{"title":"RF Venue Wireless Sound Systems","description":"\u003ch1\u003eRF Venue Antenna Combiners \u0026amp; RF Distribution\u003c\/h1\u003e\u003cp\u003eRF Venue designs antenna combiners, band-pass filters, and directional antennas that improve RF reliability for wireless microphone and in-ear monitor systems. Creation Networks stocks the current catalog, including the \u003ca href=\"https:\/\/creationnetworks.net\/products\/audio-technica-4zone-4-zone-antenna-combines-up-to-four-separate-pairs-of-diversity-antenna-connections\"\u003e4ZONE multi-zone antenna combiner\u003c\/a\u003e and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/audio-technica-cpb-directional-uhf-helical-cp-beam-antenna\"\u003eCP Beam directional antenna\u003c\/a\u003e. For SKU selection and pricing, contact us through \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eAntenna Combiners\u003c\/h2\u003e\n\u003cp\u003eCombiners let multiple wireless receivers share a smaller number of antennas, reducing rack space and antenna clutter in multi-channel wireless deployments. In stock: the \u003ca href=\"https:\/\/creationnetworks.net\/products\/audio-technica-2x1split-passive-2x1-rf-splitter-combiner-50-ohm-bnc-female-connectors\"\u003e2X1SPLIT passive splitter\/combiner\u003c\/a\u003e and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/audio-technica-4zone-4-zone-antenna-combines-up-to-four-separate-pairs-of-diversity-antenna-connections\"\u003e4ZONE combiner\u003c\/a\u003e for larger multi-zone systems.\u003c\/p\u003e\n\n\u003ch2\u003eBand-Pass Filters\u003c\/h2\u003e\n\u003cp\u003eBand-pass filters remove out-of-band RF interference before it reaches a wireless microphone receiver's front end, improving dynamic range and reducing dropouts in RF-congested environments. In stock: the \u003ca href=\"https:\/\/creationnetworks.net\/products\/audio-technica-bpf470t530-rf-venue-band-pass-filters-help-eliminate-out-of-band-signals-that-can-saturate-the-front-end-of-wireless-microphone-receivers-designed-for-compatibility-with-the-audio-technica-3000-series-de2-frequency-band-470-530-mhz\"\u003eBPF470T530\u003c\/a\u003e, \u003ca href=\"https:\/\/creationnetworks.net\/products\/audio-technica-bpf470t560-rf-venue-band-pass-filter-470-560-mhz-helps-eliminate-out-of-band-signals-that-can-saturate-the-front-end-of-wireless-microphone-receivers-and-can-greatly-improve-dynamic-range-by-reducing-noise-and-third-party-interference\"\u003eBPF470T560\u003c\/a\u003e, \u003ca href=\"https:\/\/creationnetworks.net\/products\/audio-technica-bpf530t590-rf-venue-band-pass-filters-help-eliminate-out-of-band-signals-that-can-saturate-the-front-end-of-wireless-microphone-receivers-designed-for-compatibility-with-the-audio-technica-3000-series-ee1-frequency-band-530-590-mhz\"\u003eBPF530T590\u003c\/a\u003e, and \u003ca href=\"https:\/\/creationnetworks.net\/products\/audio-technica-bpf560t608-rf-venue-band-pass-filter-560-608-mhz-helps-eliminate-out-of-band-signals-that-can-saturate-the-front-end-of-wireless-microphone-receivers-and-can-greatly-improve-dynamic-range-by-reducing-noise-and-third-party-interference\"\u003eBPF560T608\u003c\/a\u003e, covering different frequency bands to match specific wireless system ranges.\u003c\/p\u003e\n\n\u003ch2\u003eDirectional Antennas\u003c\/h2\u003e\n\u003cp\u003eIn stock: the \u003ca href=\"https:\/\/creationnetworks.net\/products\/audio-technica-cpb-directional-uhf-helical-cp-beam-antenna\"\u003eCP Beam directional circularly-polarized UHF antenna\u003c\/a\u003e, which focuses reception toward the stage or performance area to reduce interference from other directions, and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/audio-technica-d-arc-diversity-architectural-antenna-for-wireless-microphones\"\u003eD-ARC diversity architectural antenna\u003c\/a\u003e, designed to mount flush and blend into a room's architecture.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLive event and rental staging wireless coordination\u003c\/li\u003e\n\u003cli\u003eHouses of worship with multiple wireless channels\u003c\/li\u003e\n\u003cli\u003eBroadcast and corporate event RF coordination\u003c\/li\u003e\n\u003cli\u003ePerforming arts and theaters\u003c\/li\u003e\n\u003cli\u003eSchools and university performance halls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Creation Networks for RF Venue\u003c\/h2\u003e\n\u003cp\u003eWe run frequency coordination and RF planning for wireless systems before installation, specifying combiners, filters, and antennas against your venue's actual RF environment. We handle system design, installation, and ongoing support.\u003c\/p\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Service\",\"name\":\"RF Venue Antenna and RF Distribution Systems\",\"provider\":{\"@type\":\"Organization\",\"name\":\"Creation Networks\",\"url\":\"https:\/\/www.creationnetworks.net\",\"telephone\":\"+1-888-230-3661\"},\"areaServed\":\"US\",\"description\":\"RF Venue antenna combiners, band-pass filters, and directional antennas for wireless microphone and IEM systems.\",\"hasOfferCatalog\":{\"@type\":\"OfferCatalog\",\"name\":\"RF Venue Systems\",\"itemListElement\":[{\"@type\":\"Offer\",\"itemOffered\":{\"@type\":\"Product\",\"name\":\"RF Venue Antenna Combiners\"}},{\"@type\":\"Offer\",\"itemOffered\":{\"@type\":\"Product\",\"name\":\"RF Venue Band-Pass Filters\"}},{\"@type\":\"Offer\",\"itemOffered\":{\"@type\":\"Product\",\"name\":\"RF Venue Directional Antennas\"}}]}}\n\u003c\/script\u003e","products":[{"product_id":"audio-technica-2x1split-passive-2x1-rf-splitter-combiner-50-ohm-bnc-female-connectors","title":"RF Venue 2X1SPLIT – RF Antenna Splitter\/Combiner for Wireless Audio","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue 2X1SPLIT is a passive RF splitter and combiner for wireless microphone and IEM antenna distribution systems. It allows two wireless receiver antenna inputs to share one antenna, or two IEM combiners to connect to a single CP antenna, reducing the number of individual antenna runs required in a multi-channel wireless audio setup.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eIn multi-channel wireless audio systems, antenna management becomes increasingly complex as channel count grows. The 2X1SPLIT simplifies this by allowing a single antenna to serve two receiver antenna inputs, or by combining two diversity zones to feed a single downstream receiver. Common use cases include connecting two wireless mic receivers to a single diversity antenna pair (requiring one 2X1SPLIT per antenna path), combining a 4- or 8-channel IEM combiner output to a single CP antenna, or linking two coverage zones in a distributed wireless system. The 2X1SPLIT is a passive device requiring no power and uses standard BNC connectors for compatibility with all professional wireless audio equipment. Note that combining two receiver inputs onto one antenna will reduce the signal level available to each receiver — for long cable runs or marginal RF environments, an RF Venue ILAMP-ACT in-line amplifier may be needed upstream to compensate.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Design\u003c\/strong\u003e — No power required; installs inline via standard BNC connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Applications\u003c\/strong\u003e — Functions as a splitter or combiner for wireless receivers, IEM combiners, and antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Connectors\u003c\/strong\u003e — Standard professional BNC connections compatible with all wireless audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor\u003c\/strong\u003e — Small enough to mount inline or at a patch panel without dedicated rack space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePassive RF Splitter\/Combiner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410358665452,"sku":"2X1SPLIT","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-2x1split-passive-2x1-rf-splittercombiner-50-ohm-bnc-female-connectors-creation-networks-26086.png?v=1757903208"},{"product_id":"audio-technica-4zone-4-zone-antenna-combines-up-to-four-separate-pairs-of-diversity-antenna-connections","title":"RF Venue 4ZONE – 4-Zone Multi-Zone Antenna Combiner","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue 4ZONE is a 4-zone multi-zone antenna combiner designed for wireless microphone deployments requiring antenna coverage across multiple independent zones. It combines antenna signals from up to four separate coverage areas into a single receiver chain, enabling a wireless microphone system to track talent as they move between different rooms, stage areas, or coverage zones within a venue. The 4ZONE operates across 470–960 MHz and is compatible with all major UHF wireless microphone receivers.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eMulti-zone wireless microphone deployments — a house of worship with a main sanctuary and overflow rooms, a conference center with multiple meeting spaces, or a large venue with multiple stage areas — require antenna infrastructure that can hand off wireless signals from one coverage zone to another. The 4ZONE handles this by accepting antenna inputs from up to four independent antenna positions or zones and combining those signals for distribution to wireless receivers. Receivers see a continuous antenna feed regardless of which zone the transmitter is in, enabling seamless wireless coverage across large, multi-area venues.\u003c\/p\u003e\n\u003cp\u003eThe 4ZONE is designed as a standalone unit without IP network connectivity (for network-enabled control, see the 4ZONE-NETWORK). It provides the core multi-zone RF combining function in a rackmount form factor, compatible with all major UHF wireless microphone receivers across the 470–960 MHz range — covering both the legacy TV whitespace UHF bands and the spectrum used by current professional wireless microphone systems. Compatible antennas for each zone include the Diversity Fin, Diversity Architectural Antenna, RF Spotlight, Diversity Omni, and CP Beam, depending on the coverage requirement of each zone.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rf-venue-4zone-antenna-combiner-for-wireless-mic-receivers-470-960-mhz-creation-networks-42464.png?v=1757903209\" alt=\"RF Venue 4ZONE – 4-Zone Multi-Zone Antenna Combiner - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eThe 4ZONE is well suited for large houses of worship, conference centers, university campuses, government facilities, and any commercial AV environment with a distributed antenna system covering multiple zones.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Zone Antenna Combining\u003c\/strong\u003e — Combines antenna inputs from up to four independent coverage zones into a single receiver chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Frequency Range\u003c\/strong\u003e — Operates across 470–960 MHz, supporting multi-brand UHF wireless microphone deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Room and Multi-Stage Coverage\u003c\/strong\u003e — Enables seamless wireless microphone coverage across multiple rooms, stages, or areas within a venue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRackmount Form Factor\u003c\/strong\u003e — Installs in a standard equipment rack in the AV head-end or equipment room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with all major UHF wireless microphone receivers in the 470–960 MHz range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistributed Antenna System (DAS) Support\u003c\/strong\u003e — Suitable for use in distributed antenna system deployments with antennas throughout a facility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge house of worship with sanctuary, overflow, and auxiliary room coverage\u003c\/li\u003e\n\u003cli\u003eConference center with multiple meeting rooms sharing wireless receiver infrastructure\u003c\/li\u003e\n\u003cli\u003eUniversity and corporate campus wireless audio systems\u003c\/li\u003e\n\u003cli\u003eGovernment facility and auditorium complex multi-zone deployments\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room and commercial meeting space distributed antenna systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Zones\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 independent zones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–960 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRack-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork Connectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone (see 4ZONE-NETWORK for IP control)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the 4ZONE and the 4ZONE-NETWORK?\u003c\/h3\u003e\n\u003cp\u003eThe 4ZONE provides the core 4-zone antenna combining function as a standalone unit without network connectivity. The 4ZONE-NETWORK adds Ethernet\/IP network control for remote monitoring and management. Choose the 4ZONE when network control is not required; choose the 4ZONE-NETWORK for enterprise or large-venue installations where remote system visibility is needed.\u003c\/p\u003e\n\u003ch3\u003eWhat antennas work with each zone input on the 4ZONE?\u003c\/h3\u003e\n\u003cp\u003eAny RF Venue UHF antenna compatible with the 470–960 MHz range can be used per zone, including the Diversity Fin, Diversity Architectural Antenna, RF Spotlight, Diversity Omni, and CP Beam. The choice depends on the coverage requirements of each zone.\u003c\/p\u003e\n\u003ch3\u003eCan the 4ZONE support more than four zones?\u003c\/h3\u003e\n\u003cp\u003eThe 4ZONE supports up to four antenna zones. For systems requiring more than four zones, multiple 4ZONE units may be cascaded. Contact Creation Networks for system design guidance on large multi-zone deployments.\u003c\/p\u003e\n\u003ch3\u003eDoes the 4ZONE work with wireless microphone receivers from different manufacturers?\u003c\/h3\u003e\n\u003cp\u003eYes. The 4ZONE operates across 470–960 MHz and is compatible with UHF wireless microphone receivers from Shure, Sennheiser, Sony, Audio-Technica, and other major brands.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the 4ZONE?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410358730988,"sku":"4ZONE","price":949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rf-venue-4zone-antenna-combiner-for-wireless-mic-receivers-470-960-mhz-creation-networks-42464.png?v=1793683439"},{"product_id":"audio-technica-bpf470t530-rf-venue-band-pass-filters-help-eliminate-out-of-band-signals-that-can-saturate-the-front-end-of-wireless-microphone-receivers-designed-for-compatibility-with-the-audio-technica-3000-series-de2-frequency-band-470-530-mhz","title":"RF Venue BPF470T530 – Band-Pass Filter, 470–530 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue BPF470T530 is a hand-tuned passive band-pass filter for wireless microphone receive systems operating in the 470–530 MHz UHF band. It installs inline on the coaxial antenna feed to block out-of-band RF signals that can saturate receiver front ends and cause intermodulation distortion, desensitization, and performance degradation. Compatible with Shure G50 and G1 band systems and Audio-Technica DE2 band systems, this filter requires no external power and has a minimal 3\" x 1.75\" footprint.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eModern RF environments in commercial venues, urban settings, and arenas are congested with broadcast television signals, cellular transmissions, and other high-power RF sources operating outside the wireless microphone band. Without filtering, these out-of-band signals enter the wireless receiver's front end through the antenna, reducing dynamic range and increasing noise floor — even when those interfering signals are far removed from the target frequency. The BPF470T530 addresses this problem by presenting 40 dB of rejection to signals below 440 MHz and above 557 MHz, protecting the receiver from out-of-band saturation without requiring any active circuitry, software configuration, or power connection.\u003c\/p\u003e\n\u003cp\u003eThe filter connects inline between the antenna or antenna distribution system and the wireless microphone receiver input using standard BNC connectors. Its maximum insertion loss of 3.5 dB is predictable and consistent across the 470–530 MHz pass band, making it easy to compensate with an in-line amplifier on longer cable runs if needed. Two units are required for standard diversity wireless microphone systems — one per antenna input on the receiver. This filter is not suitable for IEM transmit chains or active antenna systems that pass DC bias over the coax.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-Tuned Pass Band\u003c\/strong\u003e — 470–530 MHz pass band precisely tuned to match Shure G50, G1, and Audio-Technica DE2 band allocations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 dB Side Rejection\u003c\/strong\u003e — Blocks out-of-band RF signals that cause receiver saturation, IMD, and dynamic range compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Design\u003c\/strong\u003e — No power required; connects inline via standard BNC connectors with no software or configuration needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Insertion Loss\u003c\/strong\u003e — Maximum 3.5 dB insertion loss across the pass band, predictable and compensable with in-line amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor\u003c\/strong\u003e — 3\" x 1.75\" footprint fits in any rack or cable tray without dedicated mounting hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Operating Temperature\u003c\/strong\u003e — Rated -30 to 70°C for reliable performance in all venue environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship — protecting wireless mic receivers in RF-congested urban environments\u003c\/li\u003e\n\u003cli\u003eAuditorium — filtering antenna feeds in large-scale wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eConference room — reducing intermodulation in multi-channel wireless mic systems\u003c\/li\u003e\n\u003cli\u003eBroadcast studio — isolating specific UHF bands in high-density RF environments\u003c\/li\u003e\n\u003cli\u003eGovernment space — RF management in secure or high-RF-density facilities\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room — inline filtering for touring wireless systems using this frequency band\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePass Band\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–530 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInsertion Loss (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInband Ripple (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVSWR (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSide Rejection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 dB @ DC–440 MHz; 20 dB @ 440–448 \u0026amp; 550–557 MHz; 40 dB @ 557–1000 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Input Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30 to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\" x 1.75\" (7.6 x 4.5 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone (passive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eShure G50, G1; Audio-Technica DE2 band\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need one or two BPF470T530 filters for a diversity wireless system?\u003c\/h3\u003e\n\u003cp\u003eTwo filters are required for a standard diversity wireless microphone receiver — one per antenna input. Each antenna feed must be filtered independently.\u003c\/p\u003e\n\u003ch3\u003eWill the BPF470T530 work with my Shure wireless system?\u003c\/h3\u003e\n\u003cp\u003eThe BPF470T530 is compatible with Shure G50 and G1 band wireless systems that operate within the 470–530 MHz range. Check your specific Shure model's operating frequency before purchasing to confirm compatibility.\u003c\/p\u003e\n\u003ch3\u003eCan I use this filter with an active antenna or antenna distribution system?\u003c\/h3\u003e\n\u003cp\u003eNo. The BPF470T530 does not pass DC bias voltage, which means it cannot be used in-line with active antennas or antenna distribution systems that require DC power over the coaxial cable. It must be placed after the DC path in the signal chain.\u003c\/p\u003e\n\u003ch3\u003eWill the 3.5 dB insertion loss cause signal problems?\u003c\/h3\u003e\n\u003cp\u003eIn most cases, 3.5 dB of insertion loss is acceptable and will not cause performance issues. If you are working with marginal signal levels or long cable runs, adding an RF Venue ILAMP-ACT in-line amplifier (rated at 10 dB of gain) upstream of the filter can compensate for the loss.\u003c\/p\u003e\n\u003ch3\u003eCan this filter be used in an IEM transmit chain?\u003c\/h3\u003e\n\u003cp\u003eNo. Band-pass filters are designed for receive-only applications. Using a filter in an IEM transmit chain will attenuate the transmitted signal and is not recommended.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410380783852,"sku":"BPF470T530","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-bpf470t530-rf-venue-rf-band-pass-filter-470-to-530-mhz-creation-networks-21094.jpg?v=1757903691"},{"product_id":"audio-technica-bpf470t560-rf-venue-band-pass-filter-470-560-mhz-helps-eliminate-out-of-band-signals-that-can-saturate-the-front-end-of-wireless-microphone-receivers-and-can-greatly-improve-dynamic-range-by-reducing-noise-and-third-party-interference","title":"RF Venue BPF470T560 – Band-Pass Filter, 470–560 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue BPF470T560 is a hand-tuned passive band-pass filter for wireless microphone receive systems operating in the 470–560 MHz UHF band. It installs inline on the coaxial antenna feed to block out-of-band RF signals that can saturate receiver front ends and cause intermodulation distortion, desensitization, and performance degradation. Compatible with Shure G50 and H5 band systems, Sennheiser A and A1 band systems, Sennheiser 6000\/9000 Low Band, and Lectrosonics Blocks B19\/B20\/B21, this filter requires no external power and has a minimal footprint that fits any rack or cable tray.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eModern RF environments in commercial venues, urban settings, and arenas are congested with broadcast television signals, cellular transmissions, and other high-power RF sources operating outside the wireless microphone band. Without filtering, these out-of-band signals enter the wireless receiver's front end through the antenna, reducing dynamic range and increasing noise floor — even when those interfering signals are far removed from the target frequency. The BPF470T560 addresses this problem by presenting 40 dB of rejection to signals below 440 MHz and above 592 MHz, protecting the receiver from out-of-band saturation without requiring any active circuitry, software configuration, or power connection.\u003c\/p\u003e\n\u003cp\u003eThe filter connects inline between the antenna or antenna distribution system and the wireless microphone receiver input using standard BNC connectors. Its maximum insertion loss of 3.5 dB is predictable and consistent across the 470–560 MHz pass band, making it easy to compensate with an in-line amplifier on longer cable runs if needed. Two units are required for standard diversity wireless microphone systems — one per antenna input on the receiver. This filter is not suitable for IEM transmit chains or active antenna systems that pass DC bias over the coax.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-Tuned Pass Band\u003c\/strong\u003e — 470–560 MHz pass band precisely tuned to match Shure G50\/H5, Sennheiser A\/A1, Sennheiser 6000\/9000 Low Band, and Lectrosonics B19\/B20\/B21 allocations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 dB Side Rejection\u003c\/strong\u003e — Blocks out-of-band RF signals that cause receiver saturation, IMD, and dynamic range compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Design\u003c\/strong\u003e — No power required; connects inline via standard BNC connectors with no software or configuration needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Insertion Loss\u003c\/strong\u003e — Maximum 3.5 dB insertion loss across the pass band, predictable and compensable with in-line amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor\u003c\/strong\u003e — Small footprint fits in any rack or cable tray without dedicated mounting hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Operating Temperature\u003c\/strong\u003e — Rated -30 to 70°C for reliable performance in all venue environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship — protecting wireless mic receivers in RF-congested urban environments\u003c\/li\u003e\n\u003cli\u003eAuditorium — filtering antenna feeds in large-scale wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eConference room — reducing intermodulation in multi-channel wireless mic systems\u003c\/li\u003e\n\u003cli\u003eBroadcast studio — isolating specific UHF bands in high-density RF environments\u003c\/li\u003e\n\u003cli\u003eGovernment space — RF management in secure or high-RF-density facilities\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room — inline filtering for touring wireless systems using this frequency band\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePass Band\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–560 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInsertion Loss (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInband Ripple (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVSWR (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSide Rejection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 dB @ DC–440 MHz; 20 dB @ 440–449 \u0026amp; 582–592 MHz; 40 dB @ 592–1000 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Input Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30 to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone (passive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eShure G50, H5; Sennheiser A, A1; Sennheiser 6000\/9000 Low Band; Lectrosonics B19\/B20\/B21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need one or two BPF470T560 filters for a diversity wireless system?\u003c\/h3\u003e\n\u003cp\u003eTwo filters are required for a standard diversity wireless microphone receiver — one per antenna input. Each antenna feed must be filtered independently.\u003c\/p\u003e\n\u003ch3\u003eWhich wireless systems is the BPF470T560 compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe BPF470T560 is compatible with Shure G50 and H5 band systems, Sennheiser A and A1 band systems, Sennheiser 6000\/9000 series Low Band configurations, and Lectrosonics Blocks B19, B20, and B21. Verify your specific model's operating frequency falls within 470–560 MHz before purchasing.\u003c\/p\u003e\n\u003ch3\u003eCan I use this filter with an active antenna or antenna distribution system?\u003c\/h3\u003e\n\u003cp\u003eNo. The BPF470T560 does not pass DC bias voltage, which means it cannot be used in-line with active antennas or antenna distribution systems that require DC power over the coaxial cable. It must be placed after the DC path in the signal chain.\u003c\/p\u003e\n\u003ch3\u003eWill the 3.5 dB insertion loss cause signal problems?\u003c\/h3\u003e\n\u003cp\u003eIn most cases, 3.5 dB of insertion loss is acceptable and will not cause performance issues. If you are working with marginal signal levels or long cable runs, adding an RF Venue ILAMP-ACT in-line amplifier (rated at 10 dB of gain) upstream of the filter can compensate for the loss.\u003c\/p\u003e\n\u003ch3\u003eCan this filter be used in an IEM transmit chain?\u003c\/h3\u003e\n\u003cp\u003eNo. Band-pass filters are designed for receive-only applications. Using a filter in an IEM transmit chain will attenuate the transmitted signal and is not recommended.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410380816620,"sku":"BPF470T560","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-bpf470t560-rf-venue-rf-band-pass-filter-470-to-560-mhz-creation-networks-10693.jpg?v=1757903692"},{"product_id":"audio-technica-bpf530t590-rf-venue-band-pass-filters-help-eliminate-out-of-band-signals-that-can-saturate-the-front-end-of-wireless-microphone-receivers-designed-for-compatibility-with-the-audio-technica-3000-series-ee1-frequency-band-530-590-mhz","title":"RF Venue BPF530T590 – Band-Pass Filter, 530–590 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue BPF530T590 is a hand-tuned passive band-pass filter for wireless microphone receive systems operating in the 530–590 MHz UHF band. It installs inline on the coaxial antenna feed to block out-of-band RF signals that can saturate receiver front ends and cause intermodulation distortion, desensitization, and performance degradation. Compatible with Shure H50 band systems and Audio-Technica EE1 band systems, this filter requires no external power and has a minimal footprint that fits any rack or cable tray.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eModern RF environments in commercial venues, urban settings, and arenas are congested with broadcast television signals, cellular transmissions, and other high-power RF sources operating outside the wireless microphone band. Without filtering, these out-of-band signals enter the wireless receiver's front end through the antenna, reducing dynamic range and increasing noise floor — even when those interfering signals are far removed from the target frequency. The BPF530T590 addresses this problem by presenting 40 dB of rejection to signals below 500 MHz and above 619 MHz, protecting the receiver from out-of-band saturation without requiring any active circuitry, software configuration, or power connection.\u003c\/p\u003e\n\u003cp\u003eThe filter connects inline between the antenna or antenna distribution system and the wireless microphone receiver input using standard BNC connectors. Its maximum insertion loss of 3.5 dB is predictable and consistent across the 530–590 MHz pass band, making it easy to compensate with an in-line amplifier on longer cable runs if needed. Two units are required for standard diversity wireless microphone systems — one per antenna input on the receiver. This filter is not suitable for IEM transmit chains or active antenna systems that pass DC bias over the coax.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-Tuned Pass Band\u003c\/strong\u003e — 530–590 MHz pass band precisely tuned to match Shure H50 and Audio-Technica EE1 band allocations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 dB Side Rejection\u003c\/strong\u003e — Blocks out-of-band RF signals that cause receiver saturation, IMD, and dynamic range compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Design\u003c\/strong\u003e — No power required; connects inline via standard BNC connectors with no software or configuration needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Insertion Loss\u003c\/strong\u003e — Maximum 3.5 dB insertion loss across the pass band, predictable and compensable with in-line amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor\u003c\/strong\u003e — Small footprint fits in any rack or cable tray without dedicated mounting hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Operating Temperature\u003c\/strong\u003e — Rated -30 to 70°C for reliable performance in all venue environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship — protecting wireless mic receivers in RF-congested urban environments\u003c\/li\u003e\n\u003cli\u003eAuditorium — filtering antenna feeds in large-scale wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eConference room — reducing intermodulation in multi-channel wireless mic systems\u003c\/li\u003e\n\u003cli\u003eBroadcast studio — isolating specific UHF bands in high-density RF environments\u003c\/li\u003e\n\u003cli\u003eGovernment space — RF management in secure or high-RF-density facilities\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room — inline filtering for touring wireless systems using this frequency band\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePass Band\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e530–590 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInsertion Loss (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInband Ripple (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVSWR (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSide Rejection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 dB @ DC–500 MHz; 20 dB @ 500–508 \u0026amp; 613–619 MHz; 40 dB @ 619–1000 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Input Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30 to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone (passive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eShure H50; Audio-Technica EE1 band\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need one or two BPF530T590 filters for a diversity wireless system?\u003c\/h3\u003e\n\u003cp\u003eTwo filters are required for a standard diversity wireless microphone receiver — one per antenna input. Each antenna feed must be filtered independently.\u003c\/p\u003e\n\u003ch3\u003eWhich wireless systems is the BPF530T590 compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe BPF530T590 is compatible with Shure H50 band systems and Audio-Technica EE1 band systems that operate within the 530–590 MHz range. Verify your specific model's operating frequency before purchasing to confirm compatibility.\u003c\/p\u003e\n\u003ch3\u003eCan I use this filter with an active antenna or antenna distribution system?\u003c\/h3\u003e\n\u003cp\u003eNo. The BPF530T590 does not pass DC bias voltage, which means it cannot be used in-line with active antennas or antenna distribution systems that require DC power over the coaxial cable. It must be placed after the DC path in the signal chain.\u003c\/p\u003e\n\u003ch3\u003eWill the 3.5 dB insertion loss cause signal problems?\u003c\/h3\u003e\n\u003cp\u003eIn most cases, 3.5 dB of insertion loss is acceptable and will not cause performance issues. If you are working with marginal signal levels or long cable runs, adding an RF Venue ILAMP-ACT in-line amplifier (rated at 10 dB of gain) upstream of the filter can compensate for the loss.\u003c\/p\u003e\n\u003ch3\u003eCan this filter be used in an IEM transmit chain?\u003c\/h3\u003e\n\u003cp\u003eNo. Band-pass filters are designed for receive-only applications. Using a filter in an IEM transmit chain will attenuate the transmitted signal and is not recommended.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410380849388,"sku":"BPF530T590","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-bpf530t590-rf-band-pass-filter-530-to-590-mhz-creation-networks-15747.jpg?v=1757903693"},{"product_id":"audio-technica-bpf560t608-rf-venue-band-pass-filter-560-608-mhz-helps-eliminate-out-of-band-signals-that-can-saturate-the-front-end-of-wireless-microphone-receivers-and-can-greatly-improve-dynamic-range-by-reducing-noise-and-third-party-interference","title":"RF Venue BPF560T608 – Band-Pass Filter, 560–608 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue BPF560T608 is a passive UHF band-pass filter designed to improve wireless microphone system performance by attenuating out-of-band RF interference while passing signals in the 560–608 MHz range with minimal insertion loss. Hand-tuned to the specified pass band, it provides 40 dB of rejection below 535 MHz and above 632 MHz, protecting wireless receivers from cellular, public safety, and other UHF transmissions operating outside the licensed wireless mic spectrum.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eIn high-density RF environments — stadiums, convention centers, houses of worship, broadcast facilities — wireless microphone systems are exposed to interference from a wide range of out-of-band RF sources. Cellular LTE and 5G signals, public safety radio, and other licensed services operating adjacent to the wireless mic spectrum can overload receiver front ends and cause dropout, noise, and intermodulation products that degrade system reliability.\u003c\/p\u003e\n\u003cp\u003eThe BPF560T608 addresses this by placing a precision band-pass filter on the antenna feed ahead of the receiver or antenna distribution system. The 560–608 MHz pass band is specifically tuned for systems using Shure J1 and J3 frequency bands, Sennheiser G band, Sennheiser 6000\/9000 High Band configurations, and Lectrosonics Blocks B22 and B23. By restricting the RF signal path to the frequencies actually used by the wireless system, the filter reduces receiver overload and improves dynamic range in congested RF environments.\u003c\/p\u003e\n\u003cp\u003eThe BPF560T608 is entirely passive — no power supply is required — and connects inline via standard BNC connectors. It introduces a maximum of 3.5 dB insertion loss across the pass band, which is typically recovered by the gain of the antenna distribution system. The filter is not compatible with active antennas or IEM transmit paths and should not be placed on transmit antenna feeds.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e560–608 MHz Pass Band\u003c\/strong\u003e — Tuned for Shure J1\/J3, Sennheiser G band and 6000\/9000 High Band, and Lectrosonics B22\/B23 wireless systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 dB Side Rejection\u003c\/strong\u003e — Attenuates signals below 535 MHz and above 632 MHz by 40 dB, blocking cellular, LTE, 5G, and public safety interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum 3.5 dB Insertion Loss\u003c\/strong\u003e — Minimal in-band signal degradation, recovered by distributor gain in most installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Operation\u003c\/strong\u003e — No power required; installs inline on any standard BNC coaxial antenna feed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5 dB Maximum In-Band Ripple\u003c\/strong\u003e — Flat frequency response across the pass band preserves signal integrity for multi-channel wireless systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVSWR ≤ 1.5\u003c\/strong\u003e — Low impedance mismatch for clean signal transfer in 50-ohm antenna systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2W Maximum Power Handling\u003c\/strong\u003e — Suitable for all standard wireless microphone receive antenna applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Connectors\u003c\/strong\u003e — Compatible with standard wireless microphone antenna infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor\u003c\/strong\u003e — 3\" × 1.75\" (7.6 × 4.5 cm); installs directly at the antenna output or at the input of an antenna distribution system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouses of worship using Shure J1, J3, or Sennheiser G band wireless microphone systems in congested urban RF environments.\u003c\/li\u003e\n\u003cli\u003eBroadcast and production facilities operating Sennheiser 6000\/9000 series or Lectrosonics B22\/B23 systems that require isolation from adjacent cellular and public safety spectrum.\u003c\/li\u003e\n\u003cli\u003eTouring and live event systems deployed in markets where out-of-band RF interference degrades wireless receiver performance.\u003c\/li\u003e\n\u003cli\u003eCorporate AV installations with Sennheiser G band or Lectrosonics B-block systems in multi-tenant buildings with dense Wi-Fi and cellular infrastructure.