{"title":"Microphone Antennas","description":"\u003cp dir=\"auto\"\u003eExplore professional microphone antennas and wireless microphone antenna systems designed for reliable, interference-free performance in demanding AV environments. Creation Networks offers high-quality Shure, Sennheiser, and other leading-brand antennas including active and passive directional antennas, omnidirectional antennas, antenna distribution systems, RF combiners, and remote antenna mounting kits with low-loss coaxial cabling.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePerfect for conference rooms, boardrooms, lecture halls, courtrooms, worship spaces, live events, command centers, and large multi-room installations. Our microphone antenna solutions ensure extended wireless range, reduced dropouts, improved signal stability, and seamless integration with Q-SYS, Shure, Extron, and Dante-enabled wireless microphone systems.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eFrom simple wall or ceiling-mounted antennas to complete enterprise RF distribution systems with spectrum monitoring, we deliver expert system design, professional installation, signal optimization, and full nationwide support through AVAILS 24\/7.\u003c\/p\u003e","products":[{"product_id":"shure-ua874-active-directional-antenna","title":"Shure UA874 Active Directional Antenna - UA874US","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA874 active directional antenna improves UHF wireless microphone reception in commercial AV installations where signal integrity and channel count matter. Its log periodic dipole array produces a directional cardioid pattern that focuses on the intended coverage area while rejecting RF interference from outside it. This makes the UA874US a practical choice for conference rooms, broadcast studios, and house of worship systems running Shure UHF wireless. An integrated amplifier with four gain settings helps compensate for cable loss across longer coax runs.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eDesigned as remote-antenna infrastructure for wireless microphone systems, the UA874 active directional antenna extends usable range and reliability in demanding commercial deployments. The log periodic dipole array delivers greater rejection of off-axis RF than a standard half-wave omnidirectional antenna, which reduces dropouts in RF-congested environments such as multi-room corporate facilities and broadcast studios. The built-in amplifier offers four gain settings so AV system designers can match the antenna to the coaxial cable run and minimize signal loss between the antenna and the receiver or distribution system. The UA874 stand-mounts, suspends from a ceiling, or wall-mounts using the included swivel adapter bracket, giving integrators flexible placement options for fixed installations. It operates with Shure receivers and antenna distribution systems that supply 10–15 V DC bias, and pairs naturally with UHF platforms like the ULX-D digital wireless system. For low-loss connection, Shure specifies 50 ohm coaxial cable such as RG-8U.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLog Periodic Dipole Array\u003c\/strong\u003e — A directional element design produces a cardioid pattern aimed at the coverage area for stronger on-axis reception than an omnidirectional antenna.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-Axis RF Rejection\u003c\/strong\u003e — The directional pattern rejects RF signals originating outside the coverage area, reducing interference and dropouts in congested wireless environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplifier with Four Gain Settings\u003c\/strong\u003e — Selectable gain compensates for varying degrees of coaxial cable signal loss across short and long antenna runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF and UHF Support\u003c\/strong\u003e — The UA874 series supports VHF and UHF wireless systems, making it suitable for a wide range of Shure wireless platforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting\u003c\/strong\u003e — The antenna can be stand-mounted, ceiling-suspended, or wall-mounted using the included swivel adapter bracket for fixed commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Bias Powered\u003c\/strong\u003e — The active amplifier draws 10–15 V DC bias directly from compatible Shure receivers or antenna distribution systems, eliminating a separate power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUA874US\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eActive directional antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAntenna Element\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLog periodic dipole array\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePolar Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCardioid (directional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eVHF and UHF wireless systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIntegrated, four selectable gain settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e10–15 V DC bias from receiver or distribution system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRecommended Cable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e50 ohm low-loss coaxial, such as RG-8U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eStand, ceiling-suspended, or wall via included swivel adapter bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhich Shure systems is the UA874 compatible with?\u003c\/strong\u003e\u003cbr\u003eThe UA874 works with Shure wireless receivers and antenna distribution systems that provide 10–15 V DC bias, including UHF platforms such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ulxd8-ulx-d-series-digital-wireless-gooseneck-microphone-base-transmitter\"\u003eULX-D series\u003c\/a\u003e. Confirm the frequency band of your system matches your regional spectrum plan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the antenna require a separate power supply?\u003c\/strong\u003e\u003cbr\u003eNo. The integrated amplifier is powered by 10–15 V DC bias delivered over the coaxial connection from a compatible receiver or antenna distribution system, so no external power supply is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should it be installed for best performance?\u003c\/strong\u003e\u003cbr\u003eMount the UA874 with a clear line of sight to the transmitters, aim the directional front of the antenna toward the coverage area, and use 50 ohm low-loss coax such as RG-8U. Set the amplifier gain to compensate for the loss of your specific cable run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be paired with an antenna distribution system?\u003c\/strong\u003e\u003cbr\u003eYes. In multi-channel commercial deployments the UA874 is commonly combined with a Shure antenna distribution system to feed several receivers from a single antenna pair, simplifying rack-mount RF infrastructure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eThis product is covered by the Shure manufacturer warranty. Contact Creation Networks for current warranty terms and commercial AV support.\u003c\/p\u003e\u003cp\u003eRelated infrastructure: \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-mxcwapt-a-access-point-receiver-us-only\"\u003eShure MXCWAPT-A Access Point Receiver\u003c\/a\u003e.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":42676378796268,"sku":"UA874US","price":444.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua874-active-directional-antenna-ua874us-creation-networks-59690.png?v=1757891398"},{"product_id":"shure-tour-grade-helical-antenna-ha-4540","title":"Shure Tour Grade Helical Antenna - HA-4540","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure HA-4540 helical antenna is a Tour Series (TS) directional antenna designed to deliver dropout-free RF performance for professional wireless microphone and in-ear monitoring systems. Its low-profile, compact form factor makes it well suited to touring productions and permanent installations where space and fast setup matter. As a directional antenna for wireless microphone systems, the HA-4540 focuses RF coverage to improve reception stability in demanding AV environments.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe HA-4540 is built for AV integrators and RF coordinators who need reliable wireless performance in venues with crowded spectrum or long transmission distances. The helical design provides directional reception that concentrates RF energy toward the performance or coverage area, reducing multipath issues and dropouts compared with simple omnidirectional whip antennas. Its lower-profile housing is engineered for easy storage and transport, an advantage for production companies and rental fleets that move antennas between events. In fixed installations, the compact directional antenna integrates into wireless microphone and in-ear monitoring deployments in auditoriums, houses of worship, and broadcast facilities. The HA-4540 connects into standard Shure wireless system RF chains and antenna distribution, supporting consistent coverage across the room. For AV system designers, this low-profile directional antenna is a practical upgrade path when stock antennas cannot maintain reliable links. It pairs with receivers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-single-digital-wireless-receiver-with-always-on-aes256-encryption-ps41us-power-supply-1-2-wave-antenna-and-rack-mounting-hardware-530-602-mhz-ulxd4gv-h50\"\u003eShure ULXD4 digital wireless receiver\u003c\/a\u003e when matched to the correct frequency band.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Helical Design\u003c\/strong\u003e — The helical antenna concentrates RF reception toward the coverage area, improving link stability over omnidirectional antennas in congested environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDropout-Free RF Performance\u003c\/strong\u003e — The Tour Series design is engineered to maintain reliable wireless links for microphone and in-ear monitoring systems during live and installed use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Form Factor\u003c\/strong\u003e — The compact housing stores and transports easily, making it practical for touring rigs and rental inventories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless System Integration\u003c\/strong\u003e — The antenna connects into standard Shure UHF wireless RF chains and antenna distribution for both portable and rack-mount deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Flexibility\u003c\/strong\u003e — The compact directional form supports placement on stands or mounting hardware in auditoriums, houses of worship, and broadcast facilities.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTour Series (TS) Helical Antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eAntenna Design\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eDirectional helical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eWireless microphone and in-ear monitoring RF reception\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLow-profile, compact for storage and transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eConfirm the antenna's operating frequency band matches your wireless system before deployment. For complete RF specifications, refer to the manufacturer documentation at shure.com.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the HA-4540 used for?\u003c\/strong\u003e It is a directional helical antenna that provides focused RF reception for professional wireless microphone and in-ear monitoring systems, improving range and reducing dropouts in installed and touring AV applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does a directional antenna improve wireless coverage?\u003c\/strong\u003e The helical design concentrates RF energy toward the coverage area rather than radiating equally in all directions, which helps maintain stable links in venues with crowded RF spectrum or longer transmission distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is the HA-4540 mounted?\u003c\/strong\u003e Its low-profile, compact housing is designed for fast setup on stands or mounting hardware and for easy storage and transport between events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill the HA-4540 work with my Shure wireless system?\u003c\/strong\u003e Confirm that the antenna's operating frequency band matches your wireless microphone or in-ear monitoring system before deployment, and integrate it into your existing RF chain or antenna distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs support and warranty available?\u003c\/strong\u003e The HA-4540 is backed by Shure's manufacturer warranty, and Creation Networks provides commercial AV sales and integration support.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43049824354540,"sku":"HA-4540","price":659.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-tour-grade-helical-antenna-ha-4540-creation-networks-76545.jpg?v=1757893150"},{"product_id":"shure-a57f-stand-adapter-for-sm62-sm63-sm81-vp64-ams26-ksm141-ksm137-and-wa380-1-2-wave-antenna","title":"Shure A57F Stand Adapter for SM62, SM63, SM81, VP64, AMS26, KSM141, KSM137 and WA380 1\/2 Wave Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure A57F is a microphone clip that mounts any 20 mm shaft-diameter microphone to a standard microphone stand. It is a common replacement and spare-part accessory for AV integrators maintaining Shure instrument and overhead microphones in conference rooms, houses of worship, and broadcast studios. The clip secures the microphone to standard 5\/8\"-27 threaded stands used throughout commercial AV.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThis stand adapter holds microphones with a 20 mm body diameter firmly to a microphone stand, providing dependable positioning for instrument and overhead miking in permanent installs and live production. AV system designers keep the A57F on hand as a replacement clip because it is the factory mount for several widely deployed Shure small-diaphragm condensers. The clip threads onto standard microphone stands and booms, so it integrates with the hardware already used across most commercial meeting spaces and worship facilities. It is a low-cost consumable that prevents downtime when an original clip is lost or damaged during frequent reconfiguration. The simple, durable design makes it suitable for both touring inventories and fixed-install racks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 mm Shaft Compatibility\u003c\/strong\u003e — Securely mounts microphones with a 20 mm shaft diameter to a standard microphone stand for stable positioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Stand Threading\u003c\/strong\u003e — Fits standard microphone stands and booms used throughout commercial AV installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Microphone Support\u003c\/strong\u003e — Compatible with Shure PG81, SM63, SM81, SM86, SM87, SM94, Beta 87, KSM137, KSM141, VP64, MX412, and MX418 microphones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement-Ready\u003c\/strong\u003e — Serves as a factory-equivalent spare clip, minimizing downtime when an original mount is lost or damaged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e — Built for repeated setup and teardown in touring and fixed-install environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eA57F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMicrophone clip \/ stand adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eShaft Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompatible Microphones\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePG81, SM63, SM81, SM86, SM87, SM94, Beta 87, KSM137, KSM141, VP64, MX412, MX418\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349230223596,"sku":"A57F","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-a57f-stand-adapter-for-sm62-sm63-sm81-vp64-ams26-ksm141-ksm137-and-wa380-12-wave-antenna-creation-networks-81454.jpg?v=1757900849"},{"product_id":"shure-axt630us-axt630-antenna-dist-470-698-mhz","title":"Shure AXT630US AXT630 ANTENNA DIST. 470-698 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure AXT630 is an Axient antenna distribution system covering 470-698 MHz, designed to feed multiple wireless microphone receivers from a shared pair of antennas. It is built for AV system designers and RF technicians running multi-channel wireless in broadcast studios, auditoriums, houses of worship, and large commercial events. Ultra-linear amplification and precision filtering help maintain a clean RF environment as channel counts grow.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eMulti-channel wireless microphone systems need clean, well-distributed RF, and feeding each receiver from its own antenna pair quickly becomes impractical, which is why an antenna distribution system is core infrastructure for professional wireless deployments. The AXT630 distributes filtered RF from a shared antenna pair across four BNC antenna output pairs, with ultra-linear amplification and precision wideband filtering. Selectable 60 MHz input filters match the frequency bands of Axient transmitters, providing extra protection from strong out-of-band signals and lowering the overall RF noise floor, while up to 15 dB of selectable RF attenuation supports signal-to-noise optimization. An unfiltered RF cascade port connects wideband devices such as the Axient Spectrum Manager. The unit is networkable over Ethernet, enabling Wireless Workbench (WWB6) control of filtering ranges, antenna power, and attenuation. As a commercial-grade RF component, it anchors reliable wireless coverage in demanding installations.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e470-698 MHz Coverage\u003c\/strong\u003e — The system operates across the 470-698 MHz range for UHF wireless microphone deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour BNC Antenna Output Pairs\u003c\/strong\u003e — Filtered RF is distributed to multiple receivers across four BNC antenna output pairs from a shared antenna pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable 60 MHz Input Filters\u003c\/strong\u003e — Input filters matched to Axient transmitter bands add protection from out-of-band signals and lower the RF noise floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable RF Attenuation\u003c\/strong\u003e — Up to 15 dB of selectable attenuation supports signal-to-noise optimization for each installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Cascade Port\u003c\/strong\u003e — An unfiltered cascade port connects wideband devices such as the Axient Spectrum Manager.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetworked Control\u003c\/strong\u003e — Ethernet networking enables WWB6 control of filtering ranges, antenna power, and attenuation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eShure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eAXT630 (AXT630US)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eAxient antenna distribution system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e470-698 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eAntenna Outputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e4 BNC antenna output pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eInput Filtering\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eSelectable 60 MHz input filters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eAttenuation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eUp to 15 dB selectable RF attenuation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCascade Port\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eUnfiltered RF cascade output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eEthernet networking, WWB6 control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eSpecifications per \u003ca href=\"https:\/\/www.shure.com\/en-US\/products\/accessories\/axt630\"\u003eShure\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow many receivers can the AXT630 feed?\u003c\/strong\u003e\u003cbr\u003eIt distributes filtered RF across four BNC antenna output pairs, allowing a shared antenna pair to feed multiple compatible receivers within the 470-698 MHz range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the RF cascade port for?\u003c\/strong\u003e\u003cbr\u003eThe unfiltered RF cascade port connects wideband devices such as the Axient Spectrum Manager, which need access to the full spectrum rather than a filtered band.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the input filtering improve performance?\u003c\/strong\u003e\u003cbr\u003eSelectable 60 MHz input filters matched to Axient transmitter bands add protection from strong out-of-band signals and lower the overall RF noise floor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be monitored and controlled remotely?\u003c\/strong\u003e\u003cbr\u003eYes. It is networkable over Ethernet and supports Wireless Workbench (WWB6) control of filtering ranges, antenna power, and attenuation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eThe AXT630 is covered by Shure's standard limited warranty. Refer to Shure's warranty documentation for the term and conditions applicable to your region.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349240971500,"sku":"AXT630US","price":1807.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-axt630us-axt630-antenna-dist-470-698-mhz-creation-networks-42564.jpg?v=1757900984"},{"product_id":"shure-axt644-antenna-directional-2-4-ghz","title":"Shure AXT644 Directional Antenna for AD610 ShowLink (2.4 GHz)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure AXT644 is a directional antenna for the AD610 ShowLink access point, operating at 2.4 GHz. It provides focused transmission and reception of 2.4 GHz ShowLink signals to extend coverage range and reject off-beam signals in professional wireless deployments. It is built for AV system designers and RF technicians managing Axient Digital wireless in broadcast studios, auditoriums, and large event spaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eShowLink remote control depends on a reliable 2.4 GHz link between the AD610 access point and the transmitters it manages, and a directional antenna concentrates that link where it is needed while rejecting interference from other directions. The AXT644 provides focused 2.4 GHz transmission and reception to extend ShowLink coverage range and reject off-beam signals, which is valuable in RF-congested venues. For AV teams running Axient Digital systems across auditoriums, broadcast studios, and houses of worship, directional ShowLink coverage improves remote-control reliability over distance. As a genuine Shure accessory, it integrates directly with the AD610 ShowLink access point.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAD610 ShowLink Compatibility\u003c\/strong\u003e — The antenna is designed for the AD610 ShowLink access point in Axient Digital systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.4 GHz Operation\u003c\/strong\u003e — It operates at 2.4 GHz, the band used for ShowLink remote control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Coverage\u003c\/strong\u003e — Focused transmission and reception extend ShowLink coverage range toward the intended area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-Beam Rejection\u003c\/strong\u003e — The directional pattern rejects off-beam signals, improving reliability in RF-congested venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Shure Accessory\u003c\/strong\u003e — As the factory antenna, it integrates directly with the AD610 ShowLink access point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eShure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eAXT644\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eDirectional antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e2.4 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eAD610 ShowLink Access Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eDirectional (focused transmission\/reception)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eSpecifications per Shure.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349241037036,"sku":"AXT644","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-axt644-directional-antenna-for-ad610-showlink-2-4-ghz-creation-networks-99232.jpg?v=1757900985"},{"product_id":"shure-ha-8089-professional-wireless-systems-helical-antenna-480-900-mhz","title":"Shure HA-8089 Helical Antenna for Wireless Microphone and Monitor Systems (480 - 900MHz)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure HA-8089 is a wide-band helical antenna for wireless microphone and in-ear monitor systems, delivering greater bandwidth and longer range gain for receivers, transmitters, and antenna distribution systems. Operating across the 480–900 MHz range, this directional antenna helps AV integrators extend reliable RF coverage in demanding commercial deployments. It is built for installations where consistent wireless performance is critical.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe HA-8089 is a directional helical antenna designed to improve the range and reliability of UHF wireless audio systems. Per Shure, it provides greater bandwidth and longer range gain for receivers, transmitters, and distribution systems, making it a strong choice for venues that run multiple wireless microphone or in-ear monitor channels. Its wide 480–900 MHz operating window spans many common Shure wireless system bands, supporting flexible frequency coordination across changing RF environments. AV system designers deploy directional antennas like the HA-8089 to focus RF coverage toward a stage or presentation area and to overcome distance or obstruction challenges that compromise body-pack and handheld transmitter performance. The antenna integrates with active antenna distribution to feed multiple receivers from a single antenna pair. For permanent installation in broadcast studios, auditoriums, and houses of worship, it provides a dependable foundation for wireless coverage. As shown in the product image, the helical element is housed for fixed mounting in a commercial RF chain.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreater Bandwidth and Range\u003c\/strong\u003e — The helical design delivers longer range gain for receivers, transmitters, and distribution systems in demanding installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide 480–900 MHz Coverage\u003c\/strong\u003e — The broad operating window spans many common UHF wireless bands for flexible frequency coordination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Coverage\u003c\/strong\u003e — The directional pattern focuses RF pickup toward the performance or presentation area to improve link reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistribution-System Ready\u003c\/strong\u003e — The antenna integrates with antenna distribution systems to feed multiple wireless receivers efficiently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial Installation Build\u003c\/strong\u003e — The antenna is intended for fixed mounting in permanent AV and RF infrastructure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eShure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eHA-8089\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eDirectional helical antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e480–900 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eUse\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eWireless microphone and in-ear monitor systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eGreater bandwidth and longer range gain for receivers, transmitters, and distribution systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the HA-8089 used for?\u003c\/strong\u003e\u003cbr\u003eIt is a directional helical antenna that extends the range and improves the reliability of UHF wireless microphone and in-ear monitor systems by providing greater bandwidth and longer range gain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat frequency range does it cover?\u003c\/strong\u003e\u003cbr\u003eThe HA-8089 operates across the 480–900 MHz range, which spans many common UHF wireless system bands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with an antenna distribution system?\u003c\/strong\u003e\u003cbr\u003eYes. The antenna is designed to work with receivers, transmitters, and antenna distribution systems so multiple wireless channels can share a single antenna pair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this antenna directional?\u003c\/strong\u003e\u003cbr\u003eYes. As a helical antenna it provides directional gain, which is used to focus RF coverage toward a stage or presentation area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for permanent installation?\u003c\/strong\u003e\u003cbr\u003eYes. The HA-8089 is intended for fixed mounting in commercial AV and RF infrastructure such as broadcast studios, auditoriums, and houses of worship. Confirm specific frequency coordination for your region during system design.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349255749868,"sku":"HA-8089","price":714.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ha-8089-helical-antenna-for-wireless-microphone-and-monitor-systems-480-900mhz-creation-networks-19413.png?v=1757901130"},{"product_id":"shure-ha-8091-domed-helical-antenna-460-900mhz","title":"Shure HA-8091 Domed Helical Antenna (460-900MHz)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure HA-8091 is a domed helical antenna engineered for drop-out-free RF performance with in-ear monitors, wireless microphones, and intercom systems. Its circularly polarized design and high gain help AV integrators maintain reliable wireless coverage across the 460–900 MHz range. The antenna works equally well as a transmitting or receiving element in commercial RF systems.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe HA-8091 represents a newer generation of antennas that deliver greater bandwidth, longer range, greater reliability, and more flexibility than traditional whip antennas. Unlike whip antennas that transmit and receive in a single polarization, the circular motion of the RF field emitted by a helical antenna distributes the signal through all possible polarizations, sharply reducing the risk of drop-outs in wireless audio systems. Its high gain ensures the strongest possible signal, which is critical for installations running multiple IEM or wireless microphone channels. The HA-8091 can serve as either a transmitting antenna for in-ear monitor systems or a receiving antenna for wireless microphones, giving AV system designers a single flexible component for both halves of the RF chain. For commercial deployment in broadcast studios, auditoriums, and houses of worship, the domed helical design provides dependable coverage where dropouts are unacceptable. As shown in the product image, the domed housing supports fixed mounting within a professional RF infrastructure.