{"title":"TOA Mixer Amplifiers \u0026 Power Amplifiers","description":"\u003cp\u003eTOA mixer amplifiers and power amplifiers for commercial paging, background music and distributed audio — from compact 30 W units to multi-channel 120 W and modular 9000 series frames, with 70 V and 100 V outputs.\u003c\/p\u003e\n\n\u003ch2\u003eSizing the amplifier\u003c\/h2\u003e\u003cp\u003eTotal the wattage tapped across every loudspeaker on the circuit, then add headroom — commonly 20 percent. An amplifier run at its limit distorts under a page, which is exactly when intelligibility matters most.\u003c\/p\u003e\n\u003cp\u003eInput count follows sources, not zones: a microphone, a music player, a telephone page input, a fire alarm interface. Paging priority muting is the feature that makes a page override music automatically, and it is standard on most of this range.\u003c\/p\u003e\n\n\u003ch2\u003eModular versus fixed\u003c\/h2\u003e\u003cp\u003eFixed mixer amplifiers are cheaper and simpler where the input mix will not change. Modular 9000 series frames take input and output cards, which suits installations that will grow or where an unusual input is needed later.\u003c\/p\u003e\n\n\u003ch2\u003eFire alarm interface\u003c\/h2\u003e\u003cp\u003eWhere an amplifier is part of a system that carries emergency messages, the interface to the fire alarm panel is a code matter rather than a preference. Confirm the requirement with the AHJ before specifying — a retrofit to add it is far more expensive than getting it right initially.\u003c\/p\u003e\n\n\u003cp\u003eCreation Networks calculates loads, specifies amplification and commissions distributed audio systems. Call 888-230-3661 or email sales@creationnetworks.net.\u003c\/p\u003e","products":[{"product_id":"toa-electronics-modular-digital-mixer-amplifier-2-x-60w-70v-a-9060dhm2cu","title":"TOA Electronics Modular Digital Mixer\/Amplifier (2 x 60W @ 70V) - A-9060DHM2CU","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe TOA A-9060DHM2CU is a modular digital mixer\/amplifier that pairs dual 60-watt 70V outputs with onboard DSP for multi-zone paging and background music in commercial AV systems. Eight configurable input slots accept TOA 9000- and 900-series plug-in modules, so integrators can build the mic and line configuration a conference room, boardroom, or house of worship requires. PC-based GUI programming keeps setup and ongoing maintenance straightforward. The 2RU chassis fits standard equipment racks for clean integration.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe A-9060DHM2CU combines a matrix mixer, dual-channel digital amplifier, and signal processing in a single rack unit. Its dual-channel DSP provides a 10-band parametric EQ, high- and low-pass filters, bass and treble controls, a compressor, gate, ducker, and delay, with additional DSP available on some modules. The GUI programming interface lets installers configure the device from a PC and upload or download settings over the RS-232 connection, and setup wizards plus a firmware-upgrade utility simplify maintenance. An integrated operating mode runs mixer functions at the same time as paging-matrix activation, which suits multi-zone and telephone paging with prioritized, recallable presets. Automatic mic mixing and ambient noise control help maintain intelligibility as room conditions change. Two RCA unbalanced inputs and outputs handle local sources, and plug-in modules expand connectivity as needed (modules are sold separately). For higher-power siblings and compatible modules, browse the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=TOA+9000+mixer+amplifier\"\u003eTOA 9000-series mixer amplifier range at Creation Networks\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-modular-digital-mixeramplifier-2-x-60w-70v-a-9060dhm2cu-creation-networks-92052.jpg?v=1759135691\" alt=\"TOA A-9060DHM2CU modular digital mixer amplifier\"\u003e\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 60W at 70V\u003c\/strong\u003e — Drives two independent high-impedance zones for flexible multi-room coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-input modular design\u003c\/strong\u003e — Accepts TOA 9000- and 900-series plug-in modules for custom mic and line configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-channel DSP\u003c\/strong\u003e — Includes parametric EQ, filters, compressor, gate, ducker, and delay for precise zone tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGUI programming interface\u003c\/strong\u003e — Allows PC-based configuration with setup wizards and a firmware-upgrade utility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 control\u003c\/strong\u003e — Supports uploading and downloading of settings for fast deployment and maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated operating mode\u003c\/strong\u003e — Runs mixer functions alongside paging-matrix activation for multi-zone and telephone paging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic mic mixing and ambient noise control\u003c\/strong\u003e — Maintains intelligibility as room conditions change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2RU rack-mount chassis\u003c\/strong\u003e — Fits standard equipment racks for clean system integration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e8 (modular)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Power Rating\u003c\/td\u003e\n\u003ctd\u003e2x 60 W at 70 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSP\u003c\/td\u003e\n\u003ctd\u003e10-band parametric EQ, HPF\/LPF, bass\/treble, compressor, gate, ducker, delay (dual channel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio I\/O\u003c\/td\u003e\n\u003ctd\u003e2x RCA unbalanced input, 2x RCA unbalanced output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232; PC GUI programming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Modes\u003c\/td\u003e\n\u003ctd\u003eIntegrated mixer + paging matrix; automatic mic mixing; ambient noise control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack Size\u003c\/td\u003e\n\u003ctd\u003e2 U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModules\u003c\/td\u003e\n\u003ctd\u003e9000- and 900-series plug-in modules (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAre input modules included?