{"title":"Meyer Sound Line Array Loudspeakers","description":"\u003cp\u003eMeyer Sound self-powered line array systems for touring, performing arts, houses of worship and large installed venues. The range runs from LINA for smaller rooms and fill duty, through LEOPARD for mid-size and main hangs, to PANTHER for large-scale touring and arena work — every cabinet carrying its own amplification and processing so array performance stays consistent as the system scales.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing between LINA, LEOPARD and PANTHER\u003c\/h2\u003e\n\u003cp\u003eArray selection follows throw distance and required SPL at the back of the seating, not cabinet count. LINA is the compact element for small venues, under-balcony fill and side hangs on a larger system. LEOPARD is the working mid-size array for most theatres, sanctuaries and regional touring. PANTHER covers arena-scale throw where output and pattern control both have to hold at distance. All three share Meyer Sound's rigging approach, and elements from different series are routinely combined in one design — LEOPARD mains with LINA fills is a common configuration.\u003c\/p\u003e\n\n\u003ch2\u003eRigging and transport\u003c\/h2\u003e\n\u003cp\u003eThe hardware matters as much as the cabinets. Grid kits, caster frames, pull-back frames, ground-stack down-tilt kits, yokes, U-brackets, AC looping cables and pullover covers are all stocked alongside the loudspeakers. Array geometry is calculated before anything is ordered: the grid and frame determine what angles are achievable, and the ground-stack kit determines whether the array can be deployed without flying at all. Pulling the rigging list off the design rather than ordering it after the cabinets is what keeps a load-in on schedule.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifying a system\u003c\/h2\u003e\n\u003cp\u003eCreation Networks models coverage and rigging against the actual room before specifying — array angle, splay, subwoofer placement and structural capacity planned to the venue rather than assembled from a package. We handle design, rigging plans, installation, commissioning and ongoing support. Call 888-230-3661 or email sales@creationnetworks.net.\u003c\/p\u003e","products":[{"product_id":"meyer-sound-panther-l-2-200-watt-12-inch-active-line-array-speaker","title":"Meyer Sound PANTHER-L 2,200-watt 12-inch Active Line Array Speaker - 09.324.001.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound PANTHER-L is a self-powered large-format line array loudspeaker configured with an 80-degree long-throw horn for the tightest horizontal pattern in the PANTHER family. Built for long-throw coverage in large auditoriums, arenas, houses of worship, and touring applications, this Milan AVB line array integrates amplification, processing, and network audio in each cabinet to simplify deployment and reduce amplifier-rack infrastructure. With a 55 Hz to 16 kHz range and 150.5 dB maximum sound level, the PANTHER-L delivers high-output, long-throw line array performance with consistent directional control from front to back.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-panther-w-2200-watt-12-inch-active-line-array-speaker-creation-networks-19916.jpg?v=1757941259\" alt=\"Meyer Sound PANTHER-L self-powered large-format long-throw line array loudspeaker\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach PANTHER-L cabinet houses two 12-inch long-excursion low-frequency drivers and two 3-inch diaphragm compression drivers on a computationally optimized high-frequency horn, producing a directional 80-degree pattern that remains consistent at all output levels. Arrays of four or more cabinets functionally create a cardioid polar pattern without user settings, improving low-mid control in demanding rooms. As a self-powered Milan AVB line array, the PANTHER-L accepts both analog (XLR TOP) and digital (etherCON TOP, Milan-certified AVB) inputs, with loudspeaker telemetry available over the network for commercial monitoring. Its long-throw horn lets system designers cover deep venues with fewer or shorter arrays. The PANTHER-L pairs with PANTHER low-frequency elements and Meyer Sound subwoofers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms\"\u003eVLFC\u003c\/a\u003e for extended low end, and complements wider-coverage members of the range like the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-panther-m-2-200-watt-12-inch-active-line-array-speaker\"\u003ePANTHER-M\u003c\/a\u003e. For smaller-format arrays, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e80° long-throw horn\u003c\/strong\u003e — The tightest horizontal pattern in the PANTHER family for deep-venue, long-throw coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-powered design\u003c\/strong\u003e — Onboard amplification and DSP reduce amplifier racks, cabling, and system complexity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilan AVB and analog inputs\u003c\/strong\u003e — Standard etherCON TOP Milan-certified digital input plus XLR TOP analog input for flexible integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150.5 dB maximum sound level\u003c\/strong\u003e — High-output performance from a compact large-format cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-forming cardioid arrays\u003c\/strong\u003e — Four-cabinet and longer arrays create a consistent cardioid pattern with no user settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP55 weather rating\u003c\/strong\u003e — Rated IP55 when connected with Neutrik TOP cabling for outdoor and demanding installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly rigging\u003c\/strong\u003e — Captive GuideALink end frames with quick-release pins allow 0.5°–9° splay angles for fast, repeatable arrays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Long-throw coverage for deep performing-arts and presentation auditoriums.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — High-intelligibility reinforcement for large worship venues and broadcast services.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Scalable arrays for arenas, ballrooms, and flexible large-format venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-hands room\u003c\/strong\u003e — Even, high-output coverage for large corporate all-hands and general-session spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz – 16 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum Sound Level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e150.5 dB (peak, burst noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAES75 Max Linear Sound Levels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e127.5 dBZ, 144.5 dBZpk, 125.5 dBA (RMS input +8.3 dBV, 50°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80° (long-throw horn)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTransducers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLF: two 12\" long-excursion drivers (4 Ω); HF: two 3\" diaphragm compression drivers on a horn (8 Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAnalog Audio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik XLR 3-pin TOP female input with male loop output; source up to +24 dBU into 50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDigital Audio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik etherCON TOP; AVB, Milan certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik powerCON TRUE1 TOP; 200–240 V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e1100 W max long-term continuous; 2200 W burst; 150 W idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eIngress Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIP55 with Neutrik TOP connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaptive GuideALink end frames; 0.5°–9° splay; detachable side handles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e150 lb (68 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, slightly textured black finish; powder-coated stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eCriterion\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eMeyer Sound PANTHER-L\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eL-Acoustics K2\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003ed\u0026amp;b KSL8\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eJBL VTX A12\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSelf-powered; onboard amplifier and DSP in every cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; driven by external LA12X amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; driven by external d\u0026amp;b D80\/D40 amplifiers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; driven by external touring amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNetwork audio\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMilan-certified AVB plus analog input standard on the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNetworking handled at the amplified controller layer.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNetworking handled at the amplifier layer.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNetworking handled at the amplifier\/processor layer.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHorizontal coverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFixed 80° long-throw; M (95°) and W (110°) cabinets cover other patterns.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eVariable horizontal directivity within a single cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFixed broadband directivity with cardioid low-mid control.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFixed coverage pattern per cabinet.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather rating\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIP55 rated with TOP connectors.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather resistance varies by configuration.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather resistance varies by configuration.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather resistance varies by configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSystem footprint\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHeavier per cabinet (150 lb) because amplification is integrated, but no amp racks required.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLighter cabinet, but requires separate amplifier racks and cabling.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLighter cabinet, but requires separate amplifier racks.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLighter cabinet, but requires separate amplifier racks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the PANTHER-L self-powered?\u003c\/strong\u003e\u003cbr\u003eYes. Each cabinet contains its own amplification and DSP, so no external amplifier racks are required — only AC power (200–240 V AC via powerCON TRUE1 TOP) and an audio feed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PANTHER-L, M, and W?\u003c\/strong\u003e\u003cbr\u003eAll three share identical electronics, drivers, and a 55 Hz–16 kHz range; they differ in horizontal coverage. PANTHER-L is 80° (long-throw), PANTHER-M is 95°, and PANTHER-W is 110°. Choose L for the deepest, narrowest coverage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it integrate into a networked AV system?\u003c\/strong\u003e\u003cbr\u003eThe PANTHER-L offers a Milan-certified AVB digital input alongside a balanced analog input, and is typically managed with a Galileo GALAXY processor and designed in MAPP 3D. Loudspeaker telemetry is available over the network.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The cabinet is rated IP55 when connected with Neutrik TOP (True Outdoor Protection) cabling, making it suitable for festivals and permanent outdoor installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e\u003cbr\u003eThe PANTHER-L is covered under Meyer Sound's standard product warranty. \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003eContact Creation Networks\u003c\/a\u003e for warranty terms, array design, and commercial AV integration support.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918317117676,"sku":"09.324.001.01","price":22550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-panther-w-2200-watt-12-inch-active-line-array-speaker-creation-networks-19916.jpg?v=1757941259"},{"product_id":"meyer-sound-panther-m-2-200-watt-12-inch-active-line-array-speaker","title":"Meyer Sound PANTHER-M 2,200-watt 12-inch Active Line Array Speaker - 09.325.001.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound PANTHER-M is a self-powered large-format line array loudspeaker with a 95-degree horizontal pattern, the medium-coverage member of the PANTHER family. Designed for medium- to long-throw coverage in auditoriums, houses of worship, arenas, and touring systems, this Milan AVB line array integrates amplification, processing, and network audio in each cabinet to reduce amplifier-rack infrastructure. With a 55 Hz to 16 kHz range and 150.5 dB maximum sound level, the PANTHER-M delivers high-output line array performance with consistent directional control across a wide listening area.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-panther-w-2200-watt-12-inch-active-line-array-speaker-creation-networks-19916.jpg?v=1757941259\" alt=\"Meyer Sound PANTHER-M self-powered large-format line array loudspeaker, 95-degree coverage\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach PANTHER-M cabinet houses two 12-inch long-excursion low-frequency drivers and two 3-inch diaphragm compression drivers on a computationally optimized high-frequency horn, producing a directional 95-degree pattern that holds at all output levels. Arrays of four or more cabinets functionally create a cardioid polar pattern with no user settings, improving low-mid control in reflective rooms. As a self-powered Milan AVB line array, the PANTHER-M accepts both analog (XLR TOP) and digital (etherCON TOP, Milan-certified AVB) inputs, with loudspeaker telemetry available over the network for commercial monitoring. Its 95-degree pattern makes it the versatile general-purpose choice between the narrower \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-panther-l-2-200-watt-12-inch-active-line-array-speaker\"\u003ePANTHER-L (80°)\u003c\/a\u003e and wider PANTHER-W (110°). It pairs with Meyer Sound subwoofers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms\"\u003eVLFC\u003c\/a\u003e for extended low end. For smaller-format arrays, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e95° horizontal coverage\u003c\/strong\u003e — Medium, versatile pattern that balances throw distance and audience width.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-powered design\u003c\/strong\u003e — Onboard amplification and DSP reduce amplifier racks, cabling, and system complexity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilan AVB and analog inputs\u003c\/strong\u003e — Standard etherCON TOP Milan-certified digital input plus XLR TOP analog input for flexible integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150.5 dB maximum sound level\u003c\/strong\u003e — High-output performance from a compact large-format cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-forming cardioid arrays\u003c\/strong\u003e — Four-cabinet and longer arrays create a consistent cardioid pattern with no user settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP55 weather rating\u003c\/strong\u003e — Rated IP55 when connected with Neutrik TOP cabling for outdoor and demanding installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly rigging\u003c\/strong\u003e — Captive GuideALink end frames with quick-release pins allow 0.5°–9° splay angles for fast, repeatable arrays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Wide, even coverage for performing-arts and presentation auditoriums.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — High-intelligibility reinforcement for large worship venues and broadcast services.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Scalable arrays for arenas, ballrooms, and flexible large-format venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-hands room\u003c\/strong\u003e — Even, high-output coverage for large corporate all-hands and general-session spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz – 16 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum Sound Level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e150.5 dB (peak, burst noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAES75 Max Linear Sound Levels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e126.5 dBZ, 144 dBZpk, 125 dBA (RMS input +6.8 dBV, 50°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e95°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTransducers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLF: two 12\" long-excursion drivers (4 Ω); HF: two 3\" diaphragm compression drivers on a horn (8 Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAnalog Audio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik XLR 3-pin TOP female input with male loop output; source up to +24 dBU into 50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDigital Audio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik etherCON TOP; AVB, Milan certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik powerCON TRUE1 TOP; 200–240 V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e1100 W max long-term continuous; 2200 W burst; 150 W idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eIngress Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIP55 with Neutrik TOP connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaptive GuideALink end frames; 0.5°–9° splay; detachable side handles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e150 lb (68 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, slightly textured black finish; powder-coated stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eCriterion\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eMeyer Sound PANTHER-M\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eL-Acoustics K2\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003ed\u0026amp;b KSL8\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eJBL VTX A12\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSelf-powered; onboard amplifier and DSP in every cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; driven by external LA12X amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; driven by external d\u0026amp;b D80\/D40 amplifiers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; driven by external touring amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNetwork audio\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMilan-certified AVB plus analog input standard on the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNetworking handled at the amplified controller layer.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNetworking handled at the amplifier layer.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNetworking handled at the amplifier\/processor layer.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHorizontal coverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFixed 95°; L (80°) and W (110°) cabinets cover other patterns.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eVariable horizontal directivity within a single cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFixed broadband directivity with cardioid low-mid control.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFixed coverage pattern per cabinet.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather rating\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIP55 rated with TOP connectors.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather resistance varies by configuration.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather resistance varies by configuration.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeather resistance varies by configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSystem footprint\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHeavier per cabinet (150 lb) because amplification is integrated, but no amp racks required.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLighter cabinet, but requires separate amplifier racks and cabling.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLighter cabinet, but requires separate amplifier racks.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLighter cabinet, but requires separate amplifier racks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the PANTHER-M self-powered?\u003c\/strong\u003e\u003cbr\u003eYes. Each cabinet contains its own amplification and DSP, so no external amplifier racks are required — only AC power (200–240 V AC via powerCON TRUE1 TOP) and an audio feed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I choose PANTHER-M over PANTHER-L or PANTHER-W?\u003c\/strong\u003e\u003cbr\u003eAll three share identical electronics, drivers, and a 55 Hz–16 kHz range and differ only in horizontal coverage. PANTHER-M (95°) is the general-purpose choice; choose PANTHER-L (80°) for longer throw or PANTHER-W (110°) for wider audiences.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it integrate into a networked AV system?\u003c\/strong\u003e\u003cbr\u003eThe PANTHER-M offers a Milan-certified AVB digital input alongside a balanced analog input, is managed with a Galileo GALAXY processor, and is designed in MAPP 3D. Loudspeaker telemetry is available over the network.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The cabinet is rated IP55 when connected with Neutrik TOP (True Outdoor Protection) cabling, making it suitable for festivals and permanent outdoor installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e\u003cbr\u003eThe PANTHER-M is covered under Meyer Sound's standard product warranty. \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003eContact Creation Networks\u003c\/a\u003e for warranty terms, array design, and commercial AV integration support.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918354800876,"sku":"09.325.001.01","price":22550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-panther-w-2200-watt-12-inch-active-line-array-speaker-creation-networks-19916.jpg?v=1757941259"},{"product_id":"meyer-sound-panther-w-2-200-watt-12-inch-active-line-array-speaker","title":"Meyer Sound PANTHER-W 2,200-watt 12-inch Active Line Array Speaker - 09.326.001.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound PANTHER-W is a self-powered large-format line array loudspeaker engineered for high-output sound reinforcement across large venues that demand wide horizontal coverage. With a 110-degree horizontal pattern, this active line array speaker is suited to wide auditoriums, houses of worship, and multi-purpose rooms where a single hang must cover a broad audience plane. As part of Meyer Sound's flagship PANTHER family, it pairs dual 12-inch low-frequency drivers and dual 3-inch compression drivers with onboard amplification and Milan AVB networking. The result is a touring line array system that delivers consistent tonal balance and pattern control at full output.