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-Out-Free RF Performance\u003c\/strong\u003e — The domed helical design delivers reliable coverage for IEM, wireless mics, and intercoms in demanding environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircular Polarization\u003c\/strong\u003e — The circular RF field distributes the signal across all polarizations, greatly reducing the risk of drop-outs compared with whip antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Gain\u003c\/strong\u003e — The high-gain design ensures the strongest possible signal for multi-channel wireless systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmit or Receive\u003c\/strong\u003e — The antenna excels as either a transmitting antenna for IEM systems or a receiving antenna for wireless microphones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide 460–900 MHz Coverage\u003c\/strong\u003e — The broad operating window spans many common UHF wireless bands for flexible frequency coordination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreater Range and Flexibility\u003c\/strong\u003e — The newer-generation design offers longer range and more deployment flexibility than traditional antennas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eShure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eHA-8091\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eDomed helical antenna (circularly polarized)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e460–900 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eUse\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eIEM, wireless microphones, intercoms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eOperation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eTransmitting or receiving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes a domed helical antenna better than a whip antenna?\u003c\/strong\u003e\u003cbr\u003eThe helical antenna emits a circularly polarized RF field that distributes the signal across all polarizations, greatly reducing drop-outs compared with single-polarization whip antennas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the HA-8091 be used for both IEM and wireless microphones?\u003c\/strong\u003e\u003cbr\u003eYes. It can serve as a transmitting antenna for in-ear monitor systems or a receiving antenna for wireless microphones, excelling in either role.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat frequency range does it cover?\u003c\/strong\u003e\u003cbr\u003eThe HA-8091 operates across the 460–900 MHz range, spanning many common UHF wireless bands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for permanent commercial installation?\u003c\/strong\u003e\u003cbr\u003eYes. The domed helical design is intended for fixed mounting in professional RF infrastructure such as broadcast studios, auditoriums, and houses of worship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it help with dropouts in multi-channel systems?\u003c\/strong\u003e\u003cbr\u003eYes. Its circular polarization and high gain are specifically designed to reduce dropouts and maintain the strongest possible signal in multi-channel wireless deployments.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349255782636,"sku":"HA-8091","price":989.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ha-8091-domed-helical-antenna-460-900mhz-creation-networks-14450.png?v=1757901131"},{"product_id":"shure-ha-8241-helical-antenna-944-952-mhz","title":"Shure HA-8241 PWS Helical Antenna (944-952 MHz)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure HA-8241 is a PWS (Personal Wireless Systems) helical antenna operating in the 944–952 MHz band, designed as a remote antenna for Shure UHF-R receivers, PSM transmitters, and antenna distribution systems. This directional helical antenna helps AV integrators extend reliable RF coverage for wireless microphone and in-ear monitor deployments. It is purpose-built for the 944–952 MHz frequency window.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe HA-8241 is a UHF remote antenna that improves wireless coverage and reliability for systems operating in the 944–952 MHz band. It is intended for use with Shure UHF-R wireless microphone receivers, PSM in-ear monitor transmitters, and antenna distribution systems, making it a focused choice for facilities already standardized on those platforms. As a helical antenna, it provides directional gain that AV system designers use to aim RF coverage toward a stage or performance area and to overcome distance or obstruction challenges. Deploying a remote antenna like the HA-8241 lets integrators position the antenna closer to transmitters or in-ear monitor receivers while keeping the rack-mounted electronics centralized. For permanent installation in broadcast studios, auditoriums, and houses of worship, it provides dependable coverage within its dedicated band. As shown in the product image, the helical element is housed for fixed mounting in a commercial RF chain.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated 944–952 MHz Band\u003c\/strong\u003e — The antenna is tuned for the 944–952 MHz window used by compatible Shure PWS equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF-R and PSM Compatibility\u003c\/strong\u003e — It is intended for Shure UHF-R receivers, PSM transmitters, and antenna distribution systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Helical Gain\u003c\/strong\u003e — The helical design provides directional gain to focus RF coverage toward the performance area and improve link reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Antenna Deployment\u003c\/strong\u003e — The remote design lets the antenna be positioned away from the rack to optimize coverage while centralizing electronics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistribution-System Ready\u003c\/strong\u003e — The antenna integrates with antenna distribution systems so multiple channels can share a single antenna setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eShure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eHA-8241\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eDirectional helical remote antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e944–952 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eShure UHF-R receivers, PSM transmitters, antenna distribution systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eUse\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eWireless microphone and in-ear monitor systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat systems is the HA-8241 compatible with?\u003c\/strong\u003e\u003cbr\u003eIt is intended for use with Shure UHF-R wireless microphone receivers, PSM in-ear monitor transmitters, and antenna distribution systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat frequency range does it cover?\u003c\/strong\u003e\u003cbr\u003eThe HA-8241 operates in the 944–952 MHz band, the dedicated window for compatible Shure PWS equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy use a remote antenna?\u003c\/strong\u003e\u003cbr\u003eA remote antenna can be positioned closer to transmitters or receivers and aimed toward the performance area, improving coverage while keeping rack electronics centralized.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with an antenna distribution system?\u003c\/strong\u003e\u003cbr\u003eYes. The HA-8241 works with antenna distribution systems so multiple wireless channels can share a single antenna setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for permanent installation?\u003c\/strong\u003e\u003cbr\u003eYes. The antenna is intended for fixed mounting in commercial AV and RF infrastructure. Confirm that your wireless equipment operates in the 944–952 MHz band before specifying.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349255848172,"sku":"HA-8241","price":714.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ha-8241-pws-helical-antenna-944-952-mhz-creation-networks-63906.png?v=1757901132"},{"product_id":"shure-mx405-c-5-shock-mounted-gooseneck-cardioid-includes-surface-mount-preamplifier","title":"Shure MX405\/C 5\" Gooseneck Mic with Surface Mount Preamplifier (Cardioid Capsule)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure MX405\/C is a 5-inch cardioid gooseneck microphone with an included surface-mount preamp, built for conference room, podium, and lectern installs. Its cardioid capsule focuses on the talker and rejects off-axis room noise, making it a clear choice for speech reinforcement and teleconferencing. The compact 5-inch gooseneck keeps sightlines low in boardrooms and meeting spaces where aesthetics matter. CommShield technology filters RF interference common in modern AV environments.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe MX405\/C is part of Shure's Microflex modular gooseneck system, which lets AV integrators match cartridge, gooseneck length, and base style to the room. This model pairs a cardioid condenser cartridge with a 12.7 cm (5 inch) gooseneck and ships with a surface-mount preamp for permanent installation on tables, podiums, or lecterns. A bi-color status indicator gives talkers clear on\/mute feedback, and logic input\/output supports remote LED and mute control through a DSP or automatic mixer. The modular platform is compatible with wired and wireless desktop bases, including the MX890 wireless desktop base when used with SLX wireless systems, giving designers flexibility across conferencing installs. CommShield technology improves RF filtering against interference from nearby wireless devices. This cardioid gooseneck microphone is intended for fixed commercial AV deployments rather than handheld use.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Condenser Cartridge\u003c\/strong\u003e — The cardioid pattern focuses on the talker and rejects off-axis room noise for clear speech capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Inch Gooseneck\u003c\/strong\u003e — The 12.7 cm gooseneck keeps the microphone low and unobtrusive on conference tables and podiums.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Surface-Mount Preamp\u003c\/strong\u003e — Ships with a surface-mount preamp for permanent flush installation on a table or lectern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-Color Status Indicator\u003c\/strong\u003e — The status LED gives talkers clear on\/mute feedback during meetings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogic Input\/Output\u003c\/strong\u003e — Logic connections allow remote LED and mute control through a DSP or automatic mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Base Compatibility\u003c\/strong\u003e — Works with wired and wireless desktop bases, including the MX890 for SLX wireless systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommShield Technology\u003c\/strong\u003e — Improved RF filtering reduces interference from cell phones and wireless devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCapsule\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCondenser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePolar Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCardioid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eGooseneck Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e5 in \/ 127 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e50 Hz to 17 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e124.2 dB SPL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e180 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eDynamic Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e96.2 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSignal-to-Noise Ratio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e66.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eOutput Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eProprietary (via preamp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e11 to 52 V Phantom, 2.0 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e0.4 lb \/ 181 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the MX405\/C include a preamp?\u003c\/strong\u003e\u003cbr\u003eYes. This model ships with a surface-mount preamp for permanent flush installation on a table, podium, or lectern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bases is it compatible with?\u003c\/strong\u003e\u003cbr\u003eAs part of the Microflex modular system, it works with wired and wireless desktop bases, including the MX890 wireless desktop base for SLX wireless systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the LED and mute be controlled by our mixer?\u003c\/strong\u003e\u003cbr\u003eYes. Logic input\/output supports remote LED and mute control through a DSP or automatic mixer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat phantom power does it require?\u003c\/strong\u003e\u003cbr\u003eIt operates on 11 to 52 V phantom power at 2.0 mA.\u003c\/p\u003e\n\u003cp\u003eSpecifications per Shure (shure.com). For a no-preamp version, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-mx405lp-c-5-shock-mounted-gooseneck-cardioid-less-preamplifier\"\u003eShure MX405LP\/C\u003c\/a\u003e, or browse the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-mx400smp-installed-shock-mount-preamplifier-sold-seperately-for-mx405-10-mics-coverplate-5-pin-xlr-female-connector-included-supports-standard-and-light-ring-microphones\"\u003eShure MX400SMP surface-mount preamp\u003c\/a\u003e.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349260599532,"sku":"MX405\/C","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-mx405c-5-gooseneck-mic-with-surface-mount-preamplifier-cardioid-capsule-creation-networks-14652.jpg?v=1757901249"},{"product_id":"shure-mx405-n-microphone-gooseneck-w-preamp","title":"Shure MX405\/N 5\" Gooseneck Mic with Surface Mount Preamplifier (LED Ring,No Capsule)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure MX405\/N is a 5-inch modular gooseneck microphone body with a surface-mount preamp and an LED status ring, supplied without a cartridge so integrators can choose the polar pattern that fits the room. It is designed for conference room, podium, and lectern installs where an interchangeable-cartridge approach simplifies stocking and future changes. The included surface-mount preamp supports permanent installation, and the LED ring provides clear on\/mute status. CommShield technology filters RF interference common in modern AV environments.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe MX405\/N is part of Shure's Microflex modular gooseneck system and ships as a 12.7 cm (5 inch) gooseneck with surface-mount preamp and LED light ring, but no microphone cartridge. This lets AV integrators add a cardioid, supercardioid, or mini-shotgun Microflex cartridge to match each space, and standardize on a single gooseneck body across a deployment. The surface-mount preamp permanently flush-mounts the microphone to a table, podium, or lectern, and logic input\/output supports remote LED and mute control through a DSP or automatic mixer. As part of the modular platform, it works with wired and wireless desktop bases for flexible conferencing installs. CommShield technology improves RF filtering against interference from nearby wireless devices. A compatible Microflex cartridge is required and sold separately.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Cartridge Included\u003c\/strong\u003e — Ships without a capsule so integrators can select the cardioid, supercardioid, or mini-shotgun pattern that fits the room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Surface-Mount Preamp\u003c\/strong\u003e — Ships with a surface-mount preamp for permanent flush installation on a table or lectern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Status Ring\u003c\/strong\u003e — The light ring provides clear on\/mute status feedback to talkers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Inch Gooseneck\u003c\/strong\u003e — The 12.7 cm gooseneck keeps the microphone low and unobtrusive on conference tables and podiums.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogic Input\/Output\u003c\/strong\u003e — Logic connections allow remote LED and mute control through a DSP or automatic mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommShield Technology\u003c\/strong\u003e — Improved RF filtering reduces interference from cell phones and wireless devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eModular Gooseneck Microphone Body (No Cartridge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompatible Cartridges\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMicroflex Cardioid, Supercardioid, Mini-Shotgun (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eGooseneck Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e5 in \/ 127 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePreamp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eSurface-Mount (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eStatus Indicator\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLED Light Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e11 to 52 V Phantom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLogic Input\/Output for remote LED and mute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eSpecifications per Shure (shure.com). To buy a model with the cartridge pre-installed, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-mx405-c-5-shock-mounted-gooseneck-cardioid-includes-surface-mount-preamplifier\"\u003eShure MX405\/C (cardioid)\u003c\/a\u003e or the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-mx405-s-5-shock-mounted-gooseneck-supercardioid-includes-surface-mount-preamplifier\"\u003eShure MX405\/S (supercardioid)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349260665068,"sku":"MX405\/N","price":293.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-mx405n-5-gooseneck-mic-with-surface-mount-preamplifier-led-ringno-capsule-creation-networks-80421.jpg?v=1757901251"},{"product_id":"shure-mx405-s-5-shock-mounted-gooseneck-supercardioid-includes-surface-mount-preamplifier","title":"Shure MX405\/S 5\" Gooseneck Mic with Surface Mount Preamplifier (Supercardioid Capsule)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure MX405\/S is a 5-inch supercardioid gooseneck microphone with an included surface-mount preamp, built for conference room, podium, and lectern installs. Its supercardioid capsule offers a tighter pickup angle than cardioid, isolating the talker and improving gain-before-feedback in busier rooms. The compact 5-inch gooseneck keeps sightlines low in boardrooms and meeting spaces where aesthetics matter. CommShield technology filters RF interference common in modern AV environments.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe MX405\/S is part of Shure's Microflex modular gooseneck system and pairs a supercardioid condenser cartridge with a 12.7 cm (5 inch) gooseneck. The supercardioid pattern narrows the pickup window relative to cardioid, which helps reject side and ambient noise and is useful where talkers sit close to other sound sources or where higher gain-before-feedback is needed. The model ships with a surface-mount preamp for permanent installation on a table, podium, or lectern, and provides a bi-color status indicator plus logic input\/output for remote LED and mute control through a DSP or automatic mixer. As part of the modular platform, it is compatible with wired and wireless desktop bases, including the MX890 wireless desktop base for SLX wireless systems. CommShield technology improves RF filtering against interference from nearby wireless devices. This supercardioid gooseneck microphone is intended for fixed commercial AV deployments.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupercardioid Condenser Cartridge\u003c\/strong\u003e — The tighter supercardioid pattern isolates the talker and improves rejection of side and ambient noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher Gain-Before-Feedback\u003c\/strong\u003e — The narrow pickup window helps maintain gain-before-feedback in busier or acoustically live rooms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Inch Gooseneck\u003c\/strong\u003e — The 12.7 cm gooseneck keeps the microphone low and unobtrusive on conference tables and podiums.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Surface-Mount Preamp\u003c\/strong\u003e — Ships with a surface-mount preamp for permanent flush installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-Color Status Indicator\u003c\/strong\u003e — The status LED gives talkers clear on\/mute feedback during meetings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogic Input\/Output\u003c\/strong\u003e — Logic connections allow remote LED and mute control through a DSP or automatic mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommShield Technology\u003c\/strong\u003e — Improved RF filtering reduces interference from cell phones and wireless devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCapsule\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCondenser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePolar Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eSupercardioid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eGooseneck Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e5 in \/ 127 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e50 Hz to 17 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e122.7 dB SPL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSignal-to-Noise Ratio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e67.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSensitivity (1 kHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e-34 dBV\/Pa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e180 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eDynamic Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e96.2 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e11 to 52 V Phantom, 2.0 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e0.4 lb \/ 181 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow does supercardioid differ from cardioid here?\u003c\/strong\u003e\u003cbr\u003eThe supercardioid pattern has a narrower pickup angle than cardioid, isolating the talker more tightly and improving rejection of side and ambient noise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the MX405\/S include a preamp?\u003c\/strong\u003e\u003cbr\u003eYes. This model ships with a surface-mount preamp for permanent flush installation on a table, podium, or lectern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the LED and mute be controlled by our mixer?\u003c\/strong\u003e\u003cbr\u003eYes. Logic input\/output supports remote LED and mute control through a DSP or automatic mixer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat phantom power does it require?\u003c\/strong\u003e\u003cbr\u003eIt operates on 11 to 52 V phantom power at 2.0 mA.\u003c\/p\u003e\n\u003cp\u003eSpecifications per Shure (shure.com). For a cardioid pattern, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-mx405-c-5-shock-mounted-gooseneck-cardioid-includes-surface-mount-preamplifier\"\u003eShure MX405\/C\u003c\/a\u003e, or for a directional lobar pattern, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-mx405-ms-5-shock-mounted-gooseneck-mini-shotgun-no-led-less-preamplifier\"\u003eShure MX405\/MS mini-shotgun\u003c\/a\u003e.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349260697836,"sku":"MX405\/S","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-mx405s-5-gooseneck-mic-with-surface-mount-preamplifier-supercardioid-capsule-creation-networks-83917.jpg?v=1757901252"},{"product_id":"shure-pa411-four-port-antenna-combiner","title":"Shure PA411 Four Port Antenna Combiner","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure PA411 is a four-port antenna combiner that consolidates RF signal and DC power for up to four Shure PSM300 wireless transmitters. It is the standard RF distribution accessory for multi-system PSM300 in-ear monitoring deployments, reducing antenna and power-supply clutter in racks. AV integrators use it to clean up RF management when running several P3T transmitters in the same venue. The compact half-rack form factor fits neatly into commercial monitoring racks.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eWhen a venue runs more than one PSM300 system, each transmitter would otherwise need its own antenna and power supply, crowding the rack and complicating RF coordination. The PA411 antenna combiner solves this by distributing a single antenna feed and DC power across up to four P3T transmitters from one half-rack unit. This simplifies installation, reduces cabling, and supports cleaner RF management in fixed installs and touring racks. It is well suited to houses of worship, auditoriums, and broadcast facilities deploying multiple channels of wireless in-ear monitoring. As a genuine Shure accessory, it is engineered specifically for PSM300 transmitter compatibility.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Transmitter Capacity\u003c\/strong\u003e — Distributes RF and DC power for up to four Shure PSM300 (P3T) transmitters from one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF and Power Consolidation\u003c\/strong\u003e — Combines antenna feed and power distribution to reduce the number of antennas and power supplies required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack Form Factor\u003c\/strong\u003e — The compact half-rack chassis mounts cleanly in commercial monitoring and equipment racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimplified RF Management\u003c\/strong\u003e — Centralizing RF distribution streamlines coordination and cabling in multi-system deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePSM300 Compatibility\u003c\/strong\u003e — Engineered specifically for the Shure PSM300 personal monitoring system for reliable integration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eAntenna combiner for PSM300 wireless systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eTransmitter Capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eUp to 4 PSM300 (P3T) transmitters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eDistributes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eRF signal and DC power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCompact half-rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePA411\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow many transmitters does the PA411 support?\u003c\/strong\u003e It distributes RF and DC power for up to four PSM300 (P3T) transmitters from a single half-rack unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich monitoring system is it compatible with?\u003c\/strong\u003e The PA411 is designed for the Shure PSM300 system. It pairs naturally with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-p3tr112tw-h20-psm300-twin-pack\"\u003eShure PSM300 Twin Pack Wireless In-Ear Monitor Kit\u003c\/a\u003e in multi-system deployments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I need more than four channels?\u003c\/strong\u003e For higher channel counts, step up to a dedicated four-channel combiner such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa421b-four-channel-antenna-combiner-470-865-mhz\"\u003eShure PA421B Four-Channel Antenna Combiner\u003c\/a\u003e, which adds active RF amplification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it mount in a standard rack?\u003c\/strong\u003e Yes. The half-rack chassis installs in standard commercial AV equipment racks with appropriate hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This is a genuine Shure product covered by Shure's standard manufacturer warranty. Contact our team for commercial AV support.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349272363244,"sku":"PA411","price":866.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-pa411-four-port-antenna-combiner-creation-networks-71746.jpg?v=1757901397"},{"product_id":"shure-pa421b-four-channel-antenna-combiner-470-865-mhz","title":"Shure PA421B Four-channel Antenna Combiner, 470-865 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure PA421B antenna combiner is a four-channel PSM antenna combiner built for commercial AV installations that run several Shure personal monitoring systems from a single transmit antenna. It merges the RF outputs of up to four PSM transmitters across the 470-865 MHz range, reducing intermodulation distortion and multipath dropouts. For integrators planning in-ear monitor RF distribution in fixed-install environments, this 470-865 MHz wireless monitor combiner simplifies antenna infrastructure and improves signal reliability. It directly replaces the legacy PA421A.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-pa421b-four-channel-antenna-combiner-470-865-mhz-creation-networks-89940.jpg?v=1757901398\" alt=\"Shure PA421B four-channel PSM antenna combiner\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe PA421B is an active broadband antenna combiner that streamlines simultaneous operation of many PSM systems at one venue. Instead of mounting a separate transmit antenna for every transmitter, the integrator routes up to four P3T, P9T, or P10T transmitters into the combiner and feeds a single shared antenna. This four-channel PSM antenna combiner consolidates RF in the rack and frees panel space in crowded equipment rooms. By combining outputs into one antenna feed, it lowers the antenna-to-antenna interference common to dense wireless deployments. The PA421B is compatible with Shure PSM 300, PSM 900, and PSM 1000 systems, making it a practical fit for venues standardizing on Shure monitoring. It is engineered for rack-mount integration alongside other commercial-grade wireless infrastructure. For higher channel counts, integrators can step up to the eight-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa821b-eight-channel-antenna-combiner-470-865-mhz\"\u003eShure PA821B\u003c\/a\u003e, or specify the higher-band \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa421bx-four-channel-antenna-combiner-865-960-mhz\"\u003ePA421BX\u003c\/a\u003e for 865-960 MHz operation.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-to-One RF Combining\u003c\/strong\u003e — Merges the outputs of up to four PSM transmitters into a single antenna feed to simplify wireless monitoring infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWideband 470-865 MHz Coverage\u003c\/strong\u003e — Supports broadband operation across the 470-865 MHz range for flexible frequency coordination in commercial deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Interference\u003c\/strong\u003e — Lowers intermodulation distortion and multipath dropouts compared with running multiple independent transmit antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Broadband Design\u003c\/strong\u003e — The active circuit helps offset combining losses so transmit signal strength is maintained across all four channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Shure Compatibility\u003c\/strong\u003e — Works with P3T, P9T, and P10T transmitters across PSM 300, PSM 900, and PSM 1000 systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack-Ready Integration\u003c\/strong\u003e — Designed for installation in commercial AV equipment racks alongside other wireless components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect PA421A Replacement\u003c\/strong\u003e — Serves as a drop-in upgrade for installations built around the discontinued PA421A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePA421B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eActive broadband PSM antenna combiner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eFour-to-one (up to four transmitters into one antenna)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRF Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e470-865 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompatible Transmitters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eP3T, P9T, P10T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePSM 300, PSM 900, PSM 1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eReplaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePA421A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Shure systems work with the PA421B?