\u003c\/strong\u003e No. The A-9060DHM2CU accepts TOA 9000- and 900-series plug-in modules, which are sold separately so you can configure mic and line inputs for your application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support 70V distributed speaker systems?\u003c\/strong\u003e Yes. It provides two 60-watt outputs at 70V for driving high-impedance speaker zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the unit programmed?\u003c\/strong\u003e Configuration is handled through a PC-based GUI over RS-232, with setup wizards and a firmware-upgrade utility for maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it page multiple zones?\u003c\/strong\u003e Yes. The integrated operating mode runs mixer functions alongside paging-matrix activation, with prioritized presets for multi-zone and telephone paging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it fit into an equipment rack?\u003c\/strong\u003e The amplifier uses a 2RU chassis sized for standard 19-inch equipment racks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs warranty and support available?\u003c\/strong\u003e Yes. TOA products carry the manufacturer's warranty; contact Creation Networks for warranty details and integration support.\u003c\/p\u003e","brand":"TOA","offers":[{"title":"Default Title","offer_id":46412506202348,"sku":"A-9060DHM2CU","price":1301.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-modular-digital-mixeramplifier-2-x-60w-70v-a-9060dhm2cu-creation-networks-92052.jpg?v=1759135691"},{"product_id":"toa-electronics-modular-digital-mixer-amplifier-2-x-120w-70v-a-9120dhm2cu","title":"TOA Electronics Modular Digital Mixer\/Amplifier (2 x 120W @ 70V) - A-9120DHM2CU","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe TOA A-9120DHM2CU is a modular digital mixer\/amplifier that pairs dual 120-watt 70V outputs with onboard DSP for multi-zone paging and background music in commercial AV installations. Eight configurable input slots accept TOA 9000- and 900-series plug-in modules, so integrators can build the exact mic and line configuration a conference room, house of worship, or multi-purpose facility requires. PC-based GUI programming keeps setup and ongoing maintenance straightforward.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe A-9120DHM2CU combines a matrix mixer, dual-channel digital amplifier, and signal processing in a single 2RU chassis. Its dual-channel DSP includes a 10-band parametric EQ, high- and low-pass filters, bass and treble controls, a compressor, gate, ducker, and delay, giving installers detailed control over each output zone. The GUI programming interface makes it straightforward to configure the unit from a PC and to upload or download settings over the RS-232 connection, with setup wizards and a firmware-upgrade utility simplifying maintenance. An integrated operating mode lets mixer functions run at the same time as paging-matrix activation, which suits multi-zone and telephone paging with prioritized presets and recallable memory settings. Automatic mic mixing and ambient noise control help maintain consistent intelligibility in changing rooms. Two RCA unbalanced inputs and outputs handle local sources, and plug-in modules expand connectivity as needed (modules are sold separately). For comparable units, browse the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=TOA+mixer+amplifier\"\u003eTOA mixer amplifier selection at Creation Networks\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-modular-digital-mixeramplifier-1x-120w-2570v-a-9120sm2-cu-creation-networks-67619.jpg?v=1759135695\" alt=\"TOA A-9120DHM2CU modular digital mixer amplifier\"\u003e\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 120W at 70V\u003c\/strong\u003e — Drives two independent high-impedance zones for flexible multi-room coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-input modular design\u003c\/strong\u003e — Accepts TOA 9000- and 900-series plug-in modules for custom mic and line configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-channel DSP\u003c\/strong\u003e — Includes parametric EQ, filters, compressor, gate, ducker, and delay for precise zone tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGUI programming interface\u003c\/strong\u003e — Allows PC-based configuration with setup wizards and a firmware-upgrade utility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 control\u003c\/strong\u003e — Supports uploading and downloading of settings for fast deployment and maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated operating mode\u003c\/strong\u003e — Runs mixer functions alongside paging-matrix activation for multi-zone and telephone paging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic mic mixing and ambient noise control\u003c\/strong\u003e — Maintains intelligibility as room conditions change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2RU rack-mount chassis\u003c\/strong\u003e — Fits standard equipment racks for clean system integration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e8 (modular)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Power Rating\u003c\/td\u003e\n\u003ctd\u003e2x 120 W at 70 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSP\u003c\/td\u003e\n\u003ctd\u003e10-band parametric EQ, HPF\/LPF, bass\/treble, compressor, gate, ducker, delay (dual channel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio I\/O\u003c\/td\u003e\n\u003ctd\u003e2x RCA unbalanced input, 2x RCA unbalanced output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232; PC GUI programming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Modes\u003c\/td\u003e\n\u003ctd\u003eIntegrated mixer + paging matrix; automatic mic mixing; ambient noise control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack Size\u003c\/td\u003e\n\u003ctd\u003e2 U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModules\u003c\/td\u003e\n\u003ctd\u003e9000- and 900-series plug-in modules (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAre input modules included?\u003c\/strong\u003e No. The A-9120DHM2CU accepts TOA 9000- and 900-series plug-in modules, which are sold separately so you can configure mic and line inputs for your application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support 70V distributed speaker systems?\u003c\/strong\u003e Yes. It provides two 120-watt outputs at 70V for driving high-impedance speaker zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the unit programmed?