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-panther-w-2200-watt-12-inch-active-line-array-speaker-creation-networks-19916.jpg?v=1757941259\" alt=\"Meyer Sound PANTHER-W 110-degree active line array loudspeaker\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003ePANTHER-W is the wide-coverage variant of the PANTHER platform, sharing the same electrical and physical architecture as the PANTHER-L and PANTHER-M while extending horizontal dispersion to 110 degrees. Each cabinet integrates its own amplification and signal processing, eliminating outboard amplifier racks and simplifying system deployment. Captive GuideALink rigging with quick-release pins allows inter-cabinet splay angles from 0.5 to 9 degrees, and arrays of four or more units form a consistent cardioid low-frequency pattern without user settings. Both analog XLR and Milan-certified AVB digital inputs are provided as standard, with an IP55 ingress rating when terminated with Neutrik TOP connectors for demanding indoor and outdoor work. For larger-format 80-degree coverage, integrators often pair or compare PANTHER-W with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-panther-l-2-200-watt-12-inch-active-line-array-speaker\"\u003ePANTHER-L\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-panther-m-2-200-watt-12-inch-active-line-array-speaker\"\u003ePANTHER-M\u003c\/a\u003e, and extend low end with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-vlfc-2x18-active-arrayable-subwoofer-with-collapsible-rain-hood-rms\"\u003eVLFC\u003c\/a\u003e subwoofer. Additional Meyer Sound line array products are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide 110-degree Horizontal Coverage\u003c\/strong\u003e — The PANTHER-W pattern covers broad audience areas from fewer hang positions, reducing the number of arrays needed in wide rooms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard amplification and processing in every cabinet remove the need for external amplifier racks and shorten system setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-inch Low-Frequency Section\u003c\/strong\u003e — Two 12-inch long-excursion cone drivers at 4 ohms nominal deliver high-output low-mid energy with controlled directivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilan-Certified AVB Networking\u003c\/strong\u003e — The etherCON TOP digital input carries Milan-certified AVB audio for deterministic, low-latency distribution across the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Analog and Digital Inputs\u003c\/strong\u003e — Standard XLR analog and AVB digital inputs provide flexible signal routing and redundancy options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP55 Weather Resistance\u003c\/strong\u003e — With Neutrik TOP-terminated cables the enclosure carries an IP55 ingress rating for outdoor and harsh-environment use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuideALink QuickFly Rigging\u003c\/strong\u003e — Captive rigging with quick-release pins sets splay angles from 0.5 to 9 degrees for fast, repeatable array assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard Telemetry\u003c\/strong\u003e — Loudspeaker telemetry is transmitted over the Ethernet port and displayed in software for live system monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Wide 110-degree coverage suits large auditoriums where a single hang must reach a broad seating plane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — High intelligibility and consistent pattern control serve spoken word and music in large worship spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Self-powered scalability adapts to changing event configurations in large multi-purpose venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Hands Room\u003c\/strong\u003e — Even coverage and full-bandwidth output support large corporate all-hands gatherings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz – 16 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum Sound Level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e149.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAES75 Maximum Linear Sound Levels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e126.5 dBZ, 142.5 dBZpk, 123 dBA, with an RMS input level of +6.4 dBV, 50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e110°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 12-inch long-excursion cone drivers; 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 3-inch diaphragm compression drivers coupled to a horn; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMax Long-Term Continuous Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e1100 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eBurst Power (\u0026lt;1 sec)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e2200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eIdle Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e150 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik powerCON TRUE1 TOP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Voltage Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e200 – 240 V AC, 50 or 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAnalog Audio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik XLR 3-pin TOP female input with male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDigital Audio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik etherCON TOP; AVB, Milan Certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIP55 with Neutrik TOP-terminated cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnd frames with captive GuideALinks; 0.5°–9° splay angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e150 lbs. (68 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound PANTHER-W\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics K2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b KSL8\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePANTHER-W is self-powered with amplification and processing built into every cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe K2 is externally amplified and requires L-Acoustics LA-series amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KSL8 is externally amplified and requires d\u0026amp;b D40 or D80 amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow-Frequency Section\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePANTHER-W uses dual 12-inch long-excursion cone drivers for high-output low end.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe K2 also uses dual 12-inch LF drivers in a three-way design.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KSL8 uses dual 10-inch woofers plus side-firing 8-inch drivers for cardioid behavior.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePANTHER-W provides a fixed wide 110-degree pattern for broad audience areas.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe K2 offers mechanically adjustable PANFLEX directivity of 70, 90, or 110 degrees.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KSL8 provides a narrower fixed 80-degree horizontal pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eNetworking\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePANTHER-W carries Milan-certified AVB plus analog input as standard.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe K2 relies on its amplified controllers for AVB or AES3 distribution rather than onboard endpoints.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KSL8 relies on d\u0026amp;b amplifiers and the DS10 for network audio distribution.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePANTHER-W carries an IP55 rating when terminated with Neutrik TOP connectors.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe K2 requires separate weather-protection accessories for outdoor exposure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KSL8 requires the d\u0026amp;b weather-protection kit for outdoor use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem Simplicity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePANTHER-W reduces rack space and cabling since each cabinet is self-contained.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe K2 needs amplifier racks sized to the array, adding weight and infrastructure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe KSL8 likewise needs external amplifier racks proportional to the system size.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs the PANTHER-W compatible with other PANTHER models in the same array?\u003c\/strong\u003e Yes. PANTHER-W shares the PANTHER electrical and physical platform with PANTHER-L and PANTHER-M, so the variants can be combined within a system to tailor horizontal coverage across the array.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat network protocol does it use for AV system integration?\u003c\/strong\u003e The PANTHER-W provides a Milan-certified AVB digital input over etherCON TOP, alongside a standard analog XLR input, for integration with Milan-based distribution and Meyer Sound processing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require external amplifiers?\u003c\/strong\u003e No. Each PANTHER-W cabinet is self-powered with onboard amplification and processing, so no outboard amplifier racks are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e Yes. When connected with cables terminated in Neutrik TOP connectors, the enclosure carries an IP55 ingress rating suitable for outdoor and harsh environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e The PANTHER-W is covered under Meyer Sound's standard product warranty. For warranty, configuration, or support questions, \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918360502508,"sku":"09.326.001.01","price":22550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-panther-w-2200-watt-12-inch-active-line-array-speaker-creation-networks-19916.jpg?v=1757941259"},{"product_id":"meyer-sound-mvp-motor-v-plate","title":"Meyer Sound MVP Motor V Plate - 40.215.184.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MVP Motor Vee Plate is a rigging accessory used to fine-tune the horizontal aim of flown LEO-family line arrays. It attaches to the MG-LEOPARD\/900 grid and other LEO-family grids, providing motor-pickup geometry that lets a technician adjust array azimuth during a hang. For touring and installed line array systems, the MVP simplifies horizontal alignment without repositioning the entire motor or hang point.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mvp-motor-v-plate-creation-networks-66113.jpg?v=1757941264\" alt=\"Meyer Sound MVP Motor Vee Plate line array rigging accessory\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MVP Motor Vee Plate connects between the hoist motor and a LEO-family grid, allowing the array to pivot horizontally for precise audience aim. It is compatible with the MG-LEOPARD\/900 grid as well as the other LEO-family grids, making it a shared accessory across multiple Meyer Sound line array systems. The plate is intended for use with arrays such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e and its associated low-frequency elements. Additional Meyer Sound rigging hardware is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal Aim Adjustment\u003c\/strong\u003e — The Vee Plate geometry lets technicians fine-tune the horizontal aim of a flown array without moving the motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEO-Family Compatibility\u003c\/strong\u003e — It attaches to the MG-LEOPARD\/900 grid and all other LEO-family grids for cross-system use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Pickup Interface\u003c\/strong\u003e — The plate provides the connection point between the hoist motor and the array grid during a flown deployment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArray Alignment Support\u003c\/strong\u003e — It supports accurate azimuth alignment of LEOPARD and 900-LFC arrays for consistent coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMVP Motor Vee Plate rigging accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFine-tunes horizontal aim of LEOPARD and 900-LFC arrays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAttaches to MG-LEOPARD\/900 grid and all other LEO-family grids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.215.184.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918368268524,"sku":"40.215.184.01","price":1950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mvp-motor-v-plate-creation-networks-66113.jpg?v=1757941264"},{"product_id":"meyer-sound-pbf-lyon-pull-back-bar-kit","title":"Meyer Sound PBF-LYON PullBack Bar Kit - 40.232.125.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound PBF-LYON PullBack Bar Kit is a rigging accessory that provides pull-back capability for LYON line array systems. It enables extreme downtilt of flown arrays and additional downtilt for ground-stacked configurations, giving system technicians control over the array's vertical aim. The kit is intended for installed and touring LYON deployments where steep coverage angles are required.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-pbf-lyon-pullback-bar-kit-creation-networks-66677.jpg?v=1757941265\" alt=\"Meyer Sound PBF-LYON PullBack Bar Kit line array rigging accessory\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe PBF-LYON PullBack Bar attaches to the rear of a LYON array grid and applies pull-back force so the array can be aimed downward at steep angles for balconies, raked seating, and close audience planes. In flown systems it permits extreme downtilt, while in ground-stacked systems it adds incremental downtilt beyond what the grid alone provides. Always use Meyer Sound's MAPP System Design Tool to verify rigging load ratings before deployment. Additional Meyer Sound line array rigging hardware is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Downtilt for Flown Arrays\u003c\/strong\u003e — The pull-back bar lets flown LYON arrays be aimed at steep downward angles for demanding sightlines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround-Stack Downtilt\u003c\/strong\u003e — It adds incremental downtilt to ground-stacked LYON arrays beyond the grid's native range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Grid Attachment\u003c\/strong\u003e — The bar mounts to the rear attachment points of the LYON grid for controlled pull-back geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAPP-Verified Loading\u003c\/strong\u003e — Rigging load ratings should be confirmed in Meyer Sound's MAPP System Design Tool prior to use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePullBack Bar Kit rigging accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eProvides pull-back for extreme downtilt of flown and ground-stacked LYON arrays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LYON line array systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.232.125.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918372495596,"sku":"40.232.125.01","price":2160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-pbf-lyon-pullback-bar-kit-creation-networks-66677.jpg?v=1757941265"},{"product_id":"meyer-sound-mcf-panther-caster-frame-kit","title":"Meyer Sound MCF-PANTHER Caster Frame Kit - 40.324.200.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MCF-PANTHER Caster Frame Kit is a transport accessory that lets PANTHER line array cabinets be moved and staged as a wheeled block. It is designed to carry fully rigged PANTHER cabinets so arrays can be assembled and disassembled efficiently during load-in and load-out. The caster frame streamlines handling of heavy large-format line array elements in touring and installed workflows.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mcf-panther-caster-frame-kit-creation-networks-36647.jpg?v=1757941266\" alt=\"Meyer Sound MCF-PANTHER Caster Frame Kit transport dolly\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MCF-PANTHER Caster Frame provides a rolling base that supports a stack of fully rigged PANTHER cabinets, allowing crews to build array blocks on the ground and roll them into position. Because the cabinets remain linked via their GuideALink rigging, arrays can be assembled and broken down in sections rather than handling each cabinet individually. The frame pairs with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-panther-l-2-200-watt-12-inch-active-line-array-speaker\"\u003ePANTHER-L\u003c\/a\u003e and other PANTHER cabinets. Additional Meyer Sound transport and rigging hardware is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheeled Array Transport\u003c\/strong\u003e — The caster frame moves fully rigged PANTHER cabinets as a single rolling block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlock Assembly and Breakdown\u003c\/strong\u003e — It lets crews build and strike arrays in sections, speeding load-in and load-out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePANTHER Compatibility\u003c\/strong\u003e — The frame is sized specifically for PANTHER large-format line array cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable Rolling Base\u003c\/strong\u003e — Casters provide a stable platform for staging and maneuvering stacked cabinets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaster Frame Kit transport accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTransports fully rigged PANTHER cabinets as a wheeled block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound PANTHER line array cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.324.200.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918379901164,"sku":"40.324.200.01","price":2610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mcf-panther-caster-frame-kit-creation-networks-36647.jpg?v=1757941266"},{"product_id":"meyer-sound-mg-panther-grid-kit","title":"Meyer Sound MG-PANTHER Grid Kit - 40.324.400.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MG-PANTHER Grid Kit is the primary flying grid for PANTHER large-format line array systems. It provides the top-of-array pickup structure from which PANTHER cabinets are suspended in flown deployments, with pickup points for hoist motors and pull-back hardware. The grid is a core rigging component for touring and installed PANTHER arrays.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mg-panther-grid-kit-creation-networks-32893.jpg?v=1757941267\" alt=\"Meyer Sound MG-PANTHER Grid Kit line array flying grid\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MG-PANTHER grid attaches to the top of a PANTHER array and provides the structural interface between the hoist motor and the suspended cabinets. It supports the GuideALink rigging used by PANTHER cabinets and provides pickup geometry for setting array trim and aim. Always use Meyer Sound's MAPP System Design Tool to verify rigging load ratings and array configuration before flying. The grid is used with \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-panther-l-2-200-watt-12-inch-active-line-array-speaker\"\u003ePANTHER-L\u003c\/a\u003e and other PANTHER cabinets. Additional Meyer Sound rigging hardware is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePANTHER Array Pickup\u003c\/strong\u003e — The grid provides the top-of-array structure from which PANTHER cabinets are flown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor and Pull-Back Interface\u003c\/strong\u003e — Pickup points accommodate hoist motors and pull-back hardware for trim and aim control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuideALink Compatibility\u003c\/strong\u003e — It works with the captive GuideALink rigging built into PANTHER cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAPP-Verified Loading\u003c\/strong\u003e — Rigging load ratings and array geometry should be confirmed in Meyer Sound's MAPP System Design Tool before flying.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFlying grid rigging accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop-of-array pickup grid for flown PANTHER line arrays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound PANTHER line array cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.324.400.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918386389228,"sku":"40.324.400.01","price":7720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mg-panther-grid-kit-creation-networks-32893.jpg?v=1757941267"},{"product_id":"meyer-sound-panther-pullover-cover-for-4-speakers","title":"Meyer Sound Panther Pullover Cover for 4 Speakers - 79.324.111.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound Panther Pullover Cover for 4 Speakers is a protective transport cover sized for a stack of four PANTHER line array cabinets. It slips over a rigged block of cabinets to guard finishes and grilles during transport and storage. The cover is a practical accessory for crews moving PANTHER arrays between venues.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-panther-pullover-cover-for-4-speakers-creation-networks-61306.jpg?v=1757941268\" alt=\"Meyer Sound Panther pullover cover for four line array cabinets\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis pullover cover is designed to fit over four PANTHER cabinets staged on a caster frame, protecting enclosures and grilles from dust, abrasion, and incidental moisture during transport. It complements the caster-frame workflow used to move arrays as wheeled blocks, keeping a stack of cabinets road ready. The cover is sized for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-panther-l-2-200-watt-12-inch-active-line-array-speaker\"\u003ePANTHER\u003c\/a\u003e line array. Additional Meyer Sound covers and accessories are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Cabinet Coverage\u003c\/strong\u003e — The cover is sized to slip over a stack of four PANTHER cabinets at once.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish and Grille Protection\u003c\/strong\u003e — It shields enclosures and grilles from dust, abrasion, and incidental moisture in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster-Frame Workflow\u003c\/strong\u003e — The pullover design suits cabinets staged on a caster frame for block transport.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoad-Ready Durability\u003c\/strong\u003e — Durable cover material keeps PANTHER stacks protected during repeated load-in and load-out.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePullover transport cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eStack of four PANTHER cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound PANTHER line array cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e79.324.111.04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918393368812,"sku":"79.324.111.04","price":1590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-panther-pullover-cover-for-4-speakers-creation-networks-61306.jpg?v=1757941268"},{"product_id":"meyer-sound-leopard-us-std-pwrcnn-3p-loop","title":"Meyer Sound LEOPARD Line Array Loudspeaker - Standard (3-pin) - 09.243.201.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD is a compact, self-powered linear line array loudspeaker built for high-output sound reinforcement in small- to medium-sized touring and fixed installations. With 110-degree horizontal coverage in a lightweight cabinet, this compact line array speaker delivers high intelligibility and low distortion for venues such as theaters, clubs, and houses of worship. This standard 3-pin configuration provides balanced analog audio input for straightforward integration into installed AV systems. As part of Meyer Sound's LEO family, LEOPARD pairs onboard amplification with precise directional control.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-m80-narrow-coverage-linear-line-array-loudspeaker-3-pin-with-weather-protection-creation-networks-47176.webp?v=1757941274\" alt=\"Meyer Sound LEOPARD compact self-powered line array loudspeaker, 3-pin standard\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eLEOPARD integrates two 9-inch long-excursion cone drivers and a 3-inch compression driver coupled to a constant-directivity horn through a patented REM manifold, driven by a three-channel class D amplifier rated at 3900 W peak. Its self-powered design and Native Mode allow excellent performance out of the box with minimal external processing, while QuickFly rigging with captive GuideALinks sets splay angles from 0.5 to 15 degrees. This standard 3-pin model accepts balanced analog audio over XLR. For low-frequency extension, LEOPARD pairs with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003e750-LFC\u003c\/a\u003e and other LFC elements, and integrators may also compare it with the larger-format \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-panther-l-2-200-watt-12-inch-active-line-array-speaker\"\u003ePANTHER-L\u003c\/a\u003e. Additional Meyer Sound line array products are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Self-Powered Design\u003c\/strong\u003e — Onboard three-channel class D amplification removes the need for external amplifier racks in a lightweight 75 lb cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110-degree Horizontal Coverage\u003c\/strong\u003e — Wide, consistent coverage with strong phase coherence suits a broad range of room shapes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Output, Low Distortion\u003c\/strong\u003e — A 142 dB maximum SPL with THD below 0.02 percent delivers high headroom with clean reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNative Mode Operation\u003c\/strong\u003e — Optimized factory tuning yields strong performance out of the box with minimal external processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly GuideALink Rigging\u003c\/strong\u003e — Captive rigging sets splay angles from 0.5 to 15 degrees for fast, repeatable array assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 3-Pin Analog Input\u003c\/strong\u003e — XLR 3-pin connectors accept balanced audio for direct integration into installed AV systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Remote Monitoring Ready\u003c\/strong\u003e — LEOPARD works with Meyer Sound's RMS system for comprehensive parameter monitoring from a host computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEO-Family Integration\u003c\/strong\u003e — Galileo GALAXY product-integration files allow use as fill within LYON and LEO-M systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — High intelligibility and wide coverage support speech and music in worship spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Compact arrays deliver even coverage and headroom for theater and auditorium programs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Lightweight, scalable arrays adapt to varied events in multi-purpose venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Hands Room\u003c\/strong\u003e — Clear full-bandwidth reproduction serves large corporate presentation spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e92 Hz – 18 kHz ±30 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e142 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e133.5 dB (M-noise, 18 dB crest factor); 130 dB (Pink noise); 134.5 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e110°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 9-inch long-excursion cone drivers; 2 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 3-inch diaphragm compression driver coupled to a constant-directivity horn via REM manifold; 4 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-channel, open-loop, class D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3900 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSafety Rated Voltage Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output (balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 26.93 in (684 mm) x H 11.11 in (282 mm) x D 21.66 in (550 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e75 lb (34.0 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaptive GuideALinks; 0.5° to 15° splay angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound LEOPARD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics Kara II\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b Y8\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD is self-powered with a three-channel class D amplifier in each cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II is externally amplified and requires L-Acoustics LA-series controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 is externally amplified and requires d\u0026amp;b amplifiers such as the D20 or D80.