{"title":"Meyer Sound Subwoofers \u0026 Low-Frequency Control","description":"\u003cp\u003eMeyer Sound self-powered subwoofers and low-frequency control elements for touring rigs, performing arts venues, houses of worship and permanent installations. Every cabinet carries its own amplification and processing, so there is no separate amp rack to size against driver loads and no risk of mismatching power to the cabinet.\u003c\/p\u003e\n\n\u003ch2\u003eLFC low-frequency control elements\u003c\/h2\u003e\n\u003cp\u003eThe LFC series — 750-LFC, 900-LFC, 1100-LFC, 1800-LFC and 2100-LFC — is built to fly with the line arrays rather than sit on the deck. Selection follows required output and how the low end is deployed: flown behind or beside the mains for even coverage front to back, or ground-stacked in an array where the room and the rigging allow. Grid kits, caster frames, endframe rigging kits, pole kits and pullover covers are stocked alongside the cabinets, and the grid determines what array geometry is achievable, so it belongs on the same purchase order as the subwoofer.\u003c\/p\u003e\n\n\u003ch2\u003eUSW installed subwoofers\u003c\/h2\u003e\n\u003cp\u003eThe USW range covers permanent installation: USW-112XP, USW-121P and USW-210P in standard, weather-protected and no-grille builds with Phoenix connector options. These are specified where the subwoofer is built into the architecture and will not move again — a sanctuary, a lecture hall, a covered outdoor space. The weather-protected variants are for covered exterior and high-humidity locations, and the connector scheme should stay consistent with the rest of the installed system.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifying low frequency\u003c\/h2\u003e\n\u003cp\u003eSubwoofer placement determines whether low end is even across the seating or lumpy — a correctly specified cabinet in the wrong position still produces a bad room. Array configuration, flown versus ground-stacked, and the interaction between multiple subs all get modeled before anything is ordered. Creation Networks handles coverage prediction, rigging plans, installation and commissioning. Call 888-230-3661 or email sales@creationnetworks.net.\u003c\/p\u003e","products":[{"product_id":"meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer","title":"Meyer Sound 750-LFC 3100W 15-inch Powered Subwoofer - 09.271.001.10","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 750-LFC is a very compact self-powered low-frequency control element built for scalable low-frequency reinforcement in portable rigs and fixed installations of any size. Driven by a single 15-inch long-excursion driver and an onboard class D amplifier, it delivers high continuous output with extremely low distortion in a lightweight cabinet. It is a natural low-frequency complement for Meyer Sound LINA, LEOPARD, and ULTRA Series loudspeaker systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-creation-networks-13408.webp?v=1757940861\" alt=\"Meyer Sound 750-LFC 3100W 15-inch powered subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe 750-LFC offers the same sonic linearity as the larger 900-LFC in a smaller, lighter enclosure that suits portable and corporate applications. Inside, a two-channel open-loop class D amplifier rated at 3100 W peak resides in a single field-replaceable module containing the amplifier and control circuitry. The integral pole mount supports placing one or two LINA loudspeakers on top using the MUB-MINA\/LINA U bracket or MYA-MINA\/LINA yoke, or pairing with ULTRA Series loudspeakers. When equipped with the optional MRK-750 rigging kit, the captive GuideALinks allow flying from the MG-MINA\/LINA grid without a transition frame, with subwoofer-array splay angles of 0, 1.5, 3.25, or 4.75 degrees. For a larger 18-inch low-frequency element consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-and-rigging-frame\"\u003eMeyer Sound 900-LFC subwoofer\u003c\/a\u003e, or the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms\"\u003eMeyer Sound VLFC arrayable subwoofer\u003c\/a\u003e for very low frequencies. Pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 15-inch cone driver with 2 ohm nominal impedance produces high-output, low-distortion low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact, Lightweight Cabinet\u003c\/strong\u003e — At 89 lb without rigging, the enclosure suits portable and corporate deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM measure below 0.02 percent for exceptional linearity and transient reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole mount supports LINA loudspeakers above or pairing with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArray Compatible\u003c\/strong\u003e — With the optional MRK-750 rigging kit it flies in regular and cardioid arrays from the MG-MINA\/LINA grid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Ready\u003c\/strong\u003e — An optional RMS module reports all amplifier operating parameters to a Mac or Windows host computer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides compact low-frequency reinforcement for worship spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference Room\u003c\/strong\u003e — Adds controlled low end for high-quality presentation and media playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports portable low-frequency support across varied events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for theatrical and presentation systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e37 Hz – 110 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e130.5 dB with crest factor \u0026gt;9 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 21.80 in x H 20.30 in x D 20.88 in (554 x 515 x 530 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e89 lb (40.3 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 750-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b V-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 750-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe V-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 15-inch long-excursion driver in a very compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver in a larger cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a cardioid-arranged multi-driver design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt supports optional Meyer Sound RMS remote monitoring of amplifier parameters.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and LA Network Manager.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and R1 software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem Integration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt integrates directly with LINA arrays using the shared MG-MINA\/LINA grid.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt integrates within the L-Acoustics Kara and Kiva ecosystem.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt integrates within the d\u0026amp;b V-Series ecosystem.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhich Meyer Sound systems does the 750-LFC complement?\u003c\/strong\u003e It is designed as a low-frequency complement for LINA, LEOPARD, and ULTRA Series loudspeakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I mount loudspeakers on top of it?\u003c\/strong\u003e Yes. The integral pole mount supports one or two LINA loudspeakers using the MUB-MINA\/LINA U bracket or MYA-MINA\/LINA yoke, or ULTRA Series loudspeakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require an external amplifier?\u003c\/strong\u003e No. The 750-LFC is self-powered and can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it monitored?\u003c\/strong\u003e An optional RMS module reports all amplifier operating parameters to a Mac or Windows host computer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45859917562092,"sku":"09.271.001.10","price":7530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-creation-networks-13408.webp?v=1757940861"},{"product_id":"meyer-sound-leopard-mg-leopard-900-lfc-grid-kit","title":"Meyer Sound LEOPARD LFC Grid Kit - 40.243.080.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD LFC Grid Kit is the MG-LEOPARD\/900 multipurpose grid, the primary flying grid for LEOPARD and 900-LFC arrays. It provides the top-of-array pickup structure for flying or ground-stacking mixed arrays of LEOPARD cabinets and 900-LFC low-frequency elements without transition hardware. The grid is a core rigging component for installed and touring LEOPARD systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-lfc-grid-kit-creation-networks-62872.jpg?v=1757941278\" alt=\"Meyer Sound LEOPARD LFC grid kit MG-LEOPARD\/900 multipurpose grid\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MG-LEOPARD\/900 grid flies up to 23 LEOPARD cabinets with a 5:1 safety factor and BGV C1, with some angle restrictions, and supports mixed arrays of LEOPARD and 900-LFC cabinets flown or ground-stacked without transition hardware. It offers multiple and single-center pickup points plus attachment points for brackets and adapters such as lasers and inclinometers. Always use Meyer Sound's MAPP System Design Tool to verify rigging load ratings. It is used with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e. Additional Meyer Sound rigging hardware is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 23 LEOPARD Cabinets\u003c\/strong\u003e — The grid flies up to 23 LEOPARD cabinets at a 5:1 safety factor and BGV C1, with some angle restrictions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed LEOPARD and 900-LFC Arrays\u003c\/strong\u003e — It supports combined LEOPARD and 900-LFC arrays flown or ground-stacked without transition hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Pickup Points\u003c\/strong\u003e — Multiple and single-center pickup points provide flexible trim and aim geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory Attachment Points\u003c\/strong\u003e — Attachment points accommodate brackets and adapters for lasers and inclinometers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAPP-Verified Loading\u003c\/strong\u003e — Rigging load ratings should be confirmed in Meyer Sound's MAPP System Design Tool before flying.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMultipurpose flying grid rigging accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFlies LEOPARD and 900-LFC arrays without transition hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to 23 LEOPARD cabinets at 5:1 safety factor and BGV C1, with angle restrictions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LEOPARD and 900-LFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.243.080.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918622220524,"sku":"40.243.080.01","price":5240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-lfc-grid-kit-creation-networks-62872.jpg?v=1757941278"},{"product_id":"meyer-sound-2100-lfc-21-active-subwoofer-1200w-flyable","title":"Meyer Sound 2100-LFC 21\" Active Subwoofer, 1200W, Flyable - 09.328.001.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound 2100-LFC is a self-powered 21-inch low-frequency control element engineered for high-output, low-distortion bass in large-format reinforcement systems. This flyable active subwoofer delivers deep low-frequency extension with telemetry monitoring and weather-resistant connectors for touring and installed applications. It is well suited to auditoriums, arenas, houses of worship, and large multi-purpose venues that require precise, powerful sub-bass. As a low-frequency control element, the 2100-LFC integrates with Meyer Sound line array systems under a unified processing platform.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-2100-lfc-21-active-subwoofer-1200w-flyable-creation-networks-11850.webp?v=1757941309\" alt=\"Meyer Sound 2100-LFC 21-inch active flyable subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2100-LFC houses a single 21-inch long-excursion cone driver with a 4-ohm nominal impedance and delivers an operating frequency range of 30 Hz to 125 Hz. As a low-frequency control element rather than a simple subwoofer, it provides phase-aligned, controlled output that integrates with Meyer Sound line array systems. The cabinet draws a maximum long-term continuous power of 1200 W with 2400 W burst capability and supports both analog audio over a Neutrik XLR 3-pin TOP connector and AVB Milan-certified digital audio over a Neutrik etherCON TOP connector. End frames with captive GuideALinks allow the 2100-LFC to be flown or ground-stacked, and an IP55 ingress protection rating with TOP-terminated cabling supports outdoor use. Loudspeaker telemetry is transmitted over Ethernet for monitoring in Meyer Sound software. Compare the 2100-LFC with the compact \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered subwoofer\u003c\/a\u003e for smaller systems, or pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-panther-l-2-200-watt-12-inch-active-line-array-speaker\"\u003eMeyer Sound PANTHER line array loudspeaker\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e for full-range output.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e21-Inch Long-Excursion Driver\u003c\/strong\u003e — A single 21-inch long-excursion cone driver with 4-ohm nominal impedance delivers high-output, deep low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Frequency Control Element\u003c\/strong\u003e — Provides phase-aligned, controlled bass output rather than uncontrolled subwoofer energy for predictable system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard amplification draws up to 1200 W continuous with 2400 W burst power, eliminating external amplifier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog and Digital Inputs\u003c\/strong\u003e — Accepts analog audio via Neutrik XLR 3-pin TOP and AVB Milan-certified digital audio via Neutrik etherCON TOP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlyable and Ground-Stackable\u003c\/strong\u003e — End frames with captive GuideALinks secured by quick-release pins support flown and ground-stacked configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP55 Weather Resistance\u003c\/strong\u003e — An IP55 ingress protection rating with TOP-terminated cabling supports outdoor and semi-exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelemetry Monitoring\u003c\/strong\u003e — Loudspeaker telemetry is transmitted over the Ethernet port for real-time monitoring in Meyer Sound software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360-Degree Coverage\u003c\/strong\u003e — A single unit provides omnidirectional low-frequency coverage that can be configured into directional arrays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Delivers controlled, high-output sub-bass for theaters and performance halls that demand even low-frequency coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides deep, intelligible low-frequency support for contemporary worship music and spoken word.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Flyable and ground-stackable configurations adapt to large flexible venues hosting varied program material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Hands Room\u003c\/strong\u003e — Adds powerful, controlled low end to large corporate gathering spaces and presentation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Phase-aligned low-frequency output supports reference-grade reproduction in production environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAES75 Maximum Linear Sound Levels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e139.1 dBZpk, 129.2 dBZ (RMS input +6.0 dBV analog, -17.8 dBFS digital)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360° (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Transducer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 21-inch long-excursion cone driver; 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMax Long-Term Continuous Power (\u0026gt;10 sec)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e1200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eBurst Power (\u0026lt;1 sec)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e2400 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik powerCON TRUE1 TOP; 200–240 V AC, 50 or 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAnalog Audio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik XLR 3-pin TOP female input with male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDigital Audio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik etherCON TOP; AVB, Milan Certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIP55 when connected to TOP-terminated cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e235 lbs (106.6 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnd frames with captive GuideALinks secured with quick-release pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 2100-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS28\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b audiotechnik SL-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 2100-LFC is self-powered with onboard amplification and processing in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS28 is externally amplified and requires LA-series amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe SL-SUB is externally amplified and driven by d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 2100-LFC uses a single 21-inch long-excursion driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS28 uses dual 18-inch drivers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe SL-SUB uses a multi-driver cardioid configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 2100-LFC operates from 30 Hz to 125 Hz.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS28 covers a comparable low-frequency band published by L-Acoustics.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe SL-SUB covers a comparable low-frequency band published by d\u0026amp;b.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDigital Networking\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 2100-LFC accepts AVB Milan-certified digital audio over etherCON.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS28 receives audio through its amplified controller rather than onboard networking.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe SL-SUB receives audio through its amplifier with optional networking.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 2100-LFC is rated IP55 with TOP-terminated cabling.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS28 offers weather-resistant variants for outdoor use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe SL-SUB offers outdoor protection options.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 2100-LFC transmits loudspeaker telemetry over Ethernet for software monitoring.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS28 is monitored through L-Acoustics amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe SL-SUB is monitored through d\u0026amp;b amplifiers and software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 2100-LFC self-powered?\u003c\/strong\u003e\u003cbr\u003eYes. The 2100-LFC has onboard amplification and processing, drawing up to 1200 W continuous and 2400 W burst, so no external amplifier racks are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 2100-LFC be flown?\u003c\/strong\u003e\u003cbr\u003eYes. It uses end frames with captive GuideALinks secured by quick-release pins, allowing it to be flown or ground-stacked.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat audio inputs does the 2100-LFC support?\u003c\/strong\u003e\u003cbr\u003eIt accepts analog audio over a Neutrik XLR 3-pin TOP connector and AVB Milan-certified digital audio over a Neutrik etherCON TOP connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 2100-LFC be used outdoors?\u003c\/strong\u003e\u003cbr\u003eIt carries an IP55 ingress protection rating when connected to cables terminated with Neutrik TOP connectors, supporting outdoor and semi-exposed installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the 2100-LFC integrated and processed?\u003c\/strong\u003e\u003cbr\u003eAs a low-frequency control element it integrates with Meyer Sound line array systems and is driven and monitored through Meyer Sound's processing platform and software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 2100-LFC covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eIt is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923729998060,"sku":"09.328.001.01","price":20380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-2100-lfc-21-active-subwoofer-1200w-flyable-creation-networks-11850.webp?v=1757941309"},{"product_id":"meyer-sound-mcf-2100-lfc-caster-frame-kit","title":"Meyer Sound MCF-2100-LFC Caster Frame Kit - 40.328.200.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MCF-2100-LFC Caster Frame Kit is a transport accessory for moving 2100-LFC low-frequency control elements. This 2100-LFC caster frame attaches to the cabinet so crews can roll and stage the heavy subwoofer for faster load-in and load-out. It is designed specifically for the Meyer Sound 2100-LFC subwoofer.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mcf-2100-lfc-caster-frame-kit-creation-networks-59924.webp?v=1757941311\" alt=\"Meyer Sound MCF-2100-LFC caster frame kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MCF-2100-LFC caster frame mounts to the 2100-LFC cabinet and provides wheeled transport for the 235 lb subwoofer, making it easier to move, stage, and stack the cabinet during setup and teardown. It is purpose-built for the 2100-LFC and supports the cabinet's rigging workflow in touring and installed applications. Pair this caster frame with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-2100-lfc-21-active-subwoofer-1200w-flyable\"\u003eMeyer Sound 2100-LFC active subwoofer\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheeled Transport\u003c\/strong\u003e — Provides caster-mounted mobility for the 235 lb 2100-LFC cabinet during setup and teardown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Cabinet Mounting\u003c\/strong\u003e — Attaches to the 2100-LFC cabinet for secure rolling transport and staging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaster Load-In and Load-Out\u003c\/strong\u003e — Simplifies moving and positioning the heavy subwoofer in touring and installed workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect 2100-LFC Compatibility\u003c\/strong\u003e — Purpose-built for the Meyer Sound 2100-LFC low-frequency control element.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMCF-2100-LFC Caster Frame Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound 2100-LFC subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaster-mounted transport for the 2100-LFC cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923863724268,"sku":"40.328.200.01","price":2390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mcf-2100-lfc-caster-frame-kit-creation-networks-59924.webp?v=1757941311"},{"product_id":"meyer-sound-mtg-2100-lfc-top-grid","title":"Meyer Sound MTG-2100-LFC Top Grid - 40.328.400.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MTG-2100-LFC Top Grid is the flying grid for 2100-LFC low-frequency control element arrays. This 2100-LFC top grid provides the upper rigging interface for suspending flown subwoofer arrays from overhead points. It is designed specifically for the Meyer Sound 2100-LFC subwoofer.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mtg-2100-lfc-top-grid-creation-networks-41840.webp?v=1757941312\" alt=\"Meyer Sound MTG-2100-LFC top grid\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MTG-2100-LFC top grid serves as the upper rigging interface for flown arrays of 2100-LFC cabinets, connecting to the cabinet end frames and captive GuideALinks for overhead suspension. It supports the assembly of flown low-frequency arrays in touring and installed systems. Always use Meyer Sound's MAPP System Design Tool to verify rigging load ratings. Pair this top grid with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-2100-lfc-21-active-subwoofer-1200w-flyable\"\u003eMeyer Sound 2100-LFC active subwoofer\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlown Array Interface\u003c\/strong\u003e — Provides the upper rigging point for suspending flown 2100-LFC arrays from overhead structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect GuideALink Connection\u003c\/strong\u003e — Connects to the 2100-LFC end frames and captive GuideALinks for secure assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouring and Install Ready\u003c\/strong\u003e — Supports flown low-frequency array assembly in both touring and permanent installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect 2100-LFC Compatibility\u003c\/strong\u003e — Purpose-built for the Meyer Sound 2100-LFC low-frequency control element.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMTG-2100-LFC Top Grid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound 2100-LFC subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUpper rigging grid for flown 2100-LFC arrays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923868508396,"sku":"40.328.400.01","price":6880.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mtg-2100-lfc-top-grid-creation-networks-41840.webp?v=1757941312"},{"product_id":"meyer-sound-2100-lfc-2-high-pullover-spkr-cover","title":"Meyer Sound 2100-LFC 2 High Pullover Speaker Cover - 79.328.111.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound 2100-LFC 2 High Pullover Speaker Cover is a protective cover for a stack of two 2100-LFC low-frequency control elements. This 2100-LFC speaker cover shields a two-cabinet block from dust and abrasion during transport and storage. It is sized specifically for the Meyer Sound 2100-LFC subwoofer.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-2100-lfc-2-high-pullover-speaker-cover-creation-networks-37532.webp?v=1757941313\" alt=\"Meyer Sound 2100-LFC 2 high pullover speaker cover\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis pullover cover is sized for a stack of two 2100-LFC cabinets, protecting the loudspeakers from dust and abrasion during transport and storage to keep the array road ready. It pairs with the 2100-LFC caster frame for staging and rolling stacked cabinets. Use this cover with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-2100-lfc-21-active-subwoofer-1200w-flyable\"\u003eMeyer Sound 2100-LFC active subwoofer\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Two-Cabinet Stacks\u003c\/strong\u003e — Sized for a stack of two 2100-LFC cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport and Storage Protection\u003c\/strong\u003e — Shields cabinets from dust and abrasion during transport and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster Frame Compatible\u003c\/strong\u003e — Designed to cover a stack staged on the 2100-LFC caster frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect 2100-LFC Compatibility\u003c\/strong\u003e — Purpose-built for the Meyer Sound 2100-LFC low-frequency control element.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound 2100-LFC subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eStack of two cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923877257452,"sku":"79.328.111.02","price":1490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-2100-lfc-2-high-pullover-speaker-cover-creation-networks-37532.webp?v=1757941313"},{"product_id":"meyer-sound-2100-lfc-3-high-pullover-spkr-cover","title":"Meyer Sound 2100-LFC 3 High Pullover Speaker Cover - 79.328.111.03","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound 2100-LFC 3 High Pullover Speaker Cover is a protective cover for a stack of three 2100-LFC low-frequency control elements. This 2100-LFC speaker cover shields a three-cabinet block from dust and abrasion during transport and storage. It is sized specifically for the Meyer Sound 2100-LFC subwoofer.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-2100-lfc-3-high-pullover-speaker-cover-creation-networks-88901.webp?v=1757941314\" alt=\"Meyer Sound 2100-LFC 3 high pullover speaker cover\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis pullover cover is sized for a stack of three 2100-LFC cabinets, protecting the loudspeakers from dust and abrasion during transport and storage to keep the array road ready. It pairs with the 2100-LFC caster frame for staging and rolling stacked cabinets. Use this cover with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-2100-lfc-21-active-subwoofer-1200w-flyable\"\u003eMeyer Sound 2100-LFC active subwoofer\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Three-Cabinet Stacks\u003c\/strong\u003e — Sized for a stack of three 2100-LFC cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport and Storage Protection\u003c\/strong\u003e — Shields cabinets from dust and abrasion during transport and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster Frame Compatible\u003c\/strong\u003e — Designed to cover a stack staged on the 2100-LFC caster frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect 2100-LFC Compatibility\u003c\/strong\u003e — Purpose-built for the Meyer Sound 2100-LFC low-frequency control element.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound 2100-LFC subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eStack of three cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923881615596,"sku":"79.328.111.03","price":1820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-2100-lfc-3-high-pullover-speaker-cover-creation-networks-88901.webp?v=1757941314"},{"product_id":"meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms","title":"Meyer Sound VLFC 2x18\" Active Arrayable Subwoofer with Collapsible Rain Hood, RMS - 09.240.001.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound VLFC Very Low Frequency Control Element is a self-powered infrasonic subwoofer engineered to reproduce the lowest octave of low-frequency content at high continuous output with very low distortion. Operating from 13 Hz to 35 Hz, this dual 18-inch arrayable subwoofer extends a system's response below the 20 Hz floor of conventional touring subwoofers, making it a specialist low frequency control element for large-scale live sound, immersive audio, and themed-entertainment installations. Because amplification, signal processing, and RMS remote monitoring are integrated, the VLFC deploys without external amplifier racks or crossover calibration.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms-creation-networks-10009.webp?v=1757941315\" alt=\"Meyer Sound VLFC 2x18-inch self-powered infrasonic arrayable subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe VLFC houses two 18-inch long-excursion, low-resonance cone drivers in a premium multi-ply birch enclosure, powered by a two-channel Class AB\/H amplifier with complementary MOSFET output stages rated at 5,600 W peak. By concentrating energy into the narrow 13–30 Hz band, this self-powered arrayable subwoofer generates the extreme variations in air pressure required for sub-bass effects and tactile low-end that standard subwoofers cannot deliver. It is designed to complement Meyer Sound's \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003e750-LFC\u003c\/a\u003e and larger LFC elements in the lowest octaves, and integrates with full-range systems such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-panther-l-2-200-watt-12-inch-active-line-array-speaker\"\u003ePANTHER line array\u003c\/a\u003e. For commercial cinema, the VLFC pairs with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-x-1100c-high-power-cinema-subwoofer\"\u003eX-1100C cinema subwoofer\u003c\/a\u003e to achieve full SMPTE-compliant subsonic extension. System design is supported in MAPP 3D, and tuning is managed through Galileo GALAXY processing, while the included RMS module reports operating parameters to a host computer for commercial deployment and long-term monitoring.