\u003c\/li\u003e\n\u003cli\u003eSports and arena facilities with high RF density where wireless systems operating in the 560–608 MHz range need front-end protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePass Band\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e560–608 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInsertion Loss (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn-Band Ripple (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVSWR (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSide Rejection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 dB @ DC–535 MHz; 20 dB @ 535–543 \u0026amp; 626–632 MHz; 40 dB @ 632–1000 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30 to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\" × 1.75\" (7.6 × 4.5 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone (passive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eShure J1, J3; Sennheiser G band; Sennheiser 6000\/9000 High Band; Lectrosonics B22, B23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNot Compatible With\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eActive antennas; IEM transmit antenna feeds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the 3.5 dB insertion loss affect wireless microphone range?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIn most installed systems, the insertion loss is recovered by the gain of the antenna distribution system (typically 10–12 dB). For passive antenna splits without a distribution amplifier, the insertion loss adds to total cable and splitter loss. RF Venue recommends using the BPF560T608 at the input of an active antenna distributor to offset the filter's insertion loss.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use the BPF560T608 with my active antenna?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. The BPF560T608 is not compatible with active antennas that supply DC power over the coaxial cable. Installing this passive filter between an active antenna and a receiver or distributor will block the DC power path and may damage the antenna or filter. Use the filter on passive antenna feeds only.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this filter compatible with my Sennheiser 6000 or 9000 series system?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, provided your Sennheiser 6000\/9000 system is configured for High Band operation in the 560–608 MHz range. Verify your system's frequency band assignment before purchasing. Sennheiser 6000\/9000 systems can be ordered in multiple frequency bands; confirm your specific band before selecting a filter.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use the BPF560T608 on an IEM transmit antenna?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. Band-pass filters in the BPF series are designed for receive-side antenna feeds only. Placing a filter on a transmit antenna path will attenuate the transmit signal and is not supported. For IEM systems, only use the filter on the receive antenna path if monitoring return signals.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere in the signal chain should I install the BPF560T608?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eInstall the filter as close to the antenna as possible — ideally at the antenna output or at the input of the antenna distribution system. Placing the filter early in the chain prevents out-of-band signals from intermodulating within splitters or distribution amplifiers before they can be rejected.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410380882156,"sku":"BPF560T608","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-bpf560t608-rf-venue-rf-band-pass-filter-560-to-608-mhz-creation-networks-41353.jpg?v=1757903694"},{"product_id":"audio-technica-cpb-directional-uhf-helical-cp-beam-antenna","title":"RF Venue CPB – CP Beam Directional Circularly Polarized UHF Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue CPB is a directional, circularly polarized helical UHF antenna designed for in-ear monitor and wireless microphone applications requiring focused, dropout-free signal delivery. Its helical design transmits and receives signal across all polarization planes simultaneously, making it well suited for IEM transmit applications where performer body pack receivers may be oriented in any direction. Lightweight and collapsible, the CP Beam is equally at home in a permanent installation or as part of a touring production rig.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe CP Beam (CPB) addresses one of the most common causes of IEM and wireless microphone dropout: polarization mismatch. Traditional linearly polarized antennas only effectively transmit or receive signal in one plane (typically vertical). When a performer moves and the receiver's antenna changes orientation, signal strength drops. The CP Beam's helical circular polarization transmits across all planes simultaneously, maintaining signal integrity regardless of body pack orientation.\u003c\/p\u003e\n\u003cp\u003eThe CP Beam is directional, with a focused beam pattern that concentrates RF energy toward the performance area. This directional gain provides better signal strength at distance compared to omnidirectional alternatives, making the CP Beam a strong choice for larger stages, auditoriums, and any venue where antenna-to-performer distance is a concern. For IEM applications, RF Venue recommends pairing the CP Beam with the COMBINE4 (4-channel) or COMBINE6HDR (6-channel) combiner to consolidate multiple IEM transmitter feeds to a single CP Beam antenna. The CP Beam includes an N-BNC adapter and a stand-mount bracket, and collapses for transport or storage. For a complete IEM pack including the COMBINE4 and cable, see the COMB4CPB bundle.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-cpb-directional-uhf-helical-cp-beam-antenna-creation-networks-59915.jpg?v=1757903702\" alt=\"RF Venue CPB – CP Beam Directional Circularly Polarized UHF Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-cpb-directional-uhf-helical-cp-beam-antenna-creation-networks-70293.jpg?v=1757903703\" alt=\"RF Venue CPB – CP Beam Directional Circularly Polarized UHF Antenna - Creation Networks\" style=\"max-width:100%;height:auto;margin-top:12px;\"\u003e\n\u003cp\u003eThe CP Beam is compatible with all major UHF wireless microphone and IEM systems in the 400–800 MHz range. It is also suitable for other UHF communication devices requiring directional circularly polarized antenna performance.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircular Polarization\u003c\/strong\u003e — Helical design transmits and receives across all polarization planes, eliminating dropouts caused by body pack orientation changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Beam Pattern\u003c\/strong\u003e — Focused pattern concentrates RF energy toward the performance area, providing greater effective range than omnidirectional antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight and Collapsible\u003c\/strong\u003e — Folds for transport; fits in a rack drawer or equipment case for touring use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIEM and Wireless Mic Compatible\u003c\/strong\u003e — Suitable for IEM transmit applications (paired with a combiner) and wireless microphone receive applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eN-BNC Adapter Included\u003c\/strong\u003e — Ships with an N-BNC adapter for connection to BNC-terminated coaxial cable runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand-Mount Bracket Included\u003c\/strong\u003e — Mounts on a standard microphone stand or antenna bracket for optimal positioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Frequency Range\u003c\/strong\u003e — Operates across 400–800 MHz covering all major UHF IEM and wireless microphone bands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIEM transmit antenna for houses of worship with multiple IEM channels (paired with COMBINE4 or COMBINE6HDR)\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center IEM and wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eLive event and touring productions requiring directional antenna coverage\u003c\/li\u003e\n\u003cli\u003eBroadcast studio IEM transmit infrastructure\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room and commercial AV wireless antenna installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHelical, circularly polarized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400–800 MHz (UHF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN-type (N-BNC adapter included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded Accessories\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN-BNC adapter, stand-mount bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCollapsible; packout-friendly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF IEM and wireless microphone systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eCan the CP Beam be used for wireless microphone receive as well as IEM transmit?\u003c\/h3\u003e\n\u003cp\u003eYes. The CP Beam is suitable for both IEM transmit and wireless microphone receive applications. Its circular polarization and directional gain benefit both use cases.\u003c\/p\u003e\n\u003ch3\u003eHow many IEM channels can be fed through a single CP Beam?\u003c\/h3\u003e\n\u003cp\u003eRF Venue recommends a maximum of eight IEM transmitters through a single combiner-antenna system. For best performance, combine no more than four channels with the COMBINE4 into a single CP Beam, or up to six channels with the COMBINE6HDR.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the CP Beam and the CP Architectural antenna?\u003c\/h3\u003e\n\u003cp\u003eBoth are circularly polarized UHF antennas. The CP Beam is a directional helical antenna designed for stand-mounting and touring use. The CP Architectural antenna is designed for permanent wall or ceiling mounting with a slim, paintable enclosure for architectural integration.\u003c\/p\u003e\n\u003ch3\u003eDoes the CP Beam come with a cable?\u003c\/h3\u003e\n\u003cp\u003eThe CP Beam includes an N-BNC adapter and stand-mount bracket but does not include a coaxial cable. For a complete IEM pack including a 25-foot cable, see the COMB4CPB bundle.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the CP Beam?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381406444,"sku":"CPB","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-cpb-directional-uhf-helical-cp-beam-antenna-creation-networks-59915.jpg?v=1793683939"},{"product_id":"audio-technica-d-arc-diversity-architectural-antenna-for-wireless-microphones","title":"RF Venue D-ARC – Diversity Architectural Antenna for Wireless Microphones","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue D-ARC is a white Diversity Architectural Antenna designed for permanent wireless microphone installations where both RF performance and aesthetic integration are priorities. Using a patent-pending dual-feed design, the D-ARC provides both A and B diversity antenna outputs from a single slim enclosure — replacing two traditional paddle antennas with one unit that mounts flush against any wall or ceiling and can be painted to match any interior surface. Coverage is a 140-degree conical pattern with typical range to 200 feet.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eTraditional wireless microphone antenna installations use two separate LPDA paddle antennas for A and B diversity. These antennas are visually prominent and difficult to integrate into finished architectural spaces. The D-ARC solves this with a single slim unit that contains both diversity antenna elements in a patent-pending dual-feed configuration, providing both A and B BNC outputs for connection to an antenna distribution system. The result is a single, nearly invisible antenna that installs in the same location where two paddle antennas would otherwise be required.\u003c\/p\u003e\n\u003cp\u003eThe D-ARC's enclosure is slim enough to mount directly on a wall or ceiling using its pre-drilled rear mounting plate, which connects to the front faceplate and is secured with screws. The installation process takes minutes. Once mounted, the antenna can be painted with any non-metallic paint to match the surrounding surface — a unique feature among wireless microphone antennas. The 140-degree conical coverage pattern makes the D-ARC effective when mounted at stage wings, the front of house, or on a ceiling aimed at the performance area. Typical range is 200 feet under standard RF conditions.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-d-arc-diversity-architectural-antenna-for-wireless-microphones-white-470-to-616-mhz-creation-networks-57782.jpg?v=1757903706\" alt=\"RF Venue D-ARC – Diversity Architectural Antenna for Wireless Microphones - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eThe D-ARC is compatible with all major UHF wireless microphone systems from Shure, Sennheiser, Sony, Audio-Technica, and other brands operating in the 470–616 MHz range. For the black finish version, see the D-ARCB. For complete antenna distribution packs including the DISTRO4, see the D-ARCDISTRO4. For packs with the DISTRO5 HDR, see the D-ARCD5.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Feed Diversity Design\u003c\/strong\u003e — Patent-pending dual-feed provides both A and B antenna outputs from a single unit, replacing two traditional paddle antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim Wall\/Ceiling-Mount Profile\u003c\/strong\u003e — Low-profile enclosure mounts flush on walls or ceilings with a pre-drilled rear mounting plate; minimal visual footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable Enclosure\u003c\/strong\u003e — Accepts any non-metallic paint for custom color matching to walls, ceilings, or any architectural surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140° Conical Coverage\u003c\/strong\u003e — Broad pattern effective at stage wings, FOH, or ceiling positions with typical range to 200 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Installation\u003c\/strong\u003e — Rear mounting plate pre-drilled with multiple hole patterns; installs in minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Finish\u003c\/strong\u003e — Suitable for light-colored interiors; black finish available as D-ARCB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with all UHF wireless microphone receivers in the 470–616 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship with permanent wireless microphone installations\u003c\/li\u003e\n\u003cli\u003eConference room and boardroom wireless audio systems\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center productions\u003c\/li\u003e\n\u003cli\u003eGovernment and corporate meeting spaces\u003c\/li\u003e\n\u003cli\u003eTraining room and multi-purpose room AV installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eD-ARC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite (paintable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Design\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual-feed diversity (patent-pending)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e140° conical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 200 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA and B diversity (dual BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–616 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMount Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWall or ceiling (rear mounting plate included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between D-ARC and D-ARCB?\u003c\/h3\u003e\n\u003cp\u003eThe D-ARC is the white finish version; the D-ARCB is functionally identical in black. Both mount the same way and provide the same RF performance. The choice is based on the installation environment's color scheme.\u003c\/p\u003e\n\u003ch3\u003eDoes the D-ARC replace two antennas or one?\u003c\/h3\u003e\n\u003cp\u003eOne D-ARC replaces two traditional LPDA paddle antennas. It provides both the A and B diversity antenna outputs required by a diversity receiver or antenna distribution system in a single installed unit.\u003c\/p\u003e\n\u003ch3\u003eCan the D-ARC be ceiling-mounted?\u003c\/h3\u003e\n\u003cp\u003eYes. The D-ARC mounts on both walls and ceilings. For multi-zone ceiling installations, ceiling height and room layout should be evaluated to ensure appropriate coverage pattern overlap between zones.\u003c\/p\u003e\n\u003ch3\u003eWhat paint can be used on the D-ARC?\u003c\/h3\u003e\n\u003cp\u003eAny non-metallic paint is compatible. Avoid paints containing metallic particles (including metallic sheen or glitter), which can degrade RF performance by partially shielding the antenna elements.\u003c\/p\u003e\n\u003ch3\u003eWhat distribution system should be used with the D-ARC?\u003c\/h3\u003e\n\u003cp\u003eThe D-ARC is compatible with the DISTRO4 (4-channel), DISTRO5 HDR (5-channel), and DISTRO9 HDR (9-channel). For a complete pack, see the D-ARCDISTRO4 (4-channel) or D-ARCD5 (5-channel) bundles.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the D-ARC?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381471980,"sku":"D-ARC","price":729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-d-arc-diversity-architectural-antenna-for-wireless-microphones-white-470-to-616-mhz-creation-networks-57782.jpg?v=1793683951"},{"product_id":"audio-technica-d-arcd9-diversity-architectural-antenna-distro9-hdr-pack","title":"RF Venue D-ARCD9 – Diversity Architectural Antenna and DISTRO9 HDR Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue D-ARCD9 is a complete wireless microphone antenna system bundle pairing the white Diversity Architectural Antenna with the DISTRO9 HDR 9-channel antenna distribution system. This turnkey kit provides everything needed to upgrade a wireless microphone installation with a discreet, wall- or ceiling-mounted antenna and a high-performance distribution system supporting up to 9 diversity channels. It is designed for AV integrators who need professional RF performance with minimal visual impact in commercial spaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe D-ARCD9 solves a common challenge in installed AV: deploying high-performance wireless microphone antennas in spaces where traditional paddle or whip antennas are visually unacceptable. The Diversity Architectural Antenna (D-ARC) uses a patent-pending dual-feed design to deliver both A and B diversity connections from a single slim-profile enclosure that mounts flush to walls or ceilings. The paintable white housing blends into any interior and can be color-matched with standard latex paint.\u003c\/p\u003e\n\u003cp\u003eThe D-ARC provides a 140-degree conical coverage pattern with 3 dBd gain and a typical range of up to 200 feet, making it well-suited for conference rooms, boardrooms, multi-purpose spaces, and houses of worship. Unlike traditional setups requiring two separate LPDA paddle antennas for A\/B diversity, the D-ARC delivers both channels from a single mounting point via rear-mounted BNC connectors.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-d-arcd9-diversity-architectural-antenna-distro9-hdr-pack-creation-networks-30974.jpg?v=1757903707\" alt=\"RF Venue D-ARCD9 – Diversity Architectural Antenna and DISTRO9 HDR Pack - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eThe DISTRO9 HDR is a 1RU rackmount antenna distribution system supporting 9 channels of diversity wireless across VHF, UHF, and 900 MHz frequency bands. Its proprietary gain structure provides superior dynamic range compared to passive splitter-based systems, with over 60 dB of dynamic range and third-order intercept points of 15 dBm at VHF and 20+ dBm at UHF. Two zone inputs allow coverage of large areas or multiple rooms from a single distribution unit. Cascade capability allows a second DISTRO9 HDR to be connected for up to 17 channels in 2 RU.\u003c\/p\u003e\n\u003cp\u003eThe D-ARCD9 bundle includes all cables required to connect the antenna to the distribution system, including 25-foot and short interconnect RG8X BNC cables, and the DC-Octopus cable for powering up to 9 compatible wireless receivers without wall warts.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiversity Architectural Antenna (White)\u003c\/strong\u003e — Patent-pending dual-feed design delivers both A and B diversity from a single slim-profile wall or ceiling mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable Enclosure\u003c\/strong\u003e — White housing accepts standard latex paint for color-matching to any interior finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140° Conical Coverage, 3 dBd Gain\u003c\/strong\u003e — Provides effective wireless microphone coverage up to 200 feet from the antenna position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDISTRO9 HDR Distribution System\u003c\/strong\u003e — 9 diversity channels in 1 RU, supporting VHF, UHF, and 900 MHz bands with over 60 dB dynamic range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Zone Antenna Inputs\u003c\/strong\u003e — Two zones of antenna input on the DISTRO9 HDR for large venues or multi-room coverage from a single rack unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascade to 17 Channels\u003c\/strong\u003e — Connect a second DISTRO9 HDR via any output for up to 17 wireless mic channels in 2 RU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power for Receivers\u003c\/strong\u003e — Included DC-Octopus cable powers up to 9 compatible wireless receivers, eliminating individual power supplies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Cabling Included\u003c\/strong\u003e — 25' RG8X cables, 1.5' and 2' interconnects, and DC power distribution all included in the bundle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eETL Listed\u003c\/strong\u003e — DISTRO9 HDR is ETL certified for compliance with municipal and government bid specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Diversity Architectural Antenna (White)\u003c\/li\u003e\n\u003cli\u003e1x DISTRO9 HDR 9-Channel Antenna Distribution System with AC power cord\u003c\/li\u003e\n\u003cli\u003e2x 25' RG8X BNC coaxial cables\u003c\/li\u003e\n\u003cli\u003e10x 1.5' RG8X BNC interconnect cables\u003c\/li\u003e\n\u003cli\u003e10x 2' RG8X BNC interconnect cables\u003c\/li\u003e\n\u003cli\u003e1x DC-Octopus Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoardrooms and executive conference rooms requiring discreet antenna placement\u003c\/li\u003e\n\u003cli\u003eHouses of worship with distributed wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eGovernment spaces and municipal facilities requiring ETL-listed components\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms and training rooms with up to 9 wireless microphone channels\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces where visible antennas are architecturally unacceptable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiversity Architectural Antenna Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–698 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Gain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 dBd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Coverage Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e140° conical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Typical Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 200 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Average Return Loss\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-6.4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Polarization\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual (A and B diversity from single enclosure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Mounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWall or ceiling, any orientation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite (paintable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50–1000 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 diversity outputs, 2 zone inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Dynamic Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Output Isolation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60 dB @ 510 MHz; 80 dB @ 200 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR IIP3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 dBm @ VHF; 20+ dBm @ UHF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Form Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1RU rackmount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Cascade\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 17 channels with second DISTRO9 HDR in 2 RU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Certification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eETL listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhy use the Diversity Architectural Antenna instead of paddle antennas?\u003c\/h3\u003e\n\u003cp\u003eThe Diversity Architectural Antenna replaces two separate directional paddle antennas with a single slim-profile unit that mounts flush to a wall or ceiling. It provides both A and B diversity connections from one mounting point, reduces visible hardware in the room, and can be painted to blend into any interior. For conference rooms, boardrooms, and houses of worship, this represents a significant aesthetic and installation advantage over traditional paddle antennas.\u003c\/p\u003e\n\u003ch3\u003eHow many wireless microphone channels can this system support?\u003c\/h3\u003e\n\u003cp\u003eThe DISTRO9 HDR supports 9 diversity wireless microphone channels from a single unit. By cascading a second DISTRO9 HDR, up to 17 channels can be supported in 2 RU of rack space. The Diversity Architectural Antenna can supply sufficient RF signal for this full channel count.\u003c\/p\u003e\n\u003ch3\u003eCan I use this system with wireless microphones from other manufacturers?\u003c\/h3\u003e\n\u003cp\u003eYes. The DISTRO9 HDR and Diversity Architectural Antenna are compatible with any wireless microphone system operating in the 470–698 MHz UHF TV band with standard 50-ohm BNC antenna connections.\u003c\/p\u003e\n\u003ch3\u003eDoes the DISTRO9 HDR power my wireless microphone receivers?\u003c\/h3\u003e\n\u003cp\u003eYes, the included DC-Octopus cable allows the DISTRO9 HDR to provide DC power to up to 9 compatible wireless receivers via the coaxial cable connections, eliminating the need for individual wall warts at each receiver.\u003c\/p\u003e\n\u003ch3\u003eIs the D-ARCBD9 the same bundle with a black antenna?\u003c\/h3\u003e\n\u003cp\u003eYes. The D-ARCBD9 is the identical bundle but includes the Black Diversity Architectural Antenna instead of white. All other components and specifications are the same.\u003c\/p\u003e\n\u003ch3\u003eWhat is the warranty on this product?\u003c\/h3\u003e\n\u003cp\u003eRF Venue products are covered by a manufacturer warranty. Contact Creation Networks at creationnetworks.net for warranty and support information.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381504748,"sku":"D-ARCD9","price":3099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-d-arcd9-diversity-architectural-antenna-distro9-hdr-pack-creation-networks-30974.jpg?v=1793683953"},{"product_id":"audio-technica-d-arcdistro4-diversity-architectural-antenna-distro4-pack","title":"RF Venue D-ARCDISTRO4 – 4-Channel Wireless Mic Pack, White Architectural Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue D-ARCDISTRO4 is a complete 4-channel wireless microphone antenna distribution pack featuring the white Diversity Architectural Antenna, the DISTRO4 4-channel UHF antenna distribution system, and all required cables. This pack provides everything needed for a permanent wireless microphone installation in a single purchase, pairing the Diversity Architectural Antenna's slim wall\/ceiling-mount profile with the DISTRO4's reliable 4-channel distribution and 12VDC receiver power output. Designed for commercial AV integrators, this pack delivers professional wireless microphone antenna performance with a clean, architectural installation aesthetic.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe D-ARCDISTRO4 bundles the white D-ARC antenna with the DISTRO4 active antenna distribution system. The D-ARC antenna uses RF Venue's patent-pending dual-feed design to provide both A and B diversity antenna outputs from a single slim unit, eliminating the need for two separate antennas. Its 140-degree conical coverage pattern and typical range of 200 feet make it suitable for stage-wing, front-of-house, or ceiling placement. The enclosure is paintable with non-metallic paint for custom color matching.\u003c\/p\u003e\n\u003cp\u003eThe DISTRO4 is an active 1RU rack-mount antenna splitter that distributes the RF signal from the D-ARC's A and B outputs to up to four wireless receiver channels. It includes 12VDC power distribution to connected receivers via DC jumper cables, and its cascade output supports connecting additional distribution units for larger systems. The bundle includes ten 1.5-foot BNC jumper cables for connecting receivers in the rack, four DC jumper cables, one AC power cord, and two 25-foot white RG8X coaxial cables for connecting the antenna to the DISTRO4.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-d-arcdistro4-rf-venue-diversity-architectural-antenna-and-distro4-4-channel-uhf-distribution-system-pack-white-470-to-616-mhz-creation-networks-66767.jpg?v=1757903708\" alt=\"RF Venue D-ARCDISTRO4 – 4-Channel Wireless Mic Pack, White Architectural Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eThe D-ARCDISTRO4 is compatible with all major UHF wireless microphone receivers in the 470–616 MHz range. It suits houses of worship, conference rooms, auditoriums, government meeting spaces, and any fixed-installation environment requiring reliable wireless microphone coverage with a clean white antenna appearance.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Diversity Architectural Antenna\u003c\/strong\u003e — Slim, paintable wall\/ceiling-mount profile blends into light-colored installations; dual A\/B outputs in one unit replace two traditional paddle antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140° Conical Coverage\u003c\/strong\u003e — Broad pattern for stage-wing, FOH, or ceiling placement with typical range to 200 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDISTRO4 Included\u003c\/strong\u003e — Active 1RU rack-mount 4-channel antenna distribution system with 12VDC receiver power output and cascade port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12VDC Power Distribution\u003c\/strong\u003e — Powers up to four connected wireless receivers via DC jumper cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Cable Package\u003c\/strong\u003e — Two 25' white RG8X cables, 10 x 1.5' BNC jumpers, 4 x DC jumpers, and AC power cord included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascade Output\u003c\/strong\u003e — DISTRO4 cascade port supports additional distribution units for channel count expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable Enclosure\u003c\/strong\u003e — Antenna accepts non-metallic paint for color matching to any installation environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with any UHF wireless microphone receiver in the 470–616 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship with permanent wireless microphone installations\u003c\/li\u003e\n\u003cli\u003eConference room and boardroom wireless audio systems\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center productions\u003c\/li\u003e\n\u003cli\u003eGovernment and corporate meeting spaces\u003c\/li\u003e\n\u003cli\u003eTraining room and multi-purpose room AV installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(1) D-ARC Diversity Architectural Antenna (white), (1) DISTRO4, (2) 25' White RG8X BNC Cables, (10) 1.5' BNC Jumpers, (4) DC Jumpers, (1) AC Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite (paintable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e140° conical, range to 200 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Outputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA and B diversity (dual BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO4 Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 receivers (plus cascade)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO4 Form Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1RU rack-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–616 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Power Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12VDC to up to 4 receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between D-ARCDISTRO4 and D-ARCBDISTRO4?\u003c\/h3\u003e\n\u003cp\u003eThe D-ARCDISTRO4 includes the white Diversity Architectural Antenna with white cables; D-ARCBDISTRO4 includes the black-finish version with black cables. Both packs are functionally identical — the choice is based on installation color requirements.\u003c\/p\u003e\n\u003ch3\u003eHow does this pack differ from the D-ARCD5?\u003c\/h3\u003e\n\u003cp\u003eThe D-ARCDISTRO4 includes the DISTRO4 (4-channel, 1RU) and supports up to four wireless receiver channels. The D-ARCD5 includes the DISTRO5 HDR (5-channel, half-rack) and supports five channels with HDR technology. For installations requiring five channels or HDR performance, the D-ARCD5 is recommended.\u003c\/p\u003e\n\u003ch3\u003eCan the DISTRO4 support more than four wireless receivers?\u003c\/h3\u003e\n\u003cp\u003eYes. The DISTRO4 cascade output connects to additional DISTRO4 or DISTRO5 HDR units for systems requiring more than four channels.\u003c\/p\u003e\n\u003ch3\u003eIs this compatible with all wireless microphone brands?\u003c\/h3\u003e\n\u003cp\u003eYes. The D-ARCDISTRO4 works with all major UHF wireless microphone receivers operating in the 470–616 MHz range.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the D-ARCDISTRO4?\u003c\/h3\u003e\n\u003cp\u003eThe RF Venue D-ARCDISTRO4 is available through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381537516,"sku":"D-ARCDISTRO4","price":1529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-d-arcdistro4-rf-venue-diversity-architectural-antenna-and-distro4-4-channel-uhf-distribution-system-pack-white-470-to-616-mhz-creation-networks-66767.jpg?v=1793683954"},{"product_id":"audio-technica-dc-octopus-dc-power-distribution-cable-for-combine8-or-distro9","title":"RF Venue DC-OCTOPUS – 8-Connector DC Power Distribution Cable","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue DC-OCTOPUS is an 8-connector DC power distribution cable that provides eight individual DC power outputs from a single connection point on an RF Venue antenna distribution or combining system. It simplifies power distribution in multi-receiver wireless audio racks by eliminating multiple individual DC power cables.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eManaging DC power distribution in a multi-channel wireless audio rack becomes increasingly complex as system size grows. The DC-OCTOPUS consolidates power delivery from a single source into eight independent output connections using an Anderson PowerPole input connector. The Anderson PowerPole design provides a secure, tool-free connection that is widely used in professional AV and broadcast equipment for its reliability and current-carrying capacity. The DC-OCTOPUS is designed specifically for use with the RF Venue DISTRO9 HDR, DISTRO5 HDR, and COMBINE8 systems — verify compatibility with your specific RF Venue hardware configuration before ordering. For a complete power kit including the power brick, see the RF Venue OCTOPOWER bundle.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Output Power Distribution\u003c\/strong\u003e — Provides eight individual DC outputs from a single Anderson PowerPole input connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnderson PowerPole Connector\u003c\/strong\u003e — Secure, reliable connector widely used in professional AV and broadcast power distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimplifies Rack Wiring\u003c\/strong\u003e — Eliminates individual power supply cables for each connected device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible RF Venue Systems\u003c\/strong\u003e — Designed for use with DISTRO9 HDR, DISTRO5 HDR, and COMBINE8.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAnderson PowerPole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRF Venue DISTRO9 HDR, DISTRO5 HDR, COMBINE8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381570284,"sku":"DC-OCTOPUS","price":64.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-dc-octopus-dc-power-distribution-cable-for-combine8-or-distro9-creation-networks-40388.jpg?v=1757903709"},{"product_id":"audio-technica-dfin-multi-purpose-diversity-fin-antenna-for-wireless-microphones-combines-one-lpda-and-one-dipole-antenna-in-an-orthogonal-right-angle-configuration-includes-cloth-cover","title":"RF Venue DFIN – Diversity Fin Wireless Microphone Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue DFIN Diversity Fin is a patented cross-polarized UHF antenna for wireless microphone systems that provides dual A\/B diversity reception from a single unit. Its orthogonal antenna element design — combining a log-periodic dipole array (LPDA) with a dipole element oriented at 90 degrees — captures both vertically and horizontally polarized signals simultaneously, eliminating the most common cause of wireless microphone dropouts. Coverage is 120 degrees horizontal with typical range exceeding 300 feet. This is the standard stand-mount version with padded cover, suited for touring, rental, and flexible deployment.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eTraditional wireless microphone setups use two separate LPDA paddle antennas for A\/B diversity reception. The Diversity Fin replaces both with a single compact unit. One LPDA element captures vertically polarized signals while a dipole element oriented at 90 degrees captures horizontally polarized signals — the two elements connect to separate A and B BNC output jacks that feed directly into a diversity receiver or antenna distribution system. This polarization diversity approach addresses the main cause of wireless microphone dropouts: signal loss when the transmitter changes orientation relative to the antenna.\u003c\/p\u003e\n\u003cp\u003eThe DFIN is the original stand-mount version of the Diversity Fin, shipping with a padded protective cover and a stand-mount bracket that accepts a standard microphone stand thread. The padded cover protects the antenna element from physical damage during transport, storage, and repeated setup\/teardown on touring productions. A single DFIN can support up to 25 wireless receivers using the DISTRO4, or up to 81 receivers using the DISTRO9 HDR. The 120-degree horizontal coverage pattern makes it effective when positioned at stage wings or front of house, pointed directly at the performance area.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-dfin-rf-venue-diversity-fin-antenna-with-stand-mount-for-wireless-microphone-systems-black-470-to-698-mhz-creation-networks-30347.jpg?v=1757903716\" alt=\"RF Venue DFIN – Diversity Fin Wireless Microphone Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-dfin-rf-venue-diversity-fin-antenna-with-stand-mount-for-wireless-microphone-systems-black-470-to-698-mhz-creation-networks-33588.jpg?v=1757903717\" alt=\"RF Venue DFIN – Diversity Fin Wireless Microphone Antenna - Creation Networks\" style=\"max-width:100%;height:auto;margin-top:12px;\"\u003e\n\u003cp\u003eCompatible with all UHF wireless microphone receivers in the 470–698 MHz range, the DFIN works with systems from Shure, Sennheiser, Sony, Audio-Technica, and all other major manufacturers. For permanent wall-mount installations, see the DFINB (black) or DFINW (white) install versions. For complete distribution packs, see the DFINDISTRO4 (4-channel) or DFIND5 (5-channel) bundles.