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow-Frequency Section\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD uses dual 9-inch long-excursion cone drivers for its size class.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II uses dual 8-inch LF drivers in a two-way configuration.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 uses a single 8-inch LF driver with a constant-directivity horn.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD provides a fixed 110-degree horizontal pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II offers mechanically variable directivity via fins.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 provides an 80-degree fixed horizontal pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD reaches a 142 dB maximum SPL in a compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II reaches a comparable 142 dB peak in its class.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 produces slightly lower maximum output suited to its single-woofer design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem Simplicity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD reduces rack space and cabling since amplification is onboard.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II requires amplified controllers sized to the array.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 requires external amplifier racks proportional to the system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD reports parameters through Meyer Sound's RMS remote monitoring system.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II reports through the LA Network Manager at the amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 reports through d\u0026amp;b R1 software at the amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the standard 3-pin configuration mean?\u003c\/strong\u003e The standard 3-pin model uses XLR 3-pin connectors that accommodate balanced audio only. A 5-pin variant is available where RMS monitoring signals must travel on the same connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes LEOPARD require external amplifiers?\u003c\/strong\u003e No. Each LEOPARD cabinet is self-powered with an onboard three-channel class D amplifier, so no outboard amplifier racks are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does LEOPARD integrate into a larger Meyer Sound system?\u003c\/strong\u003e Using the Galileo GALAXY Network Platform's product-integration files, LEOPARD can serve as downfill, sidefill, or outfill within LYON and LEO-M systems and pairs with LFC low-frequency elements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat low-frequency options pair with LEOPARD?\u003c\/strong\u003e LEOPARD pairs with Meyer Sound LFC elements such as the 750-LFC and 900-LFC for low-frequency extension in flown or ground-stacked arrays.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e LEOPARD is covered under Meyer Sound's standard product warranty. For warranty, design, or support questions, \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eLEOPARD Power Draw and Rigging Capacity\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eLEOPARD is self-powered, so system planning centres on AC distribution rather than amplifier racks. The current-draw figures below are per cabinet, so multiply by the number of boxes on each circuit when sizing distribution for a flown array.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eAC Current Draw (per cabinet)\u003c\/th\u003e\n\u003cth\u003e100 V AC\u003c\/th\u003e\n\u003cth\u003e115 V AC\u003c\/th\u003e\n\u003cth\u003e230 V AC\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIdle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.49 A\u003c\/td\u003e\n\u003ctd\u003e0.46 A\u003c\/td\u003e\n\u003ctd\u003e0.35 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eContinuous (longer than 10 s)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.4 A\u003c\/td\u003e\n\u003ctd\u003e3.0 A\u003c\/td\u003e\n\u003ctd\u003e1.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBurst (under 1 s)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.5 A\u003c\/td\u003e\n\u003ctd\u003e4.4 A\u003c\/td\u003e\n\u003ctd\u003e2.3 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eRigging Configuration\u003c\/th\u003e\n\u003cth\u003eMaximum Flown LEOPARD Cabinets\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMG-LEOPARD\/900 multipurpose grid\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 23 LEOPARD cabinets at a 5:1 safety factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMTF-LYON\/LEOPARD transition frame\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 10 LEOPARD cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSplay angle range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5° to 15°, set with captive GuideALinks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMeyer Sound Line Array Comparison: LINA vs LEOPARD vs LEOPARD-M80 vs PANTHER\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eIntegrators specifying LEOPARD usually shortlist it against the smaller LINA, the narrow-coverage LEOPARD-M80 and the large-format PANTHER. Every figure below is taken from the current Meyer Sound datasheet for that model.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eLINA\u003c\/th\u003e\n\u003cth\u003eLEOPARD\u003c\/th\u003e\n\u003cth\u003eLEOPARD-M80\u003c\/th\u003e\n\u003cth\u003ePANTHER-L\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e138 dB\u003c\/td\u003e\n\u003ctd\u003e142 dB\u003c\/td\u003e\n\u003ctd\u003e142 dB\u003c\/td\u003e\n\u003ctd\u003e150.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating frequency range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e65 Hz – 18 kHz\u003c\/td\u003e\n\u003ctd\u003e55 Hz – 18 kHz\u003c\/td\u003e\n\u003ctd\u003e55 Hz – 18 kHz\u003c\/td\u003e\n\u003ctd\u003e55 Hz – 16 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHorizontal coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100°\u003c\/td\u003e\n\u003ctd\u003e110°\u003c\/td\u003e\n\u003ctd\u003e80°\u003c\/td\u003e\n\u003ctd\u003e80°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLow-frequency drivers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo 6.5-inch cone\u003c\/td\u003e\n\u003ctd\u003eTwo 9-inch cone\u003c\/td\u003e\n\u003ctd\u003eTwo 9-inch cone\u003c\/td\u003e\n\u003ctd\u003eTwo 12-inch cone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHigh-frequency drivers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne 3-inch compression\u003c\/td\u003e\n\u003ctd\u003eOne 3-inch compression\u003c\/td\u003e\n\u003ctd\u003eOne 3-inch compression\u003c\/td\u003e\n\u003ctd\u003eTwo 3-inch compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e43 lb (19.5 kg)\u003c\/td\u003e\n\u003ctd\u003e75 lb (34.0 kg)\u003c\/td\u003e\n\u003ctd\u003e75 lb (34.0 kg)\u003c\/td\u003e\n\u003ctd\u003e150 lb (68 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eAmplification:\u003c\/strong\u003e LEOPARD and LEOPARD-M80 each carry a three-channel class D amplifier rated at 3900 W peak, exactly double LINA's 1950 W peak. \u003cstrong\u003eLinear peak SPL:\u003c\/strong\u003e LEOPARD is rated at 133.5 dB with an 18 dB crest factor (M-noise), LEOPARD-M80 at 135 dB with a 19 dB crest factor, and LINA at 132 dB with a 19 dB crest factor. \u003cstrong\u003eCoverage variants:\u003c\/strong\u003e PANTHER is also offered as PANTHER-M at 95° horizontal coverage and PANTHER-W at 110°, rated at 150.5 dB and 149.5 dB maximum SPL respectively.\u003c\/p\u003e\n\u003ch3\u003eMatching Subwoofer: the Meyer Sound 900-LFC\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eThe 900-LFC compact low-frequency control element is the low-frequency partner designed around the LEOPARD rigging system. It flies in the same array on the MG-LEOPARD\/900 multipurpose grid using the same captive GuideALinks as the loudspeaker, with the optional MRK-900 rigging kit, so no transition frame is required.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e900-LFC Specification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne 18-inch dual-coil, long-excursion cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating frequency range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 Hz – 125 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLinear peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e133 dB (M-noise, crest factor above 10 dB); 133 dB (pink noise); 134.5 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-channel class D, 3100 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e136 lb (61.7 kg) without rigging; 159 lb (72.1 kg) with optional rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eW 27.43 in (697 mm) x H 24.43 in (621 mm) x D 24.89 in (632 mm), without rigging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp dir=\"auto\"\u003eThe Meyer Sound LEOPARD datasheet also lists the 1100-LFC and VLFC as compatible low-frequency elements where greater extension or headroom is required.\u003c\/p\u003e\n\u003ch3\u003eWhat Is in the Box and What You Add\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eLEOPARD arrives as a complete, self-contained loudspeaker. The cabinet includes the onboard three-channel class D amplifier, the captive GuideALink rigging used to set 0.5° to 15° splay angles, a powerCON 20 AC input with loop output, and — in this standard configuration — an XLR 3-pin female balanced audio input with a male loop output. No external amplifier or DSP rack is needed for basic operation.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eOrdered separately to complete a working system:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC looping cables\u003c\/strong\u003e — powerCON looping cables such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-pwrcn-loop-ca-1-0m-sjto-h07rn-13ga-us-ce\"\u003eassembled 1-metre LEOPARD AC looping cable\u003c\/a\u003e chain power between cabinets in an array.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlown rigging\u003c\/strong\u003e — the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-mg-leopard-900-lfc-grid-kit\"\u003eMG-LEOPARD\/900-LFC grid kit\u003c\/a\u003e for standard arrays, or the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-mtf-lyon-leopard-sl-trnsn-frame-kit\"\u003eLEOPARD SL transition frame kit\u003c\/a\u003e to hang LEOPARD beneath a LYON array.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround-stack hardware\u003c\/strong\u003e — the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-groundstack-downtilt-kit-mg-leopard-900\"\u003eMG-LEOPARD\/900 ground-stack down-tilt kit\u003c\/a\u003e, plus AF-LEOPARD\/900-LFC angle feet which provide 3° to 8° of ground-stack tilt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport and protection\u003c\/strong\u003e — the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-mcf-leopard-caster-frame-kit\"\u003eMCF-LEOPARD caster frame kit\u003c\/a\u003e, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-pbf-leopard-kit\"\u003ePBF-LEOPARD pull-back bar kit\u003c\/a\u003e, and \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-3-high-pullover-speaker-cover\"\u003e3-high\u003c\/a\u003e or \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-4-high-pullover-speaker-cover\"\u003e4-high\u003c\/a\u003e pullover covers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem processing\u003c\/strong\u003e — a Galileo GALAXY processor such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-galaxy-408-4-input-16-output-digital-processor-1ru\"\u003eGALAXY-408\u003c\/a\u003e or \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-galaxy-816-8-input-16-output-digital-processor-2ru\"\u003eGALAXY-816\u003c\/a\u003e for system drive, delay and array alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather protection\u003c\/strong\u003e — Meyer Sound publishes collapsible and UW rain hood options for LEOPARD\/900-LFC arrays, and LEOPARD is also stocked in dedicated weather-protected configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSystem and Deployment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlan AC, not amplifier racks\u003c\/strong\u003e — every cabinet needs a mains feed within the 100–240 V AC, 50–60 Hz safety-rated range; size circuits from the burst and continuous current figures above.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessing\u003c\/strong\u003e — Native Mode delivers factory-tuned performance with minimal external processing. Meyer Sound positions the Galileo GALAXY Network Platform as the system processor when LEOPARD, LEOPARD-M80 and the 900-LFC are combined into a scalable system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow frequency\u003c\/strong\u003e — add 900-LFC, 1100-LFC or VLFC elements for low-frequency extension in flown or ground-stacked arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigging verification\u003c\/strong\u003e — check the intended array against the flown-cabinet limits above and work through the LEOPARD\/900-LFC rigging assembly guide before hanging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector choice\u003c\/strong\u003e — the XLR 5-pin version of LEOPARD carries balanced audio plus RMS monitoring signals on a single connector; this standard 3-pin version carries balanced audio only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign data\u003c\/strong\u003e — Meyer Sound publishes EASE acoustic data plus 2D and 3D AutoCAD files for LEOPARD to support prediction and drawing work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocumentation and Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.meyersound.com\/pdf\/leopard_ds_e2.pdf\"\u003eLEOPARD \/ LEOPARD-M80 datasheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.meyersound.com\/pdf\/leopard_oi_b5.pdf\"\u003eLEOPARD \/ LEOPARD-M80 operating instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.meyersound.com\/products\/docs\/leopard_900-lfc_rigging_ag_b.pdf\"\u003eLEOPARD \/ 900-LFC rigging assembly guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.meyersound.com\/pdf\/900-lfc_ds_d3.pdf\"\u003e900-LFC datasheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.meyersound.com\/products\/en\/leopard.html\"\u003eMeyer Sound LEOPARD document library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/meyersound.com\/product\/leopard\/\"\u003eMeyer Sound LEOPARD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLEOPARD Comparison and Compatibility FAQs\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eLEOPARD or LINA — which one fits my room?\u003c\/strong\u003e LEOPARD is the larger of the two by a clear margin: 142 dB maximum SPL from dual 9-inch drivers and a 3900 W peak amplifier in a 75 lb cabinet, against LINA's 138 dB from dual 6.5-inch drivers and a 1950 W peak amplifier in a 43 lb cabinet. LEOPARD also extends lower, to 55 Hz rather than 65 Hz, and covers 110° horizontally versus 100°. LINA wins on weight and cabinet size for smaller rooms and tight sightlines.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWhen should I step up from LEOPARD to PANTHER?\u003c\/strong\u003e PANTHER-L produces 150.5 dB maximum SPL from dual 12-inch cone drivers and two 3-inch compression drivers — roughly 8.5 dB more than LEOPARD — but weighs 150 lb, double LEOPARD's 75 lb. Choose PANTHER for large-scale touring and long-throw arena work, and LEOPARD where weight, truck space and roof rigging capacity matter more than absolute output.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWhat is the difference between LEOPARD and LEOPARD-M80?\u003c\/strong\u003e The cabinet, drivers, amplifier and 75 lb weight are identical. LEOPARD covers 110° horizontally while LEOPARD-M80 narrows to 80° for longer throw and tighter focus, and the M80 is rated slightly higher for linear peak SPL at 135 dB with a 19 dB crest factor versus 133.5 dB with an 18 dB crest factor.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eHow many LEOPARD cabinets can be flown in one array?\u003c\/strong\u003e On the MG-LEOPARD\/900 multipurpose grid, up to 23 LEOPARD cabinets can be flown at a 5:1 safety factor. Suspended from the MTF-LYON\/LEOPARD transition frame, the limit is 10 LEOPARD cabinets. Always confirm the specific configuration against the LEOPARD\/900-LFC rigging assembly guide.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eHow much AC current does each LEOPARD draw?\u003c\/strong\u003e Per cabinet at 115 V AC, LEOPARD draws 0.46 A at idle, 3.0 A continuously for periods longer than 10 seconds, and 4.4 A in bursts under 1 second. At 230 V the same figures are 0.35 A, 1.5 A and 2.3 A, and at 100 V they are 0.49 A, 3.4 A and 5.5 A.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWhich subwoofer flies in the same array as LEOPARD?\u003c\/strong\u003e The 900-LFC is the matching compact low-frequency control element and shares LEOPARD's rigging, so it flies in the same array on the MG-LEOPARD\/900 grid without a transition frame. The 1100-LFC and VLFC are also listed as compatible where more extension or headroom is needed.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eDo I need a Galileo GALAXY processor?\u003c\/strong\u003e Not for basic operation — Native Mode provides factory-tuned performance with minimal external processing. Meyer Sound specifies the Galileo GALAXY Network Platform for scalable systems that combine LEOPARD with LEOPARD-M80 and the 900-LFC, and GALAXY is also what loads the product-integration files used when LEOPARD works as fill within LYON and LEO-M systems.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eCan LEOPARD be used outdoors?\u003c\/strong\u003e Yes, with the right configuration. Meyer Sound publishes collapsible and UW rain hood installation guides for LEOPARD\/900-LFC arrays, and Creation Networks stocks LEOPARD in dedicated weather-protected variants for permanently exposed installations.\u003c\/p\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-m80-us-std-pwrcnn-3p-loop\"\u003eMeyer Sound LEOPARD-M80 narrow-coverage line array loudspeaker, 3-pin\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered low-frequency element\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-mg-leopard-900-lfc-grid-kit\"\u003eMeyer Sound MG-LEOPARD\/900-LFC grid kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-galaxy-816-8-input-16-output-digital-processor-2ru\"\u003eMeyer Sound GALAXY-816 digital processor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-panther-l-2-200-watt-12-inch-active-line-array-speaker\"\u003eMeyer Sound PANTHER-L large-format line array loudspeaker\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918410801388,"sku":"09.243.201.02","price":13990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-m80-narrow-coverage-linear-line-array-loudspeaker-3-pin-with-weather-protection-creation-networks-47176.webp?v=1757941274"},{"product_id":"meyer-sound-leopard-us-w-p-qclip-pwrcnn","title":"Meyer Sound LEOPARD Line Array Loudspeaker - Quick Clip Rain Hood 3-pin (with Weather Protection) - 09.243.201.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD Line Array Loudspeaker in this Quick Clip Rain Hood, 3-pin (with Weather Protection) configuration is a compact, self-powered line array engineered for outdoor and semi-exposed installations. It combines LEOPARD's 110-degree coverage and high-output performance with factory weather protection and a quick-clip rain hood for fixed deployments exposed to the elements. This compact line array speaker suits outdoor venues, amphitheaters, and houses of worship with exterior coverage requirements. Onboard amplification and a standard 3-pin analog input simplify AV system integration.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-m80-narrow-coverage-linear-line-array-loudspeaker-3-pin-with-weather-protection-creation-networks-47176.webp?v=1757941274\" alt=\"Meyer Sound LEOPARD weather-protected line array with quick clip rain hood, 3-pin\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis LEOPARD model carries Meyer Sound's weather protection treatment and a Quick Clip rain hood designed to shed water away from the cabinet face in permanent outdoor installations. The underlying loudspeaker shares LEOPARD's two 9-inch cone drivers, 3-inch compression driver on a REM-manifold horn, and three-channel class D amplifier rated at 3900 W peak. The standard 3-pin XLR input accepts balanced analog audio for direct integration. For low-frequency extension outdoors, LEOPARD pairs with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003e750-LFC\u003c\/a\u003e, and the standard indoor configuration is the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD Standard 3-pin\u003c\/a\u003e. Additional Meyer Sound line array products are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Weather Protection\u003c\/strong\u003e — Meyer Sound's weather treatment guards internal components for fixed outdoor and semi-exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Clip Rain Hood\u003c\/strong\u003e — The quick-clip rain hood directs water away from the cabinet face in permanent outdoor deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Self-Powered Design\u003c\/strong\u003e — Onboard three-channel class D amplification removes external amplifier racks in a 75 lb cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110-degree Horizontal Coverage\u003c\/strong\u003e — Wide, consistent coverage with strong phase coherence suits varied outdoor seating areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Output, Low Distortion\u003c\/strong\u003e — A 142 dB maximum SPL with THD below 0.02 percent provides headroom and clean reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 3-Pin Analog Input\u003c\/strong\u003e — XLR 3-pin connectors accept balanced audio for direct AV system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly GuideALink Rigging\u003c\/strong\u003e — Captive rigging sets splay angles from 0.5 to 15 degrees for repeatable array builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Remote Monitoring Ready\u003c\/strong\u003e — Works with Meyer Sound's RMS system for parameter monitoring from a host computer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Weather-protected coverage serves outdoor worship gatherings and exterior campuses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Open-air amphitheaters benefit from high-output, weather-resistant arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Covered outdoor multi-purpose spaces gain durable, scalable reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Hands Room\u003c\/strong\u003e — Outdoor all-hands and campus gatherings receive clear, full-bandwidth coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e92 Hz – 18 kHz ±30 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e142 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e133.5 dB (M-noise, 18 dB crest factor); 130 dB (Pink noise); 134.5 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e110°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 9-inch long-excursion cone drivers; 2 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 3-inch diaphragm compression driver coupled to a constant-directivity horn via REM manifold; 4 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-channel, open-loop, class D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3900 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSafety Rated Voltage Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output (balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFactory weather protection with Quick Clip rain hood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 26.93 in (684 mm) x H 11.11 in (282 mm) x D 21.66 in (550 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e75 lb (34.0 kg) (base loudspeaker)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaptive GuideALinks; 0.5° to 15° splay angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound LEOPARD WP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics Kara II\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b Y8\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis LEOPARD is self-powered with onboard class D amplification in each cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II is externally amplified and requires L-Acoustics LA-series controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 is externally amplified and requires d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis model ships with factory weather protection and a quick-clip rain hood for permanent outdoor use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II requires separate weather-protection accessories for outdoor exposure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 requires the d\u0026amp;b weather-protection kit for outdoor installations.