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfrasonic 13–35 Hz operating range\u003c\/strong\u003e — Reproduces sub-audible content below the limit of conventional subwoofers for tactile, full-bandwidth low end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-powered design\u003c\/strong\u003e — Integrated amplifier and processing remove the need for external amp racks, long speaker runs, or crossover calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 18-inch low-resonance drivers\u003c\/strong\u003e — Two long-excursion cone drivers deliver high continuous output with very low distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5,600 W peak Class AB\/H amplification\u003c\/strong\u003e — Complementary MOSFET output stages maintain clean transients at extreme operating levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS remote monitoring standard\u003c\/strong\u003e — Reports amplifier and driver parameters to Compass software for proactive system management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArrayable, 360° coverage\u003c\/strong\u003e — Single-unit omnidirectional output that can be configured into directional low-frequency arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalileo GALAXY and MAPP 3D support\u003c\/strong\u003e — Predictable system design and processing integration with other Meyer Sound loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Adds subsonic extension for large-scale performance and presentation spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Delivers controlled, high-output low end for large worship auditoriums and broadcast-grade services.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports immersive and concert reproduction in flexible large-format venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast studio\u003c\/strong\u003e — Provides reference low-frequency reproduction for effects and post-production monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e13–35 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e13–30 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e13–30 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e125.5 dB (M-noise, crest factor \u0026gt;10.5 dB); 125.5 dB (pink noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360° (single unit); varies with array configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTransducers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 18\" long-excursion low-resonance cone drivers; 8 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e2-channel Class AB\/H bridged, complementary MOSFET; 5,600 W peak; THD\/IM\/TIM \u0026lt;0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; XLR 5-pin female input with male loop output (XLR 3-pin available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 32 input; 208–235 V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRMS remote monitoring module (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions (W×H×D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e54.65 × 20.48 × 33 in (1388 × 520 × 838 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e298 lb (135.2 kg) without rigging; 332 lb (150.7 kg) with rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eCriterion\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eMeyer Sound VLFC\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eL-Acoustics KS28\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003ed\u0026amp;b audiotechnik SL-SUB\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow-frequency extension\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eReaches 13 Hz, purpose-built for infrasonic reproduction below the audible range.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRated to roughly 25 Hz (-10 dB), aimed at standard sub-bass rather than infrasonic content.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eReaches roughly 30 Hz, or about 30 Hz in INFRA mode; does not target the sub-20 Hz octave.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSelf-powered with onboard 5,600 W peak amplifier and DSP.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires external LA12X amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires external d\u0026amp;b D80 amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDriver configuration\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 18\" low-resonance long-excursion drivers tuned for sub-audible output.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 18\" drivers tuned for full-output sub-bass.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThree 21\" drivers in a front\/rear cardioid arrangement.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOnboard monitoring\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRMS telemetry standard, reporting amplifier and driver health to Compass.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring handled at the external amplifier\/network layer.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring handled through d\u0026amp;b amplifiers and network.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePrimary role\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDedicated low frequency control element for subsonic extension of an existing PA.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMain touring sub-bass for the low end of a line-array system.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCardioid touring subwoofer for directional sub-bass control.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the VLFC require an external amplifier?\u003c\/strong\u003e\u003cbr\u003eNo. The VLFC is self-powered, with a two-channel Class AB\/H amplifier, DSP, and RMS monitoring integrated into the cabinet. It requires only AC power (208–235 V AC via powerCON 32) and a balanced audio feed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it integrate into an existing Meyer Sound system?\u003c\/strong\u003e\u003cbr\u003eThe VLFC is designed to extend the low end of full-range and LFC-based systems. It is tuned and time-aligned in Galileo GALAXY processing and modeled in MAPP 3D, and pairs with LFC subwoofers such as the 750-LFC and with PANTHER or LEOPARD arrays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is required for installation and rigging?\u003c\/strong\u003e\u003cbr\u003eThe cabinet ships with integrated rigging hardware and supports ground-stacked or flown low-frequency arrays. Because of its 298–332 lb weight, structural rigging review and Meyer Sound QuickFly hardware are recommended for flown deployments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power distribution does it use for larger systems?\u003c\/strong\u003e\u003cbr\u003eMultiple VLFC and 1100-LFC units can be powered and signal-fed through Meyer Sound MDM-5000 distribution modules, which route AC power, balanced audio, and RMS signals to the loudspeakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThe VLFC is covered under Meyer Sound's standard product warranty. \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003eContact Creation Networks\u003c\/a\u003e for current warranty terms and commercial AV support.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923890462956,"sku":"09.240.001.02","price":36280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms-creation-networks-10009.webp?v=1757941315"},{"product_id":"meyer-sound-mtg-1100-lfc-top-grid","title":"Meyer Sound MTG-1100-LFC Top Grid - 40.220.030.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MTG-1100-LFC Top Grid is the flying grid for 1100-LFC low-frequency control element arrays. This 1100-LFC top grid provides the upper rigging interface for suspending flown subwoofer arrays from overhead points. It is designed specifically for the Meyer Sound 1100-LFC subwoofer.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mtg-1100-lfc-top-grid-creation-networks-63274.jpg?v=1757941317\" alt=\"Meyer Sound MTG-1100-LFC top grid\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MTG-1100-LFC top grid serves as the upper rigging interface for flown arrays of 1100-LFC cabinets, connecting to the cabinet rigging hardware for overhead suspension. It supports the assembly of flown low-frequency arrays in touring and installed systems. Always use Meyer Sound's MAPP System Design Tool to verify rigging load ratings. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks for compatible low-frequency systems and accessories.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlown Array Interface\u003c\/strong\u003e — Provides the upper rigging point for suspending flown 1100-LFC arrays from overhead structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Rigging Connection\u003c\/strong\u003e — Connects to the 1100-LFC cabinet rigging hardware for secure array assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouring and Install Ready\u003c\/strong\u003e — Supports flown low-frequency array assembly in both touring and permanent installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect 1100-LFC Compatibility\u003c\/strong\u003e — Purpose-built for the Meyer Sound 1100-LFC low-frequency control element.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMTG-1100-LFC Top Grid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound 1100-LFC subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUpper rigging grid for flown 1100-LFC arrays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923905798380,"sku":"40.220.030.01","price":7160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mtg-1100-lfc-top-grid-creation-networks-63274.jpg?v=1757941317"},{"product_id":"meyer-sound-mcf-1100-lfc-caster-frame","title":"Meyer Sound MCF-1100-LFC Caster Frame - 40.220.039.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MCF-1100-LFC Caster Frame is a transport accessory for moving 1100-LFC low-frequency control elements. This 1100-LFC caster frame attaches to the cabinet so crews can roll and stage the subwoofer for faster load-in and load-out. It is designed specifically for the Meyer Sound 1100-LFC subwoofer.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mcf-1100-lfc-caster-frame-creation-networks-63780.jpg?v=1757941318\" alt=\"Meyer Sound MCF-1100-LFC caster frame\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MCF-1100-LFC caster frame mounts to the 1100-LFC cabinet and provides wheeled transport, making it easier to move, stage, and stack the subwoofer during setup and teardown. It is purpose-built for the 1100-LFC and supports the cabinet's rigging workflow in touring and installed applications. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks for compatible low-frequency systems and accessories.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheeled Transport\u003c\/strong\u003e — Provides caster-mounted mobility for the 1100-LFC cabinet during setup and teardown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Cabinet Mounting\u003c\/strong\u003e — Attaches to the 1100-LFC cabinet for secure rolling transport and staging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaster Load-In and Load-Out\u003c\/strong\u003e — Simplifies moving and positioning the subwoofer in touring and installed workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect 1100-LFC Compatibility\u003c\/strong\u003e — Purpose-built for the Meyer Sound 1100-LFC low-frequency control element.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMCF-1100-LFC Caster Frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound 1100-LFC subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaster-mounted transport for the 1100-LFC cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923909763308,"sku":"40.220.039.01","price":2960.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mcf-1100-lfc-caster-frame-creation-networks-63780.jpg?v=1757941318"},{"product_id":"meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-and-rigging-frame","title":"Meyer Sound 900-LFC 3100W Powered Subwoofer with 18\" LF Driver and Rigging Frame - 09.246.201.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 900-LFC is a compact self-powered low-frequency control element built for scalable low-frequency reinforcement in touring rigs and fixed installations of any size. This configuration ships with the optional QuickFly rigging frame, making it ready for flown, ground-stacked, and cardioid subwoofer arrays. Driven by a single 18-inch long-excursion driver and an onboard class D amplifier, it delivers high continuous output with extremely low distortion. It is a natural low-frequency complement for Meyer Sound LEOPARD line array systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-no-rig-with-weather-protection-creation-networks-64870.jpg?v=1757941335\" alt=\"Meyer Sound 900-LFC 3100W powered subwoofer with 18-inch LF driver and rigging frame\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis 900-LFC variant is supplied with the integrated rigging frame, whose captive GuideALinks enable flying from the MG-LEOPARD\/900 multipurpose grid in LEOPARD arrays without a transition frame. The same end frames support ground-stacked configurations with uptilt or downtilt, and allow standalone subwoofer arrays at splay angles of 0, 1.25, 2.5, 3.75, or 5 degrees. The cabinet houses a two-channel, open-loop class D amplifier rated at 3100 W peak with a field-replaceable amplifier and control module. An integral pole-mount receptacle pairs the unit with ULTRA Series loudspeakers, and RMS remote monitoring reports operating parameters to a host computer. For larger formats consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms\"\u003eMeyer Sound VLFC very-low-frequency control element\u003c\/a\u003e, and for the compatible array system the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e for matching processing and accessories.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 18-inch cone driver with 2 ohm nominal impedance reproduces low frequencies with high output and clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module, simplifying setup and service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly Rigging Frame\u003c\/strong\u003e — Captive GuideALinks allow direct flying from the MG-LEOPARD\/900 grid and support ground-stacked and cardioid arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Splay Angles\u003c\/strong\u003e — Subwoofer arrays can be configured at 0, 1.25, 2.5, 3.75, or 5 degrees for tailored low-frequency coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM measure below 0.02 percent for exceptional linearity and transient reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Remote Monitoring\u003c\/strong\u003e — A two-conductor twisted-pair network reports all amplifier operating parameters to a Mac or Windows host computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole-mount receptacle pairs the subwoofer with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides scalable low-frequency reinforcement for worship spaces of any size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for theatrical and presentation sound systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports flown or ground-stacked low end for flexible event configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Delivers linear, low-distortion low frequencies for monitoring and production audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e32 Hz – 115 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e133 dB with crest factor \u0026gt;10 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 18-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions with Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 27.47 in x H 24.43 in x D 24.89 in (698 x 621 x 632 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight with Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e159 lb (72.1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 900-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b SL-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 900-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe SL-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 18-inch long-excursion driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses dual 21-inch drivers in a larger cabinet.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt includes Meyer Sound RMS remote monitoring of all amplifier parameters.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and LA Network Manager.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and R1 software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem Integration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt integrates directly with LEOPARD arrays using the shared MG-LEOPARD\/900 grid.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt integrates within the L-Acoustics K and Kara array ecosystem.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt integrates within the d\u0026amp;b SL-Series ecosystem.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs the 900-LFC compatible with LEOPARD line arrays?\u003c\/strong\u003e Yes. When equipped with rigging, the captive GuideALinks allow it to fly from the MG-LEOPARD\/900 multipurpose grid in LEOPARD arrays without a transition frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this configuration include rigging?\u003c\/strong\u003e Yes. This version ships with the QuickFly rigging frame for flown, ground-stacked, and cardioid configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat processing and amplification does it need?\u003c\/strong\u003e The 900-LFC is self-powered, so no external amplifier is required. It can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the system monitored?\u003c\/strong\u003e The unit includes Meyer Sound RMS, reporting all amplifier operating parameters to a Mac or Windows host computer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923917922540,"sku":"09.246.201.02","price":13990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-no-rig-with-weather-protection-creation-networks-64870.jpg?v=1757941335"},{"product_id":"meyer-sound-900-lfc-us-w-p-qclp-3p-w-rig-38mm","title":"Meyer Sound 900-LFC 3100W Powered Subwoofer with QCLP and Rigging Frame (with Weather Protection) - 09.246.201.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 900-LFC is a compact self-powered low-frequency control element engineered for scalable low-frequency reinforcement across touring and fixed installations. This configuration combines the QuickFly rigging frame with QCLP weather protection, making it suited to outdoor and semi-exposed deployments where flown or ground-stacked subwoofer arrays are required. A single 18-inch long-excursion driver and an onboard class D amplifier deliver high continuous output with extremely low distortion. It serves as a low-frequency complement for Meyer Sound LEOPARD line array systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-no-rig-with-weather-protection-creation-networks-64870.jpg?v=1757941335\" alt=\"Meyer Sound 900-LFC powered subwoofer with QCLP weather protection and rigging frame\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis weather-protected QCLP variant adds environmental protection to the standard 900-LFC while retaining the integrated rigging frame. The captive GuideALinks enable flying from the MG-LEOPARD\/900 multipurpose grid in LEOPARD arrays without a transition frame, and support ground-stacked configurations with uptilt or downtilt. Standalone subwoofer arrays can be set at splay angles of 0, 1.25, 2.5, 3.75, or 5 degrees. Inside, a two-channel open-loop class D amplifier rated at 3100 W peak resides in a field-replaceable module, with RMS remote monitoring reporting operating parameters to a host computer. The integral pole-mount receptacle pairs the unit with ULTRA Series loudspeakers. For larger low-frequency formats consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms\"\u003eMeyer Sound VLFC arrayable subwoofer\u003c\/a\u003e, and pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e. Explore the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e for processing and accessories.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQCLP Weather Protection\u003c\/strong\u003e — Environmental protection allows deployment in outdoor and semi-exposed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 18-inch cone driver with 2 ohm nominal impedance produces high-output, low-distortion low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly Rigging Frame\u003c\/strong\u003e — Captive GuideALinks allow direct flying from the MG-LEOPARD\/900 grid and support ground-stacked and cardioid arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Splay Angles\u003c\/strong\u003e — Subwoofer arrays can be configured at 0, 1.25, 2.5, 3.75, or 5 degrees.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Remote Monitoring\u003c\/strong\u003e — A two-conductor twisted-pair network reports all amplifier operating parameters to a Mac or Windows host computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole-mount receptacle pairs the subwoofer with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides weather-resistant low-frequency reinforcement for outdoor worship events and exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for large theatrical and presentation systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports flexible flown or ground-stacked low end across varied events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Delivers linear low frequencies for production and monitoring audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e32 Hz – 115 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e133 dB with crest factor \u0026gt;10 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 18-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions with Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 27.47 in x H 24.43 in x D 24.89 in (698 x 621 x 632 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight with Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e159 lb (72.1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 900-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b SL-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 900-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe SL-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 18-inch long-excursion driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses dual 21-inch drivers in a larger cabinet.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt includes Meyer Sound RMS remote monitoring of all amplifier parameters.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and LA Network Manager.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and R1 software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis QCLP variant is supplied with factory weather protection for exposed use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection is offered as a separate WR variant.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection requires d\u0026amp;b NL or outdoor-rated variants.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan this subwoofer be used outdoors?\u003c\/strong\u003e Yes. This QCLP configuration includes factory weather protection intended for outdoor and semi-exposed installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it compatible with LEOPARD line arrays?\u003c\/strong\u003e Yes. The captive GuideALinks allow it to fly from the MG-LEOPARD\/900 multipurpose grid without a transition frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require an external amplifier?\u003c\/strong\u003e No. The 900-LFC is self-powered and can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it monitored?\u003c\/strong\u003e The unit includes Meyer Sound RMS, reporting all amplifier operating parameters to a Mac or Windows host computer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923922870508,"sku":"09.246.201.04","price":15400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-no-rig-with-weather-protection-creation-networks-64870.jpg?v=1757941335"},{"product_id":"meyer-sound-900-lfc-us-std-3p-norig-pm38mm","title":"Meyer Sound 900-LFC 3100W Powered Subwoofer with 18\" LF Driver (No Rig) - 09.246.201.11","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 900-LFC is a compact self-powered low-frequency control element for scalable low-frequency reinforcement in touring and fixed installations. This no-rig configuration omits the QuickFly rigging frame, making it ideal for ground-stacked and pole-mounted deployments at a lower cost and weight. A single 18-inch long-excursion driver and an onboard class D amplifier deliver high continuous output with extremely low distortion. It is a natural low-frequency complement for Meyer Sound LEOPARD line array systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-no-rig-with-weather-protection-creation-networks-64870.jpg?v=1757941335\" alt=\"Meyer Sound 900-LFC 3100W powered subwoofer with 18-inch LF driver, no rigging\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis variant ships without rigging, which lowers cabinet weight to 136 lb and suits ground-stacked subwoofer arrays and pole-mounted pairings. Inside, a two-channel open-loop class D amplifier rated at 3100 W peak resides in a single field-replaceable module containing the amplifier and control circuitry. The integral pole-mount receptacle pairs the unit with ULTRA Series loudspeakers, and RMS remote monitoring reports operating parameters to a Mac or Windows host computer. Units can later be transported in stacks using the optional MCF-900 caster frame, which accommodates cabinets with or without rigging. For flown applications, the rigging-equipped 900-LFC or the larger \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms\"\u003eMeyer Sound VLFC arrayable subwoofer\u003c\/a\u003e may be preferable, and the matching array system is the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e. See the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e for processing and accessories.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 18-inch cone driver with 2 ohm nominal impedance produces high-output, low-distortion low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-Rig Configuration\u003c\/strong\u003e — Without the rigging frame the cabinet weighs 136 lb and suits ground-stacked and pole-mounted deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM measure below 0.02 percent for exceptional linearity and transient reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Remote Monitoring\u003c\/strong\u003e — A two-conductor twisted-pair network reports all amplifier operating parameters to a host computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole-mount receptacle pairs the subwoofer with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster Frame Ready\u003c\/strong\u003e — Compatible with the optional MCF-900 caster frame for transport in stacks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides ground-stacked low-frequency reinforcement for worship spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for theatrical and presentation sound systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports flexible ground-stacked low end across varied events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Delivers linear, low-distortion low frequencies for production audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e32 Hz – 115 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e133 dB with crest factor \u0026gt;10 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 18-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 27.43 in x H 24.43 in x D 24.89 in (697 x 621 x 632 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e136 lb (61.7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 900-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b SL-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 900-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe SL-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 18-inch long-excursion driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses dual 21-inch drivers in a larger cabinet.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt includes Meyer Sound RMS remote monitoring of all amplifier parameters.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and LA Network Manager.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and R1 software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem Integration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt integrates directly with LEOPARD arrays using the shared MG-LEOPARD\/900 grid.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt integrates within the L-Acoustics K and Kara array ecosystem.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt integrates within the d\u0026amp;b SL-Series ecosystem.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan rigging be added later?\u003c\/strong\u003e This unit ships without the rigging frame. The optional MRK-900 rigging kit adds flying capability; please contact us to confirm field-fit options for your unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it compatible with LEOPARD systems?\u003c\/strong\u003e Yes. It is designed as a low-frequency complement for LEOPARD arrays and shares the MG-LEOPARD\/900 grid ecosystem when equipped with rigging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require an external amplifier?\u003c\/strong\u003e No. The 900-LFC is self-powered and can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it transported?\u003c\/strong\u003e The optional MCF-900 caster frame transports cabinets in stacks and accommodates units with or without rigging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923931848940,"sku":"09.246.201.11","price":11140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-no-rig-with-weather-protection-creation-networks-64870.jpg?v=1757941335"},{"product_id":"meyer-sound-900-lfc-us-w-p-qclp-3p-norig-38mm","title":"Meyer Sound 900-LFC 3100W Powered Subwoofer with QCLP (No Rig, with Weather Protection) - 09.246.201.12","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 900-LFC is a compact self-powered low-frequency control element for scalable low-frequency reinforcement across touring and fixed installations. This configuration combines QCLP weather protection with a no-rig cabinet, suiting ground-stacked or pole-mounted outdoor and semi-exposed deployments. A single 18-inch long-excursion driver and an onboard class D amplifier deliver high continuous output with extremely low distortion. It is a natural low-frequency complement for Meyer Sound LEOPARD line array systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-no-rig-with-weather-protection-creation-networks-64870.jpg?v=1757941335\" alt=\"Meyer Sound 900-LFC powered subwoofer with QCLP weather protection, no rigging\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis QCLP no-rig variant adds factory weather protection to the standard 900-LFC while omitting the rigging frame, keeping cabinet weight at 136 lb for ground-stacked and pole-mounted use. The cabinet houses a two-channel open-loop class D amplifier rated at 3100 W peak in a single field-replaceable module. The integral pole-mount receptacle pairs the unit with ULTRA Series loudspeakers, and RMS remote monitoring reports operating parameters to a host computer. Units transport in stacks using the optional MCF-900 caster frame. For flown weather-protected applications the rigging-equipped QCLP variant or the larger \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms\"\u003eMeyer Sound VLFC arrayable subwoofer\u003c\/a\u003e may suit better, and the matching array system is the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e for processing and accessories.