\u003c\/strong\u003e Configuration is handled through a PC-based GUI over RS-232, with setup wizards and a firmware-upgrade utility for maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it page multiple zones?\u003c\/strong\u003e Yes. The integrated operating mode runs mixer functions alongside paging-matrix activation, with prioritized presets for multi-zone and telephone paging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it fit into an equipment rack?\u003c\/strong\u003e The amplifier uses a 2RU chassis sized for standard 19-inch equipment racks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs warranty and support available?\u003c\/strong\u003e Yes. TOA products carry the manufacturer's warranty; contact Creation Networks for warranty details and integration support.\u003c\/p\u003e","brand":"TOA","offers":[{"title":"Default Title","offer_id":46412512067820,"sku":"A-9120DHM2CU","price":1585.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-modular-digital-mixeramplifier-1x-120w-2570v-a-9120sm2-cu-creation-networks-67619.jpg?v=1759135695"},{"product_id":"toa-electronics-240w-8-channel-modular-mixer-amplifier-a-9240shm2cu","title":"TOA Electronics 240W 8-Channel Modular Mixer\/Amplifier - A-9240SHM2CU","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe TOA A-9240SHM2CU is a 240-watt modular mixer\/amplifier designed for multi-origin broadcasts and sound reinforcement in commercial AV systems. Configurable for up to eight inputs and eight outputs, it accepts both 9000-series and existing 900-series plug-in modules, letting integrators tailor the input stage to a house of worship, auditorium, or multi-purpose facility. Onboard signal processing and control functions are set directly from the mixer, with settings stored in the unit and recalled from the front panel.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe A-9240SHM2CU pairs a 240-watt power amplifier with a flexible modular mixer in a 2RU chassis, making it a capable core for paging and background-music systems. Because it works with both 9000-series and legacy 900-series input modules, it fits new installations and upgrades to existing TOA infrastructure. The unit carries the signal processing and control functions needed for sound reinforcement, and all parameters are configured through the mixer rather than external hardware. Setup data can be stored inside the unit and recalled using the front-panel keys, which speeds day-to-day operation in shared rooms. Connections include an RCA unbalanced amplifier input, an RCA unbalanced preamp output, and a detachable 3-pin balanced preamp output for feeding additional amplifiers or processors. Its ability to perform individual multi-origin broadcasts suits facilities that route different sources to different zones. For comparable amplifiers, browse the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=TOA+mixer+amplifier\"\u003eTOA mixer amplifier selection at Creation Networks\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-240w-8-channel-modular-mixeramplifier-a-9240shm2cu-creation-networks-82175.jpg?v=1759135699\" alt=\"TOA A-9240SHM2CU 240W modular mixer amplifier\"\u003e\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e240W power amplifier\u003c\/strong\u003e — Drives demanding paging and background-music loads in large facilities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to eight inputs and eight outputs\u003c\/strong\u003e — Configures with modules to match multi-zone and multi-source requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9000- and 900-series module support\u003c\/strong\u003e — Works with new and existing TOA modules for flexible upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard signal processing\u003c\/strong\u003e — Provides the processing and control functions needed for sound reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-panel preset recall\u003c\/strong\u003e — Stores settings inside the unit and recalls them with front-panel keys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-origin broadcast capability\u003c\/strong\u003e — Routes different sources to different zones individually.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced and unbalanced outputs\u003c\/strong\u003e — Includes a detachable 3-pin balanced preamp output for system expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2RU rack-mount chassis\u003c\/strong\u003e — Integrates cleanly into standard equipment racks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e8 (modular)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Power Rating\u003c\/td\u003e\n\u003ctd\u003e240 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio I\/O\u003c\/td\u003e\n\u003ctd\u003e1x RCA unbalanced amplifier input; 1x RCA unbalanced preamp output; 1x 3-pin balanced preamp output (detachable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Support\u003c\/td\u003e\n\u003ctd\u003e9000-series and 900-series plug-in modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePreset Storage\u003c\/td\u003e\n\u003ctd\u003eInternal; recalled from front-panel keys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack Size\u003c\/td\u003e\n\u003ctd\u003e2 U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow many inputs and outputs does it support?\u003c\/strong\u003e The A-9240SHM2CU can be configured for up to eight inputs and eight outputs using TOA plug-in modules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich modules are compatible?\u003c\/strong\u003e It accepts 9000-series modules as well as existing 900-series input modules, supporting both new builds and upgrades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a PC to configure it?\u003c\/strong\u003e No. Parameters are set from the mixer, and settings are stored internally and recalled using the front-panel keys.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it route different sources to different zones?\u003c\/strong\u003e Yes. The amplifier supports individual multi-origin broadcasts for multi-zone systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it fit into a rack?\u003c\/strong\u003e It uses a 2RU chassis sized for standard 19-inch equipment racks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs warranty and support available?