\u003c\/strong\u003e\u003cbr\u003eIt is compatible with PSM 300, PSM 900, and PSM 1000 systems using P3T, P9T, or P10T transmitters operating in the 470-865 MHz range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many transmitters can the PA421B combine?\u003c\/strong\u003e\u003cbr\u003eUp to four PSM transmitters are combined into one antenna feed, reducing the number of transmit antennas required in the install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I scale beyond four channels?\u003c\/strong\u003e\u003cbr\u003eFor larger systems, the eight-channel PA821B handles up to eight transmitters on a single antenna, allowing you to standardize combiner hardware as channel counts grow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if my transmitters operate above 865 MHz?\u003c\/strong\u003e\u003cbr\u003eSpecify the PA421BX, which covers the 865-960 MHz band for regions and deployments using higher frequencies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it integrate into an AV rack?\u003c\/strong\u003e\u003cbr\u003eThe PA421B is built for rack-mount installation and connects between your PSM transmitters and a shared transmit antenna using standard coaxial antenna cabling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs support available for integration?\u003c\/strong\u003e\u003cbr\u003eThe PA421B is covered by Shure's standard manufacturer warranty, and Creation Networks can assist with specification and integration into commercial AV systems.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349272396012,"sku":"PA421B","price":2467.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-pa421b-four-channel-antenna-combiner-470-865-mhz-creation-networks-89940.jpg?v=1757901398"},{"product_id":"shure-pa421bx-four-channel-antenna-combiner-865-960-mhz","title":"Shure PA421BX Four-channel Antenna Combiner, 865-960 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure PA421BX antenna combiner is a four-channel PSM antenna combiner for commercial AV installations operating Shure personal monitoring systems in the 865-960 MHz band. It merges the RF outputs of up to four PSM transmitters onto a single transmit antenna, reducing intermodulation distortion and multipath dropouts. For integrators handling in-ear monitor RF distribution in fixed-install venues, this 865-960 MHz wireless monitor combiner consolidates antenna infrastructure and improves signal reliability. It is the higher-band counterpart to the 470-865 MHz PA421B.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-pa421bx-four-channel-antenna-combiner-865-960-mhz-creation-networks-71080.jpg?v=1757901399\" alt=\"Shure PA421BX four-channel PSM antenna combiner 865-960 MHz\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe PA421BX is an active broadband antenna combiner that streamlines simultaneous operation of multiple PSM systems at one venue in the 865-960 MHz range. Rather than mounting a separate transmit antenna for every transmitter, the integrator routes up to four PSM transmitters into the combiner and feeds a single shared antenna. This four-channel PSM antenna combiner consolidates RF in the rack and frees panel space in dense equipment rooms. Combining outputs into one antenna feed lowers the antenna-to-antenna interference common to crowded wireless deployments. The PA421BX is compatible with Shure PSM 300, PSM 900, and PSM 1000 systems operating in its frequency band. It is engineered for rack-mount integration alongside other commercial-grade wireless infrastructure. For higher channel counts, integrators can move to the eight-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa821bx-eight-channel-antenna-combiner-865-960-mhz\"\u003eShure PA821BX\u003c\/a\u003e, or select the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa421b-four-channel-antenna-combiner-470-865-mhz\"\u003ePA421B\u003c\/a\u003e for 470-865 MHz operation.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-to-One RF Combining\u003c\/strong\u003e — Merges the outputs of up to four PSM transmitters into a single antenna feed to simplify wireless monitoring infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e865-960 MHz Coverage\u003c\/strong\u003e — Supports broadband operation across the 865-960 MHz range for regions and deployments using higher frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Interference\u003c\/strong\u003e — Lowers intermodulation distortion and multipath dropouts compared with running multiple independent transmit antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Broadband Design\u003c\/strong\u003e — The active circuit helps offset combining losses so transmit signal strength is maintained across all four channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Shure Compatibility\u003c\/strong\u003e — Works with PSM 300, PSM 900, and PSM 1000 transmitters operating in the 865-960 MHz band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack-Ready Integration\u003c\/strong\u003e — Designed for installation in commercial AV equipment racks alongside other wireless components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePA421BX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eActive broadband PSM antenna combiner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eFour-to-one (up to four transmitters into one antenna)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRF Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e865-960 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePSM 300, PSM 900, PSM 1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat frequency band does the PA421BX cover?\u003c\/strong\u003e\u003cbr\u003eIt operates across the 865-960 MHz range, serving deployments that use higher frequencies than the 470-865 MHz PA421B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many transmitters can it combine?\u003c\/strong\u003e\u003cbr\u003eUp to four PSM transmitters are merged into one antenna feed, reducing the number of transmit antennas in the install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Shure systems are compatible?\u003c\/strong\u003e\u003cbr\u003eIt works with PSM 300, PSM 900, and PSM 1000 personal monitoring systems operating in its frequency band.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I scale beyond four channels?\u003c\/strong\u003e\u003cbr\u003eThe eight-channel PA821BX handles up to eight transmitters on a single antenna for larger installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it integrate into an AV rack?\u003c\/strong\u003e\u003cbr\u003eThe PA421BX is built for rack-mount installation and connects between your PSM transmitters and a shared transmit antenna using standard coaxial antenna cabling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs support available for integration?\u003c\/strong\u003e\u003cbr\u003eThe PA421BX is covered by Shure's standard manufacturer warranty, and Creation Networks can assist with specification and integration into commercial AV systems.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349272428780,"sku":"PA421BX","price":2467.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-pa421bx-four-channel-antenna-combiner-865-960-mhz-creation-networks-71080.jpg?v=1757901399"},{"product_id":"shure-pa805swb-passive-directional-antenna-470-952-mhz-includes-10-bnc-bnc-cable","title":"Shure Directional Antenna for PSM Systems (470-952MHz) - PA805SWB","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure PA805SWB is a passive directional antenna for PSM wireless systems, engineered to extend range and reduce interference in commercial AV installations. Covering a wide 470-952 MHz range with 6.5 dBi of typical gain, it focuses RF energy toward the coverage area instead of radiating in all directions. For integrators deploying in-ear monitoring in fixed-install venues, this directional PSM antenna improves signal reliability over standard omnidirectional half-wave antennas. It mounts on a microphone stand or to a wall using the integral swivel adapter bracket.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-directional-antenna-for-psm-systems-470-952mhz-pa805swb-creation-networks-45809.jpg?v=1757901402\" alt=\"Shure PA805SWB passive directional antenna for PSM systems\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe PA805SWB delivers a directional, cardioid radiation pattern with a 100-degree 3 dB beam width, concentrating transmit energy where performers and presenters need it. Its wideband 470-952 MHz coverage makes it a flexible choice for installations that span multiple PSM frequency bands. A 50 ohm female BNC connector and included 10 ft BNC-to-BNC coaxial cable simplify connection to a PSM transmitter or antenna combiner. The positive-action swivel adapter adjusts from 0 to 90 degrees and accepts a standard 5\/8 in.-27 thread for mic-stand or wall mounting in commercial deployments. Shure recommends low-loss 50 ohm cable such as the UA825 (25 ft) or UA850 (50 ft) for longer runs to minimize signal loss. When combining multiple PSM antennas, pair it with a \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa821b-eight-channel-antenna-combiner-470-865-mhz\"\u003eShure PA821B antenna combiner\u003c\/a\u003e. For narrow-band 944-952 MHz deployments, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa805x-passive-directional-antenna-944-952-mhz\"\u003ePA805X\u003c\/a\u003e is the compact alternative.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Cardioid Pattern\u003c\/strong\u003e — Focuses RF toward the coverage area with a 100-degree 3 dB beam width to reduce interference and reflections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWideband 470-952 MHz Coverage\u003c\/strong\u003e — Supports a broad frequency range that spans multiple PSM bands for flexible installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5 dBi Typical Gain\u003c\/strong\u003e — Extends usable range compared with omnidirectional half-wave antennas in commercial venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Swivel Adapter\u003c\/strong\u003e — Adjusts from 0 to 90 degrees with a standard 5\/8 in.-27 thread for mic-stand or wall mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Connectivity\u003c\/strong\u003e — A 50 ohm female BNC connector and included 10 ft coaxial cable streamline connection to transmitters or combiners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombiner-Ready\u003c\/strong\u003e — Works with a PA821 antenna combiner when multiple PSM systems share a single transmit antenna.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePA805SWB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePassive directional antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eAntenna Gain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e6.5 dBi typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003e3 dB Beam Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRadiation Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eDirectional; cardioid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRF Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e470-952 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e50 ohm, female, BNC-type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSwivel Adapter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eAdjustable 0 to 90 degrees, standard 5\/8 in.-27 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e334 mm H x 378 mm W x 27.9 mm D (13.15 x 14.88 x 1.10 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e11.3 oz (319 g) with mounting accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich PSM systems is the PA805SWB compatible with?\u003c\/strong\u003e\u003cbr\u003eIts wide 470-952 MHz range covers Shure PSM transmitters operating across that span, making it suitable for most install PSM deployments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a directional antenna improve performance?\u003c\/strong\u003e\u003cbr\u003eBy focusing RF in a cardioid pattern with 100-degree beam width and 6.5 dBi gain, it extends range and reduces interference compared with omnidirectional half-wave antennas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it mounted in an installation?\u003c\/strong\u003e\u003cbr\u003eIt mounts on a microphone stand or to a wall using the integral swivel adapter, which adjusts from 0 to 90 degrees and accepts a standard 5\/8 in.-27 thread.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable should I use for longer runs?\u003c\/strong\u003e\u003cbr\u003eShure recommends low-loss 50 ohm cable such as the UA825 (25 ft) or UA850 (50 ft); the antenna ships with a 10 ft BNC-to-BNC cable for shorter runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use multiple antennas together?\u003c\/strong\u003e\u003cbr\u003eTo combine several PSM systems onto shared antennas, use a PA821 antenna combiner rather than mounting many independent transmit antennas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs support available?\u003c\/strong\u003e\u003cbr\u003eThe PA805SWB is covered by Shure's standard manufacturer warranty, and Creation Networks can assist with RF planning and integration.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349272658156,"sku":"PA805SWB","price":328.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-directional-antenna-for-psm-systems-470-952mhz-pa805swb-creation-networks-45809.jpg?v=1757901402"},{"product_id":"shure-pa805x-passive-directional-antenna-944-952-mhz","title":"Shure Passive Directional Antenna (944-952 MHz) - PA805X","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure PA805X is a passive directional antenna for PSM wireless systems operating in the 944-952 MHz band, built to extend range and reduce interference in commercial AV installations. With 6 dBi of typical gain and a focused cardioid pattern, it directs RF energy toward the coverage area rather than radiating omnidirectionally. For integrators deploying in-ear monitoring in this frequency band, the PA805X improves signal reliability over standard half-wave antennas in a compact form factor. It mounts on a microphone stand or to a wall using the integral swivel adapter bracket.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-passive-directional-antenna-944-952-mhz-pa805x-creation-networks-92764.jpg?v=1757901403\" alt=\"Shure PA805X passive directional antenna 944-952 MHz\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe PA805X delivers a directional, cardioid radiation pattern with a 100-degree 3 dB beam width, concentrating transmit energy where it is needed in a fixed install. Its 944-952 MHz coverage targets PSM systems operating in that band, and its smaller chassis is easy to place in tight or sightline-sensitive locations. A 50 ohm female BNC connector simplifies connection to a PSM transmitter or antenna combiner. The positive-action swivel adapter adjusts from 0 to 90 degrees and accepts a standard 5\/8 in.-27 thread for mic-stand or wall mounting in commercial deployments. Shure recommends low-loss 50 ohm cable such as the UA825 (25 ft) or UA850 (50 ft) for longer runs to minimize signal loss. When combining multiple PSM systems onto shared antennas, pair it with a \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa821bx-eight-channel-antenna-combiner-865-960-mhz\"\u003eShure PA821BX antenna combiner\u003c\/a\u003e. For wideband 470-952 MHz coverage, the larger \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa805swb-passive-directional-antenna-470-952-mhz-includes-10-bnc-bnc-cable\"\u003ePA805SWB\u003c\/a\u003e is the alternative.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Cardioid Pattern\u003c\/strong\u003e — Focuses RF toward the coverage area with a 100-degree 3 dB beam width to reduce interference and reflections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e944-952 MHz Coverage\u003c\/strong\u003e — Targets PSM systems operating in the 944-952 MHz band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 dBi Typical Gain\u003c\/strong\u003e — Extends usable range compared with omnidirectional half-wave antennas in commercial venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Chassis\u003c\/strong\u003e — At 226 mm H x 234 mm W and 8 oz, it fits sightline-sensitive or space-constrained mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Swivel Adapter\u003c\/strong\u003e — Adjusts from 0 to 90 degrees with a standard 5\/8 in.-27 thread for mic-stand or wall mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Connectivity\u003c\/strong\u003e — A 50 ohm female BNC connector streamlines connection to transmitters or combiners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePA805X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePassive directional antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eAntenna Gain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e6 dBi typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003e3 dB Beam Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRadiation Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eDirectional; cardioid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRF Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e944-952 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e50 ohm, female, BNC-type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSwivel Adapter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eAdjustable 0 to 90 degrees, standard 5\/8 in.-27 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e226 mm H x 234 mm W x 27.9 mm D (8.90 x 9.21 x 1.10 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e8 oz (227 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich PSM systems is the PA805X compatible with?\u003c\/strong\u003e\u003cbr\u003eIt covers the 944-952 MHz band and suits Shure PSM transmitters operating in that range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a directional antenna improve performance?\u003c\/strong\u003e\u003cbr\u003eBy focusing RF in a cardioid pattern with 100-degree beam width and 6 dBi gain, it extends range and reduces interference compared with omnidirectional half-wave antennas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it mounted in an installation?\u003c\/strong\u003e\u003cbr\u003eIt mounts on a microphone stand or to a wall using the integral swivel adapter, which adjusts from 0 to 90 degrees and accepts a standard 5\/8 in.-27 thread.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable should I use for longer runs?\u003c\/strong\u003e\u003cbr\u003eShure recommends low-loss 50 ohm cable such as the UA825 (25 ft) or UA850 (50 ft) to minimize signal loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I scale to multiple systems?\u003c\/strong\u003e\u003cbr\u003eUse a PA821BX antenna combiner to feed shared antennas rather than mounting many independent transmit antennas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs support available?\u003c\/strong\u003e\u003cbr\u003eThe PA805X is covered by Shure's standard manufacturer warranty, and Creation Networks can assist with RF planning and integration.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349272690924,"sku":"PA805X","price":328.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-passive-directional-antenna-944-952-mhz-pa805x-creation-networks-92764.jpg?v=1757901403"},{"product_id":"shure-pa821b-eight-channel-antenna-combiner-470-865-mhz","title":"Shure PA821B Eight-channel Antenna Combiner, 470-865 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure PA821B antenna combiner is an eight-channel PSM antenna combiner for commercial AV installations running large counts of Shure personal monitoring systems from a single transmit antenna. It merges the RF outputs of up to eight PSM transmitters across the 470-865 MHz range, reducing intermodulation distortion and multipath dropouts. For integrators designing in-ear monitor RF distribution in high-density venues, this 470-865 MHz wireless monitor combiner is the backbone of clean, scalable antenna infrastructure. It is the eight-channel counterpart to the four-channel PA421B.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-pa821b-eight-channel-antenna-combiner-470-865-mhz-creation-networks-13292.jpg?v=1757901404\" alt=\"Shure PA821B eight-channel PSM antenna combiner\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe PA821B is an active broadband antenna combiner that streamlines simultaneous operation of many PSM systems at one venue. Instead of mounting a transmit antenna for every transmitter, the integrator routes up to eight P3T, P9T, or P10T transmitters into the combiner and feeds a single shared antenna. This eight-channel PSM antenna combiner is suited to large-scale wireless monitoring deployments where rack space and RF coordination are at a premium. By combining outputs into one antenna feed, it lowers the antenna-to-antenna interference that degrades dense wireless systems. The PA821B is compatible with Shure PSM 300, PSM 900, and PSM 1000 systems, making it a strong fit for venues standardizing on Shure monitoring at scale. It is engineered for rack-mount integration alongside other commercial-grade wireless infrastructure. For smaller systems, the four-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa421b-four-channel-antenna-combiner-470-865-mhz\"\u003eShure PA421B\u003c\/a\u003e covers up to four transmitters, while the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa821bx-eight-channel-antenna-combiner-865-960-mhz\"\u003ePA821BX\u003c\/a\u003e serves 865-960 MHz deployments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-to-One RF Combining\u003c\/strong\u003e — Merges the outputs of up to eight PSM transmitters into a single antenna feed for large wireless monitoring systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWideband 470-865 MHz Coverage\u003c\/strong\u003e — Supports broadband operation across the 470-865 MHz range for flexible frequency coordination in commercial deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Interference\u003c\/strong\u003e — Lowers intermodulation distortion and multipath dropouts compared with running many independent transmit antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Broadband Design\u003c\/strong\u003e — The active circuit helps offset combining losses so transmit signal strength is maintained across all eight channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Shure Compatibility\u003c\/strong\u003e — Works with P3T, P9T, and P10T transmitters across PSM 300, PSM 900, and PSM 1000 systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack-Ready Integration\u003c\/strong\u003e — Designed for installation in commercial AV equipment racks alongside other wireless components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePA821B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eActive broadband PSM antenna combiner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eEight-to-one (up to eight transmitters into one antenna)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRF Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e470-865 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompatible Transmitters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eP3T, P9T, P10T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePSM 300, PSM 900, PSM 1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow many transmitters can the PA821B combine?\u003c\/strong\u003e\u003cbr\u003eUp to eight PSM transmitters are merged into one antenna feed, making it suited to large multi-channel monitoring systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Shure systems are compatible?\u003c\/strong\u003e\u003cbr\u003eIt works with PSM 300, PSM 900, and PSM 1000 systems using P3T, P9T, or P10T transmitters in the 470-865 MHz range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I choose the PA821B over the PA421B?\u003c\/strong\u003e\u003cbr\u003eChoose the PA821B when you need to combine more than four transmitters; the four-channel PA421B is the right fit for smaller systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat about higher-frequency bands?\u003c\/strong\u003e\u003cbr\u003eThe PA821BX covers the 865-960 MHz band for deployments using higher frequencies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it integrate into an AV rack?\u003c\/strong\u003e\u003cbr\u003eThe PA821B is built for rack-mount installation and connects between your PSM transmitters and a shared transmit antenna using standard coaxial antenna cabling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs support available for integration?\u003c\/strong\u003e\u003cbr\u003eThe PA821B is covered by Shure's standard manufacturer warranty, and Creation Networks can assist with specification and integration into commercial AV systems.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349272756460,"sku":"PA821B","price":5180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-pa821b-eight-channel-antenna-combiner-470-865-mhz-creation-networks-13292.jpg?v=1757901404"},{"product_id":"shure-pa821bx-eight-channel-antenna-combiner-865-960-mhz","title":"Shure PA821BX Eight-channel Antenna Combiner, 865-960 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure PA821BX antenna combiner is an eight-channel PSM antenna combiner for commercial AV installations operating large counts of Shure personal monitoring systems in the 865-960 MHz band. It merges the RF outputs of up to eight PSM transmitters onto a single transmit antenna, reducing intermodulation distortion and multipath dropouts. For integrators designing in-ear monitor RF distribution in high-density venues, this 865-960 MHz wireless monitor combiner is the backbone of scalable antenna infrastructure. It is the higher-band counterpart to the 470-865 MHz PA821B.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-pa821bx-eight-channel-antenna-combiner-865-960-mhz-creation-networks-75428.jpg?v=1757901405\" alt=\"Shure PA821BX eight-channel PSM antenna combiner 865-960 MHz\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe PA821BX is an active broadband antenna combiner that streamlines simultaneous operation of many PSM systems at one venue in the 865-960 MHz range. Rather than mounting a transmit antenna for every transmitter, the integrator routes up to eight PSM transmitters into the combiner and feeds a single shared antenna. This eight-channel PSM antenna combiner is suited to large-scale wireless monitoring deployments where rack space and RF coordination are at a premium. Combining outputs into one antenna feed lowers the antenna-to-antenna interference that degrades dense wireless systems. The PA821BX is compatible with Shure PSM 300, PSM 900, and PSM 1000 systems operating in its frequency band. It is engineered for rack-mount integration alongside other commercial-grade wireless infrastructure. For smaller systems, the four-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa421bx-four-channel-antenna-combiner-865-960-mhz\"\u003eShure PA421BX\u003c\/a\u003e covers up to four transmitters, while the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-pa821b-eight-channel-antenna-combiner-470-865-mhz\"\u003ePA821B\u003c\/a\u003e serves 470-865 MHz deployments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-to-One RF Combining\u003c\/strong\u003e — Merges the outputs of up to eight PSM transmitters into a single antenna feed for large wireless monitoring systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e865-960 MHz Coverage\u003c\/strong\u003e — Supports broadband operation across the 865-960 MHz range for regions and deployments using higher frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Interference\u003c\/strong\u003e — Lowers intermodulation distortion and multipath dropouts compared with running many independent transmit antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Broadband Design\u003c\/strong\u003e — The active circuit helps offset combining losses so transmit signal strength is maintained across all eight channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Shure Compatibility\u003c\/strong\u003e — Works with PSM 300, PSM 900, and PSM 1000 transmitters operating in the 865-960 MHz band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack-Ready Integration\u003c\/strong\u003e — Designed for installation in commercial AV equipment racks alongside other wireless components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePA821BX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eActive broadband PSM antenna combiner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eEight-to-one (up to eight transmitters into one antenna)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRF Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e865-960 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePSM 300, PSM 900, PSM 1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat frequency band does the PA821BX cover?\u003c\/strong\u003e\u003cbr\u003eIt operates across the 865-960 MHz range, serving deployments that use higher frequencies than the 470-865 MHz PA821B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many transmitters can it combine?\u003c\/strong\u003e\u003cbr\u003eUp to eight PSM transmitters are merged into one antenna feed, making it suited to large multi-channel monitoring systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Shure systems are compatible?\u003c\/strong\u003e\u003cbr\u003eIt works with PSM 300, PSM 900, and PSM 1000 personal monitoring systems operating in its frequency band.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I choose the PA821BX over the PA421BX?\u003c\/strong\u003e\u003cbr\u003eChoose the PA821BX when you need to combine more than four transmitters; the four-channel PA421BX fits smaller systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it integrate into an AV rack?\u003c\/strong\u003e\u003cbr\u003eThe PA821BX is built for rack-mount installation and connects between your PSM transmitters and a shared transmit antenna using standard coaxial antenna cabling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs support available for integration?\u003c\/strong\u003e\u003cbr\u003eThe PA821BX is covered by Shure's standard manufacturer warranty, and Creation Networks can assist with specification and integration into commercial AV systems.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349272789228,"sku":"PA821BX","price":5180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-pa821bx-eight-channel-antenna-combiner-865-960-mhz-creation-networks-75428.jpg?v=1757901405"},{"product_id":"shure-rk170-rfi-resistant-replacement-gooseneck-for-mx202-white-includes-30-cable","title":"Shure RK170 RFI-Resistant In-Line Preamplifier","description":"\u003cp dir=\"auto\"\u003eThe Shure RK170 is an RFI-resistant in-line preamplifier designed for Microflex microphones. It provides balanced output and phantom power compatibility while significantly reducing radio frequency interference from wireless devices and digital equipment. The compact design allows flexible cable routing between the microphone and mixer.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eConstructed for professional reliability, the RK170 delivers clean signal transmission with improved immunity to interference in challenging RF environments. It connects via TA4 mini 4-pin input and provides a standard 3-pin XLR balanced output.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThis preamplifier is ideal for boardrooms, conference rooms, houses of worship, education facilities, and installed sound systems using compatible Microflex lavalier, boundary, gooseneck, or overhead microphones. It supports clear, noise-free audio in environments with high wireless device activity.