\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan the transmitter's downscaler handle a 4K source connected to a 1080p projector?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e\u003cp\u003eYes. The downscaler built into the TX unit converts 4K video down to 1080p before transmission, so a 4K laptop or media player connected at the wall plate will output a 1080p signal at the display end. This is configured via EDID management or the unit's DIP switch settings.\u003c\/p\u003e\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this kit compatible with room control systems for switching or routing control?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e\u003cp\u003eYes. The I-Pass feature provides a control system pass-through interface, and the kit supports bi-directional RS-232 and IR transport over the HDBaseT link. This allows a control processor in the equipment room to send commands to the wall plate or connected devices without separate control cabling.\u003c\/p\u003e\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"AVPro Edge","offers":[{"title":"Default Title","offer_id":43296445530348,"sku":"AC-CXWP-KVM-KIT","price":1936.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-cxwp-kvm-kit-hdmi-and-bi-directional-usb-wall-plate-transmitter-and-receiver-via-hdbaset-kit-creation-networks-78871.jpg?v=1757899267"},{"product_id":"av-pro-edge-ac-mxnet-1g-ewp-mxnet-1g-wall-plate-encoder-device","title":"AVPro Edge AC-MXNET-1G-EWP MXNet 1G Wall Plate Encoder Device","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AVPro Edge AC-MXNET-1G-EWP is a dual-gang Decora wall plate encoder for the MXNet 1G AV-over-IP ecosystem, allowing integrators to place a flush-mounted HDMI input anywhere a standard dual-gang electrical box exists and feed that signal into an MXNet distribution network over standard CAT5e or CAT6A cabling. The encoder converts the HDMI source signal into JPEG2000-compressed IP multicast packets at up to 850Mbps peak, enabling 4K60 4:4:4 video to be routed to any number of MXNet decoder endpoints across a Gigabit network switch. At $889, it is the purpose-built on-ramp for BYOD and fixed-source connections in conference rooms, huddle spaces, and classrooms where a rack-mounted encoder would be impractical. The unit also supports USB\/KVM routing, RS-232, and IR signal passthrough for complete AV-over-IP control from the wall plate position.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe AC-MXNET-1G-EWP integrates the encoding functionality of AVPro Edge's MXNet 1G encoder into a dual-gang Decora wall plate form factor, removing the need for a separate rack-mounted encoder at the source end of each input. An HDMI cable connects the presenter's device or a fixed source to the wall plate, and a single CAT5e or CAT6A cable from the wall plate RJ45 jack connects directly to the MXNet-compatible Gigabit network switch. From there, the encoded signal is multicast across the network to any designated MXNet decoder endpoint — including standard rack-mount decoders and display-mounted decoder units. MXNet Mentor, AVPro Edge's graphical setup and routing software, manages the encoder alongside all other MXNet nodes, providing drag-and-drop routing, resolution scaling, video wall configuration, and EDID management from a single interface. The JPEG2000 codec used by MXNet supports both lossy and lossless compression modes, genlock for video wall synchronization, 10-bit color, and HDR color space information. A built-in OLED \"Data Window\" display on the encoder shows connection status and signal information without requiring a laptop, while full exterior light control allows all LEDs — including network link lights — to be disabled for discreet installations. RS-232 and IR signals can be routed through the encoder directly to one or multiple decoder endpoints, and a USB-B host port supports USB\/KVM device routing to a specified decoder for shared peripheral access.\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-mxnet-1g-ewp-mxnet-1g-wall-plate-encoder-device-creation-networks-40584.webp?v=1757899362\" alt=\"AVPro Edge AC-MXNET-1G-EWP MXNet 1G Wall Plate Encoder Device - Creation Networks\" style=\"max-width:100%;margin:16px 0;\"\u003e\n\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eDual-gang Decora wall plate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDMI Version\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0, 18Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNetwork Rate\u003c\/td\u003e\n\u003ctd\u003e1G maximum; 200Mbps (1080p), 300Mbps (4K30), 850Mbps peak (4K60)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCodec\u003c\/td\u003e\n\u003ctd\u003eJPEG2000 (lossy and lossless)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003eCAT5e or better (CAT6A recommended)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eControl Routing\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, USB\/KVM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.3 and all earlier versions\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-gang Decora wall plate form factor — fits any standard USA dual-gang mud ring\u003c\/li\u003e\n  \u003cli\u003eHDMI 2.0 input with 18Gbps support and HDCP 2.3 compliance\u003c\/li\u003e\n  \u003cli\u003eJPEG2000 encoding at flexible data rates: 200Mbps (1080p), 300Mbps (4K30), 850Mbps peak (4K60)\u003c\/li\u003e\n  \u003cli\u003eMulticast distribution to unlimited MXNet decoder endpoints over Gigabit network infrastructure\u003c\/li\u003e\n  \u003cli\u003eManaged via MXNet Mentor software for routing, scaling, EDID, and video wall configuration\u003c\/li\u003e\n  \u003cli\u003eBuilt-in OLED \"Data Window\" display for on-device status without a connected computer\u003c\/li\u003e\n  \u003cli\u003eFull exterior light control — all LEDs including network link lights can be disabled for discreet installs\u003c\/li\u003e\n  \u003cli\u003eRS-232 and IR signal routing to single or multiple decoder endpoints\u003c\/li\u003e\n  \u003cli\u003eUSB-B host port for USB\/KVM device routing to a specified decoder\u003c\/li\u003e\n  \u003cli\u003eSFP fiber port for long-distance network connections\u003c\/li\u003e\n  \u003cli\u003eGENLOCK support for synchronized video wall output across multiple decoders\u003c\/li\u003e\n  \u003cli\u003eCompatible with Netgear switches with dedicated AVPro Edge profile for simplified switch configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConference rooms and boardrooms requiring a flush-mounted HDMI connection for laptop or BYOD presenters\u003c\/li\u003e\n  \u003cli\u003eHuddle spaces and small meeting rooms within a larger MXNet AV-over-IP distribution system\u003c\/li\u003e\n  \u003cli\u003eUniversity and K-12 classrooms needing BYOD input encoding at the podium or teaching wall\u003c\/li\u003e\n  \u003cli\u003eCorporate campuses with centralized MXNet infrastructure serving multiple rooms from a shared decoder pool\u003c\/li\u003e\n  \u003cli\u003eControl rooms and NOCs where source inputs need to be cleanly integrated at the wall level\u003c\/li\u003e\n  \u003cli\u003eHotel meeting spaces with fixed and BYOD source requirements feeding a common display network\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDMI Version\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDMI Bandwidth\u003c\/td\u003e\n\u003ctd\u003e18Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.3 and all earlier versions\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCodec\u003c\/td\u003e\n\u003ctd\u003eJPEG2000 (lossy and lossless; 10-bit color; genlock support)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNetwork Rate\u003c\/td\u003e\n\u003ctd\u003e1G max; 200Mbps at 1080p, 300Mbps at 4K30, 850Mbps peak at 4K60\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNetwork Cable\u003c\/td\u003e\n\u003ctd\u003eCAT5e or better (CAT6A or better recommended)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNetwork Connection\u003c\/td\u003e\n\u003ctd\u003eRJ45 (Gigabit) + SFP fiber port\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232 (direct routing), IR (direct routing), USB-B host (KVM)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eBuilt-in OLED \"Data Window\"\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLight Control\u003c\/td\u003e\n\u003ctd\u003eFull exterior LED disable including network link lights\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eDual-gang Decora wall plate (USA standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSoftware\u003c\/td\u003e\n\u003ctd\u003eMXNet Mentor (setup, routing, EDID, video wall)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIn the Box\u003c\/td\u003e\n\u003ctd\u003eAC-MXNET-1G-EWP encoder, Decora wall plate cover (white), 2x long screws\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eAVPro Edge AC-MXNET-1G-EWP\u003c\/th\u003e\n\u003cth\u003eCrestron DM-NVX-E30C\u003c\/th\u003e\n\u003cth\u003eZeeVee ZyPer4K WP\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eDual-gang Decora wall plate\u003c\/td\u003e\n\u003ctd\u003eSingle-gang wall plate\u003c\/td\u003e\n\u003ctd\u003eDual-gang wall plate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Video\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 (at 850Mbps)\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCodec\u003c\/td\u003e\n\u003ctd\u003eJPEG2000 (lossy\/lossless, genlock)\u003c\/td\u003e\n\u003ctd\u003eH.264\/H.265\u003c\/td\u003e\n\u003ctd\u003eJPEG2000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUSB\/KVM Routing\u003c\/td\u003e\n\u003ctd\u003eYes — USB-B host port\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRS-232 \/ IR Routing\u003c\/td\u003e\n\u003ctd\u003eYes — direct to single or multiple decoders\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOn-Device Display\u003c\/td\u003e\n\u003ctd\u003eOLED Data Window\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLED Disable\u003c\/td\u003e\n\u003ctd\u003eYes — full exterior light control\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEcosystem Lock-in\u003c\/td\u003e\n\u003ctd\u003eMXNet (AVPro Edge)\u003c\/td\u003e\n\u003ctd\u003eDM NVX (Crestron)\u003c\/td\u003e\n\u003ctd\u003eZyPer4K (ZeeVee)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePrice Point\u003c\/td\u003e\n\u003ctd\u003eLower\u003c\/td\u003e\n\u003ctd\u003eHigher (Crestron premium)\u003c\/td\u003e\n\u003ctd\u003eComparable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003e\u003cstrong\u003eDoes the AC-MXNET-1G-EWP require a special network switch?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eIt requires a Gigabit managed network switch capable of IGMP snooping for multicast traffic control. AVPro Edge has worked with Netgear to develop a dedicated AVPro Edge switch profile that simplifies configuration. Other managed switches supporting multicast routing are also compatible when configured appropriately.