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented Cross-Polarized Design\u003c\/strong\u003e — LPDA and dipole elements at 90° capture both vertical and horizontal polarizations, reducing orientation-based dropouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Antenna Replaces Two\u003c\/strong\u003e — Provides A and B diversity outputs from one unit, eliminating the need for two separate paddle antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120° Horizontal Coverage\u003c\/strong\u003e — Directional pattern for stage-wing or FOH placement with typical range exceeding 300 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand-Mount with Padded Cover\u003c\/strong\u003e — Includes stand-mount bracket and padded cover for touring, rental, and flexible deployment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScales to 81 Channels\u003c\/strong\u003e — A single DFIN supports up to 25 receivers (DISTRO4) or 81 receivers (DISTRO9 HDR) via cascaded distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with all UHF wireless microphone receivers in the 470–698 MHz range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Band Coverage\u003c\/strong\u003e — Covers all current professional UHF wireless microphone frequency bands in the 470–698 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTouring and rental wireless microphone antenna systems\u003c\/li\u003e\n\u003cli\u003eHouse of worship with wireless microphone deployments\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center productions\u003c\/li\u003e\n\u003cli\u003eBroadcast studio and live event wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eConference room and training room wireless audio installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDFIN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVersion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStand-mount with padded cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Design\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCross-polarized LPDA + dipole (patented)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120° horizontal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300+ feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA and B diversity (dual BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–698 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Receivers (single unit)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25 via DISTRO4; up to 81 via DISTRO9 HDR cascade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between DFIN, DFINB, and DFINW?\u003c\/h3\u003e\n\u003cp\u003eDFIN includes a stand-mount bracket and padded cover for touring and flexible deployment. DFINB includes a black wall-mount bracket for permanent installation in dark environments. DFINW includes a white wall-mount bracket for permanent installation in light-colored environments. All three versions contain the same antenna element with identical RF performance.\u003c\/p\u003e\n\u003ch3\u003eHow many Diversity Fin antennas are needed per receiver?\u003c\/h3\u003e\n\u003cp\u003eOnly one Diversity Fin is required per diversity receiver chain. Connect the DFIN's A output to the receiver's A antenna input and the B output to the receiver's B antenna input. One DFIN supports four or more receivers when used with an antenna distribution system.\u003c\/p\u003e\n\u003ch3\u003eCan the Diversity Fin be used as a transmit antenna for IEM systems?\u003c\/h3\u003e\n\u003cp\u003eThe Diversity Fin is designed for receive applications only. Using it as a transmit antenna for IEM systems defeats the polarization diversity benefit. For IEM transmit, use the CP Beam, CP Architectural, or CP Stage antenna.\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum range of the Diversity Fin?\u003c\/h3\u003e\n\u003cp\u003eTypical range exceeds 300 feet. Actual range depends on the RF environment, transmitter power level, antenna placement, and number of competing RF signals. Very few live audio applications exceed 300 feet antenna-to-transmitter distance.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the Diversity Fin?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381603052,"sku":"DFIN","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-dfin-rf-venue-diversity-fin-antenna-with-stand-mount-for-wireless-microphone-systems-black-470-to-698-mhz-creation-networks-30347.jpg?v=1793683956"},{"product_id":"audio-technica-dfinb-multi-purpose-diversity-fin-antenna-black-for-wireless-microphones-combines-one-lpda-and-one-dipole-antenna-in-an-orthogonal-right-angle-configuration","title":"RF Venue DFINB – Diversity Fin Antenna, Black Wall-Mount Install","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue DFINB is the black permanent-install version of the Diversity Fin wireless microphone antenna. Functionally identical to the standard stand-mount DFIN, the DFINB ships with a black wall-mount bracket instead of a stand-mount bracket, making it suited for fixed installations in dark-finish environments. Its patented cross-polarized design — an LPDA and dipole element at 90 degrees — provides both A and B diversity outputs from a single unit, eliminating orientation-based wireless microphone dropouts. Coverage is 120 degrees horizontal with typical range exceeding 300 feet.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DFINB uses the same antenna element as the DFIN and DFINW, sharing identical RF performance. The distinction is the included mounting hardware: the DFINB ships with a black wall-mount bracket designed for permanent fixed installation on a wall surface. This makes it the right choice for houses of worship, conference rooms, and auditoriums where the antenna is to be permanently mounted and where the installation environment has dark walls or dark-finish AV hardware requirements.\u003c\/p\u003e\n\u003cp\u003eWall-mounting with the DFINB provides a cleaner installation than stand-mounting — no stand footprint on stage, no tripod visible in the room, and a more professional appearance for permanent venues. The antenna is pointed at the performance area from the wall-mount position, typically at stage wings or at the side of the room aimed toward the stage or presenter area. One DFINB provides both A and B diversity feeds for an antenna distribution system, supporting four or more wireless receiver channels through the DISTRO5 HDR or DISTRO4. For a complete distribution pack including the DISTRO4, see the DFINBDISTRO4. For a pack with the DISTRO5 HDR, see the DFINBD5.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-dfinb-rf-venue-diversity-fin-antenna-with-wall-mount-bracket-for-wireless-microphone-systems-black-470-to-698-mhz-creation-networks-16366.jpg?v=1757903718\" alt=\"RF Venue DFINB – Diversity Fin Antenna, Black Wall-Mount Install - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eCompatible with all UHF wireless microphone receivers in the 470–698 MHz range, the DFINB works with Shure, Sennheiser, Sony, Audio-Technica, and all major brands.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Wall-Mount Bracket\u003c\/strong\u003e — Permanent-install version for fixed mounting on dark walls; cleaner installation profile than stand-mount alternatives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented Cross-Polarized Design\u003c\/strong\u003e — LPDA and dipole at 90° capture both polarization planes; reduces orientation-based wireless dropouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Antenna Replaces Two\u003c\/strong\u003e — Provides both A and B diversity outputs from one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120° Horizontal, 300+ Feet Range\u003c\/strong\u003e — Directional pattern for wall-mounted stage-wing or room-side placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentical RF Performance to DFIN\/DFINW\u003c\/strong\u003e — Same antenna element and coverage specifications; differs only in mounting hardware and finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with all UHF wireless microphone receivers in the 470–698 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship with dark-finish walls and permanent wireless microphone installations\u003c\/li\u003e\n\u003cli\u003eConference room and boardroom wireless audio installations\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center fixed antenna deployments\u003c\/li\u003e\n\u003cli\u003eGovernment and corporate meeting spaces with dark hardware specifications\u003c\/li\u003e\n\u003cli\u003eTraining room and multi-purpose room permanent AV systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDFINB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVersion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack wall-mount (permanent install)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Design\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCross-polarized LPDA + dipole (patented)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120° horizontal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300+ feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA and B diversity (dual BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–698 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs the DFINB the same antenna element as the DFIN?\u003c\/h3\u003e\n\u003cp\u003eYes. DFINB, DFIN, and DFINW all use the same Diversity Fin antenna element with identical RF performance. The difference is mounting hardware: DFIN has a stand-mount bracket with padded cover (touring), DFINB has a black wall-mount bracket (permanent, dark finish), and DFINW has a white wall-mount bracket (permanent, light finish).\u003c\/p\u003e\n\u003ch3\u003eCan the DFINB be used with any antenna distribution system?\u003c\/h3\u003e\n\u003cp\u003eYes. The DFINB's A and B BNC outputs connect to any compatible antenna distribution system including RF Venue DISTRO4, DISTRO5 HDR, DISTRO9 HDR, and third-party distributors.\u003c\/p\u003e\n\u003ch3\u003eIs the DFINB suitable for ceiling mounting?\u003c\/h3\u003e\n\u003cp\u003eThe DFINB is designed for wall mounting. For ceiling installations, the Diversity Architectural Antenna (D-ARC\/D-ARCB) is better suited due to its ceiling-optimized mounting design.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the DFINB?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381635820,"sku":"DFINB","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-dfinb-rf-venue-diversity-fin-antenna-with-wall-mount-bracket-for-wireless-microphone-systems-black-470-to-698-mhz-creation-networks-16366.jpg?v=1757903718"},{"product_id":"audio-technica-dfinbdistro4-distro4-4-channel-antenna-distributor-diversity-fin-black-install-antenna-2-25-rg8x-coaxial-cables-all-dc-and-rf-jumpers-included-wall-mounting-hardware-included","title":"RF Venue DFINBDISTRO4 – 4-Channel Wireless Mic Pack, Black Wall-Mount Fin Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue DFINBDISTRO4 is a complete 4-channel wireless microphone antenna distribution pack featuring the black wall-mount Diversity Fin antenna (DFINB), the DISTRO4 4-channel UHF distribution system, and all required cables. Designed for permanent AV installations in dark-finish environments, this pack provides professional wireless microphone antenna performance with a wall-mounted black antenna profile. The Diversity Fin's patented cross-polarized design covers 120 degrees horizontally with typical range over 300 feet, while the DISTRO4 distributes the signal to up to four wireless receiver channels with 12VDC power output.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DFINBDISTRO4 pairs the DFINB — the black permanent-install version of RF Venue's Diversity Fin antenna — with the DISTRO4 active antenna distributor. The DFINB ships with a black wall-mount bracket for clean, fixed-installation mounting, distinguishing it from the standard DFIN which uses a stand-mount bracket for touring flexibility. The Diversity Fin uses RF Venue's patented orthogonal polarization diversity design: an LPDA element for vertically polarized signals and a dipole element for horizontally polarized signals, combined in a single unit. A single DFINB provides both A and B diversity feeds, eliminating the need for two separate antennas.\u003c\/p\u003e\n\u003cp\u003eThe DISTRO4 is a 1RU active rack-mount antenna distribution system that splits the A and B signals from the DFINB to up to four wireless receiver channels with 12VDC receiver power distribution. The cascade output allows connection to additional distributor units for larger systems. The bundle includes two 25-foot BNC cables, ten 1.5-foot BNC jumper cables, four DC jumper cables, and an AC power cord — everything needed for a complete installation.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-dfinbdistro4-rf-venue-4-channel-antenna-distributor-with-black-diversity-fin-antenna-and-cables-bundle-creation-networks-11649.jpg?v=1757903718\" alt=\"RF Venue DFINBDISTRO4 – 4-Channel Wireless Mic Pack, Black Wall-Mount Fin Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eCompatible with all UHF wireless microphone receivers in the 470–698 MHz range, the DFINBDISTRO4 suits houses of worship, conference rooms, auditoriums, and any permanent installation with dark-finish hardware requirements.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Wall-Mount Diversity Fin Antenna\u003c\/strong\u003e — DFINB permanent-install version with black wall-mount bracket for clean fixed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented Cross-Polarized Design\u003c\/strong\u003e — LPDA and dipole elements at 90° capture both polarization planes in one unit, reducing orientation-based wireless dropouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120° Horizontal Coverage\u003c\/strong\u003e — Directional pattern for stage-wing or FOH placement with typical range exceeding 300 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDISTRO4 Included\u003c\/strong\u003e — Active 1RU 4-channel antenna distributor with 12VDC receiver power and cascade port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12VDC Power Distribution\u003c\/strong\u003e — Powers up to four wireless receivers via DC jumper cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Black Cable Set\u003c\/strong\u003e — Two 25' BNC cables, 10 x 1.5' BNC jumpers, 4 x DC jumpers, and AC power cord.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Antenna Replaces Two\u003c\/strong\u003e — One DFINB provides both A and B diversity feeds for the entire receiver chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with all UHF wireless microphone receivers in the 470–698 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship with permanent wall-mounted wireless microphone antenna systems\u003c\/li\u003e\n\u003cli\u003eConference room and boardroom wireless audio installations\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center productions\u003c\/li\u003e\n\u003cli\u003eGovernment and corporate meeting spaces with dark-finish AV specifications\u003c\/li\u003e\n\u003cli\u003eTraining room and multi-purpose room fixed AV installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(1) DFINB Diversity Fin Antenna (black wall-mount), (1) DISTRO4, (2) 25' RG8X BNC Cables, (10) 1.5' BNC Jumpers, (4) DC Jumpers, (1) AC Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack wall-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Design\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCross-polarized LPDA + dipole (patented)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120° horizontal, 300+ feet range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Outputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA and B diversity (dual BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO4 Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 receivers (plus cascade)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–698 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Power Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12VDC to up to 4 receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between DFINBDISTRO4 and DFINDISTRO4?\u003c\/h3\u003e\n\u003cp\u003eDFINBDISTRO4 includes the DFINB with a black wall-mount bracket for permanent installations; DFINDISTRO4 includes the standard DFIN with a padded cover and stand-mount bracket for touring or flexible deployment. Both packs use the same Diversity Fin antenna element with identical RF performance.\u003c\/p\u003e\n\u003ch3\u003eHow does DFINBDISTRO4 compare to DFINBD5?\u003c\/h3\u003e\n\u003cp\u003eDFINBDISTRO4 includes the DISTRO4 (4-channel, 1RU); DFINBD5 includes the DISTRO5 HDR (5-channel, half-rack) with HDR technology. The DFINBD5 supports one additional channel and offers improved dynamic range.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the DFINBDISTRO4?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381701356,"sku":"DFINBDISTRO4","price":1529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-dfinbdistro4-rf-venue-4-channel-antenna-distributor-with-black-diversity-fin-antenna-and-cables-bundle-creation-networks-11649.jpg?v=1793683958"},{"product_id":"audio-technica-dfind9-one-distro9-hdr-9-channel-antenna-distribution-system-one-dfin-diversity-fin-antenna-for-wireless-microphones-two-rg8x25-25-foot-coaxial-cables-with-bnc-male-connectors-two-rg8x1-5-10-10-packs-of-1-5-foot-interconnect-cables","title":"RF Venue DFIND9 – Diversity Fin Antenna and DISTRO9 HDR 9-Channel Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue DFIND9 is a complete wireless microphone antenna upgrade bundle pairing the black Diversity Fin antenna (with stand mount bracket and padded cover) with the DISTRO9 HDR 9-channel antenna distribution system. The Diversity Fin uses a patented cross-polarized hybrid design to capture wireless microphone signals from performers in any orientation, reducing polarization dropout. With the DISTRO9 HDR, a single Diversity Fin can supply up to 9 diversity wireless microphone channels, with cascade capability extending to 17 channels in 2 RU. This bundle is the most direct path to professional wireless microphone RF performance for live sound, house of worship, and touring applications.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Diversity Fin combines two antenna elements in one housing: a vertically polarized log-periodic directional array (LPDA) and a horizontally polarized dipole mounted at a right angle. This patented cross-polarized design captures wireless microphone signals regardless of transmitter body pack orientation, addressing one of the most common sources of signal dropout in live wireless deployments where performers move continuously.\u003c\/p\u003e\n\u003cp\u003eAt 300 mm wide and 370 mm tall, the Diversity Fin is compact enough for placement on an antenna stand at the front of a stage or at the front-of-house position. The included padded cover protects the antenna during transport, and the stand mount bracket provides standard microphone stand compatibility. The frequency range extends from 470 to 928 MHz, covering UHF TV band and beyond, with 1.8 dBd gain across the operating range.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-dfind9-rf-venue-distro9-hdr-9-channel-antenna-distributor-bundle-black-stand-mount-diversity-fin-creation-networks-71319.jpg?v=1757903720\" alt=\"RF Venue DFIND9 – Diversity Fin Antenna and DISTRO9 HDR 9-Channel Pack - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eThe DISTRO9 HDR receives the antenna signals and distributes them to up to 9 wireless microphone receivers. Its proprietary gain structure delivers over 60 dB of dynamic range, significantly outperforming passive splitter-based distribution in high-channel-count wireless environments. Two zone inputs allow the DISTRO9 HDR to receive signals from antennas at different locations in the venue for large-space or multi-room coverage. The ETL listing makes the DISTRO9 HDR compliant with municipal and government bid specifications.\u003c\/p\u003e\n\u003cp\u003eThe bundle includes all interconnect cabling — 25-foot main runs from antenna to rack, 1.5-foot and 2-foot short jumpers between the distribution system and receivers, and the DC power kit for powering wireless receivers through the coaxial cable.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented Cross-Polarized Diversity Fin Antenna\u003c\/strong\u003e — LPDA + dipole hybrid captures both vertical and horizontal polarization from a single antenna position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Stand Mount Configuration\u003c\/strong\u003e — Includes padded carry cover and standard microphone stand mount bracket for portable and semi-permanent deployment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Frequency Coverage\u003c\/strong\u003e — Diversity Fin operates 470–928 MHz, supporting UHF TV band and adjacent spectrum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDISTRO9 HDR 9-Channel Distribution\u003c\/strong\u003e — 1RU rackmount, over 60 dB dynamic range, two zone inputs, ETL listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascade to 17 Channels\u003c\/strong\u003e — Add a second DISTRO9 HDR for 17 wireless mic channels in 2 RU from a single antenna pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power for Receivers\u003c\/strong\u003e — DC-KIT-D9 included for powering compatible wireless receivers via coaxial cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Cabling Included\u003c\/strong\u003e — 25' RG8X antenna cables, 1.5' and 2' interconnects, and DC power distribution all in the bundle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eETL Listed\u003c\/strong\u003e — DISTRO9 HDR meets certification requirements for government, institutional, and specification-driven projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Diversity Fin Antenna (Black) with padded cover and stand mount bracket\u003c\/li\u003e\n\u003cli\u003e1x DISTRO9 HDR 9-Channel Antenna Distribution System with AC power cord\u003c\/li\u003e\n\u003cli\u003e2x 25' RG8X BNC coaxial cables\u003c\/li\u003e\n\u003cli\u003e10x 1.5' RG8X BNC interconnect cables\u003c\/li\u003e\n\u003cli\u003e10x 2' RG8X BNC interconnect cables\u003c\/li\u003e\n\u003cli\u003e1x DC-KIT-D9 DC Power Distribution Kit for DISTRO9\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLive performance venues with performers moving freely on stage\u003c\/li\u003e\n\u003cli\u003eHouses of worship with dynamic wireless microphone use across large sanctuaries\u003c\/li\u003e\n\u003cli\u003eTouring productions requiring portable antenna deployment at each venue\u003c\/li\u003e\n\u003cli\u003eAuditoriums and multi-purpose rooms with up to 9 wireless microphone channels\u003c\/li\u003e\n\u003cli\u003eGovernment and institutional facilities with ETL listing requirements\u003c\/li\u003e\n\u003cli\u003eConference centers hosting large-format events with roving presenters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiversity Fin Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–928 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiversity Fin Gain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.8 dBd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiversity Fin Impedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Polarization\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCross-polarized: LPDA (vertical) + dipole (horizontal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 mm (12\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e370 mm (14.6\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Mount\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStand mount (1\/4-20, 3\/8-16, 5\/8-27 compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50–1000 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 diversity outputs, 2 zone inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Dynamic Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Output Isolation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60 dB @ 510 MHz; 80 dB @ 200 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR IIP3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 dBm @ VHF; 20+ dBm @ UHF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Form Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1RU rackmount (480 × 45 × 250 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.7 kg (6 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Certification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eETL listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhy does the Diversity Fin outperform a standard LPDA paddle antenna?\u003c\/h3\u003e\n\u003cp\u003eTraditional LPDA paddle antennas capture only one polarization of the RF signal. Body pack transmitters change orientation as performers move, causing polarization mismatch between the transmitter and a single-polarization antenna. The Diversity Fin captures both vertical and horizontal polarizations simultaneously from its patented LPDA + dipole design, eliminating this class of dropout.\u003c\/p\u003e\n\u003ch3\u003eCan the Diversity Fin supply more than 9 channels?\u003c\/h3\u003e\n\u003cp\u003eYes. By cascading a second DISTRO9 HDR, a single Diversity Fin can supply up to 17 wireless microphone channels in 2 RU. RF Venue documentation notes the antenna can supply up to 81 receivers with appropriate distribution infrastructure.\u003c\/p\u003e\n\u003ch3\u003eIs the DFIND9 appropriate for permanent installation or portable use only?\u003c\/h3\u003e\n\u003cp\u003eThe stand mount version (DFIND9) is designed for portable deployment on microphone stands. For permanent wall-mount installation, the DFINBD9 (black wall mount) or DFINWD9 (white wall mount) versions are available.\u003c\/p\u003e\n\u003ch3\u003eDoes the bundle include everything needed to connect to wireless receivers?\u003c\/h3\u003e\n\u003cp\u003eYes. The bundle includes 25-foot antenna cables, short interconnect cables for rack connections, and the DC power kit. Only the wireless microphone receivers themselves are not included.\u003c\/p\u003e\n\u003ch3\u003eIs this compatible with any wireless microphone brand?\u003c\/h3\u003e\n\u003cp\u003eYes. The DISTRO9 HDR and Diversity Fin are compatible with any wireless microphone system with 50-ohm BNC antenna connections operating in the 470–698 MHz UHF band (and 470–928 MHz for the antenna).\u003c\/p\u003e\n\u003ch3\u003eWhat warranty covers this bundle?\u003c\/h3\u003e\n\u003cp\u003eRF Venue products are backed by a manufacturer warranty. Contact Creation Networks at creationnetworks.net for support.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381734124,"sku":"DFIND9","price":3099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-dfind9-rf-venue-distro9-hdr-9-channel-antenna-distributor-bundle-black-stand-mount-diversity-fin-creation-networks-71319.jpg?v=1793683960"},{"product_id":"audio-technica-dfindistro4-distro4-4-channel-antenna-distributor-diversity-fin-antenna-2-25-rg8x-coaxial-cables-all-dc-and-rf-jumpers-included","title":"RF Venue DFINDISTRO4 – 4-Channel Wireless Mic Pack, Stand-Mount Diversity Fin Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue DFINDISTRO4 is a complete 4-channel wireless microphone antenna distribution pack featuring the standard stand-mount Diversity Fin antenna (DFIN), the DISTRO4 4-channel UHF distribution system, and all required cables. This pack provides a versatile, professional wireless microphone antenna solution suitable for both touring productions and permanent installations where stand-mounting is preferred. The Diversity Fin's patented cross-polarized design delivers 120-degree horizontal coverage with typical range over 300 feet, and the DISTRO4 distributes the signal to four wireless receivers with 12VDC power output.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DFINDISTRO4 is the standard touring\/flexible version of the DFIN antenna distribution pack. It includes the DFIN with its padded protective cover and stand-mount bracket, paired with the DISTRO4 active antenna distributor and a complete cable set. The DFIN's padded cover provides physical protection during transport and storage, making this pack well suited for rental inventory, touring productions, and installations where the antenna may be repositioned periodically.\u003c\/p\u003e\n\u003cp\u003eThe Diversity Fin antenna uses RF Venue's patented orthogonal polarization diversity: an LPDA element captures vertically polarized signals and a dipole element captures horizontally polarized signals — both in a single unit, providing both A and B diversity feeds without requiring two separate antennas. Coverage is 120 degrees horizontal with typical range exceeding 300 feet. The DISTRO4 is a 1RU active rack-mount antenna distribution system with 12VDC receiver power distribution and a cascade output for expanding the system beyond four channels. The bundle includes two 25-foot BNC cables, ten 1.5-foot BNC jumpers, four DC jumpers, and an AC power cord.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-dfindistro4-rf-venue-4-channel-antenna-distributor-with-cloth-covered-diversity-fin-antenna-and-cables-bundle-creation-networks-45019.jpg?v=1757903721\" alt=\"RF Venue DFINDISTRO4 – 4-Channel Wireless Mic Pack, Stand-Mount Diversity Fin Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eCompatible with all UHF wireless microphone receivers in the 470–698 MHz range, the DFINDISTRO4 suits touring and rental AV companies, houses of worship, auditoriums, and broadcast studios requiring a versatile, high-performance antenna distribution system.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand-Mount Diversity Fin Antenna\u003c\/strong\u003e — DFIN with padded cover and stand-mount bracket; versatile for touring, rental, and flexible permanent deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented Cross-Polarized Design\u003c\/strong\u003e — LPDA and dipole elements at 90° in one unit; eliminates orientation-based wireless dropouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120° Horizontal, 300+ Feet Range\u003c\/strong\u003e — Directional pattern for stage-wing or FOH placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDISTRO4 Included\u003c\/strong\u003e — Active 1RU 4-channel antenna distributor with 12VDC power and cascade output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Cable Package\u003c\/strong\u003e — Two 25' BNC cables, 10 x 1.5' BNC jumpers, 4 x DC jumpers, and AC power cord.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePadded Protective Cover\u003c\/strong\u003e — Protects the DFIN antenna element during transport and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Antenna Replaces Two\u003c\/strong\u003e — One DFIN delivers both A and B diversity feeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with all UHF wireless microphone receivers in the 470–698 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTouring and rental AV production companies\u003c\/li\u003e\n\u003cli\u003eHouse of worship with flexible antenna positioning requirements\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center productions\u003c\/li\u003e\n\u003cli\u003eBroadcast studio and live event production\u003c\/li\u003e\n\u003cli\u003eConference room and training room wireless audio systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(1) DFIN Diversity Fin Antenna (stand-mount, padded cover), (1) DISTRO4, (2) 25' RG8X BNC Cables, (10) 1.5' BNC Jumpers, (4) DC Jumpers, (1) AC Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Version\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStand-mount with padded cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120° horizontal, 300+ feet range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Outputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA and B diversity (dual BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO4 Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 receivers (plus cascade)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–698 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Power Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12VDC to up to 4 receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat distinguishes DFINDISTRO4 from DFINBDISTRO4 and DFINWDISTRO4?\u003c\/h3\u003e\n\u003cp\u003eDFINDISTRO4 includes the stand-mount DFIN with padded cover for touring\/flexible use. DFINBDISTRO4 includes the black wall-mount DFINB, and DFINWDISTRO4 includes the white wall-mount DFINW. All three packs have the same DISTRO4 and identical RF performance.\u003c\/p\u003e\n\u003ch3\u003eHow does DFINDISTRO4 compare to DFIND5?\u003c\/h3\u003e\n\u003cp\u003eDFINDISTRO4 includes the DISTRO4 (4-channel, 1RU) for up to four channels. DFIND5 includes the DISTRO5 HDR (5-channel, half-rack) with HDR technology, supporting five channels with improved dynamic range.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the DFINDISTRO4?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381766892,"sku":"DFINDISTRO4","price":1529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-dfindistro4-rf-venue-4-channel-antenna-distributor-with-cloth-covered-diversity-fin-antenna-and-cables-bundle-creation-networks-45019.jpg?v=1793683961"},{"product_id":"audio-technica-dfinw-multi-purpose-diversity-fin-antenna-white-for-wireless-microphones-combines-one-lpda-and-one-dipole-antenna-in-an-orthogonal-right-angle-configuration","title":"RF Venue DFINW – Diversity Fin Antenna, White Wall-Mount Install","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue DFINW is the white permanent-install version of the Diversity Fin wireless microphone antenna. Functionally identical to the DFIN and DFINB, the DFINW ships with a white wall-mount bracket for fixed installation in light-colored environments. Its patented cross-polarized design — an LPDA and dipole element at 90 degrees — provides both A and B diversity outputs from a single unit, eliminating orientation-based wireless microphone dropouts. Coverage is 120 degrees horizontal with typical range exceeding 300 feet.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DFINW is the white wall-mount version of RF Venue's Diversity Fin antenna family. It uses the same patented antenna element as the DFIN and DFINB, providing identical RF performance — the change is solely the white wall-mount bracket in place of a stand-mount or black wall-mount bracket. This makes the DFINW the appropriate choice for houses of worship, conference rooms, and corporate meeting spaces with white or light-colored walls where a permanent, clean-looking wireless microphone antenna installation is required.\u003c\/p\u003e\n\u003cp\u003eMounting the DFINW to a wall provides a professional, permanent installation appearance without the footprint of a microphone stand on stage or in the room. The white bracket blends into most standard wall surfaces. The antenna is aimed at the performance area from the wall-mount position — typically at stage wings or the side of the room pointed toward the presenter or talent area. One DFINW provides both A and B BNC outputs for direct connection to an antenna distribution system (DISTRO4, DISTRO5 HDR, DISTRO9 HDR), supporting four or more wireless receiver channels from a single antenna unit. For complete distribution packs with all cables included, see the DFINWDISTRO4 (4-channel) or DFINWD5 (5-channel) bundles.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-dfinw-rf-venue-diversity-fin-antenna-with-wall-mount-bracket-for-wireless-microphone-systems-white-470-to-698-mhz-creation-networks-37341.jpg?v=1757903721\" alt=\"RF Venue DFINW – Diversity Fin Antenna, White Wall-Mount Install - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eCompatible with all UHF wireless microphone receivers in the 470–698 MHz range, the DFINW works with Shure, Sennheiser, Sony, Audio-Technica, and all other major brands.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Wall-Mount Bracket\u003c\/strong\u003e — Permanent-install version for fixed mounting on light-colored walls; clean, professional appearance for finished interior spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented Cross-Polarized Design\u003c\/strong\u003e — LPDA and dipole at 90° capture both polarization planes; reduces orientation-based wireless dropouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Antenna Replaces Two\u003c\/strong\u003e — Provides both A and B diversity outputs from one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120° Horizontal, 300+ Feet Range\u003c\/strong\u003e — Directional pattern for wall-mounted stage-wing or room-side placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentical RF Performance to DFIN\/DFINB\u003c\/strong\u003e — Same antenna element; differs only in mounting hardware and finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with all UHF wireless microphone receivers in the 470–698 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship with white interior walls and permanent wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eConference room and boardroom wireless audio installations\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center fixed antenna systems\u003c\/li\u003e\n\u003cli\u003eGovernment and corporate meeting spaces with white hardware specifications\u003c\/li\u003e\n\u003cli\u003eTraining room and multi-purpose room permanent AV installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDFINW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVersion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite wall-mount (permanent install)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Design\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCross-polarized LPDA + dipole (patented)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120° horizontal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300+ feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA and B diversity (dual BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–698 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs the DFINW the same antenna as DFIN and DFINB?\u003c\/h3\u003e\n\u003cp\u003eYes. DFINW, DFIN, and DFINB share the same Diversity Fin antenna element with identical RF performance. The difference is mounting hardware: DFIN = stand-mount with padded cover (touring), DFINB = black wall-mount (permanent, dark), DFINW = white wall-mount (permanent, light).\u003c\/p\u003e\n\u003ch3\u003eCan I add a DFINW to an existing antenna distribution system?\u003c\/h3\u003e\n\u003cp\u003eYes. The DFINW's standard BNC A and B outputs connect to any compatible antenna distribution system, including DISTRO4, DISTRO5 HDR, DISTRO9 HDR, and third-party distributors.\u003c\/p\u003e\n\u003ch3\u003eIs the DFINW suitable for ceiling mounting?\u003c\/h3\u003e\n\u003cp\u003eThe DFINW is designed for wall mounting. For ceiling installations, the Diversity Architectural Antenna (D-ARC\/D-ARCB) is designed specifically for both wall and ceiling mounting.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the DFINW?