\u003c\/strong\u003e Yes. TOA products carry the manufacturer's warranty; contact Creation Networks for warranty details and integration support.\u003c\/p\u003e","brand":"TOA","offers":[{"title":"Default Title","offer_id":46412528419052,"sku":"A-9240SHM2CU","price":1453.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-240w-8-channel-modular-mixeramplifier-a-9240shm2cu-creation-networks-82175.jpg?v=1759135699"},{"product_id":"toa-electronics-single-channel-micro-install-amplifier-av-60s-am","title":"TOA Electronics Single-Channel Micro Install Amplifier - AV-60S-AM","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe TOA AV-60S-AM is a 60 W single-channel Class-D micro amplifier designed for concealed installation in plenum air-handling spaces without an external power adapter. UL 2043-tested and Energy Star 3.0-certified, it fits in boardrooms, conference rooms, and AV signage installations where a full-size rack amplifier would be impractical.\u003c\/p\u003e\u003ch2\u003eDescription\u003c\/h2\u003e\u003cp\u003eThe AV-60S-AM's compact metal chassis (150 × 44 × 156 mm, 1.12 kg) enables flush installation inside ceilings or walls — directly in the air handling space — simplifying wiring and eliminating the need for a dedicated equipment room. A switching power supply accepts 100–240 V AC worldwide, and the Energy Star-rated automatic power save function reduces consumption to under 1 W in standby. Three line inputs are provided: a transformer-balanced terminal block (Line 1), a 3.5 mm stereo jack (Line 2), and RCA jacks (Line 3), each with selectable −10\/−20 dBm sensitivity. Output switches between 70 V (for 70V distributed speaker lines) and 4 Ω (for direct-drive applications). Bass and treble tone controls, a remote volume control port, and clip limiting complete the feature set.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e60 W Class-D output at 70 V or 4 Ω (switch selectable)\u003c\/li\u003e\n\u003cli\u003eUL 2043-rated for plenum\/air-handling space installation — no external enclosure required\u003c\/li\u003e\n\u003cli\u003eEnergy Star 3.0 certified with auto standby (under 1 W in power save mode)\u003c\/li\u003e\n\u003cli\u003eUniversal 100–240 V AC switching power supply\u003c\/li\u003e\n\u003cli\u003e3 line inputs: transformer-balanced terminal block, 3.5 mm TRS, RCA\u003c\/li\u003e\n\u003cli\u003eInput sensitivity selectable −10\/−20 dBm per input\u003c\/li\u003e\n\u003cli\u003eBass ±10 dB at 100 Hz; Treble ±10 dB at 10 kHz tone controls\u003c\/li\u003e\n\u003cli\u003eRemote volume control port (10 kΩ pot)\u003c\/li\u003e\n\u003cli\u003eClip limiter prevents overload distortion\u003c\/li\u003e\n\u003cli\u003eCompact: 150 × 44 × 156 mm, 1.12 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardrooms and executive conference rooms requiring concealed amplification\u003c\/li\u003e\n\u003cli\u003eDigital signage audio in retail and corporate environments\u003c\/li\u003e\n\u003cli\u003eClassroom and training room amplification in plenum ceiling spaces\u003c\/li\u003e\n\u003cli\u003eHotel guestroom or meeting room distributed audio\u003c\/li\u003e\n\u003cli\u003eHealthcare and education facility zone amplification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRated Output\u003c\/th\u003e\n\u003ctd\u003e60 W @ 70 V; 60 W @ 4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Source\u003c\/th\u003e\n\u003ctd\u003e100–240 V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Consumption\u003c\/th\u003e\n\u003ctd\u003eRated: \u0026lt;85 W (70V), \u0026lt;110 W (4Ω) | Idle: \u0026lt;10 W (70V) | Standby: \u0026lt;1 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency Response\u003c\/th\u003e\n\u003ctd\u003e4Ω: 20 Hz – 20 kHz ±3 dB | 70V: 60 Hz – 20 kHz ±3 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTHD+N\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;0.15%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLine Input 1\u003c\/th\u003e\n\u003ctd\u003e−10\/−20 dBm (sel.), 10 kΩ, transformer-balanced, removable terminal block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLine Input 2\u003c\/th\u003e\n\u003ctd\u003e−10\/−20 dBm (sel.), 10 kΩ, unbalanced, 3.5 mm stereo jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLine Input 3\u003c\/th\u003e\n\u003ctd\u003e−10\/−20 dBm (sel.), 10 kΩ, unbalanced, RCA jacks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003eSpeaker, removable terminal block (2P)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTone Control\u003c\/th\u003e\n\u003ctd\u003eBass ±10 dB @ 100 Hz; Treble ±10 dB @ 10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRemote Volume\u003c\/th\u003e\n\u003ctd\u003e10 kΩ external potentiometer port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003e−10 to +40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e150 × 44 × 156 mm (5.90\" × 1.73\" × 6.14\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.12 kg (2.5 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eUL 2043, Energy Star 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the AV-60S-AM require an external AC adapter?\u003c\/strong\u003e\u003cbr\u003eNo. The AV-60S-AM has a built-in switching power supply that accepts 100–240 V AC directly, eliminating the need for a separate adapter or power conditioner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does UL 2043 plenum rating mean for installation?\u003c\/strong\u003e\u003cbr\u003eUL 2043 certification means the AV-60S-AM can be installed directly in air-handling spaces (plenum ceilings) without a separate rated enclosure. This is required by fire code in many commercial building jurisdictions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive 70V distributed speaker lines?\u003c\/strong\u003e\u003cbr\u003eYes. The output switch selects between 70V constant-voltage mode for transformer-tapped distributed speakers and 4Ω direct-drive mode. It is not rated for 100V operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the remote volume control port work?\u003c\/strong\u003e\u003cbr\u003eConnect a standard 10 kΩ potentiometer to the remote volume port to provide wall-panel or desktop level control without accessing the amplifier directly.\u003c\/p\u003e","brand":"TOA","offers":[{"title":"Default Title","offer_id":46412595003628,"sku":"AV-60S-AM","price":511.