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eCan this wall plate encoder send to multiple displays at the same time?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. Because MXNet uses IP multicast, a single AC-MXNET-1G-EWP encoder can simultaneously feed any number of MXNet decoder endpoints on the same network without duplicating bandwidth for each display.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eIs the OLED display useful after installation?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes — the built-in OLED Data Window shows the device's IP address, signal status, and connection health without requiring a laptop or software access. However, if the installation requires the encoder to be invisible, all exterior lights including the OLED can be fully disabled.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat software is used to manage routing?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eMXNet Mentor is AVPro Edge's dedicated management tool for the MXNet ecosystem. It provides a graphical network topology view, drag-and-drop source-to-display routing, EDID management, video wall configuration, and resolution scaling — all from a single interface accessible on the local network.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"AVPro Edge","offers":[{"title":"Default Title","offer_id":43299951870188,"sku":"AC-MXNET-1G-EWP","price":916.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/av-pro-edge-ac-mxnet-1g-ewp-mxnet-1g-wall-plate-encoder-device-creation-networks-40584.webp?v=1757899362"},{"product_id":"peerless-av-dual-pole-wall-plate-mod-wp2","title":"Peerless-AV MOD-WP2 – Modular Series Dual-Pole Wall Plate","description":"\u003ch2\u003eMOD-WP2 – Peerless-AV Modular Series Dual-Pole Wall Plate\u003c\/h2\u003e\n\u003cp\u003eThe Peerless-AV MOD-WP2 Dual-Pole Wall Plate is part of the Modular Mount Series, enabling floor-to-wall display placement configurations for flat-panel displays from 46\" to 90\" and projectors up to 423 lb.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-dual-pole-wall-plate-mod-wp2-creation-networks-97373.jpg?v=1757899822\" alt=\"Peerless-AV MOD-WP2 – Modular Series Dual-Pole Wall Plate - Creation Networks\"\u003e\n\u003cp\u003eThe Peerless-AV Modular Mount Series was developed with the professional AV installer in mind, offering a configurable system of components that can be assembled into custom mounting solutions for flat-panel displays and projectors. The MOD-WP2 Dual-Pole Wall Plate serves as the wall anchor point for floor-to-wall display placement applications — a configuration commonly specified in large-format digital signage, exhibit, and retail environments where ceiling mounting is not available or practical.\u003c\/p\u003e\n\u003cp\u003eThe system uses a 2-inch (50 mm) diameter support pole that can be field-cut to the required length on the job site, making the Modular Series particularly well-suited for new installations as well as upgrades to existing mounting infrastructure. This adaptability reduces the need to carry multiple fixed-length pole components and simplifies inventory management for integrators handling varied project types.\u003c\/p\u003e\n\u003cp\u003eAt 10 inches wide and 4.5 inches tall, the MOD-WP2 wall plate is compact enough for clean installation while providing a stable dual-pole mounting base. The 3.5 lb bracket is finished in black and manufactured in the United States. Maximum load capacity is 423.29 lb, covering the heaviest commercial flat-panel displays currently in the 46\" to 90\" range.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for floor-to-wall display placement applications, serving as the wall anchor point for Peerless-AV Modular Mount Series pole assemblies.\u003c\/li\u003e\n\u003cli\u003eCompatible with the 2\" (50 mm) diameter Modular Series support pole, which can be field-cut to length for precise height adjustment on site.\u003c\/li\u003e\n\u003cli\u003eSupports flat-panel displays from 46\" to 90\" and projectors with a maximum combined load capacity of 423.29 lb.\u003c\/li\u003e\n\u003cli\u003ePart of the fully configurable Peerless-AV Modular Mount Series, allowing custom mounting configurations from a limited set of components.\u003c\/li\u003e\n\u003cli\u003eCompact 10\" x 4.5\" footprint provides a stable dual-pole anchor while maintaining a clean wall profile.\u003c\/li\u003e\n\u003cli\u003eFinished in black to match standard Peerless-AV Modular Series components and commercial AV aesthetics.\u003c\/li\u003e\n\u003cli\u003eMade in the United States with professional AV installers as the intended end user.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eMOD-WP2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Display Size\u003c\/td\u003e\n\u003ctd\u003e46\" – 90\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Load Capacity\u003c\/td\u003e\n\u003ctd\u003e423.29 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eFlat Panel Display, Projector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePole Diameter\u003c\/td\u003e\n\u003ctd\u003e2\" (50 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e6.9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.50 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Peerless-AV","offers":[{"title":"Default Title","offer_id":43322385793260,"sku":"MOD-WP2","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-dual-pole-wall-plate-mod-wp2-creation-networks-97373.jpg?v=1757899822"},{"product_id":"peerless-av-double-metal-stud-wall-plate-with-electrical-knockouts-16-centers-wsp425","title":"Peerless-AV WSP425 – Double Metal Stud Wall Plate, 16\" Centers","description":"\u003ch2\u003eWSP425 – Peerless-AV Double Metal Stud Wall Plate with Electrical Knockouts, 16\" Centers\u003c\/h2\u003e\n\u003cp\u003eThe WSP425 is a steel wall plate from Peerless-AV designed to span two metal studs at 16-inch centers, providing solid mounting support for TV wall mounts on metal stud, wood stud, and concrete block walls.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-double-metal-stud-wall-plate-with-electrical-knockouts-16-centers-wsp425-creation-networks-48556.jpg?v=1757899831\" alt='Peerless-AV WSP425 – Double Metal Stud Wall Plate, 16\" Centers - Creation Networks'\u003e\n\u003cp\u003eMetal stud walls present a unique challenge for display mounting because the framing members are thinner and less rigid than wood studs, and standard wall mount plates may not align with both studs at once given standard 16-inch stud spacing. The WSP425 addresses this by spanning the full 16-inch center-to-center distance between metal studs, distributing the load across both framing members rather than relying on a single attachment point.\u003c\/p\u003e\n\u003cp\u003eThe plate is rated for use on 25-gauge or heavier metal studs, which covers the standard framing found in commercial drywall construction. In addition to metal stud walls, the WSP425 can also be used on wood studs, and its backup plate design makes it suitable for concrete block (cinder block) installations where it can be bolted through the wall for added structural support. Electrical knockouts are included to allow a conduit or wiring pass-through, which is useful in situations where cable routing behind the display needs to reach an in-wall electrical box.\u003c\/p\u003e\n\u003cp\u003eMeasuring 12.2 x 17.7 x 1.3 inches and weighing approximately 9.90 lb, the WSP425 is compatible with most Peerless-AV single wall arms. It is manufactured in the United States and carries a 5-year limited warranty.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSpans 16-inch center-to-center metal stud spacing to distribute display mount load across two studs.\u003c\/li\u003e\n  \u003cli\u003eRated for use on 25-gauge or heavier metal stud framing as found in commercial drywall construction.\u003c\/li\u003e\n  \u003cli\u003eCan also be installed on wood studs for installations where framing type varies across a project.\u003c\/li\u003e\n  \u003cli\u003eBackup plate design supports concrete block installations by bolting through the wall from the opposite side.\u003c\/li\u003e\n  \u003cli\u003eElectrical knockouts included to allow cable or conduit routing through the plate during installation.\u003c\/li\u003e\n  \u003cli\u003eCompatible with most Peerless-AV single wall arm mount models for consistent system integration.\u003c\/li\u003e\n  \u003cli\u003eManufactured in the United States with a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eWSP425\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eStud Spacing\u003c\/td\u003e\n\u003ctd\u003e16\" Centers\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMinimum Stud Gauge\u003c\/td\u003e\n\u003ctd\u003e25-gauge metal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCompatible Wall Types\u003c\/td\u003e\n\u003ctd\u003eMetal Stud, Wood Stud, Concrete Block\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eElectrical Knockouts\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e12.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e17.7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e1.3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e9.90 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5-Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePeerless-AV\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$89.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Peerless-AV","offers":[{"title":"Default Title","offer_id":43322386120940,"sku":"WSP425","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-double-metal-stud-wall-plate-with-electrical-knockouts-16-centers-wsp425-creation-networks-48556.jpg?v=1757899831"},{"product_id":"peerless-av-double-metal-stud-wall-plate-w-electrical-knockouts-162024-centers-wsp445","title":"Peerless-AV WSP445 – Double Metal Stud Wall Plate with Electrical Knockouts","description":"\u003ch2\u003eWSP445 – Peerless-AV Double Metal Stud Wall Plate with Electrical Knockouts\u003c\/h2\u003e\n\u003cp\u003eThe Peerless-AV WSP445 is a heavy-duty steel double metal stud wall plate designed for installations on concrete block and cinder block walls, providing a secure backing support for flat-panel display mounts where traditional stud mounting is not feasible.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-double-metal-stud-wall-plate-w-electrical-knockouts-16-20-24-centers-wsp445-creation-networks-73708.jpg?v=1757899832\" alt=\"Peerless-AV WSP445 – Double Metal Stud Wall Plate with Electrical Knockouts - Creation Networks\"\u003e\n\u003cp\u003eThe WSP445 is engineered specifically for masonry and concrete block installations where through-wall bolting is required to achieve a structurally adequate anchor point. The plate mounts on the opposite side of the wall from the display mount by bolting through the wall surface, distributing load across the backing plate and providing the structural support that a single anchor into a hollow concrete block cannot achieve alone.