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFeatures Chart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003ctable dir=\"auto\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth data-col-size=\"md\"\u003eFeature\u003c\/th\u003e\n\u003cth data-col-size=\"lg\"\u003eBenefit\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eRFI Resistance\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eSignificantly reduces interference from mobile phones and digital wireless devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eBalanced Output\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eDelivers strong, noise-resistant signal to audio mixers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003ePhantom Power Compatibility\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eOperates on standard 11–52 V DC phantom power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eCompact In-Line Design\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eAllows flexible placement without adding visible bulk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eTA4 to XLR Connection\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eProvides easy integration with Microflex microphones and standard mixers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eDurable Professional Build\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eEnsures reliable performance in installed audio environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eEasy Installation\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eConnects directly between microphone and mixer for quick setup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eClean Signal Transmission\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eMaintains high audio quality in RF-heavy environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSpecifications Table\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003ctable dir=\"auto\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth data-col-size=\"md\"\u003eSpecification\u003c\/th\u003e\n\u003cth data-col-size=\"lg\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eRFI-Resistant In-Line Preamplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eInput Connector\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eTA4 mini 4-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eOutput Connector\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003e3-pin XLR balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003ePower Requirements\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003e11–52 V DC phantom power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eCompatibility\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eMicroflex lavalier, boundary, gooseneck, and overhead microphones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eTypical Use\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eConferencing and installed sound systems with high RF activity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eFunction\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eBoosts RF immunity and provides balanced output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eCompare Chart\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003ctable dir=\"auto\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth data-col-size=\"md\"\u003eAspect\u003c\/th\u003e\n\u003cth data-col-size=\"md\"\u003eShure RK170\u003c\/th\u003e\n\u003cth data-col-size=\"md\"\u003eShure RK169\u003c\/th\u003e\n\u003cth data-col-size=\"md\"\u003eShure RK100PKW\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003ePrimary Function\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eRFI-resistant in-line preamp\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eRFI-resistant in-line preamp\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eIn-line preamp (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eRF Immunity\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eHigh (specific RFI resistance)\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eHigh (specific RFI resistance)\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eStandard boosted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eColor\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eBlack\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eBlack\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eInstallation Style\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eFlexible in-line\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eFlexible in-line\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eFlexible in-line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eTypical Applications\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eRF-heavy conferencing environments\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eRF-heavy conferencing environments\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eLight-colored installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eCompatibility\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eMicroflex series\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eMicroflex series\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eMicroflex series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eTA4 to XLR\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eTA4 to XLR\u003c\/td\u003e\n\u003ctd data-col-size=\"md\"\u003eTA4 to XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eWhat is the main purpose of the RK170? It reduces radio frequency interference while providing balanced output for Microflex microphones.\u003c\/li\u003e\n\u003cli\u003eWhich microphones is it compatible with? It works with Microflex lavalier, boundary, gooseneck, and overhead microphones using TA4 connections.\u003c\/li\u003e\n\u003cli\u003eDoes it require phantom power? Yes, the preamplifier operates on 11–52 V DC phantom power supplied by the connected mixer.\u003c\/li\u003e\n\u003cli\u003eHow is the preamplifier connected? It uses a TA4 mini 4-pin input from the microphone and provides a 3-pin XLR balanced output to the mixer.\u003c\/li\u003e\n\u003cli\u003eIs the RK170 suitable for environments with many wireless devices? Yes, it is specifically engineered for high RF immunity in such conditions.\u003c\/li\u003e\n\u003cli\u003eCan it be used for overhead microphones? Yes, it is commonly paired with MX202 overhead models for clean, interference-resistant signal transmission.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43349282029804,"sku":"RK170","price":78.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-rk170-rfi-resistant-replacement-gooseneck-for-mx202-discontinued-creation-networks-32910.jpg?v=1757901501"},{"product_id":"sennheiser-a-1031-u-passive-omni-directional-antenna-004645","title":"Sennheiser A 1031-U Passive omni-directional antenna - 004645","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Sennheiser A 1031-U is a passive omnidirectional antenna designed for use with Sennheiser UHF wireless systems. It provides reliable omnidirectional RF coverage without requiring external power, making it an economical and simple solution for fixed wireless antenna installations. Compatible with a wide range of Sennheiser wireless systems, it is available at Creation Networks for AV integrators and system installers.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe A 1031-U passive omni antenna offers broad omnidirectional coverage for Sennheiser UHF wireless receiver installations. As a passive device, it requires no external power supply, simplifying wiring and installation. The antenna connects via BNC connector and is compatible with a wide range of Sennheiser G3, G4, 2000, and 3000 Series receivers. Its omnidirectional radiation pattern provides equal coverage in all horizontal directions, making it suitable for installations where transmitter positions are not predictable or where full 360-degree coverage is needed. The A 1031-U can be mounted using a BNC cable run to the receiver or positioned at the front of a rack using optional front-mount hardware. For larger installations or longer cable runs, it can be used with Sennheiser inline antenna boosters to compensate for cable loss.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Omnidirectional Design\u003c\/strong\u003e — No external power required; provides 360-degree horizontal RF coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Connector\u003c\/strong\u003e — Standard BNC connection compatible with most Sennheiser UHF receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad System Compatibility\u003c\/strong\u003e — Works with Sennheiser G3, G4, 2000, and 3000 Series UHF receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple Installation\u003c\/strong\u003e — Straightforward mounting with no power wiring required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtendable with Inline Boosters\u003c\/strong\u003e — Pair with AB 4 series antenna boosters for longer cable runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCost-Effective RF Coverage\u003c\/strong\u003e — Budget-friendly omnidirectional antenna for standard installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePassive, omnidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eNot required (passive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eSennheiser UHF wireless systems (G3, G4, 2000, 3000 Series)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":43380854817004,"sku":"004645","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/sennheiser-a-1031-u-passive-omni-directional-antenna-004645-creation-networks-49627.png?v=1757902456"},{"product_id":"sennheiser-a-5000-cp-receiver-transmitter-antenna-passive-directional-circularly-polarized-usa5000cp","title":"Sennheiser A 5000-CP Receiver\/transmitter antenna, passive, directional, circularly polarized - USA5000CP","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Sennheiser A 5000-CP is a professional circularly polarized directional antenna designed for use with Sennheiser UHF wireless systems in demanding RF environments. Its unique circular polarization helps eliminate the multipath reflections and antenna orientation issues that plague linearly polarized systems, making it particularly effective in large venues, outdoor stages, and complex acoustic spaces. Available at Creation Networks for touring productions and permanent installations requiring the highest RF reliability.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe A 5000-CP is Sennheiser's premium directional antenna, employing circular polarization to deliver superior signal reception in challenging environments. Traditional linearly polarized antennas are susceptible to signal cancellation when the transmitter antenna is oriented perpendicular to the receiving antenna. Circular polarization eliminates this problem by accepting signals regardless of the transmitter's rotational orientation, dramatically reducing dropouts caused by transmitter movement or multipath reflections from walls and equipment. The directional pattern focuses coverage in one direction, providing higher effective gain and longer range than omnidirectional antennas when positioned toward the performance area. The A 5000-CP connects via BNC and is compatible with all Sennheiser UHF wireless systems in the 470–1075 MHz range including G3, G4, 2000, and 6000 Series receivers. It is typically used in conjunction with Sennheiser passive or active splitters for multi-receiver installations. The antenna can be combined with antenna boosters for long cable runs from the stage to the FOH rack.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircular Polarization\u003c\/strong\u003e — Eliminates polarization mismatch dropouts regardless of transmitter antenna orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Pattern\u003c\/strong\u003e — Focused coverage provides higher effective gain toward the performance area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultipath Rejection\u003c\/strong\u003e — Reduces signal cancellation caused by reflections in complex acoustic environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Frequency Range\u003c\/strong\u003e — Compatible across the 470–1075 MHz UHF range for use with multiple Sennheiser platforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Connector\u003c\/strong\u003e — Standard BNC connection for easy integration with Sennheiser receivers and splitters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e — Built for touring and permanent installation use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplitter and Booster Compatible\u003c\/strong\u003e — Integrates with Sennheiser ASP and AB series components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLarge concert stages and amphitheaters with multiple wireless channels\u003c\/li\u003e\n\u003cli\u003eOutdoor events with high multipath environments\u003c\/li\u003e\n\u003cli\u003eBroadcast trucks and mobile production facilities\u003c\/li\u003e\n\u003cli\u003eArenas and stadiums requiring maximum wireless range and reliability\u003c\/li\u003e\n\u003cli\u003ePermanent installations in complex RF environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eActive, directional, circularly polarized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency Range\u003c\/th\u003e\n\u003ctd\u003e470–1075 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eSennheiser G3, G4, 2000, 6000, 9000 Series UHF receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat makes circular polarization better than linear polarization?\u003c\/dt\u003e\n\u003cdd\u003eCircular polarization accepts signals from any rotational orientation of the transmitter antenna. Linear polarization can cause signal cancellation when the transmitter and receiver antennas are misaligned by 90 degrees.\u003c\/dd\u003e\n\u003cdt\u003eHow far can the A 5000-CP receive signals?\u003c\/dt\u003e\n\u003cdd\u003eRange depends on power output, frequency, and environment. In open conditions with appropriate line-of-sight, the A 5000-CP can dramatically extend usable range compared to a standard omni antenna.\u003c\/dd\u003e\n\u003cdt\u003eDoes the A 5000-CP work with G4 200 Series receivers?\u003c\/dt\u003e\n\u003cdd\u003eIt is compatible with all Sennheiser UHF wireless systems in the 470–1075 MHz range, including G4 100\/200\/300\/500 Series receivers.\u003c\/dd\u003e\n\u003cdt\u003eCan I use this with a splitter for multiple receivers?\u003c\/dt\u003e\n\u003cdd\u003eYes. The A 5000-CP connects to Sennheiser passive splitters (ASP series) or active combiners\/splitters for distributing the antenna signal to multiple receivers.\u003c\/dd\u003e\n\u003cdt\u003eWhat antenna booster works with the A 5000-CP?\u003c\/dt\u003e\n\u003cdd\u003eSennheiser AB 4 series and AB 3700 inline boosters are compatible for compensating cable loss over longer runs.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":43380854849772,"sku":"USA5000CP","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/sennheiser-a-5000-cp-receivertransmitter-antenna-passive-directional-circularly-polarized-usa5000cp-creation-networks-16206.png?v=1757902457"},{"product_id":"sennheiser-adp-uhf-470-1075-mhz-passive-directional-external-paddle-antenna-uhf-range-470-1075-mhz","title":"Sennheiser ADP UHF (470 - 1075 MHZ) Passive, directional external paddle antenna, UHF range (470 - 1075 MHz) - 508863","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Sennheiser ADP UHF is a passive directional external paddle antenna covering the 470–1075 MHz UHF range, providing wide-band directional RF reception for Sennheiser wireless systems across multiple frequency bands. Its flat paddle form factor offers improved gain compared to standard rod antennas. Available at Creation Networks for professional wireless installations.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe ADP UHF is a passive directional paddle antenna with an exceptionally wide frequency coverage spanning 470 to 1075 MHz, making it compatible with virtually all Sennheiser UHF wireless systems across the G3, G4, 2000, 3000, 6000, and EW-D platforms. The directional pattern focuses RF reception toward the performance area, providing higher effective gain in the desired direction compared to omnidirectional antennas while reducing reception of interference from other directions. The flat paddle form factor provides a wide beamwidth in the horizontal plane while maintaining directional rejection in the vertical plane. The ADP UHF connects via BNC connector and can be used with Sennheiser antenna boosters and passive splitters for distribution to multiple receivers. It is ideal for large venues where antennas must be positioned to cover a defined stage area from a distance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Band Coverage (470–1075 MHz)\u003c\/strong\u003e — Single antenna serves all Sennheiser UHF wireless bands simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Paddle Design\u003c\/strong\u003e — Focused RF reception toward the stage with improved gain over omnidirectional antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Design\u003c\/strong\u003e — No power required; simple installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Connector\u003c\/strong\u003e — Standard BNC for universal Sennheiser system compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Horizontal Beamwidth\u003c\/strong\u003e — Broad coverage across wide stage areas while remaining directional.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with G3, G4, 2000, 6000, EW-D Systems\u003c\/strong\u003e — Universal across all Sennheiser UHF platforms in this range.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePassive, directional paddle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency Range\u003c\/th\u003e\n\u003ctd\u003e470–1075 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eNot required (passive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":43380859076844,"sku":"508863","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/sennheiser-adp-uhf-470-1075-mhz-passive-directional-external-paddle-antenna-uhf-range-470-1075-mhz-508863-creation-networks-44965.png?v=1757902525"},{"product_id":"sennheiser-ad-3700-receiver-antenna-active-directional-bnc-3-8-assembly-screw-470-866-mhz-adjustable-amplification-5-10-15-db-for-em2000-2050-3731-3732-6000-receivers","title":"Sennheiser AD 3700 Receiver antenna, active, directional, For EM2000\/2050\/3731\/3732\/6000 receivers - 502197","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Sennheiser AD 3700 is a professional active directional receiving antenna for the 2000 Series and higher-tier Sennheiser wireless systems, covering the 470–866 MHz UHF range. It provides focused directional gain toward the performance area for maximum signal quality at long ranges. Available at Creation Networks.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe AD 3700 active directional receiving antenna delivers high-gain directional RF reception for Sennheiser 2000, 2050, 3731, 3732, and 6000 Series receivers covering the 470–866 MHz UHF range. Its active design includes a built-in LNA (low-noise amplifier) that compensates for cable loss while providing directional gain toward the performance area, enabling reliable wireless reception at ranges and distances beyond what passive antennas can achieve. The directional pattern focuses on the stage, reducing interference from other directions. The AD 3700 is typically deployed in large arenas, outdoor stages, and broadcast facilities where maximum wireless range and interference rejection are required. It works with the AB 3700 booster for extended cable runs and connects via BNC to compatible 2000 Series and higher receivers.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Directional Antenna\u003c\/strong\u003e — Built-in LNA provides gain while focusing on the performance area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Frequency Coverage (470–866 MHz)\u003c\/strong\u003e — Covers all Sennheiser 2000\/3000\/6000 Series frequency bands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-Range Reception\u003c\/strong\u003e — Extends reliable wireless range beyond passive antenna capabilities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs with AB 3700 Booster\u003c\/strong\u003e — Complete active remote antenna system for demanding large venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with 2000\/3000\/6000 Series\u003c\/strong\u003e — Designed for premium Sennheiser wireless platforms.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLarge arenas and outdoor concert stages requiring maximum wireless range\u003c\/li\u003e\n\u003cli\u003eBroadcast facilities with antennas positioned far from receiver racks\u003c\/li\u003e\n\u003cli\u003eConvention centers and hotels with distributed wireless coverage\u003c\/li\u003e\n\u003cli\u003eStadium and amphitheater permanent wireless installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eActive, directional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency Range\u003c\/th\u003e\n\u003ctd\u003e470–866 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Systems\u003c\/th\u003e\n\u003ctd\u003eSennheiser EM 2000\/2050\/3731\/3732\/6000 Series receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":43380863664364,"sku":"502197","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/sennheiser-ad-3700-receiver-antenna-active-directional-for-em20002050373137326000-receivers-502197-creation-networks-75361.png?v=1757902570"},{"product_id":"sennheiser-awm-2-mk-ii-antenna-wall-mount-metal-housing-white-including-2-1g9-antennas","title":"Sennheiser AWM 2 MK II Antenna wall mount, metal housing, white, including 2 1G9 antennas - 509297","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Sennheiser AWM 2 MK II is a wall mount for two SpeechLine 1G9 antennas, enabling discreet antenna placement on walls for SpeechLine DW and other compatible Sennheiser wireless systems. The metal housing in white blends with professional installation environments. Available at Creation Networks.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe AWM 2 MK II antenna wall mount provides a clean, professional installation solution for two Sennheiser 1G9 (DECT-band) antennas in SpeechLine Digital Wireless installations. The unit mounts to a wall surface, presenting the two included 1G9 antennas in an aesthetically neutral white housing that minimizes visual impact in boardrooms, conference rooms, and corporate environments. The wall mount enables antennas to be positioned at optimal heights and locations for reliable SpeechLine DW wireless coverage throughout the room. Connections are made via standard RF cable to the SpeechLine receiver. The AWM 2 MK II includes two 1G9 antennas ready for installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Antenna Wall Mount\u003c\/strong\u003e — Mounts two 1G9 antennas discreetly on a wall surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Two 1G9 Antennas\u003c\/strong\u003e — Ready-to-install with DECT-band antennas included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Metal Housing\u003c\/strong\u003e — Neutral finish for professional conference and corporate environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeechLine DW Compatible\u003c\/strong\u003e — Designed for Sennheiser SpeechLine Digital Wireless installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAntenna Capacity\u003c\/th\u003e\n\u003ctd\u003e2x 1G9 DECT-band antennas (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eWall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Systems\u003c\/th\u003e\n\u003ctd\u003eSennheiser SpeechLine Digital Wireless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":43380865335532,"sku":"509297","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/sennheiser-awm-2-mk-ii-antenna-wall-mount-metal-housing-white-including-2-1g9-antennas-509297-creation-networks-83439.jpg?v=1757902586"},{"product_id":"sennheiser-awm-4-antenna-wall-mount-metal-housing-white-including-4-rod-antennas","title":"Sennheiser AWM 4 Antenna wall mount, metal housing, white, including 4 rod antennas - 507358","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Sennheiser AWM 4 is a wall mount for four rod antennas, designed for larger SpeechLine Digital Wireless and compatible Sennheiser wireless system installations requiring broader antenna coverage. The white metal housing provides a professional appearance in installed environments. Available at Creation Networks.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe AWM 4 antenna wall mount accommodates four rod antennas on a single wall-mounted unit, suitable for SpeechLine Digital Wireless and compatible Sennheiser wireless system installations where greater antenna coverage or additional antenna capacity is needed. The white metal housing provides an unobtrusive appearance in boardrooms, conference centers, and corporate spaces. Four rod antennas are included. The mount provides a clean, structured way to position multiple antennas at the optimal height and location for reliable wireless coverage across larger rooms. RF connections route to compatible Sennheiser receivers.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Antenna Wall Mount\u003c\/strong\u003e — Accommodates four rod antennas for expanded wireless coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Four Rod Antennas\u003c\/strong\u003e — Ready for installation with antennas included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Metal Housing\u003c\/strong\u003e — Professional appearance in installed corporate environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeechLine DW Compatible\u003c\/strong\u003e — Designed for Sennheiser SpeechLine Digital Wireless systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAntenna Capacity\u003c\/th\u003e\n\u003ctd\u003e4x rod antennas (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eWall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Systems\u003c\/th\u003e\n\u003ctd\u003eSennheiser SpeechLine Digital Wireless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":43380865368300,"sku":"507358","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/sennheiser-awm-4-antenna-wall-mount-metal-housing-white-including-4-rod-antennas-507358-creation-networks-44800.jpg?v=1757902587"},{"product_id":"sennheiser-542181-spare-part-sk-5212-sk-5212-ii-ek3241-whip-antenna-with-bnc-connector-specify-frequency-range-for-proper-sizing","title":"Sennheiser 542181 200mm Antenna  with Cap (450 to 960 MHz)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eSennheiser part 542181 is a 200mm UHF antenna with cap for the 450–960 MHz frequency range, compatible with Sennheiser wireless receivers in this band. Available at Creation Networks as a replacement antenna.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eReplacement 200mm UHF antenna with protective cap covering the 450–960 MHz frequency range. Compatible with Sennheiser wireless receiver systems operating in this broad UHF band. Part number 542181. The 200mm length and cap-protected design make this antenna suitable for use across multiple Sennheiser wireless platforms. Serves as a replacement for damaged antennas on compatible receivers.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200mm UHF Antenna\u003c\/strong\u003e — Replacement antenna for 450–960 MHz band receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith Protective Cap\u003c\/strong\u003e — Cap included for protection when not in use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Frequency Coverage\u003c\/strong\u003e — Covers 450–960 MHz UHF range.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency Range\u003c\/th\u003e\n\u003ctd\u003e450–960 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":43380873036012,"sku":"542181","price":43.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/sennheiser-542181-200mm-antenna-with-cap-450-to-960-mhz-creation-networks-54452.png?v=1757902653"},{"product_id":"sennheiser-a-9000-a1-a8-receiving-antenna-active-omnidirectional-n-connector-3-8-mounting-thread-470-638-mhz","title":"Sennheiser A 9000 A1-A8 Receiving antenna, active, omnidirectional, N-connector, 3\/8\" mounting thread 470-638 MHz - 504705","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Sennheiser A 9000 A1-A8 is an active omnidirectional receiving antenna purpose-built for Digital 9000 wireless systems operating in the 470–638 MHz (A1-A8) UHF range. It integrates the AB 9000 active booster directly on the antenna body, delivering compensated RF signal to the receiver across long cable runs. The standard N-type RF connector and 3\/8\" mounting thread allow straightforward installation on microphone stands, truss, or antenna distribution systems.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eProfessional Digital 9000 deployments demand reliable RF distribution across large venues and long cable runs — the A 9000 addresses both challenges in a single compact unit. The integrated AB 9000 booster contains eight highly selective bandpass filters, each passing a discrete 24 MHz window aligned to one of the A1–A8 frequency ranges. This pre-filtering occurs immediately before the first active stage, blocking interference and intermodulation products before they can degrade the signal. The linear RF amplifier compensates for up to 14 dB of coaxial cable loss, allowing the antenna to be positioned remotely from the rack without signal degradation. The receiver and booster work together to measure actual cable loss and automatically adjust gain — eliminating manual level setting. As an omnidirectional (log-periodic hybrid) design, the A 9000 provides wider horizontal coverage than directional antennas, making it well suited to stages and audience areas where transmitter position is unpredictable. The active frequency window is remotely selectable from the Digital 9000 receiver, so no physical adjustment is required when changing frequency bands. The N-type RF connector is a professional-grade interface rated for low insertion loss, and the standard 3\/8\" thread provides a universal mount for existing stands and hardware. At $1,499, the A 9000 is the correct choice for engineers building permanent or touring Digital 9000 infrastructure where RF reliability is non-negotiable.