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-single-channel-micro-install-amplifier-av-60s-am-creation-networks-58267.jpg?v=1757943153"},{"product_id":"toa-electronics-mixer-amplifier-bg-220-cu","title":"TOA BG-220 CU 20 W Mixer Amplifier - 3 Inputs, 25 V \/ 70 V \/ 4 Ω","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe TOA BG-220 CU is a 20 W mixer amplifier designed for background music and general announcement applications in retail, hospitality, office, and light commercial environments. It provides three inputs — one switchable MIC\/LINE balanced input and two unbalanced LINE inputs with RCA jacks — along with simultaneous 25 V, 70 V, and 4 Ω balanced outputs. An MOH\/Zone 2 output enables secondary zone distribution or music-on-hold routing from the same unit.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-mixer-amplifier-bg-220-cu-creation-networks-96503.jpg?v=1757943173\" alt=\"TOA BG-220 CU 20W Mixer Amplifier\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt-in protection circuitry monitors output current and thermal conditions, disabling the output stage if operating temperature exceeds 221°F (105°C) to prevent damage. An auto\/manual mute function with adjustable sensitivity enables the amplifier to mute background music automatically upon receiving a paging signal. Frequency response extends from 50 Hz to 20 kHz with 0.5% or less THD at rated output, and output regulation is less than 2 dB from no load to full load. Order the \u003ca href=\"https:\/\/www.creationnetworks.net\"\u003eTOA BG-220 CU\u003c\/a\u003e from Creation Networks.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e20 W output power\u003c\/li\u003e\n\u003cli\u003e1x MIC\/LINE input (electronically balanced, 600 Ω, switchable) + 2x LINE (unbalanced, 10 kΩ, with RCA jacks)\u003c\/li\u003e\n\u003cli\u003eSimultaneous 25 V, 70 V, and 4 Ω balanced outputs\u003c\/li\u003e\n\u003cli\u003eMOH \/ Zone 2 output via removable terminal block\u003c\/li\u003e\n\u003cli\u003eAuto\/manual mute with adjustable sensitivity for paging override\u003c\/li\u003e\n\u003cli\u003eBuilt-in overload and thermal protection (disables output above 221°F \/ 105°C)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50 Hz – 20 kHz at ≤0.5% THD\u003c\/li\u003e\n\u003cli\u003eOutput regulation: \u0026lt;2 dB (no load to full load)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Output Power\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput 1 (MIC\/LINE)\u003c\/td\u003e\n\u003ctd\u003eElectronically balanced, 600 Ω, switchable, terminal block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput 2 \/ 3 (LINE)\u003c\/td\u003e\n\u003ctd\u003eUnbalanced, 10 kΩ, terminal block + RCA jacks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e25 V, 70 V, 4 Ω balanced (terminal block)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAux Output\u003c\/td\u003e\n\u003ctd\u003eMOH \/ Zone 2, terminal block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e50 Hz – 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD at Rated Output\u003c\/td\u003e\n\u003ctd\u003e0.5% or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Regulation\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;2 dB (no load to full load)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermal Protection Threshold\u003c\/td\u003e\n\u003ctd\u003e221°F (105°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"TOA","offers":[{"title":"Default Title","offer_id":46412678594796,"sku":"BG-220 CU","price":251.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-mixer-amplifier-bg-220-cu-creation-networks-96503.jpg?v=1757943173"},{"product_id":"toa-electronics-mixer-amplifier-240w-class-d-70v-bg-2240d-am","title":"TOA Electronics Mixer Amplifier (240W Class-D 70V) - BG-2240D-AM","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe TOA BG-2240D-AM is a 240 W, 5-input Class-D mixer amplifier built to serve as the front end of a commercial 70V audio system for paging and background music. It combines microphone, line, and telephone inputs with a single-zone 70V output, making it a practical commercial-grade amplifier for distributed speaker installations. Front-panel level controls and rear DIP-switch setup keep configuration straightforward for integrators. It suits retail, office, and hospitality spaces that need reliable paging priority over background music.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe BG-2240D-AM mixes five inputs — a balanced microphone input, a balanced line\/telephone input, two unbalanced line inputs, and stereo RCA line inputs — and amplifies them to a 70V speaker line rated at 240 W into a minimum 21-ohm load. An assignable music-on-hold (MOH) output and automatic or manual mute let paging announcements take priority over background music. Removable terminal-block connectors and rear DIP switches simplify wiring and zone setup, and an external volume remote control input allows level adjustment from the room. The rugged chassis rack-mounts with optional MB-1000 brackets for clean integration into a commercial AV rack. The amplifier ships with five volume-control covers and a full set of terminal-block plugs. Pair it with 70V\/100V speakers and explore more \u003ca href=\"https:\/\/creationnetworks.net\/search?q=TOA+mixer+amplifier\"\u003eTOA mixer amplifiers\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-mixer-amplifier-240w-class-d-70v-bg-2240d-am-creation-networks-53236.jpg?v=1757943183\" alt=\"TOA BG-2240D-AM 240W Class-D mixer amplifier\"\u003e\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e240 W Class-D output\u003c\/strong\u003e — Drives large 70V speaker zones efficiently for paging and background music.