\u003c\/p\u003e\n\u003cp\u003eWith a maximum load capacity of 150 lb, the WSP445 handles the demands of large-format commercial flat-panel displays in environments such as healthcare facilities, hotels, and institutional buildings where masonry construction is common. The plate is compatible with stud centers of 16\", 20\", and 24\", offering flexibility to align with the framing spacing found in metal stud construction. Electrical knockouts are included in the plate design to allow power and signal cables to be routed cleanly through the wall without separate penetration hardware.\u003c\/p\u003e\n\u003cp\u003eAt 25.7\" wide and 12.2\" tall, the WSP445 provides a wide load-distribution footprint suited to heavier display applications. The 14.80 lb steel construction reflects the structural demands of its intended use. It is compatible with Peerless-AV wall mount TV mounting brackets and carries a 5-year limited warranty, consistent with Peerless-AV's commercial AV product standards.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned as a through-wall backing plate for concrete block and cinder block installations where standard front-wall anchoring is insufficient.\u003c\/li\u003e\n  \u003cli\u003e150 lb maximum load capacity supports large-format flat-panel commercial displays in demanding masonry environments.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 16\", 20\", and 24\" stud center spacings to accommodate varying metal stud framing layouts.\u003c\/li\u003e\n  \u003cli\u003eElectrical knockouts built into the plate allow clean power and signal cable routing through the wall.\u003c\/li\u003e\n  \u003cli\u003eSteel construction at 25.7\" wide and 12.2\" tall provides a broad load-distribution footprint.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Peerless-AV wall mount TV mounting bracket systems for integrated installation.\u003c\/li\u003e\n  \u003cli\u003eManufactured in the United States with a 5-year limited warranty for long-term commercial deployment.\u003c\/li\u003e\n  \u003cli\u003eBlack finish integrates cleanly with standard commercial wall mount hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice Supported\u003c\/td\u003e\n\u003ctd\u003eFlat Panel Display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Load Capacity\u003c\/td\u003e\n\u003ctd\u003e150 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStud Center Compatibility\u003c\/td\u003e\n\u003ctd\u003e16\", 20\", 24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e12.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e25.7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e1.8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e14.80 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5-Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Peerless-AV","offers":[{"title":"Default Title","offer_id":43322386153708,"sku":"WSP445","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-double-metal-stud-wall-plate-w-electrical-knockouts-16-20-24-centers-wsp445-creation-networks-73708.jpg?v=1757899832"},{"product_id":"peerless-av-double-metal-stud-wall-plate-for-sa-sp-pa-pp-730-and-740-products-wsp700","title":"Peerless-AV WSP700 – Double Metal Stud Wall Plate for 730\/740 Series Mounts","description":"\u003ch2\u003eWSP700 – Double Metal Stud Wall Plate for SA\/SP\/PA\/PP 730 and 740 Series Mounts\u003c\/h2\u003e\n\u003cp\u003eThe Peerless-AV WSP700 is a universal double metal stud wall plate that expands mounting flexibility for the 730 and 740 series of Peerless-AV single stud pivot and articulating arms, eliminating dependence on standard stud spacing.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-double-metal-stud-wall-plate-for-sasppapp-730-and-740-products-wsp700-creation-networks-71771.jpg?v=1757899833\" alt=\"Peerless-AV WSP700 – Double Metal Stud Wall Plate for 730\/740 Series Mounts - Creation Networks\"\u003e\n\u003cp\u003eThe WSP700 wall plate addresses one of the most common challenges in commercial AV installation: the restriction of display positioning to wherever the wall studs happen to be. By spanning multiple studs, the WSP700 allows the installer to position the display practically anywhere along the width of the wall without being constrained by stud spacing gaps.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard wood stud applications, the WSP700 is engineered for use with metal stud wall construction — a common structural choice in commercial buildings, offices, and educational facilities. The plate bridges across two studs, distributing load and providing a stable, rigid attachment surface for the mount arm above.\u003c\/p\u003e\n\u003cp\u003eThe WSP700 features a sleeker, lower-profile design than earlier Peerless-AV wall plate models, reducing visual bulk on the wall. Its open construction also improves access to the wall cavity for cable routing, keeping wiring organized and out of sight. The plate supports a maximum load capacity of 80 lb and is compatible with the SA730P, SA740P, SP730P, SP740P, PA730, PA740, PP730, and PP740 mount arms. RoHS certified and backed by a 5-year limited warranty.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for metal stud wall construction, enabling secure display mounting in commercial environments.\u003c\/li\u003e\n\u003cli\u003eSpans two studs to allow display positioning independent of fixed stud spacing locations.\u003c\/li\u003e\n\u003cli\u003eMaximum load capacity of 80 lb supports a broad range of mid-size commercial displays.\u003c\/li\u003e\n\u003cli\u003eSleeker, lower-profile design compared to previous Peerless-AV wall plate models.\u003c\/li\u003e\n\u003cli\u003eOpen-construction design provides improved access to the wall cavity for cable management.\u003c\/li\u003e\n\u003cli\u003eCompatible with SA730P, SA740P, SP730P, SP740P, PA730, PA740, PP730, and PP740 mount arms.\u003c\/li\u003e\n\u003cli\u003eRoHS certified for environmentally compliant installations.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty. Dimensions: 10.3\" H x 19\" W x 1.2\" D.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eWSP700\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Load Capacity\u003c\/td\u003e\n\u003ctd\u003e80 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e10.3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e1.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e6 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Arms\u003c\/td\u003e\n\u003ctd\u003eSA730P, SA740P, SP730P, SP740P, PA730, PA740, PP730, PP740\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental Certification\u003c\/td\u003e\n\u003ctd\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Peerless-AV","offers":[{"title":"Default Title","offer_id":43322386186476,"sku":"WSP700","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-double-metal-stud-wall-plate-for-sasppapp-730-and-740-products-wsp700-creation-networks-71771.jpg?v=1757899833"},{"product_id":"peerless-av-triple-metal-stud-wall-plate-for-pla-series-16-stud-centers-wsp716","title":"Peerless-AV WSP716 – Triple Metal Stud Wall Plate for PLA Series, 16\" Centers","description":"\u003ch2\u003eWSP716 – Peerless-AV Triple Metal Stud Wall Plate for PLA Series\u003c\/h2\u003e\n\u003cp\u003eThe Peerless-AV WSP716 is a triple metal stud wall plate designed for use with Peerless PLA series TV wall mounts in metal stud wall construction, providing a code-appropriate attachment solution where wood studs are not available.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-wsp716-triple-metal-stud-wall-plate-for-pla-series-16-stud-centers-creation-networks-98109.jpg?v=1757899834\" alt='Peerless-AV WSP716 – Triple Metal Stud Wall Plate for PLA Series, 16\" Centers - Creation Networks'\u003e\n\u003cp\u003eMetal stud wall construction is standard in commercial buildings, tenant improvements, and many institutional environments — but standard TV wall mounts are typically designed for wood stud attachment. The WSP716 bridges this gap by providing a dedicated wall plate that spans three metal studs at 16\" centers and uses special togglers for a secure connection to the metal stud framing.\u003c\/p\u003e\n\u003cp\u003eFabricated from 12-gauge cold-rolled steel, the WSP716 delivers the structural rigidity required for heavy commercial displays without adding unnecessary bulk to the installation. Integrated cable management ports allow signal and power cables to be routed cleanly through the wall, supporting a finished, professional appearance in corporate and public-facing environments.\u003c\/p\u003e\n\u003cp\u003eThe plate ships with 1\/4-20 x 1\/2\" screws and washers for attachment of the Peerless PLA series mount, so all necessary hardware for completing the wall-side installation is included. For integrators and facilities teams working with metal stud construction, the WSP716 is a straightforward, code-appropriate solution that keeps the PLA series mount performing as intended. Available from Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\/collections\/peerless-av\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for metal stud wall construction at 16\" stud centers, providing a secure attachment where wood studs are not available.\u003c\/li\u003e\n\u003cli\u003eSpans three metal studs simultaneously, distributing the display load across multiple structural members for improved stability.\u003c\/li\u003e\n\u003cli\u003eSpecial togglers included for attachment to metal stud framing without requiring additional anchoring hardware.\u003c\/li\u003e\n\u003cli\u003e12-gauge cold-rolled steel construction provides the rigidity and load capacity required for commercial display installations.\u003c\/li\u003e\n\u003cli\u003eIntegrated cable management ports allow signal and power cables to pass cleanly through the wall for a finished appearance.\u003c\/li\u003e\n\u003cli\u003eCompatible with Peerless PLA series TV wall mounts; includes 1\/4-20 x 1\/2\" screws and washers for mount attachment.