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQCLP Weather Protection\u003c\/strong\u003e — Factory environmental protection allows deployment in outdoor and semi-exposed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 18-inch cone driver with 2 ohm nominal impedance produces high-output, low-distortion low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-Rig Configuration\u003c\/strong\u003e — Without the rigging frame the cabinet weighs 136 lb and suits ground-stacked and pole-mounted deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Remote Monitoring\u003c\/strong\u003e — A two-conductor twisted-pair network reports all amplifier operating parameters to a host computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole-mount receptacle pairs the subwoofer with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster Frame Ready\u003c\/strong\u003e — Compatible with the optional MCF-900 caster frame for transport in stacks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides weather-resistant ground-stacked low-frequency reinforcement for outdoor worship events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for theatrical and presentation sound systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports flexible ground-stacked low end across varied events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Delivers linear, low-distortion low frequencies for production audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e32 Hz – 115 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e133 dB with crest factor \u0026gt;10 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 18-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 27.43 in x H 24.43 in x D 24.89 in (697 x 621 x 632 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e136 lb (61.7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 900-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b SL-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 900-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe SL-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 18-inch long-excursion driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses dual 21-inch drivers in a larger cabinet.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt includes Meyer Sound RMS remote monitoring of all amplifier parameters.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and LA Network Manager.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and R1 software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis QCLP variant is supplied with factory weather protection for exposed use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection is offered as a separate WR variant.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection requires d\u0026amp;b NL or outdoor-rated variants.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan this subwoofer be used outdoors?\u003c\/strong\u003e Yes. This QCLP configuration includes factory weather protection for outdoor and semi-exposed installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it include rigging?\u003c\/strong\u003e No. This is a no-rig configuration suited to ground-stacked and pole-mounted use; rigging can be added with the optional MRK-900 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require an external amplifier?\u003c\/strong\u003e No. The 900-LFC is self-powered and can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it monitored?\u003c\/strong\u003e The unit includes Meyer Sound RMS, reporting all amplifier operating parameters to a Mac or Windows host computer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923932733676,"sku":"09.246.201.12","price":12550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-no-rig-with-weather-protection-creation-networks-64870.jpg?v=1757941335"},{"product_id":"meyer-sound-900-lfc-us-w-p-fld-3p-w-rig-38mm","title":"Meyer Sound Meyer Sound 900-LFC 3100W Powered Subwoofer with 18\" LF Driver and Rigging Frame (with Weather Protection) - 09.246.301.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 900-LFC is a compact self-powered low-frequency control element for scalable low-frequency reinforcement in touring and fixed installations. This configuration pairs the QuickFly rigging frame with factory weather protection, making it ready for flown, ground-stacked, and cardioid subwoofer arrays in outdoor and semi-exposed settings. A single 18-inch long-excursion driver and an onboard class D amplifier deliver high continuous output with extremely low distortion. It is a natural low-frequency complement for Meyer Sound LEOPARD line array systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-no-rig-with-weather-protection-creation-networks-64870.jpg?v=1757941335\" alt=\"Meyer Sound 900-LFC 3100W powered subwoofer with 18-inch LF driver, rigging frame and weather protection\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis weather-protected variant retains the integrated rigging frame, whose captive GuideALinks enable flying from the MG-LEOPARD\/900 multipurpose grid in LEOPARD arrays without a transition frame. The same end frames support ground-stacked configurations with uptilt or downtilt and standalone subwoofer arrays at splay angles of 0, 1.25, 2.5, 3.75, or 5 degrees. A two-channel open-loop class D amplifier rated at 3100 W peak resides in a field-replaceable module, with RMS remote monitoring reporting operating parameters to a host computer. The integral pole-mount receptacle pairs the unit with ULTRA Series loudspeakers. For larger low-frequency formats consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms\"\u003eMeyer Sound VLFC arrayable subwoofer\u003c\/a\u003e, and pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e. Explore the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e for processing and accessories.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Weather Protection\u003c\/strong\u003e — Environmental treatment allows deployment in outdoor and semi-exposed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 18-inch cone driver with 2 ohm nominal impedance produces high-output, low-distortion low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly Rigging Frame\u003c\/strong\u003e — Captive GuideALinks allow direct flying from the MG-LEOPARD\/900 grid and support ground-stacked and cardioid arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Splay Angles\u003c\/strong\u003e — Subwoofer arrays can be configured at 0, 1.25, 2.5, 3.75, or 5 degrees.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Remote Monitoring\u003c\/strong\u003e — A two-conductor twisted-pair network reports all amplifier operating parameters to a host computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole-mount receptacle pairs the subwoofer with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides weather-resistant flown or ground-stacked low-frequency reinforcement for worship events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for large theatrical and presentation systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports flexible flown or ground-stacked low end across varied events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Delivers linear low frequencies for production and monitoring audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e32 Hz – 115 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e133 dB with crest factor \u0026gt;10 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 18-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions with Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 27.47 in x H 24.43 in x D 24.89 in (698 x 621 x 632 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight with Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e159 lb (72.1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 900-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b SL-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 900-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe SL-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 18-inch long-excursion driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses dual 21-inch drivers in a larger cabinet.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt includes Meyer Sound RMS remote monitoring of all amplifier parameters.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and LA Network Manager.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and R1 software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis variant is supplied with factory weather protection for exposed use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection is offered as a separate WR variant.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection requires d\u0026amp;b NL or outdoor-rated variants.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan this subwoofer be used outdoors?\u003c\/strong\u003e Yes. This configuration includes factory weather protection for outdoor and semi-exposed installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it compatible with LEOPARD line arrays?\u003c\/strong\u003e Yes. The captive GuideALinks allow it to fly from the MG-LEOPARD\/900 multipurpose grid without a transition frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require an external amplifier?\u003c\/strong\u003e No. The 900-LFC is self-powered and can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it monitored?\u003c\/strong\u003e The unit includes Meyer Sound RMS, reporting all amplifier operating parameters to a Mac or Windows host computer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923937616108,"sku":"09.246.301.04","price":15400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-no-rig-with-weather-protection-creation-networks-64870.jpg?v=1757941335"},{"product_id":"meyer-sound-900-lfc-us-w-p-fld-3p-norig-38mm","title":"Meyer Sound 900-LFC 3100W Powered Subwoofer with 18\" LF Driver (No Rig, with Weather Protection) - 09.246.301.12","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 900-LFC is a compact self-powered low-frequency control element for scalable low-frequency reinforcement across touring and fixed installations. This configuration combines a no-rig cabinet with factory weather protection, suiting ground-stacked or pole-mounted outdoor and semi-exposed deployments. A single 18-inch long-excursion driver and an onboard class D amplifier deliver high continuous output with extremely low distortion. It is a natural low-frequency complement for Meyer Sound LEOPARD line array systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-no-rig-with-weather-protection-creation-networks-64870.jpg?v=1757941335\" alt=\"Meyer Sound 900-LFC powered subwoofer with 18-inch LF driver, no rig and weather protection\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis weather-protected no-rig variant adds factory environmental protection to the standard 900-LFC while omitting the rigging frame, keeping cabinet weight at 136 lb for ground-stacked and pole-mounted use. The cabinet houses a two-channel open-loop class D amplifier rated at 3100 W peak in a single field-replaceable module. The integral pole-mount receptacle pairs the unit with ULTRA Series loudspeakers, and RMS remote monitoring reports operating parameters to a host computer. Units transport in stacks using the optional MCF-900 caster frame. For flown weather-protected applications the rigging-equipped variant or the larger \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms\"\u003eMeyer Sound VLFC arrayable subwoofer\u003c\/a\u003e may be preferable, and the matching array system is the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e for processing and accessories.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Weather Protection\u003c\/strong\u003e — Environmental treatment allows deployment in outdoor and semi-exposed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 18-inch cone driver with 2 ohm nominal impedance produces high-output, low-distortion low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-Rig Configuration\u003c\/strong\u003e — Without the rigging frame the cabinet weighs 136 lb and suits ground-stacked and pole-mounted deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Remote Monitoring\u003c\/strong\u003e — A two-conductor twisted-pair network reports all amplifier operating parameters to a host computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole-mount receptacle pairs the subwoofer with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster Frame Ready\u003c\/strong\u003e — Compatible with the optional MCF-900 caster frame for transport in stacks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides weather-resistant ground-stacked low-frequency reinforcement for outdoor worship events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for theatrical and presentation sound systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports flexible ground-stacked low end across varied events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Delivers linear, low-distortion low frequencies for production audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e32 Hz – 115 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e133 dB with crest factor \u0026gt;10 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 18-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 27.43 in x H 24.43 in x D 24.89 in (697 x 621 x 632 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e136 lb (61.7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 900-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b SL-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 900-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe SL-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 18-inch long-excursion driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses dual 21-inch drivers in a larger cabinet.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt includes Meyer Sound RMS remote monitoring of all amplifier parameters.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and LA Network Manager.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and R1 software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis variant is supplied with factory weather protection for exposed use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection is offered as a separate WR variant.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection requires d\u0026amp;b NL or outdoor-rated variants.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan this subwoofer be used outdoors?\u003c\/strong\u003e Yes. This configuration includes factory weather protection for outdoor and semi-exposed installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it include rigging?\u003c\/strong\u003e No. This is a no-rig configuration suited to ground-stacked and pole-mounted use; rigging can be added with the optional MRK-900 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require an external amplifier?\u003c\/strong\u003e No. The 900-LFC is self-powered and can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it monitored?\u003c\/strong\u003e The unit includes Meyer Sound RMS, reporting all amplifier operating parameters to a Mac or Windows host computer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923938992364,"sku":"09.246.301.12","price":12550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-no-rig-with-weather-protection-creation-networks-64870.jpg?v=1757941335"},{"product_id":"meyer-sound-900-lfc-mpk-pole-35mm-m20-adj-universal-pole-kit","title":"Meyer Sound 900-LFC MPK-POLE,35MM\/M20 ADJ. UNIVERSAL POLE KIT - 40.010.973.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MPK-POLE is a universal pole-mount kit for placing a Meyer Sound loudspeaker on top of a 750-LFC or 900-LFC subwoofer using the cabinet's integral pole mount. This 35 mm \/ M20 model is the fixed-length pole intended primarily for EU-version subwoofers, providing a stable speaker pole accessory for compact low-frequency stacks. It is a practical mounting solution for pairing a ULTRA Series loudspeaker over a Meyer Sound subwoofer.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-mpk-pole35mmm20-adj-universal-pole-kit-creation-networks-10011.jpg?v=1757941337\" alt=\"Meyer Sound MPK-POLE 35MM\/M20 universal pole kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eConstructed from steel, the MPK-POLE 35MM\/M20 is a 47-inch fixed pole with an M20 slug on one end, making it the ideal pole for the EU version of the 750-LFC and 900-LFC. It mounts into the heavy-duty integral pole receptacle on the subwoofer and supports loudspeakers placed above. For the adjustable variant, Meyer Sound also offers the MPK-POLE 35 model. This accessory pairs with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered subwoofer\u003c\/a\u003e; browse related items in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Construction\u003c\/strong\u003e — The pole is built from steel for durable, stable loudspeaker support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed 47-inch Length\u003c\/strong\u003e — A 47-inch fixed pole positions the upper loudspeaker at a consistent height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 mm with M20 Slug\u003c\/strong\u003e — The 35 mm pole with an M20 slug on one end suits the EU version of the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole-Mount Compatible\u003c\/strong\u003e — It seats in the heavy-duty integral pole receptacle of the 750-LFC and 900-LFC.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMPK-POLE 35MM\/M20 (fixed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e47 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePole Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35 mm with M20 slug on one end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e750-LFC and 900-LFC integral pole mount (EU version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923957047532,"sku":"40.010.973.01","price":170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-mpk-pole35mmm20-adj-universal-pole-kit-creation-networks-10011.jpg?v=1757941337"},{"product_id":"meyer-sound-mg-leopard-900-lfc-grid-kit","title":"Meyer Sound MCF-900-LFC Caster Frame Kit - 40.246.130.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MCF-900 caster frame is a transport accessory that safely moves up to two 900-LFC subwoofers as a unit, simplifying the assembly and disassembly of arrays in blocks of two cabinets. This adjustable caster board accommodates 900-LFC cabinets with or without rigging, making it a practical road-ready transport solution for touring and rental inventories.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mcf-900-lfc-caster-frame-kit-creation-networks-62298.jpg?v=1757941338\" alt=\"Meyer Sound MCF-900-LFC caster frame kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MCF-900 caster frame is engineered specifically for the 900-LFC, transporting a stack of up to two cabinets and allowing arrays to be moved and built in two-cabinet blocks. Its adjustable design fits 900-LFC cabinets in both rigging and no-rigging configurations. This accessory complements the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-and-rigging-frame\"\u003eMeyer Sound 900-LFC subwoofer\u003c\/a\u003e; browse related transport and rigging items in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Cabinet Capacity\u003c\/strong\u003e — The frame safely transports up to two 900-LFC subwoofers as a single rolling unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlock Assembly\u003c\/strong\u003e — It allows arrays to be assembled and disassembled in convenient blocks of two cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Fit\u003c\/strong\u003e — The adjustable design accommodates 900-LFC cabinets with or without rigging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster Mobility\u003c\/strong\u003e — Integrated casters allow stacks to be rolled into position with minimal handling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMCF-900 Caster Frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to two 900-LFC cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e900-LFC with or without rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAdjustability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAdjustable frame to fit both cabinet configurations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923958489324,"sku":"40.246.130.01","price":2040.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mcf-900-lfc-caster-frame-kit-creation-networks-62298.jpg?v=1757941338"},{"product_id":"meyer-sound-900-lfc-1-high-pullover-speaker-cover","title":"Meyer Sound 900-LFC 1 High Pullover Speaker Cover - 79.246.025.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 900-LFC 1 High Pullover Speaker Cover is a protective cover sized for a single 900-LFC subwoofer cabinet. It guards the enclosure against dust, scuffs, and incidental moisture during transport and storage, helping keep touring and rental 900-LFC inventory road-ready.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-2-high-pullover-speaker-cover-creation-networks-91858.jpg?v=1757941340\" alt=\"Meyer Sound 900-LFC 1 high pullover speaker cover\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis pullover-style cover slips over one 900-LFC cabinet for protection during handling and storage. It is part of the protective cover range that allows the 900-LFC to be transported in stacks alongside the MCF-900 caster frame. This accessory protects the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-and-rigging-frame\"\u003eMeyer Sound 900-LFC subwoofer\u003c\/a\u003e; browse related transport accessories in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Cabinet Fit\u003c\/strong\u003e — The cover is sized to fit one 900-LFC subwoofer cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePullover Design\u003c\/strong\u003e — The pullover style installs quickly over the top of the cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Protection\u003c\/strong\u003e — It shields the enclosure finish from dust, scuffs, and incidental moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport Ready\u003c\/strong\u003e — It supports road-ready handling and storage of 900-LFC inventory.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e900-LFC 1 High Pullover Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 900-LFC cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePullover protective cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e900-LFC subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923983229164,"sku":"79.246.025.01","price":1110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-2-high-pullover-speaker-cover-creation-networks-91858.jpg?v=1757941340"},{"product_id":"meyer-sound-900-lfc-2-high-pullover-speaker-cover","title":"Meyer Sound 900-LFC 2 High Pullover Speaker Cover - 79.246.025.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 900-LFC 2 High Pullover Speaker Cover is a protective cover sized for a stack of two 900-LFC subwoofer cabinets. It guards the enclosures against dust, scuffs, and incidental moisture during transport and storage, keeping a two-cabinet 900-LFC stack road-ready.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-2-high-pullover-speaker-cover-creation-networks-91858.jpg?v=1757941340\" alt=\"Meyer Sound 900-LFC 2 high pullover speaker cover\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis pullover-style cover slips over a stack of two 900-LFC cabinets for protection during handling and storage. It pairs naturally with the MCF-900 caster frame, which transports up to two 900-LFC cabinets at a time. This accessory protects the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-and-rigging-frame\"\u003eMeyer Sound 900-LFC subwoofer\u003c\/a\u003e; browse related transport accessories in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Cabinet Fit\u003c\/strong\u003e — The cover is sized to fit a stack of two 900-LFC subwoofer cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePullover Design\u003c\/strong\u003e — The pullover style installs over the top of the cabinet stack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Protection\u003c\/strong\u003e — It shields the enclosure finish from dust, scuffs, and incidental moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster Frame Pairing\u003c\/strong\u003e — It complements the MCF-900 caster frame for road-ready two-cabinet transport.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e900-LFC 2 High Pullover Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 900-LFC cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePullover protective cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e900-LFC subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923992699116,"sku":"79.246.025.02","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-2-high-pullover-speaker-cover-creation-networks-91858.jpg?v=1757941340"},{"product_id":"meyer-sound-900-lfc-2-high-speaker-wrap-cover","title":"Meyer Sound 900-LFC 2 High Speaker Wrap Cover - 79.246.026.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 900-LFC 2 High Speaker Wrap Cover is a protective wrap-style cover sized for a stack of two 900-LFC subwoofer cabinets. The wrap design encloses the stack on multiple sides to guard against dust, scuffs, and incidental moisture during transport and storage.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-2-high-speaker-wrap-cover-creation-networks-73375.webp?v=1757941341\" alt=\"Meyer Sound 900-LFC 2 high speaker wrap cover\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eUnlike the pullover style, this wrap cover wraps around a stack of two 900-LFC cabinets for fuller coverage during handling and storage. It pairs naturally with the MCF-900 caster frame for transporting two cabinets together. This accessory protects the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-and-rigging-frame\"\u003eMeyer Sound 900-LFC subwoofer\u003c\/a\u003e; browse related transport accessories in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Cabinet Fit\u003c\/strong\u003e — The cover is sized to fit a stack of two 900-LFC subwoofer cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWrap Design\u003c\/strong\u003e — The wrap style encloses the stack on multiple sides for fuller protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Protection\u003c\/strong\u003e — It shields the enclosure finish from dust, scuffs, and incidental moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster Frame Pairing\u003c\/strong\u003e — It complements the MCF-900 caster frame for road-ready two-cabinet transport.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e900-LFC 2 High Wrap Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 900-LFC cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWrap protective cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e900-LFC subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923998859500,"sku":"79.246.026.02","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-900-lfc-2-high-speaker-wrap-cover-creation-networks-73375.webp?v=1757941341"},{"product_id":"meyer-sound-750-lfc-15-rigging-subwoofer-3-pin-input","title":"Meyer Sound 750-LFC 15\" Rigging Subwoofer, 3-Pin Input - 09.271.001.07","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 750-LFC is a very compact self-powered low-frequency control element for scalable low-frequency reinforcement in portable rigs and fixed installations. This configuration ships with QuickFly rigging and a 3-pin balanced audio input, making it ready for flown, ground-stacked, and cardioid subwoofer arrays. A single 15-inch long-excursion driver and an onboard class D amplifier deliver high continuous output with extremely low distortion. It is a natural low-frequency complement for Meyer Sound LINA and LEOPARD systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-fold-with-weather-protection-creation-networks-59024.webp?v=1757941346\" alt=\"Meyer Sound 750-LFC 15-inch rigging subwoofer with 3-pin input\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis rigging-equipped 750-LFC includes the MRK-750 rigging kit, whose captive GuideALinks allow flying from the MG-MINA\/LINA grid in LINA arrays without a transition frame. The end frames support ground-stacked and cardioid configurations and subwoofer-array splay angles of 0, 1.5, 3.25, or 4.75 degrees. This 3-pin input variant carries balanced audio on XLR connectors without RMS signals. Inside, a two-channel open-loop class D amplifier rated at 3100 W peak resides in a field-replaceable module. For a larger 18-inch element consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-and-rigging-frame\"\u003eMeyer Sound 900-LFC subwoofer\u003c\/a\u003e, and pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e for processing and accessories.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly Rigging\u003c\/strong\u003e — The MRK-750 rigging with captive GuideALinks allows flying from the MG-MINA\/LINA grid without a transition frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 15-inch cone driver with 2 ohm nominal impedance produces high-output, low-distortion low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin Balanced Input\u003c\/strong\u003e — XLR 3-pin female with male loop carries balanced audio for straightforward signal distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Splay Angles\u003c\/strong\u003e — Subwoofer arrays can be configured at 0, 1.5, 3.25, or 4.75 degrees.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Capable\u003c\/strong\u003e — Rigging supports cardioid arrays to reduce output behind the loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole mount supports LINA loudspeakers above or pairing with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides flown or ground-stacked low-frequency reinforcement for worship spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for theatrical and presentation systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports flexible flown or ground-stacked low end across varied events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Delivers linear, low-distortion low frequencies for production audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e37 Hz – 110 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e130.5 dB with crest factor \u0026gt;9 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female with male loop (balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions with Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 21.55 in x H 20.43 in x D 20.88 in (547 x 519 x 530 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight with Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e105 lb (47.6 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 750-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b V-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 750-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe V-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 15-inch long-excursion driver in a very compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver in a larger cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a cardioid-arranged multi-driver design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging Integration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaptive GuideALinks fly directly from the MG-MINA\/LINA grid without a transition frame.