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381799660,"sku":"DFINW","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-dfinw-rf-venue-diversity-fin-antenna-with-wall-mount-bracket-for-wireless-microphone-systems-white-470-to-698-mhz-creation-networks-37341.jpg?v=1793683962"},{"product_id":"audio-technica-dfinwdistro4-distro4-4-channel-antenna-distributor-diversity-fin-white-install-antenna-2-25-rg8x-coaxial-cables-all-dc-and-rf-jumpers-included-wall-mounting-hardware-included","title":"RF Venue DFINWDISTRO4 – 4-Channel Wireless Mic Pack, White Wall-Mount Fin Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue DFINWDISTRO4 is a complete 4-channel wireless microphone antenna distribution pack featuring the white wall-mount Diversity Fin antenna (DFINW), the DISTRO4 4-channel UHF distribution system, and all required white cables. Built for permanent AV installations in light-colored environments, this pack provides professional wireless microphone antenna performance with a wall-mounted white antenna finish. The Diversity Fin's patented cross-polarized design delivers 120-degree horizontal coverage with typical range over 300 feet, and the DISTRO4 distributes the antenna signal to up to four wireless receivers with 12VDC power output.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DFINWDISTRO4 is the white permanent-install version of the Diversity Fin DISTRO4 pack. It includes the DFINW — the white wall-mount version of the Diversity Fin — with a white wall-mount bracket for fixed installations, paired with the DISTRO4 active antenna distributor and a complete set of white cables. The DFINW is functionally identical to the DFINB and DFIN, using the same patented orthogonal polarization diversity element: an LPDA for vertical polarization and a dipole for horizontal, providing both A and B diversity feeds from a single installed antenna unit.\u003c\/p\u003e\n\u003cp\u003eCoverage is 120 degrees horizontal with typical range exceeding 300 feet, suited for stage-wing or front-of-house placement aimed at the performance area. The DISTRO4 is a 1RU active rack-mount antenna distribution system with 12VDC receiver power distribution to up to four connected receivers and a cascade output for system expansion. Included cables are white to match the antenna: two 25-foot white RG8X BNC cables, ten 1.5-foot BNC jumpers, four DC jumpers, and an AC power cord.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-dfinwdistro4-rf-venue-4-channel-antenna-distributor-with-white-diversity-fin-antenna-and-cables-bundle-creation-networks-81300.jpg?v=1757903723\" alt=\"RF Venue DFINWDISTRO4 – 4-Channel Wireless Mic Pack, White Wall-Mount Fin Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eCompatible with all UHF wireless microphone receivers in the 470–698 MHz range, the DFINWDISTRO4 is ideal for houses of worship, conference rooms, auditoriums, and corporate spaces where white AV hardware is specified.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Wall-Mount Diversity Fin Antenna\u003c\/strong\u003e — DFINW permanent-install version with white wall-mount bracket for clean fixed installations in light-colored environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented Cross-Polarized Design\u003c\/strong\u003e — LPDA and dipole at 90° in one unit; provides both A and B diversity feeds without two separate antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120° Horizontal, 300+ Feet Range\u003c\/strong\u003e — Directional pattern for stage-wing or FOH placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDISTRO4 Included\u003c\/strong\u003e — Active 1RU 4-channel antenna distributor with 12VDC power and cascade output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete White Cable Package\u003c\/strong\u003e — Two 25' white RG8X cables, 10 x 1.5' BNC jumpers, 4 x DC jumpers, and AC power cord.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Antenna Replaces Two\u003c\/strong\u003e — One DFINW delivers both A and B diversity feeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascade Output\u003c\/strong\u003e — DISTRO4 supports additional distribution units for larger channel counts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with all UHF wireless microphone receivers in the 470–698 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship with white interior walls and permanent wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eConference room and boardroom wireless audio installations\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center permanent AV systems\u003c\/li\u003e\n\u003cli\u003eGovernment and corporate meeting spaces with white hardware specifications\u003c\/li\u003e\n\u003cli\u003eTraining room and multi-purpose room fixed AV installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(1) DFINW Diversity Fin Antenna (white wall-mount), (1) DISTRO4, (2) 25' White RG8X BNC Cables, (10) 1.5' BNC Jumpers, (4) DC Jumpers, (1) AC Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite wall-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120° horizontal, 300+ feet range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Outputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA and B diversity (dual BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO4 Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 receivers (plus cascade)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–698 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Power Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12VDC to up to 4 receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between DFINWDISTRO4, DFINDISTRO4, and DFINBDISTRO4?\u003c\/h3\u003e\n\u003cp\u003eAll three include the DISTRO4 and the Diversity Fin antenna element with identical RF performance. DFINWDISTRO4 has a white wall-mount bracket (permanent install, light environments), DFINBDISTRO4 has a black wall-mount bracket (permanent install, dark environments), and DFINDISTRO4 has a stand-mount bracket with padded cover (touring\/flexible deployment).\u003c\/p\u003e\n\u003ch3\u003eHow does DFINWDISTRO4 differ from DFINWD5?\u003c\/h3\u003e\n\u003cp\u003eDFINWDISTRO4 includes the DISTRO4 (4-channel, 1RU) supporting up to four channels. DFINWD5 includes the DISTRO5 HDR (5-channel, half-rack) with HDR technology, supporting five channels with improved dynamic range.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the DFINWDISTRO4?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381865196,"sku":"DFINWDISTRO4","price":1529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-dfinwdistro4-rf-venue-4-channel-antenna-distributor-with-white-diversity-fin-antenna-and-cables-bundle-creation-networks-81300.jpg?v=1793683963"},{"product_id":"audio-technica-distro9hdr-one-distro9-hdr-9-channel-antenna-distribution-system-connects-up-to-9-receivers-vhf-and-uhf-in-1ru","title":"RF Venue DISTRO9HDR – 9-Channel UHF Antenna Distribution System","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue DISTRO9HDR is a 9-channel multi-zone antenna distribution system for professional wireless microphone deployments. In a single 1RU rackmount package, it provides 9 low-noise diversity output channels across VHF, UHF, and 900 MHz frequency bands with over 60 dB of dynamic range. Two zone antenna inputs support large venues or multi-room installations from a single unit, and a second DISTRO9 HDR can be cascaded for up to 17 channels in 2RU. ETL listed, the DISTRO9 HDR is the standard choice for specifying engineers, government facilities, and commercial AV integrators requiring certified antenna distribution infrastructure.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DISTRO9 HDR replaces passive splitter-based antenna distribution with an active system using proprietary low-noise amplifier circuitry and a \"divide by three\" gain structure. Where passive splitters introduce noise figure degradation with each output, the DISTRO9 HDR’s active design maintains over 60 dB of dynamic range across all 9 output channels simultaneously. Third-order intercept points of 15 dBm at VHF and 20+ dBm at UHF provide substantial headroom for dense multi-channel wireless deployments where intermodulation is a concern.\u003c\/p\u003e\n\u003cp\u003eThe two zone antenna inputs allow antennas at different physical locations within a venue to feed the same distribution system. This is particularly useful in large sanctuaries, conference centers, and multi-room facilities where a single antenna position cannot provide adequate coverage across the entire space. Both zone inputs accept standard 50-ohm BNC connections from any directional or omnidirectional antenna.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-distro9hdr-hdr-multi-zone-antenna-distribution-system-creation-networks-55647.jpg?v=1757903723\" alt=\"RF Venue DISTRO9HDR – 9-Channel UHF Antenna Distribution System - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-distro9hdr-hdr-multi-zone-antenna-distribution-system-creation-networks-33917.jpg?v=1757903724\" alt=\"RF Venue DISTRO9HDR – 9-Channel UHF Antenna Distribution System - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eDC power over coax simplifies wireless receiver rack cabling: the DISTRO9 HDR can supply 12 VDC at up to 100 mA to remotely powered antennas and delivers DC power to wireless receivers via the included DC power cable kit, eliminating individual wall warts at each receiver. The unit also supports DC battery input for location sound cart applications, providing flexibility beyond fixed rack installations.\u003c\/p\u003e\n\u003cp\u003eThe DISTRO9 HDR’s frequency range of 50–1000 MHz covers VHF low, VHF high, T-Band, UHF TV band, and 900 MHz — making it compatible with legacy and current wireless systems from all major manufacturers. The 1RU form factor with 480 × 45 × 250 mm dimensions and 2.7 kg weight is appropriate for standard 19-inch AV racks. ETL listing satisfies certification requirements for municipal government, educational, and institutional AV bid specifications.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9-Channel Diversity Distribution\u003c\/strong\u003e — Supports up to 9 wireless microphone receivers from a single antenna pair in 1 RU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver 60 dB Dynamic Range\u003c\/strong\u003e — Active design with proprietary low-noise amplifiers; superior to passive splitter-based systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Zone Antenna Inputs\u003c\/strong\u003e — Connect antennas at different locations for large-space or multi-room coverage from one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50–1000 MHz Coverage\u003c\/strong\u003e — VHF, UHF, T-Band, and 900 MHz support for all professional wireless audio frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascade to 17 Channels\u003c\/strong\u003e — Any output feeds a second DISTRO9 HDR for 17 wireless channels in 2 RU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power Over Coax\u003c\/strong\u003e — Powers compatible remote antennas (12 VDC, 100 mA) and wireless receivers via included DC power cable kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery DC Input\u003c\/strong\u003e — Supports location sound cart applications without AC power at the rack position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eETL Listed\u003c\/strong\u003e — Meets North American electrical safety and compliance certification requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Third-Order Intercept\u003c\/strong\u003e — 15 dBm IIP3 @ VHF; 20+ dBm @ UHF for clean performance in high-channel-count environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouses of worship with multi-channel wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eConference centers and convention halls with distributed wireless RF infrastructure\u003c\/li\u003e\n\u003cli\u003eAuditoriums and performing arts centers requiring professional diversity antenna distribution\u003c\/li\u003e\n\u003cli\u003eGovernment facilities and municipal meeting rooms requiring ETL-certified components\u003c\/li\u003e\n\u003cli\u003eBroadcast studios and television production racks\u003c\/li\u003e\n\u003cli\u003eLocation sound carts for film and television production (via DC battery input)\u003c\/li\u003e\n\u003cli\u003eCorporate boardrooms and training rooms with multi-channel wireless microphone systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50–1000 MHz (VHF, T-Band, UHF, 900 MHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 diversity outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZone Inputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 (4 BNC input connectors total)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRF Output Level (Gain)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e±3 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Connection Isolation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60 dB @ 510 MHz; 80 dB @ 200 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThird Order Intercept (IIP3)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 dBm @ VHF; 20+ dBm @ UHF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDynamic Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRF Input Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4× BNC female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRF Output Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18× BNC female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC over Coax Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 VDC, 100 mA (to remote antennas)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Output (to receivers)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 V, 3 A (via Anderson Power Pole)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput AC Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–240 VAC, 50\/60 Hz, 2 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFuse\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT3.15A \/ 250V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e480 × 45 × 250 mm (19\" × 1.8\" × 9.8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.7 kg (5.95 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1RU rackmount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eETL listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCascade\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 17 channels with second DISTRO9 HDR (2 RU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow is the DISTRO9 HDR different from a passive antenna splitter?\u003c\/h3\u003e\n\u003cp\u003eA passive splitter divides the antenna signal among outputs, with each output receiving a fraction of the input signal and a proportional increase in noise figure. The DISTRO9 HDR uses active amplification with a proprietary gain structure to maintain full dynamic range (\u0026gt;60 dB) across all 9 outputs simultaneously. In high-channel-count wireless deployments, this difference is significant: passive splitting often causes dropout issues that the DISTRO9 HDR is specifically engineered to avoid.\u003c\/p\u003e\n\u003ch3\u003eCan the DISTRO9 HDR work with antennas from any manufacturer?\u003c\/h3\u003e\n\u003cp\u003eYes. The four BNC female antenna inputs accept 50-ohm signals from any professional antenna, including RF Venue’s Diversity Fin, Diversity Architectural Antenna, Diversity Omni, CP Beam, or any third-party directional or omnidirectional antenna compatible with the 50–1000 MHz operating range.\u003c\/p\u003e\n\u003ch3\u003eHow does cascading to a second DISTRO9 HDR work?\u003c\/h3\u003e\n\u003cp\u003eConnect any of the 18 BNC output connectors on the first DISTRO9 HDR to an antenna input on a second DISTRO9 HDR. The first unit passes the signal with appropriate gain to the second unit, which distributes it across its own 9 outputs. This provides up to 17 total wireless microphone channels (using both units’ outputs, minus one connection port) in 2 RU of rack space from a single antenna pair.\u003c\/p\u003e\n\u003ch3\u003eCan the DISTRO9 HDR power wireless receivers?\u003c\/h3\u003e\n\u003cp\u003eYes. The included DC power cable kit (Anderson Power Pole connections) allows the DISTRO9 HDR to deliver 12 VDC to compatible wireless receivers at each output position, eliminating individual power adapters for each receiver in the rack.\u003c\/p\u003e\n\u003ch3\u003eIs the DISTRO9 HDR suitable for location sound applications?\u003c\/h3\u003e\n\u003cp\u003eYes. The unit accepts DC battery input in addition to AC power, making it usable on location sound carts and mobile production rigs where AC power is not available at the equipment position.\u003c\/p\u003e\n\u003ch3\u003eWhat does ETL listing mean for AV system specifications?\u003c\/h3\u003e\n\u003cp\u003eETL listing (Electrical Testing Laboratories) is an independent North American electrical safety certification equivalent to UL listing. Many government, educational, and institutional facility specifications require ETL or UL listed components. The DISTRO9 HDR’s ETL listing satisfies these requirements for bid-spec commercial AV projects.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty covers this product?\u003c\/h3\u003e\n\u003cp\u003eRF Venue products are covered by a manufacturer warranty. Contact Creation Networks at creationnetworks.net for warranty and support.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381897964,"sku":"DISTRO9HDR","price":2039.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-distro9hdr-hdr-multi-zone-antenna-distribution-system-creation-networks-55647.jpg?v=1793683964"},{"product_id":"audio-technica-d-omni-the-diversity-omni-operates-between-470-and-616-mhz-and-features-two-antennas-on-a-single-stand-capturing-both-vertically-and-horizontally-polarized-signals-to-help-eliminate-the-most-common-signal-dropouts","title":"RF Venue D-OMNI – Diversity Omni Antenna for Wireless Microphones","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue D-OMNI is a dual-element omnidirectional diversity antenna designed for wireless microphone deployments requiring 360-degree coverage. Building on the polarization diversity principle of the Diversity Fin, the D-OMNI combines two antenna elements on a single stand to capture both vertical and horizontal polarizations from all directions simultaneously. With a 360-degree coverage pattern and typical range up to 100 feet from the antenna's central placement point, the D-OMNI suits conference rooms, multi-zone deployments, smaller spaces, and outdoor environments where a directional antenna cannot be effectively aimed.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eWhere the Diversity Fin and Diversity Architectural Antenna are directional — providing broad-sector coverage focused toward a defined stage or performance zone — the D-OMNI provides omnidirectional coverage from a centrally-placed antenna. This makes it the right tool for situations where talent moves throughout the entire room, multi-zone setups where a single antenna must cover activity in multiple adjacent areas, or outdoor applications where the transmitter's position relative to the antenna is unpredictable.\u003c\/p\u003e\n\u003cp\u003eThe D-OMNI's two antenna elements are mounted on a single stand assembly and connect to separate A and B BNC output jacks, feeding into a diversity receiver or antenna distribution system (DISTRO4, DISTRO5 HDR). Placed centrally in the coverage area, the D-OMNI provides consistent signal from all directions. Coverage is 360 degrees with typical range up to 100 feet from the antenna center. The D-OMNI includes a stand mount and a weather-resistant cover, making it suitable for mild outdoor use as well as indoor deployments.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-d-omni-rf-venue-diversity-omni-antenna-for-uhf-wireless-mic-systems-470-to-616-mhz-creation-networks-75314.jpg?v=1757903725\" alt=\"RF Venue D-OMNI – Diversity Omni Antenna for Wireless Microphones - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eCompatible with all major UHF wireless microphone receivers in the 470–616 MHz range, the D-OMNI is suitable for conference rooms, huddle spaces, houses of worship with roaming talent, multi-purpose rooms, and outdoor event spaces. For complete distribution packs including the D-OMNI, see the D-OMNIDISTRO4 (4-channel with DISTRO4) or D-OMNID5 (5-channel with DISTRO5 HDR).\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Omnidirectional Coverage\u003c\/strong\u003e — Full-circle pattern for environments where talent moves throughout the space or cannot be positioned in a defined zone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Polarization Diversity\u003c\/strong\u003e — Two elements capture vertical and horizontal polarizations simultaneously, reducing orientation-based dropouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentrally-Placed Deployment\u003c\/strong\u003e — Designed to be placed at the center of the coverage area for uniform signal distribution in all directions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 100 Feet Range\u003c\/strong\u003e — Typical coverage radius from the antenna's central placement point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-Resistant Cover Included\u003c\/strong\u003e — Suitable for mild outdoor applications and indoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand Mount Included\u003c\/strong\u003e — Deploys on a standard stand or surface for flexible central placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with all major UHF wireless microphone receivers in the 470–616 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConference room and huddle room with roaming presenters\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room and all-hands room wireless audio systems\u003c\/li\u003e\n\u003cli\u003eHouse of worship with talent moving throughout the space\u003c\/li\u003e\n\u003cli\u003eOutdoor event spaces where directional antenna aiming is impractical\u003c\/li\u003e\n\u003cli\u003eMulti-zone wireless microphone systems requiring central antenna placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eD-OMNI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e360° omnidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 100 feet from center\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA and B diversity (dual BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–616 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded Accessories\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStand mount, weather-resistant cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhen should I choose D-OMNI over the DFIN or D-ARC?\u003c\/h3\u003e\n\u003cp\u003eChoose D-OMNI when performers or speakers move throughout the entire room without a defined stage direction, or when a central antenna placement is required for multi-zone coverage. Choose DFIN or D-ARC when talent is in a defined zone and the antenna can be aimed for greater directional range (300+ feet vs. 100 feet for D-OMNI).\u003c\/p\u003e\n\u003ch3\u003eWhat is the coverage radius of the D-OMNI?\u003c\/h3\u003e\n\u003cp\u003eTypical range is up to 100 feet from the antenna's central placement point. Range depends on transmitter power level, the RF noise floor, and the number of competing signals in the environment.\u003c\/p\u003e\n\u003ch3\u003eDoes the orientation of the D-OMNI matter?\u003c\/h3\u003e\n\u003cp\u003eNo. The 360-degree omnidirectional pattern means the antenna can be oriented in any direction without affecting coverage.\u003c\/p\u003e\n\u003ch3\u003eCan the D-OMNI be used outdoors?\u003c\/h3\u003e\n\u003cp\u003eThe D-OMNI includes a weather-resistant cover and is suitable for mild outdoor use. For exposure to significant rain, wind, or harsh environmental conditions, verify the installation design with your system integrator.\u003c\/p\u003e\n\u003ch3\u003eWhat distribution systems are compatible with the D-OMNI?\u003c\/h3\u003e\n\u003cp\u003eThe D-OMNI's BNC A and B outputs connect to any compatible distribution system including RF Venue DISTRO4, DISTRO5 HDR, DISTRO9 HDR, and third-party distributors. For complete bundles, see D-OMNIDISTRO4 or D-OMNID5.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the D-OMNI?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381930732,"sku":"D-OMNI","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-d-omni-rf-venue-diversity-omni-antenna-for-uhf-wireless-mic-systems-470-to-616-mhz-creation-networks-75314.jpg?v=1757903725"},{"product_id":"audio-technica-d-omnidistro4-rf-venue-bundle-includes-distro4™-four-channel-antenna-distribution-system-d-omni-antenna-black-two-25-rg8x-coaxial-cables-includes-all-dc-and-rf-jumpers","title":"RF Venue D-OMNIDISTRO4 – 4-Channel Wireless Mic Pack, Diversity Omni Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue D-OMNIDISTRO4 is a complete 4-channel wireless microphone antenna distribution pack featuring the Diversity Omni antenna, the DISTRO4 4-channel UHF distribution system, and all required cables. This omnidirectional wireless microphone upgrade pack is designed for installations requiring 360-degree coverage — conference rooms, huddle spaces, multi-zone environments, and any venue where performers or speakers move throughout the space rather than staying in a defined stage area. The Diversity Omni provides dual-polarization coverage with typical range up to 100 feet from center, supported by the DISTRO4's 4-channel active antenna distribution.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe D-OMNIDISTRO4 bundles the Diversity Omni antenna with the DISTRO4 active distributor and a complete cable set. The Diversity Omni uses two antenna elements — one for vertical polarization and one for horizontal — on a single stand, providing 360-degree omnidirectional coverage with dual-polarization diversity. Placed centrally in the coverage area, the D-OMNI covers all directions simultaneously, making it ideal for environments where a defined stage direction cannot be established or where performers move freely throughout the room.\u003c\/p\u003e\n\u003cp\u003eThe DISTRO4 is a 1RU active rack-mount antenna distribution system that accepts the D-OMNI's A and B diversity outputs and distributes the signal to up to four wireless receiver channels with 12VDC power distribution. The cascade output supports additional distributor units for larger systems. The bundle includes two 25-foot BNC coaxial cables, ten 1.5-foot BNC jumpers, four DC jumpers, and an AC power cord for a complete installation.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-d-omnidistro4-rf-venue-4-channel-wireless-microphone-omni-upgrade-pack-creation-networks-39211.jpg?v=1757903726\" alt=\"RF Venue D-OMNIDISTRO4 – 4-Channel Wireless Mic Pack, Diversity Omni Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eCompatible with all major UHF wireless microphone receivers in the 470–616 MHz range, the D-OMNIDISTRO4 suits conference rooms, huddle spaces, houses of worship with roaming presenters, multi-zone wireless microphone systems, and any application requiring centrally-placed omnidirectional antenna coverage.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Omnidirectional Diversity Antenna\u003c\/strong\u003e — Diversity Omni provides full-circle dual-polarization coverage; ideal for environments where talent moves throughout the space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentrally-Placed Coverage\u003c\/strong\u003e — Antenna is positioned in the center of the coverage area for uniform signal distribution in all directions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical Range up to 100 Feet\u003c\/strong\u003e — Covers small-to-medium rooms from a central placement point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDISTRO4 Included\u003c\/strong\u003e — Active 1RU 4-channel antenna distributor with 12VDC power and cascade output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12VDC Power Distribution\u003c\/strong\u003e — Powers up to four wireless receivers via DC jumper cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Cable Package\u003c\/strong\u003e — Two 25' BNC cables, 10 x 1.5' BNC jumpers, 4 x DC jumpers, and AC power cord.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Zone Friendly\u003c\/strong\u003e — Designed for multi-zone setups where a single antenna provides coverage across adjacent areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with all major UHF wireless microphone receivers in the 470–616 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConference room and huddle room with roaming presenters\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room and all-hands room wireless audio systems\u003c\/li\u003e\n\u003cli\u003eHouse of worship with talent moving throughout the space\u003c\/li\u003e\n\u003cli\u003eMulti-zone wireless microphone installations\u003c\/li\u003e\n\u003cli\u003eTraining room and breakout space wireless audio deployments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(1) D-OMNI Diversity Omni Antenna, (1) DISTRO4, (2) 25' RG8X BNC Cables, (10) 1.5' BNC Jumpers, (4) DC Jumpers, (1) AC Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e360° omnidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 100 feet from center\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Outputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA and B diversity (dual BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO4 Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 receivers (plus cascade)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–616 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Power Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12VDC to up to 4 receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhen should I choose D-OMNIDISTRO4 over DFINDISTRO4 or D-ARCDISTRO4?\u003c\/h3\u003e\n\u003cp\u003eChoose the D-OMNIDISTRO4 when performers or speakers move throughout the entire room without a defined stage direction. The 360-degree omni pattern covers all directions from a central point. Use DFINDISTRO4 or D-ARCDISTRO4 when talent is in a defined zone and a directional antenna can be aimed for greater range and signal strength.\u003c\/p\u003e\n\u003ch3\u003eWhat is the coverage range of the Diversity Omni antenna?\u003c\/h3\u003e\n\u003cp\u003eTypical coverage is up to 100 feet from the antenna's central placement point. Range depends on the RF environment, transmitter power, and number of competing signals.\u003c\/p\u003e\n\u003ch3\u003eHow does this pack compare to the D-OMNID5?\u003c\/h3\u003e\n\u003cp\u003eD-OMNIDISTRO4 includes the DISTRO4 (4-channel, 1RU) for up to four channels. D-OMNID5 includes the DISTRO5 HDR (5-channel, half-rack) with HDR technology, supporting five channels with improved dynamic range.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the D-OMNIDISTRO4?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410381963500,"sku":"D-OMNIDISTRO4","price":1529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-d-omnidistro4-rf-venue-4-channel-wireless-microphone-omni-upgrade-pack-creation-networks-39211.jpg?v=1793683967"},{"product_id":"audio-technica-rg8x10-low-loss-rf-venue-rg8x-coaxial-cable-50-ohm-double-shielded-braid-over-foil-design-bnc-male-connectors-10-feet","title":"RF Venue RG8X10 – 10 ft Low-Loss RG8X Coaxial Cable, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue RG8X10 is a 10-foot RG8X coaxial cable for short rack-to-antenna connections and in-rack routing in professional wireless audio systems. At 10 feet, it is well suited for connecting an antenna mounted directly above or beside the equipment rack, or for short runs within a technical production area where the antenna and receiver are in close proximity.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe RG8X10 is used to connect wireless microphone and IEM antennas to receiver racks over very short distances, including in-rack and near-rack scenarios. Double-shielded construction — braid over foil — suppresses RF interference ingress and provides the cable with the durability to handle repeated installation and removal in production environments. At 10 feet, RG8X cable loss is negligible for all professional wireless system configurations. Each cable is manufactured in the USA and QC tested on calibrated Agilent network analyzers before shipment. BNC male connectors on both ends are compatible with the standard antenna inputs on professional wireless receivers and antenna distribution equipment. The 50Ω impedance is matched throughout for wireless microphone and IEM antenna applications.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded Construction\u003c\/strong\u003e — Braid over foil shielding balances low signal loss with flexibility for routing through conduit and cable trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Ω Impedance\u003c\/strong\u003e — Matched impedance for wireless microphone and IEM antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Male Connectors\u003c\/strong\u003e — Both ends terminated with BNC male connectors, the standard for professional wireless audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in USA\u003c\/strong\u003e — Manufactured and QC tested in the USA on calibrated Agilent network analyzers for guaranteed RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Loss\u003c\/strong\u003e — Premium RG8X construction minimizes signal attenuation over the cable run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRG8X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 ft (~3 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC Male (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShield\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDouble shielded (braid over foil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJacket Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410391531756,"sku":"RG8X10","price":83.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rg8x10-rf-venue-rg8x-low-loss-coaxial-antenna-cable-black-10-creation-networks-42443.jpg?v=1757903774"},{"product_id":"audio-technica-rg8x100-low-loss-rf-venue-rg8x-coaxial-cable-50-ohm-double-shielded-braid-over-foil-design-bnc-male-connectors-100-feet","title":"RF Venue RG8X100 – 100 ft Low-Loss RG8X Coaxial Cable, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue RG8X100 is a 100-foot RG8X coaxial cable for medium-to-long antenna feed runs in mid-size and large venues. At 100 feet, it covers a wide range of fixed installations — from balcony-mounted antennas to rack positions at the back of a room — without requiring an in-line amplifier in most applications. It is a practical choice for integrators specifying antenna cable runs in conference centers, performing arts venues, and houses of worship.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe RG8X100 connects wireless microphone and IEM antennas to receiver racks across medium-to-long runs typical of mid-size venue installations. Double-shielded construction — braid over foil — suppresses RF interference ingress while keeping the cable pliable enough for conduit and cable tray routing. At 100 feet, RG8X cable attenuation remains within acceptable limits for most professional wireless systems without amplification, making this a versatile option across many installation types. Each cable is manufactured in the USA and QC tested on calibrated Agilent network analyzers before leaving the facility. BNC male connectors on both ends are compatible with the standard inputs found on professional wireless receivers and antenna distribution equipment. The 50Ω impedance matches the nominal impedance of wireless microphone and IEM antenna systems.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded Construction\u003c\/strong\u003e — Braid over foil shielding balances low signal loss with flexibility for routing through conduit and cable trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Ω Impedance\u003c\/strong\u003e — Matched impedance for wireless microphone and IEM antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Male Connectors\u003c\/strong\u003e — Both ends terminated with BNC male connectors, the standard for professional wireless audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in USA\u003c\/strong\u003e — Manufactured and QC tested in the USA on calibrated Agilent network analyzers for guaranteed RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Loss\u003c\/strong\u003e — Premium RG8X construction minimizes signal attenuation over the cable run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRG8X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 ft (~30 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC Male (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShield\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDouble shielded (braid over foil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJacket Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410391564524,"sku":"RG8X100","price":346.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rg8x100-rf-venue-rg8x-low-loss-coaxial-antenna-cable-black-100-creation-networks-96773.jpg?v=1757903775"},{"product_id":"audio-technica-rg8x15-low-loss-rf-venue-rg8x-coaxial-cable-50-ohm-double-shielded-braid-over-foil-design-bnc-male-connectors-15-feet","title":"RF Venue RG8X15 – 15 ft Low-Loss RG8X Coaxial Cable, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue RG8X15 is a 15-foot RG8X coaxial cable for short antenna feed connections in rack-mount wireless audio systems. At 15 feet, it is suited for connecting a nearby wall or ceiling-mounted antenna to a receiver rack in the same room, or for short lateral runs within a technical production area. This length is commonly used when an antenna can be positioned close to the rack to minimize cable length and signal loss.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe RG8X15 connects wireless microphone and IEM antennas to receiver racks over short runs where the antenna is positioned near the equipment. Double-shielded construction — braid over foil — suppresses RF interference ingress while keeping the cable easy to dress and manage in tight production environments. At 15 feet, RG8X cable attenuation is negligible for all professional wireless system configurations. Each cable is manufactured in the USA and QC tested on calibrated Agilent network analyzers before shipment. BNC male connectors on both ends match the standard antenna inputs on professional wireless receivers and antenna distribution units. The 50Ω impedance is matched throughout for wireless microphone and IEM antenna feed applications.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded Construction\u003c\/strong\u003e — Braid over foil shielding balances low signal loss with flexibility for routing through conduit and cable trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Ω Impedance\u003c\/strong\u003e — Matched impedance for wireless microphone and IEM antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Male Connectors\u003c\/strong\u003e — Both ends terminated with BNC male connectors, the standard for professional wireless audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in USA\u003c\/strong\u003e — Manufactured and QC tested in the USA on calibrated Agilent network analyzers for guaranteed RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Loss\u003c\/strong\u003e — Premium RG8X construction minimizes signal attenuation over the cable run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRG8X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 ft (~4.6 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC Male (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShield\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDouble shielded (braid over foil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJacket Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410391597292,"sku":"RG8X15","price":104.