\u003c\/li\u003e\n\u003cli\u003eAll necessary wall and mount attachment hardware is included in the box, simplifying procurement for installers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eWSP716\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mount Series\u003c\/td\u003e\n\u003ctd\u003ePeerless PLA Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Construction Type\u003c\/td\u003e\n\u003ctd\u003eMetal Stud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStud Centers (Supported)\u003c\/td\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Studs Spanned\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e12-Gauge Cold-Rolled Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttachment Hardware Included\u003c\/td\u003e\n\u003ctd\u003eSpecial Togglers, 1\/4-20 x 1\/2\" Screws and Washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Management\u003c\/td\u003e\n\u003ctd\u003eIntegrated Cable Management Ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003ePeerless-AV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Peerless-AV","offers":[{"title":"Default Title","offer_id":43322386219244,"sku":"WSP716","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-wsp716-triple-metal-stud-wall-plate-for-pla-series-16-stud-centers-creation-networks-98109.jpg?v=1757899834"},{"product_id":"peerless-av-triple-metal-stud-wall-plate-for-pla-series-16-20-24-stud-centers-wsp724","title":"Peerless-AV WSP724 – Triple Metal Stud Wall Plate for PLA Series, 16\/20\/24 In Centers","description":"\u003ch2\u003eWSP724 – Triple Metal Stud Wall Plate for PLA Series Mounts, 16\/20\/24 In Stud Centers\u003c\/h2\u003e\n\u003cp\u003eThe Peerless-AV WSP724 is a triple metal stud wall plate constructed from 12-gauge cold-rolled steel that spans three metal stud centers at 16-, 20-, or 24-inch spacing, providing a high-strength attachment base for Peerless-AV PLA series flat panel wall mounts with integrated cable management ports.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-wsp724-triple-metal-stud-wall-plate-for-pla-series-16-20-24-stud-centers-creation-networks-71370.jpg?v=1757899834\" alt=\"Peerless-AV WSP724 – Triple Metal Stud Wall Plate for PLA Series, 16\/20\/24 In Centers - Creation Networks\"\u003e\n\u003cp\u003eThe WSP724 is engineered to solve one of the most common challenges in commercial flat panel installation: attaching a heavy display mount securely to a metal stud wall when stud spacing and display placement do not naturally align. By spanning three metal studs, the WSP724 provides a substantially larger and more rigid attachment footprint than a standard single-stud bracket, which is especially important for large displays where leverage and dynamic load — from adjustment or accidental impact — place higher demands on the wall attachment.\u003c\/p\u003e\n\u003cp\u003eThe plate uses special togglers designed specifically for metal stud wall attachment, along with 1\/4-20 x 1\/2-inch screws and washers to secure Peerless-AV PLA series TV wall mounts directly to the plate. The 12-gauge cold-rolled steel construction provides the rigidity and load distribution needed for confident installation in commercial environments, while the cable management ports built into the plate give installers dedicated pathways for routing HDMI, DisplayPort, and control cabling without additional wall penetrations.\u003c\/p\u003e\n\u003cp\u003eWith more than 40 years of experience in the mounting industry, Peerless-AV engineered the WSP724 to address both structural performance and installation practicality in equal measure. The result is a wall plate that professional AV integrators can specify confidently for large-format display installations on metal stud walls in offices, conference rooms, retail environments, and educational facilities.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTriple metal stud design spans three studs at 16-, 20-, or 24-inch centers for a wide, high-strength attachment footprint.\u003c\/li\u003e\n\u003cli\u003e12-gauge cold-rolled steel construction provides the structural rigidity required for large display installations.\u003c\/li\u003e\n\u003cli\u003eCompatible with Peerless-AV PLA series TV wall mounts using included 1\/4-20 x 1\/2-inch screws and washers.\u003c\/li\u003e\n\u003cli\u003eSpecial togglers for metal stud attachment are included for a complete, hardware-ready installation.\u003c\/li\u003e\n\u003cli\u003eIntegrated cable management ports provide organized routing for signal and control cabling through the wall.\u003c\/li\u003e\n\u003cli\u003eCovers all three standard commercial metal stud spacings: 16, 20, and 24 inches on center.\u003c\/li\u003e\n\u003cli\u003eAllows PLA series mounts to be positioned independently of stud layout for optimal display placement.\u003c\/li\u003e\n\u003cli\u003eDesigned for commercial AV installations in offices, conference rooms, retail, and institutional settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eWSP724\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Type\u003c\/td\u003e\n\u003ctd\u003eMetal stud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStud Spacing Compatibility\u003c\/td\u003e\n\u003ctd\u003e16 in, 20 in, 24 in on center\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStud Count Spanned\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e12-gauge cold-rolled steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mounts\u003c\/td\u003e\n\u003ctd\u003ePeerless-AV PLA series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttachment Hardware Included\u003c\/td\u003e\n\u003ctd\u003eSpecial metal stud togglers, 1\/4-20 x 1\/2 in screws, washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Management\u003c\/td\u003e\n\u003ctd\u003eYes (integrated ports)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003ePeerless-AV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eWSP724\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Peerless-AV","offers":[{"title":"Default Title","offer_id":43322386383084,"sku":"WSP724","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-wsp724-triple-metal-stud-wall-plate-for-pla-series-16-20-24-stud-centers-creation-networks-71370.jpg?v=1757899834"},{"product_id":"peerless-av-metal-stud-double-stud-wall-plate-for-sa752-sa761-sa763-sa771-wsp756","title":"Peerless-AV WSP756 – Double Metal Stud Wall Plate for SA752, SA761, SA763 \u0026 SA771","description":"\u003ch2\u003eWSP756 – Double Metal Stud Wall Plate for SA752, SA761, SA763 \u0026amp; SA771\u003c\/h2\u003e\n\u003cp\u003eThe Peerless-AV WSP756 is a double metal stud wall plate in gloss black that increases load capacity for large Peerless-AV pivot and articulating mounts on 16-, 20-, and 24-inch metal stud walls, providing flexible display placement regardless of stud spacing.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-metal-stud-double-stud-wall-plate-for-sa752sa761sa763-and-sa771-wsp756-creation-networks-11316.jpg?v=1757899835\" alt=\"Peerless-AV WSP756 – Double Metal Stud Wall Plate for SA752, SA761, SA763 \u0026amp; SA771 - Creation Networks\"\u003e\n\u003cp\u003eMetal stud construction is standard in commercial interior walls, but it presents a specific challenge for large display mounts: the load must be distributed across the available stud framing, and the stud spacing may not line up with a desired display location. The WSP756 addresses this by spanning two metal studs simultaneously, distributing the structural load across a wider attachment footprint while allowing the display to be positioned almost anywhere along the wall surface.\u003c\/p\u003e\n\u003cp\u003eThe plate is compatible with 16-, 20-, and 24-inch metal stud spacings, covering the three standard commercial stud centers used in most office, retail, and institutional interiors. Its gloss black finish is both functional and visually neutral, designed to remain unobtrusive against typical commercial wall finishes. The open spacing of the plate is intentionally designed to maximize cable management options, providing multiple paths for routing HDMI, DisplayPort, power, and control cabling through the wall without requiring additional conduit or surface raceways.\u003c\/p\u003e\n\u003cp\u003eThe WSP756 is specifically compatible with Peerless-AV's SA752, SA761, SA763, and SA771 large pivot and articulating mounts. Specifying the WSP756 alongside one of these mounts allows the integrator to position large displays at any horizontal location on a metal stud wall — a meaningful advantage in spaces where architectural constraints would otherwise force a compromise on display placement.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpans two metal studs to increase the load capacity and structural support for large Peerless-AV pivot and articulating mounts.\u003c\/li\u003e\n\u003cli\u003eCompatible with SA752, SA761, SA763, and SA771 large wall mount models.\u003c\/li\u003e\n\u003cli\u003eSupports 16-inch, 20-inch, and 24-inch metal stud center spacings for broad commercial wall compatibility.\u003c\/li\u003e\n\u003cli\u003eAllows large displays to be positioned at virtually any horizontal location on a metal stud wall regardless of stud layout.\u003c\/li\u003e\n\u003cli\u003eOpen plate spacing provides multiple cable routing paths for signal, power, and control cabling through the wall cavity.\u003c\/li\u003e\n\u003cli\u003eGloss black finish provides a clean, unobtrusive appearance against standard commercial wall finishes.\u003c\/li\u003e\n\u003cli\u003eEngineered for professional AV installations in commercial offices, retail spaces, and institutional environments.\u003c\/li\u003e\n\u003cli\u003eSold as a complete wall plate ready for installation with the compatible Peerless-AV mount series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eWSP756\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Type\u003c\/td\u003e\n\u003ctd\u003eMetal stud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStud Spacing Compatibility\u003c\/td\u003e\n\u003ctd\u003e16 in, 20 in, 24 in on center\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mounts\u003c\/td\u003e\n\u003ctd\u003eSA752, SA761, SA763, SA771\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Management\u003c\/td\u003e\n\u003ctd\u003eYes (open plate spacing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003ePeerless-AV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eWSP756\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Peerless-AV","offers":[{"title":"Default Title","offer_id":43322386415852,"sku":"WSP756","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-metal-stud-double-stud-wall-plate-for-sa752sa761sa763-and-sa771-wsp756-creation-networks-11316.jpg?v=1757899835"},{"product_id":"peerless-av-metal-stud-wall-plate-for-sp-850-and-fps-1000-wall-mounts-wsp824","title":"Peerless-AV WSP824 – Metal Stud Wall Plate for SP-850 and FPS-1000 Wall Mounts","description":"\u003ch2\u003eWSP824 – Metal Stud Wall Plate for SP-850 and FPS-1000 Wall Mounts\u003c\/h2\u003e\n\u003cp\u003eThe Peerless-AV WSP824 is a white powder-coated metal stud wall plate designed to distribute the structural load of SP-850 and FPS-1000 wall mounts evenly across metal stud framing, providing the additional wall support required for secure large-format display installations in metal-framed construction.