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD provides a fixed 110-degree horizontal pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II offers mechanically variable directivity via fins.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 provides an 80-degree fixed horizontal pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD reaches a 142 dB maximum SPL in a compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II reaches a comparable 142 dB peak in its class.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 produces slightly lower maximum output suited to its single-woofer design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem Simplicity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD reduces rack space and cabling since amplification is onboard.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II requires amplified controllers sized to the array.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 requires external amplifier racks proportional to the system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD reports parameters through Meyer Sound's RMS remote monitoring system.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II reports through LA Network Manager at the amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 reports through d\u0026amp;b R1 software at the amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the weather protection and rain hood add?\u003c\/strong\u003e This configuration includes Meyer Sound's factory weather treatment plus a Quick Clip rain hood, allowing the cabinet to be used in permanent outdoor and semi-exposed installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this still a self-powered loudspeaker?\u003c\/strong\u003e Yes. The weather-protected model retains LEOPARD's onboard three-channel class D amplification, so no external amplifier racks are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it integrate into a larger Meyer Sound system?\u003c\/strong\u003e Through the Galileo GALAXY Network Platform's product-integration files, it can serve as fill within LYON and LEO-M systems and pairs with LFC low-frequency elements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the rain hood affect rigging?\u003c\/strong\u003e The loudspeaker retains QuickFly GuideALink rigging with 0.5 to 15 degree splay angles; verify array geometry and loading in Meyer Sound's MAPP System Design Tool, accounting for the hood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e The loudspeaker is covered under Meyer Sound's standard product warranty. For warranty, design, or support questions, \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918529847532,"sku":"09.243.201.04","price":15160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-m80-narrow-coverage-linear-line-array-loudspeaker-3-pin-with-weather-protection-creation-networks-47176.webp?v=1757941274"},{"product_id":"meyer-sound-leopard-us-w-p-fold-pwrcnn","title":"Meyer Sound LEOPARD Line Array Loudspeaker - 3-pin (with Weather Protection) - 09.243.301.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD Line Array Loudspeaker, 3-pin (with Weather Protection) is a compact, self-powered line array configured for fixed outdoor and semi-exposed installations. It combines LEOPARD's 110-degree coverage and high-output performance with Meyer Sound's factory weather protection treatment. This compact line array speaker suits outdoor venues, amphitheaters, and houses of worship requiring durable exterior coverage. Onboard amplification and a standard 3-pin analog input simplify AV system integration.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-m80-narrow-coverage-linear-line-array-loudspeaker-3-pin-with-weather-protection-creation-networks-47176.webp?v=1757941274\" alt=\"Meyer Sound LEOPARD weather-protected line array loudspeaker, 3-pin\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis weather-protected LEOPARD shares the platform's two 9-inch cone drivers, 3-inch compression driver on a REM-manifold horn, and three-channel class D amplifier rated at 3900 W peak, with Meyer Sound's weather treatment applied for permanent exterior use. The standard 3-pin XLR input accepts balanced analog audio for direct integration into installed systems. For low-frequency extension outdoors, LEOPARD pairs with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003e750-LFC\u003c\/a\u003e, while indoor projects can use the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD Standard 3-pin\u003c\/a\u003e. Additional Meyer Sound line array products are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Weather Protection\u003c\/strong\u003e — Meyer Sound's weather treatment guards internal components for fixed outdoor and semi-exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Self-Powered Design\u003c\/strong\u003e — Onboard three-channel class D amplification removes external amplifier racks in a 75 lb cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110-degree Horizontal Coverage\u003c\/strong\u003e — Wide, consistent coverage with strong phase coherence suits varied outdoor seating areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Output, Low Distortion\u003c\/strong\u003e — A 142 dB maximum SPL with THD below 0.02 percent provides headroom and clean reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 3-Pin Analog Input\u003c\/strong\u003e — XLR 3-pin connectors accept balanced audio for direct AV system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly GuideALink Rigging\u003c\/strong\u003e — Captive rigging sets splay angles from 0.5 to 15 degrees for repeatable array builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Remote Monitoring Ready\u003c\/strong\u003e — Works with Meyer Sound's RMS system for parameter monitoring from a host computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEO-Family Integration\u003c\/strong\u003e — Galileo GALAXY product-integration files allow use as fill within LYON and LEO-M systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Weather-protected coverage serves outdoor worship gatherings and exterior campuses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Open-air amphitheaters benefit from high-output, weather-resistant arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Covered outdoor multi-purpose spaces gain durable, scalable reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Hands Room\u003c\/strong\u003e — Outdoor all-hands and campus gatherings receive clear, full-bandwidth coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e92 Hz – 18 kHz ±30 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e142 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e133.5 dB (M-noise, 18 dB crest factor); 130 dB (Pink noise); 134.5 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e110°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 9-inch long-excursion cone drivers; 2 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 3-inch diaphragm compression driver coupled to a constant-directivity horn via REM manifold; 4 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-channel, open-loop, class D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3900 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSafety Rated Voltage Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output (balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFactory weather protection treatment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 26.93 in (684 mm) x H 11.11 in (282 mm) x D 21.66 in (550 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e75 lb (34.0 kg) (base loudspeaker)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaptive GuideALinks; 0.5° to 15° splay angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound LEOPARD WP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics Kara II\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b Y8\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis LEOPARD is self-powered with onboard class D amplification in each cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II is externally amplified and requires L-Acoustics LA-series controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 is externally amplified and requires d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis model ships with Meyer Sound's factory weather protection for permanent outdoor use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II requires separate weather-protection accessories for outdoor exposure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 requires the d\u0026amp;b weather-protection kit for outdoor installations.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD provides a fixed 110-degree horizontal pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II offers mechanically variable directivity via fins.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 provides an 80-degree fixed horizontal pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD reaches a 142 dB maximum SPL in a compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II reaches a comparable 142 dB peak in its class.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 produces slightly lower maximum output suited to its single-woofer design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem Simplicity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD reduces rack space and cabling since amplification is onboard.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II requires amplified controllers sized to the array.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 requires external amplifier racks proportional to the system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD reports parameters through Meyer Sound's RMS remote monitoring system.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II reports through LA Network Manager at the amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 reports through d\u0026amp;b R1 software at the amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the weather protection add?\u003c\/strong\u003e This configuration includes Meyer Sound's factory weather treatment, allowing the cabinet to be deployed in permanent outdoor and semi-exposed installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this still a self-powered loudspeaker?\u003c\/strong\u003e Yes. The weather-protected model retains LEOPARD's onboard three-channel class D amplification, so no external amplifier racks are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it integrate into a larger Meyer Sound system?\u003c\/strong\u003e Through the Galileo GALAXY Network Platform's product-integration files, it can serve as fill within LYON and LEO-M systems and pairs with LFC low-frequency elements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat low-frequency options pair with this LEOPARD?\u003c\/strong\u003e It pairs with Meyer Sound LFC elements such as the 750-LFC and 900-LFC for low-frequency extension in flown or ground-stacked arrays.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e The loudspeaker is covered under Meyer Sound's standard product warranty. For warranty, design, or support questions, \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918540955884,"sku":"09.243.301.04","price":15160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-m80-narrow-coverage-linear-line-array-loudspeaker-3-pin-with-weather-protection-creation-networks-47176.webp?v=1757941274"},{"product_id":"meyer-sound-leopard-m80-us-std-pwrcnn-3p-loop","title":"Meyer Sound LEOPARD-M80 Narrow Coverage Linear Line Array Loudspeaker, 3-Pin - 09.256.201.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD-M80 is a narrow-coverage variant of the compact, self-powered LEOPARD line array, engineered for applications that require tight, controlled dispersion. With 80-degree horizontal coverage, this compact line array speaker delivers long-throw control for the tops of arrays and as outfill in larger LEOPARD systems. This standard 3-pin configuration accepts balanced analog audio for straightforward AV system integration. Because it matches LEOPARD's acoustical and vertical characteristics, M80 transitions cleanly within mixed arrays.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-m80-narrow-coverage-linear-line-array-loudspeaker-3-pin-with-weather-protection-creation-networks-47176.webp?v=1757941274\" alt=\"Meyer Sound LEOPARD-M80 narrow coverage line array loudspeaker, 3-pin\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eLEOPARD-M80 shares LEOPARD's two 9-inch cone drivers, 3-inch compression driver on a REM-manifold horn, and three-channel class D amplifier rated at 3900 W peak, but provides a controlled 80-degree horizontal pattern for narrow, long-throw coverage. It is used wherever tighter control is needed in LEOPARD arrays, such as at the top of a hang or as full outfill arrays. The standard 3-pin XLR input accepts balanced analog audio. M80 commonly works alongside the wider \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD Standard 3-pin\u003c\/a\u003e and pairs with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003e750-LFC\u003c\/a\u003e for low-frequency extension. Additional Meyer Sound line array products are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNarrow 80-degree Coverage\u003c\/strong\u003e — The controlled 80-degree pattern provides long-throw directivity for array tops and outfill positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustical Match to LEOPARD\u003c\/strong\u003e — M80 matches LEOPARD's vertical coverage and tonal character for clean transitions in mixed arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Self-Powered Design\u003c\/strong\u003e — Onboard three-channel class D amplification removes external amplifier racks in a 75 lb cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Output, Low Distortion\u003c\/strong\u003e — A 142 dB maximum SPL and 135 dB linear peak with THD below 0.02 percent provide headroom and clean reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 3-Pin Analog Input\u003c\/strong\u003e — XLR 3-pin connectors accept balanced audio for direct AV system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly GuideALink Rigging\u003c\/strong\u003e — Captive rigging sets splay angles from 0.5 to 15 degrees for repeatable array builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Remote Monitoring Ready\u003c\/strong\u003e — Works with Meyer Sound's RMS system for parameter monitoring from a host computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEO-Family Integration\u003c\/strong\u003e — Galileo GALAXY product-integration files allow use as fill within LYON and LEO-M systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Narrow long-throw coverage reaches distant seating in deep worship spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Controlled dispersion serves balconies and far-field zones in auditoriums.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Tight pattern control supports outfill and array tops in large multi-purpose rooms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Hands Room\u003c\/strong\u003e — Focused coverage reaches the back of large corporate all-hands spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e92 Hz – 18 kHz ±30 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e142 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e135 dB (M-noise, 19 dB crest factor); 132 dB (Pink noise); 136.5 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 9-inch long-excursion cone drivers; 2 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 3-inch diaphragm compression driver coupled to a constant-directivity horn via REM manifold; 4 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-channel, open-loop, class D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3900 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSafety Rated Voltage Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output (balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 26.93 in (684 mm) x H 11.11 in (282 mm) x D 21.66 in (550 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e75 lb (34.0 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaptive GuideALinks; 0.5° to 15° splay angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound LEOPARD-M80\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics Kara II\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b Y8\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD-M80 is self-powered with onboard class D amplification in each cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II is externally amplified and requires L-Acoustics LA-series controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 is externally amplified and requires d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLEOPARD-M80 provides a fixed narrow 80-degree pattern for long-throw control.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II offers mechanically variable directivity via fins.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 provides a comparable 80-degree fixed horizontal pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eArray Matching\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM80 matches LEOPARD's vertical coverage and tone for clean mixed-array transitions.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II integrates within the K-series family for matched arrays.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 integrates within the d\u0026amp;b Y-series for matched arrays.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM80 reaches 135 dB linear peak with a 19 dB crest factor in its compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II reaches a comparable 142 dB peak with external amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 delivers output appropriate to its single-woofer design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem Simplicity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM80 reduces rack space and cabling since amplification is onboard.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II requires amplified controllers sized to the array.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 requires external amplifier racks proportional to the system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM80 reports parameters through Meyer Sound's RMS remote monitoring system.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II reports through LA Network Manager at the amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 reports through d\u0026amp;b R1 software at the amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow does LEOPARD-M80 differ from standard LEOPARD?\u003c\/strong\u003e M80 provides an 80-degree horizontal pattern for narrow, long-throw control, while standard LEOPARD provides 110 degrees of wider coverage. The two share vertical coverage and tone for clean mixed-array transitions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is M80 typically used in an array?\u003c\/strong\u003e M80 is well-suited to the top of an array for long-throw zones and as full outfill arrays where tighter horizontal control is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require external amplifiers?\u003c\/strong\u003e No. Each LEOPARD-M80 cabinet is self-powered with an onboard three-channel class D amplifier, so no outboard amplifier racks are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it integrate into a larger Meyer Sound system?\u003c\/strong\u003e Through the Galileo GALAXY Network Platform's product-integration files, M80 can serve as fill within LYON and LEO-M systems and pairs with LFC low-frequency elements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e LEOPARD-M80 is covered under Meyer Sound's standard product warranty. For warranty, design, or support questions, \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918550556908,"sku":"09.256.201.02","price":13990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-m80-narrow-coverage-linear-line-array-loudspeaker-3-pin-with-weather-protection-creation-networks-47176.webp?v=1757941274"},{"product_id":"meyer-sound-leopard-m80-us-w-p-qclip-pwrcnn-3p-loop","title":"Meyer Sound LEOPARD-M80 Narrow Coverage Linear Line Array Loudspeaker, Quick Clip Rain Hood 3-pin (with Weather Protection) - 09.256.201.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD-M80 in this Quick Clip Rain Hood, 3-pin (with Weather Protection) configuration is a narrow-coverage, self-powered compact line array built for fixed outdoor and semi-exposed installations. It combines the M80's controlled 80-degree dispersion with Meyer Sound's factory weather protection and a quick-clip rain hood. This compact line array speaker suits amphitheaters, outdoor houses of worship, and exterior long-throw coverage. Onboard amplification and a standard 3-pin analog input simplify AV system integration.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-m80-narrow-coverage-linear-line-array-loudspeaker-3-pin-with-weather-protection-creation-networks-47176.webp?v=1757941274\" alt=\"Meyer Sound LEOPARD-M80 weather-protected narrow coverage line array with quick clip rain hood, 3-pin\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis weather-protected M80 shares the platform's two 9-inch cone drivers, 3-inch compression driver on a REM-manifold horn, and three-channel class D amplifier rated at 3900 W peak, with an 80-degree controlled horizontal pattern for long-throw outdoor coverage. Meyer Sound's weather treatment and a Quick Clip rain hood adapt it to permanent exterior use. The standard 3-pin XLR input accepts balanced analog audio. It commonly works alongside the wider \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD Standard 3-pin\u003c\/a\u003e and pairs with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003e750-LFC\u003c\/a\u003e. Additional Meyer Sound line array products are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Weather Protection\u003c\/strong\u003e — Meyer Sound's weather treatment guards internal components for fixed outdoor and semi-exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Clip Rain Hood\u003c\/strong\u003e — The quick-clip rain hood directs water away from the cabinet face in permanent outdoor deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNarrow 80-degree Coverage\u003c\/strong\u003e — The controlled pattern provides long-throw directivity for distant outdoor seating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Self-Powered Design\u003c\/strong\u003e — Onboard three-channel class D amplification removes external amplifier racks in a 75 lb cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Output, Low Distortion\u003c\/strong\u003e — A 142 dB maximum SPL and 135 dB linear peak with THD below 0.02 percent provide headroom and clean reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 3-Pin Analog Input\u003c\/strong\u003e — XLR 3-pin connectors accept balanced audio for direct AV system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly GuideALink Rigging\u003c\/strong\u003e — Captive rigging sets splay angles from 0.5 to 15 degrees for repeatable array builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustical Match to LEOPARD\u003c\/strong\u003e — M80 matches LEOPARD's vertical coverage and tone for clean transitions in mixed arrays.