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-input mixer\u003c\/strong\u003e — Combines microphone, line, telephone, and RCA sources in one commercial-grade unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaging priority muting\u003c\/strong\u003e — Automatic or manual mute ducks background music for clear announcements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssignable MOH output\u003c\/strong\u003e — Routes any input to a music-on-hold feed for telephone systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIP-switch setup\u003c\/strong\u003e — Rear switches make zone and function configuration quick during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable terminal blocks\u003c\/strong\u003e — Speed up wiring and service in the rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal volume remote\u003c\/strong\u003e — Allows level control from the listening space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack-mountable chassis\u003c\/strong\u003e — Installs cleanly with optional MB-1000 brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Channels\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmplifier Power Rating\u003c\/th\u003e\n\u003ctd\u003e240 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Impedance \/ Voltage\u003c\/th\u003e\n\u003ctd\u003e70 V (21 Ω minimum)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAudio Inputs\u003c\/th\u003e\n\u003ctd\u003e1× balanced mic (3-pin block), 1× balanced line\/telephone (3-pin block), 2× unbalanced line (2-pin block), 2× stereo RCA unbalanced line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMute Function\u003c\/th\u003e\n\u003ctd\u003eAutomatic or manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMOH Output\u003c\/th\u003e\n\u003ctd\u003eInput freely assignable to music-on-hold output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRemote Control\u003c\/th\u003e\n\u003ctd\u003eExternal volume remote control input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectors\u003c\/th\u003e\n\u003ctd\u003eRemovable terminal blocks (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack Mounting\u003c\/th\u003e\n\u003ctd\u003eOptional MB-1000 brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Accessories\u003c\/th\u003e\n\u003ctd\u003e5× volume-control covers, 4× 2-pin plugs, 2× 3-pin plugs, 1× 4-pin plug, 1× 5-pin plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker systems does the BG-2240D-AM support?\u003c\/strong\u003e It drives 70V high-impedance speaker lines rated at 240 W into a minimum 21-ohm load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many sources can I connect?\u003c\/strong\u003e Five inputs accept a balanced microphone, a balanced line\/telephone source, two unbalanced line inputs, and stereo RCA line inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan paging override background music?\u003c\/strong\u003e Yes. Automatic or manual mute lowers background music so announcements are heard clearly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it installed in a rack?\u003c\/strong\u003e The chassis rack-mounts using the optional MB-1000 brackets and uses removable terminal blocks for fast wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support music on hold?\u003c\/strong\u003e Yes. Any input can be assigned to the MOH output for connection to a telephone system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e The amplifier carries the TOA manufacturer warranty; contact Creation Networks for warranty, stock, and AV integration assistance.\u003c\/p\u003e","brand":"TOA","offers":[{"title":"Default Title","offer_id":46412681281772,"sku":"BG-2240D-AM","price":963.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-mixer-amplifier-240w-class-d-70v-bg-2240d-am-creation-networks-53236.jpg?v=1757943183"},{"product_id":"toa-electronics-amplifier-mixer-bg-235-cu","title":"TOA BG-235 CU – 35W Mixer Amplifier with 70V\/100V Output","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eDEAL: On Sale — The TOA BG-235 CU is a 35-watt commercial mixer amplifier designed for background music and public address applications. With three input channels, 4Ω \/ 25V \/ 70V output modes, and front-accessible bass and treble EQ, it provides a compact, versatile solution for small-to-medium installed sound systems in retail, hospitality, and commercial environments.\u003c\/p\u003e\n\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe BG-235 CU outputs 35 watts RMS and supports 4Ω direct-drive as well as 25V and 70V constant-voltage distribution, allowing it to drive either standard low-impedance speakers or distributed ceiling speaker systems on a 25V or 70V line. Three channels of inputs include microphone\/line inputs and two RCA line inputs, connected via terminal block and RCA jacks respectively. Recessed bass and treble tone controls enable quick EQ adjustments without an external equalizer. The chassis is designed for surface or rack-compatible mounting in a commercial AV furniture or equipment rack.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e35W RMS output\u003c\/strong\u003e — Suitable for small-to-medium commercial BGM and PA installations at consistent output levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4Ω \/ 25V \/ 70V output modes\u003c\/strong\u003e — Flexible output topology drives both low-impedance speakers and 70V\/25V distributed speaker lines from a single amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 input channels\u003c\/strong\u003e — Mic\/line inputs via terminal block and dual RCA line inputs for source flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessed bass and treble controls\u003c\/strong\u003e — Front-accessible tone EQ recessed to prevent accidental adjustment in public-facing installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal block connectivity\u003c\/strong\u003e — Screw-terminal speaker and input connections for reliable, permanent wiring in installed systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Power\u003c\/td\u003e\n\u003ctd\u003e35W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Impedance \/ Voltage\u003c\/td\u003e\n\u003ctd\u003e4Ω, 25V, 70V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Channels\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMic\/Line Inputs\u003c\/td\u003e\n\u003ctd\u003eTerminal block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine Inputs\u003c\/td\u003e\n\u003ctd\u003e2 × RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Output\u003c\/td\u003e\n\u003ctd\u003eTerminal block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTone Controls\u003c\/td\u003e\n\u003ctd\u003eBass, Treble (recessed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"TOA","offers":[{"title":"Default Title","offer_id":46412699697388,"sku":"BG-235 CU","price":289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-amplifier-and-mixer-bg-235-cu-creation-networks-76604.jpg?v=1757943185"},{"product_id":"toa-electronics-480w-5-input-amplifier-mixer-bg-2480d-am","title":"TOA Electronics 480W 5 input Amplifier \u0026 Mixer - BG-2480D-AM","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe TOA BG-2480D-AM is a 480-watt, five-input mixer amplifier built for background music and general announcements across large commercial spaces. Its high-efficiency Class-D output drives 70V and 100V distributed speaker lines or 4-ohm low-impedance loads, making it a flexible core for multi-zone paging systems. A compact, lightweight chassis and removable terminal blocks speed installation in a conference room, house of worship, or multi-purpose facility. RCA jacks for Line 2 and Line 3 simplify connecting local sources.