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-metal-stud-wall-plate-for-sp-850-and-fps-1000-wall-mounts-wsp824-creation-networks-95666.jpg?v=1757899837\" alt=\"Peerless-AV WSP824 – Metal Stud Wall Plate for SP-850 and FPS-1000 Wall Mounts - Creation Networks\"\u003e\n\u003cp\u003eMetal stud wall construction is common in commercial buildings, but standard mounting approaches designed for wood studs can create point-load issues when attaching heavy display mounts to metal framing. The WSP824 is the correct accessory to address this: it spans across metal studs and distributes the weight load evenly between them, preventing the localized stress that can cause mounting failures or wall damage over time.\u003c\/p\u003e\n\u003cp\u003eSpecifically designed for use with the Peerless-AV SP-850 and FPS-1000 wall mounts, the WSP824 ensures that these mounts perform as intended in metal stud installations. The white powder-coat finish gives the plate a professional appearance that coordinates with standard commercial interior finishes.\u003c\/p\u003e\n\u003cp\u003eFor AV integrators and installers working in commercial buildings with metal stud framing, the WSP824 is the appropriate companion accessory to specify alongside SP-850 and FPS-1000 mounts. It removes the guesswork from metal stud installations and ensures the structural integrity of the completed display mounting system.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for use with Peerless-AV SP-850 and FPS-1000 wall mounts in metal stud construction.\u003c\/li\u003e\n  \u003cli\u003eDistributes the weight load evenly between metal studs, preventing localized stress on the framing.\u003c\/li\u003e\n  \u003cli\u003eProvides the additional wall support required for secure display mounting in metal-framed commercial buildings.\u003c\/li\u003e\n  \u003cli\u003eWhite powder-coat finish coordinates with standard commercial interior wall finishes.\u003c\/li\u003e\n  \u003cli\u003eSteel construction delivers the structural integrity required for long-term commercial display installations.\u003c\/li\u003e\n  \u003cli\u003ePurpose-built accessory eliminates the need for improvised solutions in metal stud environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eWSP824\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePowder-coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mounts\u003c\/td\u003e\n\u003ctd\u003eSP-850, FPS-1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Type\u003c\/td\u003e\n\u003ctd\u003eMetal stud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eEven weight load distribution between metal studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Peerless-AV","offers":[{"title":"Default Title","offer_id":43322386448620,"sku":"WSP824","price":106.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-metal-stud-wall-plate-for-sp-850-and-fps-1000-wall-mounts-wsp824-creation-networks-95666.jpg?v=1757899837"},{"product_id":"peerless-av-menu-board-wall-plate-8-0-acc-mb0800","title":"Peerless-AV ACC-MB0800 Menu Board Wall Plate – 8.0\"","description":"\u003ch2\u003eACC-MB0800 – Peerless-AV 8.0\" Menu Board Wall Plate\u003c\/h2\u003e\n\u003cp\u003eThe Peerless-AV ACC-MB0800 is the narrowest plate in the ACC menu board wall plate series at 8.0\", providing a precise incremental mounting width addition for Peerless-AV DS-MBZ series menu board mount systems in quick service restaurant digital signage installations.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-menu-board-wall-plate-8-0-acc-mb0800-creation-networks-28731.jpg?v=1757899861\" alt='Peerless-AV ACC-MB0800 Menu Board Wall Plate – 8.0\" - Creation Networks'\u003e\n\u003cp\u003eThe ACC-MB0800 is the smallest individual accessory wall plate available in the Peerless-AV ACC series, spanning just 8.0\" to allow for fine-grained control over total mounting width when combined with larger plates or the base DS-MBZ menu board mount system. This makes it particularly valuable in multi-plate configurations where the required total width lands between the coverage provided by the mid and wide plates alone.\u003c\/p\u003e\n\u003cp\u003eDespite its narrow profile, the ACC-MB0800 shares the same 100 lb load capacity and 48\" screen compatibility as the wider plates in the series, and its open wall plate design reduces interference with the mounting wall surface — an important consideration in installations with irregular wall construction or existing wall hardware. It connects to the DS-MBZ642L, DS-MBZ647L, and DS-MBZ647P base mount systems and integrates with the other ACC wall plate sizes to form a seamless horizontal mounting surface.\u003c\/p\u003e\n\u003cp\u003eFor AV integrators managing tight mounting width specifications in QSR digital menu board projects, the ACC-MB0800 serves as a precision spacer plate that rounds out multi-plate assemblies to the exact width required. It is sold as an individual accessory; base menu board mounts are sold separately.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8.0\" width — the smallest increment in the Peerless-AV ACC menu board wall plate series.\u003c\/li\u003e\n\u003cli\u003eSustains up to 100 lb maximum load capacity consistent with the full ACC plate series.\u003c\/li\u003e\n\u003cli\u003eCompatible with 48\" displays in combination with DS-MBZ series base menu board mounts.\u003c\/li\u003e\n\u003cli\u003eOpen wall plate design reduces interference with wall surface hardware or irregular wall conditions.\u003c\/li\u003e\n\u003cli\u003eCompatible with DS-MBZ642L, DS-MBZ647L, and DS-MBZ647P menu board mount models.\u003c\/li\u003e\n\u003cli\u003eCombines with 22.0\", 35.0\", and 38.75\" ACC plates to achieve precise custom mounting widths.\u003c\/li\u003e\n\u003cli\u003eDesigned for quick service restaurant digital menu board installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eACC-MB0800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Plate Width\u003c\/td\u003e\n\u003ctd\u003e8.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Load Capacity\u003c\/td\u003e\n\u003ctd\u003e100 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Screen Size\u003c\/td\u003e\n\u003ctd\u003e48\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mount Models\u003c\/td\u003e\n\u003ctd\u003eDS-MBZ642L, DS-MBZ647L, DS-MBZ647P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Plate Design\u003c\/td\u003e\n\u003ctd\u003eOpen (reduces wall interference)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Plate Widths (Series)\u003c\/td\u003e\n\u003ctd\u003e8.00\", 22.0\", 35.0\", 38.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eQuick Service Restaurant Menu Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Peerless-AV","offers":[{"title":"Default Title","offer_id":43322387595500,"sku":"ACC-MB0800","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-menu-board-wall-plate-8-0-acc-mb0800-creation-networks-28731.jpg?v=1757899861"},{"product_id":"peerless-av-menu-board-wall-plate-22-0-acc-mb2200","title":"Peerless-AV ACC-MB2200 Menu Board Wall Plate – 22.0\"","description":"\u003ch2\u003eACC-MB2200 – Peerless-AV 22.0\" Menu Board Wall Plate\u003c\/h2\u003e\n\u003cp\u003eThe Peerless-AV ACC-MB2200 is a 22.0\" accessory wall plate for Peerless-AV menu board mount systems, designed to extend mounting surface width in quick service restaurant digital signage installations where a moderate horizontal expansion is needed for up to 38.8\" screen compatibility.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-menu-board-wall-plate-22-0-acc-mb2200-creation-networks-53432.jpg?v=1757899862\" alt='Peerless-AV ACC-MB2200 Menu Board Wall Plate – 22.0\" - Creation Networks'\u003e\n\u003cp\u003eThe ACC-MB2200 occupies the mid-range position in the Peerless-AV ACC wall plate series, providing 22.0\" of mounting width expansion for DS-MBZ642L, DS-MBZ647L, and DS-MBZ647P menu board mount systems. While the 38.75\" and 35.0\" plates address wider display configurations, the 22.0\" option suits installations where a more incremental width increase is required — for instance, when adding a smaller supplemental display to an existing menu board assembly, or when the available wall space limits total mounting width.\u003c\/p\u003e\n\u003cp\u003eThe ACC-MB2200 is rated for a maximum load capacity of 100 lb and supports screen sizes up to 38.8\" in the context of this plate width. Like all plates in the ACC series, it connects to the base menu board mount and adjacent wall plates to form a continuous, seamless mounting surface — a key requirement for professional QSR menu board installations where aesthetics and structural integrity both matter.\u003c\/p\u003e\n\u003cp\u003eFor AV integrators building or expanding Peerless-AV menu board systems, the ACC-MB2200 can be specified alongside the 8.00\", 35.0\", and 38.75\" plate options to achieve custom total mounting widths. Compatible with the DS-MBZ series base mounts (sold separately).\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e22.0\" wall plate width for moderate mounting surface expansion in QSR menu board systems.\u003c\/li\u003e\n\u003cli\u003eSupports up to 100 lb maximum load capacity for secure commercial display mounting.\u003c\/li\u003e\n\u003cli\u003eRated for screen size compatibility up to 38.8\" within this plate configuration.\u003c\/li\u003e\n\u003cli\u003eCompatible with DS-MBZ642L, DS-MBZ647L, and DS-MBZ647P menu board mount models.\u003c\/li\u003e\n\u003cli\u003eConnects with other ACC wall plates (8.00\", 35.0\", 38.75\") to build custom total mounting widths.\u003c\/li\u003e\n\u003cli\u003eCreates a seamless, continuous mounting surface with adjacent plates in multi-plate configurations.\u003c\/li\u003e\n\u003cli\u003eDesigned for quick service restaurant digital menu board installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eACC-MB2200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Plate Width\u003c\/td\u003e\n\u003ctd\u003e22.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Load Capacity\u003c\/td\u003e\n\u003ctd\u003e100 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Screen Size\u003c\/td\u003e\n\u003ctd\u003eUp to 38.8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mount Models\u003c\/td\u003e\n\u003ctd\u003eDS-MBZ642L, DS-MBZ647L, DS-MBZ647P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Plate Widths (Series)\u003c\/td\u003e\n\u003ctd\u003e8.00\", 22.0\", 35.0\", 38.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eQuick Service Restaurant Menu Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Peerless-AV","offers":[{"title":"Default Title","offer_id":43322387628268,"sku":"ACC-MB2200","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-menu-board-wall-plate-22-0-acc-mb2200-creation-networks-53432.jpg?v=1757899862"},{"product_id":"peerless-av-menu-board-wall-plate-35-0-acc-mb3500","title":"Peerless-AV ACC-MB3500 Menu Board Wall Plate – 35.0\"","description":"\u003ch2\u003eACC-MB3500 – Peerless-AV 35.0\" Menu Board Wall Plate\u003c\/h2\u003e\n\u003cp\u003eThe Peerless-AV ACC-MB3500 is a 35.0\" accessory wall plate that widens the mounting surface of compatible Peerless-AV menu board systems, giving installers a mid-range width option for quick service restaurant digital menu board configurations requiring a 100 lb-rated, 48\"-compatible mounting surface.