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Weather-protected long-throw coverage serves outdoor worship and exterior campuses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Open-air amphitheaters benefit from controlled, weather-resistant long-throw arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Covered outdoor multi-purpose spaces gain durable outfill and array-top coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Hands Room\u003c\/strong\u003e — Outdoor all-hands gatherings receive focused coverage to far seating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e92 Hz – 18 kHz ±30 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e142 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e135 dB (M-noise, 19 dB crest factor); 132 dB (Pink noise); 136.5 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 9-inch long-excursion cone drivers; 2 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 3-inch diaphragm compression driver coupled to a constant-directivity horn via REM manifold; 4 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-channel, open-loop, class D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3900 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSafety Rated Voltage Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output (balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFactory weather protection with Quick Clip rain hood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 26.93 in (684 mm) x H 11.11 in (282 mm) x D 21.66 in (550 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e75 lb (34.0 kg) (base loudspeaker)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaptive GuideALinks; 0.5° to 15° splay angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound LEOPARD-M80 WP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics Kara II\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b Y8\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis M80 is self-powered with onboard class D amplification in each cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II is externally amplified and requires L-Acoustics LA-series controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 is externally amplified and requires d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis model ships with factory weather protection and a quick-clip rain hood for permanent outdoor use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II requires separate weather-protection accessories for outdoor exposure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 requires the d\u0026amp;b weather-protection kit for outdoor installations.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM80 provides a fixed narrow 80-degree pattern for long-throw control.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II offers mechanically variable directivity via fins.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 provides a comparable 80-degree fixed horizontal pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM80 reaches 135 dB linear peak with a 19 dB crest factor in its compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II reaches a comparable 142 dB peak with external amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 delivers output appropriate to its single-woofer design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem Simplicity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM80 reduces rack space and cabling since amplification is onboard.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II requires amplified controllers sized to the array.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 requires external amplifier racks proportional to the system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM80 reports parameters through Meyer Sound's RMS remote monitoring system.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II reports through LA Network Manager at the amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 reports through d\u0026amp;b R1 software at the amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the weather protection and rain hood add?\u003c\/strong\u003e This configuration includes Meyer Sound's factory weather treatment plus a Quick Clip rain hood, allowing permanent outdoor and semi-exposed installation of the narrow-coverage M80.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does M80 differ from standard LEOPARD?\u003c\/strong\u003e M80 provides an 80-degree horizontal pattern for long-throw control, while standard LEOPARD provides 110 degrees of wider coverage; both share vertical coverage and tone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this still a self-powered loudspeaker?\u003c\/strong\u003e Yes. The weather-protected model retains M80's onboard three-channel class D amplification, so no external amplifier racks are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it integrate into a larger Meyer Sound system?\u003c\/strong\u003e Through the Galileo GALAXY Network Platform's product-integration files, it can serve as fill within LYON and LEO-M systems and pairs with LFC low-frequency elements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e The loudspeaker is covered under Meyer Sound's standard product warranty. For warranty, design, or support questions, \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918556487916,"sku":"09.256.201.04","price":15160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-m80-narrow-coverage-linear-line-array-loudspeaker-3-pin-with-weather-protection-creation-networks-47176.webp?v=1757941274"},{"product_id":"meyer-sound-leopard-m80-us-w-p-fold-pwrcnn","title":"Meyer Sound LEOPARD-M80 Narrow Coverage Linear Line Array Loudspeaker, 3-Pin (with Weather Protection) - 09.256.301.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD-M80, 3-Pin (with Weather Protection) is a narrow-coverage, self-powered compact line array configured for fixed outdoor and semi-exposed installations. It combines the M80's controlled 80-degree dispersion with Meyer Sound's factory weather protection treatment. This compact line array speaker suits amphitheaters, outdoor houses of worship, and exterior long-throw coverage. Onboard amplification and a standard 3-pin analog input simplify AV system integration.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-m80-narrow-coverage-linear-line-array-loudspeaker-3-pin-with-weather-protection-creation-networks-47176.webp?v=1757941274\" alt=\"Meyer Sound LEOPARD-M80 weather-protected narrow coverage line array loudspeaker, 3-pin\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis weather-protected M80 shares the platform's two 9-inch cone drivers, 3-inch compression driver on a REM-manifold horn, and three-channel class D amplifier rated at 3900 W peak, with an 80-degree controlled horizontal pattern for long-throw outdoor coverage. Meyer Sound's weather treatment adapts it to permanent exterior use. The standard 3-pin XLR input accepts balanced analog audio. It commonly works alongside the wider \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD Standard 3-pin\u003c\/a\u003e and pairs with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003e750-LFC\u003c\/a\u003e for low-frequency extension. Additional Meyer Sound line array products are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Weather Protection\u003c\/strong\u003e — Meyer Sound's weather treatment guards internal components for fixed outdoor and semi-exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNarrow 80-degree Coverage\u003c\/strong\u003e — The controlled pattern provides long-throw directivity for distant outdoor seating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Self-Powered Design\u003c\/strong\u003e — Onboard three-channel class D amplification removes external amplifier racks in a 75 lb cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Output, Low Distortion\u003c\/strong\u003e — A 142 dB maximum SPL and 135 dB linear peak with THD below 0.02 percent provide headroom and clean reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 3-Pin Analog Input\u003c\/strong\u003e — XLR 3-pin connectors accept balanced audio for direct AV system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly GuideALink Rigging\u003c\/strong\u003e — Captive rigging sets splay angles from 0.5 to 15 degrees for repeatable array builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustical Match to LEOPARD\u003c\/strong\u003e — M80 matches LEOPARD's vertical coverage and tone for clean transitions in mixed arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Remote Monitoring Ready\u003c\/strong\u003e — Works with Meyer Sound's RMS system for parameter monitoring from a host computer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Weather-protected long-throw coverage serves outdoor worship and exterior campuses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Open-air amphitheaters benefit from controlled, weather-resistant long-throw arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Covered outdoor multi-purpose spaces gain durable outfill and array-top coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Hands Room\u003c\/strong\u003e — Outdoor all-hands gatherings receive focused coverage to far seating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e92 Hz – 18 kHz ±30 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e142 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e135 dB (M-noise, 19 dB crest factor); 132 dB (Pink noise); 136.5 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 9-inch long-excursion cone drivers; 2 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 3-inch diaphragm compression driver coupled to a constant-directivity horn via REM manifold; 4 Ω nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-channel, open-loop, class D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3900 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSafety Rated Voltage Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output (balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFactory weather protection treatment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 26.93 in (684 mm) x H 11.11 in (282 mm) x D 21.66 in (550 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e75 lb (34.0 kg) (base loudspeaker)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaptive GuideALinks; 0.5° to 15° splay angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound LEOPARD-M80 WP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics Kara II\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b Y8\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis M80 is self-powered with onboard class D amplification in each cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II is externally amplified and requires L-Acoustics LA-series controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 is externally amplified and requires d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThis model ships with Meyer Sound's factory weather protection for permanent outdoor use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II requires separate weather-protection accessories for outdoor exposure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 requires the d\u0026amp;b weather-protection kit for outdoor installations.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM80 provides a fixed narrow 80-degree pattern for long-throw control.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II offers mechanically variable directivity via fins.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 provides a comparable 80-degree fixed horizontal pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM80 reaches 135 dB linear peak with a 19 dB crest factor in its compact cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II reaches a comparable 142 dB peak with external amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 delivers output appropriate to its single-woofer design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem Simplicity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM80 reduces rack space and cabling since amplification is onboard.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II requires amplified controllers sized to the array.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 requires external amplifier racks proportional to the system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM80 reports parameters through Meyer Sound's RMS remote monitoring system.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Kara II reports through LA Network Manager at the amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe Y8 reports through d\u0026amp;b R1 software at the amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the weather protection add?\u003c\/strong\u003e This configuration includes Meyer Sound's factory weather treatment, allowing permanent outdoor and semi-exposed installation of the narrow-coverage M80.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does M80 differ from standard LEOPARD?\u003c\/strong\u003e M80 provides an 80-degree horizontal pattern for long-throw control, while standard LEOPARD provides 110 degrees of wider coverage; both share vertical coverage and tone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this still a self-powered loudspeaker?\u003c\/strong\u003e Yes. The weather-protected model retains M80's onboard three-channel class D amplification, so no external amplifier racks are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it integrate into a larger Meyer Sound system?\u003c\/strong\u003e Through the Galileo GALAXY Network Platform's product-integration files, it can serve as fill within LYON and LEO-M systems and pairs with LFC low-frequency elements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e The loudspeaker is covered under Meyer Sound's standard product warranty. For warranty, design, or support questions, \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918561272044,"sku":"09.256.301.04","price":15160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-m80-narrow-coverage-linear-line-array-loudspeaker-3-pin-with-weather-protection-creation-networks-47176.webp?v=1757941274"},{"product_id":"meyer-sound-leopard-pwrcn-loop-ca-1-0m-sjto-h07rn-13ga-us-ce","title":"Meyer Sound LEOPARD Assembled 1-meter AC looping cables - 28.115.032.03","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD Assembled 1-meter AC Looping Cable is a factory-terminated power link for daisy-chaining AC between LEOPARD cabinets in an array. At one meter in length, it suits cabinet-to-cabinet loop connections within a flown or ground-stacked hang. The cable uses the powerCON-style connectors required by LEOPARD's AC input and loop output.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-assembled-1-meter-ac-looping-cables-creation-networks-56166.jpg?v=1757941276\" alt=\"Meyer Sound LEOPARD assembled 1-meter AC looping cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis assembled looping cable carries AC power from one LEOPARD cabinet's loop output to the next cabinet's input, allowing a string of cabinets to share a single feed within the array's current limits. The one-meter length is sized for the spacing between adjacent cabinets in a vertical array. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e and its weather-protected variants. Additional Meyer Sound cabling and accessories are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Assembled Termination\u003c\/strong\u003e — The cable ships pre-terminated for reliable, repeatable AC loop connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-Meter Loop Length\u003c\/strong\u003e — The length is sized for cabinet-to-cabinet spacing in a vertical LEOPARD array.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epowerCON-Style Connectors\u003c\/strong\u003e — Connectors match LEOPARD's AC input and loop output for direct daisy-chaining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArray Power Distribution\u003c\/strong\u003e — Looping reduces home-run cabling by sharing a feed across linked cabinets within current limits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAssembled AC looping cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e1 meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC power looping between LEOPARD cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LEOPARD line array cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.115.032.03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918580506860,"sku":"28.115.032.03","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-assembled-1-meter-ac-looping-cables-creation-networks-56166.jpg?v=1757941276"},{"product_id":"meyer-sound-leopard-mtf-lyon-leopard-sl-trnsn-frame-kit","title":"Meyer Sound LEOPARD SL Frame Kit - 40.232.140.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD SL Frame Kit is the MTF-LYON\/LEOPARD transition frame, a rigging accessory that lets LEOPARD cabinets be flown as downfill below LYON arrays. It provides the structural transition between the two array types so a single hang can combine LYON main coverage with LEOPARD downfill. The frame is intended for installed and touring LYON systems that add LEOPARD fill.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-sl-frame-kit-creation-networks-24455.jpg?v=1757941277\" alt=\"Meyer Sound LEOPARD SL transition frame kit for LYON downfill\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MTF-LYON\/LEOPARD transition frame flies up to 10 LEOPARD cabinets at a 5:1 safety factor and BGV C1 for downfill below LYON arrays, with some restrictions. It includes rear attachment points for pull-back and collapses for easy transport on top of LEOPARD stacks. Always use Meyer Sound's MAPP System Design Tool to verify rigging load ratings before flying. The frame links the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e below LYON systems. Additional Meyer Sound rigging hardware is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLYON-to-LEOPARD Transition\u003c\/strong\u003e — The frame provides the structural interface to fly LEOPARD as downfill below LYON arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 10 LEOPARD Cabinets\u003c\/strong\u003e — It flies up to 10 LEOPARD cabinets at a 5:1 safety factor and BGV C1, with some restrictions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Pull-Back Points\u003c\/strong\u003e — Rear attachment points accept pull-back hardware for downtilt of the fill section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapsible for Transport\u003c\/strong\u003e — The frame collapses for transport on top of LEOPARD stacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAPP-Verified Loading\u003c\/strong\u003e — Rigging load ratings should be confirmed in Meyer Sound's MAPP System Design Tool before flying.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTransition frame rigging accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFlies LEOPARD downfill below LYON arrays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to 10 LEOPARD cabinets at 5:1 safety factor and BGV C1, with restrictions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LYON and LEOPARD line arrays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.232.140.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918614421740,"sku":"40.232.140.01","price":6250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-sl-frame-kit-creation-networks-24455.jpg?v=1757941277"},{"product_id":"meyer-sound-leopard-mg-leopard-900-lfc-grid-kit","title":"Meyer Sound LEOPARD LFC Grid Kit - 40.243.080.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD LFC Grid Kit is the MG-LEOPARD\/900 multipurpose grid, the primary flying grid for LEOPARD and 900-LFC arrays. It provides the top-of-array pickup structure for flying or ground-stacking mixed arrays of LEOPARD cabinets and 900-LFC low-frequency elements without transition hardware. The grid is a core rigging component for installed and touring LEOPARD systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-lfc-grid-kit-creation-networks-62872.jpg?v=1757941278\" alt=\"Meyer Sound LEOPARD LFC grid kit MG-LEOPARD\/900 multipurpose grid\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MG-LEOPARD\/900 grid flies up to 23 LEOPARD cabinets with a 5:1 safety factor and BGV C1, with some angle restrictions, and supports mixed arrays of LEOPARD and 900-LFC cabinets flown or ground-stacked without transition hardware. It offers multiple and single-center pickup points plus attachment points for brackets and adapters such as lasers and inclinometers. Always use Meyer Sound's MAPP System Design Tool to verify rigging load ratings. It is used with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e. Additional Meyer Sound rigging hardware is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 23 LEOPARD Cabinets\u003c\/strong\u003e — The grid flies up to 23 LEOPARD cabinets at a 5:1 safety factor and BGV C1, with some angle restrictions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed LEOPARD and 900-LFC Arrays\u003c\/strong\u003e — It supports combined LEOPARD and 900-LFC arrays flown or ground-stacked without transition hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Pickup Points\u003c\/strong\u003e — Multiple and single-center pickup points provide flexible trim and aim geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory Attachment Points\u003c\/strong\u003e — Attachment points accommodate brackets and adapters for lasers and inclinometers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAPP-Verified Loading\u003c\/strong\u003e — Rigging load ratings should be confirmed in Meyer Sound's MAPP System Design Tool before flying.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMultipurpose flying grid rigging accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFlies LEOPARD and 900-LFC arrays without transition hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to 23 LEOPARD cabinets at 5:1 safety factor and BGV C1, with angle restrictions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LEOPARD and 900-LFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.243.080.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918622220524,"sku":"40.243.080.01","price":5240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-lfc-grid-kit-creation-networks-62872.jpg?v=1757941278"},{"product_id":"meyer-sound-leopard-mcf-leopard-caster-frame-kit","title":"Meyer Sound LEOPARD Caster Frame Kit - 40.243.130.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD Caster Frame Kit is the MCF-LEOPARD caster frame, a transport accessory that moves and stages fully rigged LEOPARD cabinets as a wheeled block. It carries up to four fully rigged LEOPARD cabinets, making it easy to assemble and disassemble arrays in blocks. The frame is a practical handling solution for touring and installed LEOPARD systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-caster-frame-kit-creation-networks-30974.jpg?v=1757941279\" alt=\"Meyer Sound LEOPARD caster frame kit transport dolly\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MCF-LEOPARD caster frame provides a rolling base that supports up to four fully rigged LEOPARD cabinets, letting crews build array blocks on the ground and roll them into position. Because cabinets remain linked via their GuideALink rigging, arrays can be assembled and broken down in sections rather than handled individually. Durable nylon covers for stacks of three and four cabinets are also available to keep the LEOPARD road ready. The frame supports the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e. Additional Meyer Sound transport hardware is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheeled Array Transport\u003c\/strong\u003e — The caster frame moves up to four fully rigged LEOPARD cabinets as a single rolling block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlock Assembly and Breakdown\u003c\/strong\u003e — It lets crews build and strike arrays in sections, speeding load-in and load-out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEOPARD Compatibility\u003c\/strong\u003e — The frame is sized specifically for LEOPARD compact line array cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Compatibility\u003c\/strong\u003e — Durable nylon covers for stacks of three and four cabinets are available to keep the array road ready.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCaster Frame Kit transport accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTransports up to four fully rigged LEOPARD cabinets as a wheeled block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LEOPARD line array cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.243.130.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918628577516,"sku":"40.243.130.01","price":2960.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-caster-frame-kit-creation-networks-30974.jpg?v=1757941279"},{"product_id":"meyer-sound-leopard-groundstack-downtilt-kit-mg-leopard-900","title":"Meyer Sound LEOPARD Ground Stack Down Tilt Kit - MG-LEOPARD\/900 - 40.243.163.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD Ground Stack Down Tilt Kit is the MG-LEOPARD\/900 ground-stack tilt kit, a rigging accessory that adds downward tilt to ground-stacked LEOPARD and 900-LFC arrays. It includes two angle feet that attach to the rear of the MG-LEOPARD\/900 grid. The kit lets technicians aim a ground-stacked array downward toward the audience.