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Omnidirectional Design\u003c\/strong\u003e — Integrates the AB 9000 booster on the antenna for wide-area coverage with active gain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Selective Bandpass Filters\u003c\/strong\u003e — Each filter passes a 24 MHz window, blocking out-of-band interference directly before the first active component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 14 dB Cable Loss Compensation\u003c\/strong\u003e — Linear RF amplifier maintains signal integrity over long coaxial cable runs between antenna and rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Gain Adjustment\u003c\/strong\u003e — Receiver and booster jointly measure cable loss and set gain automatically, eliminating manual calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Frequency Window Selection\u003c\/strong\u003e — Active band is selected from the Digital 9000 receiver; no physical adjustment at the antenna required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e470–638 MHz Coverage (A1-A8)\u003c\/strong\u003e — Eight discrete 24 MHz sub-bands span the full A1-A8 UHF allocation for multi-frequency deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eN-Type RF Connector\u003c\/strong\u003e — Professional-grade interface with low insertion loss and high durability for touring and installed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/8\" Mounting Thread\u003c\/strong\u003e — Universal thread compatible with standard microphone stands, boom arms, and truss mounting hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital 9000 System Integration\u003c\/strong\u003e — Designed exclusively for the Digital 9000 ecosystem, ensuring full compatibility with SKM 9000, SKM 9000 BK, and SK 9000 transmitters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor\u003c\/strong\u003e — Antenna and booster in a single housing reduce cable clutter and simplify deployment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge-scale live touring productions using multi-channel Digital 9000 systems\u003c\/li\u003e\n\u003cli\u003ePermanent installed sound in arenas, stadiums, and convention centers\u003c\/li\u003e\n\u003cli\u003eBroadcast studios and outside broadcast trucks requiring robust UHF antenna infrastructure\u003c\/li\u003e\n\u003cli\u003eHouses of worship with distributed antenna systems and long cable runs from RF equipment to antenna positions\u003c\/li\u003e\n\u003cli\u003eTheater productions with complex RF coordination across wide stage areas\u003c\/li\u003e\n\u003cli\u003eCorporate conference centers with high RF channel counts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Category\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWireless System Antenna \/ Accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDigital 9000 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–638 MHz (A1-A8)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSub-Band Count\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 (A1–A8, each 24 MHz wide)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eActive omnidirectional (log-periodic hybrid)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntegrated Booster\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAB 9000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Cable Loss Compensation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 14 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRF Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN-type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Thread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGain Control\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAutomatic (receiver-controlled)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e504705\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrice\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e$1,499.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eQ: What wireless systems is the A 9000 A1-A8 compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe A 9000 is designed exclusively for Sennheiser's Digital 9000 series, including the SKM 9000, SKM 9000 BK, and SK 9000 bodypack transmitters paired with the EM 9046 and EM 9046 DX receivers.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eQ: What does the A1-A8 designation mean?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eA1 through A8 refer to eight discrete 24 MHz sub-bands spanning the 470–638 MHz UHF range. The active bandpass filter in the antenna passes only the selected sub-band window, rejecting signals outside it.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eQ: How is the active frequency window selected?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe frequency window is remotely selected from the Digital 9000 receiver over the RF cable — no manual adjustment at the antenna is needed. This is particularly useful when the antenna is mounted in a difficult-to-reach position.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eQ: How does the automatic gain control work?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe AB 9000 booster and the Digital 9000 receiver jointly measure the insertion loss of the coaxial cable between them and automatically set the amplifier gain to compensate, up to a maximum of 14 dB.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eQ: Can I use the A 9000 with antenna combiners or splitters?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The N-type connector is standard for professional RF distribution components. It is compatible with Sennheiser's ASA 3715 and similar antenna splitter\/combiner units used in multi-channel Digital 9000 installations.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eQ: What is the difference between the A 9000 and the AD 9000?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe A 9000 is omnidirectional, providing 360-degree horizontal coverage, which suits stages where transmitters can be anywhere in front of, beside, or behind the antenna. The AD 9000 is directional (log-periodic), offering higher front gain but narrower coverage — typically used for longer-throw front-of-house applications.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eQ: Does the A 9000 require external power?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe AB 9000 booster inside the A 9000 is powered via the coaxial cable from the Digital 9000 receiver — no separate power supply or power injector is required.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eQ: What mounting hardware is compatible?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe standard 3\/8\" mounting thread accepts common microphone stand adaptors, boom arm clips, and truss mounting brackets. Most American and European mic stand hardware uses a 5\/8\"-27 thread, so a standard 3\/8\"-to-5\/8\" adaptor will be required for typical stand mounting.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":43380888862956,"sku":"504705","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/sennheiser-a-9000-a1-a8-receiving-antenna-active-omnidirectional-n-connector-38-mounting-thread-470-638-mhz-504705-creation-networks-23577.png?v=1757902828"},{"product_id":"sennheiser-ad-9000-a1-a8-receiving-antenna-active-directional-n-connection-3-8-mounting-thread-470-638-mhz","title":"Sennheiser AD 9000 A1-A8 Receiving antenna, active, directional, N connection, 3\/8\" mounting thread 470-638 MHz - 504711","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Sennheiser AD 9000 A1–A8 is an active directional receiving antenna for the Digital 9000 Series wireless system, covering the 470–638 MHz frequency range (bands A1 through A8). It integrates the AB 9000 active booster directly on the antenna body, providing a built-in linear RF amplifier that compensates for cable loss of up to 14 dB on the coaxial run between the antenna and receiver. The antenna connects to the receiver via N-type connector and mounts via a standard 3\/8” thread for use on microphone stands or custom mounting hardware. It is intended for permanent and touring installations where the antenna must be positioned at a distance from the rack-mounted receiver.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eIn professional wireless deployments, antenna placement is often the most critical factor in system reliability. The AD 9000 addresses the technical constraints of long antenna cable runs by incorporating the AB 9000 booster directly into the antenna housing. This active gain stage compensates for up to 14 dB of coaxial cable loss, meaning the antenna can be placed 20 to 30 meters or more from the receiver rack without the RF signal degradation that would otherwise reduce system range and reliability.\u003c\/p\u003e\n\u003cp\u003eThe antenna’s directional log-periodic design provides focused gain toward the stage or performance area, which has two practical benefits. First, it increases the effective received signal strength from the desired transmitter direction. Second, the directional pattern reduces pickup of RF interference sources located outside the antenna’s main lobe, improving signal-to-noise ratio in the RF domain before the signal reaches the receiver.\u003c\/p\u003e\n\u003cp\u003eEight highly selective bandpass filters inside the AB 9000 booster each pass a 24 MHz frequency window within the A1–A8 range. The active filter appropriate for the operating frequency can be remotely selected from the Digital 9000 receiver, blocking out-of-band signals before they reach the first active amplifier stage. This pre-selection architecture significantly reduces the risk of the amplifier being overloaded by strong adjacent RF signals, which is a common failure mode for broadband active antennas operating in congested urban or broadcast RF environments.\u003c\/p\u003e\n\u003cp\u003eThe AD 9000 uses an N-type connector for the RF output to the receiver, providing a robust, low-loss coaxial interface appropriate for the long cable runs typical in installed-sound applications. The 3\/8” mounting thread is the standard microphone stand thread, compatible with boom arms, antenna masts, and custom brackets used in theatrical rigging and production. A single AD 9000 connects to one of the two antenna inputs on the EM 9046 or other Digital 9000 receivers; two units are typically used per receiver channel pair for full diversity coverage.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated AB 9000 Active Booster\u003c\/strong\u003e — Built-in RF amplifier compensates for up to 14 dB of cable loss, enabling long coaxial runs between the antenna and rack-mounted receiver without signal degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Selectable 24 MHz Bandpass Filters\u003c\/strong\u003e — Highly selective pre-amplifier filters block out-of-band interference before the active stage; filter selection is remotely controlled from the Digital 9000 receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Log-Periodic Design\u003c\/strong\u003e — Focused gain pattern increases received signal strength from the stage area while reducing pickup of interference sources outside the main lobe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Cable Loss Compensation\u003c\/strong\u003e — Booster and receiver communicate to measure cable loss on the RF coaxial run and adjust gain automatically for consistent signal levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e470–638 MHz Coverage (A1–A8)\u003c\/strong\u003e — Covers the full A1 through A8 band range used by Digital 9000 system variants operating in this portion of the UHF spectrum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eN-Type RF Connector\u003c\/strong\u003e — Industry-standard N connector provides a low-loss, mechanically secure coaxial interface for long cable runs to the receiver rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/8” Mounting Thread\u003c\/strong\u003e — Standard microphone stand thread enables mounting on boom stands, antenna masts, theatrical rigging brackets, and custom hardware without special adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Filter Selection\u003c\/strong\u003e — Frequency window selection is managed from the Digital 9000 receiver, eliminating the need to physically access the antenna during frequency coordination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital 9000 Series Ecosystem Integration\u003c\/strong\u003e — Designed and calibrated for use with the EM 9046 and other Digital 9000 receivers; not intended for use with other Sennheiser wireless series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU 504711\u003c\/strong\u003e — Single-unit product; two units per diversity receiver are recommended for full spatial diversity coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge-format theater and Broadway productions using Digital 9000 systems where antennas must be flown or positioned away from the sound rack\u003c\/li\u003e\n\u003cli\u003eBroadcast studios and news sets with antenna distribution infrastructure requiring long coaxial runs\u003c\/li\u003e\n\u003cli\u003eConcert touring with Digital 9000 wireless systems requiring front-of-house or stage-lip antenna placement\u003c\/li\u003e\n\u003cli\u003eHouses of worship with distributed antenna systems and antenna-to-rack cable runs exceeding 10 meters\u003c\/li\u003e\n\u003cli\u003eSports and outdoor broadcast where antennas are mounted at distance from the production vehicle or rack room\u003c\/li\u003e\n\u003cli\u003eInstalled-sound venues with permanent wireless infrastructure and conduit-routed antenna cabling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSennheiser Digital 9000 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470–638 MHz (A1–A8)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eActive directional (log-periodic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntegrated Booster\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAB 9000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Cable Loss Compensation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBandpass Filters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 filters, each 24 MHz window; remotely selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRF Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN-type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Thread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/8” (standard microphone stand thread)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilter Selection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRemote, via Digital 9000 receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Loss Adjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAutomatic (receiver-antenna communication)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e504711\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eQ: What makes the AD 9000 an “active” antenna?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe AD 9000 incorporates the AB 9000 booster — an RF amplifier with selective bandpass filtering — directly in the antenna housing. This active gain stage requires a DC power supply, which is delivered from the Digital 9000 receiver via the RF coaxial cable (phantom power over coax). The amplifier compensates for cable loss on the run from the antenna to the receiver, maintaining signal quality over long distances.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eQ: How long a cable run can the AD 9000 support?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe AB 9000 booster compensates for up to 14 dB of cable loss. With standard 50-ohm RG-8 or equivalent low-loss coaxial cable, this typically allows runs of 20–30 meters or more depending on cable type and frequency. Higher-loss cable types reduce the maximum practical run length. The system automatically measures and compensates for the actual cable loss in use.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eQ: What is the function of the eight bandpass filters?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe eight filters each pass a 24 MHz slice of the 470–638 MHz band. Before the amplifier stage, the filter tuned to your operating frequency is activated, blocking signals outside that 24 MHz window. This prevents strong out-of-band RF signals — such as TV broadcast transmitters or other wireless systems — from saturating the amplifier and causing intermodulation or desensitization. Filter selection is controlled remotely from the receiver.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eQ: Is the AD 9000 compatible with Digital 6000 or Evolution wireless systems?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. The AD 9000 is designed specifically for the Sennheiser Digital 9000 Series and requires the Digital 9000 receiver to supply power over coax and to control filter selection remotely. It is not electrically or mechanically compatible with Digital 6000, EW, or SL wireless systems. For those systems, use the appropriate Sennheiser antenna products.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eQ: How many AD 9000 antennas do I need per receiver?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eDigital 9000 receivers such as the EM 9046 support two antenna inputs for true diversity reception. For full diversity coverage, two AD 9000 units are recommended per receiver, positioned to provide spatial diversity (typically separated by at least one meter) aimed at the stage area.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eQ: What connector type does the AD 9000 use and why?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe AD 9000 uses an N-type connector, which provides lower insertion loss and better mechanical retention than BNC connectors at UHF frequencies. N connectors are standard in professional RF infrastructure for runs over 10 meters and are preferred in permanent installation environments where connection integrity over time is important.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eQ: Can the AD 9000 be mounted on a standard microphone stand?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The 3\/8” mounting thread on the AD 9000 is the same as a standard microphone stand thread, so it mounts directly on a boom stand or straight stand without an adapter. For theatrical and touring applications, it can also be attached to custom rigging hardware, antenna masts, or truss-mounted brackets using the same thread.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":43380888928492,"sku":"504711","price":1699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/sennheiser-ad-9000-a1-a8-receiving-antenna-active-directional-n-connection-38-mounting-thread-470-638-mhz-504711-creation-networks-64957.png?v=1757902830"},{"product_id":"shure-ua221-passive-antenna-splitter-combiner-for-shure-wireless-receivers-ua221","title":"Shure UA221 Passive Antenna Splitter \/ Combiner for Shure Wireless Receivers - UA221","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure UA221 Passive Antenna Splitter\/Combiner Kit allows multiple Shure wireless receivers to share a single pair of remote antennas, or combines two antenna inputs into a single output. Because it is passive—requiring no power source—the UA221 adds no noise or power complexity to the antenna distribution system. Each kit includes two UA221 splitter\/combiner adapters, four BNC-BNC coaxial cables, and attaching hardware, providing everything needed for a basic 1-to-2 or 2-to-1 antenna sharing configuration in a commercial wireless system installation.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eIn commercial AV installations where multiple Shure wireless receivers are located in the same rack or equipment room, routing separate antennas for each receiver is often impractical due to cable management constraints, plenum-rated cable requirements, or conduit limitations. The UA221 kit enables a single pair of remotely positioned antennas to serve two wireless receivers simultaneously—reducing the total antenna cable count by half. When used in combining mode, two antenna outputs can be fed into a single input, which is useful for specific system topologies where antenna consolidation is required. The passive design ensures that no active power source is needed in the antenna path, simplifying installation in plenum spaces, conduit, or remote antenna positions where powering active components is not practical. All cables and adapters included in the kit use standard BNC connectors compatible with Shure antenna accessories and receivers.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua221-passive-antenna-splitter-combiner-for-shure-wireless-receivers-ua221-creation-networks-82487.jpg\" alt=\"Shure UA221 Passive Antenna Splitter Combiner Kit\" style=\"max-width:100%;height:auto;margin-top:12px;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Antenna Splitting and Combining\u003c\/strong\u003e — Allows a single pair of remote antennas to serve two Shure wireless receivers, or combines two antenna signals into one, without requiring a power source in the antenna path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes Two Adapters and Four Cables\u003c\/strong\u003e — Provides both splitter\/combiner adapters and the coaxial cables required for a complete basic antenna sharing installation, reducing additional procurement steps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Connectors\u003c\/strong\u003e — Standard BNC connections are compatible with Shure wireless receivers and antenna accessories, integrating into existing Shure antenna infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces Antenna Cable Runs\u003c\/strong\u003e — Enables two receivers to share one remote antenna pair, cutting required antenna cable runs in half and simplifying cable management in racks and conduit systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Power Required\u003c\/strong\u003e — Fully passive design requires no DC power in the antenna path, simplifying installation in plenum spaces, conduit, and remote mounting locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px;border:1px solid #ddd;background:#f5f5f5;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px;border:1px solid #ddd;background:#f5f5f5;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eType\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePassive antenna splitter\/combiner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eConfiguration\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e1-in\/2-out (splitter) or 2-in\/1-out (combiner)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eKit Contents\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e2× UA221 adapters, 4× BNC-BNC coaxial cables, attaching hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePower Required\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eNone (passive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43640853070060,"sku":"UA221","price":197.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua221-passive-antenna-splitter-combiner-for-shure-wireless-receivers-ua221-creation-networks-82487.jpg?v=1757909437"},{"product_id":"shure-ua400-1-4-wave-antenna-for-use-with-u4s-u4d-and-uc4-receivers-774-862-mhz-covers-ua-frequency-range-ua400","title":"Shure UA400 1\/4 Wave UHF Antenna for Wireless Receivers (774-862 MHz)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure UA400 is a 1\/4 wave omnidirectional UHF replacement antenna covering 774 to 862 MHz, designed for use with Shure U4S, U4D, and UC4 wireless receivers operating in the UA frequency range. It attaches directly to the BNC antenna port on compatible receivers and provides a straightforward omnidirectional pickup pattern suited to installations where transmitters move through the pickup zone rather than staying in a fixed position relative to the antenna.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe UA400 is a single replacement 1\/4 wave UHF antenna for Shure wireless receivers operating in the 774 to 862 MHz frequency range. It is used in commercial AV and installed sound applications as a direct replacement for a damaged or missing factory antenna, or as part of an antenna distribution configuration when multiple antennas are required at different positions in the same system. The BNC connector mates directly with standard Shure receiver antenna ports. For installations where the receiver is rack-mounted and the antenna needs to be positioned remotely—such as on a wall, ceiling tile edge, or equipment stand—the UA400 can be used with the Shure UA505 mounting bracket (sold separately) for remote positioning away from the rack.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua400-14-wave-antenna-for-use-with-u4s-u4d-and-uc4-receivers-774-862-mhz-covers-ua-frequency-range-ua400-creation-networks-73398.jpg\" alt=\"Shure UA400 1\/4 Wave UHF Antenna 774-862 MHz\" style=\"max-width:100%;height:auto;margin-top:12px;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4 Wave Omnidirectional Pattern\u003c\/strong\u003e — Provides 360-degree coverage around the antenna axis, suitable for environments where wireless transmitter users move throughout the room rather than staying in a fixed position relative to the receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e774–862 MHz Frequency Coverage\u003c\/strong\u003e — Covers the UA frequency range used by Shure U4S, U4D, and UC4 wireless receivers; verify receiver band compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Connector\u003c\/strong\u003e — Standard BNC connection mates directly with Shure wireless receiver antenna ports and is compatible with BNC-terminated coaxial extension cables for remote antenna placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Replacement Part\u003c\/strong\u003e — Serves as a replacement antenna for compatible receivers where the factory antenna has been damaged, lost, or requires relocation for improved RF coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px;border:1px solid #ddd;background:#f5f5f5;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px;border:1px solid #ddd;background:#f5f5f5;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eAntenna Type\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e1\/4 wave omnidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eFrequency Range\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e774–862 MHz (UA frequency range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eConnector\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCompatible Receivers\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eShure U4S, U4D, UC4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43640864145644,"sku":"UA400","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua400-14-wave-antenna-for-use-with-u4s-u4d-and-uc4-receivers-774-862-mhz-covers-ua-frequency-range-ua400-creation-networks-73398.jpg?v=1757909437"},{"product_id":"shure-a400b-1-4-wave-antenna-for-use-with-slx4-u4s-u4d-and-uc4-receivers-470-to-752-mhz-ua400b","title":"Shure UA400B 1\/4 Wave UHF Antenna for Wireless Receivers (470-752 MHz)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure UA400B is a 1\/4 wave omnidirectional UHF replacement antenna covering 470 to 752 MHz, designed for use with Shure SLX4, SLX4L, U4S, U4D, and UC4 wireless receivers. It connects directly to the BNC antenna port on compatible receivers and provides standard omnidirectional RF coverage for commercial wireless installations where a direct-mount or remote-mount antenna is required in the 470–752 MHz frequency range.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe UA400B covers the lower UHF band (470–752 MHz) used by Shure SLX and select ULX-series wireless receivers, distinguishing it from the UA400 which covers the higher 774–862 MHz range. AV integrators specifying or maintaining wireless systems in the lower UHF band should confirm receiver frequency range before ordering to ensure the correct antenna model is selected. The UA400B’s BNC connector mates directly with receiver antenna ports and is compatible with standard BNC coaxial extension cables for remote antenna placement when the receiver is rack-mounted and line-of-sight positioning requires the antenna to be repositioned on a wall, ceiling, or equipment stand. It can be paired with the Shure UA505 remote antenna bracket (sold separately) for clean off-rack mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua400b-14-wave-antenna-for-use-with-slx4-u4s-u4d-and-uc4-receivers-470-to-752-mhz-ua400b-creation-networks-12420.jpg\" alt=\"Shure UA400B 1\/4 Wave UHF Antenna 470-752 MHz\" style=\"max-width:100%;height:auto;margin-top:12px;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4 Wave Omnidirectional Pattern\u003c\/strong\u003e — Provides 360-degree RF coverage around the antenna axis, appropriate for commercial environments where wireless transmitter users move throughout the room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e470–752 MHz Frequency Coverage\u003c\/strong\u003e — Covers the lower UHF band used by Shure SLX4, SLX4L, U4S, U4D, and UC4 receivers; select the UA400 for the 774–862 MHz range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Connector\u003c\/strong\u003e — Direct BNC connection compatible with Shure wireless receiver antenna ports and standard BNC coaxial extension cables for remote antenna placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Replacement Part\u003c\/strong\u003e — Replacement antenna for compatible receivers where the original antenna requires replacement or relocation for improved RF coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px;border:1px solid #ddd;background:#f5f5f5;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px;border:1px solid #ddd;background:#f5f5f5;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eAntenna Type\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e1\/4 wave omnidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eFrequency Range\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e470–752 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eConnector\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCompatible Receivers\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eShure SLX4, SLX4L, U4S, U4D, UC4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43640867913964,"sku":"UA400B","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua400b-14-wave-antenna-for-use-with-slx4-u4s-u4d-and-uc4-receivers-470-to-752-mhz-ua400b-creation-networks-12420.jpg?v=1757909439"},{"product_id":"shure-ua700-replacement-omnidirectional-whip-antenna-470-530mhz-ua700","title":"Shure UA700 – Replacement Omnidirectional Whip Antenna 470–530 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA700 is a replacement omnidirectional whip antenna for the Shure UR1 UHF body-pack transmitter, covering the 470–530 MHz frequency range. It is a direct drop-in replacement for worn or damaged transmitter antennas in commercial wireless systems, ensuring continued RF performance without requiring transmitter replacement. Keeping spare UA700 antennas on hand is standard practice for commercial AV installations and touring systems operating in this frequency band.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eBody-pack transmitter antennas are subject to mechanical wear from repeated use, particularly in high-usage commercial AV environments such as training rooms, houses of worship, and live event productions. The UA700 provides an exact-match replacement that restores the transmitter’s designed RF performance in the 470–530 MHz band. Installation requires no tools and can be completed by technical staff in seconds, minimizing system downtime during an event or session. The antenna’s color-coded cap makes it easy to identify the correct frequency range in a multi-band wireless inventory. For installations using the ULX-D bodypack transmitter, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ulxd1-digital-wireless-bodypack-transmitter-with-lemo3\"\u003eShure ULXD1 Digital Wireless Bodypack Transmitter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Replacement for UR1 Body-Pack Antenna\u003c\/strong\u003e — Provides an exact-fit replacement for the Shure UR1 UHF body-pack transmitter antenna in the 470–530 MHz band, restoring designed RF performance without transmitter replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e470–530 MHz Frequency Coverage\u003c\/strong\u003e — Precisely tuned for the 470–530 MHz UHF band, ensuring compatibility with Shure wireless systems operating in this frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor-Coded Cap for Easy Identification\u003c\/strong\u003e — The color-coded antenna cap allows technicians to quickly identify the correct frequency band antenna in multi-band wireless inventories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-Free Replacement\u003c\/strong\u003e — Antenna replacement requires no tools, enabling rapid swap-out to minimize system downtime in commercial AV environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eUA700\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e470–530 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eCompatible Transmitter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eShure UR1 UHF body-pack transmitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003ePattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eOmnidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eWhip (1\/4-wave)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43658767794412,"sku":"UA700","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua700-replacement-omnidirectional-whip-antenna-470-530mhz-ua700-creation-networks-97650.jpg?v=1757909631"},{"product_id":"shure-ua700-v-vhf-bodypack-antenna-ua700-v","title":"Shure UA700-V – VHF Replacement Bodypack Transmitter Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA700-V is a 1\/4-wave replacement omnidirectional whip antenna for Shure VHF body-pack transmitters, including the ULXD1 and QLXD1. It is specifically designed as a field-replaceable antenna for commercial wireless systems operating in the VHF frequency band, allowing technical staff to restore transmitter RF performance quickly when an antenna is damaged or worn. Maintaining UA700-V spares in the AV system kit is standard practice for commercial wireless deployments in high-usage environments.