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rg8x15-rf-venue-rg8x-low-loss-coaxial-antenna-cable-black-15-creation-networks-33501.jpg?v=1757903776"},{"product_id":"audio-technica-rg8x150-low-loss-rf-venue-rg8x-coaxial-cable-50-ohm-double-shielded-braid-over-foil-design-bnc-male-connectors-150-feet","title":"RF Venue RG8X150 – 150 ft Low-Loss RG8X Coaxial Cable, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue RG8X150 is a 150-foot RG8X coaxial cable for long-distance antenna feed runs in large venues and fixed installations. It suits distributed antenna systems where a significant distance separates the antenna position from the receiver rack. This length covers most large-room installations without requiring an in-line amplifier in typical wireless microphone frequency ranges.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe RG8X150 is used to connect wireless microphone and IEM antennas to receiver racks across long cable runs in spaces such as auditoriums, houses of worship, and convention halls. Double-shielded construction — braid over foil — reduces RF interference ingress while keeping the cable flexible enough to route through conduit and cable trays. At 150 feet, signal loss is present but manageable for most wireless systems operating in standard UHF frequency bands; for systems with high sensitivity requirements or marginal signal environments, an in-line amplifier may be warranted. Each cable is manufactured in the USA and QC tested on calibrated Agilent network analyzers before shipment. BNC male connectors on both ends match the standard termination used across professional wireless audio receivers and antenna distribution units. The cable’s 50Ω impedance is matched throughout for wireless microphone and IEM antenna feed applications.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded Construction\u003c\/strong\u003e — Braid over foil shielding balances low signal loss with flexibility for routing through conduit and cable trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Ω Impedance\u003c\/strong\u003e — Matched impedance for wireless microphone and IEM antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Male Connectors\u003c\/strong\u003e — Both ends terminated with BNC male connectors, the standard for professional wireless audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in USA\u003c\/strong\u003e — Manufactured and QC tested in the USA on calibrated Agilent network analyzers for guaranteed RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Loss\u003c\/strong\u003e — Premium RG8X construction minimizes signal attenuation over the cable run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRG8X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e150 ft (~46 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC Male (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShield\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDouble shielded (braid over foil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJacket Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410391793900,"sku":"RG8X150","price":461.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rg8x150-rf-venue-rg8x-low-loss-coaxial-antenna-cable-black-150-creation-networks-49490.jpg?v=1757903776"},{"product_id":"audio-technica-rg8x200-low-loss-rf-venue-rg8x-coaxial-cable-50-ohm-double-shielded-braid-over-foil-design-bnc-male-connectors-200-feet","title":"RF Venue RG8X200 – 200 ft Low-Loss RG8X Coaxial Cable, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue RG8X200 is a 200-foot RG8X coaxial cable designed for long-distance antenna feed runs in large venues. It is the longest single cable in the RF Venue RG8X lineup, making it suitable for distributed antenna systems where the antenna must be positioned far from the receiver rack. At this length, signal loss is a factor — pairing this cable with an RF Venue ILAMP-ACT in-line amplifier is recommended to maintain signal integrity.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe RG8X200 connects wireless microphone and IEM antenna systems to receiver racks across long cable runs in large fixed-installation environments such as auditoriums, arenas, and convention centers. The cable uses double-shielded construction — braid over foil — to minimize RF interference ingress while maintaining the flexibility needed for routing through conduit and cable trays. At 200 feet, coaxial cable attenuation becomes significant; RF Venue recommends using the ILAMP-ACT in-line amplifier to compensate for signal loss at this distance. Every cable is manufactured in the USA and QC tested on calibrated Agilent network analyzers to verify RF performance before shipment. BNC male connectors on both ends ensure compatibility with the standard termination used across professional wireless audio equipment. The 50Ω impedance is matched to wireless microphone and IEM antenna distribution systems throughout.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded Construction\u003c\/strong\u003e — Braid over foil shielding balances low signal loss with flexibility for routing through conduit and cable trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Ω Impedance\u003c\/strong\u003e — Matched impedance for wireless microphone and IEM antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Male Connectors\u003c\/strong\u003e — Both ends terminated with BNC male connectors, the standard for professional wireless audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in USA\u003c\/strong\u003e — Manufactured and QC tested in the USA on calibrated Agilent network analyzers for guaranteed RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Loss\u003c\/strong\u003e — Premium RG8X construction minimizes signal attenuation over the cable run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRG8X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 ft (~61 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC Male (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShield\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDouble shielded (braid over foil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJacket Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410392154348,"sku":"RG8X200","price":524.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rg8x200-rf-venue-rg8x-low-loss-coaxial-antenna-cable-black-200-creation-networks-15563.jpg?v=1757903778"},{"product_id":"audio-technica-rg8x25-low-loss-rf-venue-rg8x-coaxial-cable-50-ohm-double-shielded-braid-over-foil-design-bnc-male-connectors-25-feet","title":"RF Venue RG8X25 – 25 ft Low-Loss RG8X Coaxial Cable, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue RG8X25 is a 25-foot RG8X coaxial cable for shorter antenna-to-rack runs in smaller venues and equipment rooms. At 25 feet, it is appropriate for installations where the antenna is mounted close to the equipment rack — such as a wall bracket in a small conference room or a nearby ceiling mount in a compact presentation space. It is also used as a secondary cable in larger distributed antenna systems where a shorter drop or lateral run is needed.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe RG8X25 connects wireless microphone and IEM antennas to receiver racks over short runs in small-to-mid-size installations. Double-shielded construction — braid over foil — minimizes RF interference ingress while keeping the cable easy to route through wall conduit or surface raceways. At 25 feet, RG8X cable loss is negligible for virtually all professional wireless systems, with no amplification required. Each cable is manufactured in the USA and QC tested on calibrated Agilent network analyzers before shipment. BNC male connectors on both ends are compatible with standard professional wireless receivers and antenna distribution equipment. The 50Ω impedance is matched throughout for wireless microphone and IEM antenna feed applications.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded Construction\u003c\/strong\u003e — Braid over foil shielding balances low signal loss with flexibility for routing through conduit and cable trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Ω Impedance\u003c\/strong\u003e — Matched impedance for wireless microphone and IEM antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Male Connectors\u003c\/strong\u003e — Both ends terminated with BNC male connectors, the standard for professional wireless audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in USA\u003c\/strong\u003e — Manufactured and QC tested in the USA on calibrated Agilent network analyzers for guaranteed RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Loss\u003c\/strong\u003e — Premium RG8X construction minimizes signal attenuation over the cable run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRG8X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25 ft (~7.6 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC Male (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShield\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDouble shielded (braid over foil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJacket Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410392187116,"sku":"RG8X25","price":136.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rg8x25-rf-venue-rg8x-low-loss-coaxial-antenna-cable-black-25-creation-networks-59205.jpg?v=1757903784"},{"product_id":"audio-technica-rg8x5-low-loss-rf-venue-rg8x-coaxial-cable-50-ohm-double-shielded-braid-over-foil-design-bnc-male-connectors-5-feet","title":"RF Venue RG8X5 – 5 ft Low-Loss RG8X Coaxial Cable, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue RG8X5 is a 5-foot RG8X coaxial cable for very short in-rack connections and patch applications in professional wireless audio systems. At 5 feet, it is the go-to length for connecting antenna distribution units to rack-mount receivers within the same rack frame, or for short patch runs where minimal cable length is preferred to reduce clutter and signal path complexity.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe RG8X5 connects antenna distribution outputs to wireless receiver inputs within a rack, or handles short patch connections in situations where a longer cable would be impractical. Double-shielded construction — braid over foil — provides RF interference suppression even in dense rack environments where multiple wireless systems and other RF equipment are in close proximity. At 5 feet, cable attenuation is negligible. Each cable is manufactured in the USA and QC tested on calibrated Agilent network analyzers before shipment. BNC male connectors on both ends are compatible with the standard antenna inputs used on professional wireless receivers and antenna distribution systems. The 50Ω impedance is matched throughout for wireless microphone and IEM antenna feed applications.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded Construction\u003c\/strong\u003e — Braid over foil shielding balances low signal loss with flexibility for routing through conduit and cable trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Ω Impedance\u003c\/strong\u003e — Matched impedance for wireless microphone and IEM antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Male Connectors\u003c\/strong\u003e — Both ends terminated with BNC male connectors, the standard for professional wireless audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in USA\u003c\/strong\u003e — Manufactured and QC tested in the USA on calibrated Agilent network analyzers for guaranteed RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Loss\u003c\/strong\u003e — Premium RG8X construction minimizes signal attenuation over the cable run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRG8X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 ft (~1.5 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC Male (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShield\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDouble shielded (braid over foil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJacket Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410392252652,"sku":"RG8X5","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rg8x5-low-loss-rf-venue-rg8x-coaxial-cable-50-ohm-double-shielded-braid-over-foil-design-bnc-male-connectors-5-feet-creation-networks-42587.jpg?v=1757903785"},{"product_id":"audio-technica-rg8x50-low-loss-rf-venue-rg8x-coaxial-cable-50-ohm-double-shielded-braid-over-foil-design-bnc-male-connectors-50-feet","title":"RF Venue RG8X50 – 50 ft Low-Loss RG8X Coaxial Cable, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue RG8X50 is a 50-foot RG8X coaxial cable for standard antenna-to-rack runs in most venue types. At 50 feet, it covers the typical distance from an antenna placement point — a wall bracket, truss drop, or ceiling mount — to a rack at the side of a stage or in a nearby equipment room. This is one of the most common cable lengths specified by integrators for mid-size installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe RG8X50 is used to connect wireless microphone and IEM antennas to receiver racks in conference rooms, corporate boardrooms, theaters, and houses of worship where antenna positions are within a standard run of the equipment rack. Double-shielded construction — braid over foil — suppresses RF interference ingress while maintaining the cable’s flexibility for routing through conduit and cable management. At 50 feet, RG8X cable attenuation is minimal, and no in-line amplification is required for standard professional wireless system configurations. Each cable is manufactured in the USA and QC tested on calibrated Agilent network analyzers before shipment. BNC male connectors on both ends match the antenna input standard used on professional wireless receivers and antenna distribution systems. The 50Ω impedance is matched for wireless microphone and IEM antenna distribution throughout.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded Construction\u003c\/strong\u003e — Braid over foil shielding balances low signal loss with flexibility for routing through conduit and cable trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Ω Impedance\u003c\/strong\u003e — Matched impedance for wireless microphone and IEM antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Male Connectors\u003c\/strong\u003e — Both ends terminated with BNC male connectors, the standard for professional wireless audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in USA\u003c\/strong\u003e — Manufactured and QC tested in the USA on calibrated Agilent network analyzers for guaranteed RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Loss\u003c\/strong\u003e — Premium RG8X construction minimizes signal attenuation over the cable run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRG8X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50 ft (~15 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC Male (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShield\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDouble shielded (braid over foil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJacket Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410392285420,"sku":"RG8X50","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rg8x50-low-loss-rf-venue-rg8x-coaxial-cable-50-ohm-double-shielded-braid-over-foil-design-bnc-male-connectors-50-feet-creation-networks-24560.jpg?v=1757903786"},{"product_id":"audio-technica-rg8x75-low-loss-rf-venue-rg8x-coaxial-cable-50-ohm-double-shielded-braid-over-foil-design-bnc-male-connectors-75-feet","title":"RF Venue RG8X75 – 75 ft Low-Loss RG8X Coaxial Cable, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue RG8X75 is a 75-foot RG8X coaxial cable suited for medium-distance antenna feed runs in mid-size venues. At 75 feet, it handles the gap between shorter in-room runs and longer cross-venue pulls, covering scenarios such as side-stage antenna positions to front-of-house racks or balcony antenna placements in smaller rooms. It is a common specification length for integrators working in corporate boardrooms, hotel ballrooms, and mid-capacity performance spaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe RG8X75 is used to feed wireless microphone and IEM antenna signals from a remote antenna position to a receiver rack over a 75-foot run. Double-shielded construction — braid over foil — limits RF interference ingress while keeping the cable manageable for conduit and cable tray routing. At 75 feet, RG8X cable loss is well within the operational range of professional wireless systems without the need for amplification in most cases. Each cable is manufactured in the USA and QC tested on calibrated Agilent network analyzers to confirm RF performance before shipment. BNC male connectors on both ends are compatible with the antenna inputs on professional wireless receivers and antenna distribution systems. The 50Ω impedance is matched throughout for wireless microphone and IEM antenna feed applications.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded Construction\u003c\/strong\u003e — Braid over foil shielding balances low signal loss with flexibility for routing through conduit and cable trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Ω Impedance\u003c\/strong\u003e — Matched impedance for wireless microphone and IEM antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Male Connectors\u003c\/strong\u003e — Both ends terminated with BNC male connectors, the standard for professional wireless audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in USA\u003c\/strong\u003e — Manufactured and QC tested in the USA on calibrated Agilent network analyzers for guaranteed RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Loss\u003c\/strong\u003e — Premium RG8X construction minimizes signal attenuation over the cable run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRG8X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e75 ft (~23 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC Male (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShield\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDouble shielded (braid over foil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJacket Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410392318188,"sku":"RG8X75","price":293.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rg8x75-low-loss-rf-venue-rg8x-coaxial-cable-50-ohm-double-shielded-braid-over-foil-design-bnc-male-connectors-75-feet-creation-networks-51759.jpg?v=1757903787"},{"product_id":"audio-technica-wrg8x25-white-jacket-25-rg8x-coaxial-cable","title":"RF Venue WRG8X25 – 25 ft Low-Loss RG8X Coaxial Cable, White","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue WRG8X25 is a 25-foot (approximately 7.6 m) 50Ω RG8X coaxial cable with a white jacket and BNC male connectors on both ends. It is intended for shorter antenna runs in white-finished installations — positioning an antenna a discrete distance from the rack without drawing attention to the cable path in architecturally sensitive spaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eAt 25 feet, this cable is appropriate for installations where the equipment rack is relatively close to the antenna position — a small meeting room, a stage wing adjacent to a rack closet, or a short run to an overhead antenna position. The white jacket integrates with white wall surfaces, cable moulding, and ceiling finishes, reducing cable visibility in churches, conference rooms, and hospitality venues where aesthetics are a priority. Double-shielded construction (braid over foil) maintains RF isolation across the 25-foot length, well within the operating range of all standard wireless microphone and IEM antenna distribution systems. All technical specifications — 50Ω impedance, BNC male terminations, double shielding, USA manufacture — are identical to the black jacket RG8X series; the white jacket is the only difference. The cable is manufactured in the USA and QC tested on calibrated Agilent network analyzers before shipment. At 25 feet, signal loss is minimal and no supplemental amplification is required in any standard wireless system configuration.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded Construction\u003c\/strong\u003e — Braid over foil shielding balances low signal loss with flexibility for routing through conduit and cable trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Ω Impedance\u003c\/strong\u003e — Matched impedance for wireless microphone and IEM antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Male Connectors\u003c\/strong\u003e — Both ends terminated with BNC male connectors, the standard for professional wireless audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in USA\u003c\/strong\u003e — Manufactured and QC tested in the USA on calibrated Agilent network analyzers for guaranteed RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Jacket\u003c\/strong\u003e — Clean white finish for installations requiring low-visibility cable routing in bright or white-finished rooms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;font-size:0.95em;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background:#f4f4f4;\"\u003e\n\u003cth style=\"text-align:left;padding:8px;border:1px solid #ddd;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px;border:1px solid #ddd;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eWRG8X25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCable Type\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eRG8X Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLength\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e25 ft (~7.6 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eImpedance\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eConnectors\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eBNC Male (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eShield\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eDouble shielded (braid over foil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eJacket Color\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eQC Testing\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCalibrated Agilent network analyzers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410393333996,"sku":"WRG8X25","price":136.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-wrg8x25-white-jacket-25-rg8x-coaxial-cable-creation-networks-79041.jpg?v=1757903811"},{"product_id":"audio-technica-wrg8x50-white-jacket-50-rg8x-coaxial-cable","title":"RF Venue WRG8X50 – 50 ft Low-Loss RG8X Coaxial Cable, White","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue WRG8X50 is a 50-foot (approximately 15 m) 50Ω RG8X coaxial cable with a white jacket and BNC male connectors on both ends. It is a standard run length for single-room wireless antenna installations in venues where a white or light-colored finish requires low-visibility cable routing.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eFifty feet is one of the most common antenna cable lengths in professional wireless audio installations — long enough to position remote antennas at the edge of a medium-sized room or on a stage wing, while keeping total cable loss well within the operating range of most antenna distribution systems. The white jacket is specified for installations in churches, conference rooms, lecture halls, and similar venues where white walls, ceiling tiles, or trim make standard black cable visible. Double-shielded construction (braid over foil) provides effective RF isolation across the full 50-foot length. All technical specifications — 50Ω impedance, BNC male terminations, double shielding, USA manufacture — are identical to the black jacket RG8X series; the white jacket is the only difference. The cable is manufactured in the USA and QC tested on calibrated Agilent network analyzers to confirm RF performance before shipment. At 50 feet, this cable operates comfortably within the link budget of standard wireless microphone and IEM antenna distribution systems without additional amplification.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded Construction\u003c\/strong\u003e — Braid over foil shielding balances low signal loss with flexibility for routing through conduit and cable trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50Ω Impedance\u003c\/strong\u003e — Matched impedance for wireless microphone and IEM antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Male Connectors\u003c\/strong\u003e — Both ends terminated with BNC male connectors, the standard for professional wireless audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in USA\u003c\/strong\u003e — Manufactured and QC tested in the USA on calibrated Agilent network analyzers for guaranteed RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Jacket\u003c\/strong\u003e — Clean white finish for installations requiring low-visibility cable routing in bright or white-finished rooms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;font-size:0.95em;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background:#f4f4f4;\"\u003e\n\u003cth style=\"text-align:left;padding:8px;border:1px solid #ddd;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px;border:1px solid #ddd;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eWRG8X50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCable Type\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eRG8X Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLength\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e50 ft (~15 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eImpedance\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eConnectors\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eBNC Male (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eShield\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eDouble shielded (braid over foil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eJacket Color\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eQC Testing\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCalibrated Agilent network analyzers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43410393366764,"sku":"WRG8X50","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-wrg8x50-white-jacket-50-rg8x-coaxial-cable-creation-networks-99753.jpg?v=1757903817"},{"product_id":"audio-technica-combine4-iem-transmitter-combines-up-to-four-in-ear-monitor-transmitter-signals-into-a-single-front-panel-mounted-antenna-connector-provides-dc-power-for-up-to-four-iem-transmitters","title":"RF Venue COMBINE4 – 4-Channel In-Ear Monitor Transmitter Combiner","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue COMBINE4 is an active 4-channel in-ear monitor transmitter combiner that consolidates up to four IEM transmitter antenna signals into a single transmit antenna. By combining multiple IEM transmitters through one antenna rather than running individual antennas per channel, the COMBINE4 reduces stage antenna clutter, decreases intermodulation distortion between adjacent IEM transmitters, and allows a single directional or circularly polarized antenna to be positioned for optimal line of sight to performers. The COMBINE4 is compatible with all major UHF IEM transmitter brands.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe COMBINE4 is a 1RU full-width rack-mount unit that installs alongside IEM transmitters in a standard equipment rack. Four BNC input jacks accept the antenna feed from each transmitter; a single BNC output routes to the chosen transmit antenna. DC pass-through jacks power up to four connected IEM transmitters, simplifying rack power wiring by eliminating individual power supplies for transmitters. An IEC power inlet connects directly to AC line voltage — no external power brick required.\u003c\/p\u003e\n\u003cp\u003eThe IEM combining benefit is most significant in multi-channel systems where four or more IEM transmitters are operating simultaneously. Without combining, each transmitter drives its own antenna, creating a dense RF environment on stage with elevated intermodulation products that can affect wireless microphone receiver performance. With the COMBINE4, all four IEM channels route to a single, well-positioned antenna. RF Venue recommends pairing the COMBINE4 with a circularly polarized transmit antenna — the CP Beam (CPB), CP Architectural, or CP Stage — for the best IEM receiver performance. For a complete ready-to-install pack including antenna and cable, see the COMB4CPB, COMB4CP-ARC, or COMB4CP-STAGE bundles.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rf-venue-4-channel-antenna-combiner-combine4-creation-networks-18454.jpg?v=1757903922\" alt=\"RF Venue COMBINE4 – 4-Channel In-Ear Monitor Transmitter Combiner - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rf-venue-4-channel-antenna-combiner-combine4-creation-networks-97614.jpg?v=1757903923\" alt=\"RF Venue COMBINE4 – 4-Channel In-Ear Monitor Transmitter Combiner - Creation Networks\" style=\"max-width:100%;height:auto;margin-top:12px;\"\u003e\n\u003cp\u003eIncluded accessories: four BNC jumper cables, four DC jumper cables, and one AC power cord. The COMBINE4 is the building block for all of RF Venue's IEM upgrade packs and is also available individually for integrators who already have antennas and cabling in place.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Channel IEM Combining\u003c\/strong\u003e — Combines up to four IEM transmitter antenna feeds into a single output, replacing four individual transmit antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Intermodulation\u003c\/strong\u003e — Consolidating multiple transmitters through one antenna reduces intermodulation products that can interfere with wireless microphone receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1RU Rack-Mount\u003c\/strong\u003e — Full-width 1RU rack-mount form factor; installs directly alongside IEM transmitters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power Pass-Through\u003c\/strong\u003e — Powers up to four IEM transmitters via DC jacks, eliminating individual transmitter power supplies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Antenna Freedom\u003c\/strong\u003e — Allows one directional CP antenna to be optimally positioned outside the rack for maximum line-of-sight coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC Line Power\u003c\/strong\u003e — IEC power inlet connects directly to AC; no external power brick required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Brand Compatibility\u003c\/strong\u003e — Works with all UHF IEM transmitters in the 400–800 MHz range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessories\u003c\/strong\u003e — Four BNC jumpers, four DC jumpers, and AC power cord included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship with multiple IEM channels on stage\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center IEM systems\u003c\/li\u003e\n\u003cli\u003eBroadcast studio and live event production with rack-mounted IEM transmitters\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room permanent IEM installations\u003c\/li\u003e\n\u003cli\u003eTouring and rental production companies upgrading multi-channel IEM systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIEM Transmitter Inputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 x BNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x BNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1RU full-width rack-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400–800 MHz (UHF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Power Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 4 IEM transmitters via DC pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAC line (IEC inlet, internal power supply)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded Accessories\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(4) BNC jumpers, (4) DC jumpers, (1) AC power cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF IEM transmitter brands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the COMBINE4 and the COMBINE6HDR?\u003c\/h3\u003e\n\u003cp\u003eThe COMBINE4 supports four IEM transmitter channels; the COMBINE6HDR supports six and adds HDR (High Dynamic Range) technology for cleaner combining in high-density deployments. For systems with five or more IEM channels, the COMBINE6HDR is recommended.\u003c\/p\u003e\n\u003ch3\u003eWhat antenna should I use with the COMBINE4?\u003c\/h3\u003e\n\u003cp\u003eRF Venue recommends a circularly polarized transmit antenna. The CP Beam (CPB), CP Architectural (white or black), and CP Stage antennas are all compatible. For a complete pack with antenna and cable, see the COMB4CPB, COMB4CP-ARC, or COMB4CP-STAGE bundles.\u003c\/p\u003e\n\u003ch3\u003eCan I use the COMBINE4 with IEM transmitters from different manufacturers in the same rack?\u003c\/h3\u003e\n\u003cp\u003eYes. The COMBINE4 accepts standard BNC antenna connections and is brand-agnostic. Mix transmitters from Shure, Sennheiser, Sony, Audio-Technica, or other manufacturers.\u003c\/p\u003e\n\u003ch3\u003eDoes the COMBINE4 require a separate power supply?\u003c\/h3\u003e\n\u003cp\u003eNo. The COMBINE4 includes an internal power supply and connects to AC line voltage via the included IEC power cord.\u003c\/p\u003e\n\u003ch3\u003eHow many IEM channels can be combined through a single antenna?\u003c\/h3\u003e\n\u003cp\u003eRF Venue recommends no more than eight transmitters through a single combiner-antenna system. For eight channels, two COMBINE4 units with two antennas, or a single COMBINE6HDR with appropriate cabling, would be needed. More channels may result in signal loss through the combining network.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the COMBINE4?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43419800109292,"sku":"COMBINE4","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rf-venue-4-channel-antenna-combiner-combine4-creation-networks-18454.jpg?v=1757903922"},{"product_id":"audio-technica-combine8-iem-transmitter-combines-up-to-eight-in-ear-monitor-transmitter-signals-into-a-single-front-panel-mounted-antenna-connector-provides-dc-power-for-up-to-eight-iem-transmitters","title":"RF Venue COMBINE8 – 8-Channel IEM Transmitter Combiner","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue COMBINE8 is an 8-channel active IEM transmitter combiner that consolidates up to eight in-ear monitor transmitter signals into a single, more effective transmit antenna. By eliminating the need for multiple individual antennas per transmitter, the COMBINE8 reduces physical clutter, lowers intermodulation distortion, and improves overall IEM system reliability. Compatible with all brands of unlicensed IEM transmitters operating in the UHF TV band at 50 mW or less, the COMBINE8 is the standard infrastructure component for professional multi-channel IEM deployments.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eIn multi-channel IEM deployments, transmitters from all manufacturers are typically configured to output at the lowest practical power level to minimize intermodulation between channels. However, running eight transmitters at minimal power with individual antennas placed near the rack — often far from performers — compromises signal reliability. The COMBINE8 addresses this by combining all eight transmitter outputs into a single coaxial connection that feeds one high-gain antenna positioned optimally toward the stage.\u003c\/p\u003e\n\u003cp\u003eThe COMBINE8’s active combining circuitry provides a 65% improvement in total harmonic distortion over a comparable 4-channel system, while maintaining output compatibility with all IEM manufacturers’ receiver systems. An LED indicator on the front panel activates when any input signal exceeds the +5 dBm threshold, providing a quick visual check that transmitters are properly connected and powered during setup.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rf-venue-8-channel-iem-transmitter-combiner-470-to-608-mhz-combine8-creation-networks-53274.jpg?v=1757903925\" alt=\"RF Venue COMBINE8 – 8-Channel IEM Transmitter Combiner - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rf-venue-8-channel-iem-transmitter-combiner-470-to-608-mhz-combine8-creation-networks-63362.jpg?v=1757903926\" alt=\"RF Venue COMBINE8 – 8-Channel IEM Transmitter Combiner - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eA significant operational benefit is the DC Octopus cable, included with the COMBINE8. This 8-connector power distribution cable allows the COMBINE8’s 12 VDC, 4 A output to power up to eight compatible IEM transmitters directly, eliminating individual wall warts or power adapters at each transmitter position. This single-cable power distribution approach reduces rack cable density and simplifies IEM rack maintenance.\u003c\/p\u003e\n\u003cp\u003eThe COMBINE8 is compatible with any IEM transmitter — analog or digital — operating in the UHF TV band at 50 mW or less, regardless of manufacturer. It operates from 100–240 VAC for worldwide compatibility and is designed as a permanent rack component in both fixed installed and touring IEM systems.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Channel Active Combining\u003c\/strong\u003e — Combines up to 8 IEM transmitters into a single antenna output with 65% lower THD than a comparable 4-channel system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Overload Indicator\u003c\/strong\u003e — Front panel LED activates at \u0026gt;+5 dBm input for quick connection verification during setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Octopus Cable Included\u003c\/strong\u003e — Powers up to 8 compatible IEM transmitters from the COMBINE8’s 12 VDC output, eliminating individual wall warts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e+18 dBm Max Input\u003c\/strong\u003e — Handles IEM transmitters at up to 60 mW per port without overloading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal IEM Compatibility\u003c\/strong\u003e — Works with all brands and models of unlicensed IEM transmitters in the UHF TV band, analog or digital.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100–240 VAC Power\u003c\/strong\u003e — Worldwide-compatible power supply for international touring and fixed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1RU Rackmount\u003c\/strong\u003e — Standard 19-inch rack mounting in the same unit width as professional wireless audio equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLive performance venues with 2–8 IEM users requiring a professional transmitter combining solution\u003c\/li\u003e\n\u003cli\u003eHouses of worship with full band on in-ear monitors\u003c\/li\u003e\n\u003cli\u003eTouring productions requiring reliable multi-channel IEM transmitter infrastructure\u003c\/li\u003e\n\u003cli\u003eBroadcast studios and television production with talent IEM distribution\u003c\/li\u003e\n\u003cli\u003eAuditoriums and multi-purpose rooms with installed IEM systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range (USA\/CAN)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–608 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range (International)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–698 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eI\/O\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8× BNC RF inputs, 1× BNC antenna output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum RF Input Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+18 dBm (60 mW) per port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLED Indicator Threshold\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;+5 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput AC Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–240 VAC, 50\/60 Hz, 2 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Output Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Output Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e84 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e480 × 45 × 260 mm (19\" × 1.8\" × 10.2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1RU rackmount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the benefit of using the COMBINE8 versus individual antennas for each IEM transmitter?