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses L-Acoustics rigging bars within the Kara\/Kiva ecosystem.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses d\u0026amp;b rigging hardware within the V-Series ecosystem.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt supports optional Meyer Sound RMS remote monitoring of amplifier parameters.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and LA Network Manager.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and R1 software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes this configuration include rigging?\u003c\/strong\u003e Yes. This version ships with QuickFly rigging for flown, ground-stacked, and cardioid configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 3-pin input carry?\u003c\/strong\u003e The XLR 3-pin connectors carry balanced audio only; the 5-pin option is required to also carry RMS signals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it compatible with LINA arrays?\u003c\/strong\u003e Yes. The captive GuideALinks allow it to fly from the MG-MINA\/LINA grid without a transition frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require an external amplifier?\u003c\/strong\u003e No. The 750-LFC is self-powered and can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924014325996,"sku":"09.271.001.07","price":9700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-fold-with-weather-protection-creation-networks-59024.webp?v=1757941346"},{"product_id":"meyer-sound-750-lfc-us-std-3p-no-rig-pm38mm","title":"Meyer Sound 750-LFC 3100W 15-inch Powered Subwoofer (No Rig) - 09.271.001.10","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 750-LFC is a very compact self-powered low-frequency control element for scalable low-frequency reinforcement in portable rigs and fixed installations. This no-rig configuration omits the QuickFly rigging kit, making it ideal for ground-stacked and pole-mounted deployments at a lower cost and weight. A single 15-inch long-excursion driver and an onboard class D amplifier deliver high continuous output with extremely low distortion. It is a natural low-frequency complement for Meyer Sound LINA, LEOPARD, and ULTRA Series systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-fold-with-weather-protection-creation-networks-59024.webp?v=1757941346\" alt=\"Meyer Sound 750-LFC 3100W 15-inch powered subwoofer, no rigging\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis variant ships without rigging, which keeps cabinet weight at 89 lb and suits ground-stacked subwoofer arrays and pole-mounted pairings. The integral pole mount supports placing one or two LINA loudspeakers on top using the MUB-MINA\/LINA U bracket or MYA-MINA\/LINA yoke, or pairing with ULTRA Series loudspeakers. Inside, a two-channel open-loop class D amplifier rated at 3100 W peak resides in a single field-replaceable module. Units transport in stacks using the optional MCF-750 caster frame in the no-rigging version. For flown applications consider the rigging-equipped 750-LFC, or step up to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-and-rigging-frame\"\u003eMeyer Sound 900-LFC subwoofer\u003c\/a\u003e. Pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 15-inch cone driver with 2 ohm nominal impedance produces high-output, low-distortion low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-Rig Configuration\u003c\/strong\u003e — Without the rigging kit the cabinet weighs 89 lb and suits ground-stacked and pole-mounted deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM measure below 0.02 percent for exceptional linearity and transient reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole mount supports LINA loudspeakers above or pairing with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster Frame Ready\u003c\/strong\u003e — Compatible with the no-rigging version of the MCF-750 caster frame for transport in stacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Ready\u003c\/strong\u003e — An optional RMS module reports all amplifier operating parameters to a host computer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides ground-stacked low-frequency reinforcement for worship spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference Room\u003c\/strong\u003e — Adds controlled low end for high-quality presentation and media playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports portable low-frequency support across varied events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for theatrical and presentation systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e37 Hz – 110 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e130.5 dB with crest factor \u0026gt;9 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 21.80 in x H 20.30 in x D 20.88 in (554 x 515 x 530 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e89 lb (40.3 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 750-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b V-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 750-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe V-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 15-inch long-excursion driver in a very compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver in a larger cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a cardioid-arranged multi-driver design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt supports optional Meyer Sound RMS remote monitoring of amplifier parameters.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and LA Network Manager.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and R1 software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem Integration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt integrates directly with LINA arrays using the shared MG-MINA\/LINA grid.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt integrates within the L-Acoustics Kara and Kiva ecosystem.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt integrates within the d\u0026amp;b V-Series ecosystem.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan rigging be added later?\u003c\/strong\u003e This unit ships without rigging. The optional MRK-750 rigging kit adds flying capability; please contact us to confirm field-fit options.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I mount loudspeakers on top of it?\u003c\/strong\u003e Yes. The integral pole mount supports one or two LINA loudspeakers using the MUB-MINA\/LINA U bracket or MYA-MINA\/LINA yoke, or ULTRA Series loudspeakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require an external amplifier?\u003c\/strong\u003e No. The 750-LFC is self-powered and can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it transported?\u003c\/strong\u003e The no-rigging version of the MCF-750 caster frame transports cabinets in stacks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924024418540,"sku":"09.271.001.10","price":7530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-fold-with-weather-protection-creation-networks-59024.webp?v=1757941346"},{"product_id":"meyer-sound-750-lfc-us-w-p-fixed-3p-no-rig-pm38mm","title":"Meyer Sound 750-LFC 3100W 15-inch Powered Subwoofer (Fixed, No Rig) - 09.271.001.11","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 750-LFC is a very compact self-powered low-frequency control element for scalable low-frequency reinforcement in portable rigs and fixed installations. This configuration combines a fixed weather-protection treatment with a no-rig cabinet, suiting permanent ground-stacked or pole-mounted installs in semi-exposed locations. A single 15-inch long-excursion driver and an onboard class D amplifier deliver high continuous output with extremely low distortion. It is a natural low-frequency complement for Meyer Sound LINA, LEOPARD, and ULTRA Series systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-fold-with-weather-protection-creation-networks-59024.webp?v=1757941346\" alt=\"Meyer Sound 750-LFC 3100W 15-inch powered subwoofer, fixed weather protection, no rigging\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis fixed, no-rig variant adds a fixed weather-protection treatment to the standard 750-LFC while omitting rigging, keeping cabinet weight at 89 lb for permanent ground-stacked and pole-mounted installations. The integral pole mount supports LINA loudspeakers above or pairing with ULTRA Series loudspeakers. Inside, a two-channel open-loop class D amplifier rated at 3100 W peak resides in a single field-replaceable module. For a flown weather-protected option consider the fold rigging variant, or step up to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-and-rigging-frame\"\u003eMeyer Sound 900-LFC subwoofer\u003c\/a\u003e. Pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed Weather Protection\u003c\/strong\u003e — A fixed weather-protection treatment suits permanent semi-exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 15-inch cone driver with 2 ohm nominal impedance produces high-output, low-distortion low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-Rig Configuration\u003c\/strong\u003e — Without rigging the cabinet weighs 89 lb and suits ground-stacked and pole-mounted installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole mount supports LINA loudspeakers above or pairing with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM measure below 0.02 percent for exceptional linearity and transient reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Ready\u003c\/strong\u003e — An optional RMS module reports all amplifier operating parameters to a host computer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides weather-resistant ground-stacked low-frequency reinforcement for worship spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for theatrical and presentation systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports fixed low-frequency support in semi-exposed venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Delivers linear, low-distortion low frequencies for production audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e37 Hz – 110 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e130.5 dB with crest factor \u0026gt;9 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 21.80 in x H 20.30 in x D 20.88 in (554 x 515 x 530 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e89 lb (40.3 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 750-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b V-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 750-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe V-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 15-inch long-excursion driver in a very compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver in a larger cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a cardioid-arranged multi-driver design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis variant is supplied with a fixed weather-protection treatment for semi-exposed use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection is offered as a separate WR variant.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection requires d\u0026amp;b outdoor-rated variants.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt supports optional Meyer Sound RMS remote monitoring of amplifier parameters.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and LA Network Manager.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and R1 software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan this subwoofer be used in semi-exposed locations?\u003c\/strong\u003e Yes. This fixed configuration includes a fixed weather-protection treatment intended for permanent semi-exposed installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it include rigging?\u003c\/strong\u003e No. This is a no-rig configuration suited to ground-stacked and pole-mounted use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require an external amplifier?\u003c\/strong\u003e No. The 750-LFC is self-powered and can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it monitored?\u003c\/strong\u003e An optional RMS module reports all amplifier operating parameters to a Mac or Windows host computer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924027138284,"sku":"09.271.001.11","price":8880.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-fold-with-weather-protection-creation-networks-59024.webp?v=1757941346"},{"product_id":"meyer-sound-750-lfc-us-w-p-fixed-3p-w-rig-pm38mm","title":"Meyer Sound Meyer Sound 750-LFC 3100W 15-inch Powered Subwoofer (Fixed) - 09.271.001.08","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 750-LFC is a very compact self-powered low-frequency control element for scalable low-frequency reinforcement in portable rigs and fixed installations. This configuration combines a fixed weather-protection treatment with QuickFly rigging, making it ready for flown, ground-stacked, and cardioid arrays in semi-exposed installations. A single 15-inch long-excursion driver and an onboard class D amplifier deliver high continuous output with extremely low distortion. It is a natural low-frequency complement for Meyer Sound LINA and LEOPARD systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-fold-with-weather-protection-creation-networks-59024.webp?v=1757941346\" alt=\"Meyer Sound 750-LFC 3100W 15-inch powered subwoofer, fixed weather protection with rigging\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis fixed weather-protected variant retains the MRK-750 rigging, whose captive GuideALinks allow flying from the MG-MINA\/LINA grid in LINA arrays without a transition frame. The end frames support ground-stacked and cardioid configurations and subwoofer-array splay angles of 0, 1.5, 3.25, or 4.75 degrees. Inside, a two-channel open-loop class D amplifier rated at 3100 W peak resides in a single field-replaceable module. The integral pole mount supports LINA loudspeakers above or pairing with ULTRA Series loudspeakers. For a larger 18-inch element consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-and-rigging-frame\"\u003eMeyer Sound 900-LFC subwoofer\u003c\/a\u003e, and pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e for processing and accessories.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed Weather Protection\u003c\/strong\u003e — A fixed weather-protection treatment suits permanent semi-exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly Rigging\u003c\/strong\u003e — The MRK-750 rigging with captive GuideALinks allows flying from the MG-MINA\/LINA grid without a transition frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 15-inch cone driver with 2 ohm nominal impedance produces high-output, low-distortion low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Splay Angles\u003c\/strong\u003e — Subwoofer arrays can be configured at 0, 1.5, 3.25, or 4.75 degrees.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Capable\u003c\/strong\u003e — Rigging supports cardioid arrays to reduce output behind the loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole mount supports LINA loudspeakers above or pairing with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides weather-resistant flown or ground-stacked low-frequency reinforcement for worship spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for theatrical and presentation systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports flexible flown or ground-stacked low end in semi-exposed venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Delivers linear, low-distortion low frequencies for production audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e37 Hz – 110 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e130.5 dB with crest factor \u0026gt;9 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions with Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 21.55 in x H 20.43 in x D 20.88 in (547 x 519 x 530 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight with Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e105 lb (47.6 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 750-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b V-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 750-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe V-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 15-inch long-excursion driver in a very compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver in a larger cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a cardioid-arranged multi-driver design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis variant is supplied with a fixed weather-protection treatment for semi-exposed use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection is offered as a separate WR variant.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection requires d\u0026amp;b outdoor-rated variants.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging Integration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaptive GuideALinks fly directly from the MG-MINA\/LINA grid without a transition frame.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses L-Acoustics rigging bars within the Kara\/Kiva ecosystem.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses d\u0026amp;b rigging hardware within the V-Series ecosystem.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan this subwoofer be used in semi-exposed locations?\u003c\/strong\u003e Yes. This fixed configuration includes a fixed weather-protection treatment for permanent semi-exposed installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it include rigging?\u003c\/strong\u003e Yes. This version ships with QuickFly rigging for flown, ground-stacked, and cardioid configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it compatible with LINA arrays?\u003c\/strong\u003e Yes. The captive GuideALinks allow it to fly from the MG-MINA\/LINA grid without a transition frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require an external amplifier?\u003c\/strong\u003e No. The 750-LFC is self-powered and can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924417896684,"sku":"09.271.001.08","price":11060.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-fold-with-weather-protection-creation-networks-59024.webp?v=1757941346"},{"product_id":"meyer-sound-750-lfc-us-w-p-fold-3p-no-rig-pm38mm","title":"Meyer Sound 750-LFC 3100W 15-inch Powered Subwoofer (Fold, No Rig, with Weather Protection) - 09.271.001.12","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 750-LFC is a very compact self-powered low-frequency control element for scalable low-frequency reinforcement in portable rigs and fixed installations. This configuration combines a fold weather-protection treatment with a no-rig cabinet, suiting portable and semi-exposed ground-stacked or pole-mounted deployments. A single 15-inch long-excursion driver and an onboard class D amplifier deliver high continuous output with extremely low distortion. It is a natural low-frequency complement for Meyer Sound LINA, LEOPARD, and ULTRA Series systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-fold-with-weather-protection-creation-networks-59024.webp?v=1757941346\" alt=\"Meyer Sound 750-LFC 3100W 15-inch powered subwoofer, fold weather protection, no rigging\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis fold weather-protected no-rig variant adds a fold-style weather-protection treatment to the standard 750-LFC while omitting rigging, keeping cabinet weight at 89 lb for portable ground-stacked and pole-mounted use. The integral pole mount supports LINA loudspeakers above or pairing with ULTRA Series loudspeakers. Inside, a two-channel open-loop class D amplifier rated at 3100 W peak resides in a single field-replaceable module. For a flown weather-protected option consider the fold rigging variant, or step up to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-and-rigging-frame\"\u003eMeyer Sound 900-LFC subwoofer\u003c\/a\u003e. Pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFold Weather Protection\u003c\/strong\u003e — A fold-style weather-protection treatment suits portable semi-exposed deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 15-inch cone driver with 2 ohm nominal impedance produces high-output, low-distortion low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-Rig Configuration\u003c\/strong\u003e — Without rigging the cabinet weighs 89 lb and suits ground-stacked and pole-mounted use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole mount supports LINA loudspeakers above or pairing with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM measure below 0.02 percent for exceptional linearity and transient reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Ready\u003c\/strong\u003e — An optional RMS module reports all amplifier operating parameters to a host computer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides weather-resistant ground-stacked low-frequency reinforcement for worship events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for theatrical and presentation systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports portable low-frequency support in semi-exposed venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Delivers linear, low-distortion low frequencies for production audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e37 Hz – 110 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e130.5 dB with crest factor \u0026gt;9 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 21.80 in x H 20.30 in x D 20.88 in (554 x 515 x 530 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight without Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e89 lb (40.3 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 750-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b V-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 750-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe V-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 15-inch long-excursion driver in a very compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver in a larger cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a cardioid-arranged multi-driver design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis variant is supplied with a fold weather-protection treatment for semi-exposed use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection is offered as a separate WR variant.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection requires d\u0026amp;b outdoor-rated variants.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt supports optional Meyer Sound RMS remote monitoring of amplifier parameters.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and LA Network Manager.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring is handled through the external amplifier and R1 software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan this subwoofer be used in semi-exposed locations?\u003c\/strong\u003e Yes. This fold configuration includes a fold weather-protection treatment for portable semi-exposed use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it include rigging?\u003c\/strong\u003e No. This is a no-rig configuration suited to ground-stacked and pole-mounted use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require an external amplifier?\u003c\/strong\u003e No. The 750-LFC is self-powered and can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it monitored?\u003c\/strong\u003e An optional RMS module reports all amplifier operating parameters to a Mac or Windows host computer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924430840044,"sku":"09.271.001.12","price":8880.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-fold-with-weather-protection-creation-networks-59024.webp?v=1757941346"},{"product_id":"meyer-sound-750-lfc-us-w-p-fold-3p-w-rig-pm38mm","title":"Meyer Sound Meyer Sound 750-LFC 3100W 15-inch Powered Subwoofer (Fold, with Weather Protection) - 09.271.001.09","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 750-LFC is a very compact self-powered low-frequency control element for scalable low-frequency reinforcement in portable rigs and fixed installations. This configuration combines a fold weather-protection treatment with QuickFly rigging, making it ready for flown, ground-stacked, and cardioid arrays in semi-exposed deployments. A single 15-inch long-excursion driver and an onboard class D amplifier deliver high continuous output with extremely low distortion. It is a natural low-frequency complement for Meyer Sound LINA and LEOPARD systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-fold-with-weather-protection-creation-networks-59024.webp?v=1757941346\" alt=\"Meyer Sound 750-LFC 3100W 15-inch powered subwoofer, fold weather protection with rigging\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis fold weather-protected variant retains the MRK-750 rigging, whose captive GuideALinks allow flying from the MG-MINA\/LINA grid in LINA arrays without a transition frame. The end frames support ground-stacked and cardioid configurations and subwoofer-array splay angles of 0, 1.5, 3.25, or 4.75 degrees. Inside, a two-channel open-loop class D amplifier rated at 3100 W peak resides in a single field-replaceable module. The integral pole mount supports LINA loudspeakers above or pairing with ULTRA Series loudspeakers. For a larger 18-inch element consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-900-lfc-3100w-powered-subwoofer-with-18-lf-driver-and-rigging-frame\"\u003eMeyer Sound 900-LFC subwoofer\u003c\/a\u003e, and pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e for processing and accessories.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFold Weather Protection\u003c\/strong\u003e — A fold-style weather-protection treatment suits portable semi-exposed deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly Rigging\u003c\/strong\u003e — The MRK-750 rigging with captive GuideALinks allows flying from the MG-MINA\/LINA grid without a transition frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch LF Driver\u003c\/strong\u003e — A single dual-coil, long-excursion 15-inch cone driver with 2 ohm nominal impedance produces high-output, low-distortion low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Class D Amplifier\u003c\/strong\u003e — A two-channel, open-loop class D amplifier rated at 3100 W peak is housed in a field-replaceable module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Splay Angles\u003c\/strong\u003e — Subwoofer arrays can be configured at 0, 1.5, 3.25, or 4.75 degrees.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Capable\u003c\/strong\u003e — Rigging supports cardioid arrays to reduce output behind the loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegral Pole Mount\u003c\/strong\u003e — A built-in pole mount supports LINA loudspeakers above or pairing with ULTRA Series loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides weather-resistant flown or ground-stacked low-frequency reinforcement for worship events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Extends low-frequency response for theatrical and presentation systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports flexible flown or ground-stacked low end in semi-exposed venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Delivers linear, low-distortion low frequencies for production audio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e37 Hz – 110 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 Hz – 110 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e130.5 dB with crest factor \u0026gt;9 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch dual-coil, long-excursion cone driver; 2 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop, class D; 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop; 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions with Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 21.55 in x H 20.43 in x D 20.88 in (547 x 519 x 530 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight with Rigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e105 lb (47.6 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound 750-LFC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics KS21\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b V-SUB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 750-LFC is self-powered with an integrated class D amplifier in the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KS21 is externally amplified and requires an LA-series amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe V-SUB is externally amplified and requires a d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDriver Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 15-inch long-excursion driver in a very compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 21-inch driver in a larger cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a cardioid-arranged multi-driver design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis variant is supplied with a fold weather-protection treatment for semi-exposed use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection is offered as a separate WR variant.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather protection requires d\u0026amp;b outdoor-rated variants.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging Integration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaptive GuideALinks fly directly from the MG-MINA\/LINA grid without a transition frame.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses L-Acoustics rigging bars within the Kara\/Kiva ecosystem.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses d\u0026amp;b rigging hardware within the V-Series ecosystem.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan this subwoofer be used in semi-exposed locations?\u003c\/strong\u003e Yes. This fold configuration includes a fold weather-protection treatment for portable semi-exposed use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it include rigging?\u003c\/strong\u003e Yes. This version ships with QuickFly rigging for flown, ground-stacked, and cardioid configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it compatible with LINA arrays?\u003c\/strong\u003e Yes. The captive GuideALinks allow it to fly from the MG-MINA\/LINA grid without a transition frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require an external amplifier?