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eVHF body-pack transmitter antennas used in commercial AV and live production environments are subject to wear from frequent bending, cable routing, and physical use. The UA700-V is an exact-replacement whip antenna that matches the RF tuning of the original transmitter antenna for Shure VHF systems. Compatible with the ULXD1 and QLXD1 bodypack transmitters, this antenna enables AV technicians to perform in-field antenna replacements without returning the transmitter for service. The tool-free replacement process minimizes system downtime in active commercial environments such as houses of worship, conference centers, and training facilities. For additional Shure wireless accessories, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ulxd1-digital-wireless-bodypack-transmitter-with-lemo3\"\u003eShure ULXD1 Digital Wireless Bodypack Transmitter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4-Wave Replacement Antenna for VHF Body-Packs\u003c\/strong\u003e — Provides a direct replacement for body-pack transmitter antennas on Shure ULXD1 and QLXD1 VHF systems, restoring designed RF performance without full transmitter replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with ULXD1 and QLXD1\u003c\/strong\u003e — Engineered for use with Shure ULX-D and QLX-D bodypack transmitters operating in the VHF frequency band, ensuring system-level compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-Free Field Replacement\u003c\/strong\u003e — Antenna swap requires no specialized tools, allowing AV technicians to restore transmitter function quickly in commercial production environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOmnidirectional Pattern\u003c\/strong\u003e — Provides 360° RF coverage in the VHF band, maintaining the transmitter’s intended wireless system performance across the coverage area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eUA700-V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Band\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eVHF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eCompatible Transmitters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eShure ULXD1, QLXD1 bodypack transmitters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003ePattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eOmnidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e1\/4-wave whip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43658769629420,"sku":"UA700-V","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua700-v-vhf-bodypack-antenna-ua700-v-creation-networks-55129.jpg?v=1757909634"},{"product_id":"shure-ua710-replacement-omnidirectional-whip-antenna-518-578mhz-ua710","title":"Shure UA710 – Replacement Omnidirectional Whip Antenna 518–578 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA710 is a replacement omnidirectional whip antenna for the Shure UR1 UHF body-pack transmitter, covering the 518–578 MHz frequency range. It serves as a direct-fit replacement for the original transmitter antenna in commercial wireless systems operating in this UHF band, restoring RF performance when the antenna is worn or damaged. The UA710 is distinguished by its color-coded cap for easy frequency band identification in multi-band wireless inventories.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eIn commercial AV deployments where UHF wireless systems are used daily — such as corporate conference centers, training facilities, and houses of worship — body-pack transmitter antennas require periodic replacement due to physical wear. The UA710 provides an exact-fit replacement for the UR1 transmitter antenna in the 518–578 MHz band, enabling AV technicians to restore system performance without returning the transmitter for service. Tool-free replacement minimizes downtime in active environments. Maintaining spare UA710 antennas in the system spares kit is recommended for commercial wireless system management. For higher-frequency band requirements, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua720-replacement-omnidirectional-whip-antenna-578-698mhz-ua720\"\u003eShure UA720 Replacement Whip Antenna (578–698 MHz)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect UR1 Transmitter Antenna Replacement\u003c\/strong\u003e — Provides an exact-fit replacement for the Shure UR1 UHF body-pack transmitter antenna in the 518–578 MHz band, restoring designed RF performance without transmitter service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e518–578 MHz Frequency Coverage\u003c\/strong\u003e — Precisely tuned for UHF systems operating in the 518–578 MHz band, ensuring compatibility with Shure wireless system frequency assignments in this range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor-Coded Cap for Identification\u003c\/strong\u003e — The gray color-coded antenna cap allows technicians to quickly distinguish the UA710 from other frequency band antennas in multi-band wireless inventories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-Free Field Replacement\u003c\/strong\u003e — No tools required for antenna replacement, enabling rapid in-field swap-out to minimize commercial AV system downtime.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eUA710\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e518–578 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eCompatible Transmitter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eShure UR1 UHF body-pack transmitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003ePattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eOmnidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eWhip (1\/4-wave)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eCap Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eGray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43658771038444,"sku":"UA710","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua710-replacement-omnidirectional-whip-antenna-518-578mhz-ua710-creation-networks-27240.jpg?v=1757909633"},{"product_id":"shure-ua720-replacement-omnidirectional-whip-antenna-578-698mhz-ua720","title":"Shure UA720 – Replacement Omnidirectional Whip Antenna 578–698 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA720 is a replacement omnidirectional whip antenna for the Shure UR1 UHF body-pack transmitter, covering the 578–698 MHz frequency range. It provides a direct-fit replacement for worn or damaged transmitter antennas in commercial wireless systems operating in this UHF band. The color-coded cap simplifies identification in multi-band wireless inventories, and tool-free installation minimizes downtime during active commercial AV deployments.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe 578–698 MHz frequency range is widely used in commercial UHF wireless system deployments, including conference rooms, houses of worship, and broadcast environments. The UA720 maintains the RF performance of the UR1 body-pack transmitter by providing an exact-match replacement antenna tuned to this band. AV technicians can complete the swap in seconds without tools, making the UA720 an essential spare component for any wireless system maintenance kit. For adjacent frequency band requirements, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua710-replacement-omnidirectional-whip-antenna-518-578mhz-ua710\"\u003eShure UA710 Replacement Whip Antenna (518–578 MHz)\u003c\/a\u003e. Proper antenna maintenance is a key factor in sustaining reliable UHF wireless audio performance across multi-channel commercial installations.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect UR1 Transmitter Antenna Replacement\u003c\/strong\u003e — Provides an exact-fit replacement for the Shure UR1 UHF body-pack transmitter antenna tuned to the 578–698 MHz band, maintaining designed RF performance without transmitter service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e578–698 MHz Frequency Coverage\u003c\/strong\u003e — Precisely tuned for UHF wireless systems operating in the 578–698 MHz band, a commonly used range in commercial AV and broadcast wireless deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor-Coded Cap for Identification\u003c\/strong\u003e — The color-coded antenna cap allows technicians to quickly identify the correct antenna for the frequency band in multi-channel wireless system inventories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-Free Field Replacement\u003c\/strong\u003e — No special tools required for antenna swap, enabling rapid in-field replacement to minimize system downtime in commercial AV environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eUA720\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e578–698 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eCompatible Transmitter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eShure UR1 UHF body-pack transmitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003ePattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eOmnidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eWhip (1\/4-wave)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43658774020332,"sku":"UA720","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua720-replacement-omnidirectional-whip-antenna-578-698mhz-ua720-creation-networks-28485.jpg?v=1757909634"},{"product_id":"shure-ua845uwb-ultra-wide-band-antenna-and-power-distribution-system-174-to-1805-mhz","title":"Shure UA845UWB – Ultra-Wideband 5-Way Active Antenna Distribution System","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA845UWB is a five-way active antenna distribution system covering VHF, UHF, 1.2, 1.5, and 1.8 GHz — a frequency range of 174 to 1805 MHz — making it compatible with the full current portfolio of Shure wireless systems including Axient Digital, UHF-R, ULX-D, QLX-D, SLX, and BLX4R. It allows up to four wireless receivers to share a single pair of antennas while amplifying the RF signal to compensate for insertion loss, and its CASCADE ports enable expansion to a fifth receiver or a second UA845UWB unit. The internal power supply and rack-mount form factor make it a standard infrastructure component in large commercial wireless deployments.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eLarge commercial wireless systems — such as those found in houses of worship with 8–16 channels, broadcast studios, government conference facilities, or large auditoriums — require antenna distribution infrastructure that can consolidate RF signal paths while compensating for the signal loss introduced by passive splitting. The UA845UWB addresses this with active amplification across an ultra-wideband frequency range, eliminating the need for multiple frequency-specific distribution systems when a mix of Shure wireless product generations is in use. Each unit supports up to four receivers from one antenna pair; the two BNC CASCADE ports then allow connection to a fifth receiver or a second UA845UWB, enabling large multi-channel systems to run from a single, optimized antenna placement. For UHF-R (U4\/UR4) systems, the power OUTPUT connectors can supply DC power to up to five daisy-chained receivers from a single source — note this does not apply to ULX or ULX-D. The UA845UWB is available with and without cable; this listing is the cable-included version.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Way Active Antenna Distribution\u003c\/strong\u003e — Splits one pair of antennas to up to four wireless receivers while actively amplifying the RF signal to compensate for the insertion loss introduced by splitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Wideband Coverage (174–1805 MHz)\u003c\/strong\u003e — Covers VHF, UHF, 1.2, 1.5, and 1.8 GHz in a single unit, providing compatibility across Shure Axient Digital, UHF-R, ULX-D, QLX-D, SLX, and BLX4R wireless systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCASCADE Ports for System Expansion\u003c\/strong\u003e — Two 50 Ω BNC-type CASCADE connectors allow connection to a fifth receiver or a second UA845UWB, enabling large commercial wireless systems to operate from a single optimized antenna pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Distribution for UHF-R Receivers\u003c\/strong\u003e — Power OUTPUT connectors allow up to five U4 or UR4 receivers to be daisy-chained and powered from a single source, simplifying power infrastructure in large installations. (Does not apply to ULX or ULX-D receivers.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Power Supply\u003c\/strong\u003e — Self-contained internal power supply eliminates the need for external wall adapters or separate power distribution, reducing rack clutter in commercial AV installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack-Mount Form Factor\u003c\/strong\u003e — Designed for standard 19\" rack installation, integrating cleanly into commercial AV equipment racks alongside receivers and signal processing equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Current Shure Wireless Platforms\u003c\/strong\u003e — Verified compatibility with Axient Digital, UHF-R, ULX-D, QLX-D, SLX, and BLX4R wireless receivers operating within a compatible frequency range.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eUA845UWB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSystem Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eActive 5-way antenna splitter and power distribution system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eVHF, UHF, 1.2 GHz, 1.5 GHz, 1.8 GHz (174–1805 MHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eOutputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e4 receiver outputs + 2 CASCADE (BNC, 50 Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eAxient Digital, UHF-R, ULX-D, QLX-D, SLX, BLX4R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003ePower Supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eInternal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003ePower Distribution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eDC power output for up to 5 U4\/UR4 receivers (not applicable to ULX\/ULX-D)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eRack-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow many wireless receivers can share a single antenna pair using the UA845UWB?\u003c\/strong\u003e\u003cbr\u003eEach UA845UWB supports up to four wireless receivers from one antenna pair. Using the two CASCADE ports, a fifth receiver or a second UA845UWB can be connected, extending the system further.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan two UA845UWB units be cascaded together for larger systems?\u003c\/strong\u003e\u003cbr\u003eYes. The two BNC CASCADE ports allow connection to an additional UA845UWB, enabling large commercial wireless systems with many channels to operate from a single optimized antenna placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the UA845UWB power ULX-D receivers through its power output connectors?\u003c\/strong\u003e\u003cbr\u003eNo. The power distribution OUTPUT connectors are designed for U4 and UR4 (UHF-R) series receivers only. ULX and ULX-D receivers receive power separately through their own power supplies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat frequency systems is the UA845UWB compatible with?\u003c\/strong\u003e\u003cbr\u003eThe UA845UWB is compatible with Shure Axient Digital, UHF-R, ULX-D, QLX-D, SLX, and BLX4R wireless systems operating within a compatible frequency range. Its ultra-wideband design (174–1805 MHz) covers VHF through 1.8 GHz, making it suitable for multi-platform installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UA845UWB suitable for permanent commercial installations?\u003c\/strong\u003e\u003cbr\u003eYes. Its rack-mount form factor, internal power supply, and broad system compatibility make it well-suited for permanent commercial AV installations in conference centers, houses of worship, government facilities, and broadcast environments.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43658777067756,"sku":"UA845UWB","price":1158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua845uwb-ultra-wide-band-antenna-and-power-distribution-system-174-to-1805-mhz-ua845uwb-creation-networks-98849.jpg?v=1757909635"},{"product_id":"shure-ua860swb-passive-omnidirectional-antenna-ua860swb","title":"Shure UA860SWB – Passive Wideband Omnidirectional UHF Antenna","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA860SWB is a passive wideband omnidirectional UHF antenna designed to improve RF reception for commercial Shure wireless microphone systems. Operating across 470–1100 MHz with an omnidirectional dipole pattern and 2.15 dBi gain, it provides 360° coverage without the directional constraints of a log-periodic antenna, making it well-suited for conference rooms, boardrooms, and other commercial spaces where transmitters move freely across the coverage area. It is compatible with BLX4R, SLX, QLX-D, ULX-D, UHF-R, and Axient Digital wireless receivers.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eUnlike directional antennas that require careful aiming toward a defined coverage zone, the UA860SWB’s omnidirectional pattern delivers consistent RF coverage in all directions from the antenna’s position, making it particularly appropriate for applications where presenters or performers move freely throughout the room. Its wideband 470–1100 MHz coverage makes it usable across the majority of commercial UHF wireless frequency bands, including newer multi-band systems. The passive design requires no DC bias power, simplifying installation in systems where active antenna power is unavailable or where the antenna runs directly to a receiver without a distribution unit. For larger multi-receiver commercial installations, the UA860SWB pairs effectively with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua845uwb-ultra-wide-band-antenna-and-power-distribution-system-174-to-1805-mhz-ua845uwb\"\u003eShure UA845UWB Antenna Distribution System\u003c\/a\u003e. Mount options include standard BNC connection to the receiver or distribution system via 50 Ω coaxial cable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOmnidirectional Dipole Reception Pattern\u003c\/strong\u003e — Provides 360° RF coverage without requiring directional aiming, making it appropriate for commercial spaces where wireless transmitters move freely throughout the room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWideband 470–1100 MHz Coverage\u003c\/strong\u003e — Covers the majority of commercial UHF wireless frequency bands in a single antenna, supporting BLX4R, SLX, QLX-D, ULX-D, UHF-R, and Axient Digital systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.15 dBi Typical Gain\u003c\/strong\u003e — Provides modest gain over an isotropic radiator, improving system reception margin relative to whip antennas in commercial wireless installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Design — No DC Bias Required\u003c\/strong\u003e — Requires no power supply or DC bias from the connected receiver or distribution system, simplifying installation in straightforward commercial wireless deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproves Wireless Microphone Reception\u003c\/strong\u003e — Purpose-built to enhance UHF wireless audio system RF performance in commercial AV environments, particularly when replacing stock receiver whip antennas with remote-mounted antennas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eUA860SWB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e470–1100 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eReception Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eOmnidirectional dipole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eTypical Gain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e2.15 dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eActive\/Passive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003ePassive (no DC bias required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eBLX4R, SLX, QLX-D, ULX-D, UHF-R, Axient Digital\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the UA860SWB require a power supply or DC bias?\u003c\/strong\u003e\u003cbr\u003eNo. The UA860SWB is a passive antenna and requires no DC bias power from the receiver or distribution system. It connects directly via BNC coaxial cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the UA860SWB and a directional antenna like the UA874WB?\u003c\/strong\u003e\u003cbr\u003eThe UA860SWB provides 360° omnidirectional coverage without requiring directional aiming, making it appropriate for spaces where transmitters move freely. Directional antennas like the UA874WB offer higher on-axis gain and are preferred when coverage needs to be focused toward a defined area, such as a stage or podium.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UA860SWB compatible with Shure Axient Digital systems?\u003c\/strong\u003e\u003cbr\u003eYes. The UA860SWB is compatible with Axient Digital, UHF-R, ULX-D, QLX-D, SLX, and BLX4R wireless systems operating within the 470–1100 MHz frequency range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the UA860SWB be used with an antenna distribution system?\u003c\/strong\u003e\u003cbr\u003eYes. The UA860SWB can be connected to Shure antenna distribution systems such as the UA845UWB, allowing one or two UA860SWB antennas to serve multiple receivers simultaneously in a commercial wireless installation.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43658886512876,"sku":"UA860SWB","price":338.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua860swb-passive-omnidirectional-antenna-ua860swb-creation-networks-55697.jpg?v=1757909638"},{"product_id":"shure-ua860v-passive-omnidirectional-antenna-for-vhf-174-to-216-mhz-ua860v","title":"Shure UA860V – Passive Omnidirectional VHF Antenna 174–216 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA860V is a passive omnidirectional antenna designed for Shure VHF wireless systems operating in the 174–216 MHz frequency range. It improves RF signal reception for QLX-D and ULX-D wireless receivers using VHF frequency assignments, providing 360° coverage without requiring active amplification or DC bias power. Commercial AV integrators and IT\/facilities managers deploying VHF Shure wireless systems use the UA860V to enhance system reliability in conference rooms, training facilities, and similar commercial spaces.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eWhile UHF wireless systems dominate most new commercial deployments, many legacy and current VHF wireless systems remain in active service in conference rooms, government facilities, and educational environments. The UA860V specifically addresses antenna performance for these VHF systems, providing an omnidirectional receive antenna purpose-built for the 174–216 MHz band used by Shure QLX-D and ULX-D VHF products. The passive design requires no external power, simplifying installation in systems without active antenna distribution. For installations with multiple VHF receivers, the UA860V can be used in conjunction with compatible Shure antenna distribution systems. The omnidirectional pattern makes it appropriate for conference rooms and meeting spaces where wireless transmitters are not confined to a defined coverage zone. For VHF antenna extension cabling, standard 50 Ω BNC coaxial cable such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua850-50-bnc-to-bnc-remote-antenna-extension-cable-ua850\"\u003eShure UA850 BNC Coaxial Cable\u003c\/a\u003e is recommended.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Omnidirectional VHF Antenna\u003c\/strong\u003e — Provides 360° RF coverage for Shure VHF wireless systems in the 174–216 MHz band without requiring DC bias or active amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e174–216 MHz Frequency Coverage\u003c\/strong\u003e — Precisely designed for the VHF frequency range used by Shure QLX-D and ULX-D VHF wireless products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with QLX-D and ULX-D VHF Systems\u003c\/strong\u003e — Engineered for use with Shure QLX-D and ULX-D wireless microphone receivers operating in the VHF band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo DC Bias Required\u003c\/strong\u003e — Passive design connects directly via BNC coaxial cable without needing power from the receiver or distribution system, simplifying installation in existing commercial wireless infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproves VHF Wireless Reception\u003c\/strong\u003e — Delivers better system reception performance than stock receiver whip antennas, particularly when antenna placement can be optimized away from the equipment rack.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eUA860V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e174–216 MHz (VHF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eReception Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eOmnidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eActive\/Passive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003ePassive (no DC bias required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eShure QLX-D and ULX-D VHF wireless systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the UA860V work with UHF wireless systems?\u003c\/strong\u003e\u003cbr\u003eNo. The UA860V is specifically tuned for the 174–216 MHz VHF frequency range and is designed for use with Shure QLX-D and ULX-D VHF wireless products. For UHF wireless systems, the UA860SWB (470–1100 MHz) is the appropriate passive omnidirectional antenna.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the UA860V require power or DC bias?\u003c\/strong\u003e\u003cbr\u003eNo. The UA860V is a passive antenna requiring no external power supply or DC bias from the connected receiver or distribution system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the UA860V be used with an antenna distribution system?\u003c\/strong\u003e\u003cbr\u003eYes. When multiple VHF receivers share a common antenna position, the UA860V can be used with compatible Shure antenna distribution systems to split the signal to multiple receivers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cable should be used with the UA860V?\u003c\/strong\u003e\u003cbr\u003eShure recommends 50 Ω low-loss coaxial cable with BNC connectors for antenna runs. The Shure UA850 (50 ft) is a compatible cable option for commercial installations.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43658887856364,"sku":"UA860V","price":422.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua860v-passive-omnidirectional-antenna-for-vhf-174-to-216-mhz-ua860v-creation-networks-57208.jpg?v=1757909638"},{"product_id":"shure-ua874wb-wideband-active-directional-antenna-470-to-900-mhz-ua874wb","title":"Shure UA874WB – Wideband Active Directional Antenna 470–900 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA874WB is a wideband active directional antenna covering 470–900 MHz, designed to improve UHF wireless microphone system reception in commercial AV deployments. Using a log periodic dipole array, it delivers 7.5 dBi on-axis gain with a 70° 3 dB beam width, and a four-position switchable gain setting (−6 dB to +12 dB) allows the installer to compensate precisely for varying cable run lengths. The UA874WB’s broad frequency coverage makes it compatible with a wide range of Shure UHF wireless products across the 470–900 MHz range, including systems used in commercial conference, broadcast, and live production environments.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eActive directional antennas are the preferred choice in commercial wireless installations where coverage needs to be concentrated toward a defined area — a stage, podium, or meeting room — while rejecting RF interference arriving from other directions. The UA874WB’s log periodic dipole array provides a cardioid-like directional pattern aimed toward the coverage zone, combined with active amplification to recover signal lost in antenna cable runs. The four-position gain switch is calibrated to common cable loss scenarios, giving integrators direct control over the total RF path gain budget without requiring spectrum analyzer measurements during installation. The integrated swivel adapter enables mounting on a microphone stand, ceiling mount, or wall bracket, offering flexibility for diverse commercial installation types. Power is supplied via DC bias through the coaxial cable from a compatible receiver or antenna distribution system — the UA874WB requires 10–15 V DC bias at 75 mA and will not operate without it. For large multi-channel installations, the UA874WB pairs well with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua845uwb-ultra-wide-band-antenna-and-power-distribution-system-174-to-1805-mhz-ua845uwb\"\u003eShure UA845UWB Antenna Distribution System\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLog Periodic Dipole Array\u003c\/strong\u003e — Provides a directional cardioid-pattern receive characteristic aimed toward the coverage area, improving desired signal reception while rejecting off-axis RF interference in commercial wireless environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.5 dBi On-Axis Antenna Gain\u003c\/strong\u003e — Delivers 7.5 dBi of antenna gain in the beam direction, significantly improving signal margin over passive omnidirectional antennas in longer-range or interference-prone commercial deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70° 3 dB Beam Width\u003c\/strong\u003e — The 70-degree beam provides a practical coverage angle for most commercial room installations without requiring extremely precise aiming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Position Switchable Signal Gain (−6 to +12 dB)\u003c\/strong\u003e — Adjustable in nominal steps of +12 dB, +6 dB, 0 dB, and −6 dB (±1 dB), allowing precise compensation for coaxial cable run loss in commercial AV installations with varying cable lengths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWideband 470–900 MHz Coverage\u003c\/strong\u003e — Covers the majority of commercial UHF wireless frequency bands in a single antenna, compatible with Shure wireless systems operating in this range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Swivel Adapter\u003c\/strong\u003e — Built-in swivel adapter enables mounting on microphone stands, ceilings, or walls without additional mounting hardware, accommodating diverse commercial installation types.