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe BG-2480D-AM extends the established TOA BG series with a 480-watt digital amplifier output for larger paging and music zones. It accepts five inputs, including one balanced microphone input, one balanced line\/telephone input, two stereo RCA unbalanced line inputs, and additional unbalanced line inputs, so a single unit can combine paging mics, telephone paging, and background music sources. Automatic or manual mute lets paging take priority over music, and front-panel bass and treble controls tune the system for the room. DIP switches configure music-on-hold output assignment per input, mute behavior, LINE 1\/TEL level, and phantom power on or off. Removable input and output terminal blocks make wiring and service straightforward, and an external remote volume control input supports localized level adjustment. Accessory security covers protect the front volume knobs from accidental changes. For matching speakers and source equipment, browse the \u003ca href=\"https:\/\/creationnetworks.net\/search?q=TOA+mixer+amplifier\"\u003eTOA mixer amplifier range at Creation Networks\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-480w-5-input-amplifier-and-mixer-bg-2480d-am-creation-networks-94186.jpg?v=1757943187\" alt=\"TOA BG-2480D-AM 480W mixer amplifier\"\u003e\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e480W Class-D output\u003c\/strong\u003e — Drives large 70V\/100V distributed zones or 4-ohm loads from a lightweight chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-input mixing\u003c\/strong\u003e — Combines mic, line\/telephone, and stereo RCA sources for paging and background music.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic or manual mute\u003c\/strong\u003e — Gives paging announcements priority over music program.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIP-switch configuration\u003c\/strong\u003e — Sets MOH output assignment, mute, LINE 1\/TEL level, and phantom power per the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass and treble controls\u003c\/strong\u003e — Front-panel tone shaping compensates for room acoustics and source material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable terminal blocks\u003c\/strong\u003e — Detachable input\/output connectors speed wiring and service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote volume input\u003c\/strong\u003e — Supports localized volume control for individual zones.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Power Rating\u003c\/td\u003e\n\u003ctd\u003e480 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad Impedance \/ Voltage\u003c\/td\u003e\n\u003ctd\u003e4 ohm; 70 V (10.5 ohm minimum); 100 V (21 ohm minimum)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Inputs\u003c\/td\u003e\n\u003ctd\u003e1x 3-pin balanced mic input; 1x 3-pin balanced line\/telephone input; 2x stereo RCA unbalanced line input; 2x 2-pin unbalanced line input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Outputs\u003c\/td\u003e\n\u003ctd\u003e1x 3-pin balanced MOH output; 1x 2-pin unbalanced line output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMute\u003c\/td\u003e\n\u003ctd\u003eAutomatic or manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTone Controls\u003c\/td\u003e\n\u003ctd\u003eBass and treble (front panel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDIP Switch Settings\u003c\/td\u003e\n\u003ctd\u003eMOH output assignment per input, mute, LINE 1\/TEL level, phantom power on\/off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Control\u003c\/td\u003e\n\u003ctd\u003eExternal remote volume control input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker systems does the BG-2480D-AM support?\u003c\/strong\u003e It drives 70V and 100V high-impedance distributed lines as well as 4-ohm low-impedance loads, with minimum line impedances of 10.5 ohm at 70V and 21 ohm at 100V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many sources can it mix?\u003c\/strong\u003e Five inputs, including a balanced mic input, a balanced line\/telephone input, two stereo RCA line inputs, and unbalanced line inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support paging priority over music?\u003c\/strong\u003e Yes. Automatic or manual mute lowers background music when a priority page is active.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan phantom power be enabled for a condenser mic?\u003c\/strong\u003e Yes. Phantom power is switched on or off through the DIP switch settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs remote volume control possible?\u003c\/strong\u003e Yes. An external remote volume control input supports localized level adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs warranty and support available?\u003c\/strong\u003e Yes. TOA products carry the manufacturer's warranty; contact Creation Networks for system design and support.\u003c\/p\u003e","brand":"TOA","offers":[{"title":"Default Title","offer_id":46412700451052,"sku":"BG-2480D-AM","price":1268.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/toa-electronics-480w-5-input-amplifier-and-mixer-bg-2480d-am-creation-networks-94186.jpg?v=1757943187"},{"product_id":"toa-electronics-240w-5-channel-modular-mixer-amplifier-a-2240-cu","title":"TOA Electronics 240W 5-Channel Modular Mixer\/Amplifier - A-2240 CU","description":"\u003cp dir=\"auto\"\u003eThe TOA A-2240 CU is a high-performance 240W 5-channel mixer\/power amplifier designed for paging, background music, and distributed audio in commercial, institutional, and public facilities. Part of the A-2000 Series, it combines wide frequency response, low noise, and flexible input mixing in a durable rack-compatible chassis.