\u003c\/strong\u003e No. The 750-LFC is self-powered and can be driven and aligned using a Meyer Sound Galileo GALAXY Network Platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e This product is covered under Meyer Sound's standard product warranty. For details please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924431528172,"sku":"09.271.001.09","price":11060.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer-fold-with-weather-protection-creation-networks-59024.webp?v=1757941346"},{"product_id":"meyer-sound-mg-mina-lina-750-lfc-grid-w-glk-assy-kit","title":"Meyer Sound GLK-750-LFC Upgrade Kit - 40.207.301.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound GLK-750-LFC Grid Link Upgrade Kit increases the effective load rating of the MG-MINA\/LINA multipurpose grid when it is used with 750-LFC subwoofers. The kit supplies the two rear links and installation hardware that replace the middle links on the grid, supporting heavier 750-LFC array configurations in flown systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-glk-750-lfc-upgrade-kit-creation-networks-56443.jpg?v=1757941348\" alt=\"Meyer Sound GLK-750-LFC grid link upgrade kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eUsing the rear links from this kit instead of the middle links on the MG-MINA\/LINA grid effectively increases the grid's load rating when it is attached to 750-LFC cabinets. The kit includes the two rear links and installation hardware. Meyer Sound's MAPP System Design Tool should always be used to verify rigging load ratings. This kit supports flown arrays of the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC subwoofer\u003c\/a\u003e; browse related rigging accessories in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased Grid Load Rating\u003c\/strong\u003e — The rear links raise the effective load rating of the MG-MINA\/LINA grid when used with 750-LFC cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Kit\u003c\/strong\u003e — It includes the two rear links and the required installation hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid Compatible\u003c\/strong\u003e — The links replace the middle links on the MG-MINA\/LINA multipurpose grid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAPP Verified\u003c\/strong\u003e — Rigging load ratings should always be verified in Meyer Sound's MAPP System Design Tool.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eGLK-750-LFC Grid Link Upgrade Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo rear links and installation hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMG-MINA\/LINA multipurpose grid with 750-LFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIncreases effective grid load rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924436050156,"sku":"40.207.301.01","price":490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-glk-750-lfc-upgrade-kit-creation-networks-56443.jpg?v=1757941348"},{"product_id":"meyer-sound-750-lfc-2-high-pullover-speaker-cover","title":"Meyer Sound 750-LFC 2 High Pullover Speaker Cover - 79.271.160.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 750-LFC 2 High Pullover Speaker Cover is a durable protective cover sized for a stack of two 750-LFC subwoofer cabinets. It guards the enclosures against dust, scuffs, and incidental moisture during transport and storage, keeping a two-cabinet 750-LFC stack road-ready.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-750-lfc-3-high-pullover-speaker-cover-creation-networks-97720.jpg?v=1757941352\" alt=\"Meyer Sound 750-LFC 2 high pullover speaker cover\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis pullover-style nylon cover slips over a stack of two 750-LFC cabinets for protection during handling and storage. It pairs naturally with the MCF-750 caster frame, which transports up to three 750-LFC cabinets at a time. This accessory protects the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC subwoofer\u003c\/a\u003e; browse related transport accessories in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Cabinet Fit\u003c\/strong\u003e — The cover is sized to fit a stack of two 750-LFC subwoofer cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePullover Design\u003c\/strong\u003e — The pullover style installs over the top of the cabinet stack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Nylon\u003c\/strong\u003e — Durable nylon construction shields the enclosure finish from dust, scuffs, and incidental moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster Frame Pairing\u003c\/strong\u003e — It complements the MCF-750 caster frame for road-ready transport.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e750-LFC 2 High Pullover Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 750-LFC cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDurable nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e750-LFC subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924527898860,"sku":"79.271.160.02","price":990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-750-lfc-3-high-pullover-speaker-cover-creation-networks-97720.jpg?v=1757941352"},{"product_id":"meyer-sound-750-lfc-3-high-pullover-speaker-cover","title":"Meyer Sound 750-LFC 3 High Pullover Speaker Cover - 79.271.160.03","description":"\u003cp\u003ePullover cover for 3 Loudspeakers\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924528226540,"sku":"79.271.160.03","price":1200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-750-lfc-3-high-pullover-speaker-cover-creation-networks-97720.jpg?v=1757941352"},{"product_id":"meyer-sound-usw-210p-2x10-2-way-active-subwoofer-m8-3-pin-input","title":"Meyer Sound USW-210P 2x10\" 2-Way Active Subwoofer, M8, 3-Pin Input - 09.277.001.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound USW-210P is a self-powered 2x10\" compact narrow subwoofer engineered for installed sound applications that demand convincing low-frequency impact from a discreet, low-profile enclosure. Its dual 10-inch driver configuration delivers output equal to or exceeding many single 12-inch (or larger) subwoofers while occupying a slender footprint. This standard M8 model with 3-pin XLR input suits houses of worship, conference rooms, theatrical sound reinforcement, and commercial AV systems where an installed subwoofer must remain visually unobtrusive.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-210p-2x10-2-way-active-subwoofer-with-weather-protection-m8-3-pin-input-milan-creation-networks-53498.webp?v=1757941356\" alt=\"Meyer Sound USW-210P 2x10 inch active subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe USW-210P houses a two-channel Class D power amplifier with onboard signal processing for driver protection, frequency correction, and phase correction. Its slanted connector panel allows the cabinet to flush-mount against wall surfaces, reducing the required installation depth to 12 inches including connectors. The long, slender bass-reflex enclosure uses the same low-velocity port design found in Meyer Sound's flagship 1100-LFC low-frequency control element, yielding high efficiency and low port distortion. The cabinet integrates readily with Meyer Sound point-source and line-array systems and accepts 3-pin XLR balanced audio with a male loop output for daisy-chaining. This standard model ships with M8 mounting points at the top and bottom for use with the optional U-bracket. For higher-output low end, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered subwoofer\u003c\/a\u003e, and browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e for matched systems.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-inch drivers\u003c\/strong\u003e — Two 10-inch cone drivers in a narrow cabinet produce output comparable to larger single-driver subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile installation depth\u003c\/strong\u003e — The slanted connector panel enables flush wall mounting with only 12 inches of depth including connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard two-channel Class D amplifier delivers 1800 W peak total with crossover and driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-distortion port design\u003c\/strong\u003e — The low air-velocity port, derived from the 1100-LFC, provides clean, low-distortion output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible orientation\u003c\/strong\u003e — The cabinet can be placed horizontally or vertically to suit installation requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligent AC power supply\u003c\/strong\u003e — Automatic voltage selection, EMI filtering, soft current turn-on, and surge suppression are built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM8 mounting points\u003c\/strong\u003e — Top and bottom M8 threads accept the optional U-bracket for wall or ceiling mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Adds discreet low-frequency reinforcement to sanctuary sound systems without dominating the architecture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference room\u003c\/strong\u003e — Extends bass for presentation and program audio in a slim, wall-mountable form factor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low end for speech and music playback in performance and assembly spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Provides flexible bass support for varied AV program material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment space\u003c\/strong\u003e — Delivers controlled low-frequency output for briefing and assembly rooms requiring an unobtrusive install.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30–140 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e32–123 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40–123 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e126 dB with crest factor \u0026gt;11.5 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360° (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducers\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 10-inch cone drivers, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e2-channel Class D with crossover, 1800 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz, powerCON 20 with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 12.00 in x H 41.33 in x D 12.00 in (304.8 x 1049.8 x 304.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e56 lb (25.40 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium birch plywood, textured black finish; stamped-steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and bottom M8 threaded mounting points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat audio connection does this model use?\u003c\/strong\u003e This standard USW-210P uses a 3-pin XLR female input with a male loop output for daisy-chaining multiple cabinets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the USW-210P mounted?\u003c\/strong\u003e It ships with M8 threaded points at the top and bottom for the optional MUB-USW-210P U-bracket, and an optional aluminum base plate allows secure free-standing vertical placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be installed flush against a wall?\u003c\/strong\u003e Yes. The slanted connector panel reduces installation depth to 12 inches including connectors, allowing the cabinet to sit close to wall surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it integrate with other Meyer Sound loudspeakers?\u003c\/strong\u003e Yes. The USW-210P is designed to complement Meyer Sound point-source and line-array systems for full-range installed sound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924528718060,"sku":"09.277.001.01","price":5730.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-210p-2x10-2-way-active-subwoofer-with-weather-protection-m8-3-pin-input-milan-creation-networks-53498.webp?v=1757941356"},{"product_id":"meyer-sound-usw-210p-w-p-m8-3p-us","title":"Meyer Sound USW-210P-WP-3 2x10\" 2-Way Active Subwoofer with Weather Protection, M8, 3-Pin Input - 09.277.001.03","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound USW-210P-WP-3 is a weather-protected 2x10\" compact narrow subwoofer built for installed sound applications that combine demanding low-frequency output with exposure to moisture and the elements. Its dual 10-inch driver design delivers impact comparable to larger single-driver subwoofers from a slim, discreet enclosure, while the added weather protection suits covered outdoor and semi-exposed installations. This 3-pin XLR input model is well matched to houses of worship, outdoor commercial AV systems, theatrical sound reinforcement, and architectural installs requiring durable, low-profile bass.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-210p-2x10-2-way-active-subwoofer-with-weather-protection-m8-3-pin-input-milan-creation-networks-53498.webp?v=1757941356\" alt=\"Meyer Sound USW-210P-WP-3 weather-protected 2x10 inch active subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe USW-210P-WP-3 houses a two-channel Class D power amplifier with onboard signal processing for driver protection, frequency correction, and phase correction, and adds Meyer Sound weather protection treatment for use in exposed locations. Its slanted connector panel allows the cabinet to flush-mount against wall surfaces, reducing the required installation depth to 12 inches including connectors. The slender bass-reflex enclosure uses the same low air-velocity port design found in Meyer Sound's flagship 1100-LFC low-frequency control element for high efficiency and low port distortion. The cabinet accepts 3-pin XLR balanced audio with a male loop output and integrates with Meyer Sound point-source and line-array systems. For an indoor-only configuration, compare the standard USW-210P, and for greater output review the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered subwoofer\u003c\/a\u003e or the wider \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather protection\u003c\/strong\u003e — Factory weather-protection treatment allows installation in covered outdoor and semi-exposed environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-inch drivers\u003c\/strong\u003e — Two 10-inch cone drivers produce output comparable to larger single-driver subwoofers from a narrow cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile installation depth\u003c\/strong\u003e — The slanted connector panel enables flush wall mounting with only 12 inches of depth including connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard two-channel Class D amplifier delivers 1800 W peak total with crossover and driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-distortion port design\u003c\/strong\u003e — The low air-velocity port, derived from the 1100-LFC, provides clean, low-distortion output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligent AC power supply\u003c\/strong\u003e — Automatic voltage selection, EMI filtering, soft current turn-on, and surge suppression are built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM8 mounting points\u003c\/strong\u003e — Top and bottom M8 threads accept the optional U-bracket for wall or ceiling mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Provides discreet low-frequency reinforcement for sanctuaries and covered exterior gathering areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low end for speech and music in performance and assembly spaces, including exposed structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment space\u003c\/strong\u003e — Delivers durable low-frequency output for covered exterior briefing and assembly areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible AV program material where weather resistance is required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30–140 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e32–123 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40–123 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e126 dB with crest factor \u0026gt;11.5 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360° (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducers\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 10-inch cone drivers, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e2-channel Class D with crossover, 1800 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz, powerCON 20 with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 12.00 in x H 41.33 in x D 12.00 in (304.8 x 1049.8 x 304.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e56 lb (25.40 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium birch plywood, textured black finish, weather protected; stamped-steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and bottom M8 threaded mounting points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the weather protection cover?\u003c\/strong\u003e The WP treatment is a factory option from Meyer Sound that allows the USW-210P to be installed in covered outdoor and semi-exposed locations. For full deployment guidance, consult the Meyer Sound weather protection documentation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat audio connection does this model use?\u003c\/strong\u003e This WP-3 model uses a 3-pin XLR female input with a male loop output for daisy-chaining multiple cabinets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the subwoofer mounted?\u003c\/strong\u003e It ships with M8 threaded points at the top and bottom for the optional U-bracket, and supports horizontal or vertical placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it integrate with other Meyer Sound loudspeakers?\u003c\/strong\u003e Yes. It is designed to complement Meyer Sound point-source and line-array systems for full-range installed sound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924529963244,"sku":"09.277.001.03","price":7060.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-210p-2x10-2-way-active-subwoofer-with-weather-protection-m8-3-pin-input-milan-creation-networks-53498.webp?v=1757941356"},{"product_id":"meyer-sound-usw-210p-us-std-m8-milan","title":"Meyer Sound USW-210P 2x10\" 2-Way Active Subwoofer, M8, 3-Pin Input (Milan) - 09.277.201.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound USW-210P (Milan) is a self-powered 2x10\" compact narrow subwoofer configured for networked installed sound systems, delivering convincing low-frequency impact from a slim, low-profile enclosure. Its dual 10-inch driver design produces output comparable to larger single-driver subwoofers while occupying a discreet footprint. This Milan-network-ready model suits houses of worship, conference rooms, broadcast and AV systems, and theatrical sound reinforcement where digital audio networking and visual discretion are priorities.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-210p-2x10-2-way-active-subwoofer-with-weather-protection-m8-3-pin-input-milan-creation-networks-53498.webp?v=1757941356\" alt=\"Meyer Sound USW-210P 2x10 inch active subwoofer Milan network\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe USW-210P houses a two-channel Class D power amplifier with onboard signal processing for driver protection, frequency correction, and phase correction. Its slanted connector panel allows the cabinet to flush-mount against wall surfaces, reducing the required installation depth to 12 inches including connectors. The slender bass-reflex enclosure employs the same low air-velocity port design found in Meyer Sound's flagship 1100-LFC low-frequency control element for high efficiency and low port distortion. This configuration integrates into Milan-network audio distribution and complements Meyer Sound point-source and line-array systems. For higher-output low end, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered subwoofer\u003c\/a\u003e, and browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e for matched systems.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilan network ready\u003c\/strong\u003e — Configured for Milan AVB audio distribution in networked installed sound systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-inch drivers\u003c\/strong\u003e — Two 10-inch cone drivers produce output comparable to larger single-driver subwoofers from a narrow cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile installation depth\u003c\/strong\u003e — The slanted connector panel enables flush wall mounting with only 12 inches of depth including connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard two-channel Class D amplifier delivers 1800 W peak total with crossover and driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-distortion port design\u003c\/strong\u003e — The low air-velocity port, derived from the 1100-LFC, provides clean, low-distortion output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligent AC power supply\u003c\/strong\u003e — Automatic voltage selection, EMI filtering, soft current turn-on, and surge suppression are built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM8 mounting points\u003c\/strong\u003e — Top and bottom M8 threads accept the optional U-bracket for wall or ceiling mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Adds discreet networked low-frequency reinforcement to sanctuary sound systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference room\u003c\/strong\u003e — Extends bass for program audio over a Milan network in a slim, wall-mountable form factor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast studio\u003c\/strong\u003e — Provides controlled low end within networked monitoring and playback environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low frequencies for speech and music in performance and assembly spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible, network-distributed AV program material.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30–140 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e32–123 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40–123 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e126 dB with crest factor \u0026gt;11.5 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360° (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducers\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 10-inch cone drivers, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e2-channel Class D with crossover, 1800 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz, powerCON 20 with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 12.00 in x H 41.33 in x D 12.00 in (304.8 x 1049.8 x 304.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e56 lb (25.40 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium birch plywood, textured black finish; stamped-steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and bottom M8 threaded mounting points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat makes this the Milan version?\u003c\/strong\u003e This USW-210P is configured for Milan AVB networked audio, allowing it to integrate into digital audio distribution systems alongside other Milan-capable Meyer Sound devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the USW-210P mounted?\u003c\/strong\u003e It ships with M8 threaded points at the top and bottom for the optional MUB-USW-210P U-bracket, and supports horizontal or vertical placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be installed flush against a wall?\u003c\/strong\u003e Yes. The slanted connector panel reduces installation depth to 12 inches including connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it integrate with other Meyer Sound loudspeakers?\u003c\/strong\u003e Yes. It is designed to complement Meyer Sound point-source and line-array systems for full-range installed sound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924544839916,"sku":"09.277.201.01","price":6410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-210p-2x10-2-way-active-subwoofer-with-weather-protection-m8-3-pin-input-milan-creation-networks-53498.webp?v=1757941356"},{"product_id":"meyer-sound-usw-210p-us-w-p-m8-milan","title":"Meyer Sound USW-210P 2x10\" 2-Way Active Subwoofer with Weather Protection, M8, 3-Pin Input (Milan) - 09.277.201.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound USW-210P with Weather Protection (Milan) is a self-powered 2x10\" compact narrow subwoofer that pairs networked Milan audio with factory weather protection for exposed installed sound applications. Its dual 10-inch driver design delivers low-frequency impact comparable to larger single-driver subwoofers from a slim, discreet enclosure suited to covered outdoor environments. This configuration is well matched to houses of worship, outdoor commercial AV systems, broadcast and live event installs, and architectural projects requiring durable, network-ready bass.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-210p-2x10-2-way-active-subwoofer-with-weather-protection-m8-3-pin-input-milan-creation-networks-53498.webp?v=1757941356\" alt=\"Meyer Sound USW-210P weather-protected 2x10 inch active subwoofer Milan\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis USW-210P combines a two-channel Class D power amplifier and onboard signal processing for driver protection, frequency correction, and phase correction with Meyer Sound weather protection and Milan network audio. Its slanted connector panel allows the cabinet to flush-mount against wall surfaces, reducing the required installation depth to 12 inches including connectors. The slender bass-reflex enclosure uses the same low air-velocity port design as Meyer Sound's flagship 1100-LFC low-frequency control element for high efficiency and low port distortion. The cabinet integrates into Milan-network audio distribution and complements Meyer Sound point-source and line-array systems. For an indoor standard configuration, compare the standard USW-210P, and for greater output review the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered subwoofer\u003c\/a\u003e or the wider \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilan network with weather protection\u003c\/strong\u003e — Combines Milan AVB audio distribution with factory weather-protection treatment for exposed installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-inch drivers\u003c\/strong\u003e — Two 10-inch cone drivers produce output comparable to larger single-driver subwoofers from a narrow cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile installation depth\u003c\/strong\u003e — The slanted connector panel enables flush wall mounting with only 12 inches of depth including connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard two-channel Class D amplifier delivers 1800 W peak total with crossover and driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-distortion port design\u003c\/strong\u003e — The low air-velocity port, derived from the 1100-LFC, provides clean, low-distortion output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligent AC power supply\u003c\/strong\u003e — Automatic voltage selection, EMI filtering, soft current turn-on, and surge suppression are built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM8 mounting points\u003c\/strong\u003e — Top and bottom M8 threads accept the optional U-bracket for wall or ceiling mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Provides discreet networked low-frequency reinforcement for sanctuaries and covered exterior areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast studio\u003c\/strong\u003e — Delivers controlled low end within networked monitoring and playback environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low frequencies for speech and music in performance and assembly spaces, including exposed structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment space\u003c\/strong\u003e — Supplies durable, network-ready low-frequency output for covered exterior briefing and assembly areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30–140 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e32–123 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40–123 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e126 dB with crest factor \u0026gt;11.5 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360° (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducers\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 10-inch cone drivers, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e2-channel Class D with crossover, 1800 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz, powerCON 20 with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 12.00 in x H 41.33 in x D 12.00 in (304.8 x 1049.8 x 304.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e56 lb (25.40 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium birch plywood, textured black finish, weather protected; stamped-steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and bottom M8 threaded mounting points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does this configuration combine?\u003c\/strong\u003e It pairs Milan AVB networked audio with factory weather-protection treatment, suiting covered outdoor and semi-exposed installations on a digital audio network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the subwoofer mounted?\u003c\/strong\u003e It ships with M8 threaded points at the top and bottom for the optional U-bracket, and supports horizontal or vertical placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be installed flush against a wall?\u003c\/strong\u003e Yes. The slanted connector panel reduces installation depth to 12 inches including connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it integrate with other Meyer Sound loudspeakers?\u003c\/strong\u003e Yes. It is designed to complement Meyer Sound point-source and line-array systems on a Milan network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924546543852,"sku":"09.277.201.02","price":7740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-210p-2x10-2-way-active-subwoofer-with-weather-protection-m8-3-pin-input-milan-creation-networks-53498.webp?v=1757941356"},{"product_id":"meyer-sound-usw-112p-1x12-2-way-active-subwoofer","title":"Meyer Sound USW-112P 1x12\" 2-Way Active Subwoofer - 09.298.001.03","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound USW-112P is a self-powered 1x12\" compact narrow subwoofer that delivers substantial low-frequency output from a tight, discreet footprint for installed sound applications. Designed as the ideal low-frequency companion to the ULTRA-X20 and other Meyer Sound loudspeakers, this analog model extends bass for houses of worship, conference rooms, retail and theater spaces, and multi-purpose AV systems. Its single 12-inch driver and slim enclosure make it a practical choice where space and aesthetics are constrained.