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Overload LED Indicator\u003c\/strong\u003e — Integrated LED indicates when the antenna amplifier is receiving an excessively strong RF signal, helping technicians adjust gain settings and transmitter distance for optimal system performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Female Connector, 50 Ω\u003c\/strong\u003e — Industry-standard BNC termination at 50 Ω impedance connects directly to Shure wireless receivers and antenna distribution systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eUA874WB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e470–900 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eLog periodic dipole array\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eAntenna Gain (On Axis)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e7.5 dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003e3 dB Beam Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e70 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSignal Gain (Switchable)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e+12 dB, +6 dB, 0 dB, −6 dB (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eOIP3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u0026gt;30 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eBNC Female, 50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003ePower Requirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e10–15 V DC bias via coaxial, 75 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e316 × 359 × 36 mm (H × W × D)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e317 g (11.2 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e−18°C to 63°C (0°F to 145°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the UA874WB require a power supply?\u003c\/strong\u003e\u003cbr\u003eYes. The UA874WB requires 10–15 V DC bias at 75 mA supplied through the coaxial cable from a compatible Shure wireless receiver or antenna distribution system. The antenna will not operate without this bias voltage, including at the −6 dB and 0 dB gain settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I set the gain on the UA874WB?\u003c\/strong\u003e\u003cbr\u003eSet the gain to compensate for calculated coaxial cable signal loss only. Use the cable manufacturer’s loss specification to calculate the expected loss for your cable length and type, then select the gain setting closest to that value. Adding excess gain degrades rather than improves system performance by amplifying noise and RF interference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the UA874WB be used with Shure Axient Digital systems?\u003c\/strong\u003e\u003cbr\u003eYes, provided the Axient Digital system operates within the 470–900 MHz frequency range covered by the UA874WB and the connected receiver or distribution system supplies the required DC bias.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the UA874WB and the UA860SWB for commercial installations?\u003c\/strong\u003e\u003cbr\u003eThe UA874WB is an active directional antenna with 7.5 dBi gain and a 70° beam, suited for installations where coverage needs to be focused on a defined area (stage, podium, presentation zone). The UA860SWB is a passive omnidirectional antenna providing 360° coverage, suited for spaces where transmitters move freely without a defined coverage zone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UA874WB suitable for permanent commercial installation?\u003c\/strong\u003e\u003cbr\u003eYes. The UA874WB can be permanently mounted on a microphone stand, ceiling, or wall using the integrated swivel adapter. It should not be used in permanent outdoor installations or exposed to extreme moisture.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43658889855212,"sku":"UA874WB","price":444.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua874wb-wideband-active-directional-antenna-470-to-900-mhz-ua874wb-creation-networks-71504.jpg?v=1757909648"},{"product_id":"shure-active-directional-antenna-with-gain-switch-902-960-mhz-ua874xa","title":"Shure UA874XA – Active Directional Antenna with Gain Switch 902–960 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA874XA is an active directional antenna for Shure wireless systems operating in the 902–960 MHz frequency range, covering the X52 band and 900 MHz ISM\/DECT spectrum used by Axient Digital and ULX-D systems. Using a log periodic dipole array, it delivers 7.5 dBi on-axis gain with a 70° 3 dB beam width and four switchable gain settings (−6 dB to +12 dB) for precise cable loss compensation. For commercial AV integrators deploying Shure wireless systems in the 902–960 MHz band, the UA874XA is the correct active directional antenna for rack-to-antenna infrastructure.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe 902–960 MHz frequency band is increasingly important in commercial wireless system design, as it offers spectrum options in regions where lower UHF bands face greater congestion or regulatory pressure. The UA874XA is specifically designed for this band, providing directional active antenna infrastructure for Shure wireless receivers with X52 band assignments. The log periodic dipole array concentrates RF coverage toward the intended transmitter location, while the switchable gain control allows the integrator to dial in the correct gain for the cable run length without overgaining the system — a common cause of reduced range and interference in commercial wireless deployments. The integrated swivel adapter supports stand, ceiling, or wall mounting. The UA874XA requires 10–15 V DC bias at 75 mA through the coaxial cable from a connected Shure receiver or antenna distribution system. For large systems, the UA874XA pairs with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua845uwb-ultra-wide-band-antenna-and-power-distribution-system-174-to-1805-mhz-ua845uwb\"\u003eShure UA845UWB Antenna Distribution System\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLog Periodic Dipole Array for 902–960 MHz\u003c\/strong\u003e — Provides a cardioid-pattern directional reception characteristic tuned to the 902–960 MHz band, improving signal capture from transmitters while rejecting off-axis RF interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.5 dBi On-Axis Antenna Gain\u003c\/strong\u003e — Delivers 7.5 dBi antenna gain on-axis, providing substantial signal margin improvement over passive or omnidirectional antenna alternatives in commercial wireless installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70° 3 dB Beam Width\u003c\/strong\u003e — The 70-degree beam provides practical directional coverage for conference rooms, boardrooms, and similar commercial spaces without requiring highly precise aiming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Position Switchable Signal Gain (−6 to +12 dB)\u003c\/strong\u003e — Allows precise compensation for coaxial cable loss at +12 dB, +6 dB, 0 dB, or −6 dB (±1 dB) settings, matching gain to the specific cable run in the commercial installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Swivel Mount Adapter\u003c\/strong\u003e — Enables microphone stand, ceiling, or wall mounting without additional hardware, supporting diverse commercial AV installation configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Overload LED\u003c\/strong\u003e — Provides a visual alert when the antenna amplifier is receiving an excessively strong RF signal, enabling technicians to adjust gain settings or transmitter proximity during commissioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Female Connector, 50 Ω\u003c\/strong\u003e — Standard BNC termination at 50 Ω impedance for direct connection to Shure wireless receivers and antenna distribution systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eUA874XA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e902–960 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eLog periodic dipole array\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eAntenna Gain (On Axis)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e7.5 dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003e3 dB Beam Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e70 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSignal Gain (Switchable)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e+12 dB, +6 dB, 0 dB, −6 dB (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eOIP3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u0026gt;30 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eBNC Female, 50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003ePower Requirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e10–15 V DC bias via coaxial, 75 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e224 × 234 × 36 mm (H × W × D)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e213 g (7.5 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e−18°C to 63°C (0°F to 145°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the UA874XA require power?\u003c\/strong\u003e\u003cbr\u003eYes. The UA874XA requires 10–15 V DC bias at 75 mA through the coaxial cable from a compatible Shure wireless receiver or antenna distribution system. The antenna does not operate without this bias voltage, even at the −6 dB and 0 dB gain settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat Shure wireless systems use the 902–960 MHz band covered by the UA874XA?\u003c\/strong\u003e\u003cbr\u003eThe 902–960 MHz band corresponds to the X52 frequency assignment in Shure ULX-D and other wireless systems. This band is also used by certain Axient Digital configurations. Consult your specific receiver’s frequency band designation to confirm compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I select the correct gain setting on the UA874XA?\u003c\/strong\u003e\u003cbr\u003eCalculate the expected signal loss for your antenna cable run using the cable manufacturer’s per-100-foot loss specification, then select the gain setting closest to that loss value. Avoid adding gain beyond what is needed to compensate for cable loss, as excess gain amplifies RF interference and can reduce system performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the UA874XA be used in a permanent installation?\u003c\/strong\u003e\u003cbr\u003eYes. The UA874XA can be permanently mounted on a stand, wall, or ceiling using the integrated swivel adapter. It should not be installed in permanent outdoor locations or environments with extreme moisture.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43658891722988,"sku":"UA874XA","price":444.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-active-directional-antenna-with-gain-switch-902-960-mhz-ua874xa-creation-networks-67054.jpg?v=1757909649"},{"product_id":"shure-ua874v-active-directional-antenna-for-vhf-174-to-216-mhz-ua874v","title":"Shure UA874V – Active Directional Antenna for VHF 174–216 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA874V is an active directional antenna for Shure VHF wireless systems operating in the 174–216 MHz frequency range. Using a log periodic dipole array, it delivers 7.5 dBi on-axis gain with a 70° beam width and four switchable gain positions, providing the active antenna infrastructure needed to extend VHF wireless coverage in commercial AV deployments where receiver-mounted whip antennas are insufficient. For integrators managing VHF-band Shure wireless systems in fixed commercial installations, the UA874V is the purpose-built active directional solution for this frequency range.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eMany commercial environments — conference centers, government facilities, educational institutions, and houses of worship — operate Shure VHF wireless systems that require remote antenna placement for adequate RF coverage of the space. The UA874V addresses this need with a log periodic dipole array that focuses reception toward the intended coverage area while actively amplifying the received signal to compensate for coaxial cable run loss. The four-position gain switch allows the installer to precisely dial in the gain needed for the specific cable length, avoiding the system degradation caused by excessive amplification. The integrated swivel adapter supports mounting on microphone stands, ceilings, or walls, providing flexibility for diverse commercial installation configurations. DC bias power (10–15 V at 75 mA) is required through the coaxial cable from the connected receiver or antenna distribution system. For large VHF wireless systems requiring antenna distribution, the UA874V connects to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua845uwb-ultra-wide-band-antenna-and-power-distribution-system-174-to-1805-mhz-ua845uwb\"\u003eShure UA845UWB Antenna Distribution System\u003c\/a\u003e, which covers the VHF band. For passive VHF omnidirectional coverage, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua860v-passive-omnidirectional-antenna-for-vhf-174-to-216-mhz-ua860v\"\u003eShure UA860V Omnidirectional VHF Antenna\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLog Periodic Dipole Array for VHF (174–216 MHz)\u003c\/strong\u003e — Provides a cardioid-pattern directional reception characteristic tuned to the 174–216 MHz VHF band, improving signal capture from VHF wireless transmitters while rejecting off-axis interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.5 dBi On-Axis Antenna Gain\u003c\/strong\u003e — Delivers 7.5 dBi of antenna gain in the beam direction, providing substantial signal margin over passive or omnidirectional alternatives in commercial VHF wireless installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70° 3 dB Beam Width\u003c\/strong\u003e — A 70-degree beam provides practical directional coverage for commercial room installations without requiring highly precise antenna aiming during deployment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Position Switchable Signal Gain (−6 to +12 dB)\u003c\/strong\u003e — Adjustable in nominal steps of +12 dB, +6 dB, 0 dB, and −6 dB (±1 dB) to compensate precisely for coaxial cable loss in commercial AV installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Swivel Mount Adapter\u003c\/strong\u003e — Supports stand, ceiling, or wall mounting without additional hardware, providing commercial installation flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Amplification with DC Bias\u003c\/strong\u003e — Integrated amplifier compensates for coaxial cable insertion loss; powered via 10–15 V DC bias from the connected receiver or distribution system through the coaxial cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Overload LED Indicator\u003c\/strong\u003e — Visual alert when the amplifier is being overloaded by excessive RF signal strength, helping technicians properly configure gain settings during system commissioning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eUA874V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e174–216 MHz (VHF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eLog periodic dipole array\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eAntenna Gain (On Axis)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e7.5 dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003e3 dB Beam Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e70 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eSignal Gain (Switchable)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e+12 dB, +6 dB, 0 dB, −6 dB (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eOIP3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u0026gt;30 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eBNC Female, 50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003ePower Requirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e10–15 V DC bias via coaxial, 75 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e\u003cstrong\u003eReception Direction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eDirectional (cardioid pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the UA874V require power?\u003c\/strong\u003e\u003cbr\u003eYes. The UA874V requires 10–15 V DC bias at 75 mA through the coaxial cable from a compatible Shure wireless receiver or antenna distribution system. It will not operate without this bias voltage, including at the −6 dB and 0 dB passive gain settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat Shure VHF wireless systems is the UA874V compatible with?\u003c\/strong\u003e\u003cbr\u003eThe UA874V is designed for Shure wireless systems operating in the 174–216 MHz VHF frequency range. Confirm your specific system’s frequency band assignment before ordering to ensure compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I use the UA874V instead of the UA860V?\u003c\/strong\u003e\u003cbr\u003eUse the UA874V when coverage needs to be directed toward a specific area (stage, podium, front of room) and when the antenna cable run requires active gain compensation. The UA860V is a passive omnidirectional antenna suited for spaces where transmitters move freely and cable runs are short enough not to require amplification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the UA874V compatible with antenna distribution systems?\u003c\/strong\u003e\u003cbr\u003eYes. The UA874V connects to compatible Shure antenna distribution systems such as the UA845UWB, which covers the VHF frequency range, enabling one or two UA874V antennas to serve multiple VHF wireless receivers simultaneously.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the UA874V be permanently installed?\u003c\/strong\u003e\u003cbr\u003eYes. The integrated swivel adapter supports permanent mounting on stands, ceilings, or walls. Do not install the UA874V in permanent outdoor locations or environments subject to extreme moisture.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43658892968172,"sku":"UA874V","price":557.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/shure-ua874v-active-directional-antenna-for-vhf-174-to-216-mhz-ua874v-creation-networks-70546.jpg?v=1757909651"},{"product_id":"teradek-antenna-array-for-bolt-4k-4-9-7-3-ghz-gold-mount","title":"Teradek Antenna Array for Ranger 4K 4.9-7.3 GHz (Gold Mount)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Teradek Antenna Array for Ranger 4K (Gold Mount) is a directional panel antenna array designed to extend the wireless range of the Teradek Ranger 4K system to up to 5,000 feet line of sight across the 4.9–7.3 GHz frequency band. The Gold Mount battery plate on the antenna array powers the unit via Anton\/Bauer-compatible professional batteries, enabling extended-range deployments at video village, remote monitor positions, or base camp without DC cabling.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Ranger 4K Antenna Array Gold Mount provides a high-gain directional panel antenna system that replaces standard antennas on the Ranger 4K receiver, focusing the receive pattern toward the transmitter to significantly extend usable range to 5,000 feet. The array operates across 4.9–7.3 GHz to accommodate the Ranger 4K’s operating frequencies. The Gold Mount battery plate enables battery-powered operation at remote positions. This antenna array is designed specifically for the Ranger 4K system and is compatible with the Gold Mount and V-Mount RX units.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ranger 4K Range to 5,000 ft\u003c\/strong\u003e — Directional panel antenna system for long-distance wireless video.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.9–7.3 GHz Operation\u003c\/strong\u003e — Covers the full Ranger 4K operating frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Mount Battery Plate\u003c\/strong\u003e — Integrated for battery-powered remote antenna deployment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for Ranger 4K\u003c\/strong\u003e — Purpose-built for the Ranger 4K receiver system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional High-Gain Design\u003c\/strong\u003e — Focused receive pattern for maximum range extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible System\u003c\/td\u003e\n\u003ctd\u003eTeradek Ranger 4K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtended Range\u003c\/td\u003e\n\u003ctd\u003eUp to 5,000 ft line of sight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Range\u003c\/td\u003e\n\u003ctd\u003e4.9–7.3 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Mount\u003c\/td\u003e\n\u003ctd\u003eGold Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntenna Type\u003c\/td\u003e\n\u003ctd\u003eDirectional panel array\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003eIs this antenna array compatible with Bolt 4K systems?\u003c\/dt\u003e\n\u003cdd\u003eThis antenna array is designed specifically for the Ranger 4K system. For Bolt 4K long-range, see the 4K Array Panel antenna. Contact Creation Networks for guidance.\u003c\/dd\u003e\n\u003cdt\u003eDoes the Gold Mount version differ from the V-Mount version?\u003c\/dt\u003e\n\u003cdd\u003eThe Gold Mount version uses Anton\/Bauer-style battery plates. All antenna performance specifications are identical to the V-Mount version.\u003c\/dd\u003e\n\u003cdt\u003eWhat warranty applies?\u003c\/dt\u003e\n\u003cdd\u003eTeradek standard limited warranty. Contact Creation Networks for support.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Teradek","offers":[{"title":"Default Title","offer_id":43786985341164,"sku":"11-0888-G","price":1490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/teradek-antenna-array-for-ranger-4k-4-9-7-3-ghz-gold-mount-creation-networks-12666.webp?v=1757914886"},{"product_id":"teradek-antenna-array-for-ranger-4k-4-9-7-3-ghz-v-mount","title":"Teradek Antenna Array for Ranger 4K 4.9-7.3 GHz (V-Mount)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Teradek Antenna Array for Ranger 4K (V-Mount) is a directional panel antenna array that extends the Teradek Ranger 4K system’s wireless range to up to 5,000 feet across the 4.9–7.3 GHz frequency band. The V-Mount battery plate enables battery-powered antenna deployment at remote video village, monitor, or base camp positions without DC cabling. Designed specifically for the Ranger 4K RX system.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Ranger 4K Antenna Array V-Mount replaces standard antennas on the Ranger 4K receiver with a high-gain directional panel that focuses the receive pattern toward the transmitter, extending usable range to 5,000 feet. Covers 4.9–7.3 GHz. V-Mount battery plate enables untethered remote deployment using standard professional batteries. Compatible with Ranger 4K Gold Mount and V-Mount RX units.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ranger 4K Range to 5,000 ft\u003c\/strong\u003e — Directional high-gain panel for maximum wireless video range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.9–7.3 GHz Operation\u003c\/strong\u003e — Full Ranger 4K frequency coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Mount Battery Plate\u003c\/strong\u003e — Integrated for battery-powered remote deployment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for Ranger 4K\u003c\/strong\u003e — Purpose-built for the Ranger 4K receiver system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible System\u003c\/td\u003e\n\u003ctd\u003eTeradek Ranger 4K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtended Range\u003c\/td\u003e\n\u003ctd\u003eUp to 5,000 ft line of sight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Range\u003c\/td\u003e\n\u003ctd\u003e4.9–7.3 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Mount\u003c\/td\u003e\n\u003ctd\u003eV-Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntenna Type\u003c\/td\u003e\n\u003ctd\u003eDirectional panel array\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003eHow does the V-Mount version differ from Gold Mount?\u003c\/dt\u003e\n\u003cdd\u003eUses V-mount battery plates. All antenna performance specifications are identical.\u003c\/dd\u003e\n\u003cdt\u003eWhat warranty applies?\u003c\/dt\u003e\n\u003cdd\u003eTeradek standard limited warranty. Contact Creation Networks.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Teradek","offers":[{"title":"Default Title","offer_id":43786987733228,"sku":"11-0888-V","price":1490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/teradek-antenna-array-for-ranger-4k-4-9-7-3-ghz-v-mount-creation-networks-11878.webp?v=1757914897"},{"product_id":"shure-ua844-antenna-distribution-system-ua844-swb","title":"Shure UA844+SWB – UHF Wideband Antenna Distribution System","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA844+SWB is a 5-way active UHF wideband antenna distribution system covering 470 to 960 MHz, designed for commercial AV installations deploying multiple Shure wireless microphone receivers in a single rack. It splits one pair of antenna inputs across up to five receiver outputs while simultaneously delivering DC power to each receiver, eliminating the need for individual power supplies at each rack position. Compatible with Shure QLX-D, ULX-D, ULX, SLX, and BLX4R wireless systems, the UA844+SWB is the standard infrastructure component for scalable wireless microphone deployments in auditoriums, government spaces, houses of worship, and commercial conference environments. A cascade port allows chaining additional units for larger systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe UA844+SWB occupies a standard 1RU rack space and is engineered to serve as the RF distribution backbone for multi-channel wireless microphone systems in commercial AV integration projects. Its wideband 470–960 MHz coverage spans the frequency ranges of current and previous-generation Shure wireless systems, providing long-term compatibility as systems are upgraded or expanded. The active splitter design compensates for cable and splitting losses, maintaining signal integrity across all output ports. BNC connectors on both antenna inputs and all five receiver outputs align with professional installation standards and support the use of remote antennas positioned for optimal coverage in challenging RF environments. The integrated DC power distribution, outputting 14–18 V DC per port with a combined 2.5 A maximum, simplifies rack wiring and reduces the number of power supply runs required in structured AV installations. For compatible rack-mount wireless receivers, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ulxd4q-g50-ulx-d-series-quad-channel-digital-wireless-mic-receiver-g50-band-470-536mhz\"\u003eShure ULXD4Q Quad-Channel Wireless Receiver\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Way Active Antenna Splitting\u003c\/strong\u003e — Distributes a single pair of antennas to up to five wireless receivers simultaneously, reducing antenna runs and simplifying installation in multi-channel wireless systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF Wideband Coverage (470–960 MHz)\u003c\/strong\u003e — Covers the full frequency range of current and legacy Shure wireless systems, providing broad system compatibility in commercial AV deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated DC Power Distribution\u003c\/strong\u003e — Supplies 14–18 V DC to up to four receivers (combined max 2.5 A), consolidating power infrastructure and reducing rack cabling complexity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascade Port\u003c\/strong\u003e — Enables chaining of additional UA844+ units to scale antenna distribution beyond five channels in large-venue and multi-zone installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-Ohm BNC Connectors\u003c\/strong\u003e — Standard professional RF impedance on all antenna and receiver ports, compatible with coaxial cable infrastructure in structured AV systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 dB Output Port Isolation (typical)\u003c\/strong\u003e — Maintains signal separation between receiver outputs, preventing inter-receiver interference in densely packed rack configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1RU Rack-Mount Form Factor\u003c\/strong\u003e — Standard rack height integrates cleanly into AV equipment racks in any commercial installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBias Voltage Output\u003c\/strong\u003e — Provides 15 V DC bias on two ports to power active antennas such as the Shure UA874, UA870, and UA830 without a separate power injector.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardroom and executive conference room wireless microphone infrastructure\u003c\/li\u003e\n\u003cli\u003eHouse of worship multi-channel wireless system installations\u003c\/li\u003e\n\u003cli\u003eGovernment and municipal meeting space AV deployments\u003c\/li\u003e\n\u003cli\u003eAuditorium and performing arts center wireless distribution\u003c\/li\u003e\n\u003cli\u003eBroadcast studio wireless microphone rack systems\u003c\/li\u003e\n\u003cli\u003eAll-hands room and town hall multi-channel wireless installations\u003c\/li\u003e\n\u003cli\u003eMulti-purpose and training room scalable wireless AV infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;font-weight:bold;\"\u003eFrequency Range\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e470–960 MHz (UHF Wideband)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;font-weight:bold;\"\u003eImpedance\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e50 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;font-weight:bold;\"\u003eAntenna Inputs\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e2 (BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;font-weight:bold;\"\u003eReceiver Outputs\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e5 (BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;font-weight:bold;\"\u003eCascade Port\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eYes (1 pair BNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;font-weight:bold;\"\u003eOutput Intercept Point\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e21 dBm (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;font-weight:bold;\"\u003eOutput Port Isolation\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e30 dB (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;font-weight:bold;\"\u003eDC Output per Port\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e14–18 V DC, combined max 2.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;font-weight:bold;\"\u003eBias Voltage\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e15 V DC, 150 mA max (2 ports)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;font-weight:bold;\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e-18°C to 63°C (0°F to 145°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;font-weight:bold;\"\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e45 × 483 × 172 mm (1RU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;font-weight:bold;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e1.62 kg (3.6 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich Shure wireless systems are compatible with the UA844+SWB?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e\u003cp\u003eThe UA844+SWB is compatible with Shure QLX-D, ULX-D, ULX, SLX, and BLX4R wireless receivers. Its 470–960 MHz wideband coverage spans the operating frequency ranges of all current and previous-generation Shure UHF wireless systems.