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-ground-stack-down-tilt-kit-mg-leopard900-creation-networks-94382.jpg?v=1757941280\" alt=\"Meyer Sound LEOPARD ground stack down tilt kit angle feet\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe ground-stack tilt kit provides two angle feet that attach to the rear of the MG-LEOPARD\/900 grid and can add up to 8 degrees of tilt to the entire ground-stacked array. This downward aim improves audience coverage when arrays sit on stage decks or risers rather than flown. The kit is used with the MG-LEOPARD\/900 grid and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e. Additional Meyer Sound rigging hardware is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 8 Degrees of Tilt\u003c\/strong\u003e — The angle feet add up to 8 degrees of downward tilt to the entire ground-stacked array.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Grid Mounting\u003c\/strong\u003e — Two angle feet attach to the rear of the MG-LEOPARD\/900 grid for stable support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround-Stack Aim Control\u003c\/strong\u003e — The kit aims ground-stacked arrays downward for improved audience coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEOPARD and 900-LFC Compatible\u003c\/strong\u003e — It works with ground-stacked LEOPARD and 900-LFC arrays on the MG-LEOPARD\/900 grid.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eGround-stack tilt kit rigging accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAdds up to 8 degrees of downward tilt to ground-stacked arrays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo angle feet that attach to the rear of the MG-LEOPARD\/900 grid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound MG-LEOPARD\/900 grid, LEOPARD and 900-LFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.243.163.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918754275564,"sku":"40.243.163.01","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-ground-stack-down-tilt-kit-mg-leopard900-creation-networks-94382.jpg?v=1757941280"},{"product_id":"meyer-sound-leopard-mg-leopard-900-lfc-grid-kit-1","title":"Meyer Sound LEOPARD UW Grid Kit (Discontinued) - 40.243.180.06","description":"\u003cp\u003eMulti-purpose grid for LEOPARD and 900-LFC - can be used for flown or groundstacked systems\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918763057388,"sku":"40.243.180.06","price":6520.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-uw-grid-kit-discontinued-creation-networks-46286.jpg?v=1757941282"},{"product_id":"meyer-sound-leopard-pbf-leopard-kit","title":"Meyer Sound LEOPARD PBF-Leopard Kit - 40.243.185.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD PBF-Leopard Kit is the PBF-LEOPARD pull-back frame, a rigging accessory that provides pull-back for extreme downtilt of LEOPARD and 900-LFC arrays. It enables steep downward aim in flown arrays and adds downtilt to ground-stacked configurations. The frame is intended for installed and touring LEOPARD systems requiring aggressive coverage angles.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-pbf-leopard-kit-creation-networks-10119.jpg?v=1757941291\" alt=\"Meyer Sound LEOPARD PBF-Leopard pull-back frame kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe PBF-LEOPARD pull-back frame applies pull-back force so flown LEOPARD and 900-LFC arrays can be aimed downward at steep angles for balconies, raked seating, and close audience planes. In ground-stacked arrays it allows additional downtilt beyond the grid's native range. Always use Meyer Sound's MAPP System Design Tool to verify rigging load ratings before deployment. The frame works with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e and 900-LFC. Additional Meyer Sound rigging hardware is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Downtilt for Flown Arrays\u003c\/strong\u003e — The pull-back frame lets flown LEOPARD and 900-LFC arrays be aimed at steep downward angles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround-Stack Downtilt\u003c\/strong\u003e — It adds incremental downtilt to ground-stacked arrays beyond the grid's native range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEOPARD and 900-LFC Compatible\u003c\/strong\u003e — The frame supports both LEOPARD cabinets and 900-LFC low-frequency elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAPP-Verified Loading\u003c\/strong\u003e — Rigging load ratings should be confirmed in Meyer Sound's MAPP System Design Tool before use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePull-back frame rigging accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eProvides pull-back for extreme downtilt of flown and ground-stacked arrays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LEOPARD and 900-LFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.243.185.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918976803052,"sku":"40.243.185.01","price":1650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-pbf-leopard-kit-creation-networks-10119.jpg?v=1757941291"},{"product_id":"meyer-sound-leopard-3-high-pullover-speaker-cover","title":"Meyer Sound LEOPARD 3 High Pullover Speaker Cover - 79.243.015.03","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD 3 High Pullover Speaker Cover is a protective transport cover sized for a stack of three LEOPARD cabinets. It slips over a rigged block of cabinets on a caster frame to guard finishes and grilles during transport and storage. The cover is a practical accessory for crews moving LEOPARD arrays between venues.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-4-high-pullover-speaker-cover-creation-networks-15895.jpg?v=1757941292\" alt=\"Meyer Sound LEOPARD 3 high pullover speaker cover\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis pullover cover is designed to fit over three LEOPARD cabinets staged on a caster frame, protecting enclosures and grilles from dust, abrasion, and incidental moisture during transport. It complements the caster-frame workflow used to move arrays as wheeled blocks, keeping a stack of cabinets road ready. The cover is sized for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e. Additional Meyer Sound covers and accessories are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Cabinet Coverage\u003c\/strong\u003e — The cover is sized to slip over a stack of three LEOPARD cabinets at once.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish and Grille Protection\u003c\/strong\u003e — It shields enclosures and grilles from dust, abrasion, and incidental moisture in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster-Frame Workflow\u003c\/strong\u003e — The pullover design suits cabinets staged on a caster frame for block transport.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoad-Ready Durability\u003c\/strong\u003e — Durable nylon material keeps LEOPARD stacks protected during repeated load-in and load-out.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePullover transport cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eStack of three LEOPARD cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LEOPARD line array cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e79.243.015.03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45918988632300,"sku":"79.243.015.03","price":1090.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-4-high-pullover-speaker-cover-creation-networks-15895.jpg?v=1757941292"},{"product_id":"meyer-sound-leopard-4-high-pullover-speaker-cover","title":"Meyer Sound LEOPARD 4 High Pullover Speaker Cover - 79.243.015.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD 4 High Pullover Speaker Cover is a protective transport cover sized for a stack of four LEOPARD cabinets. It slips over a rigged block of cabinets on a caster frame to guard finishes and grilles during transport and storage. The cover is a practical accessory for crews moving LEOPARD arrays between venues.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-4-high-pullover-speaker-cover-creation-networks-15895.jpg?v=1757941292\" alt=\"Meyer Sound LEOPARD 4 high pullover speaker cover\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis pullover cover is designed to fit over four LEOPARD cabinets staged on a caster frame, protecting enclosures and grilles from dust, abrasion, and incidental moisture during transport. It complements the caster-frame workflow used to move arrays as wheeled blocks, keeping a stack of cabinets road ready. The cover is sized for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e. Additional Meyer Sound covers and accessories are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Cabinet Coverage\u003c\/strong\u003e — The cover is sized to slip over a stack of four LEOPARD cabinets at once.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish and Grille Protection\u003c\/strong\u003e — It shields enclosures and grilles from dust, abrasion, and incidental moisture in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster-Frame Workflow\u003c\/strong\u003e — The pullover design suits cabinets staged on a caster frame for block transport.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoad-Ready Durability\u003c\/strong\u003e — Durable nylon material keeps LEOPARD stacks protected during repeated load-in and load-out.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePullover transport cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eStack of four LEOPARD cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LEOPARD line array cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e79.243.015.04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45919008162028,"sku":"79.243.015.04","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-4-high-pullover-speaker-cover-creation-networks-15895.jpg?v=1757941292"},{"product_id":"meyer-sound-leopard-4-high-speaker-wrap-cover","title":"Meyer Sound LEOPARD 4 High Speaker Wrap Cover - 79.243.018.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound LEOPARD 4 High Speaker Wrap Cover is a protective wrap-style transport cover sized for a stack of four LEOPARD cabinets. It wraps around a rigged block of cabinets to guard finishes and grilles during transport and storage. The cover is a practical accessory for crews moving LEOPARD arrays between venues.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-4-high-speaker-wrap-cover-creation-networks-47958.jpg?v=1757941295\" alt=\"Meyer Sound LEOPARD 4 high speaker wrap cover\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis wrap cover is designed to enclose a stack of four LEOPARD cabinets staged on a caster frame, protecting enclosures and grilles from dust, abrasion, and incidental moisture during transport. The wrap-style closure provides access around the stack while keeping the cabinets protected, complementing the caster-frame block-transport workflow. The cover is sized for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eLEOPARD line array\u003c\/a\u003e. Additional Meyer Sound covers and accessories are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Cabinet Coverage\u003c\/strong\u003e — The wrap cover is sized to enclose a stack of four LEOPARD cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWrap-Style Closure\u003c\/strong\u003e — The wrap design provides access around the stack while keeping cabinets protected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish and Grille Protection\u003c\/strong\u003e — It shields enclosures and grilles from dust, abrasion, and incidental moisture in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoad-Ready Durability\u003c\/strong\u003e — Durable material keeps LEOPARD stacks protected during repeated load-in and load-out.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWrap-style transport cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eStack of four LEOPARD cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LEOPARD line array cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e79.243.018.04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45919013208300,"sku":"79.243.018.04","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-leopard-4-high-speaker-wrap-cover-creation-networks-47958.jpg?v=1757941295"},{"product_id":"meyer-sound-lina-compact-linear-line-array-loudspeaker","title":"Meyer Sound LINA Compact Linear Line Array Loudspeaker - 09.270.001.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound LINA compact linear line array loudspeaker delivers high-power, full-range reinforcement for venues that demand a low-profile curvilinear array with reference-grade fidelity. As a self-powered line array loudspeaker, LINA combines exceptional high-frequency headroom, phase coherence, and consistent coverage in a lightweight enclosure. It is well suited to small theaters, houses of worship, theme parks, and permanent AV installations where a compact line array system must reproduce speech and music with high intelligibility. LINA also serves as a supplemental fill loudspeaker within larger LEOPARD line array systems.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-compact-linear-line-array-loudspeaker-3-pin-fixed-rain-hood-with-weather-protection-creation-networks-94571.webp?v=1757941298\" alt=\"Meyer Sound LINA compact linear line array loudspeaker\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eLINA evolved from the MINA loudspeaker and applies the technology developed for the award-winning LEO family, delivering the signature advantages of self-powered design, linear response, and precise directional control. Each cabinet houses two 6.5-inch long-excursion cone drivers and a 3-inch diaphragm compression driver coupled to a constant-directivity horn through a patented REM manifold. An efficient Class D amplifier provides 1950 W peak total output power, reproducing program material from speech and classical music to rock and EDM with low distortion. LINA offers Native Mode for excellent out-of-the-box performance with minimal external processing, and integrates with Meyer Sound's Galileo GALAXY Network Platform for matrix routing, alignment, and array processing. For low-frequency extension, LINA flies directly with the Meyer Sound 750-LFC without transition hardware, while applications needing more headroom can pair it with the 900-LFC. QuickFly rigging with captive GuideALinks supports splay angles up to 11 degrees. Compare LINA with the larger \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e and the flagship \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-panther-l-2-200-watt-12-inch-active-line-array-speaker\"\u003eMeyer Sound PANTHER active line array loudspeaker\u003c\/a\u003e, or pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered subwoofer\u003c\/a\u003e for full-range output.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard amplification and processing simplify system setup and increase reliability by eliminating external amplifier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Amplifier\u003c\/strong\u003e — An efficient Class D amplifier delivers 1950 W peak total output power with linear response across a wide dynamic range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Transducer Complement\u003c\/strong\u003e — Two 6.5-inch long-excursion cone drivers and a 3-inch compression driver on a constant-directivity horn provide full-range reproduction with high intelligibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent 100-Degree Horizontal Coverage\u003c\/strong\u003e — A constant-directivity horn maintains uniform horizontal pattern control across the operating bandwidth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly Rigging\u003c\/strong\u003e — Captive GuideALinks set splay angles up to 11 degrees for fast, repeatable array assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNative Mode Operation\u003c\/strong\u003e — Optimized factory configuration yields excellent system performance out of the box with minimal external processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFC and LEOPARD Integration\u003c\/strong\u003e — LINA flies directly with the 750-LFC and 900-LFC low-frequency control elements and integrates with LEOPARD systems as fill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight Birch Enclosure\u003c\/strong\u003e — A 43 lb premium multi-ply birch cabinet delivers a high power-to-size ratio for portable and installed applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — LINA arrays provide intelligible, even coverage of congregations across the full audible band for spoken word and music.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — The compact line array delivers high-power reinforcement with consistent coverage in small to mid-size theaters and performance halls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Self-powered operation and lightweight rigging make LINA practical for flexible spaces hosting varied program material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Low distortion and phase coherence support reference-grade monitoring and reinforcement in production environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e65 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100 Hz – 18 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e138 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e132 dB with 19 dB crest factor (M-noise), 128 dB (Pink noise), 130 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eVertical Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eVaries with array length and configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Transducers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 6.5-inch long-excursion cone drivers; 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency Transducer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 3-inch diaphragm compression driver on a constant-directivity horn via patented REM manifold; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e1950 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop output; automatic voltage selection 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output; optional XLR 5-pin for balanced audio and RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e20.27 in (515 mm) x 8.38 in (213 mm) x 15.32 in (389 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 lb (19.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eQuickFly end frames with captive GuideALinks; 0° to 11° splay angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound LINA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics Kara II\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b audiotechnik T-Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLINA is self-powered with onboard Class D amplification and processing in every cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eKara II is externally amplified and requires LA-series amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe T-Series is externally amplified and driven by d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow-Frequency Transducers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLINA uses two 6.5-inch cone drivers in a compact format.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eKara II uses two 8-inch low-frequency transducers for a larger format.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe T-Series uses dual high-excursion drivers in a comparably compact module.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem Integration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLINA flies directly with the 750-LFC and integrates with LEOPARD systems as fill.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eKara II integrates within the L-Acoustics K-family and SB subwoofers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe T-Series integrates within the d\u0026amp;b loudspeaker and subwoofer ecosystem.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProcessing Platform\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLINA is driven by the Galileo GALAXY Network Platform with Native Mode tuning.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eKara II relies on L-Acoustics LA Network Manager and amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe T-Series relies on d\u0026amp;b R1 and DS-series processing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight per Cabinet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLINA weighs 43 lb (19.5 kg) per cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eKara II weighs more per cabinet due to its larger format and passive design.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eT-Series cabinets are similarly lightweight in a compact passive design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLINA uses QuickFly rigging with captive GuideALinks for splay angles up to 11 degrees.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eKara II uses L-Acoustics integrated rigging with selectable splay angles.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe T-Series uses d\u0026amp;b integrated rigging hardware.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes LINA require external amplification?\u003c\/strong\u003e\u003cbr\u003eNo. LINA is a self-powered loudspeaker with onboard Class D amplification and processing, so no external amplifier racks are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich subwoofer pairs with LINA?\u003c\/strong\u003e\u003cbr\u003eLINA flies directly with the Meyer Sound 750-LFC without transition hardware, and the 900-LFC can be used where additional low-frequency headroom is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is LINA processed and controlled?\u003c\/strong\u003e\u003cbr\u003eLINA is driven by Meyer Sound's Galileo GALAXY Network Platform for matrix routing, alignment, and array processing, and offers Native Mode for strong out-of-the-box performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan LINA be used with LEOPARD systems?\u003c\/strong\u003e\u003cbr\u003eYes. LINA integrates with LEOPARD line array systems as a supplemental fill loudspeaker and is also effective in standalone or short-stack front-fill and under-balcony applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs LINA covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eLINA is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45919074287852,"sku":"09.270.001.04","price":8280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-compact-linear-line-array-loudspeaker-3-pin-fixed-rain-hood-with-weather-protection-creation-networks-94571.webp?v=1757941298"},{"product_id":"meyer-sound-lina-us-w-p-fold-3pin","title":"Meyer Sound LINA-RIG-WP-3 2 x 6.5\" Active Arrayable Loudspeaker, 3-pin, Rain Hood - 09.270.001.06","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound LINA-RIG-WP-3 is a compact linear line array loudspeaker configured with a folding rain hood and weather protection for outdoor and semi-exposed installations. This self-powered weatherized line array loudspeaker delivers the same high-power, full-range reinforcement as standard LINA while adding environmental protection for the transducers. It is well suited to outdoor houses of worship, theme parks, stadiums, and permanent exterior AV systems that require a low-profile curvilinear array. Each cabinet uses a 3-pin audio configuration and integrates with larger LEOPARD systems as fill.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-compact-linear-line-array-loudspeaker-3-pin-fixed-rain-hood-with-weather-protection-creation-networks-94571.webp?v=1757941298\" alt=\"Meyer Sound LINA-RIG-WP-3 weatherized compact line array loudspeaker with rain hood\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe LINA-RIG-WP-3 builds on the award-winning LEO family technology, delivering the signature advantages of self-powered design, linear response, and precise directional control in a weather-protected enclosure. Each cabinet houses two 6.5-inch long-excursion cone drivers and a 3-inch diaphragm compression driver coupled to a constant-directivity horn through a patented REM manifold, driven by an efficient Class D amplifier rated at 1950 W peak total output power. A folding rain hood shields the transducers from the elements while the cabinet retains the lightweight 43 lb birch construction and QuickFly rigging of standard LINA. This configuration uses an XLR 3-pin female input with male loop output and is driven by Meyer Sound's Galileo GALAXY Network Platform with Native Mode tuning. For low-frequency extension, it flies directly with the Meyer Sound 750-LFC without transition hardware. Compare with the standard \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-lina-compact-linear-line-array-loudspeaker\"\u003eMeyer Sound LINA compact line array loudspeaker\u003c\/a\u003e, the larger \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e, or pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered subwoofer\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather Protection with Folding Rain Hood\u003c\/strong\u003e — A folding rain hood shields the transducers, making the loudspeaker suitable for outdoor and semi-exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard Class D amplification and processing simplify setup and increase reliability without external amplifier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1950 W Peak Output\u003c\/strong\u003e — The efficient Class D amplifier delivers high peak power with linear response across a wide dynamic range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Transducer Complement\u003c\/strong\u003e — Two 6.5-inch cone drivers and a 3-inch compression driver on a constant-directivity horn provide full-range reproduction with high intelligibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin Audio Configuration\u003c\/strong\u003e — An XLR 3-pin female input with male loop output simplifies signal distribution across the array.