\u003c\/h3\u003e\n\u003cp\u003eIndividual transmit antennas placed near the rack introduce intermodulation between adjacent channels and provide poor coverage to performers far from the rack. The COMBINE8 consolidates all signals into a single output feeding a high-gain antenna — such as the CP Beam or CP Architectural Antenna — positioned optimally toward the stage. This approach reduces intermodulation, improves signal coverage, and eliminates the antenna farm created by multiple individual antennas.\u003c\/p\u003e\n\u003ch3\u003eIs the COMBINE8 compatible with digital IEM transmitters?\u003c\/h3\u003e\n\u003cp\u003eYes. The COMBINE8 works with analog and digital IEM transmitters operating at 50 mW or less in the UHF TV band, including digital systems from Shure (PSM series), Sennheiser, Lectrosonics, and other manufacturers.\u003c\/p\u003e\n\u003ch3\u003eCan the DC Octopus cable power all 8 IEM transmitters simultaneously?\u003c\/h3\u003e\n\u003cp\u003eThe DC Octopus cable provides 8 individual DC connectors from the COMBINE8’s 12 VDC, 4 A output. Whether all 8 transmitters can be powered simultaneously depends on the DC power draw of the connected transmitters. Verify each transmitter’s power requirements before relying on the DC Octopus for all 8 positions.\u003c\/p\u003e\n\u003ch3\u003eWhat antennas can be used with the COMBINE8?\u003c\/h3\u003e\n\u003cp\u003eThe COMBINE8 antenna output (BNC female) is compatible with any 50-ohm IEM transmit antenna. RF Venue offers the CP Beam (directional, 9 dBd gain), CP Stage (weather-resistant, IP-rated), and CP Architectural Antenna (wall\/ceiling mount) as recommended pairings. Bundle configurations including these antennas are available as COMB8CPB, COMB8CP-STAGE, COMB8CP-ARC, and COMB8CP-ARCB.\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum number of IEM channels the COMBINE8 supports?\u003c\/h3\u003e\n\u003cp\u003eThe COMBINE8 supports 8 IEM transmitter channels in a single 1RU unit. For systems requiring more than 8 channels, multiple COMBINE8 units each feeding a separate antenna, or the 6-channel COMBINE6 HDR cascade (which supports 12 channels in 1 RU), provide additional options.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty covers this product?\u003c\/h3\u003e\n\u003cp\u003eThe RF Venue COMBINE8 is covered by a manufacturer warranty. Contact Creation Networks at creationnetworks.net for warranty registration and support.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":43419827863788,"sku":"COMBINE8","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-rf-venue-8-channel-iem-transmitter-combiner-470-to-608-mhz-combine8-creation-networks-53274.jpg?v=1793684169"},{"product_id":"audio-technica-comb4cpb-rf-venue-4-channel-antenna-combiner-with-cp-beam-antenna-and-cable-bundle","title":"RF Venue COMB4CPB – 4-Channel IEM Combiner with CP Beam Antenna Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue COMB4CPB is a complete 4-channel in-ear monitor combining system that bundles the COMBINE4 IEM transmitter combiner, the CP Beam circularly polarized directional UHF antenna, and a 25-foot RG8X coaxial cable. Designed for commercial AV integrators and production teams, this IEM combiner pack consolidates up to four in-ear monitor transmitter signals onto a single antenna, reducing stage cable clutter and minimizing intermodulation distortion. The CP Beam's helical, circularly polarized design ensures consistent signal delivery to performers wearing IEM receivers regardless of body orientation.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe COMB4CPB addresses one of the most common challenges in multi-channel IEM deployments: antenna congestion. When multiple IEM transmitters each drive their own antenna, the resulting RF environment becomes dense with competing signals. The COMBINE4 active combiner solves this by accepting up to four transmitter antenna feeds at its BNC inputs and routing the combined signal through a single, well-positioned antenna — the CP Beam.\u003c\/p\u003e\n\u003cp\u003eThe COMBINE4 is a 1RU rack-mount unit that installs alongside IEM transmitters in a standard equipment rack. It passes DC power to up to four connected transmitters, simplifying power wiring. The CP Beam antenna is a directional helical design operating across the UHF band (400–800 MHz). Its circular polarization means it radiates signal across all polarization planes simultaneously, which is critical for IEM systems because performers move freely and receiver body packs may be oriented at any angle. The included 25-foot RG8X cable provides sufficient reach to position the antenna at the stage edge, front of house, or any location with clear line of sight to the performance area.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-comb4cpb-rf-venue-4-channel-antenna-combiner-with-cp-beam-antenna-and-cable-bundle-creation-networks-66307.jpg?v=1757926806\" alt=\"RF Venue COMB4CPB – 4-Channel IEM Combiner with CP Beam Antenna Pack - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eThis bundle is compatible with all major UHF IEM transmitter brands including Shure, Sennheiser, Sony, and Audio-Technica. All necessary interconnect hardware is included for immediate installation. For larger IEM systems requiring more than four channels, multiple COMBINE4 units can be deployed. This pack is also sold individually without the cable bundle for integrators who already have cabling in place.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Channel IEM Combining\u003c\/strong\u003e — COMBINE4 consolidates up to four IEM transmitter antenna feeds into a single antenna output, reducing RF congestion and intermodulation on stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircularly Polarized CP Beam Antenna\u003c\/strong\u003e — Helical design transmits across all polarization planes, maintaining consistent signal strength for moving performers with body-worn IEM receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Coverage Pattern\u003c\/strong\u003e — Focused beam concentrates RF energy toward the performance area, extending effective range compared to omnidirectional alternatives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1RU Rack-Mount Form Factor\u003c\/strong\u003e — COMBINE4 integrates directly into a standard equipment rack alongside IEM transmitters for a clean, organized installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power Pass-Through\u003c\/strong\u003e — Powers up to four connected IEM transmitters via DC jacks, reducing the need for separate power supplies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Brand Compatibility\u003c\/strong\u003e — Works with all UHF IEM transmitter brands operating in the 400–800 MHz frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25' RG8X Cable Included\u003c\/strong\u003e — Provides sufficient length to route the CP Beam antenna to an optimal stage-edge or FOH position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-Deploy Bundle\u003c\/strong\u003e — All interconnect hardware and cable included; no additional purchases required for a complete installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship with multiple IEM transmitter channels on stage\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center live productions\u003c\/li\u003e\n\u003cli\u003eBroadcast studio stage with rack-mounted IEM systems\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room and all-hands room with permanent AV installations\u003c\/li\u003e\n\u003cli\u003eCommercial AV integration projects requiring clean RF management for in-ear monitor systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCOMBINE4 IEM Combiner, CP Beam Antenna (CPB), 25' RG8X Coaxial Cable (BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE4 Form Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1RU full-width rack-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIEM Transmitter Inputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 x BNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x BNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCP Beam Antenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDirectional helical, circularly polarized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400–800 MHz (UHF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Length Included\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25 ft (RG8X, BNC-terminated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Power Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 4 IEM transmitters via DC pass-through jacks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF IEM transmitter brands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat IEM transmitter brands are compatible with the COMB4CPB?\u003c\/h3\u003e\n\u003cp\u003eThe COMBINE4 works with all major UHF IEM transmitter brands including Shure, Sennheiser, Sony, and Audio-Technica. It accepts standard BNC antenna connections common to professional IEM transmitters.\u003c\/p\u003e\n\u003ch3\u003eHow does the CP Beam improve IEM signal delivery compared to a standard whip antenna?\u003c\/h3\u003e\n\u003cp\u003eThe CP Beam's helical, circularly polarized design radiates signal across all polarization planes simultaneously. Because IEM receiver body packs can be oriented in any direction on a performer, circular polarization reduces dropouts caused by polarization mismatch — a common failure point with linearly polarized transmit antennas.\u003c\/p\u003e\n\u003ch3\u003eCan the COMBINE4 handle more than four IEM transmitters?\u003c\/h3\u003e\n\u003cp\u003eThe COMBINE4 accepts up to four transmitter antenna feeds. For systems with more than four IEM channels, additional COMBINE4 units can be used with additional antennas, or the COMBINE6 HDR (6-channel) should be considered.\u003c\/p\u003e\n\u003ch3\u003eWhere should the CP Beam antenna be positioned for best performance?\u003c\/h3\u003e\n\u003cp\u003eMount the CP Beam at the stage edge or front of house, aimed toward the performance area. The directional pattern focuses RF energy at the performers, maximizing signal-to-noise for the body-worn IEM receivers in use.\u003c\/p\u003e\n\u003ch3\u003eIs the COMBINE4 rack-mountable?\u003c\/h3\u003e\n\u003cp\u003eYes. The COMBINE4 occupies 1RU of standard rack space and mounts directly in any 19-inch equipment rack alongside IEM transmitters.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the COMB4CPB and get support?\u003c\/h3\u003e\n\u003cp\u003eThe RF Venue COMB4CPB is available through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. Contact us for purchasing assistance, system design support, or to discuss integration requirements.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44023453843692,"sku":"COMB4CPB","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-comb4cpb-rf-venue-4-channel-antenna-combiner-with-cp-beam-antenna-and-cable-bundle-creation-networks-66307.jpg?v=1793695181"},{"product_id":"audio-technica-rf-venue-8-channel-in-ear-monitor-upgrade-pack-with-combine8-cp-beam-antenna-and-bnc-cables-470-to-608-mhz","title":"RF Venue COMB8CPB – 8-Channel IEM Pack with CP Beam Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue COMB8CPB is a complete 8-channel in-ear monitor upgrade bundle pairing the COMBINE8 IEM transmitter combiner with the CP Beam circularly polarized antenna and all required cabling. The CP Beam focuses signal directly on performers with a 70-degree beam pattern and 9 dBd gain, while the COMBINE8 consolidates up to eight IEM transmitter signals of any brand (50 mW or less) into a single antenna output. This bundle eliminates the “antenna farm” problem common in multi-IEM deployments and provides DC power to all 8 transmitters, removing the need for individual wall warts.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eIn-ear monitor systems with multiple transmitters require either a cluttered array of individual transmit antennas, or a combiner system that consolidates those signals into a single high-performance antenna. The COMB8CPB does the latter: the COMBINE8 accepts signals from up to eight IEM transmitters via BNC inputs and combines them into a single RF output, which feeds the CP Beam antenna for transmission to performers on stage.\u003c\/p\u003e\n\u003cp\u003eThe CP Beam is a circularly polarized helical antenna specifically engineered for IEM transmitter applications. Its circular polarization maintains consistent signal strength as performers rotate — unlike linearly polarized antennas, which experience signal drops when the transmitter antenna and receive element are cross-polarized. The 70-degree beam pattern focuses RF energy toward the stage, with a typical range of up to 600 feet and 9 dBd of gain, effectively increasing the system’s transmit power by nearly eight times over a comparable system using the lowest transmitter output setting.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-8-channel-in-ear-monitor-upgrade-pack-with-combine8-cp-beam-antenna-and-bnc-cables-470-to-608-mhz-comb8cpb-creation-networks-27742.jpg?v=1757926961\" alt=\"RF Venue COMB8CPB – 8-Channel IEM Pack with CP Beam Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-8-channel-in-ear-monitor-upgrade-pack-with-combine8-cp-beam-antenna-and-bnc-cables-470-to-608-mhz-comb8cpb-creation-networks-21178.jpg?v=1757926961\" alt=\"RF Venue COMB8CPB – 8-Channel IEM Pack with CP Beam Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eThe CP Beam folds flat for transport, fitting in a 3 RU rack drawer, making it a practical choice for both permanent installation and touring applications. The COMBINE8 also includes an LED indicator that activates when any input signal exceeds +5 dBm, aiding setup and troubleshooting. The included DC Octopus 8-connector cable allows the COMBINE8 to distribute 12 VDC power to up to 8 compatible IEM transmitters directly, eliminating wall warts in the rack.\u003c\/p\u003e\n\u003cp\u003eThe COMBINE8 frequency range for the USA and Canada is 470–608 MHz. The CP Beam operates from 470–698 MHz for international compatibility. Both units are compatible with all major IEM transmitter brands including Shure, Sennheiser, Lectrosonics, and others.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Channel IEM Combiner (COMBINE8)\u003c\/strong\u003e — Combines up to 8 IEM transmitter signals into a single antenna output with 65% improvement in harmonic distortion over comparable 4-channel systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCP Beam Antenna\u003c\/strong\u003e — Circularly polarized, 9 dBd gain, 70° beam, up to 600 ft typical range. Folds flat for 3 RU rack storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircular Polarization\u003c\/strong\u003e — Consistent IEM signal regardless of performer orientation; eliminates polarization dropout common with linear antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Octopus Power Distribution\u003c\/strong\u003e — Included 8-connector cable powers up to 8 IEM transmitters from the COMBINE8, removing wall warts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Overload Indicator\u003c\/strong\u003e — Activates when input signal exceeds +5 dBm for straightforward setup verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand-Agnostic\u003c\/strong\u003e — Works with any IEM transmitter operating at 50 mW or less in the UHF TV band, regardless of manufacturer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Bundle\u003c\/strong\u003e — Includes 25' RG8X antenna cable, 8 BNC jumper cables (1.5 ft), DC Octopus cable, and AC power cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x CP Beam Antenna with stand mount and N-to-BNC connector\u003c\/li\u003e\n\u003cli\u003e1x COMBINE8 8-Channel IEM Transmitter Combiner\u003c\/li\u003e\n\u003cli\u003e1x 25' RG8X coaxial cable\u003c\/li\u003e\n\u003cli\u003e8x 1.5' BNC jumper cables\u003c\/li\u003e\n\u003cli\u003e1x DC Octopus 8-Connector Power Distribution Cable\u003c\/li\u003e\n\u003cli\u003e1x AC power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLive performance venues with multiple IEM users on stage\u003c\/li\u003e\n\u003cli\u003eHouses of worship with full band using in-ear monitors\u003c\/li\u003e\n\u003cli\u003eTouring productions requiring portable IEM antenna deployment\u003c\/li\u003e\n\u003cli\u003eBroadcast studios and television production with IEM distribution to talent\u003c\/li\u003e\n\u003cli\u003eAuditoriums and multi-purpose rooms with up to 8 IEM channels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Frequency Range (USA\/CAN)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–608 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 (BNC inputs), 1 antenna output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Max RF Input Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+18 dBm (60 mW) per port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 LED Threshold\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;+5 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–240 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 DC Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 VDC, 4 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Power Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e84 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e480 × 45 × 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCP Beam Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–698 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCP Beam Gain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 dBd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCP Beam Beam Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~70° beam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCP Beam Typical Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 600 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCP Beam Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,100 g (2.5 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCP Beam Mount Threads\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/4-20, 3\/8-16, 5\/8-27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCP Beam Operating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-23°C to 54°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the COMB8CPB work with any brand of IEM transmitter?\u003c\/h3\u003e\n\u003cp\u003eYes. The COMBINE8 accepts signals from any IEM transmitter operating at 50 mW or less in the UHF TV band (470–608 MHz USA\/CAN) with a BNC antenna output, regardless of manufacturer.\u003c\/p\u003e\n\u003ch3\u003eWhy is circular polarization important for IEM systems?\u003c\/h3\u003e\n\u003cp\u003eIEM receiver packs worn by performers rotate as the performer moves, causing polarization mismatch with linearly polarized transmit antennas. Circular polarization maintains consistent signal transfer regardless of receiver pack orientation, reducing audio dropouts during performance.\u003c\/p\u003e\n\u003ch3\u003eCan the CP Beam be used for permanent installation?\u003c\/h3\u003e\n\u003cp\u003eYes. The CP Beam includes standard microphone stand mounting threads (1\/4-20, 3\/8-16, 5\/8-27) and can be permanently mounted on a stand or custom bracket. It folds flat for storage and transport in a 3 RU rack drawer.\u003c\/p\u003e\n\u003ch3\u003eWhat does the DC Octopus cable do?\u003c\/h3\u003e\n\u003cp\u003eThe DC Octopus cable connects to the COMBINE8’s 12 VDC output and provides individual DC power connectors for up to 8 compatible IEM transmitters. This eliminates individual wall warts, reduces rack cable clutter, and allows the COMBINE8 to serve as a single power source for the entire IEM transmitter rack.\u003c\/p\u003e\n\u003ch3\u003eIs the COMB8CPB suitable for outdoor or touring use?\u003c\/h3\u003e\n\u003cp\u003eYes. The CP Beam is rated for operating temperatures from -23°C to 54°C and folds flat for transport. For outdoor permanent installation, the CP Stage antenna variant (COMB8CP-STAGE) provides an IP-rated weather-resistant enclosure.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty applies to this bundle?\u003c\/h3\u003e\n\u003cp\u003eAll RF Venue components in this bundle are covered by a manufacturer warranty. Contact Creation Networks at creationnetworks.net for warranty and support.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44033644724460,"sku":"COMB8CPB","price":2889.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-8-channel-in-ear-monitor-upgrade-pack-with-combine8-cp-beam-antenna-and-bnc-cables-470-to-608-mhz-comb8cpb-creation-networks-27742.jpg?v=1793695307"},{"product_id":"audio-technica-bpf470t608-rf-venue-rf-band-pass-filter-470-to-608-mhz","title":"RF Venue BPF470T608 – Band-Pass Filter, 470–608 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue BPF470T608 is a passive wide-band UHF band-pass filter covering 470–608 MHz — a 138 MHz pass band that encompasses most licensed UHF wireless microphone frequencies currently in use in North America. It attenuates out-of-band RF interference by 40 dB above and below the pass band, protecting wireless receivers from cellular, LTE, 5G, and other high-power RF sources operating outside the UHF wireless mic spectrum.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eWhen a facility operates wireless microphone systems from multiple manufacturers — or when a rental inventory spans several frequency bands — selecting a single narrow-band filter becomes impractical. The BPF470T608 solves this with a 138 MHz pass band that covers the full range of licensed UHF wireless microphone allocations currently coordinated in the United States, from the bottom of the UHF television band through the top of the currently licensed wireless mic spectrum at 608 MHz.\u003c\/p\u003e\n\u003cp\u003eIn environments where cellular LTE and 5G deployments create strong interference below 470 MHz or above 608 MHz, the BPF470T608 provides 40 dB of attenuation in both stop bands, substantially reducing receiver front-end overload without requiring the system operator to identify and match specific frequency bands. This makes it particularly well suited for rental and staging companies, multi-brand enterprise wireless systems, and permanent installations where frequency coordination may change over time.\u003c\/p\u003e\n\u003cp\u003eLike all RF Venue BPF series filters, the BPF470T608 is entirely passive, connects inline via BNC connectors, and requires no power. Maximum insertion loss is 3.5 dB, which is typically offset by the gain of an antenna distribution system. The filter is not compatible with active antennas or IEM transmit paths.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e470–608 MHz Pass Band\u003c\/strong\u003e — 138 MHz bandwidth covers most licensed UHF wireless mic frequencies currently coordinated in North America across multiple brands and band plans.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 dB Side Rejection\u003c\/strong\u003e — Attenuates signals below 412 MHz and above 668 MHz by 40 dB, blocking cellular, LTE, 5G, and public safety RF outside the wireless mic spectrum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum 3.5 dB Insertion Loss\u003c\/strong\u003e — Minimal in-band signal degradation; suitable for use ahead of active antenna distributors that provide compensating gain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Operation\u003c\/strong\u003e — No power required; installs inline on standard BNC antenna feeds with no configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5 dB Maximum In-Band Ripple\u003c\/strong\u003e — Flat pass-band response across the full 138 MHz bandwidth for consistent performance across all coordinated channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVSWR ≤ 1.5\u003c\/strong\u003e — Low impedance mismatch across the pass band for clean signal transfer in 50-ohm antenna systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2W Maximum Power Handling\u003c\/strong\u003e — Appropriate for receive antenna applications in standard wireless microphone systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Connectors\u003c\/strong\u003e — Compatible with standard wireless microphone antenna distribution infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor\u003c\/strong\u003e — Installs at the antenna output or at the input of an antenna distribution system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRental and staging companies operating mixed-brand wireless microphone inventories across the full licensed UHF spectrum, where a single filter must accommodate multiple frequency bands.\u003c\/li\u003e\n\u003cli\u003eHouses of worship and corporate AV installations with wireless microphone systems from multiple manufacturers operating in different UHF bands, where per-band filtering is impractical.\u003c\/li\u003e\n\u003cli\u003eEnterprise and higher education facilities with legacy wireless microphone systems spanning the full 470–608 MHz range that require front-end protection from adjacent cellular infrastructure.\u003c\/li\u003e\n\u003cli\u003eBroadcast and production facilities coordinating large wireless microphone channel counts across multiple UHF frequency blocks where a broadband filter simplifies system design.\u003c\/li\u003e\n\u003cli\u003ePermanent installations where future frequency recoordination may shift wireless mic assignments within the UHF band, and the filter should remain compatible without replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePass Band\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–608 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePass Band Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e138 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInsertion Loss (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn-Band Ripple (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVSWR (Max)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSide Rejection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 dB @ DC–412 MHz; 20 dB @ 412–426 \u0026amp; 655–668 MHz; 40 dB @ 668–1000 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30 to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone (passive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNot Compatible With\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eActive antennas; IEM transmit antenna feeds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhy would I choose the BPF470T608 over a narrower band-pass filter?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe BPF470T608 is the right choice when your wireless microphone system spans multiple frequency bands or brands, or when you cannot confirm a single narrow band assignment for the entire system. Its 138 MHz pass band accommodates the full range of currently licensed UHF wireless mic frequencies in North America in a single filter, eliminating the need to match each antenna feed to a specific product variant.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill the filter pass all channels in my multi-band wireless system?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, provided all channels fall within 470–608 MHz. Verify that every wireless microphone and IEM receive frequency in the system is within this range before installing. Channels outside the pass band will be attenuated and may become unusable.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the wide pass band reduce the effectiveness of interference rejection compared to a narrower filter?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAt the stop-band boundaries, yes — the 20 dB transition zone spans 412–426 MHz and 655–668 MHz. However, the 40 dB rejection regions below 412 MHz and above 668 MHz still provide substantial attenuation of cellular and other strong out-of-band signals. For systems requiring tighter rejection of signals in the 412–468 MHz or 609–668 MHz range, a narrower filter may be more appropriate.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use this filter with an active antenna distributor?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Install the BPF470T608 at the antenna output or at the input of the active antenna distributor. The distributor's amplifier gain will typically offset the filter's 3.5 dB maximum insertion loss. Do not place the filter between an active (DC-powered) antenna and the distributor if the antenna draws power from the coaxial feed.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs the BPF470T608 suitable for use in Canada or other markets outside the US?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe 470–608 MHz range reflects the current licensed wireless microphone allocation in the United States. Other markets may have different UHF wireless mic allocations. Verify the licensed frequency range for wireless microphone use in your specific jurisdiction before selecting this or any BPF series filter.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44433574920428,"sku":"BPF470T608","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-bpf470t608-rf-venue-rf-band-pass-filter-470-to-608-mhz-creation-networks-41476.jpg?v=1757936208"},{"product_id":"audio-technica-rf-venue-cp-architectural-antenna-with-combine4-4-channel-combiner-cable-bundle-400-to-800-mhz-comb4cp-arc","title":"RF Venue COMB4CP-ARC – 4-Channel IEM Combiner with CP Architectural Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue COMB4CP-ARC is a complete 4-channel in-ear monitor combining pack featuring the COMBINE4 IEM transmitter combiner, the white CP Architectural antenna, and a 25-foot white RG8X coaxial cable. Designed for permanent commercial AV installations, this IEM combiner pack consolidates up to four in-ear monitor transmitter signals onto a single, architecturally integrated antenna. The CP Architectural antenna mounts flush against a wall or ceiling and accepts standard paint, making it nearly invisible in finished interior spaces while delivering circularly polarized IEM signal to performers.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe COMB4CP-ARC addresses the challenge of combining a professional 4-channel IEM system with a clean, permanent installation aesthetic. The CP Architectural antenna is a circularly polarized, wall- or ceiling-mountable antenna designed to blend into architectural environments — its slim profile and paintable white enclosure make it suitable for houses of worship, corporate boardrooms, performing arts centers, and any venue where exposed rack antennas are unacceptable.\u003c\/p\u003e\n\u003cp\u003eThe COMBINE4 is a 1RU rack-mount active combiner that accepts up to four IEM transmitter antenna feeds at its BNC inputs and routes the combined signal through the CP Architectural antenna. DC pass-through ports power up to four connected transmitters, reducing the need for separate power supplies. The included 25-foot white RG8X coaxial cable provides sufficient reach to route from a rack room or equipment closet to the antenna's mounted position on a wall or ceiling. The CP Architectural antenna's circular polarization ensures consistent IEM signal delivery to performers regardless of body pack receiver orientation.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-cp-architectural-antenna-with-combine4-4-channel-combiner-and-cable-bundle-400-to-800-mhz-comb4cp-arc-creation-networks-26980.jpg?v=1757936209\" alt=\"RF Venue COMB4CP-ARC – 4-Channel IEM Combiner with CP Architectural Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eCompatible with all major UHF IEM transmitter brands including Shure, Sennheiser, Sony, and Audio-Technica, this pack provides a complete, permanent IEM distribution solution. For the black-finish version of this pack, see the COMB4CP-ARCB.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCP Architectural Antenna (White)\u003c\/strong\u003e — Circularly polarized, wall\/ceiling-mount antenna with slim, paintable white enclosure; designed to integrate into finished architectural spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Channel IEM Combining\u003c\/strong\u003e — COMBINE4 consolidates up to four IEM transmitter antenna feeds into a single antenna output, reducing RF congestion and intermodulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircular Polarization\u003c\/strong\u003e — Transmits across all polarization planes, maintaining consistent signal for performers with body-worn IEM receivers in any orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1RU Rack-Mount COMBINE4\u003c\/strong\u003e — Full-width rack-mount combiner installs alongside IEM transmitters in a standard equipment rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power Pass-Through\u003c\/strong\u003e — Powers up to four IEM transmitters via DC jacks, simplifying rack power wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25' White RG8X Cable Included\u003c\/strong\u003e — Matches white antenna finish; provides adequate reach from rack to wall\/ceiling antenna position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable Enclosure\u003c\/strong\u003e — CP Architectural antenna housing accepts non-metallic paint for custom color matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Brand Compatibility\u003c\/strong\u003e — Works with all UHF IEM transmitters in the 400–800 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship with permanently installed IEM systems requiring discreet antenna placement\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center IEM installations\u003c\/li\u003e\n\u003cli\u003eCorporate boardroom and conference room AV systems\u003c\/li\u003e\n\u003cli\u003eBroadcast studio and multi-purpose room permanent installations\u003c\/li\u003e\n\u003cli\u003eCommercial AV projects where architectural aesthetics are a design requirement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(1) CP Architectural Antenna (white), (1) COMBINE4 IEM Combiner, (1) 25' White RG8X Coaxial Cable (BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCircularly polarized, wall\/ceiling-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite (paintable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400–800 MHz (UHF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE4 Form Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1RU full-width rack-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIEM Transmitter Inputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 x BNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x BNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Power Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 4 IEM transmitters via DC pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25 ft (RG8X, white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF IEM transmitter brands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between COMB4CP-ARC and COMB4CP-ARCB?\u003c\/h3\u003e\n\u003cp\u003eThe COMB4CP-ARC includes the white CP Architectural antenna with a 25' white cable; the COMB4CP-ARCB includes the black-finish version with a 25' black cable. Both are functionally identical — the finish selection depends on the installation environment's color scheme.\u003c\/p\u003e\n\u003ch3\u003eCan the CP Architectural antenna be painted to match the wall?\u003c\/h3\u003e\n\u003cp\u003eYes. The antenna's enclosure accepts non-metallic paint. Avoid paint containing metallic particles, which can degrade RF performance.\u003c\/p\u003e\n\u003ch3\u003eHow many IEM transmitters can the COMBINE4 handle?\u003c\/h3\u003e\n\u003cp\u003eThe COMBINE4 accepts up to four IEM transmitter antenna feeds. For systems with more than four channels, multiple COMBINE4 units or the COMBINE6 HDR should be considered.\u003c\/p\u003e\n\u003ch3\u003eIs this antenna suitable for wireless microphone reception as well?\u003c\/h3\u003e\n\u003cp\u003eThe CP Architectural antenna and COMBINE4 are designed for IEM transmit applications. For wireless microphone receive applications, the Diversity Architectural Antenna (D-ARC) is the appropriate product.\u003c\/p\u003e\n\u003ch3\u003eWhat IEM transmitter brands are compatible?\u003c\/h3\u003e\n\u003cp\u003eThe COMBINE4 works with all major UHF IEM transmitter brands including Shure, Sennheiser, Sony, Audio-Technica, and others, as long as they operate in the 400–800 MHz range.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the COMB4CP-ARC?\u003c\/h3\u003e\n\u003cp\u003eThe RF Venue COMB4CP-ARC is available through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44433629413612,"sku":"COMB4CP-ARC","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-cp-architectural-antenna-with-combine4-4-channel-combiner-and-cable-bundle-400-to-800-mhz-comb4cp-arc-creation-networks-26980.jpg?v=1757936209"},{"product_id":"audio-technica-rf-venue-cp-architectural-antenna-combine4-package-black-comb4cp-arcb","title":"RF Venue COMB4CP-ARCB – 4-Channel IEM Combiner with Black CP Architectural Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue COMB4CP-ARCB is a complete 4-channel in-ear monitor combining pack featuring the COMBINE4 IEM transmitter combiner, the black CP Architectural antenna, and a 25-foot black RG8X coaxial cable. Designed for permanent commercial AV installations in dark-finish environments, this IEM combiner pack consolidates up to four in-ear monitor transmitter signals onto a single architecturally integrated antenna. The black CP Architectural antenna mounts flush against a wall or ceiling and accepts standard paint, making it suitable for venues with dark walls, exposed ceilings, or black-finish AV hardware specifications.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe COMB4CP-ARCB is the black-finish counterpart to the COMB4CP-ARC. It pairs the black CP Architectural antenna with the COMBINE4 active IEM combiner and a 25-foot black RG8X coaxial cable. The CP Architectural antenna is a circularly polarized, wall- or ceiling-mountable antenna with a slim, paintable black enclosure designed to blend into dark architectural environments — exposed brick, dark ceilings, black-finish AV installations, and theatrical spaces.\u003c\/p\u003e\n\u003cp\u003eThe COMBINE4 is a 1RU rack-mount active combiner accepting up to four IEM transmitter antenna feeds at its BNC inputs, routing the combined signal through the single CP Architectural antenna. DC pass-through ports power up to four connected IEM transmitters, reducing power supply complexity in the rack. The CP Architectural antenna's circular polarization ensures consistent IEM signal delivery regardless of the body pack receiver's orientation on a moving performer. The 25-foot black cable provides sufficient reach from the equipment rack to the wall or ceiling-mounted antenna position while maintaining visual consistency with the black finish.