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-menu-board-wall-plate-35-0-acc-mb3500-creation-networks-68743.jpg?v=1757899863\" alt='Peerless-AV ACC-MB3500 Menu Board Wall Plate – 35.0\" - Creation Networks'\u003e\n\u003cp\u003eThe ACC-MB3500 sits within the Peerless-AV modular menu board wall plate accessory system as the 35.0\" width option, bridging the gap between the 22.0\" mid-size plate and the maximum 38.75\" plate. This makes it a practical choice in QSR installations where the standard DS-MBZ642L, DS-MBZ647L, or DS-MBZ647P base mount system requires a specific horizontal extension to support a particular display width without extending to the full 38.75\" plate.\u003c\/p\u003e\n\u003cp\u003eThe plate is designed for a seamless visual connection to the base menu board mount and other ACC wall plates, creating a continuous mounting surface across the back of the display installation. It sustains a maximum load capacity of 100 lb and is rated for 48\" screen compatibility, consistent with other plates in the ACC series.\u003c\/p\u003e\n\u003cp\u003eFor integrators specifying multi-display QSR menu board systems, the ACC-MB3500 can be combined with plates of other widths to achieve precise total mounting widths. Its compatibility with the DS-MBZ series mounts makes it a straightforward specification for commercial AV integrators building or expanding digital menu board installations.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e35.0\" wall plate width for targeted expansion of DS-MBZ series menu board mount systems.\u003c\/li\u003e\n\u003cli\u003eSustains a maximum load capacity of 100 lb for secure commercial display mounting.\u003c\/li\u003e\n\u003cli\u003eRated for compatibility with 48\" screens in combination with Peerless-AV menu board mounts.\u003c\/li\u003e\n\u003cli\u003eCompatible with DS-MBZ642L, DS-MBZ647L, and DS-MBZ647P menu board mount models.\u003c\/li\u003e\n\u003cli\u003ePairs with other ACC wall plates (8.00\", 22.0\", 38.75\") to build custom total mounting widths.\u003c\/li\u003e\n\u003cli\u003eCreates a seamless, continuous mounting surface across multi-plate menu board configurations.\u003c\/li\u003e\n\u003cli\u003eDesigned for quick service restaurant digital menu board installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eACC-MB3500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Plate Width\u003c\/td\u003e\n\u003ctd\u003e35.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Load Capacity\u003c\/td\u003e\n\u003ctd\u003e100 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Screen Size\u003c\/td\u003e\n\u003ctd\u003e48\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mount Models\u003c\/td\u003e\n\u003ctd\u003eDS-MBZ642L, DS-MBZ647L, DS-MBZ647P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Plate Widths (Series)\u003c\/td\u003e\n\u003ctd\u003e8.00\", 22.0\", 35.0\", 38.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eQuick Service Restaurant Menu Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Peerless-AV","offers":[{"title":"Default Title","offer_id":43322387890412,"sku":"ACC-MB3500","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-menu-board-wall-plate-35-0-acc-mb3500-creation-networks-68743.jpg?v=1757899863"},{"product_id":"peerless-av-menu-board-wall-plate-38-75-acc-mb3875","title":"Peerless-AV ACC-MB3875 Menu Board Wall Plate – 38.75\"","description":"\u003ch2\u003eACC-MB3875 – Peerless-AV 38.75\" Menu Board Wall Plate\u003c\/h2\u003e\n\u003cp\u003eThe Peerless-AV ACC-MB3875 is a 38.75\" accessory wall plate that expands the mounting surface width of compatible Peerless-AV menu board mount systems, enabling installers to achieve the exact horizontal span needed for large-format quick service restaurant digital menu board displays.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-menu-board-wall-plate-38-75-acc-mb3875-creation-networks-49716.jpg?v=1757899864\" alt='Peerless-AV ACC-MB3875 Menu Board Wall Plate – 38.75\" - Creation Networks'\u003e\n\u003cp\u003eThe ACC-MB3875 is the widest individual wall plate accessory in the Peerless-AV menu board mounting range, spanning 38.75\" to provide maximum horizontal coverage when combined with DS-MBZ642L, DS-MBZ647L, or DS-MBZ647P menu board mount systems. By connecting multiple accessory wall plates, installers can build a continuous mounting surface that accommodates large or multi-display menu board configurations without visible gaps between panels.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for quick service restaurant (QSR) environments, this wall plate handles the installation demands of high-traffic commercial spaces where both structural security and a consistent finished appearance are required. The plate supports a maximum display weight of 100 lb and is rated for compatibility with 48\" screens, making it well-suited for the large-format commercial displays commonly used in QSR menu board applications.\u003c\/p\u003e\n\u003cp\u003eThe modular nature of the ACC wall plate series means this 38.75\" plate can be combined with smaller plate options (8.00\" through 35.0\") to create custom mounting widths tailored to specific display arrays. When specified alongside compatible Peerless-AV menu board mounts, the ACC-MB3875 provides a straightforward, professionally finished solution for digital menu board deployments.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e38.75\" width — the widest individual plate in the Peerless-AV ACC menu board wall plate range.\u003c\/li\u003e\n\u003cli\u003eExpands menu board mount system width for compatibility with larger displays or multi-screen arrays.\u003c\/li\u003e\n\u003cli\u003eSupports up to 100 lb maximum load capacity for secure commercial display mounting.\u003c\/li\u003e\n\u003cli\u003eCompatible with 48\" displays in conjunction with Peerless-AV menu board mount systems.\u003c\/li\u003e\n\u003cli\u003eCompatible with DS-MBZ642L, DS-MBZ647L, and DS-MBZ647P menu board mount models.\u003c\/li\u003e\n\u003cli\u003eConnects with other ACC wall plates (8.00\"–35.0\") to achieve custom mounting widths.\u003c\/li\u003e\n\u003cli\u003eDesigned for quick service restaurant digital menu board installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eACC-MB3875\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Plate Width\u003c\/td\u003e\n\u003ctd\u003e38.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Load Capacity\u003c\/td\u003e\n\u003ctd\u003e100 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Screen Size\u003c\/td\u003e\n\u003ctd\u003e48\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mount Models\u003c\/td\u003e\n\u003ctd\u003eDS-MBZ642L, DS-MBZ647L, DS-MBZ647P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Plate Widths (Series)\u003c\/td\u003e\n\u003ctd\u003e8.00\", 22.0\", 35.0\", 38.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eQuick Service Restaurant Menu Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Peerless-AV","offers":[{"title":"Default Title","offer_id":43322388021484,"sku":"ACC-MB3875","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/peerless-av-menu-board-wall-plate-38-75-acc-mb3875-creation-networks-49716.jpg?v=1757899864"},{"product_id":"amx-pr-wp-412-precis-4x1-2-4k60-windowing-processor","title":"AMX PR-WP-412 – Precis 4x1+2 Wallplate Switcher","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AMX PR-WP-412 is a dual-mode wallplate switcher that operates as both a 4x1+1 4K60 windowing processor and a 4x2 matrix switcher, designed for conference room AV installations that need multiple HDMI sources composited or switched to a single display. It delivers 4K60 4:4:4 HDMI 2.0 video with HDCP 2.2 and integrates through an open control API, making it a flexible 4K presentation switcher for table or wall mounting.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-pr-wp-412-precis-4x1-2-4k60-windowing-processor-creation-networks-13402.jpg\" alt=\"AMX PR-WP-412 – Precis 4x1+2 Wallplate Switcher - Creation Networks\" width=\"400\" height=\"400\"\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe PR-WP-412 handles four HDMI inputs and, in windowing mode, composites up to four freely scalable windows onto mirrored outputs; in matrix mode it operates as a 4x2 switcher with clean source transitions. It supports HDR10 in matrix mode and full 4K60 4:4:4 signal handling, so critical-viewing environments such as courtrooms and command spaces retain full display fidelity. Audio pass-through and de-embedding allow independent audio routing in all modes. Control is available over IP and RS-232 through an open API, an HTML5 web interface, and front-panel buttons, so the unit can run standalone or under an AMX NetLinx control system. Paired with the AMX UVC1-4K USB capture device, it lets multiple sources be shared simultaneously into Zoom and Microsoft Teams room systems.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual operating modes\u003c\/strong\u003e — Functions as a 4x1+1 windowing processor or a 4x2 matrix switcher from one device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K60 4:4:4 HDMI 2.0\u003c\/strong\u003e — Full-bandwidth video for high-fidelity display applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDR10 support (matrix mode)\u003c\/strong\u003e — Maintains high dynamic range on capable displays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.2 compliant\u003c\/strong\u003e — Passes protected 4K content without handshake faults.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-window compositing\u003c\/strong\u003e — Up to four scalable windows on a single output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio breakaway\u003c\/strong\u003e — Independent audio de-embedding and routing in every mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen control API\u003c\/strong\u003e — IP, RS-232, HTML5 web GUI, and front-panel control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB firmware upgrade path\u003c\/strong\u003e — H-Control ready via firmware update.