\u003c\/p\u003e\u003cp dir=\"auto\"\u003eThe A-2240 accepts two electronically balanced microphone inputs (MIC 1 with +21V phantom power), a balanced TEL\/paging input, and two unbalanced AUX inputs via RCA jacks, with automatic priority muting that attenuates AUX channels by -30 dB when a microphone or telephone input is active. Outputs support 70V, 25V, and 4Ω speaker configurations on transformer-isolated screw terminals, plus a separate recording output. Bass and treble tone controls of ±10 dB provide ample range for acoustic correction.\u003c\/p\u003e\u003cp dir=\"auto\"\u003eIdeal for schools, offices, restaurants, shops, factories, houses of worship, and large meeting rooms, the A-2240 CU delivers cost-effective and reliable audio amplification for virtually any installed single-zone paging or BGM application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eBenefit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e240W Rated Output\u003c\/td\u003e\n\u003ctd\u003eDrives high-impedance 70V\/25V lines or 4Ω low-impedance speaker loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 Balanced Mic Inputs + Phantom Power\u003c\/td\u003e\n\u003ctd\u003eConnects dynamic or condenser microphones without additional equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBalanced TEL (Telephone) Input\u003c\/td\u003e\n\u003ctd\u003eIntegrates paging from telephone systems directly into the audio distribution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 Unbalanced AUX Inputs (RCA)\u003c\/td\u003e\n\u003ctd\u003eConnects background music sources, streamers, or media players easily\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePriority Auto-Mute (−30 dB)\u003c\/td\u003e\n\u003ctd\u003eAutomatically ducks BGM when Mic, Mic 2, or TEL input is activated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70V\/25V\/4Ω Speaker Outputs\u003c\/td\u003e\n\u003ctd\u003eSupports diverse speaker line configurations for flexible zone coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecording Output (RCA)\u003c\/td\u003e\n\u003ctd\u003eEnables audio recording or connection to an additional amplifier or booster\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBass\/Treble Tone Controls (±10 dB)\u003c\/td\u003e\n\u003ctd\u003eProvides wide-range equalization to match room acoustics or content type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cp dir=\"auto\"\u003eThe TOA A-2240 CU is the go-to choice for schools and universities needing reliable paging and background music amplification, office buildings and corporate facilities requiring lobby and hallway audio, restaurants and retail stores where BGM with overhead paging is essential, factories and warehouses using multi-source single-zone PA systems, and houses of worship needing high-power music amplification with microphone priority.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Source\u003c\/td\u003e\n\u003ctd\u003e120 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Output\u003c\/td\u003e\n\u003ctd\u003e240 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e238 W (EN60065); 520 W (AC at rated output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e50 – 20,000 Hz (±3 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Harmonic Distortion\u003c\/td\u003e\n\u003ctd\u003e≤1% at 1 kHz, 1\/3 rated power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\/N Ratio\u003c\/td\u003e\n\u003ctd\u003e≥60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMIC 1, 2 Input\u003c\/td\u003e\n\u003ctd\u003e-60 dB, 600 Ω, balanced, M3.5 screw terminal (8.3 mm between barriers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTEL Input\u003c\/td\u003e\n\u003ctd\u003e-10 dB, 10 kΩ, balanced, M3.5 screw terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAUX 1, 2 Input\u003c\/td\u003e\n\u003ctd\u003e-20 dB, 10 kΩ, unbalanced, RCA pin jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Output Impedance\u003c\/td\u003e\n\u003ctd\u003eHigh-Z: 21 Ω (70 V), 2.6 Ω (25 V); Low-Z: 4 Ω (31 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRec Output\u003c\/td\u003e\n\u003ctd\u003e0 dB, 600 Ω, unbalanced, RCA pin jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhantom Power\u003c\/td\u003e\n\u003ctd\u003eDC +21 V (MIC 1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTone Control\u003c\/td\u003e\n\u003ctd\u003eBass: ±10 dB at 100 Hz; Treble: ±10 dB at 10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMuting\u003c\/td\u003e\n\u003ctd\u003eMIC 1, MIC 2, and TEL attenuate AUX 1\/AUX 2 by −30 dB (adjustable threshold)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePanel: ABS resin, black; Case: Steel plate, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W × H × D)\u003c\/td\u003e\n\u003ctd\u003e420 × 100.9 × 360.3 mm (16.54\" × 3.97\" × 14.19\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e15.5 kg (34.17 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the A-2240 support constant-voltage (70V\/25V) speaker systems?\u003c\/strong\u003e Yes — it provides transformer-isolated 70V (21Ω), 25V (2.6Ω), and 4Ω speaker outputs on screw terminals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does the priority mute function work?\u003c\/strong\u003e When MIC 1, MIC 2, or TEL input is activated, it automatically attenuates AUX 1 and AUX 2 by −30 dB. The activation threshold is adjustable for each input channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan it power condenser microphones?\u003c\/strong\u003e Yes — MIC 1 provides DC +21V phantom power, which is switchable on or off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the recording output used for?\u003c\/strong\u003e The RCA recording output (0 dB, 600Ω, unbalanced) can drive an external recording device or serve as a line-level feed to a booster or additional amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the A-2240 rack-mountable?\u003c\/strong\u003e Yes — at 420 mm wide (16.54\"), it fits a standard 19\" rack with appropriate mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TOA","offers":[{"title":"Default Title","offer_id":46787857744108,"sku":"A-2240    CU","price":777.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/1233203637_565722_4a42c605-ef7e-46f5-ad56-8622b49c4b56.jpg?v=1757955294"}],"url":"https:\/\/creationnetworks.net\/collections\/toa-mixer-amplifiers.oembed","provider":"Creation Networks","version":"1.0","type":"link"}