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-cp-architectural-antenna-combine4-package-black-comb4cp-arcb-creation-networks-77072.jpg?v=1757936209\" alt=\"RF Venue COMB4CP-ARCB – 4-Channel IEM Combiner with Black CP Architectural Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eCompatible with all major UHF IEM transmitter brands, the COMB4CP-ARCB is an ideal solution for houses of worship, performing arts centers, corporate boardrooms, and broadcast studios where a black antenna finish is specified. For the white-finish version, see the COMB4CP-ARC.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack CP Architectural Antenna\u003c\/strong\u003e — Circularly polarized, wall\/ceiling-mount antenna with slim, paintable black enclosure for dark-finish installations and theatrical environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Channel IEM Combining\u003c\/strong\u003e — COMBINE4 consolidates up to four IEM transmitter antenna feeds into a single antenna output, reducing RF congestion on stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircular Polarization\u003c\/strong\u003e — Transmits across all polarization planes, maintaining consistent IEM signal for performers in any body orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1RU Rack-Mount COMBINE4\u003c\/strong\u003e — Installs in a standard equipment rack alongside IEM transmitters for an organized, professional installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power Pass-Through\u003c\/strong\u003e — Powers up to four IEM transmitters via DC jacks, simplifying rack power wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25' Black RG8X Cable Included\u003c\/strong\u003e — Black cable matches antenna finish; routes cleanly in dark-finish installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable Enclosure\u003c\/strong\u003e — Antenna housing accepts non-metallic paint for custom color matching to any interior finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Brand Compatibility\u003c\/strong\u003e — Compatible with all UHF IEM transmitters in the 400–800 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship with dark-finish interiors and permanently installed IEM systems\u003c\/li\u003e\n\u003cli\u003eAuditorium, theater, and performing arts center IEM installations\u003c\/li\u003e\n\u003cli\u003eCorporate boardroom with black-finish AV hardware specifications\u003c\/li\u003e\n\u003cli\u003eBroadcast studio permanent IEM antenna installations\u003c\/li\u003e\n\u003cli\u003eCommercial AV projects specifying black hardware finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(1) CP Architectural Antenna (black), (1) COMBINE4 IEM Combiner, (1) 25' Black RG8X Coaxial Cable (BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCircularly polarized, wall\/ceiling-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack (paintable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400–800 MHz (UHF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE4 Form Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1RU full-width rack-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIEM Transmitter Inputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 x BNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x BNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Power Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 4 IEM transmitters via DC pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25 ft (RG8X, black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF IEM transmitter brands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between COMB4CP-ARCB and COMB4CP-ARC?\u003c\/h3\u003e\n\u003cp\u003eThe COMB4CP-ARCB includes the black-finish CP Architectural antenna with a 25' black cable; the COMB4CP-ARC includes the white-finish version with a 25' white cable. Both packs are functionally identical — the selection depends on the installation environment's color scheme.\u003c\/p\u003e\n\u003ch3\u003eCan the black CP Architectural antenna be painted to match surrounding surfaces?\u003c\/h3\u003e\n\u003cp\u003eYes. The antenna enclosure accepts non-metallic paint. Metallic paint should be avoided as it can degrade RF performance.\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum number of IEM transmitters the COMBINE4 supports?\u003c\/h3\u003e\n\u003cp\u003eThe COMBINE4 supports up to four IEM transmitter antenna feeds. For systems with more than four IEM channels, additional COMBINE4 units or the COMBINE6 HDR should be used.\u003c\/p\u003e\n\u003ch3\u003eIs the CP Architectural antenna suitable for wireless microphone reception?\u003c\/h3\u003e\n\u003cp\u003eNo. The CP Architectural antenna and COMBINE4 are designed for IEM transmit applications. For wireless microphone receive applications, RF Venue's Diversity Architectural Antenna (D-ARC\/D-ARCB) is the correct product.\u003c\/p\u003e\n\u003ch3\u003eDoes the COMBINE4 require an external power supply?\u003c\/h3\u003e\n\u003cp\u003eThe COMBINE4 connects directly to AC line voltage and includes an internal power supply. It does not require a separate wall wart or power brick.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the COMB4CP-ARCB?\u003c\/h3\u003e\n\u003cp\u003eThe RF Venue COMB4CP-ARCB is available through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44433640685804,"sku":"COMB4CP-ARCB","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-cp-architectural-antenna-combine4-package-black-comb4cp-arcb-creation-networks-77072.jpg?v=1757936209"},{"product_id":"audio-technica-rf-venue-cp-architectural-antenna-with-combine8-8-channel-combiner-cable-bundle-white-470-to-608-mhz-comb8cp-arc","title":"RF Venue COMB8CP-ARC – 8-Channel IEM Pack with White CP Architectural Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue COMB8CP-ARC is a complete 8-channel in-ear monitor system bundle pairing the COMBINE8 IEM transmitter combiner with the white CP Architectural Antenna for fixed venue installations. The CP Architectural Antenna delivers the circular polarization performance of the CP Beam in a slim-profile enclosure designed for permanent wall or ceiling mounting. This bundle is the standard IEM transmitter solution for installed AV environments — houses of worship, conference centers, theaters — where an exposed stand-mounted antenna is architecturally unacceptable.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe CP Architectural Antenna extends RF Venue’s circularly polarized antenna technology into an architectural form factor. Its slim-profile white enclosure mounts flush to walls or ceilings with a pre-drilled rear mounting plate, integrating into the room as discreetly as a smoke detector. The rear-mounted BNC female connector accommodates in-wall or in-ceiling cable runs for a completely concealed installation. Like the CP Beam, it uses circular polarization to maintain consistent signal strength as IEM receiver packs rotate on performers, eliminating the polarization dropout that affects linearly polarized antennas.\u003c\/p\u003e\n\u003cp\u003eThe COMBINE8 receives signals from up to eight IEM transmitters of any brand (50 mW or less) via BNC inputs and combines them into a single output feeding the CP Architectural Antenna. An LED indicator activates when any input exceeds +5 dBm, aiding system setup. The COMBINE8’s DC Octopus cable delivers 12 VDC to up to 8 compatible IEM transmitters, eliminating individual wall warts from the rack.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-cp-architectural-antenna-with-combine8-8-channel-combiner-and-cable-bundle-white-470-to-608-mhz-comb8cp-arc-creation-networks-78282.jpg?v=1757936211\" alt=\"RF Venue COMB8CP-ARC – 8-Channel IEM Pack with White CP Architectural Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eThe white CP Architectural Antenna enclosure can be painted with standard latex paint to match any interior color scheme. The included 25-foot white RG8X coaxial cable is color-matched to maintain the clean aesthetic of a white-interior installation. The COMBINE8 operates in the 470–608 MHz band (USA\/CAN) with a maximum input power of +18 dBm (60 mW) per channel. The CP Architectural Antenna accepts the combined signal from the COMBINE8 output for transmission to performers.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCP Architectural Antenna (White)\u003c\/strong\u003e — Slim-profile circular-polarized antenna for permanent wall or ceiling mounting; nearly invisible in light-colored interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable Enclosure\u003c\/strong\u003e — White housing accepts standard latex paint for color-matching to any interior finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear-Mounted BNC Connector\u003c\/strong\u003e — Supports in-wall\/in-ceiling cable runs for completely concealed wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOMBINE8 8-Channel IEM Combiner\u003c\/strong\u003e — Combines up to 8 IEM transmitter signals; LED overload indicator; max +18 dBm (60 mW) per input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Octopus Power Distribution\u003c\/strong\u003e — Powers up to 8 IEM transmitters from the COMBINE8, eliminating wall warts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircular Polarization\u003c\/strong\u003e — Consistent IEM signal regardless of performer orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand-Agnostic\u003c\/strong\u003e — Compatible with any IEM transmitter at 50 mW or less in the UHF TV band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Cable Included\u003c\/strong\u003e — 25' white RG8X coaxial cable color-matched to the antenna for clean installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x CP Architectural Antenna (White) with rear-mount wall\/ceiling plate and BNC rear connector\u003c\/li\u003e\n\u003cli\u003e1x COMBINE8 8-Channel IEM Transmitter Combiner\u003c\/li\u003e\n\u003cli\u003e1x 25' RG8X coaxial cable (white)\u003c\/li\u003e\n\u003cli\u003e8x BNC jumper cables\u003c\/li\u003e\n\u003cli\u003e1x DC Octopus 8-Connector Power Distribution Cable\u003c\/li\u003e\n\u003cli\u003e1x AC power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouses of worship with installed IEM systems and white-interior sanctuaries\u003c\/li\u003e\n\u003cli\u003eConference centers and multi-purpose venues with permanent IEM infrastructure\u003c\/li\u003e\n\u003cli\u003eAuditoriums and performing arts centers with concealed antenna requirements\u003c\/li\u003e\n\u003cli\u003eBroadcast studios with ceiling-mounted antenna distribution\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces where visible antennas are architecturally unacceptable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Frequency Range (USA\/CAN)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–608 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 BNC inputs, 1 antenna output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Max RF Input Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+18 dBm (60 mW) per port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 LED Threshold\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;+5 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–240 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 DC Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 VDC, 4 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e480 × 45 × 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCP Architectural Antenna Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–608 MHz (USA\/CAN)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Polarization\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCircular\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Mounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWall or ceiling (rear-mount plate included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Enclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite, paintable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna RF Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC female (rear-mounted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow does the CP Architectural Antenna compare to the CP Beam?\u003c\/h3\u003e\n\u003cp\u003eBoth use circularly polarized technology for consistent IEM signal coverage. The CP Beam is a stand-mounted directional antenna with 9 dBd gain and a 70-degree forward beam for longer range applications. The CP Architectural Antenna is a flood-coverage antenna in a slim, paintable enclosure for permanent wall or ceiling installation where aesthetics are the priority. For fixed installed systems, the CP Architectural Antenna is the standard choice.\u003c\/p\u003e\n\u003ch3\u003eCan the antenna be painted after installation?\u003c\/h3\u003e\n\u003cp\u003eYes. The enclosure is designed to accept standard latex paint. The antenna will continue to function normally after painting, allowing exact color-matching to the installation surface.\u003c\/p\u003e\n\u003ch3\u003eDoes this bundle work with any IEM brand?\u003c\/h3\u003e\n\u003cp\u003eYes. The COMBINE8 accepts any IEM transmitter operating at 50 mW or less in the 470–608 MHz UHF band (USA\/CAN). This includes Shure PSM systems, Sennheiser EW-IEM, Lectrosonics, and others.\u003c\/p\u003e\n\u003ch3\u003eCan in-wall cable routing be used with this antenna?\u003c\/h3\u003e\n\u003cp\u003eYes. The CP Architectural Antenna features a rear-mounted BNC female connector, allowing the coaxial cable to be routed through the wall behind the mounting plate for a fully concealed installation.\u003c\/p\u003e\n\u003ch3\u003eIs the COMB8CP-ARCB the same bundle with a black antenna?\u003c\/h3\u003e\n\u003cp\u003eYes. The COMB8CP-ARCB is identical to the COMB8CP-ARC except the CP Architectural Antenna is black-finish. All other components and specifications are the same.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty covers this product?\u003c\/h3\u003e\n\u003cp\u003eRF Venue components are covered by a manufacturer warranty. Contact Creation Networks at creationnetworks.net for support.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44433673126124,"sku":"COMB8CP-ARC","price":2679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-cp-architectural-antenna-with-combine8-8-channel-combiner-and-cable-bundle-white-470-to-608-mhz-comb8cp-arc-creation-networks-78282.jpg?v=1757936211"},{"product_id":"audio-technica-rf-venue-cp-architectural-antenna-with-combine8-8-channel-combiner-cable-bundle-black-470-to-608-mhz-comb8cp-arcb","title":"RF Venue COMB8CP-ARCB – 8-Channel IEM Pack with Black CP Architectural Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue COMB8CP-ARCB is a complete 8-channel in-ear monitor system bundle pairing the COMBINE8 IEM transmitter combiner with the black CP Architectural Antenna. This is the black-finish variant of the COMB8CP-ARC, designed for permanent installations in dark-interior environments — broadcast studios, theater spaces, and venues where a white antenna enclosure would be visually inconsistent. All RF performance specifications are identical to the white variant; only the antenna housing color and included coaxial cable color differ.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe COMB8CP-ARCB delivers the same installed IEM transmitter system as the COMB8CP-ARC with the CP Architectural Antenna in a black enclosure. The black CP Architectural Antenna mounts on walls or ceilings with a pre-drilled rear mounting plate, with the rear-mounted BNC female connector accommodating in-wall or in-ceiling coaxial cable runs for a completely concealed installation. The black enclosure can be painted with standard latex paint for additional color customization.\u003c\/p\u003e\n\u003cp\u003eThe CP Architectural Antenna uses circular polarization to maintain consistent IEM signal coverage as performers’ receiver packs rotate, eliminating the polarization dropout that affects linearly polarized transmit antennas. The antenna is designed for flood-coverage IEM transmission rather than directional projection, making it ideal for stages, altars, and performance areas where performers move freely within a defined area.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-cp-architectural-antenna-with-combine8-8-channel-combiner-and-cable-bundle-black-470-to-608-mhz-comb8cp-arcb-creation-networks-16551.jpg?v=1757936211\" alt=\"RF Venue COMB8CP-ARCB – 8-Channel IEM Pack with Black CP Architectural Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eThe COMBINE8 accepts signals from up to eight IEM transmitters of any brand (50 mW or less) via BNC inputs and combines them into a single antenna output. An LED indicator activates when any input exceeds +5 dBm. The included DC Octopus cable provides 12 VDC power to up to 8 compatible IEM transmitters from the COMBINE8, eliminating individual power adapters in the rack. The included coaxial cable is black to match the antenna, maintaining a consistent visual appearance throughout the installation.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCP Architectural Antenna (Black)\u003c\/strong\u003e — Slim-profile circular-polarized antenna for permanent wall or ceiling mounting in dark-interior environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable Black Enclosure\u003c\/strong\u003e — Accepts standard latex paint for exact color-matching to any interior surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear-Mounted BNC Connector\u003c\/strong\u003e — Supports in-wall\/in-ceiling cable routing for completely concealed wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOMBINE8 8-Channel IEM Combiner\u003c\/strong\u003e — Combines up to 8 IEM transmitter signals into one antenna output; max +18 dBm (60 mW) per input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Octopus Power Distribution\u003c\/strong\u003e — Powers up to 8 IEM transmitters from the COMBINE8 via included 8-connector cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircular Polarization\u003c\/strong\u003e — Consistent IEM coverage regardless of performer orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Cable Included\u003c\/strong\u003e — 25' black RG8X coaxial cable color-matched to the black antenna.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand-Agnostic\u003c\/strong\u003e — Compatible with any IEM transmitter at 50 mW or less in the UHF TV band.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x CP Architectural Antenna (Black) with rear-mount wall\/ceiling plate and BNC rear connector\u003c\/li\u003e\n\u003cli\u003e1x COMBINE8 8-Channel IEM Transmitter Combiner\u003c\/li\u003e\n\u003cli\u003e1x 25' RG8X coaxial cable (black)\u003c\/li\u003e\n\u003cli\u003e8x BNC jumper cables\u003c\/li\u003e\n\u003cli\u003e1x DC Octopus 8-Connector Power Distribution Cable\u003c\/li\u003e\n\u003cli\u003e1x AC power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBroadcast studios and television production environments with black-finish hardware requirements\u003c\/li\u003e\n\u003cli\u003eTheaters and black-box performance spaces with dark-interior aesthetics\u003c\/li\u003e\n\u003cli\u003eHouses of worship with dark ceiling or wall surfaces\u003c\/li\u003e\n\u003cli\u003eAuditoriums with stage-black color schemes in the performance area\u003c\/li\u003e\n\u003cli\u003eCommercial venues requiring concealed IEM antenna infrastructure in dark environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Frequency Range (USA\/CAN)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–608 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 BNC inputs, 1 antenna output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Max RF Input Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+18 dBm (60 mW) per port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 LED Threshold\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;+5 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–240 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 DC Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 VDC, 4 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e480 × 45 × 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCOMBINE8 Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCP Architectural Antenna Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–608 MHz (USA\/CAN)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Polarization\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCircular\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Mounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWall or ceiling (rear-mount plate included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Enclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack, paintable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna RF Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC female (rear-mounted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between COMB8CP-ARCB and COMB8CP-ARC?\u003c\/h3\u003e\n\u003cp\u003eThe COMB8CP-ARCB includes the black CP Architectural Antenna and a black coaxial cable. The COMB8CP-ARC includes the white CP Architectural Antenna and white coaxial cable. All electronic components, RF specifications, and bundle contents are otherwise identical.\u003c\/p\u003e\n\u003ch3\u003eCan this bundle be used with any IEM brand?\u003c\/h3\u003e\n\u003cp\u003eYes. The COMBINE8 is compatible with any IEM transmitter operating at 50 mW or less in the 470–608 MHz band (USA\/CAN), regardless of manufacturer.\u003c\/p\u003e\n\u003ch3\u003eIs in-wall cable routing possible with the black CP Architectural Antenna?\u003c\/h3\u003e\n\u003cp\u003eYes. The rear-mounted BNC female connector allows the coaxial cable to run through the wall or ceiling behind the mounting plate, enabling a completely concealed installation.\u003c\/p\u003e\n\u003ch3\u003eDoes the black enclosure affect RF performance?\u003c\/h3\u003e\n\u003cp\u003eNo. The antenna enclosure color is purely cosmetic and does not affect RF performance. The circularly polarized antenna element inside the black enclosure is identical to the white version.\u003c\/p\u003e\n\u003ch3\u003eCan the black enclosure be painted a different color?\u003c\/h3\u003e\n\u003cp\u003eYes. The enclosure accepts standard latex paint. It can be painted to match any interior wall or ceiling color as needed.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty covers this product?\u003c\/h3\u003e\n\u003cp\u003eRF Venue components are covered by a manufacturer warranty. Contact Creation Networks at creationnetworks.net for warranty and support.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44433713037548,"sku":"COMB8CP-ARCB","price":2679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-cp-architectural-antenna-with-combine8-8-channel-combiner-and-cable-bundle-black-470-to-608-mhz-comb8cp-arcb-creation-networks-16551.jpg?v=1793700526"},{"product_id":"audio-technica-rf-venue-cp-architectural-antenna-for-wireless-iem-systems-white-400-to-800-mhz-cp-arc","title":"RF Venue CP-ARC – CP Architectural IEM Antenna, White","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue CP-ARC is a circularly polarized UHF antenna engineered for permanent installed in-ear monitor (IEM) systems in commercial AV environments. Its slim 11\" x 11\" x 2\" enclosure mounts on any wall or ceiling surface, can be painted to match any interior finish, and delivers consistent RF coverage in a single fixture where traditional paddle antennas require precise orientation. With a 120° conical pattern and a typical working range of 200 feet, it is a practical choice for houses of worship, conference centers, and performing arts venues where aesthetics matter as much as performance.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe CP-ARC uses right-hand circular polarization (RHCP) to maintain a consistent signal level to IEM body packs regardless of performer orientation or movement across the stage. Unlike linearly polarized LPDA or paddle antennas, which require careful alignment and can fade as a performer rotates, the CP-ARC delivers predictable coverage across its full 120° hypercardioid beam pattern. The antenna covers the full 470–928 MHz UHF band with a 3 dBi gain at 500 MHz and a 10 dB average return loss, making it compatible with virtually every professional wireless IEM system on the market — including those from Shure, Sennheiser, Lectrosonics, and Audio-Technica.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward: the CP-ARC ships with both ceiling and wall hardware mounting kits, and its matte white enclosure accepts standard interior paint without affecting RF performance. A single BNC-F connector on the rear of the enclosure connects directly to your IEM transmitter or antenna distribution system. For large venues or multi-zone IEM deployments, multiple CP-ARC units can be distributed throughout the space using an RF Venue antenna distribution system for extended coverage. The CP-ARCB version of this product is available in black for darker interiors.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Hand Circular Polarization (RHCP)\u003c\/strong\u003e — Maintains consistent signal to IEM body packs regardless of performer orientation, eliminating the polarization fading common with paddle antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Frequency Coverage\u003c\/strong\u003e — Operates across 470–928 MHz (458 MHz bandwidth), compatible with virtually all professional UHF IEM systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArchitectural Form Factor\u003c\/strong\u003e — Slim 11\" x 11\" x 2\" enclosure installs flush to any wall or ceiling surface and accepts paint to blend into any interior finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120° Conical Beam Pattern\u003c\/strong\u003e — Hypercardioid coverage with a typical working range of approximately 200 feet from the antenna to the performer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation-Independent Installation\u003c\/strong\u003e — Mounts in any orientation on wall or ceiling without affecting RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Mounting Hardware Included\u003c\/strong\u003e — Ships with both ceiling and wall mounting kits, ready for immediate installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC-F Connector\u003c\/strong\u003e — Standard BNC connection for direct interface with IEM transmitters, combiners, or antenna distribution systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship — permanent IEM systems for worship teams and clergy\u003c\/li\u003e\n\u003cli\u003eAuditorium — installed IEM coverage for performers on fixed stages\u003c\/li\u003e\n\u003cli\u003eConference room \/ boardroom — wireless IEM for presenters requiring clean-look installations\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room — single antenna covers rehearsal and performance spaces\u003c\/li\u003e\n\u003cli\u003eBroadcast studio — low-profile IEM antenna that keeps the set uncluttered\u003c\/li\u003e\n\u003cli\u003eTraining room — consistent IEM signal for instructors moving throughout the space\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–928 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBandwidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e458 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePolarization\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRHCP (Right-Hand Circular Polarization)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePattern Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHypercardioid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBeam Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGain @ 500 MHz\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAverage Return Loss\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC-F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e280 x 280 x 50 mm (11\" x 11\" x 2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.9 kg (2 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatte White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMount Location\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWall or ceiling, any orientation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-10–40°C (14–104°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~200 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded Accessories\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCeiling hardware mounting kit, wall hardware mounting kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the CP-ARC and a standard paddle antenna for IEM use?\u003c\/h3\u003e\n\u003cp\u003eStandard paddle (LPDA) antennas are linearly polarized, which means signal strength varies significantly as a performer moves and their body pack antenna changes angle relative to the receive antenna. The CP-ARC uses right-hand circular polarization, which maintains a more consistent signal level regardless of body pack orientation. For permanent installed IEM applications, this typically results in fewer dropouts and more predictable coverage.\u003c\/p\u003e\n\u003ch3\u003eCan the CP-ARC be used for wireless microphone receive as well as IEM transmit?\u003c\/h3\u003e\n\u003cp\u003eThe CP-ARC is designed primarily for IEM transmit applications. For wireless microphone receive, RF Venue recommends using LPDA or diversity fin antennas. Contact your AV integrator for system design guidance specific to your application.\u003c\/p\u003e\n\u003ch3\u003eHow many CP-ARC antennas are needed to cover a large venue?\u003c\/h3\u003e\n\u003cp\u003eOne CP-ARC provides approximately 200 feet of coverage within its 120° conical pattern. For larger venues or multi-zone coverage, multiple units connected to an RF Venue antenna distribution system can extend coverage area. System design will depend on venue layout, number of IEM channels, and RF environment.\u003c\/p\u003e\n\u003ch3\u003eDoes the CP-ARC work with all IEM brands and frequencies?\u003c\/h3\u003e\n\u003cp\u003eYes. The CP-ARC covers 470–928 MHz, which encompasses the operating ranges of virtually all professional UHF IEM systems from Shure, Sennheiser, Lectrosonics, Audio-Technica, Wisycom, and others. Always verify your specific IEM system's transmit frequency falls within this range before purchasing.\u003c\/p\u003e\n\u003ch3\u003eCan the CP-ARC be painted to match a room's interior?\u003c\/h3\u003e\n\u003cp\u003eYes. The matte white enclosure is designed to accept standard interior latex or acrylic paint without affecting RF performance. This is a key design feature for permanent installations in churches, conference centers, and performing arts facilities where visible antenna hardware is undesirable.\u003c\/p\u003e\n\u003ch3\u003eWhat connector does the CP-ARC use, and what cable is recommended?\u003c\/h3\u003e\n\u003cp\u003eThe CP-ARC uses a BNC-F (female) connector. RF Venue RG8X coaxial cable with BNC connectors is the recommended cable for runs from the antenna to the IEM transmitter or antenna distribution system. For runs over 50 feet, consider using an RF Venue in-line amplifier (ILAMP-ACT) to compensate for cable loss.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44434219729132,"sku":"CP-ARC","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-cp-architectural-antenna-for-wireless-iem-systems-white-400-to-800-mhz-cp-arc-creation-networks-48223.jpg?v=1757936212"},{"product_id":"audio-technica-rf-venue-cp-architectural-antenna-for-wireless-iem-systems-black-400-to-800-mhz-cp-arcb","title":"RF Venue CP-ARCB – CP Architectural IEM Antenna, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue CP-ARCB is a circularly polarized UHF antenna engineered for permanent installed in-ear monitor (IEM) systems in commercial AV environments. Functionally identical to the CP-ARC (white), the CP-ARCB features a matte black enclosure suited to dark-finish interiors, stage rigs, and broadcast environments where a white fixture would stand out. Its slim 11\" x 11\" x 2\" enclosure mounts on any wall or ceiling surface, can be painted to match any interior finish, and delivers consistent RF coverage in a single fixture where traditional paddle antennas require precise orientation. With a 120° conical pattern and a typical working range of 200 feet, it is a practical choice for houses of worship, conference centers, and performing arts venues where aesthetics matter as much as performance.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe CP-ARCB uses right-hand circular polarization (RHCP) to maintain a consistent signal level to IEM body packs regardless of performer orientation or movement across the stage. Unlike linearly polarized LPDA or paddle antennas, which require careful alignment and can fade as a performer rotates, the CP-ARCB delivers predictable coverage across its full 120° hypercardioid beam pattern. The antenna covers the full 470–928 MHz UHF band with a 3 dBi gain at 500 MHz and a 10 dB average return loss, making it compatible with virtually every professional wireless IEM system on the market — including those from Shure, Sennheiser, Lectrosonics, and Audio-Technica.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward: the CP-ARCB ships with both ceiling and wall hardware mounting kits, and its matte black enclosure accepts standard interior paint without affecting RF performance. A single BNC-F connector on the rear of the enclosure connects directly to your IEM transmitter or antenna distribution system. For large venues or multi-zone IEM deployments, multiple CP-ARCB units can be distributed throughout the space using an RF Venue antenna distribution system for extended coverage. The CP-ARC version of this product is available in white for lighter interiors.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Hand Circular Polarization (RHCP)\u003c\/strong\u003e — Maintains consistent signal to IEM body packs regardless of performer orientation, eliminating the polarization fading common with paddle antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Frequency Coverage\u003c\/strong\u003e — Operates across 470–928 MHz (458 MHz bandwidth), compatible with virtually all professional UHF IEM systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArchitectural Form Factor\u003c\/strong\u003e — Slim 11\" x 11\" x 2\" enclosure installs flush to any wall or ceiling surface and accepts paint to blend into any interior finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120° Conical Beam Pattern\u003c\/strong\u003e — Hypercardioid coverage with a typical working range of approximately 200 feet from the antenna to the performer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation-Independent Installation\u003c\/strong\u003e — Mounts in any orientation on wall or ceiling without affecting RF performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Mounting Hardware Included\u003c\/strong\u003e — Ships with both ceiling and wall mounting kits, ready for immediate installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC-F Connector\u003c\/strong\u003e — Standard BNC connection for direct interface with IEM transmitters, combiners, or antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Black Finish\u003c\/strong\u003e — Suited for dark-interior installations, stage rigs, and broadcast environments where the white CP-ARC would not blend in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship — permanent IEM systems for worship teams and clergy, especially in darker sanctuary interiors\u003c\/li\u003e\n\u003cli\u003eAuditorium — installed IEM coverage for performers on fixed stages with black ceiling grids or rigging\u003c\/li\u003e\n\u003cli\u003eBroadcast studio — low-profile black IEM antenna that keeps the set uncluttered\u003c\/li\u003e\n\u003cli\u003eTheater and live performance — black finish blends into fly systems and black-box theater environments\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room — single antenna covers rehearsal and performance spaces with dark-finish ceilings\u003c\/li\u003e\n\u003cli\u003eTraining room — consistent IEM signal for instructors moving throughout the space\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–928 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBandwidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e458 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePolarization\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRHCP (Right-Hand Circular Polarization)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePattern Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHypercardioid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBeam Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGain @ 500 MHz\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAverage Return Loss\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC-F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e280 x 280 x 50 mm (11\" x 11\" x 2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.9 kg (2 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMount Location\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWall or ceiling, any orientation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-10–40°C (14–104°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~200 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded Accessories\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCeiling hardware mounting kit, wall hardware mounting kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the CP-ARCB and the CP-ARC?\u003c\/h3\u003e\n\u003cp\u003eThe CP-ARCB and CP-ARC are functionally identical — same frequency range, same RHCP pattern, same specifications. The only difference is finish: the CP-ARCB is matte black and the CP-ARC is matte white. Choose based on your installation environment.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the CP-ARCB and a standard paddle antenna for IEM use?\u003c\/h3\u003e\n\u003cp\u003eStandard paddle (LPDA) antennas are linearly polarized, which means signal strength varies significantly as a performer moves and their body pack antenna changes angle relative to the receive antenna. The CP-ARCB uses right-hand circular polarization, which maintains a more consistent signal level regardless of body pack orientation. For permanent installed IEM applications, this typically results in fewer dropouts and more predictable coverage.\u003c\/p\u003e\n\u003ch3\u003eCan the CP-ARCB be used for wireless microphone receive as well as IEM transmit?\u003c\/h3\u003e\n\u003cp\u003eThe CP-ARCB is designed primarily for IEM transmit applications. For wireless microphone receive, RF Venue recommends using LPDA or diversity fin antennas. Contact your AV integrator for system design guidance specific to your application.\u003c\/p\u003e\n\u003ch3\u003eHow many CP-ARCB antennas are needed to cover a large venue?\u003c\/h3\u003e\n\u003cp\u003eOne CP-ARCB provides approximately 200 feet of coverage within its 120° conical pattern. For larger venues or multi-zone coverage, multiple units connected to an RF Venue antenna distribution system can extend coverage area. System design will depend on venue layout, number of IEM channels, and RF environment.\u003c\/p\u003e\n\u003ch3\u003eDoes the CP-ARCB work with all IEM brands and frequencies?\u003c\/h3\u003e\n\u003cp\u003eYes. The CP-ARCB covers 470–928 MHz, which encompasses the operating ranges of virtually all professional UHF IEM systems from Shure, Sennheiser, Lectrosonics, Audio-Technica, Wisycom, and others. Always verify your specific IEM system's transmit frequency falls within this range before purchasing.\u003c\/p\u003e\n\u003ch3\u003eCan the CP-ARCB be painted to match a room's interior?