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference room single-display source switching and compositing\u003c\/li\u003e\n\u003cli\u003eBoardroom multi-source presentation\u003c\/li\u003e\n\u003cli\u003eGovernment and courtroom critical-viewing spaces\u003c\/li\u003e\n\u003cli\u003eTraining room source sharing\u003c\/li\u003e\n\u003cli\u003eHuddle room paired with a soft-codec system (Zoom or Teams)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating modes\u003c\/td\u003e\n\u003ctd\u003e4x1+1 windowing processor \/ 4x2 matrix switcher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0, 4K60 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDR\u003c\/td\u003e\n\u003ctd\u003eHDR10 (matrix mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e4 × HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e2 × HDMI (mirrored in windowing mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio\u003c\/td\u003e\n\u003ctd\u003ePass-through and de-embedding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eOpen API (IP, RS-232), HTML5 web GUI, front panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eH-Control upgradable via USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAMX-PR-WP-412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the PR-WP-412 need a separate control processor?\u003c\/strong\u003e\u003cbr\u003eNo. It runs standalone via its HTML5 web GUI, front panel, or open API over IP and RS-232, and can also be driven by an AMX NetLinx control system where one is present.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it display several sources on one screen at once?\u003c\/strong\u003e\u003cbr\u003eYes. Windowing mode composites up to four freely scalable windows onto the output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with Zoom or Microsoft Teams room systems?\u003c\/strong\u003e\u003cbr\u003eYes, when paired with the AMX UVC1-4K USB capture device, which allows multiple sources to feed a soft-codec platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e\u003cbr\u003eIt uses a wallplate form factor intended for table or in-wall installation within the room.\u003c\/p\u003e","brand":"AMX","offers":[{"title":"Default Title","offer_id":43322690863340,"sku":"AMX-PR-WP-412","price":3770.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-pr-wp-412-precis-4x1-2-4k60-windowing-processor-creation-networks-13402.jpg?v=1757900241"},{"product_id":"amx-dx-tx-dwp-4k-bl-dxlink-4k-hdmi-decor-style-wallplate-transmitte-black","title":"AMX DX-TX-DWP-4K-BL – DXLink 4K HDMI Decora Wallplate Transmitter (Black)","description":"\u003ch2\u003eAMX DX-TX-DWP-4K-BL – DXLink 4K HDMI Decora Wallplate Transmitter (Black)\u003c\/h2\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AMX DX-TX-DWP-4K-BL is a black Decora-style wallplate DXLink transmitter for 4K HDMI source input, transmitting 4K HDMI\/HDCP video, audio, and bidirectional control over standard Cat cable to DXLink 4K receivers at distances up to 100 m. Designed for conference table and wall-mount source locations in commercial AV environments requiring 4K-capable HDMI input.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe AMX DX-TX-DWP-4K-BL is a 4K UHD HDMI DXLink Decora-style wallplate transmitter in black, designed for clean, low-profile installation at table or wall locations in conference rooms. It accepts a 4K HDMI source and transmits the signal over a single twisted pair cable to a compatible DXLink receiver at the display endpoint, extending the signal up to 100 meters. The wallplate form factor installs in a standard single-gang Decora opening, providing a professional, finished appearance while eliminating visible cables or outboard hardware at the connection point.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K HDMI Decora Wallplate TX (Black):\u003c\/strong\u003e 4K HDMI source input in a Decora-style wallplate faceplate for conference tables and wall locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDXLink Cat Cable Transport:\u003c\/strong\u003e Transmits 4K HDMI, audio, and control over Cat cable up to 100 m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP Compliance:\u003c\/strong\u003e End-to-end 4K content protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eDecora wallplate (black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003e4K HDMI with HDCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDXLink Cat cable — up to 100 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eBidirectional over Cat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"AMX","offers":[{"title":"Default Title","offer_id":43322691387628,"sku":"FG1010-330-BLFX","price":841.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-dx-tx-dwp-4k-bl-dxlink-4k-hdmi-decor-style-wallplate-transmitter-black-creation-networks-19133.jpg?v=1757900262"},{"product_id":"amx-dx-tx-dwp-4k-wh-dxlink-4k-hdmi-decor-style-wallplate-transmitte-white","title":"AMX DX-TX-DWP-4K-WH – DXLink 4K HDMI Decora Wallplate Transmitter (White)","description":"\u003ch2\u003eAMX DX-TX-DWP-4K-WH – DXLink 4K HDMI Decora Wallplate Transmitter (White)\u003c\/h2\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AMX DX-TX-DWP-4K-WH is a black Decora-style wallplate DXLink transmitter for 4K HDMI source input, transmitting 4K HDMI\/HDCP video, audio, and bidirectional control over standard Cat cable to DXLink 4K receivers at distances up to 100 m. Designed for conference table and wall-mount source locations in commercial AV environments requiring 4K-capable HDMI input.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe AMX DX-TX-DWP-4K-WH is a 4K UHD HDMI DXLink Decora-style wallplate transmitter in white, designed for clean, low-profile installation at table or wall locations in conference rooms. It accepts a 4K HDMI source and transmits the signal over a single twisted pair cable to a compatible DXLink receiver at the display endpoint, extending the signal up to 100 meters. The wallplate form factor installs in a standard single-gang Decora opening, providing a professional, finished appearance while eliminating visible cables or outboard hardware at the connection point.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K HDMI Decora Wallplate TX (White):\u003c\/strong\u003e 4K HDMI source input in a Decora-style white wallplate faceplate for conference tables and wall locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDXLink Cat Cable Transport:\u003c\/strong\u003e Transmits 4K HDMI, audio, and control over Cat cable up to 100 m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP Compliance:\u003c\/strong\u003e End-to-end 4K content protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eDecora wallplate (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003e4K HDMI with HDCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDXLink Cat cable — up to 100 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eBidirectional over Cat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"AMX","offers":[{"title":"Default Title","offer_id":43322691420396,"sku":"FG1010-330-WHFX","price":841.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-dx-tx-dwp-4k-wh-dxlink-4k-hdmi-decor-style-wallplate-transmitter-white-creation-networks-34892.jpg?v=1757900262"},{"product_id":"amx-hpx-n102-eth-r-ethernet-retractable-cable-module-for-hydraport","title":"AMX HPX-N102-ETH-R – HydraPort Retractable Ethernet Cable Module","description":"\u003ch2\u003eAMX HPX-N102-ETH-R – HydraPort Retractable Ethernet Cable Module\u003c\/h2\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-N102-ETH-R is a retractable Ethernet cable module for the AMX HydraPort connectivity enclosure, providing a self-retracting Cat cable connection point at conference table and commercial AV source locations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-N102-ETH-R is a retractable Ethernet cable module for AMX HydraPort tabletop enclosures, providing a retractable Cat 5e\/6 patch cable at the conference table for wired network connectivity. The spring-retract mechanism keeps the cable organized when not in use, and the module installs in a standard HydraPort slot for seamless integration with other table connectivity modules.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetractable Ethernet Cable:\u003c\/strong\u003e Self-retracting RJ-45 Cat cable for clean conference table HydraPort installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Compatible:\u003c\/strong\u003e Installs in HydraPort pop-up and recessed enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eEthernet (RJ-45) retractable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eAMX HydraPort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"AMX","offers":[{"title":"Default Title","offer_id":43322697613548,"sku":"FG552-34","price":376.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-hpx-n102-eth-r-ethernet-retractable-cable-module-for-hydraport-creation-networks-43722.jpg?v=1757900432"},{"product_id":"amx-hpx-n100-rj45-single-rj-45-module-for-hydraport","title":"AMX HPX-N100-RJ45 – HydraPort Single RJ45 Network Module","description":"\u003ch2\u003eAMX HPX-N100-RJ45 – HydraPort Single RJ45 Network Module\u003c\/h2\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-N100-RJ45 is a hydraport single rj45 network module for the AMX HydraPort architectural connectivity enclosure system, providing the specified connectivity at conference table and commercial AV surface locations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-N100-RJ45 is a single RJ-45 Ethernet module for AMX HydraPort tabletop enclosures, providing a single fixed Ethernet port at the conference table for wired network connectivity. It installs in a standard HydraPort module slot, enabling laptop and AV device network access directly from the meeting table enclosure in commercial conference room deployments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Single RJ45 Network Module:\u003c\/strong\u003e Adds the specified connection type to HydraPort enclosure installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Compatible:\u003c\/strong\u003e Installs in AMX HydraPort pop-up and recessed enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eHydraPort Single RJ45 Network Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eAMX HydraPort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"AMX","offers":[{"title":"Default Title","offer_id":43322697842924,"sku":"FG553-01","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-hpx-n100-rj45-single-rj-45-module-for-hydraport-creation-networks-37510.jpg?v=1757900437"},{"product_id":"amx-hpx-n102-rj45-dual-rj-45-module-for-hydraport","title":"AMX HPX-N102-RJ45 – HydraPort Dual RJ45 Network Module","description":"\u003ch2\u003eAMX HPX-N102-RJ45 – HydraPort Dual RJ45 Network Module\u003c\/h2\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-N102-RJ45 is a hydraport dual rj45 network module for the AMX HydraPort architectural connectivity enclosure system, providing the specified connectivity at conference table and commercial AV surface locations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-N102-RJ45 is a dual RJ-45 Ethernet module for AMX HydraPort tabletop enclosures, providing two fixed Ethernet ports at the conference table for