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-112xpwp-1200w-12-inch-powered-subwoofer-weather-proctection-creation-networks-48033.webp?v=1757941376\" alt=\"Meyer Sound USW-112P 1x12 inch active subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe USW-112P houses an open-loop Class D power amplifier rated at 1200 W peak, with onboard signal processing for frequency correction, phase correction, and driver protection. Its compact rectangular enclosure and slanted connector panel allow flush wall mounting, reducing the required installation depth to 12 inches including connectors. The bass-reflex cabinet uses a low-velocity port for high efficiency and low port distortion. This analog version accepts balanced audio over a 3-pin XLR female input with male loop output and supports the optional RMS remote monitoring module. The cabinet integrates Meyer Sound's Intelligent AC power supply for automatic voltage selection and surge suppression. For a larger dual-driver subwoofer, compare the USW-210P 2x10\" model, and browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e for matched systems at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 12-inch driver\u003c\/strong\u003e — One 12-inch cone driver delivers high power-to-size low-frequency output in a compact cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile installation depth\u003c\/strong\u003e — The slanted connector panel enables flush wall mounting with only 12 inches of depth including connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An open-loop Class D amplifier delivers 1200 W peak with onboard correction and driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-distortion port design\u003c\/strong\u003e — A low air-velocity port provides clean, low-distortion bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible orientation\u003c\/strong\u003e — The cabinet can be placed horizontally or vertically to suit installation requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligent AC power supply\u003c\/strong\u003e — Provides automatic voltage selection, EMI filtering, soft-start, and surge suppression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile rigging\u003c\/strong\u003e — Two M8 threaded points plus a 35 mm pole mount with M20 thread accept the optional U-bracket for wall, ceiling, or truss mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional RMS monitoring\u003c\/strong\u003e — Supports the optional RMS remote monitoring module for parameter reporting via Compass software.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Adds discreet low-frequency reinforcement to sanctuary sound systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference room\u003c\/strong\u003e — Extends bass for presentation and program audio in a slim, wall-mountable enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Provides flexible low-frequency support for varied AV program material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low end for speech and music in performance and assembly spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTraining room\u003c\/strong\u003e — Supplies controlled bass extension for instructional AV playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–140 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e36–125 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e45–120 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e123 dB with \u0026gt;10.5 dB crest factor (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360° (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 12-inch cone driver, 3 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOpen-loop Class D, 1200 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz, powerCON 20 with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 13.5 in x H 23.5 in x D 12 in (343 x 597 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e45 lb (20 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish; round-perforated steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo M8 points; 35 mm pole mount with M20 thread; optional U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat audio connection does this model use?\u003c\/strong\u003e This analog USW-112P uses a 3-pin XLR female input with a male loop output, with an optional 5-pin XLR available to carry both balanced audio and RMS signals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the USW-112P mounted?\u003c\/strong\u003e It includes two M8 threaded points and a 35 mm pole mount with M20 thread, and accepts the optional MUB-USW-112 U-bracket for wall, ceiling, or truss mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat loudspeakers does it pair with?\u003c\/strong\u003e It is designed as the low-frequency companion to the ULTRA-X20 and also complements the UP-4slim and UPM-family loudspeakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan its parameters be monitored remotely?\u003c\/strong\u003e Yes. The analog version supports the optional RMS remote monitoring module for reporting amplifier parameters via Compass control software.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924575084780,"sku":"09.298.001.03","price":4800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-112xpwp-1200w-12-inch-powered-subwoofer-weather-proctection-creation-networks-48033.webp?v=1757941376"},{"product_id":"meyer-sound-usw-112p-us-std-pwrcon-top-rms-milan","title":"Meyer Sound USW-112P Compact Subwoofer, RMS, MILAN AVB - 09.298.201.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound USW-112P Compact Subwoofer with Milan AVB is a self-powered 1x12\" subwoofer configured for networked installed sound, delivering substantial low-frequency output from a discreet, space-saving enclosure. This Milan-Certified digital version provides integrated remote monitoring and networked audio over an etherCON connection. It suits houses of worship, conference rooms, broadcast studios, and multi-purpose AV systems where digital audio distribution and visual discretion are priorities.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-112xpwp-1200w-12-inch-powered-subwoofer-weather-proctection-creation-networks-48033.webp?v=1757941376\" alt=\"Meyer Sound USW-112P Milan AVB compact subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis USW-112P digital version houses an open-loop Class D power amplifier rated at 1200 W peak with onboard frequency correction, phase correction, and driver protection. The Milan-Certified network interface uses an etherCON TOP connector and powerCON TRUE1 TOP power, providing integrated loudspeaker monitoring directly through Compass control software. Its compact rectangular enclosure and slanted connector panel allow flush wall mounting at only 12 inches of depth including connectors, and the bass-reflex cabinet uses a low-velocity port for high efficiency and low port distortion. As the ideal low-frequency companion to the ULTRA-X20, it also complements the UP-4slim and UPM-family loudspeakers. For an analog configuration, compare the standard USW-112P, and browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilan AVB network\u003c\/strong\u003e — Milan-Certified digital audio over etherCON TOP for networked installed sound systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated monitoring\u003c\/strong\u003e — The digital version provides integrated loudspeaker monitoring via Compass control software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 12-inch driver\u003c\/strong\u003e — One 12-inch cone driver delivers high power-to-size low-frequency output in a compact cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An open-loop Class D amplifier delivers 1200 W peak with onboard correction and driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile installation depth\u003c\/strong\u003e — The slanted connector panel enables flush wall mounting at only 12 inches including connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epowerCON TRUE1 TOP power\u003c\/strong\u003e — The digital version uses powerCON TRUE1 TOP with loop output for AC distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile rigging\u003c\/strong\u003e — Two M8 threaded points plus a 35 mm pole mount with M20 thread accept the optional U-bracket for wall, ceiling, or truss mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Adds discreet networked low-frequency reinforcement to sanctuary sound systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference room\u003c\/strong\u003e — Extends bass for program audio over a Milan network in a slim, wall-mountable enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast studio\u003c\/strong\u003e — Provides controlled, network-distributed low end for monitoring and playback environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible, networked AV program material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low end for speech and music in performance and assembly spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–140 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e36–125 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e45–120 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e123 dB with \u0026gt;10.5 dB crest factor (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360° (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 12-inch cone driver, 3 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOpen-loop Class D, 1200 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eetherCON TOP (Milan Certified digital)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz, powerCON TRUE1 TOP with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 13.5 in x H 23.5 in x D 12 in (343 x 597 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e45 lb (20 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish; round-perforated steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo M8 points; 35 mm pole mount with M20 thread; optional U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat network protocol does this model use?\u003c\/strong\u003e This is the Milan-Certified digital version, carrying networked audio over an etherCON TOP connector for integration into Milan AVB systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is monitoring handled?\u003c\/strong\u003e The digital version provides integrated loudspeaker monitoring directly through Compass control software, without a separate RMS module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the USW-112P mounted?\u003c\/strong\u003e It includes two M8 threaded points and a 35 mm pole mount with M20 thread, and accepts the optional MUB-USW-112 U-bracket for wall, ceiling, or truss mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat loudspeakers does it pair with?\u003c\/strong\u003e It is designed as the low-frequency companion to the ULTRA-X20 and also complements the UP-4slim and UPM-family loudspeakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924580393196,"sku":"09.298.201.01","price":5650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-112xpwp-1200w-12-inch-powered-subwoofer-weather-proctection-creation-networks-48033.webp?v=1757941376"},{"product_id":"meyer-sound-usw-112p-us-w-p-3pin","title":"Meyer Sound USW-112P\/WP 12\" Compact Narrow Subwoofer, Weather Proof - 09.298.001.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound USW-112P\/WP is a weather-protected 1x12\" compact narrow subwoofer that brings substantial low-frequency output to covered outdoor and semi-exposed installed sound applications. This weather-proof analog model carries an IP54 rating with the rain hood installed and delivers discreet bass from a slim enclosure suited to houses of worship, outdoor commercial AV systems, and architectural installs. Its single 12-inch driver and compact form factor make it practical where both durability and visual discretion matter.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-112xpwp-1200w-12-inch-powered-subwoofer-weather-proctection-creation-networks-48033.webp?v=1757941376\" alt=\"Meyer Sound USW-112P\/WP weather-protected 12 inch subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe USW-112P\/WP houses an open-loop Class D power amplifier rated at 1200 W peak with onboard frequency correction, phase correction, and driver protection, and adds Meyer Sound weather protection for exposed locations. Weather-protected units use 3-pin XLR TOP (Total Outdoor Protection) connectors and powerCON TRUE1 TOP power. The compact rectangular enclosure and slanted connector panel allow flush wall mounting at only 12 inches of depth including connectors, and the bass-reflex cabinet uses a low-velocity port for high efficiency and low distortion. As the low-frequency companion to the ULTRA-X20, it complements the UP-4slim and UPM-family loudspeakers. For an indoor analog configuration, compare the standard USW-112P, and browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather protection (IP54)\u003c\/strong\u003e — Rated IP54 with the rain hood properly installed for covered outdoor and semi-exposed environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTOP connectors\u003c\/strong\u003e — Uses 3-pin XLR TOP audio and powerCON TRUE1 TOP power connectors for outdoor durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 12-inch driver\u003c\/strong\u003e — One 12-inch cone driver delivers high power-to-size low-frequency output in a compact cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An open-loop Class D amplifier delivers 1200 W peak with onboard correction and driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile installation depth\u003c\/strong\u003e — The slanted connector panel enables flush wall mounting at only 12 inches including connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-distortion port design\u003c\/strong\u003e — A low air-velocity port provides clean, low-distortion bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile rigging\u003c\/strong\u003e — Two M8 threaded points plus a 35 mm pole mount with M20 thread accept the optional U-bracket for wall, ceiling, or truss mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Provides discreet low-frequency reinforcement for sanctuaries and covered exterior gathering areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low end for speech and music in performance and assembly spaces, including exposed structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible AV program material where weather resistance is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment space\u003c\/strong\u003e — Delivers durable low-frequency output for covered exterior briefing and assembly areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–140 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e36–125 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e45–120 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e123 dB with \u0026gt;10.5 dB crest factor (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360° (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 12-inch cone driver, 3 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOpen-loop Class D, 1200 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR TOP (weather-protected)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz, powerCON TRUE1 TOP with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIP54 with rain hood installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 13.5 in x H 23.5 in x D 12 in (343 x 597 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e45 lb (20 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish, weather protected; round-perforated steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo M8 points; 35 mm pole mount with M20 thread; optional U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weather rating?\u003c\/strong\u003e The weather-protected version is rated IP54 with the rain hood properly installed, suiting it for covered outdoor and semi-exposed locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connectors does this model use?\u003c\/strong\u003e Weather-protected units use 3-pin XLR TOP audio connectors and powerCON TRUE1 TOP power connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the USW-112P\/WP mounted?\u003c\/strong\u003e It includes two M8 threaded points and a 35 mm pole mount with M20 thread, and accepts the optional MUB-USW-112 U-bracket for wall, ceiling, or truss mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat loudspeakers does it pair with?\u003c\/strong\u003e It is designed as the low-frequency companion to the ULTRA-X20 and complements the UP-4slim and UPM-family loudspeakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924580622572,"sku":"09.298.001.04","price":5650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-112xpwp-1200w-12-inch-powered-subwoofer-weather-proctection-creation-networks-48033.webp?v=1757941376"},{"product_id":"meyer-sound-usw-112p-us-w-p-pwrcon-top-rms-milan","title":"Meyer Sound USW-112XP\/WP 1200W 12-inch Powered Subwoofer, Weather Proctection - 09.298.201.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound USW-112XP\/WP is a weather-protected IntelligentDC 1x12\" compact narrow subwoofer that delivers low-frequency reinforcement to covered outdoor and semi-exposed installed sound systems while drawing both DC power and balanced audio over a single cable. Rated IP54 with the rain hood installed, this externally powered model is the ideal low-frequency companion to the ULTRA-X20XP and is suited to houses of worship, outdoor commercial AV systems, and architectural installs requiring conduit-free, low-voltage distribution.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-112xpwp-1200w-12-inch-powered-subwoofer-weather-proctection-creation-networks-48033.webp?v=1757941376\" alt=\"Meyer Sound USW-112XP\/WP weather-protected IntelligentDC subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe USW-112XP\/WP houses an open-loop Class D power amplifier rated at 600 W peak with onboard correction filters for phase and frequency response and driver protection. With IntelligentDC technology, it receives 48 V DC power and balanced audio from a single Phoenix 5-pin connector fed by a Meyer Sound MPS IntelligentDC power supply (MPS-482HP or MPS-488HP required), eliminating wiring conduits while preserving the advantages of self-powered systems. Its compact rectangular enclosure and slanted connector panel allow flush wall mounting at only 12 inches of depth including connectors, and the bass-reflex cabinet uses a low-velocity port based on the USW-210P design for high efficiency and low port distortion. For an AC-powered configuration, compare the USW-112P, and browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC power and audio\u003c\/strong\u003e — Receives 48 V DC power and balanced audio over a single Phoenix 5-pin connector from a Meyer Sound MPS power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather protection (IP54)\u003c\/strong\u003e — Rated IP54 with the rain hood properly installed for covered outdoor and semi-exposed environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConduit-free distribution\u003c\/strong\u003e — Composite cabling carries power and audio up to 150 feet with about 1 dB of loss using 18 AWG power wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 12-inch driver\u003c\/strong\u003e — A proprietary high-excursion 12-inch cone driver delivers high power-to-size low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An open-loop Class D amplifier delivers 600 W peak with onboard correction and driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile installation depth\u003c\/strong\u003e — The slanted connector panel enables flush wall mounting at only 12 inches including connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile rigging\u003c\/strong\u003e — Two M8 threaded points plus a 35 mm pole mount with M20 thread accept the optional U-bracket for wall, ceiling, or truss mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Provides discreet, conduit-free low-frequency reinforcement for sanctuaries and covered exterior areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low end for speech and music in performance and assembly spaces, including exposed structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible AV program material with low-voltage distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment space\u003c\/strong\u003e — Delivers durable, low-voltage low-frequency output for covered exterior briefing and assembly areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–140 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e36–125 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e45–120 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e119.5 dB with \u0026gt;10 dB crest factor (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360° (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 12-inch cone driver, 3 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOpen-loop Class D, 600 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eConnector\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhoenix 5-pin male (DC power and balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePower\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC via Meyer Sound MPS-482HP or MPS-488HP power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIP54 with rain hood installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 13.5 in x H 23.5 in x D 12 in (343 x 597 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 lb (19.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish; round-perforated steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo M8 points; 35 mm pole mount with M20 thread; optional U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow is the USW-112XP\/WP powered?\u003c\/strong\u003e It uses IntelligentDC technology, receiving 48 V DC power and balanced audio over a single Phoenix 5-pin connector from a Meyer Sound MPS-482HP or MPS-488HP IntelligentDC power supply, which is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weather rating?\u003c\/strong\u003e The weather-protected version is rated IP54 with the rain hood properly installed for covered outdoor and semi-exposed locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far can the cable run?\u003c\/strong\u003e Composite multi-conductor cable can deliver power and audio up to 150 feet with approximately 1 dB of peak SPL loss using 18 AWG power wiring; longer runs are possible with heavier gauge wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat loudspeakers does it pair with?\u003c\/strong\u003e It is designed as the low-frequency companion to the ULTRA-X20XP and complements the UP-4slim and UPM-family loudspeakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924581277932,"sku":"09.298.201.02","price":6320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-112xpwp-1200w-12-inch-powered-subwoofer-weather-proctection-creation-networks-48033.webp?v=1757941376"},{"product_id":"meyer-sound-mm-10ac-10-active-subwoofer-3-pin-input","title":"Meyer Sound MM-10AC 10\" Active Subwoofer, 3-Pin Input - 09.199.012.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MM-10AC is an AC-powered 10\" miniature subwoofer that adds discreet low-frequency extension to compact installed sound systems built around small-format Meyer Sound loudspeakers. With a single 10-inch driver in a low-profile cabinet, this 3-pin XLR model suits houses of worship, conference rooms, retail and hospitality spaces, and multi-purpose AV systems where a full-size subwoofer would be impractical. It provides a self-contained, mains-powered bass solution with onboard amplification and processing.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985\" alt=\"Meyer Sound MM-10AC 10 inch active subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MM-10AC houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection. This AC model accepts balanced audio over a 3-pin XLR female input with an XLR male loop output for daisy-chaining, and uses a powerCON 20 AC connector with loop output. An input polarity switch allows the audio polarity to be reversed between pins 2 and 3, and an Intelligent AC supply provides automatic voltage selection from 90 to 265 V AC. The compact birch enclosure carries top and side nut plates for mounting and accepts the optional MUB-MM10 U-bracket. As a miniature subwoofer, the MM-10AC complements small Meyer Sound systems where the larger USW-112P would not fit. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks for matched loudspeakers.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC-powered design\u003c\/strong\u003e — Self-contained mains operation with an Intelligent AC supply and automatic voltage selection from 90 to 265 V AC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-inch driver\u003c\/strong\u003e — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-pin XLR with loop\u003c\/strong\u003e — Balanced audio input on a 3-pin XLR female connector with an XLR male loop output for daisy-chaining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard Class D amplifier delivers 440 W peak with driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput polarity switch\u003c\/strong\u003e — Reverses audio input polarity between pins 2 and 3 for system alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact enclosure\u003c\/strong\u003e — Premium multi-ply birch cabinet measuring 19 x 11 x 12 inches for discreet placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rigging\u003c\/strong\u003e — Top and side nut plates with 3\/8-inch or M10 threads accept the optional MUB-MM10 U-bracket for wall or ceiling mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Adds discreet low-frequency support to compact sanctuary sound systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference room\u003c\/strong\u003e — Extends bass for program audio in a miniature, easily concealed form factor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Provides flexible low-frequency support for varied small-format AV systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTraining room\u003c\/strong\u003e — Supplies controlled bass extension for instructional AV playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33–228 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–208 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38–138 Hz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;11 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 10-inch cone driver, 2-inch voice coil, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass D, 440 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR female input with XLR male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz; auto voltage selection 90–265 V AC; powerCON 20 with loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 19 in x H 11 in x D 12 in (483 x 279 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.2 lb (12.79 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish; hex-stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and side nut plates, 3\/8-inch or M10 threads; optional MUB-MM10 U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow is the MM-10AC powered?\u003c\/strong\u003e It is AC-powered with an Intelligent AC supply, accepting 100–240 V AC over a powerCON 20 connector with loop output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat audio connection does it use?\u003c\/strong\u003e This AC model uses a 3-pin XLR female input with an XLR male loop output for daisy-chaining, plus an input polarity switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e It has top and side nut plates with 3\/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat loudspeakers does it pair with?\u003c\/strong\u003e As a miniature subwoofer, it is intended to extend the low end of compact Meyer Sound loudspeaker systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924582555884,"sku":"09.199.012.01","price":3330.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985"},{"product_id":"meyer-sound-mm-10ac-w-p-m10-powercon-us","title":"Meyer Sound MM-10AC-WP-3 10\" Active Subwoofer with Weather Protection, 3-Pin Input - 09.199.012.11","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MM-10AC-WP-3 is a weather-protected, AC-powered 10\" miniature subwoofer that brings discreet low-frequency extension to compact installed sound systems in covered outdoor and semi-exposed locations. With a single 10-inch driver in a low-profile cabinet and a 3-pin XLR input, this weather-protected model suits houses of worship, outdoor hospitality and retail spaces, and architectural AV installs where space, durability, and visual discretion all matter.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985\" alt=\"Meyer Sound MM-10AC-WP-3 weather-protected miniature subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MM-10AC-WP-3 houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection, and adds Meyer Sound weather protection for exposed environments. It accepts balanced audio over a 3-pin XLR female input with an XLR male loop output for daisy-chaining and uses a powerCON 20 AC connector with loop output. An input polarity switch reverses audio polarity between pins 2 and 3, and the Intelligent AC supply provides automatic voltage selection from 90 to 265 V AC. The compact birch enclosure carries top and side nut plates and accepts the optional MUB-MM10 U-bracket. For an indoor configuration, compare the standard MM-10AC, and browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather protection\u003c\/strong\u003e — Factory weather-protection treatment allows installation in covered outdoor and semi-exposed environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC-powered design\u003c\/strong\u003e — Self-contained mains operation with an Intelligent AC supply and automatic voltage selection from 90 to 265 V AC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-inch driver\u003c\/strong\u003e — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-pin XLR with loop\u003c\/strong\u003e — Balanced audio input on a 3-pin XLR female connector with an XLR male loop output for daisy-chaining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard Class D amplifier delivers 440 W peak with driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput polarity switch\u003c\/strong\u003e — Reverses audio input polarity between pins 2 and 3 for system alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rigging\u003c\/strong\u003e — Top and side nut plates with 3\/8-inch or M10 threads accept the optional MUB-MM10 U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Provides discreet low-frequency support for sanctuaries and covered exterior gathering areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible small-format AV systems where weather resistance is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low end for speech and music in performance and assembly spaces, including exposed structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment space\u003c\/strong\u003e — Delivers durable low-frequency output for covered exterior briefing and assembly areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33–228 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–208 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38–138 Hz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;11 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 10-inch cone driver, 2-inch voice coil, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass D, 440 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR female input with XLR male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz; auto voltage selection 90–265 V AC; powerCON 20 with loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 19 in x H 11 in x D 12 in (483 x 279 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.2 lb (12.79 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish, weather protected; hex-stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and side nut plates, 3\/8-inch or M10 threads; optional MUB-MM10 U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the weather protection cover?