\u003c\/h3\u003e\n\u003cp\u003eYes. The matte black enclosure is designed to accept standard interior latex or acrylic paint without affecting RF performance. This makes it suitable for permanent installations where the fixture needs to blend into a specific ceiling or wall color.\u003c\/p\u003e\n\u003ch3\u003eWhat connector does the CP-ARCB use, and what cable is recommended?\u003c\/h3\u003e\n\u003cp\u003eThe CP-ARCB uses a BNC-F (female) connector. RF Venue RG8X coaxial cable with BNC connectors is the recommended cable for runs from the antenna to the IEM transmitter or antenna distribution system. For runs over 50 feet, consider using an RF Venue in-line amplifier (ILAMP-ACT) to compensate for cable loss.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44434226675948,"sku":"CP-ARCB","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-cp-architectural-antenna-for-wireless-iem-systems-black-400-to-800-mhz-cp-arcb-creation-networks-21663.jpg?v=1757936214"},{"product_id":"audio-technica-cpb-parts-kit-rf-venue-cp-beam-parts-kit-4-pack","title":"RF Venue CPB-PARTS-KIT – Parts Kit for CP Beam Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue CPB-PARTS-KIT includes four right-angle N Male to BNC adapters needed to connect the CP Beam antenna's N-type female connector to standard BNC coaxial cable used in wireless audio distribution systems. This parts kit is required for CP Beam antenna installations where BNC cable runs are used.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue CP Beam antenna uses N-type female connectors as its RF output interface. Since most wireless audio distribution systems and receivers use BNC connectors as the standard RF interconnect, a conversion adapter is required at the antenna connection point. The CPB-PARTS-KIT provides four right-angle N Male to BNC adapters — the quantity needed for a full CP Beam installation in a system with up to four cable feeds. The right-angle design allows the BNC cable to route parallel to the surface rather than projecting straight back, which is often necessary when the CP Beam is wall-mounted or ceiling-mounted with limited clearance behind the antenna. All four adapters are silver-finish and designed to maintain RF signal integrity at the N-to-BNC transition.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Angle Design\u003c\/strong\u003e — Allows BNC cable to exit parallel to the mounting surface, accommodating installations with limited clearance behind the antenna.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eN Male to BNC Conversion\u003c\/strong\u003e — Adapts the CP Beam's N-type female connector to standard BNC coaxial cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Pack\u003c\/strong\u003e — Four adapters included, covering full CP Beam installations with multiple cable connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor CP Beam Antenna\u003c\/strong\u003e — Designed specifically for use with the RF Venue CP Beam antenna series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrientation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRight-angle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Antenna\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRF Venue CP Beam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePackage Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.48 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBox Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.3 x 3.7 x 1.2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44434272616684,"sku":"CPB-PARTS-KIT","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-cpb-parts-kit-rf-venue-cp-beam-parts-kit-4-pack-creation-networks-24566.jpg?v=1757936221"},{"product_id":"audio-technica-d-arcb-diversity-architectural-antenna-for-wireless-microphones-black-470-to-616-mhz","title":"RF Venue D-ARCB – Black Diversity Architectural Antenna for Wireless Microphones","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue D-ARCB is a black Diversity Architectural Antenna designed for permanent wireless microphone installations in dark-finish environments. Using the same patent-pending dual-feed design as the white D-ARC, the D-ARCB provides both A and B diversity antenna outputs from a single slim black enclosure that mounts flush on any wall or ceiling and accepts non-metallic paint for custom color matching. Coverage is a 140-degree conical pattern with typical range to 200 feet, suitable for stage-wing, front-of-house, or ceiling placement.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe D-ARCB is the black-finish counterpart to the white D-ARC. Both are functionally identical in RF performance — the same patent-pending dual-feed antenna design, the same 140-degree conical coverage pattern, the same typical 200-foot range, and the same quick-install rear mounting plate. The D-ARCB is specified for installations in environments where a black antenna finish is appropriate: dark wall installations, exposed ceiling structures, theatrical spaces, and any venue with dark-finish AV hardware specifications.\u003c\/p\u003e\n\u003cp\u003eA single D-ARCB replaces two traditional LPDA paddle antennas, providing both A and B BNC diversity outputs from one installed unit. The slim profile mounts directly against a wall or ceiling surface with minimal protrusion. The pre-drilled rear mounting plate includes multiple hole patterns to suit different mounting substrates. Like the white version, the D-ARCB's enclosure can be painted with non-metallic paint to match any surrounding surface precisely — useful for installations where even the standard black finish needs to be customized to match a specific dark color scheme.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-d-arcb-diversity-architectural-antenna-for-wireless-microphones-black-470-to-616-mhz-creation-networks-84238.jpg?v=1757936222\" alt=\"RF Venue D-ARCB – Black Diversity Architectural Antenna for Wireless Microphones - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eThe D-ARCB is compatible with all major UHF wireless microphone systems in the 470–616 MHz range. For complete distribution packs including the D-ARCB, see the D-ARCBDISTRO4 (4-channel with DISTRO4) or D-ARCBD5 (5-channel with DISTRO5 HDR).\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Finish\u003c\/strong\u003e — Blends into dark interiors, exposed ceilings, and theatrical environments; functionally identical to the white D-ARC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Feed Diversity Design\u003c\/strong\u003e — Patent-pending design provides A and B outputs from a single unit, replacing two traditional paddle antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim Wall\/Ceiling-Mount Profile\u003c\/strong\u003e — Low-profile enclosure mounts flush on walls or ceilings with minimal visual footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable Enclosure\u003c\/strong\u003e — Accepts non-metallic paint for precise color matching to any dark surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140° Conical Coverage\u003c\/strong\u003e — Effective at stage wings, FOH, or ceiling positions with typical range to 200 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Installation\u003c\/strong\u003e — Pre-drilled rear mounting plate with multiple hole patterns; installs in minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with all UHF wireless microphone receivers in the 470–616 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship with dark-finish interior walls and permanent wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eAuditorium and theater with exposed dark ceiling structures\u003c\/li\u003e\n\u003cli\u003eConference room and boardroom with dark-finish AV specifications\u003c\/li\u003e\n\u003cli\u003eGovernment and corporate meeting spaces specifying black hardware\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room and training room fixed AV installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eD-ARCB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack (paintable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Design\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual-feed diversity (patent-pending)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e140° conical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 200 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA and B diversity (dual BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–616 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMount Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWall or ceiling (rear mounting plate included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between D-ARCB and D-ARC?\u003c\/h3\u003e\n\u003cp\u003eThe D-ARCB is the black finish version; the D-ARC is identical in white. Both provide the same RF performance, coverage pattern, and range. The choice is purely based on the installation environment's color requirements.\u003c\/p\u003e\n\u003ch3\u003eCan the D-ARCB be painted to match a specific dark color?\u003c\/h3\u003e\n\u003cp\u003eYes. The D-ARCB accepts any non-metallic paint, allowing it to be matched precisely to a specific wall or ceiling color. Metallic paints should be avoided.\u003c\/p\u003e\n\u003ch3\u003eDoes the D-ARCB need two separate cable runs?\u003c\/h3\u003e\n\u003cp\u003eYes. The D-ARCB has two BNC output connectors (A and B) that each require a separate coaxial cable run to the antenna distribution system. Two 25-foot cables are included in the D-ARCBDISTRO4 and D-ARCBD5 bundles.\u003c\/p\u003e\n\u003ch3\u003eWhat distribution systems are compatible with the D-ARCB?\u003c\/h3\u003e\n\u003cp\u003eThe D-ARCB is compatible with DISTRO4, DISTRO5 HDR, and DISTRO9 HDR. For complete packs, see D-ARCBDISTRO4 or D-ARCBD5.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the D-ARCB?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44434310037740,"sku":"D-ARCB","price":729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-d-arcb-diversity-architectural-antenna-for-wireless-microphones-black-470-to-616-mhz-creation-networks-84238.jpg?v=1757936222"},{"product_id":"audio-technica-d-arcbd9-rf-venue-diversity-architectural-antenna-distro9-hdr-9-channel-uhf-distribution-system-pack-black-470-to-616-mhz","title":"RF Venue D-ARCBD9 – Black Diversity Architectural Antenna and DISTRO9 HDR Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue D-ARCBD9 is a complete wireless microphone antenna system bundle pairing the black Diversity Architectural Antenna with the DISTRO9 HDR 9-channel antenna distribution system. This turnkey kit is the black-finish variant of the D-ARCD9, designed for installations where a dark antenna enclosure better matches the interior environment. The bundle includes all cables and hardware needed to deploy up to 9 channels of diversity wireless microphone distribution with a discreet, professionally installed antenna solution.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe D-ARCBD9 provides the same high-performance wireless microphone RF system as the D-ARCD9 but with the Black Diversity Architectural Antenna (D-ARCB). The black enclosure is well-suited for darker interior environments, modern commercial spaces, broadcast studios, and theater applications where white hardware would be visually inconsistent.\u003c\/p\u003e\n\u003cp\u003eThe Diversity Architectural Antenna uses a patent-pending dual-feed design that delivers both A and B diversity connections from a single wall- or ceiling-mounted unit, replacing the need for two separate directional paddle antennas. The slim-profile enclosure installs flush to surfaces with rear-mounted BNC jacks and can be painted to any color with standard latex paint. It provides 3 dBd gain across a 140-degree conical pattern with a typical coverage range of up to 200 feet.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-d-arcbd9-rf-venue-diversity-architectural-antenna-and-distro9-hdr-9-channel-uhf-distribution-system-pack-black-470-to-616-mhz-creation-networks-92503.jpg?v=1757936223\" alt=\"RF Venue D-ARCBD9 – Black Diversity Architectural Antenna and DISTRO9 HDR Pack - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eThe DISTRO9 HDR is a 1RU rackmount antenna distribution system with 9 diversity output channels, two zone inputs, and support for VHF, UHF, and 900 MHz frequency bands. It delivers over 60 dB of dynamic range with superior noise performance compared to passive distribution systems. ETL listed for compliance with municipal and government bid specifications. The included DC-Octopus cable allows the DISTRO9 HDR to power up to 9 compatible wireless receivers directly, eliminating individual power supplies at each receiver.\u003c\/p\u003e\n\u003cp\u003eAll bundle cables are RF Venue RG8X coaxial, including two 25-foot runs for the main antenna feeds and pre-cut interconnect cables for the distribution system connections.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiversity Architectural Antenna (Black)\u003c\/strong\u003e — Patent-pending dual-feed design delivers A and B diversity from a single slim-profile wall or ceiling mount; black finish for darker environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable Enclosure\u003c\/strong\u003e — Black housing can be painted with standard latex paint to match any interior color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140° Conical Coverage, 3 dBd Gain\u003c\/strong\u003e — Typical range up to 200 feet, suitable for conference rooms, auditoriums, and houses of worship.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDISTRO9 HDR Distribution System\u003c\/strong\u003e — 9 diversity channels in 1 RU across VHF, UHF, and 900 MHz with over 60 dB dynamic range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Zone Antenna Inputs\u003c\/strong\u003e — Supports large venues or multi-room deployments from a single DISTRO9 HDR.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascade to 17 Channels\u003c\/strong\u003e — Add a second DISTRO9 HDR for up to 17 channels in 2 RU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power for Receivers\u003c\/strong\u003e — DC-Octopus cable powers up to 9 compatible wireless receivers from the distribution system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Cabling Included\u003c\/strong\u003e — 25' RG8X cables, 1.5' and 2' interconnects, and DC distribution cable included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eETL Listed\u003c\/strong\u003e — Meets requirements for municipal, government, and institutional bid specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Diversity Architectural Antenna (Black)\u003c\/li\u003e\n\u003cli\u003e1x DISTRO9 HDR 9-Channel Antenna Distribution System with AC power cord\u003c\/li\u003e\n\u003cli\u003e2x 25' RG8X BNC coaxial cables\u003c\/li\u003e\n\u003cli\u003e10x 1.5' RG8X BNC interconnect cables\u003c\/li\u003e\n\u003cli\u003e10x 2' RG8X BNC interconnect cables\u003c\/li\u003e\n\u003cli\u003e1x DC-Octopus Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBroadcast studios and television production environments requiring dark-finish hardware\u003c\/li\u003e\n\u003cli\u003eBoardrooms and executive conference rooms with dark interior design\u003c\/li\u003e\n\u003cli\u003eHouses of worship with dark ceiling or wall surfaces\u003c\/li\u003e\n\u003cli\u003eTheaters and performing arts spaces with stage-black color schemes\u003c\/li\u003e\n\u003cli\u003eGovernment facilities requiring ETL-listed components\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms with up to 9 wireless microphone channels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiversity Architectural Antenna Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–698 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Gain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 dBd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Coverage Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e140° conical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Typical Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 200 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Average Return Loss\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-6.4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Polarization\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual (A and B diversity from single enclosure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Mounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWall or ceiling, any orientation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack (paintable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50–1000 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 diversity outputs, 2 zone inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Dynamic Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Output Isolation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60 dB @ 510 MHz; 80 dB @ 200 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR IIP3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 dBm @ VHF; 20+ dBm @ UHF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Form Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1RU rackmount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Cascade\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 17 channels with second DISTRO9 HDR in 2 RU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Certification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eETL listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the D-ARCBD9 and the D-ARCD9?\u003c\/h3\u003e\n\u003cp\u003eThe D-ARCBD9 includes the Black Diversity Architectural Antenna while the D-ARCD9 includes the white version. All other components, specifications, and bundle contents are identical. The black version is typically preferred for broadcast studios, theaters, and spaces with dark interior design.\u003c\/p\u003e\n\u003ch3\u003eCan the black antenna be painted to a different color?\u003c\/h3\u003e\n\u003cp\u003eYes. The enclosure accepts standard latex paint. While the default finish is black, it can be painted to match any interior color if the installation environment requires a specific finish.\u003c\/p\u003e\n\u003ch3\u003eIs this compatible with any wireless microphone brand?\u003c\/h3\u003e\n\u003cp\u003eYes. The bundle works with any wireless microphone system operating in the 470–698 MHz UHF TV band with standard 50-ohm BNC antenna connections.\u003c\/p\u003e\n\u003ch3\u003eDoes the system expand beyond 9 channels?\u003c\/h3\u003e\n\u003cp\u003eYes. A second DISTRO9 HDR can be cascaded from any output to support up to 17 wireless microphone channels in 2 RU of rack space without requiring a second antenna pair.\u003c\/p\u003e\n\u003ch3\u003eWhat does the DC-Octopus cable do?\u003c\/h3\u003e\n\u003cp\u003eThe DC-Octopus cable distributes 12 VDC power from the DISTRO9 HDR to up to 9 compatible wireless receiver units, eliminating the need for individual power adapters at each receiver location.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty covers this bundle?\u003c\/h3\u003e\n\u003cp\u003eRF Venue products are covered by a manufacturer warranty. Contact Creation Networks at creationnetworks.net for support.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44434319999212,"sku":"D-ARCBD9","price":3099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-d-arcbd9-rf-venue-diversity-architectural-antenna-and-distro9-hdr-9-channel-uhf-distribution-system-pack-black-470-to-616-mhz-creation-networks-92503.jpg?v=1793700528"},{"product_id":"audio-technica-d-arcbdistro4-rf-venue-diversity-architectural-antenna-distro4-4-channel-uhf-distribution-system-pack-black-470-to-616-mhz","title":"RF Venue D-ARCBDISTRO4 – 4-Channel Wireless Mic Pack, Black Architectural Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue D-ARCBDISTRO4 is a complete 4-channel wireless microphone antenna distribution pack featuring the black Diversity Architectural Antenna, the DISTRO4 4-channel UHF antenna distribution system, and all required black cables. Designed for commercial AV integrators, this pack delivers a clean, permanent wireless microphone installation in dark-finish environments — the D-ARCB's slim black profile mounts on walls or ceilings and can be painted to match any dark interior surface, while the DISTRO4 distributes antenna signals to up to four wireless receiver channels with 12VDC power distribution.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe D-ARCBDISTRO4 is the black-finish counterpart to the D-ARCDISTRO4. It pairs the D-ARCB (black Diversity Architectural Antenna) with the DISTRO4 active distribution system and a complete set of black cables. The D-ARCB features RF Venue's patent-pending dual-feed design, providing both A and B diversity outputs from a single slim antenna — eliminating the need for two separate paddle antennas. Its 140-degree conical pattern provides typical range to 200 feet from stage-wing, FOH, or ceiling positions.\u003c\/p\u003e\n\u003cp\u003eThe DISTRO4 is an active 1RU rack-mount antenna splitter that distributes the D-ARCB's A and B antenna signals to up to four wireless receiver channels, with 12VDC power distribution to connected receivers via DC jumper cables. The cascade output supports additional distribution units for larger channel counts. All hardware arrives ready to install: the bundle includes ten 1.5-foot black BNC jumper cables, four DC jumper cables, one AC power cord, and two 25-foot black RG8X coaxial cables.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-d-arcbdistro4-rf-venue-diversity-architectural-antenna-and-distro4-4-channel-uhf-distribution-system-pack-black-470-to-616-mhz-creation-networks-99098.jpg?v=1757936224\" alt=\"RF Venue D-ARCBDISTRO4 – 4-Channel Wireless Mic Pack, Black Architectural Antenna - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eCompatible with all major UHF wireless microphone receivers in the 470–616 MHz range, the D-ARCBDISTRO4 is an ideal solution for houses of worship, conference rooms, auditoriums, and corporate spaces where dark-finish AV hardware is specified.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Diversity Architectural Antenna\u003c\/strong\u003e — Slim, paintable black wall\/ceiling-mount profile; dual A\/B outputs in one unit replace two traditional paddle antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140° Conical Coverage\u003c\/strong\u003e — Broad pattern for stage-wing, FOH, or ceiling placement with typical range to 200 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDISTRO4 Included\u003c\/strong\u003e — Active 1RU 4-channel antenna distributor with 12VDC power distribution and cascade port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12VDC Power Distribution\u003c\/strong\u003e — Powers up to four connected wireless receivers via DC jumper cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Black Cable Package\u003c\/strong\u003e — Two 25' black RG8X cables, 10 x 1.5' BNC jumpers, 4 x DC jumpers, and AC power cord.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascade Output\u003c\/strong\u003e — DISTRO4 supports additional distribution units for channel count expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable Enclosure\u003c\/strong\u003e — Antenna accepts non-metallic paint for color matching to any installation environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e — Works with any UHF wireless microphone receiver in the 470–616 MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship with dark-finish interior and permanent wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eConference room and boardroom wireless audio installations\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center productions\u003c\/li\u003e\n\u003cli\u003eGovernment and corporate meeting spaces with black hardware specifications\u003c\/li\u003e\n\u003cli\u003eTraining room and multi-purpose room fixed AV installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBundle Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(1) D-ARCB Diversity Architectural Antenna (black), (1) DISTRO4, (2) 25' Black RG8X BNC Cables, (10) 1.5' BNC Jumpers, (4) DC Jumpers, (1) AC Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack (paintable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e140° conical, range to 200 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Outputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA and B diversity (dual BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO4 Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 receivers (plus cascade)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO4 Form Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1RU rack-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–616 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDC Power Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12VDC to up to 4 receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll major UHF wireless microphone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between D-ARCBDISTRO4 and D-ARCDISTRO4?\u003c\/h3\u003e\n\u003cp\u003eD-ARCBDISTRO4 includes the black-finish D-ARCB antenna with black cables; D-ARCDISTRO4 includes the white-finish D-ARC with white cables. Both are functionally identical.\u003c\/p\u003e\n\u003ch3\u003eHow does this pack differ from the D-ARCBD5?\u003c\/h3\u003e\n\u003cp\u003eThe D-ARCBDISTRO4 includes the DISTRO4 (4-channel, 1RU) for up to four channels. The D-ARCBD5 includes the DISTRO5 HDR (5-channel, half-rack) with HDR technology for up to five channels and better dynamic range performance.\u003c\/p\u003e\n\u003ch3\u003eCan the DISTRO4 cascade to support more receivers?\u003c\/h3\u003e\n\u003cp\u003eYes. The DISTRO4 cascade output connects to additional distributor units for systems requiring more than four wireless receiver channels.\u003c\/p\u003e\n\u003ch3\u003eWhere can I purchase the D-ARCBDISTRO4?\u003c\/h3\u003e\n\u003cp\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44434356109548,"sku":"D-ARCBDISTRO4","price":1529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-d-arcbdistro4-rf-venue-diversity-architectural-antenna-and-distro4-4-channel-uhf-distribution-system-pack-black-470-to-616-mhz-creation-networks-99098.jpg?v=1793700529"},{"product_id":"audio-technica-dc-jump-rf-venue-14-dc-jumper-cables-for-rack-products-4-pack","title":"RF Venue DC-JUMP – 14 in. DC Jumper Cables, 4-Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue DC-JUMP is a 4-pack of 14-inch DC jumper cables for connecting DC power between RF Venue rack-mount products. They are used to daisy-chain power connections between compatible RF Venue antenna distribution and combining systems within a rack installation.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eRF Venue rack-mount products such as the DISTRO4 provide DC power output connectors for powering adjacent receiver and distribution equipment within the rack. The DC-JUMP cables are pre-terminated 14-inch jumpers designed to make these rack-internal power connections clean and manageable. The 14-inch length is appropriate for 1U and 2U spacing within a standard 19-inch rack. The 4-pack quantity covers typical multi-device rack deployments. These jumpers are replacement or supplemental cables for RF Venue rack products — refer to your specific RF Venue hardware documentation for compatibility and connection diagrams.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e14-Inch Length\u003c\/strong\u003e — Designed for rack-internal DC power connections between adjacent RF Venue equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Pack\u003c\/strong\u003e — Four jumper cables per pack for multi-device rack deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Fit\u003c\/strong\u003e — Pre-terminated for RF Venue rack-mount product DC power connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 cables per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC power jumpers for RF Venue rack products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44434479349996,"sku":"DC-JUMP","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-dc-jump-rf-venue-14-dc-jumper-cables-for-rack-products-4-pack-creation-networks-31043.jpg?v=1757936225"},{"product_id":"audio-technica-dfinbd9-rf-venue-distro9-hdr-9-channel-antenna-distributor-bundle-black-wall-mount-diversity-fin","title":"RF Venue DFINBD9 – Black Wall Mount Diversity Fin and DISTRO9 HDR Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue DFINBD9 is a complete wireless microphone antenna upgrade bundle pairing the black Diversity Fin antenna with a black wall mount bracket and the DISTRO9 HDR 9-channel antenna distribution system. This is the permanently installed, wall-mount variant of the DFIND9 stand-mount bundle, designed for fixed AV installations where the antenna will be mounted on a wall rather than placed on a stand. The Diversity Fin’s patented cross-polarized design captures wireless microphone signals from performers in any orientation, and the DISTRO9 HDR distributes signal to up to 9 diversity channels with ETL-listed, high-dynamic-range performance.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DFINBD9 is the preferred choice for AV integrators installing wireless microphone RF infrastructure as a permanent, fixed system in black-interior venues. The black Diversity Fin Antenna mounts directly to a wall surface via the included black wall mount bracket, providing a clean, permanent installation that eliminates microphone stand clutter in the venue.\u003c\/p\u003e\n\u003cp\u003eThe Diversity Fin’s patented cross-polarized design combines a vertically polarized LPDA element with a horizontally polarized dipole mounted orthogonally. This hybrid approach ensures consistent signal capture regardless of whether a performer’s body pack transmitter is oriented vertically or horizontally, directly reducing the polarization dropout common with single-polarization antennas. Operating from 470 to 928 MHz, it covers the full UHF TV band and adjacent spectrum used by most professional wireless systems.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-dfinbd9-rf-venue-distro9-hdr-9-channel-antenna-distributor-bundle-black-wall-mount-diversity-fin-creation-networks-86792.jpg?v=1757936226\" alt=\"RF Venue DFINBD9 – Black Wall Mount Diversity Fin and DISTRO9 HDR Pack - Creation Networks\" style=\"max-width:100%;height:auto;\"\u003e\n\u003cp\u003eThe DISTRO9 HDR receives the two diversity antenna signals from the Diversity Fin and distributes them to up to 9 wireless microphone receiver channels. Its proprietary amplifier circuitry delivers over 60 dB of dynamic range, a significant improvement over passive splitter-based systems. Two zone antenna inputs allow the DISTRO9 HDR to serve large venues or multi-room spaces with antennas at different locations. The ETL listing satisfies certification requirements for government, institutional, and specification-driven commercial projects.\u003c\/p\u003e\n\u003cp\u003eAll bundle cabling is included: 25-foot RG8X runs from the wall-mounted antenna to the equipment rack, short interconnect cables for distribution to receivers, and the DC power kit for powering wireless receivers directly through the coaxial cable.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Wall Mount Configuration\u003c\/strong\u003e — Diversity Fin included with black wall mount bracket for permanent, fixed AV installation; no stand required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented Cross-Polarized Design\u003c\/strong\u003e — LPDA + dipole hybrid captures both vertical and horizontal polarization from a single antenna position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e470–928 MHz Coverage\u003c\/strong\u003e — Supports UHF TV band and adjacent spectrum for current and next-generation wireless systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDISTRO9 HDR 9-Channel Distribution\u003c\/strong\u003e — 1RU rackmount, over 60 dB dynamic range, two zone inputs, ETL listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascade to 17 Channels\u003c\/strong\u003e — Add a second DISTRO9 HDR for 17 channels in 2 RU from the same antenna.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power for Receivers\u003c\/strong\u003e — DC-KIT-D9 powers compatible wireless receivers through the distribution system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Cabling Included\u003c\/strong\u003e — All RG8X antenna runs and interconnect cables provided.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eETL Listed\u003c\/strong\u003e — Meets certification requirements for government and institutional specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Diversity Fin Antenna (Black) with black wall mount bracket\u003c\/li\u003e\n\u003cli\u003e1x DISTRO9 HDR 9-Channel Antenna Distribution System with AC power cord\u003c\/li\u003e\n\u003cli\u003e2x 25' RG8X BNC coaxial cables\u003c\/li\u003e\n\u003cli\u003e10x 1.5' RG8X BNC interconnect cables\u003c\/li\u003e\n\u003cli\u003e10x 2' RG8X BNC interconnect cables\u003c\/li\u003e\n\u003cli\u003e1x DC-KIT-D9 DC Power Distribution Kit for DISTRO9\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePermanently installed AV systems in auditoriums and performing arts centers\u003c\/li\u003e\n\u003cli\u003eHouses of worship with wall-mounted antenna infrastructure\u003c\/li\u003e\n\u003cli\u003eBroadcast studios with black-finish equipment requirements\u003c\/li\u003e\n\u003cli\u003eTheaters and black-box performance spaces\u003c\/li\u003e\n\u003cli\u003eGovernment and institutional facilities requiring ETL-listed components\u003c\/li\u003e\n\u003cli\u003eCorporate conference rooms with fixed wireless microphone infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiversity Fin Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–928 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiversity Fin Gain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.8 dBd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiversity Fin Impedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Polarization\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCross-polarized: LPDA (vertical) + dipole (horizontal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 mm (12\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e370 mm (14.6\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Mount\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWall mount (black bracket included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50–1000 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 diversity outputs, 2 zone inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Dynamic Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Output Isolation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60 dB @ 510 MHz; 80 dB @ 200 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR IIP3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 dBm @ VHF; 20+ dBm @ UHF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e480 × 45 × 250 mm (19\" × 1.8\" × 9.8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.7 kg (6 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDISTRO9 HDR Certification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eETL listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between DFINBD9 and DFIND9?\u003c\/h3\u003e\n\u003cp\u003eThe DFIND9 includes the Diversity Fin with a stand mount bracket for portable or semi-permanent deployment on a microphone stand. The DFINBD9 includes the same antenna with a black wall mount bracket for permanent installation on walls in black-interior environments. The DFINWD9 is the white wall mount version.\u003c\/p\u003e\n\u003ch3\u003eCan the wall mount bracket support different wall types?\u003c\/h3\u003e\n\u003cp\u003eThe included black wall mount bracket is designed for standard drywall, masonry, and wood stud installations. For specific mounting requirements in specialty surfaces, consult the installation documentation or contact Creation Networks for guidance.\u003c\/p\u003e\n\u003ch3\u003eIs this compatible with any wireless microphone brand?\u003c\/h3\u003e\n\u003cp\u003eYes. The DISTRO9 HDR and Diversity Fin work with any wireless microphone system with 50-ohm BNC antenna connections operating in the UHF TV band.\u003c\/p\u003e\n\u003ch3\u003eCan I cascade a second DISTRO9 HDR to this system?\u003c\/h3\u003e\n\u003cp\u003eYes. Any output on the DISTRO9 HDR can feed a second unit, providing up to 17 wireless microphone channels in 2 RU without a second antenna pair.\u003c\/p\u003e\n\u003ch3\u003eDoes the bundle include DC power distribution for wireless receivers?\u003c\/h3\u003e\n\u003cp\u003eYes. The DC-KIT-D9 is included to power compatible wireless receivers through the distribution system connections.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty covers this product?\u003c\/h3\u003e\n\u003cp\u003eRF Venue products are covered by a manufacturer warranty. Contact Creation Networks at creationnetworks.net for support.\u003c\/p\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44434622382316,"sku":"DFINBD9","price":3099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-dfinbd9-rf-venue-distro9-hdr-9-channel-antenna-distributor-bundle-black-wall-mount-diversity-fin-creation-networks-86792.jpg?v=1793700531"},{"product_id":"audio-technica-dfin-install-kitb-rf-venue-diversity-fin-install-parts-kits-black","title":"RF Venue DFIN-INSTALL-KITB – Diversity Fin Antenna Install Kit, Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe RF Venue DFIN-INSTALL-KITB provides the wall-mount brackets and hardware required for a permanent installation of the RF Venue Diversity Fin (DFIN) antenna. The black finish matches the DFIN antenna housing for a uniform appearance in dark-finish AV installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Diversity Fin antenna is designed for stand-mount or wall-mount deployment, and this install kit provides the hardware necessary for a permanent wall-mount installation. Included brackets and hardware secure the DFIN antenna to standard wall surfaces, positioning it for optimal antenna coverage in the venue. The black finish matches the Diversity Fin antenna enclosure for installations in dark-finish rooms, broadcast studios, black box theatres, and touring rigs with black hardware requirements. For white finish installations, see the RF Venue DFIN-INSTALL-KITW. The Diversity Fin antenna is sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall-Mount Brackets and Hardware\u003c\/strong\u003e — All hardware needed for permanent wall installation of the Diversity Fin antenna.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Finish\u003c\/strong\u003e — Matches the Diversity Fin antenna enclosure for a consistent appearance in dark-finish installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor RF Venue DFIN Antenna\u003c\/strong\u003e — Designed specifically for the RF Venue Diversity Fin antenna series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWall-mount brackets and hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Antenna\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRF Venue Diversity Fin (DFIN)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"RF Venue","offers":[{"title":"Default Title","offer_id":44434790809836,"sku":"DFIN-INSTALL-KITB","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-dfin-install-kitb-rf-venue-diversity-fin-install-parts-kits-black-creation-networks-54334.webp?v=1757936229"}],"url":"https:\/\/creationnetworks.net\/collections\/rf-venue.oembed?page=7","provider":"Creation Networks","version":"1.0","type":"link"}