wired network connectivity. It installs in a standard HydraPort module slot, enabling laptop and AV device network access directly from the meeting table enclosure in commercial conference room deployments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Dual RJ45 Network Module:\u003c\/strong\u003e Adds the specified connection type to HydraPort enclosure installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Compatible:\u003c\/strong\u003e Installs in AMX HydraPort pop-up and recessed enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eHydraPort Dual RJ45 Network Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eAMX HydraPort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"AMX","offers":[{"title":"Default Title","offer_id":43322697875692,"sku":"FG553-02","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-hpx-n102-rj45-dual-rj-45-module-for-hydraport-creation-networks-22412.jpg?v=1757900437"},{"product_id":"amx-hpx-n100-usb-single-usb-device-module-for-hydraport","title":"AMX HPX-N100-USB – HydraPort Single USB Device Module","description":"\u003ch2\u003eAMX HPX-N100-USB – HydraPort Single USB Device Module\u003c\/h2\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-N100-USB is a hydraport single usb device module for the AMX HydraPort architectural connectivity enclosure system, providing the specified connectivity at conference table and commercial AV surface locations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-N100-USB is a single USB device module for AMX HydraPort tabletop enclosures, providing a USB-A connection for device charging or data connectivity at the conference table. It installs in a standard HydraPort module slot for integration with other table connectivity modules in commercial meeting and boardroom environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Single USB Device Module:\u003c\/strong\u003e Adds the specified connection type to HydraPort enclosure installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Compatible:\u003c\/strong\u003e Installs in AMX HydraPort pop-up and recessed enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eHydraPort Single USB Device Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eAMX HydraPort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"AMX","offers":[{"title":"Default Title","offer_id":43322697908460,"sku":"FG553-11","price":83.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-hpx-n100-usb-single-usb-device-module-for-hydraport-creation-networks-16594.jpg?v=1757900439"},{"product_id":"amx-hpx-n102-usb-dual-usb-device-module-for-hydraport","title":"AMX HPX-N102-USB – HydraPort Dual USB Device Module","description":"\u003ch2\u003eAMX HPX-N102-USB – HydraPort Dual USB Device Module\u003c\/h2\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-N102-USB is a hydraport dual usb device module for the AMX HydraPort architectural connectivity enclosure system, providing the specified connectivity at conference table and commercial AV surface locations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThis module drops into a slot of an AMX HydraPort tabletop or recessed enclosure to present two USB device ports at the table surface, giving users a clean, built-in point to connect peripherals or pass USB data into the room's AV system. As part of the modular HydraPort architecture, it lets integrators configure exactly the mix of connectivity a conference table needs and add or change ports later without replacing the enclosure.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Dual USB Device Module:\u003c\/strong\u003e Adds the specified connection type to HydraPort enclosure installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Compatible:\u003c\/strong\u003e Installs in AMX HydraPort pop-up and recessed enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eHydraPort Dual USB Device Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eAMX HydraPort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"AMX","offers":[{"title":"Default Title","offer_id":43322697973996,"sku":"FG553-12","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-hpx-n102-usb-dual-usb-device-module-for-hydraport-creation-networks-79968.jpg?v=1757900439"},{"product_id":"amx-hpx-n102-usb-pc-dual-usb-charging-module-for-hydraport","title":"AMX HPX-N102-USB-PC – HydraPort Dual USB Charging Module","description":"\u003ch2\u003eAMX HPX-N102-USB-PC – HydraPort Dual USB Charging Module\u003c\/h2\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-N102-USB-PC is a dual USB charging module for the AMX HydraPort connectivity enclosure, providing two USB-A charging ports at conference table source locations for device charging in commercial AV environments.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-N102-USB-PC is a dual USB charging module for AMX HydraPort tabletop enclosures, supplying USB power for mobile device charging directly at the conference table. It installs in a standard HydraPort module slot and delivers USB charging capability for smartphones, tablets, and accessories in commercial meeting and boardroom environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual USB-A Charging:\u003c\/strong\u003e Two USB charging ports at HydraPort conference table locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Compatible:\u003c\/strong\u003e Installs in HydraPort enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorts\u003c\/td\u003e\n\u003ctd\u003e2x USB-A charging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eAMX HydraPort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"AMX","offers":[{"title":"Default Title","offer_id":43322698006764,"sku":"FG553-13","price":272.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-hpx-n102-usb-pc-dual-usb-charging-module-for-hydraport-creation-networks-98539.jpg?v=1757900440"},{"product_id":"amx-hpx-u100-btn-single-button-module-for-hydraport","title":"AMX HPX-U100-BTN – HydraPort Single Button Control Module","description":"\u003ch2\u003eAMX HPX-U100-BTN – HydraPort Single Button Control Module\u003c\/h2\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-U100-BTN is a hydraport single button control module for the AMX HydraPort architectural connectivity enclosure system, providing the specified connectivity at conference table and commercial AV surface locations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-U100-BTN is a single-button control module for AMX HydraPort tabletop enclosures, providing physical button input for room automation directly from the conference table. It installs in a standard HydraPort module slot and connects to an AMX NetLinx NX controller for button-triggered control of AV sources, displays, and room systems.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Single Button Control Module:\u003c\/strong\u003e Adds the specified connection type to HydraPort enclosure installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Compatible:\u003c\/strong\u003e Installs in AMX HydraPort pop-up and recessed enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eHydraPort Single Button Control Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eAMX HydraPort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"AMX","offers":[{"title":"Default Title","offer_id":43322698072300,"sku":"FG554-01","price":78.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-hpx-u100-btn-single-button-module-for-hydraport-creation-networks-58715.jpg?v=1757900441"},{"product_id":"amx-hpx-u100-2btn-dual-button-module-for-hydraport","title":"AMX HPX-U100-2BTN – HydraPort Dual Button Control Module","description":"\u003ch2\u003eAMX HPX-U100-2BTN – HydraPort Dual Button Control Module\u003c\/h2\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-U100-2BTN is a hydraport dual button control module for the AMX HydraPort architectural connectivity enclosure system, providing the specified connectivity at conference table and commercial AV surface locations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-U100-2BTN is a dual-button control module for AMX HydraPort tabletop enclosures, providing physical button input for room automation directly from the conference table. It installs in a standard HydraPort module slot and connects to an AMX NetLinx NX controller for button-triggered control of AV sources, displays, and room systems.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Dual Button Control Module:\u003c\/strong\u003e Adds the specified connection type to HydraPort enclosure installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Compatible:\u003c\/strong\u003e Installs in AMX HydraPort pop-up and recessed enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eHydraPort Dual Button Control Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eAMX HydraPort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"AMX","offers":[{"title":"Default Title","offer_id":43322698105068,"sku":"FG554-02","price":170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-hpx-u100-2btn-dual-button-module-for-hydraport-creation-networks-22694.jpg?v=1757900442"},{"product_id":"amx-hpx-b050-1-2m-half-blank-module-for-hydraport","title":"AMX HPX-B050 – HydraPort Half Blank Module (0.5M)","description":"\u003ch2\u003eAMX HPX-B050 – HydraPort Half Blank Module (0.5M)\u003c\/h2\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-B050 is a hydraport half blank module (0.5m) for AMX HydraPort connectivity enclosures, filling unused module slots with a clean, professional blank panel to maintain the appearance of the installation.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe AMX HPX-B050 is a half (0.5M) blank filler module for AMX HydraPort tabletop enclosures, occupying an unused module slot to maintain a clean, finished appearance. Blank modules are used during initial installation or when fewer connectivity modules are needed than the enclosure's total capacity, maintaining a professional, uniform look on the conference table surface.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Half Blank Module (0.5M):\u003c\/strong\u003e Blank panel to fill unused HydraPort module slots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraPort Compatible:\u003c\/strong\u003e For AMX HydraPort enclosure installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHydraPort Half Blank Module (0.5M)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eAMX HydraPort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"AMX","offers":[{"title":"Default Title","offer_id":43322698137836,"sku":"FG558-01","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/amx-hpx-b050-12m-half-blank-module-for-hydraport-creation-networks-66865.jpg?v=1757900450"}],"url":"https:\/\/creationnetworks.net\/collections\/wall-plates-table-boxes.oembed?page=29","provider":"Creation Networks","version":"1.0","type":"link"}