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly Rigging\u003c\/strong\u003e — Captive GuideALinks set splay angles up to 11 degrees for fast, repeatable array assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFC and LEOPARD Integration\u003c\/strong\u003e — Flies directly with the 750-LFC and integrates with LEOPARD systems as supplemental fill.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Weatherized LINA arrays cover outdoor congregations and courtyards with intelligible full-range sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Suited to open-air theaters and amphitheaters requiring high-power reinforcement with consistent coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Practical for indoor-outdoor flexible venues that host varied program material in changing conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e65 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100 Hz – 18 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e138 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e132 dB with 19 dB crest factor (M-noise), 128 dB (Pink noise), 130 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Transducers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 6.5-inch long-excursion cone drivers; 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency Transducer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 3-inch diaphragm compression driver on a constant-directivity horn via patented REM manifold; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e1950 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop output; automatic voltage selection 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFolding rain hood for outdoor and semi-exposed installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e20.27 in (515 mm) x 8.38 in (213 mm) x 15.32 in (389 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 lb (19.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eQuickFly end frames with captive GuideALinks; 0° to 11° splay angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the weather protection add over standard LINA?\u003c\/strong\u003e\u003cbr\u003eThis configuration includes a folding rain hood that shields the transducers, making the loudspeaker suitable for outdoor and semi-exposed installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this loudspeaker require external amplification?\u003c\/strong\u003e\u003cbr\u003eNo. It is self-powered with onboard Class D amplification and processing, so no external amplifier racks are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich subwoofer pairs with this loudspeaker?\u003c\/strong\u003e\u003cbr\u003eIt flies directly with the Meyer Sound 750-LFC without transition hardware for low-frequency extension.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the loudspeaker processed and controlled?\u003c\/strong\u003e\u003cbr\u003eIt is driven by Meyer Sound's Galileo GALAXY Network Platform and offers Native Mode for strong out-of-the-box performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this loudspeaker covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eIt is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923548037356,"sku":"09.270.001.06","price":9390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-compact-linear-line-array-loudspeaker-3-pin-fixed-rain-hood-with-weather-protection-creation-networks-94571.webp?v=1757941298"},{"product_id":"meyer-sound-lina-us-w-p-fixed-3pin","title":"Meyer Sound LINA Compact Linear Line Array Loudspeaker 3-Pin, Fixed Rain Hood (with Weather Protection) - 09.270.001.05","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound LINA Compact Linear Line Array Loudspeaker with fixed rain hood is a self-powered weatherized line array loudspeaker for permanent outdoor and semi-exposed installations. It delivers the same high-power, full-range reinforcement as standard LINA while a fixed rain hood provides continuous weather protection for the transducers. This 3-pin configuration suits outdoor houses of worship, theme parks, stadiums, and exterior architectural AV systems requiring a low-profile curvilinear array. Each cabinet integrates with larger LEOPARD systems as supplemental fill.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-compact-linear-line-array-loudspeaker-3-pin-fixed-rain-hood-with-weather-protection-creation-networks-94571.webp?v=1757941298\" alt=\"Meyer Sound LINA compact line array loudspeaker with fixed rain hood and weather protection\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis LINA configuration applies the award-winning LEO family technology, delivering self-powered design, linear response, and precise directional control in a permanently weather-protected enclosure. Each cabinet houses two 6.5-inch long-excursion cone drivers and a 3-inch diaphragm compression driver coupled to a constant-directivity horn through a patented REM manifold, driven by an efficient Class D amplifier rated at 1950 W peak total output power. A fixed rain hood provides continuous protection for permanently installed arrays while the cabinet retains the lightweight 43 lb birch construction and QuickFly rigging of standard LINA. The configuration uses an XLR 3-pin female input with male loop output and is driven by Meyer Sound's Galileo GALAXY Network Platform with Native Mode tuning. For low-frequency extension it flies directly with the Meyer Sound 750-LFC without transition hardware. Compare with the standard \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-lina-compact-linear-line-array-loudspeaker\"\u003eMeyer Sound LINA compact line array loudspeaker\u003c\/a\u003e, the larger \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-leopard-line-array-loudspeaker-standard-3-pin\"\u003eMeyer Sound LEOPARD line array loudspeaker\u003c\/a\u003e, or pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered subwoofer\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed Rain Hood Weather Protection\u003c\/strong\u003e — A fixed rain hood provides continuous protection for the transducers in permanent outdoor installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard Class D amplification and processing simplify setup and increase reliability without external amplifier racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1950 W Peak Output\u003c\/strong\u003e — The efficient Class D amplifier delivers high peak power with linear response across a wide dynamic range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Transducer Complement\u003c\/strong\u003e — Two 6.5-inch cone drivers and a 3-inch compression driver on a constant-directivity horn provide full-range reproduction with high intelligibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin Audio Configuration\u003c\/strong\u003e — An XLR 3-pin female input with male loop output simplifies signal distribution across the array.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly Rigging\u003c\/strong\u003e — Captive GuideALinks set splay angles up to 11 degrees for fast, repeatable array assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFC and LEOPARD Integration\u003c\/strong\u003e — Flies directly with the 750-LFC and integrates with LEOPARD systems as supplemental fill.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Weatherized LINA arrays provide intelligible full-range coverage of outdoor congregations and courtyards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Suited to permanently installed open-air theaters and amphitheaters requiring consistent high-power coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Practical for indoor-outdoor flexible venues hosting varied program material in changing conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e65 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100 Hz – 18 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e138 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e132 dB with 19 dB crest factor (M-noise), 128 dB (Pink noise), 130 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Transducers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 6.5-inch long-excursion cone drivers; 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency Transducer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 3-inch diaphragm compression driver on a constant-directivity horn via patented REM manifold; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e1950 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20 input with loop output; automatic voltage selection 90–265 V AC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFixed rain hood for permanent outdoor and semi-exposed installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e20.27 in (515 mm) x 8.38 in (213 mm) x 15.32 in (389 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 lb (19.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eQuickFly end frames with captive GuideALinks; 0° to 11° splay angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference from the folding rain hood version?\u003c\/strong\u003e\u003cbr\u003eThis configuration uses a fixed rain hood, which provides continuous weather protection well suited to permanent outdoor installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this loudspeaker require external amplification?\u003c\/strong\u003e\u003cbr\u003eNo. It is self-powered with onboard Class D amplification and processing, so no external amplifier racks are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich subwoofer pairs with this loudspeaker?\u003c\/strong\u003e\u003cbr\u003eIt flies directly with the Meyer Sound 750-LFC without transition hardware for low-frequency extension.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the loudspeaker processed and controlled?\u003c\/strong\u003e\u003cbr\u003eIt is driven by Meyer Sound's Galileo GALAXY Network Platform and offers Native Mode for strong out-of-the-box performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this loudspeaker covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eIt is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923554001132,"sku":"09.270.001.05","price":9390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-compact-linear-line-array-loudspeaker-3-pin-fixed-rain-hood-with-weather-protection-creation-networks-94571.webp?v=1757941298"},{"product_id":"meyer-sound-pwrcn-loop-ca-1-0m-sjto-h07rn-13ga-us-ce","title":"Meyer Sound LINA Mounting U-Bracket Kit - 40.207.030.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound LINA Mounting U-Bracket Kit is the MUB-MINA\/LINA U-bracket, a mounting accessory for installing LINA loudspeakers in front-fill and under-balcony applications. This LINA mounting bracket secures the cabinets for fixed-install coverage where precise vertical aim is required. It is designed specifically for the Meyer Sound LINA and MINA compact loudspeakers.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-mounting-u-bracket-kit-creation-networks-67074.jpg?v=1757941299\" alt=\"Meyer Sound LINA mounting U-bracket kit MUB-MINA\/LINA\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MUB-MINA\/LINA U-bracket mounts up to four LINA cabinets for front-fill or under-balcony coverage with up to 20 degrees of tilt. It can also pole-mount up to two cabinets when used with a pole-mount adapter, which is not included. The bracket attaches to the M6 attachment points on the LINA enclosure for a secure fit. Pair this bracket with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-lina-compact-linear-line-array-loudspeaker\"\u003eMeyer Sound LINA compact line array loudspeaker\u003c\/a\u003e or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts up to Four Cabinets\u003c\/strong\u003e — The U-bracket supports up to four LINA cabinets for front-fill or under-balcony coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 20 Degrees of Tilt\u003c\/strong\u003e — Adjustable tilt provides precise vertical aim for fixed-install applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole-Mount Capable\u003c\/strong\u003e — Pole-mounts up to two cabinets when used with a pole-mount adapter (adapter not included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect LINA Compatibility\u003c\/strong\u003e — Attaches to the M6 attachment points on LINA and MINA enclosures for a secure fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMUB-MINA\/LINA U-Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LINA and MINA loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum Cabinets\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to four cabinets (front-fill \/ under-balcony); up to two cabinets pole-mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTilt Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to 20 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAttachment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM6 attachment points on LINA\/MINA enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923603906796,"sku":"40.207.030.01","price":510.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-mounting-u-bracket-kit-creation-networks-67074.jpg?v=1757941299"},{"product_id":"meyer-sound-lina-mg-mina-lina-750-lfc-grid-w-glk-assy-kit","title":"Meyer Sound LINA Grid w\/ Glk Assy Kit - 40.207.101.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound LINA Grid with GLK Assembly Kit is the MG-MINA\/LINA multipurpose grid, the flying and ground-stacking rigging grid for LINA line array systems. This LINA rigging grid suspends arrays from single-point or multiple pickup points and supports mixed arrays of LINA and 750-LFC cabinets. It is the primary rigging accessory for assembling flown LINA arrays in touring and installed applications.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-grid-w-glk-assy-kit-creation-networks-62759.jpg?v=1757941301\" alt=\"Meyer Sound LINA grid with GLK assembly kit MG-MINA\/LINA multipurpose grid\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MG-MINA\/LINA multipurpose grid flies up to 16 LINA cabinets with a 5:1 safety factor and meets BGV C1 with some angle restrictions. It offers multiple and single-center pickup points and can also be used to ground-stack arrays. The grid supports mixed arrays of LINA and 750-LFC cabinets flown or ground-stacked without any transition hardware. Always use Meyer Sound's MAPP System Design Tool to verify rigging load ratings. Pair this grid with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-lina-compact-linear-line-array-loudspeaker\"\u003eMeyer Sound LINA compact line array loudspeaker\u003c\/a\u003e and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered subwoofer\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlies up to 16 Cabinets\u003c\/strong\u003e — The grid supports flown arrays of up to 16 LINA cabinets with a 5:1 safety factor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBGV C1 Compliance\u003c\/strong\u003e — Meets BGV C1 with some angle restrictions for overhead rigging applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Pickup Points\u003c\/strong\u003e — Offers multiple and single-center pickup points for flexible array hang configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed LINA and 750-LFC Arrays\u003c\/strong\u003e — Supports flown or ground-stacked mixed arrays of LINA and 750-LFC cabinets without transition hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround-Stack Capable\u003c\/strong\u003e — The grid can also be used as a base for ground-stacked array configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMG-MINA\/LINA Multipurpose Grid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LINA and 750-LFC cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum Flown Cabinets\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to 16 LINA cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSafety Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e5:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging Compliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eBGV C1 (with some angle restrictions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePickup Points\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMultiple and single-center pickup points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923629367532,"sku":"40.207.101.02","price":3360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-grid-w-glk-assy-kit-creation-networks-62759.jpg?v=1757941301"},{"product_id":"meyer-sound-lina-mg-lina-750-lfc-uw-multipurpose-grid-wht","title":"Meyer Sound LINA UW Multipurpose Grid, White (Discontinued) - 40.207.101.05","description":"\u003cp\u003eWhite Color. Multi-purpose grid for flying\/groundstacking LINA\/MINA\/750 arrays. Includes GLK kit for increased load rating when flying 750-LFC.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923641065708,"sku":"40.207.101.05","price":5670.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-uw-multipurpose-grid-white-discontinued-creation-networks-33234.webp?v=1757941302"},{"product_id":"meyer-sound-lina-mg-lina-750-lfc-uw-multipurpose-grid-blk","title":"Meyer Sound LINA UW Multipurpose Grid, Black (Discontinued) - 40.207.101.06","description":"\u003cp\u003eBlack Color. Multi-purpose grid for flying\/groundstacking LINA\/MINA\/750 arrays. Includes GLK kit for increased load rating when flying 750-LFC.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923651911916,"sku":"40.207.101.06","price":5670.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-uw-multipurpose-grid-black-creation-networks-26616.webp?v=1757941303"},{"product_id":"meyer-sound-lina-mcf-mina-lina-caster-frame-kit","title":"Meyer Sound LINA Caster Frame Kit - 40.207.102.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound LINA Caster Frame Kit is the MCF-MINA\/LINA caster frame, a transport accessory for moving fully rigged LINA arrays. This LINA caster frame lets crews assemble and disassemble arrays in blocks, simplifying load-in and load-out for touring and rental applications. It is designed specifically for the Meyer Sound LINA compact line array loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-caster-frame-kit-creation-networks-86984.jpg?v=1757941304\" alt=\"Meyer Sound LINA caster frame kit MCF-MINA\/LINA\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MCF-MINA\/LINA caster frame safely transports up to five fully rigged LINA cabinets, making it easy to assemble and disassemble arrays in blocks. Durable nylon covers for stacks of three, four, and five units are also available to keep the LINA road ready. Pair this caster frame with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-lina-compact-linear-line-array-loudspeaker\"\u003eMeyer Sound LINA compact line array loudspeaker\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransports up to Five Cabinets\u003c\/strong\u003e — The caster frame safely moves up to five fully rigged LINA cabinets at once.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlock Assembly\u003c\/strong\u003e — Crews can assemble and disassemble arrays in blocks for faster load-in and load-out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Nylon Covers\u003c\/strong\u003e — Durable nylon covers for stacks of three, four, and five units keep cabinets road ready.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect LINA Compatibility\u003c\/strong\u003e — Purpose-built for the Meyer Sound LINA compact line array loudspeaker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMCF-MINA\/LINA Caster Frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LINA loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to five fully rigged LINA cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAvailable Covers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDurable nylon covers for stacks of three, four, and five units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923664101612,"sku":"40.207.102.01","price":1440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-caster-frame-kit-creation-networks-86984.jpg?v=1757941304"},{"product_id":"meyer-sound-lina-mya-mina-lina-yoke-kit","title":"Meyer Sound LINA Yoke Kit - 40.207.104.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound LINA Yoke Kit is the MYA-MINA\/LINA yoke, a single-point suspension and pole-mount accessory for LINA arrays. This LINA yoke suspends short arrays from a single point or pole-mounts cabinets on top of a 750-LFC subwoofer. It is designed specifically for the Meyer Sound LINA compact line array loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-yoke-kit-creation-networks-78819.jpg?v=1757941305\" alt=\"Meyer Sound LINA yoke kit MYA-MINA\/LINA\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MYA-MINA\/LINA yoke suspends arrays of up to four LINA cabinets from a single point and pole-mounts up to two cabinets on top of a 750-LFC, with a pole-mount adapter that is not included. It is a versatile rigging accessory for fixed installations and portable setups that require single-point flying. Pair this yoke with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-lina-compact-linear-line-array-loudspeaker\"\u003eMeyer Sound LINA compact line array loudspeaker\u003c\/a\u003e and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered subwoofer\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Point Suspension\u003c\/strong\u003e — Suspends arrays of up to four LINA cabinets from a single point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole-Mount Capable\u003c\/strong\u003e — Pole-mounts up to two cabinets on top of a 750-LFC (pole-mount adapter not included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Rigging\u003c\/strong\u003e — Suited to both fixed installations and portable single-point flying applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect LINA Compatibility\u003c\/strong\u003e — Purpose-built for the Meyer Sound LINA compact line array loudspeaker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMYA-MINA\/LINA Yoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LINA loudspeakers; 750-LFC for pole-mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSingle-Point Suspension\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to four cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePole-Mount Capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to two cabinets on top of a 750-LFC (adapter not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923674947820,"sku":"40.207.104.01","price":3010.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-yoke-kit-creation-networks-78819.jpg?v=1757941305"},{"product_id":"meyer-sound-lina-pbf-lina-pullback-frame-kit","title":"Meyer Sound LINA PullBack Frame Kit - 40.271.080.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound LINA PullBack Frame Kit is the PBF-LINA pull back frame, a rigging accessory that enables extreme array downtilt for LINA systems. This LINA pull back frame attaches to the bottom cabinet of a LINA or 750-LFC array to provide pull-back for steep coverage angles. It is designed specifically for Meyer Sound LINA and 750-LFC arrays.