\u003c\/p\u003e\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow many receivers can a single UA844+SWB support?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e\u003cp\u003eOne UA844+SWB provides five receiver output ports. Additional units can be cascaded via the built-in cascade port to support larger multi-channel installations without adding separate antenna runs.\u003c\/p\u003e\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the UA844+SWB power the connected receivers?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e\u003cp\u003eYes. The unit provides 14–18 V DC on up to four receiver ports (combined maximum 2.5 A), which can eliminate the need for individual receiver power supplies in many rack configurations. Verify the current draw of your specific receivers before relying on this for all ports simultaneously.\u003c\/p\u003e\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use active remote antennas with the UA844+SWB?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e\u003cp\u003eYes. The UA844+SWB provides 15 V DC bias voltage on two of its antenna input ports, enabling use of Shure active antennas such as the UA874, UA870, and UA830 without a separate power injector.\u003c\/p\u003e\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat cable type is required for the antenna connections?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e\u003cp\u003eThe UA844+SWB uses BNC connectors on all antenna and receiver ports. Standard 50-ohm coaxial cable (RG8X or RG58 for short runs; low-loss coaxial for longer remote antenna installations) is appropriate. Cable loss increases with run length at UHF frequencies, so keep antenna cable runs as short as practical.\u003c\/p\u003e\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":43831071375596,"sku":"UA844+SWB","price":675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/6dd68f51bdb3f3cd12a11b3271115b2d.jpg?v=1757916929"},{"product_id":"shure-ua221-ta-passive-antenna-splitter-combiner-for-shure-wireless-receivers-taa-compliant","title":"Shure UA221-TA Passive Antenna Splitter \/ Combiner for Shure Wireless Receivers (TAA-Compliant)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Shure UA221-TA is a TAA-compliant passive antenna splitter\/combiner for Shure wireless microphone receivers. It splits one incoming antenna signal into two outgoing signals — or combines two incoming signals into one — allowing a single antenna to serve multiple receivers, or two antenna feeds to be consolidated into one receiver input. Each kit includes two UA221 units, four coaxial cables, and attaching hardware, providing a complete passive antenna distribution solution out of the box. TAA compliance qualifies this accessory for US government and federally funded AV procurement programs.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe UA221-TA is designed for rack-based wireless microphone deployments where antenna sharing between multiple receivers is required. The passive design requires no power and introduces no active signal processing, making it a simple and reliable component for antenna distribution infrastructure. By splitting a single high-gain antenna feed across two receiver inputs, integrators can reduce the number of ceiling or wall antenna penetrations in a commercial installation while maintaining signal quality. The UA221-TA is compatible with a broad range of Shure wireless receivers including UC4, SLX4, ULXS4, ULXP4, U4S, and U4D platforms. The two-unit kit provides flexibility for both split and combine configurations within the same deployment. TAA compliance ensures this component can be specified on US government contracts requiring domestically eligible products.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Antenna Splitting and Combining\u003c\/strong\u003e — Splits one antenna signal into two receiver inputs, or combines two antenna sources into one input, with no external power required and no active circuitry to fail or degrade over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Unit Kit\u003c\/strong\u003e — Each package includes two UA221 splitter\/combiner units, four coaxial cables, and attaching hardware for a complete antenna distribution solution in a single purchase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Receiver Compatibility\u003c\/strong\u003e — Compatible with Shure UC4, SLX4, ULXS4, ULXP4, U4S, and U4D wireless receivers, supporting multi-generation Shure wireless deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTAA Compliant\u003c\/strong\u003e — Meets Trade Agreements Act requirements for US federal government, military, and GSA-schedule AV procurement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple Rack Integration\u003c\/strong\u003e — Passive coaxial design attaches easily to standard receiver antenna ports, reducing installation complexity in commercial rack-based wireless microphone systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px;border:1px solid #ccc;background:#f5f5f5;\"\u003eParameter\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px;border:1px solid #ccc;background:#f5f5f5;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eType\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003ePassive antenna splitter \/ combiner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eOperation\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eSplits 1 input to 2 outputs, or combines 2 inputs to 1 output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003ePower Required\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eNone (passive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eKit Contents\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003e2 × UA221 units, 4 coaxial cables, attaching hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eCompatible Receivers\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eShure UC4, SLX4, ULXS4, ULXP4, U4S, U4D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eTAA Compliant\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ccc;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":44579923656940,"sku":"UA221-TA","price":226.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/shure-ua221-ta-passive-antenna-splitter-combiner-for-shure-wireless-receivers-taa-compliant-creation-networks-74987.jpg?v=1757936646"},{"product_id":"shure-ua7-518-542-ta-filter-antenna-for-adx1-and-ad1-bodypack-transmitters-518-to-542-mhz-taa-compliant","title":"Shure UA7-518-542-TA Filter Antenna for ADX1 and AD1 Bodypack Transmitters (518 to 542 MHz) (TAA-Compliant)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure UA7-518-542-TA is a replacement SAW (Surface Acoustic Wave) filter whip antenna precision-tuned for the 518–542 MHz frequency range, designed for use with Shure ADX1 and AD1 bodypack transmitters. This TAA-compliant wireless antenna provides enhanced interference rejection compared to standard whip antennas, making it valuable in high-density RF environments where multiple wireless systems operate simultaneously. It is a direct-fit replacement for worn or damaged antenna elements in Axient Digital and Axient wireless deployments.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Shure UA7 SAW filter antenna improves signal reliability when Shure PSM receivers are operating near wireless microphone transmitters by rejecting out-of-band interference at the antenna element itself. The yellow-coded end cap provides immediate visual identification of the 518–542 MHz band — essential when managing multi-channel wireless inventories in touring, installed AV, or broadcast environments. As a direct-fit replacement for ADX1 and AD1 transmitters, it maintains full compatibility with existing Shure Axient Digital wireless infrastructure. Commercial AV integrators should maintain spare antennas to minimize system downtime during live events or installed system maintenance. For adjacent frequency coverage, see also the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua7-542-574-ta-filter-antenna-for-adx1-and-ad1-bodypack-transmitters-542-to-574-mhz-taa-compliant\"\u003eShure UA7-542-574-TA (542–574 MHz)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAW Filter Technology\u003c\/strong\u003e — Surface Acoustic Wave filter provides greater interference rejection than standard whip antennas, protecting signal integrity in congested RF environments during multi-system wireless deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e518–542 MHz Precision Tuning\u003c\/strong\u003e — Antenna is tuned specifically to the 518–542 MHz band, ensuring optimal radiation and reception characteristics for compatible Shure transmitters within this frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor-Coded Identification\u003c\/strong\u003e — Yellow end cap enables quick visual identification of the 518–542 MHz frequency range during multi-frequency wireless system deployment, inventory management, and field maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADX1 and AD1 Compatibility\u003c\/strong\u003e — Designed as a verified direct replacement for Shure Axient Digital ADX1 and Axient AD1 bodypack transmitters, maintaining system integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTAA-Compliant\u003c\/strong\u003e — Meets Trade Agreements Act requirements, qualifying for federal, state, and local government procurement programs where country-of-origin compliance is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Fit Replacement\u003c\/strong\u003e — Drop-in replacement for worn or damaged antenna elements with no transmitter modification required, minimizing system downtime.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eUA7-518-542-TA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e518–542 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eSAW (Surface Acoustic Wave) Filter Whip Antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eColor Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYellow cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompatible Transmitters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eShure ADX1, AD1 bodypack transmitters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTAA-Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":44579925557484,"sku":"UA7-518-542-TA","price":59.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/shure-ua7-518-542-ta-filter-antenna-for-adx1-and-ad1-bodypack-transmitters-518-to-542-mhz-taa-compliant-creation-networks-20175.jpg?v=1757936647"},{"product_id":"shure-ua7-542-574-ta-filter-antenna-for-adx1-and-ad1-bodypack-transmitters-542-to-574-mhz-taa-compliant","title":"Shure UA7-542-574-TA Filter Antenna for ADX1 and AD1 Bodypack Transmitters (542 to 574 MHz) (TAA-Compliant)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure UA7-542-574-TA is a replacement SAW (Surface Acoustic Wave) filter whip antenna precision-tuned for the 542–574 MHz frequency range, designed for use with Shure ADX1 and AD1 bodypack transmitters. This TAA-compliant wireless antenna provides enhanced interference rejection compared to standard whip antennas, making it suitable for high-density RF environments where multiple wireless microphone systems operate concurrently. It is a direct-fit replacement for worn or damaged antenna elements in Axient Digital and Axient wireless deployments.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Shure UA7 SAW filter antenna improves signal reliability when Shure PSM receivers operate near wireless microphone transmitters by rejecting out-of-band interference at the antenna element. The black-coded end cap provides immediate visual identification of the 542–574 MHz band, which is critical when managing multi-channel wireless inventories in touring, installed AV, or broadcast environments. As a direct-fit replacement for ADX1 and AD1 transmitters, it maintains full compatibility with existing Shure Axient Digital wireless infrastructure. For adjacent frequency coverage, see also the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua7-518-542-ta-filter-antenna-for-adx1-and-ad1-bodypack-transmitters-518-to-542-mhz-taa-compliant\"\u003eShure UA7-518-542-TA (518–542 MHz)\u003c\/a\u003e or the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua7-574-606-ta-filter-antenna-for-adx1-and-ad1-bodypack-transmitters-574-to-606-mhz-taa-compliant\"\u003eShure UA7-574-606-TA (574–606 MHz)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAW Filter Technology\u003c\/strong\u003e — Surface Acoustic Wave filter provides greater interference rejection than standard whip antennas, protecting signal integrity in congested RF environments during multi-system wireless deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e542–574 MHz Precision Tuning\u003c\/strong\u003e — Antenna is tuned specifically to the 542–574 MHz band, ensuring optimal radiation and reception characteristics for compatible Shure transmitters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor-Coded Identification\u003c\/strong\u003e — Black end cap enables quick visual identification of the 542–574 MHz frequency range during multi-frequency wireless system deployment and inventory management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADX1 and AD1 Compatibility\u003c\/strong\u003e — Designed as a verified direct replacement for Shure Axient Digital ADX1 and Axient AD1 bodypack transmitters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTAA-Compliant\u003c\/strong\u003e — Meets Trade Agreements Act requirements, qualifying for federal, state, and local government procurement programs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Fit Replacement\u003c\/strong\u003e — Drop-in replacement for worn or damaged antenna elements with no transmitter modification required, minimizing system downtime.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eUA7-542-574-TA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e542–574 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eSAW (Surface Acoustic Wave) Filter Whip Antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eColor Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eBlack cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompatible Transmitters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eShure ADX1, AD1 bodypack transmitters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTAA-Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":44579926278380,"sku":"UA7-542-574-TA","price":59.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/shure-ua7-542-574-ta-filter-antenna-for-adx1-and-ad1-bodypack-transmitters-542-to-574-mhz-taa-compliant-creation-networks-11144.jpg?v=1757936648"},{"product_id":"shure-ua7-574-606-ta-filter-antenna-for-adx1-and-ad1-bodypack-transmitters-574-to-606-mhz-taa-compliant","title":"Shure UA7-574-606-TA Filter Antenna for ADX1 and AD1 Bodypack Transmitters (574 to 606 MHz) (TAA-Compliant)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure UA7-574-606-TA is a replacement SAW (Surface Acoustic Wave) filter whip antenna precision-tuned for the 574–606 MHz frequency range, designed for use with Shure ADX1 and AD1 bodypack transmitters. This TAA-compliant wireless antenna provides enhanced interference rejection compared to standard whip antennas, making it well-suited for high-density RF environments where spectral congestion is a concern. It serves as a direct-fit replacement for worn or damaged antenna elements in Axient Digital and Axient wireless deployments.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Shure UA7 SAW filter antenna delivers improved signal reliability when Shure PSM receivers are operating near wireless microphone transmitters, by filtering out-of-band interference at the antenna element itself. The blue-coded end cap allows technicians to immediately identify the 574–606 MHz band within a multi-channel wireless inventory — a practical advantage during rapid deployment in auditoriums, broadcast studios, or large-scale installed AV environments. As a direct-fit replacement for ADX1 and AD1 transmitters, it maintains verified compatibility with existing Shure Axient Digital wireless infrastructure. For adjacent frequency coverage, see also the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua7-542-574-ta-filter-antenna-for-adx1-and-ad1-bodypack-transmitters-542-to-574-mhz-taa-compliant\"\u003eShure UA7-542-574-TA (542–574 MHz)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAW Filter Technology\u003c\/strong\u003e — Surface Acoustic Wave filter provides greater interference rejection than standard whip antennas, protecting wireless signal integrity in congested RF environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e574–606 MHz Precision Tuning\u003c\/strong\u003e — Antenna is tuned specifically to the 574–606 MHz band for optimal radiation and reception characteristics within the compatible Shure transmitter operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor-Coded Identification\u003c\/strong\u003e — Blue end cap enables quick visual identification of the 574–606 MHz frequency range during multi-frequency wireless system deployment and maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADX1 and AD1 Compatibility\u003c\/strong\u003e — Designed as a verified direct replacement for Shure Axient Digital ADX1 and Axient AD1 bodypack transmitters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTAA-Compliant\u003c\/strong\u003e — Meets Trade Agreements Act requirements, qualifying for federal, state, and local government procurement programs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Fit Replacement\u003c\/strong\u003e — Drop-in replacement for worn or damaged antenna elements with no transmitter modification required, minimizing system downtime.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eUA7-574-606-TA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e574–606 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eSAW (Surface Acoustic Wave) Filter Whip Antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eColor Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eBlue cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompatible Transmitters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eShure ADX1, AD1 bodypack transmitters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTAA-Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":44579926737132,"sku":"UA7-574-606-TA","price":59.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/shure-ua7-574-606-ta-filter-antenna-for-adx1-and-ad1-bodypack-transmitters-574-to-606-mhz-taa-compliant-creation-networks-10783.jpg?v=1757936649"},{"product_id":"shure-ua844-swb-ta-wideband-antenna-distribution-system-470-to-960-mhz-taa-compliant","title":"Shure UA844+SWB-TA Wideband Antenna Distribution System (470 to 960 MHz) (TAA-Compliant)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Shure UA844+SWB-TA is a wideband UHF active antenna distribution system covering 470–960 MHz, designed to expand Shure wireless microphone systems by splitting one pair of antennas across up to five wireless receivers. As a TAA-compliant unit, it qualifies for government and institutional procurement. The standard configuration includes a full cable kit — ten 22-inch BNC cables and locking DC power cords for ULXD4 receivers — providing an out-of-box deployment solution without requiring additional cable procurement.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe UA844+SWB replaces the legacy UA844 series with active RF amplification to compensate for the insertion loss introduced by antenna splitting. A single unit provides four active receiver outputs plus a cascade port, enabling a second UA844+ to extend the configuration to a maximum of five units in a two-tier architecture — supporting up to 20 wireless receivers from a single antenna pair. The 1U rack-mount form factor with included rack hardware integrates directly into commercial AV, broadcast, and government system racks. Its 50 Ω BNC inputs and outputs maintain compatibility with standard Shure RF cabling. The 470–960 MHz frequency range covers all current Shure UHF bands, eliminating frequency-specific splitters in multi-band deployments. For the cable-light version suited to pre-wired rack environments, see also the \u003ca href=\"https:\/\/creationnetworks.net\/products\/shure-ua844-swblc-ta-wideband-antenna-distribution-system-and-no-antenna-cables-470-to-960-mhz-taa-compliant\"\u003eShure UA844+SWB\/LC-TA\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWideband 470–960 MHz Coverage\u003c\/strong\u003e — Spans all current Shure UHF wireless frequency bands, eliminating the need for frequency-specific distribution hardware in multi-band wireless system deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Antenna Splitter with RF Amplification\u003c\/strong\u003e — Four-way active splitter with built-in gain compensation maintains adequate signal level at each receiver output, preventing the signal degradation typical of passive splitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascade Port for Multi-Tier Expansion\u003c\/strong\u003e — Dedicated cascade output connects a second UA844+ unit, supporting up to a five-unit, two-tiered configuration for large-scale multi-receiver wireless installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power Distribution\u003c\/strong\u003e — Four DC power output ports supply 14–18 V DC to connected receivers, simplifying rack wiring in commercial AV and broadcast installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cable Kit Included\u003c\/strong\u003e — Ships with ten 22-inch BNC cables, two 6-foot BNC cables, four non-locking DC cords (QLX-D, SLX-D, BLX4R), and four locking DC cords (ULX-D), providing complete connectivity for an immediate deployment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1U Rack-Mount Form Factor\u003c\/strong\u003e — Standard 1U dimensions (45 x 483 x 172 mm) with included front-mounting antenna hardware and rack-mounting hardware for clean integration into commercial system racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTAA-Compliant\u003c\/strong\u003e — Meets Trade Agreements Act requirements for federal, state, and local government procurement programs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eUA844+SWB-TA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRF Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e470–960 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRF Outputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e4 active outputs + 1 cascade port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eGain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e−1 to +1 dB (input to any output, unused ports terminated in 50 Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eOutput Intercept Point\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e21 dBm typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eOutput Port Isolation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e30 dB typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eRF Connector Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eBias Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e15 V DC, 150 mA max (x2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e14–18 V DC (external power supply included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eDC Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e14–18 V DC (x4), 2.5 A total maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eDimensions (H x W x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e45 x 483 x 172 mm (1U rack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e1.62 kg (3.6 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e−18°C to 63°C (0°F to 145°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTAA-Compliant, CE, UKCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow many receivers can the UA844+SWB-TA support?\u003c\/strong\u003e\u003cbr\u003eA single unit supports four receivers via active RF outputs plus one cascade port. In a two-tier cascaded configuration with multiple UA844+ units, up to 20 receivers can be driven from a single antenna pair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the UA844+SWB-TA and the UA844+SWB\/LC-TA?\u003c\/strong\u003e\u003cbr\u003eBoth units are electronically identical. The UA844+SWB-TA ships with a full cable kit including ten 22-inch BNC cables and locking DC power cords for ULX-D receivers. The \/LC version ships with only two 22-inch BNC cables and no locking DC cords, suited for environments with existing cable infrastructure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the UA844+SWB-TA compatible with all current Shure UHF wireless systems?\u003c\/strong\u003e\u003cbr\u003eYes. The 470–960 MHz range covers all current Shure UHF wireless bands, including QLX-D, ULX-D, SLX-D, Axient Digital, and BLX-R.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it power active directional antennas like the Shure UA874?\u003c\/strong\u003e\u003cbr\u003eYes. Both RF input ports supply 15 V DC bias voltage (150 mA maximum each), which is compatible with active directional antennas such as the Shure UA874.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs installation support available for government or institutional deployments?\u003c\/strong\u003e\u003cbr\u003eShure provides full technical documentation and Creation Networks offers pre-sales support for complex wireless system integration projects, including TAA-compliant procurement.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":44579931881708,"sku":"UA844+SWB-TA","price":776.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/shure-ua844-swb-ta-wideband-antenna-distribution-system-470-to-960-mhz-taa-compliant-creation-networks-28400.jpg?v=1757936652"},{"product_id":"shure-mx405rlp-n-ta-5-gooseneck-mic-without-surface-mount-preamplifier-led-ring-no-capsule-taa-compliant","title":"Shure MX405RLP\/N-TA 5\" Gooseneck Mic without Surface Mount Preamplifier (LED Ring) (No Capsule) (TAA-Compliant)","description":"\u003cp\u003eThe Shure MX405 Gooseneck Microphone is a flexible speech microphone designed for applications in meeting rooms, lecture halls, houses-of-worship and anywhere a high-quality speech microphone is desired. This 5-inch gooseneck microphone features interchangeable capsules and a choice of a desk-mount preamplifier or direct flush-mounting into a table surface. The microphone is also available with an LED light ring. Wireless options enable full compatibility with the Shure SLX series wireless systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e*The TAA-compliant models are \u003cstrong data-mce-fragment=\"1\"\u003emade-to-order\u003c\/strong\u003e with a typical \u003cstrong data-mce-fragment=\"1\"\u003edelivery time of 2 to 4 weeks\u003c\/strong\u003e. The additional cost of producing separate model variations is reflected in higher pricing compared to standard SKUs.\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eFeatures \u003cbr\u003e\n\u003c\/h5\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"featureHeader_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"text_TAw0W35QK_ comfy_TAw0W35QK_ sizeTitle2_TAw0W35QK_ weightNormal_TAw0W35QK_ primary_i3MsQsqoe0\"\u003e\u003cstrong\u003eInterchangeable Capsules\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003eThe MX405's interchangeable capsules enable users to easily switch between cardioid and supercardioid polar patterns. The microphone is also available without a capsule.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"featureHeader_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"text_TAw0W35QK_ comfy_TAw0W35QK_ sizeTitle2_TAw0W35QK_ weightNormal_TAw0W35QK_ primary_i3MsQsqoe0\"\u003e\u003cstrong\u003eDesktop Preamplifier or Flush Mount Base\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003eThe microphone is available with a desktop stand \/ preamplifier or sold alone for flush mount installation into a desk or podium surface.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"feature_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"featureHeader_UbV5SNP5Eo\"\u003e\n\u003cdiv class=\"text_TAw0W35QK_ comfy_TAw0W35QK_ sizeTitle2_TAw0W35QK_ weightNormal_TAw0W35QK_ primary_i3MsQsqoe0\"\u003e\u003cstrong\u003eLED Ring\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003eThe MX405 is also available with an LED light ring for a quick read on microphone status.\u003c\/div\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"js-injected-html text_UbV5SNP5Eo\"\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003ctable data-selenium=\"specsItemGroupTable\" class=\"table_fDXOr6EpR9\"\u003e\n\u003ctbody\u003e\n\u003ctr data-selenium=\"specsItemGroupTableRow\" class=\"pair_KqJ3Q3GPKv keySpec_KqJ3Q3GPKv\"\u003e\n\u003ctd data-selenium=\"specsItemGroupTableColumnLabel\" class=\"label_KqJ3Q3GPKv\"\u003eElement Type\u003c\/td\u003e\n\u003ctd data-selenium=\"specsItemGroupTableColumnValue\" class=\"value_KqJ3Q3GPKv\"\u003e\n\u003cdiv class=\"expandableValue_KqJ3Q3GPKv\"\u003e\u003cspan\u003eCondenser\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-selenium=\"specsItemGroupTableRow\" class=\"pair_KqJ3Q3GPKv keySpec_KqJ3Q3GPKv\"\u003e\n\u003ctd data-selenium=\"specsItemGroupTableColumnLabel\" class=\"label_KqJ3Q3GPKv\"\u003eFrequency Range\u003c\/td\u003e\n\u003ctd data-selenium=\"specsItemGroupTableColumnValue\" class=\"value_KqJ3Q3GPKv\"\u003e\n\u003cdiv class=\"expandableValue_KqJ3Q3GPKv\"\u003e\u003cspan\u003e50 Hz to 17 kHz \u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-selenium=\"specsItemGroupTableRow\" class=\"pair_KqJ3Q3GPKv keySpec_KqJ3Q3GPKv\"\u003e\n\u003ctd data-selenium=\"specsItemGroupTableColumnLabel\" class=\"label_KqJ3Q3GPKv\"\u003eMaximum SPL\u003c\/td\u003e\n\u003ctd data-selenium=\"specsItemGroupTableColumnValue\" class=\"value_KqJ3Q3GPKv\"\u003e\n\u003cdiv class=\"expandableValue_KqJ3Q3GPKv\"\u003e\n\u003cspan\u003e\u003cb\u003eCardioid: \u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e124.2 dB SPL\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eSupercardioid: \u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e122.7 dB SPL\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan data-selenium=\"specsItemInfoIcon\" class=\"infoWrapper_KqJ3Q3GPKv\"\u003e\u003cspan aria-expanded=\"false\"\u003e\u003csvg width=\"14\" height=\"14\" class=\"bhIcon info_KqJ3Q3GPKv\"\u003e\u003cuse href=\"https:\/\/www.bhphotovideo.com\/#InfoLightIcon\"\u003e\u003c\/use\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-selenium=\"specsItemGroupTableRow\" class=\"pair_KqJ3Q3GPKv keySpec_KqJ3Q3GPKv\"\u003e\n\u003ctd data-selenium=\"specsItemGroupTableColumnLabel\" class=\"label_KqJ3Q3GPKv\"\u003eAnalog Output\u003c\/td\u003e\n\u003ctd data-selenium=\"specsItemGroupTableColumnValue\" class=\"value_KqJ3Q3GPKv\"\u003e\n\u003cdiv class=\"expandableValue_KqJ3Q3GPKv\"\u003e\u003cspan\u003e1x Proprietary\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-selenium=\"specsItemGroupTableRow\" class=\"pair_KqJ3Q3GPKv keySpec_KqJ3Q3GPKv\"\u003e\n\u003ctd data-selenium=\"specsItemGroupTableColumnLabel\" class=\"label_KqJ3Q3GPKv\"\u003ePower Sources\u003c\/td\u003e\n\u003ctd data-selenium=\"specsItemGroupTableColumnValue\" class=\"value_KqJ3Q3GPKv\"\u003e\n\u003cdiv class=\"expandableValue_KqJ3Q3GPKv\"\u003e\u003cspan\u003ePhantom Power\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":44655612952812,"sku":"MX405RLP\/N-TA","price":237.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_MX405RLP-N-TA.webp?v=1775877313"}],"url":"https:\/\/creationnetworks.net\/collections\/microphone-antennas.oembed?page=5","provider":"Creation Networks","version":"1.0","type":"link"}