\u003c\/strong\u003e The WP treatment is a factory option that allows the MM-10AC to be installed in covered outdoor and semi-exposed locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e It is AC-powered with an Intelligent AC supply, accepting 100–240 V AC over a powerCON 20 connector with loop output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat audio connection does it use?\u003c\/strong\u003e This WP-3 model uses a 3-pin XLR female input with an XLR male loop output for daisy-chaining.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e It has top and side nut plates with 3\/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924584161516,"sku":"09.199.012.11","price":4250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985"},{"product_id":"meyer-sound-mm-10acx-10-active-subwoofer-3-pin-input","title":"Meyer Sound MM-10ACX 10\" Active Subwoofer, 3-Pin Input - 09.199.013.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MM-10ACX is an AC-powered 10\" miniature subwoofer with integrated satellite outputs, designed to anchor compact installed sound systems built around small-format Meyer Sound IntelligentDC loudspeakers. This 3-pin XLR model powers and feeds connected MM-4XP-class satellites directly, creating a self-contained sub-satellite package for houses of worship, conference and huddle rooms, retail and hospitality spaces, and multi-purpose AV systems where space is limited.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985\" alt=\"Meyer Sound MM-10ACX 10 inch active subwoofer with satellite outputs\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MM-10ACX houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection. Beyond the subwoofer itself, it provides two XLR female satellite inputs and two IntelligentDC satellite outputs (Phoenix or EN3 5-pin), distributing DC power and balanced audio to connected satellite loudspeakers such as the MM-4XP. A gain knob adjusts the subwoofer level from fully attenuated to +10 dB, and an input select switch determines whether the sub draws its signal from the subwoofer input or the summed satellite inputs. This 3-pin XLR version uses a powerCON 20 AC connector with loop output. As a miniature sub-satellite hub, the MM-10ACX complements small Meyer Sound systems where the larger USW-112P would not fit. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated satellite power\u003c\/strong\u003e — Two IntelligentDC outputs (Phoenix or EN3 5-pin) distribute DC power and balanced audio to satellite loudspeakers such as the MM-4XP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite inputs\u003c\/strong\u003e — Two XLR female satellite inputs feed connected satellites and can be summed to the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain control\u003c\/strong\u003e — A gain knob adjusts the subwoofer signal from completely attenuated to +10 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput select switch\u003c\/strong\u003e — Selects whether the subwoofer takes its signal from the subwoofer input or the summed satellite inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-inch driver\u003c\/strong\u003e — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard Class D amplifier delivers 440 W peak with driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC-powered design\u003c\/strong\u003e — Intelligent AC supply with automatic voltage selection from 90 to 265 V AC and a powerCON 20 connector with loop output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rigging\u003c\/strong\u003e — Top and side nut plates with 3\/8-inch or M10 threads accept the optional MUB-MM10 U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Anchors a discreet sub-satellite system for compact sanctuary sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHuddle room\u003c\/strong\u003e — Provides a complete low-profile sub-satellite package for small collaboration spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference room\u003c\/strong\u003e — Powers and feeds satellite loudspeakers for full-range program audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible small-format AV systems from a single powered hub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTraining room\u003c\/strong\u003e — Delivers controlled bass and satellite distribution for instructional AV playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33–228 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–208 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38–138 Hz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;11 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 10-inch cone driver, 2-inch voice coil, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass D, 440 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR female subwoofer input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSatellite Connectors\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo XLR female inputs; two Phoenix or EN3 5-pin IntelligentDC outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz; auto voltage selection 90–265 V AC; powerCON 20 with loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 19 in x H 11 in x D 12 in (483 x 279 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30.8 lb (13.97 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish; hex-stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and side nut plates, 3\/8-inch or M10 threads; optional MUB-MM10 U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow does the MM-10ACX differ from the MM-10AC?\u003c\/strong\u003e The ACX version adds two XLR satellite inputs, two IntelligentDC satellite outputs, a gain knob, and an input select switch, letting it power and feed satellite loudspeakers directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat satellite loudspeakers can it power?\u003c\/strong\u003e Its IntelligentDC outputs are designed to power and feed Meyer Sound IntelligentDC satellites such as the MM-4XP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat audio connection does this model use?\u003c\/strong\u003e This 3-pin version uses a 3-pin XLR female subwoofer input plus the satellite input and output connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e It has top and side nut plates with 3\/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924588912876,"sku":"09.199.013.01","price":3850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985"},{"product_id":"meyer-sound-mm-10acx-std-m10-powercon-us-phoenix","title":"Meyer Sound MM-10ACX-5 10\" Active Subwoofer, 5-Pin Input - 09.199.014.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MM-10ACX-5 is an AC-powered 10\" miniature subwoofer with integrated satellite outputs, configured with 5-pin Phoenix satellite connectors for compact installed sound systems built around small-format Meyer Sound IntelligentDC loudspeakers. It powers and feeds connected MM-4XP-class satellites directly, forming a self-contained sub-satellite package for houses of worship, conference and huddle rooms, retail and hospitality spaces, and multi-purpose AV systems where space is at a premium.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985\" alt=\"Meyer Sound MM-10ACX-5 10 inch active subwoofer with 5-pin satellite outputs\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MM-10ACX-5 houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection. It provides two XLR female satellite inputs and two IntelligentDC satellite outputs on 5-pin Phoenix connectors, distributing DC power and balanced audio to connected satellite loudspeakers such as the MM-4XP. A gain knob adjusts the subwoofer level from fully attenuated to +10 dB, and an input select switch determines whether the sub draws its signal from the subwoofer input or the summed satellite inputs. AC power is supplied through a powerCON 20 connector with loop output. As a miniature sub-satellite hub, the MM-10ACX-5 complements small Meyer Sound systems where the larger USW-112P would not fit. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-pin Phoenix satellite outputs\u003c\/strong\u003e — Two IntelligentDC outputs on 5-pin Phoenix connectors distribute DC power and balanced audio to satellite loudspeakers such as the MM-4XP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite inputs\u003c\/strong\u003e — Two XLR female satellite inputs feed connected satellites and can be summed to the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain control\u003c\/strong\u003e — A gain knob adjusts the subwoofer signal from completely attenuated to +10 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput select switch\u003c\/strong\u003e — Selects whether the subwoofer takes its signal from the subwoofer input or the summed satellite inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-inch driver\u003c\/strong\u003e — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard Class D amplifier delivers 440 W peak with driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC-powered design\u003c\/strong\u003e — Intelligent AC supply with automatic voltage selection from 90 to 265 V AC and a powerCON 20 connector with loop output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rigging\u003c\/strong\u003e — Top and side nut plates with 3\/8-inch or M10 threads accept the optional MUB-MM10 U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Anchors a discreet sub-satellite system for compact sanctuary sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHuddle room\u003c\/strong\u003e — Provides a complete low-profile sub-satellite package for small collaboration spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference room\u003c\/strong\u003e — Powers and feeds satellite loudspeakers for full-range program audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible small-format AV systems from a single powered hub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTraining room\u003c\/strong\u003e — Delivers controlled bass and satellite distribution for instructional AV playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33–228 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–208 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38–138 Hz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;11 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 10-inch cone driver, 2-inch voice coil, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass D, 440 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR female subwoofer input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSatellite Connectors\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo XLR female inputs; two 5-pin Phoenix IntelligentDC outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz; auto voltage selection 90–265 V AC; powerCON 20 with loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 19 in x H 11 in x D 12 in (483 x 279 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30.8 lb (13.97 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish; hex-stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and side nut plates, 3\/8-inch or M10 threads; optional MUB-MM10 U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat distinguishes the MM-10ACX-5?\u003c\/strong\u003e This configuration provides its IntelligentDC satellite outputs on 5-pin Phoenix connectors for distributing DC power and balanced audio to connected satellites.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat satellite loudspeakers can it power?\u003c\/strong\u003e Its IntelligentDC outputs are designed to power and feed Meyer Sound IntelligentDC satellites such as the MM-4XP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat additional controls does it offer?\u003c\/strong\u003e It includes a gain knob (fully attenuated to +10 dB) and an input select switch for choosing the subwoofer or summed satellite inputs as the source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e It has top and side nut plates with 3\/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924590158060,"sku":"09.199.014.01","price":3850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985"},{"product_id":"meyer-sound-mm-10acx-w-p-m10-powercon-us-en3","title":"Meyer Sound MM-10ACX-WP-3 10\" Active Subwoofer with Weather Protection, 3-Pin Input - 09.199.013.11","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MM-10ACX-WP-3 is a weather-protected, AC-powered 10\" miniature subwoofer with integrated satellite outputs, configured with EN3 satellite connectors for compact installed sound systems in covered outdoor and semi-exposed locations. It powers and feeds connected Meyer Sound IntelligentDC satellites directly while withstanding the elements, making it well suited to houses of worship, outdoor hospitality and retail spaces, and architectural AV installs requiring a durable, low-profile sub-satellite package.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985\" alt=\"Meyer Sound MM-10ACX-WP-3 weather-protected subwoofer with satellite outputs\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MM-10ACX-WP-3 houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection, and adds Meyer Sound weather protection for exposed environments. It provides two XLR female satellite inputs and two IntelligentDC satellite outputs (EN3 5-pin), distributing DC power and balanced audio to connected satellite loudspeakers such as the MM-4XP. A gain knob adjusts the subwoofer level from fully attenuated to +10 dB, and an input select switch determines whether the sub draws its signal from the subwoofer input or the summed satellite inputs. AC power is supplied through a powerCON 20 connector with loop output. For an indoor configuration, compare the standard MM-10ACX, and browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather protection\u003c\/strong\u003e — Factory weather-protection treatment allows installation in covered outdoor and semi-exposed environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 satellite outputs\u003c\/strong\u003e — Two IntelligentDC outputs on EN3 5-pin connectors distribute DC power and balanced audio to satellite loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite inputs\u003c\/strong\u003e — Two XLR female satellite inputs feed connected satellites and can be summed to the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain control\u003c\/strong\u003e — A gain knob adjusts the subwoofer signal from completely attenuated to +10 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput select switch\u003c\/strong\u003e — Selects whether the subwoofer takes its signal from the subwoofer input or the summed satellite inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-inch driver\u003c\/strong\u003e — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard Class D amplifier delivers 440 W peak with driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rigging\u003c\/strong\u003e — Top and side nut plates with 3\/8-inch or M10 threads accept the optional MUB-MM10 U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Anchors a discreet, weather-resistant sub-satellite system for sanctuaries and covered exterior areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible small-format AV systems where weather resistance is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low end for speech and music in performance and assembly spaces, including exposed structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment space\u003c\/strong\u003e — Delivers durable low-frequency output and satellite distribution for covered exterior briefing areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33–228 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–208 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38–138 Hz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;11 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 10-inch cone driver, 2-inch voice coil, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass D, 440 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR female subwoofer input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSatellite Connectors\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo XLR female inputs; two EN3 5-pin IntelligentDC outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz; auto voltage selection 90–265 V AC; powerCON 20 with loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 19 in x H 11 in x D 12 in (483 x 279 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30.8 lb (13.97 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish, weather protected; hex-stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and side nut plates, 3\/8-inch or M10 threads; optional MUB-MM10 U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the weather protection cover?\u003c\/strong\u003e The WP treatment is a factory option that allows the MM-10ACX to be installed in covered outdoor and semi-exposed locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat satellite connector does this model use?\u003c\/strong\u003e This WP-3 configuration provides its IntelligentDC satellite outputs on EN3 5-pin connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat satellite loudspeakers can it power?\u003c\/strong\u003e Its IntelligentDC outputs are designed to power and feed Meyer Sound IntelligentDC satellites such as the MM-4XP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e It has top and side nut plates with 3\/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924590354668,"sku":"09.199.013.11","price":4760.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985"},{"product_id":"meyer-sound-mm-10acx-w-p-m10-powercon-us-phoenix","title":"Meyer Sound MM-10ACX-WP-5 10\" Active Subwoofer with Weather Protection, 5-Pin Input - 09.199.014.11","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MM-10ACX-WP-5 is a weather-protected, AC-powered 10\" miniature subwoofer with integrated satellite outputs, configured with 5-pin Phoenix satellite connectors for compact installed sound systems in covered outdoor and semi-exposed locations. It powers and feeds connected Meyer Sound IntelligentDC satellites directly while withstanding the elements, suiting houses of worship, outdoor hospitality and retail spaces, and architectural AV installs that require a durable, low-profile sub-satellite package.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985\" alt=\"Meyer Sound MM-10ACX-WP-5 weather-protected subwoofer with 5-pin satellite outputs\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MM-10ACX-WP-5 houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection, and adds Meyer Sound weather protection for exposed environments. It provides two XLR female satellite inputs and two IntelligentDC satellite outputs on 5-pin Phoenix connectors, distributing DC power and balanced audio to connected satellite loudspeakers such as the MM-4XP. A gain knob adjusts the subwoofer level from fully attenuated to +10 dB, and an input select switch determines whether the sub draws its signal from the subwoofer input or the summed satellite inputs. AC power is supplied through a powerCON 20 connector with loop output. For an indoor configuration, compare the standard MM-10ACX, and browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather protection\u003c\/strong\u003e — Factory weather-protection treatment allows installation in covered outdoor and semi-exposed environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-pin Phoenix satellite outputs\u003c\/strong\u003e — Two IntelligentDC outputs on 5-pin Phoenix connectors distribute DC power and balanced audio to satellite loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite inputs\u003c\/strong\u003e — Two XLR female satellite inputs feed connected satellites and can be summed to the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain control\u003c\/strong\u003e — A gain knob adjusts the subwoofer signal from completely attenuated to +10 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput select switch\u003c\/strong\u003e — Selects whether the subwoofer takes its signal from the subwoofer input or the summed satellite inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-inch driver\u003c\/strong\u003e — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard Class D amplifier delivers 440 W peak with driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rigging\u003c\/strong\u003e — Top and side nut plates with 3\/8-inch or M10 threads accept the optional MUB-MM10 U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Anchors a discreet, weather-resistant sub-satellite system for sanctuaries and covered exterior areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible small-format AV systems where weather resistance is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low end for speech and music in performance and assembly spaces, including exposed structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment space\u003c\/strong\u003e — Delivers durable low-frequency output and satellite distribution for covered exterior briefing areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33–228 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–208 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38–138 Hz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;11 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 10-inch cone driver, 2-inch voice coil, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass D, 440 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR female subwoofer input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSatellite Connectors\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo XLR female inputs; two 5-pin Phoenix IntelligentDC outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz; auto voltage selection 90–265 V AC; powerCON 20 with loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 19 in x H 11 in x D 12 in (483 x 279 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30.8 lb (13.97 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish, weather protected; hex-stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and side nut plates, 3\/8-inch or M10 threads; optional MUB-MM10 U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the weather protection cover?\u003c\/strong\u003e The WP treatment is a factory option that allows the MM-10ACX to be installed in covered outdoor and semi-exposed locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat satellite connector does this model use?\u003c\/strong\u003e This WP-5 configuration provides its IntelligentDC satellite outputs on 5-pin Phoenix connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat satellite loudspeakers can it power?\u003c\/strong\u003e Its IntelligentDC outputs are designed to power and feed Meyer Sound IntelligentDC satellites such as the MM-4XP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e It has top and side nut plates with 3\/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924591436012,"sku":"09.199.014.11","price":4760.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985"},{"product_id":"meyer-sound-acheron-lf-2-x-15-cinema-screen-subwoofer","title":"Meyer Sound ACHERON-LF 2 x 15\" Cinema Screen Subwoofer - 09.193.001.03","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound ACHERON-LF is a self-powered cinema screen channel subwoofer designed exclusively to extend the low-frequency headroom of ACHERON 80 and ACHERON 100 screen channel loudspeakers in larger theaters. Housing dual 15-inch drivers, it operates from 37 Hz to 370 Hz and delivers a 133 dB linear peak SPL. Its frequency and phase responses are tailored to complement the ACHERON loudspeakers, converting each into a column of three aligned low-frequency drivers. The result is roughly 10 dB of additional low-frequency headroom on the LCR channels, depending on room and loading conditions.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-acheron-lf-2-x-15-cinema-screen-subwoofer-creation-networks-93838.webp?v=1757941536\" alt=\"Meyer Sound ACHERON-LF dual 15-inch cinema screen channel subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe ACHERON-LF uses a multi-way, gradated design in which all drivers are active at the lowest frequencies, with each rolling off one at a time via the integral active crossover. This technique eliminates interference between drivers at shorter wavelengths, maintaining ideal polar, phase, and frequency response through the low and low-mid range. It shares the same high-power 15-inch cone driver and rectangular footprint as the ACHERON, and is powered by a two-channel class AB\/H amplifier producing 4500 W peak. It is intended to pair with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-acheron-100-15-cinema-screen-loudspeaker-100-x-50\"\u003eACHERON-100\u003c\/a\u003e or \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-acheron-80-15-cinema-screen-loudspeaker-80-x-80\"\u003eACHERON-80\u003c\/a\u003e screen channels, and complements the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-x-800c-3-2x18-active-cinema-subwoofer\"\u003eX-800C cinema subwoofer\u003c\/a\u003e used for LFE. Additional Meyer Sound cinema products are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. The ACHERON 80 or ACHERON 100 can be stacked on top of the ACHERON-LF with uptilt or downtilt using optional stacking brackets.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Screen Channel Subwoofer\u003c\/strong\u003e — Designed exclusively to add low-frequency headroom to ACHERON 80 and ACHERON 100 screen channels in larger theaters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 15-inch Drivers\u003c\/strong\u003e — Two high-power 15-inch cone drivers with 4-inch voice coils in a tuned, vented enclosure deliver maximum low-frequency impact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGradated Multi-Way Design\u003c\/strong\u003e — Drivers roll off one at a time through the active crossover to eliminate interference and maintain ideal polar and phase response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched Response\u003c\/strong\u003e — The 37 Hz to 370 Hz operating range and phase response are chosen to complement the ACHERON loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Output\u003c\/strong\u003e — A 133 dB linear peak SPL and 4500 W peak amplifier provide ample headroom for demanding digital soundtracks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShared Footprint\u003c\/strong\u003e — The cabinet shares the same rectangular footprint as the ACHERON, allowing the screen channel to stack on top with uptilt or downtilt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional RMS Monitoring\u003c\/strong\u003e — The optional RMS remote monitoring system reports operating parameters to a host computer running Compass software.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e37 Hz – 370 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38 Hz – 340 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e60 Hz – 230 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e133 dB (M-noise, crest factor \u0026gt;11 dB); 133 dB (pink noise); 133 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTransducers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo high-power 15-inch cone drivers with neodymium magnets; 4 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel class AB\/H, complementary MOSFET output stages; 4500 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; XLR 3-pin female input with male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e250 V NEMA L6-20 twistlock inlet or IEC 309 male inlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 31 in (787 mm) x H 36.18 in (919 mm) x D 20.5 in (521 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e185 lb (83.91 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan the ACHERON-LF be used as a standalone subwoofer?\u003c\/strong\u003e\u003cbr\u003eNo. The ACHERON-LF was designed exclusively for use with ACHERON 80 and ACHERON 100 screen channel loudspeakers to extend their low-frequency headroom, not as a general-purpose or LFE subwoofer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much additional headroom does it provide?\u003c\/strong\u003e\u003cbr\u003ePairing the ACHERON-LF with an ACHERON screen channel adds approximately 10 dB more low-frequency headroom, depending on room acoustics and loading conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan an ACHERON screen channel be stacked on the ACHERON-LF?\u003c\/strong\u003e\u003cbr\u003eYes. The ACHERON 80 or ACHERON 100 can be mounted on top of the ACHERON-LF with uptilt or downtilt using optional stacking brackets, since both share the same rectangular footprint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ACHERON-LF covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942532899052,"sku":"09.193.001.03","price":11270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-acheron-lf-2-x-15-cinema-screen-subwoofer-creation-networks-93838.webp?v=1757941536"},{"product_id":"meyer-sound-amie-sub-3-15-active-subwoofer-3-pin-input","title":"Meyer Sound Amie-Sub-3 15\" Active Subwoofer, 3-Pin Input - 09.251.001.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound Amie-Sub is a compact, self-powered studio and cinema subwoofer designed as the companion to the AMIE precision studio monitor, extending system response down to 22 Hz. This 3-Pin input version uses a looping XLR connector panel for straightforward integration into stereo and multichannel monitoring setups. A single 15-inch long-excursion driver in a bass-reflex cabinet delivers clean, punchy transients and excellent phase coherence with a 124.5 dB linear peak SPL. It is well suited to small- to medium-sized mixing and editing rooms.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-amie-sub-3-15-active-subwoofer-3-pin-input-us-7-1-db25-creation-networks-20161.webp?v=1757941556\" alt=\"Meyer Sound Amie-Sub 15-inch compact active studio and cinema subwoofer with 3-pin input\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe Amie-Sub houses a single 15-inch low-distortion, long-excursion cone driver in an optimized bass-reflex cabinet, powered by a two-channel open-loop Class-D amplifier producing 1100 W peak. Onboard processing includes crossover, driver protection, and frequency and phase correction, while the Intelligent AC power supply provides automatic voltage selection, EMI filtering, soft turn-on, and surge suppression. Its slanted connector panel allows flush mounting against a wall, reducing installation depth to 19 inches including connectors. It pairs naturally with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-amie-3-6-5-2-way-active-speaker-3-pin-input\"\u003eAMIE precision studio monitor\u003c\/a\u003e and also complements HMS surround and UltraSeries loudspeakers. Optional 2.1 (XLR) and 7.1 (DB-25) integration modules add bass management and a dedicated LFE input for complete bass-managed systems. Additional Meyer Sound studio and cinema products are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. Side 3\/8-inch-16 mounting points accept the optional MUB-Amie-Sub U-bracket for ceiling mounting.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Low Frequency\u003c\/strong\u003e — Extends system response down to 22 Hz for full-range studio and cinema monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear, Low-Distortion Output\u003c\/strong\u003e — Linear frequency, phase, and amplitude response with extremely low distortion for clear low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Peak Power\u003c\/strong\u003e — A two-channel open-loop Class-D amplifier produces 1100 W peak with excellent transient reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAMIE Companion\u003c\/strong\u003e — Specifically designed to complete an AMIE system, and also integrates with HMS-5, HMS-10, HMS-12, HMS-15, and UltraSeries loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush-Mount Cabinet\u003c\/strong\u003e — The slanted connector panel allows the cabinet to sit flush against a wall, reducing installation depth to 19 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Integration Modules\u003c\/strong\u003e — Optional 2.1 (XLR) and 7.1 (DB-25) modules add bass management and a dedicated LFE input for systems up to 7.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Ceiling Mounting\u003c\/strong\u003e — Side 3\/8-inch-16 mounting points accept the optional MUB-Amie-Sub U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e22 Hz – 160 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e25 Hz – 145 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33 Hz – 145 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e124.5 dB (M-noise, crest factor \u0026gt;11.5 dB); 124.5 dB (pink noise); 126 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTransducer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch long-excursion cone driver; 3 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop Class-D; 1100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; XLR 3-pin female with male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop output to feed AMIE loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 24.00 in (609 mm) x H 17.5 in (444 mm) x D 19.00 in (482 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e74 lb (33.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with low-gloss, slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 3-Pin input version include?\u003c\/strong\u003e\u003cbr\u003eThis version ships with the standard looping XLR 3-pin input panel. Optional 2.1 (XLR) and 7.1 (DB-25) integration modules are available separately to add bass management and LFE handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow low does the Amie-Sub extend?\u003c\/strong\u003e\u003cbr\u003eIt has an operating frequency range of 22 Hz to 160 Hz, extending an AMIE system down to the lower limit of the audible range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat loudspeakers does the Amie-Sub work with?\u003c\/strong\u003e\u003cbr\u003eIt is the dedicated companion to the AMIE precision monitor and also integrates with HMS-5, HMS-10, HMS-12, and HMS-15 surround loudspeakers and UltraSeries loudspeakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Amie-Sub covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942638412012,"sku":"09.251.001.01","price":6380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-amie-sub-3-15-active-subwoofer-3-pin-input-us-7-1-db25-creation-networks-20161.webp?v=1757941556"},{"product_id":"meyer-sound-amie-sub-3-15-active-subwoofer-3-pin-input-us-2-1-xlr","title":"Meyer Sound Amie-Sub-3 15\" Active Subwoofer, 3-Pin Input, US, 2.1 (XLR) - 09.251.002.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound Amie-Sub is a compact, self-powered studio and cinema subwoofer designed as the companion to the AMIE precision studio monitor, extending system response down to 22 Hz. This US 2.1 version is equipped with the 2.1 (XLR) integration module, which adds bass management and a dedicated phase-matched LFE input over XLR connectors to create a bass-managed stereo or 2.1 system. A single 15-inch long-excursion driver delivers clean, punchy transients and a 124.5 dB linear peak SPL. It is well suited to small- to medium-sized mixing and editing rooms.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-amie-sub-3-15-active-subwoofer-3-pin-input-us-7-1-db25-creation-networks-20161.webp?v=1757941556\" alt=\"Meyer Sound Amie-Sub 15-inch compact active subwoofer with 2.1 XLR integration module\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe Amie-Sub houses a single 15-inch low-distortion, long-excursion cone driver in an optimized bass-reflex cabinet, powered by a two-channel open-loop Class-D amplifier producing 1100 W peak. The installed 2.1 integration module provides two XLR input channels plus a dedicated phase-matched LFE input with selectable +10 dB boost, along with XLR loop outputs for channels 1 and 2, enabling a complete bass-managed stereo system. Its slanted connector panel allows flush mounting against a wall, reducing installation depth to 19 inches including connectors. It pairs naturally with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-amie-3-6-5-2-way-active-speaker-3-pin-input\"\u003eAMIE precision studio monitor\u003c\/a\u003e and also complements HMS surround and UltraSeries loudspeakers. Additional Meyer Sound studio and cinema products are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. Side 3\/8-inch-16 mounting points accept the optional MUB-Amie-Sub U-bracket for ceiling mounting.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.1 (XLR) Integration Module\u003c\/strong\u003e — Includes two XLR input channels and a dedicated phase-matched LFE input for a bass-managed stereo or 2.1 system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable LFE Boost\u003c\/strong\u003e — The LFE input offers a selectable +10 dB boost to meet a variety of standards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Low Frequency\u003c\/strong\u003e — Extends system response down to 22 Hz for full-range studio and cinema monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear, Low-Distortion Output\u003c\/strong\u003e — Linear frequency, phase, and amplitude response with extremely low distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Peak Power\u003c\/strong\u003e — A two-channel open-loop Class-D amplifier produces 1100 W peak with excellent transient reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush-Mount Cabinet\u003c\/strong\u003e — The slanted connector panel allows the cabinet to sit flush against a wall, reducing installation depth to 19 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Ceiling Mounting\u003c\/strong\u003e — Side 3\/8-inch-16 mounting points accept the optional MUB-Amie-Sub U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e22 Hz – 160 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e25 Hz – 145 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33 Hz – 145 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e124.5 dB (M-noise, crest factor \u0026gt;11.5 dB); 124.5 dB (pink noise); 126 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTransducer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch long-excursion cone driver; 3 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop Class-D; 1100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003e2.1 Module Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female inputs (channels 1, 2, and LFE); XLR 3-pin male loop outputs (channels 1 and 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop output to feed AMIE loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 24.00 in (609 mm) x H 17.5 in (444 mm) x D 19.00 in (482 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e74 lb (33.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with low-gloss, slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 2.1 (XLR) version add over the standard 3-Pin model?\u003c\/strong\u003e\u003cbr\u003eThis version includes the 2.1 integration module, which provides two XLR input channels and a dedicated phase-matched LFE input with selectable +10 dB boost to create a bass-managed stereo or 2.1 system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow low does the Amie-Sub extend?\u003c\/strong\u003e\u003cbr\u003eIt has an operating frequency range of 22 Hz to 160 Hz, extending an AMIE system down to the lower limit of the audible range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat loudspeakers does the Amie-Sub work with?\u003c\/strong\u003e\u003cbr\u003eIt is the dedicated companion to the AMIE precision monitor and also integrates with HMS-5, HMS-10, HMS-12, and HMS-15 surround loudspeakers and UltraSeries loudspeakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Amie-Sub covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942650470636,"sku":"09.251.002.01","price":7070.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-amie-sub-3-15-active-subwoofer-3-pin-input-us-7-1-db25-creation-networks-20161.webp?v=1757941556"},{"product_id":"meyer-sound-amie-sub-3-15-active-subwoofer-3-pin-input-us-7-1-db25","title":"Meyer Sound Amie-Sub-3 15\" Active Subwoofer, 3-Pin Input, US, 7.1 (DB25) - 09.251.007.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound Amie-Sub is a compact, self-powered studio and cinema subwoofer designed as the companion to the AMIE precision studio monitor, extending system response down to 22 Hz. This US 7.1 version is equipped with the 7.1 (DB-25) integration module, which adds bass management and a dedicated LFE input over industry-standard multi-pin DB-25 connectors for 5.1 and 7.1 configurations. A single 15-inch long-excursion driver delivers clean, punchy transients and a 124.5 dB linear peak SPL. It is well suited to immersive mixing and editing rooms.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-amie-sub-3-15-active-subwoofer-3-pin-input-us-7-1-db25-creation-networks-20161.webp?v=1757941556\" alt=\"Meyer Sound Amie-Sub 15-inch compact active subwoofer with 7.1 DB-25 integration module\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe Amie-Sub houses a single 15-inch low-distortion, long-excursion cone driver in an optimized bass-reflex cabinet, powered by a two-channel open-loop Class-D amplifier producing 1100 W peak. The installed 7.1 integration module provides DB-25 female input and output connectors for channels 1 through 7 plus LFE, using the industry-standard analog pinout. It supports 5.1 and 7.1 configurations with third-party high-quality 8-channel DB-25-to-XLR cables (not included) and provides bass management and LFE handling for up to seven AMIE precision monitors. It pairs naturally with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-amie-3-6-5-2-way-active-speaker-3-pin-input\"\u003eAMIE precision studio monitor\u003c\/a\u003e and also complements HMS surround and UltraSeries loudspeakers. Additional Meyer Sound studio and cinema products are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. Side 3\/8-inch-16 mounting points accept the optional MUB-Amie-Sub U-bracket for ceiling mounting.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.1 (DB-25) Integration Module\u003c\/strong\u003e — Provides DB-25 inputs and outputs for channels 1 to 7 plus LFE to create bass-managed systems up to 7.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImmersive Bass Management\u003c\/strong\u003e — Supports 5.1 and 7.1 configurations with up to seven AMIE precision monitors using the standard analog DB-25 pinout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Low Frequency\u003c\/strong\u003e — Extends system response down to 22 Hz for full-range studio and cinema monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear, Low-Distortion Output\u003c\/strong\u003e — Linear frequency, phase, and amplitude response with extremely low distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Peak Power\u003c\/strong\u003e — A two-channel open-loop Class-D amplifier produces 1100 W peak with excellent transient reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush-Mount Cabinet\u003c\/strong\u003e — The slanted connector panel allows the cabinet to sit flush against a wall, reducing installation depth to 19 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Ceiling Mounting\u003c\/strong\u003e — Side 3\/8-inch-16 mounting points accept the optional MUB-Amie-Sub U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e22 Hz – 160 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e25 Hz – 145 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33 Hz – 145 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e124.5 dB (M-noise, crest factor \u0026gt;11.5 dB); 124.5 dB (pink noise); 126 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTransducer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch long-excursion cone driver; 3 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel, open-loop Class-D; 1100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003e7.1 Module Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDB-25 female inputs (channels 1–7 and LFE); DB-25 female outputs (channels 1–7 and LFE + bass management)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop output to feed AMIE loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 24.00 in (609 mm) x H 17.5 in (444 mm) x D 19.00 in (482 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e74 lb (33.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with low-gloss, slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 7.1 (DB-25) version add?\u003c\/strong\u003e\u003cbr\u003eThis version includes the 7.1 integration module with DB-25 connectors for channels 1 through 7 plus LFE, enabling bass-managed 5.1 and 7.1 immersive systems with up to seven AMIE monitors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre DB-25 cables included?\u003c\/strong\u003e\u003cbr\u003eNo. Third-party high-quality 8-channel DB-25-to-XLR cables are required and are not included with the subwoofer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat loudspeakers does the Amie-Sub work with?\u003c\/strong\u003e\u003cbr\u003eIt is the dedicated companion to the AMIE precision monitor and also integrates with HMS-5, HMS-10, HMS-12, and HMS-15 surround loudspeakers and UltraSeries loudspeakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Amie-Sub covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942667247852,"sku":"09.251.007.01","price":7250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-amie-sub-3-15-active-subwoofer-3-pin-input-us-7-1-db25-creation-networks-20161.webp?v=1757941556"},{"product_id":"meyer-sound-x-1100c-high-power-cinema-subwoofer","title":"Meyer Sound X-1100C High‐Power Cinema Subwoofer - 09.313.001.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound X-1100C is a self-powered high-power cinema subwoofer designed to add low-frequency output in medium- to large-scale motion picture theaters and space-limited venues. Built around two 18-inch long-excursion drivers and an 8,100 W peak amplifier, this commercial cinema subwoofer reproduces low-frequency transients at high continuous output with very low distortion across a 28 Hz to 180 Hz range. As a self-powered cinema subwoofer with onboard RMS monitoring, the X-1100C integrates with Meyer Sound screen channel and surround loudspeakers without external amplifier racks, simplifying installation in cinema and post-production environments.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-x-1100c-highpower-cinema-subwoofer-creation-networks-86083.webp?v=1757941571\" alt=\"Meyer Sound X-1100C high-power self-powered cinema subwoofer with dual 18-inch drivers\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eAn optimally tuned, vented multi-ply birch cabinet houses the X-1100C's two 18-inch long-excursion cone drivers, while TruPower limiting protects the drivers and minimizes power compression under sustained high-output conditions. The 28 Hz to 180 Hz operating range complements Meyer Sound cinema loudspeakers such as the Acheron screen channels and HMS surrounds, and for full SMPTE-compliant subsonic extension the X-1100C pairs with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms\"\u003eVLFC Very Low Frequency Control Element\u003c\/a\u003e. The field-replaceable amplifier and control module, standard RMS remote monitoring, and stackable cabinet design make this high-power cinema subwoofer a practical choice for theaters with limited real estate. It is well suited to systems built around the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-astrya-140-screen-channel-loudspeaker\"\u003eASTRYA-140 cinema screen channel\u003c\/a\u003e, and additional cinema loudspeakers are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-powered, 8,100 W peak amplifier\u003c\/strong\u003e — Two-channel Class AB\/H MOSFET amplification removes the need for external cinema amplifier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 18-inch long-excursion drivers\u003c\/strong\u003e — Deliver 140 dB linear peak SPL with low-frequency clarity and excellent transient response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTruPower limiting\u003c\/strong\u003e — Protects drivers and minimizes power compression under high continuous and peak output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28–180 Hz operating range\u003c\/strong\u003e — Integrates with Meyer Sound Acheron, HMS, and ASTRYA cinema loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS remote monitoring standard\u003c\/strong\u003e — Reports amplifier and driver parameters to Compass software via the RMServer interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable, space-efficient cabinet\u003c\/strong\u003e — Protective skids and an optional caster frame support three-cabinet stacking for venues with limited footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-replaceable amplifier module\u003c\/strong\u003e — A single rear module contains the amplifier, control electronics, and power supply for serviceability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Adds high-output low frequency to medium- and large-scale cinema and presentation auditoriums.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Suits premium screening rooms and event theaters needing cinema-grade bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast studio\u003c\/strong\u003e — Provides reference low-frequency reproduction for post-production and dubbing stages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28 Hz – 180 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30 Hz – 160 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e45 Hz – 160 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e140 dB (M-noise, crest factor \u0026gt;9.5 dB); 140 dB (pink noise); 141 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360° (single unit); varies with configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTransducers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 18\" long-excursion cone drivers; 8 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e2-channel Class AB\/H bridged MOSFET; 8,100 W peak; THD\/IM\/TIM \u0026lt;0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; XLR 3-pin female input with male loop output; 10 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePowerCon 32; 208–235 V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRMS remote monitoring module (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions (W×H×D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e51.04 × 20.48 × 33.00 in (1296 × 520 × 838 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight (without rigging)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e249 lb (112.9 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eCriterion\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eMeyer Sound X-1100C\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eJBL 4645C\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eJBL 4642A\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSelf-powered with onboard 8,100 W peak amplifier and DSP.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external cinema power amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external cinema power amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDriver configuration\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 18\" long-excursion drivers in a tuned, vented cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSingle 18\" driver in a bass-reflex enclosure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDual 18\" drivers in a bass-reflex enclosure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOutput and headroom\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e140 dB linear peak SPL with low compression at sustained levels.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLower maximum output; depends on the matched external amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHigher output than the 4645C but still amplifier-dependent.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRMS telemetry standard via Compass and RMServer.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo integrated monitoring; handled at the amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo integrated monitoring; handled at the amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIntegration\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDesigned to combine with Meyer Sound cinema systems and the VLFC for subsonic extension.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHX-approved sub for general cinema low-frequency augmentation.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHX-approved high-output sub for larger auditoriums.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the X-1100C need an external amplifier?\u003c\/strong\u003e\u003cbr\u003eNo. It is self-powered, with a two-channel Class AB\/H amplifier, control electronics, and RMS monitoring in a field-replaceable rear module. It requires AC power (208–235 V AC via PowerCon 32) and a balanced audio feed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does it connect to for audio?\u003c\/strong\u003e\u003cbr\u003eThe X-1100C uses a balanced XLR 3-pin female input with a male loop output, accepting a nominal 0 dBV signal. It is typically driven and aligned through a Galileo GALAXY processor in a Meyer Sound cinema system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I extend output below 28 Hz?\u003c\/strong\u003e\u003cbr\u003ePair the X-1100C with the Meyer Sound VLFC, which covers 13–30 Hz, to achieve full SMPTE-compliant subsonic reproduction in premium cinema rooms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple units be deployed in tight spaces?\u003c\/strong\u003e\u003cbr\u003eYes. The cabinet is stackable, and an optional MCF-1100 caster frame supports moving up to three X-1100C cabinets, making it practical for venues with limited floor area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e\u003cbr\u003eThe X-1100C is covered under Meyer Sound's standard product warranty. \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003eContact Creation Networks\u003c\/a\u003e for warranty terms and commercial cinema system design support.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942927687916,"sku":"09.313.001.02","price":24710.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-x-1100c-highpower-cinema-subwoofer-creation-networks-86083.webp?v=1757941571"},{"product_id":"meyer-sound-x-800c-3-2x18-active-cinema-subwoofer","title":"Meyer Sound X-800C 2x18\" Active Cinema Subwoofer - 09.087.001.11","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound X-800C is a high-power, self-powered cinema subwoofer that delivers very low frequencies with ample headroom for the low-frequency effects (LFE) channel and screen channel low-end support. Built around two 18-inch drivers, it reproduces clean, punchy transients down to 20 Hz with a 133 dB linear peak SPL. Excellent phase coherence allows smooth transitions from the screen channels to the LFE channel. It is intended for motion picture theaters, residential cinema, and production and postproduction facilities requiring extended bandwidth and very low distortion.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-x-800c-2x18-active-cinema-subwoofer-creation-networks-80595.jpg?v=1757941572\" alt=\"Meyer Sound X-800C dual 18-inch active high-power cinema subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe X-800C houses two Meyer Sound long-excursion, high-efficiency 18-inch drivers in an optimally tuned, vented cabinet. Its output rolls off well below 250 Hz to avoid comb-filtering effects when multiple X-800C subwoofers are arrayed. An integral two-channel class AB\/H amplifier with complementary MOSFET output stages supplies 1240 W, with TruPower limiting on each channel to maximize reliability and minimize power compression. The Intelligent AC power supply provides automatic voltage selection, EMI filtering, soft turn-on, and surge suppression, while onboard processing applies phase and frequency correction. It pairs with ACHERON screen channels such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-acheron-100-15-cinema-screen-loudspeaker-100-x-50\"\u003eACHERON-100\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-acheron-80-15-cinema-screen-loudspeaker-80-x-80\"\u003eACHERON-80\u003c\/a\u003e, and complements the more compact \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-sound-x-400c-18-compact-active-cinema-subwoofer\"\u003eX-400C cinema subwoofer\u003c\/a\u003e. Additional Meyer Sound cinema products are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. The optional RMS remote monitoring system reports loudspeaker parameters to a computer running Compass control software.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 18-inch Drivers\u003c\/strong\u003e — Two long-excursion, high-efficiency 18-inch cone drivers in a tuned, vented cabinet deliver high-output low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Low Frequency\u003c\/strong\u003e — Reproduces clean, punchy transients down to 20 Hz even at very high levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Output\u003c\/strong\u003e — A 133 dB linear peak SPL (M-noise) provides ample headroom for the most demanding digital soundtracks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArray-Friendly Roll-Off\u003c\/strong\u003e — Output rolls off well below 250 Hz to avoid comb-filtering effects when multiple units are arrayed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTruPower Limiting\u003c\/strong\u003e — Each amplifier channel features TruPower limiting to maximize reliability, minimize power compression, and extend component life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass AB\/H Amplification\u003c\/strong\u003e — An integral two-channel class AB\/H amplifier supplies 1240 W with distortion below 0.02 percent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional RMS Monitoring\u003c\/strong\u003e — The optional RMS remote monitoring system reports operating parameters to a computer running Compass software.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e20 Hz – 200 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e23 Hz – 160 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e32 Hz – 175 Hz ±30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e133 dB (M-noise, crest factor \u0026gt;12 dB); 133 dB (pink noise); 137 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTransducers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 18-inch cone drivers; 8 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel class AB\/H, complementary MOSFET output stages; 1240 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eForced air, two fans (one ultrahigh-speed reserve fan)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; XLR 3-pin female input with male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e250 V NEMA L6-20 inlet or IEC 309 male inlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 31.00 in (787 mm) x H 40.00 in (1016 mm) x D 20.5 in (521 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e221 lb (100.24 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with smooth medium-gloss black finish; optional textured finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound X-800C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eJBL 4645C\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X-800C is self-powered with an integral two-channel class AB\/H amplifier and TruPower limiting.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe JBL 4645C is a passive cinema subwoofer that requires an external amplifier and processor.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDriver Configuration\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses two 18-inch long-excursion drivers in a tuned, vented cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 4645C uses a single 18-inch driver, so two cabinets are typically needed to match the cone area.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOnboard Processing\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X-800C includes built-in phase and frequency correction for consistent results across rooms.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 4645C relies on external DSP and amplifier settings configured by the installer.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eArray Behavior\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOutput rolls off well below 250 Hz to reduce comb filtering when multiple units are arrayed.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive array behavior depends on the external processing and crossover applied.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAn optional RMS remote monitoring system reports operating parameters to a host computer.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 4645C has no integrated remote monitoring of amplifier parameters.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eInstallation\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe self-powered design simplifies installation by removing external amplifier and cabling variables.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eA passive design requires sizing and wiring an external amplifier and rack space.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs the X-800C self-powered?\u003c\/strong\u003e\u003cbr\u003eYes. It includes an integral two-channel class AB\/H amplifier with TruPower limiting and an Intelligent AC power supply, so no external amplifier is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow low does the X-800C extend?\u003c\/strong\u003e\u003cbr\u003eIt delivers extended low-frequency output down to 20 Hz with clean, punchy transients even at very high levels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan multiple X-800C subwoofers be arrayed?\u003c\/strong\u003e\u003cbr\u003eYes. Its output rolls off well below 250 Hz to avoid adverse comb-filtering effects generated by the proximity of other X-800C subwoofers in arrays.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the X-800C compare to the X-400C?\u003c\/strong\u003e\u003cbr\u003eThe X-800C uses two 18-inch drivers for higher output in larger rooms, while the X-400C uses a single 18-inch driver in a more compact cabinet for smaller installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the X-800C covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942951575788,"sku":"09.087.001.11","price":9870.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-x-800c-2x18-active-cinema-subwoofer-creation-networks-80595.jpg?v=1757941572"}],"url":"https:\/\/creationnetworks.net\/collections\/meyer-sound-subwoofers.oembed","provider":"Creation Networks","version":"1.0","type":"link"}