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-pullback-frame-kit-creation-networks-10991.jpg?v=1757941306\" alt=\"Meyer Sound LINA PullBack frame kit PBF-LINA\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe PBF-LINA pull back frame attaches to the bottom cabinet of LINA and 750-LFC arrays and provides pull-back for extreme array downtilt, allowing the lower cabinets to be aimed at steep coverage angles for near-field and balcony fill. It is an essential rigging accessory when array geometry requires aggressive downward tilt. Pair this pull back frame with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-lina-compact-linear-line-array-loudspeaker\"\u003eMeyer Sound LINA compact line array loudspeaker\u003c\/a\u003e and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC powered subwoofer\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Array Downtilt\u003c\/strong\u003e — Provides pull-back that allows the lower cabinets of an array to be aimed at steep downward angles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom-Cabinet Mounting\u003c\/strong\u003e — Attaches to the bottom cabinet of LINA and 750-LFC arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLINA and 750-LFC Compatibility\u003c\/strong\u003e — Works with both LINA loudspeaker and 750-LFC arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise Coverage Control\u003c\/strong\u003e — Supports near-field and balcony fill where aggressive downtilt is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePBF-LINA Pull Back Frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LINA and 750-LFC arrays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eProvides pull-back for extreme array downtilt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAttaches to the bottom cabinet of the array\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923684122860,"sku":"40.271.080.01","price":1270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-lina-pullback-frame-kit-creation-networks-10991.jpg?v=1757941306"},{"product_id":"meyer-sound-lina-mina-4-high-pullover-speaker-cover","title":"Meyer Sound LINA\/MINA 4 High Pullover Speaker Cover - 79.270.160.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound LINA\/MINA 4 High Pullover Speaker Cover is a durable nylon protective cover for a stack of four rigged LINA or MINA cabinets. This LINA speaker cover protects an assembled four-cabinet block during transport and storage, keeping the array road ready. It is designed to slip over a four-high stack mounted on the LINA caster frame.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-linamina-4-high-pullover-speaker-cover-creation-networks-42103.jpg?v=1757941307\" alt=\"Meyer Sound LINA\/MINA 4 high pullover speaker cover\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis pullover cover is made of durable nylon and is sized for a stack of four fully rigged LINA or MINA cabinets, protecting the loudspeakers from dust and abrasion during transport and storage. It pairs with the LINA caster frame, which transports up to five fully rigged cabinets and assembles arrays in blocks. Use this cover with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-lina-compact-linear-line-array-loudspeaker\"\u003eMeyer Sound LINA compact line array loudspeaker\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Four-Cabinet Stacks\u003c\/strong\u003e — Sized for a stack of four fully rigged LINA or MINA cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Nylon Construction\u003c\/strong\u003e — Made of durable nylon to protect cabinets during transport and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster Frame Compatible\u003c\/strong\u003e — Designed to slip over a stack assembled on the LINA caster frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLINA and MINA Compatibility\u003c\/strong\u003e — Fits both Meyer Sound LINA and MINA loudspeaker cabinets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LINA and MINA loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eStack of four cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDurable nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923700900076,"sku":"79.270.160.04","price":830.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-linamina-4-high-pullover-speaker-cover-creation-networks-42103.jpg?v=1757941307"},{"product_id":"meyer-sound-lina-mina-5-high-pullover-speaker-cover","title":"Meyer Sound LINA\/MINA 5 High Pullover Speaker Cover - 79.270.160.05","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound LINA\/MINA 5 High Pullover Speaker Cover is a durable nylon protective cover for a stack of five rigged LINA or MINA cabinets. This LINA speaker cover protects an assembled five-cabinet block during transport and storage, keeping the array road ready. It is designed to slip over a five-high stack mounted on the LINA caster frame.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-linamina-5-high-pullover-speaker-cover-creation-networks-15134.jpg?v=1757941308\" alt=\"Meyer Sound LINA\/MINA 5 high pullover speaker cover\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis pullover cover is made of durable nylon and is sized for a stack of five fully rigged LINA or MINA cabinets, protecting the loudspeakers from dust and abrasion during transport and storage. It pairs with the LINA caster frame, which transports up to five fully rigged cabinets and assembles arrays in blocks. Use this cover with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-lina-compact-linear-line-array-loudspeaker\"\u003eMeyer Sound LINA compact line array loudspeaker\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Five-Cabinet Stacks\u003c\/strong\u003e — Sized for a stack of five fully rigged LINA or MINA cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Nylon Construction\u003c\/strong\u003e — Made of durable nylon to protect cabinets during transport and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaster Frame Compatible\u003c\/strong\u003e — Designed to slip over a full five-high stack assembled on the LINA caster frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLINA and MINA Compatibility\u003c\/strong\u003e — Fits both Meyer Sound LINA and MINA loudspeaker cabinets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound LINA and MINA loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eStack of five cabinets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDurable nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45923716333804,"sku":"79.270.160.05","price":1040.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-linamina-5-high-pullover-speaker-cover-creation-networks-15134.jpg?v=1757941308"},{"product_id":"meyer-sound-galaxy-408-4-input-16-output-digital-processor-1ru","title":"Meyer Sound GALAXY-408 4-Input 16-Output Digital Processor, 1RU - 09.237.001.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound Galileo GALAXY 408 is a Milan-certified network processor and loudspeaker management platform that provides comprehensive system control, optimization, and monitoring in a single 1RU rack-mount chassis. It serves as the central DSP and audio routing engine for Meyer Sound loudspeaker systems in both fixed-install and touring applications. The GALAXY 408 offers four processed inputs selectable as analog, AES3, or AVB, plus AVB matrix inputs, feeding eight analog outputs and up to sixteen AVB output channels. Open-source AVB networking and 96 kHz processing make it well suited to installed AV systems requiring precise loudspeaker management.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-galaxy-408-4-input-16-output-digital-processor-1ru-creation-networks-61826.webp?v=1757941593\" alt=\"Meyer Sound Galileo GALAXY 408 Digital Signal Processor\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe GALAXY 408 combines audio routing, system optimization, processing, and monitoring in an FPGA-based platform running at a 96 kHz sample rate with 24-bit converters. Input processing includes gain, 500 ms delay, 5-band parametric EQ, and 5-band U-Shaping EQ, while each output adds polarity reversal, 10-band parametric EQ, Low-Mid Beam Control, atmospheric correction, Product Integration, and simultaneous high- and low-pass filters with slopes up to 48 dB per octave. A sparse 32 x 16 summing and delay matrix lets any input route to any combination of outputs with cross-point delay. Being Milan certified, it provides plug-and-play interoperability with other Milan devices over redundant AVB networks with fixed, guaranteed-latency audio transport. The GALAXY 408 is controlled with Compass software on Mac or PC, the Compass Go iPad app, or Spacemap Go for immersive spatial mixing, and it integrates with the SIM audio analyzer and third-party controllers such as AMX and Crestron. For systems requiring more physical analog I\/O, the larger \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eGALAXY 816\u003c\/a\u003e shares the same processing in a 2RU chassis, and the platform pairs naturally with Meyer Sound self-powered and IntelligentDC loudspeakers from the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound range\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilan-Certified AVB Networking\u003c\/strong\u003e — Provides plug-and-play interoperability with other Milan devices over redundant AVB networks with fixed, guaranteed latency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Input Selection\u003c\/strong\u003e — Four processed inputs are selectable as analog, AES3, or AVB, with 24 additional AVB matrix inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSixteen-Channel Output Routing\u003c\/strong\u003e — Provides eight analog outputs and up to sixteen AVB output channels for large loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e96 kHz Processing\u003c\/strong\u003e — FPGA-based DSP runs at a 96 kHz sample rate with 24-bit A\/D and D\/A conversion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Output Processing\u003c\/strong\u003e — Each output offers 10-band parametric EQ, Low-Mid Beam Control, atmospheric correction, Product Integration, and 48 dB per octave filters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-Point Matrix\u003c\/strong\u003e — A sparse 32 x 16 summing and delay matrix routes any input to any combination of outputs with independent cross-point delay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Control Options\u003c\/strong\u003e — Controlled via Compass software, the Compass Go iPad app, or Spacemap Go for immersive spatial sound design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSIM Analyzer Integration\u003c\/strong\u003e — A rear-panel SIM bus port lets the processor act as a line switcher for the SIM audio analyzer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Serves as the central loudspeaker management and routing processor for distributed worship sound systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Provides system optimization, matrix routing, and monitoring for auditorium and performing-arts loudspeaker rigs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Manages and processes audio for reconfigurable multi-purpose spaces requiring flexible routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Supports networked audio processing and monitoring in broadcast and production facilities.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eInput Connectors\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e4 gold-plated XLR-F; 2 RJ-45 network ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Inputs\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e4 processed (analog, AES3, or AVB) plus 24 AVB unprocessed matrix inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOutput Connectors\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8 gold-plated XLR-M; 2 RJ-45 network ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Outputs\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAnalog outputs 1–8; outputs 9–16 AVB only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSelectable Max Input Level\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e+16 dBu or +26 dBu BAL (10 kΩ BAL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMaximum Output Level\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e+16 dBu or +26 dBu (selectable), 2 kΩ BAL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMatrix\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSparse 32 x 16 summing and delay matrix; 500 ms cross-point delay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDigital Conversion\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e24-bit resolution, 96 kHz sample rate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eProcessor\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFPGA-based audio processing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNetwork\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo RJ-45 ports for single or redundant networks; Milan certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20; 100–240 VAC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e1 RU: W 19.00 in (483 mm) x H 1.74 in (44 mm) x D 16.14 in (410 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e13.2 lb (6.0 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e0° C to +45° C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound GALAXY 408\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eBSS Soundweb London\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eBiamp Tesira\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePrimary role\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe GALAXY 408 is a dedicated loudspeaker management and system optimization processor tuned for Meyer Sound systems.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSoundweb London is a general-purpose installed-sound DSP platform for routing, mixing, and zone processing.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTesira is a scalable conferencing and installed-audio DSP platform spanning many room types.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNetworking\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe GALAXY 408 uses Milan-certified AVB with guaranteed fixed latency and supported network redundancy.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSoundweb London typically uses Dante or BLU link audio transport rather than Milan AVB.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTesira commonly uses AVB or Dante depending on the chosen hardware modules.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLoudspeaker integration\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eProduct Integration phase-matches different Meyer Sound loudspeaker models for coherent summation.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSoundweb London relies on generic DSP blocks rather than manufacturer-matched loudspeaker libraries.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTesira applies generic EQ and crossover tools without Meyer Sound model-specific correction.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpatial audio\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe GALAXY 408 hosts Spacemap Go for immersive spatial sound design and mixing.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSoundweb London does not provide a native immersive spatial mixing application.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTesira focuses on conferencing and routing rather than spatial sound design.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeasurement integration\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eA SIM bus port lets the GALAXY 408 act as a line switcher for the SIM audio analyzer.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSoundweb London has no equivalent dedicated analyzer line-switching port.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTesira does not include a manufacturer-specific analyzer bus port.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eForm factor\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe GALAXY 408 is a fixed 1RU processor with defined 4-in \/ 8-analog-out I\/O.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSoundweb London is offered in fixed and modular chassis with varied I\/O counts.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTesira is a modular, card-based system that scales I\/O across larger chassis.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs the GALAXY 408 Milan certified?\u003c\/strong\u003e\u003cbr\u003eYes. The GALAXY 408 is Milan certified, providing plug-and-play interoperability with other Milan devices over AVB with fixed, guaranteed latency and support for redundant networks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many inputs and outputs does the GALAXY 408 have?\u003c\/strong\u003e\u003cbr\u003eIt provides four processed inputs selectable as analog, AES3, or AVB, plus 24 AVB matrix inputs, with eight analog outputs and up to sixteen AVB output channels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat software controls the GALAXY 408?\u003c\/strong\u003e\u003cbr\u003eIt is controlled with Compass Control Software on Mac or PC, the Compass Go iPad app, or Spacemap Go for immersive spatial sound design and mixing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the GALAXY 408 integrate with third-party control systems?\u003c\/strong\u003e\u003cbr\u003eYes. It integrates with third-party controllers such as AMX and Crestron, and connects directly to the SIM audio analyzer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the GALAXY 408 covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. The GALAXY 408 is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943018389740,"sku":"09.237.001.01","price":11490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-galaxy-408-4-input-16-output-digital-processor-1ru-creation-networks-61826.webp?v=1757941593"},{"product_id":"meyer-sound-galaxy-816-8-input-16-output-digital-processor-2ru","title":"Meyer Sound GALAXY-816 8-Input 16-Output Digital Processor, 2RU - 09.230.001.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound GALAXY-816 is an 8-input, 16-output digital signal processor that provides comprehensive loudspeaker management and system optimization for permanent installations and touring rigs. Housed in a 2RU rack-mount chassis, it combines audio routing, processing, and monitoring in a single Milan-certified AVB platform. The processor delivers 96 kHz audio processing with extensive input and output EQ, delay, and matrix capabilities. It is controlled from Compass software on Mac or Windows, the Compass Go iPad app, or Spacemap Go for spatial sound design.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-galaxy-816-8-input-16-output-digital-processor-2ru-creation-networks-89120.png?v=1757941595\" alt=\"Meyer Sound GALAXY-816 8-Input 16-Output Digital Processor 2RU\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Galileo GALAXY 816 Network Platform serves as the central audio processor for Meyer Sound loudspeaker systems, handling routing, optimization, and monitoring from one device. Each of its eight processed inputs can receive analog, AES3, or AVB signals, while its sixteen outputs deliver analog and\/or AVB audio to powered loudspeakers. Input processing includes gain, 500 ms delay, 5-band parametric EQ, and 5-band U-Shaping EQ; output processing adds polarity reversal, 10-band parametric EQ, Low-Mid Beam Control, atmospheric correction, and simultaneous high- and low-pass filters with slopes up to 48 dB per octave. A sparse 32 x 16 summing and delay matrix lets any input feed multiple independently processed outputs across the system. Milan certification provides plug-and-play interoperability with other Milan devices over redundant AVB networks with fixed, guaranteed latency. The rear panel includes two SIM bus ports for direct connection to Meyer Sound's SIM audio analyzer, and the unit integrates with third-party controllers such as AMX and Crestron. For a lower-channel-count alternative, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-galaxy-408-4-input-16-output-digital-processor-1ru\"\u003eMeyer Sound GALAXY-408 4-Input 16-Output Digital Processor\u003c\/a\u003e offers the same processing capability in a 1RU chassis, and the full Meyer Sound range is available in our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilan-Certified AVB\u003c\/strong\u003e — The processor provides plug-and-play interoperability with other Milan-certified devices via AAF and CRF streams with guaranteed fixed latency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Redundancy\u003c\/strong\u003e — Support for redundant AVB networks allows fail-over without audio interruption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible I\/O\u003c\/strong\u003e — Eight processed inputs are selectable as analog, AES3, or AVB, and sixteen outputs deliver analog and\/or AVB signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e96 kHz Processing\u003c\/strong\u003e — Audio conversion and internal processing run at 24-bit resolution and a 96 kHz sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Output Processing\u003c\/strong\u003e — Each output offers gain, 2000 ms delay, polarity reversal, 10-band parametric EQ, 5-band U-Shaping EQ, Product Integration, Low-Mid Beam Control, and atmospheric correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSumming and Delay Matrix\u003c\/strong\u003e — A sparse 32 x 16 matrix assigns gain and delay at each cross point so one loudspeaker can serve multiple processed inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSIM Analyzer Integration\u003c\/strong\u003e — Two SIM 3 bus ports let the unit act as a line switcher for Meyer Sound's SIM audio analyzer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Control Options\u003c\/strong\u003e — The processor is controlled from Compass software, the Compass Go iPad app, or the Spacemap Go spatial mixing app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsole Compatibility\u003c\/strong\u003e — Selectable input and output voltage scaling (+16 dBu or +26 dBu) makes it compatible with most consoles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThird-Party Control\u003c\/strong\u003e — The processor integrates easily with AMX and Crestron control systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Centralized loudspeaker management and system tuning for sanctuary sound reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Multi-zone routing, delay alignment, and optimization for performing arts venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Flexible matrix routing for spaces that reconfigure between presentation and performance use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment Space\u003c\/strong\u003e — Reliable processing and monitoring for council chambers and civic facilities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Networked AVB audio distribution and processing for studio monitoring environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eInput Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8 gold-plated XLR-F, 2 RJ-45 network ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8 processed inputs selectable as analog, AES3 or AVB, plus 24 AVB unprocessed matrix inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSelectable Maximum Input Level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e+16 dBu or +26 dBu BAL (input impedance 10 kΩ BAL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutput Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e16 gold-plated XLR-M, 2 RJ-45 network ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e+16 dBu or +26 dBu (selectable), 2 kΩ BAL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e50 Ω BAL (25 Ω per leg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSumming Matrix\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSparse 32 x 16 (up to 232 of 512 cross points set simultaneously)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDelay Matrix\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSparse 32 x 16; 500 ms delay range at each cross point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDigital Conversion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e24-bit resolution, 96 kHz sample rate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProcessor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFPGA-based audio processing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eNetwork Control\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePrimary\/Secondary 1Gb etherCON Ethernet, Milan AVB-enabled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Voltage Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 VAC, 50–60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e2RU: W 19.00 in (483 mm) x H 3.48 in (88 mm) x D 16.14 in (410 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e16.8 lb (7.6 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e0° C to +45° C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cp\u003eCompared with networked DSP platforms such as the BSS Soundweb London, Biamp Tesira, and QSC Q-SYS Core, the GALAXY-816 is purpose-built for Meyer Sound loudspeaker management rather than general-purpose conferencing or paging. Its Product Integration feature matches the phase characteristics of different Meyer Sound loudspeaker models for the most coherent summation, and its Low-Mid Beam Control and atmospheric correction filters are tailored to large-scale sound reinforcement. While the BSS, Biamp, and QSC platforms offer broad ecosystems for commercial AV, the GALAXY-816 differentiates itself with Milan-certified AVB transport, direct SIM analyzer integration, and Spacemap Go spatial mixing for immersive system design.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat audio formats can the inputs accept?\u003c\/strong\u003e\u003cbr\u003eEach of the eight processed inputs is individually selectable as analog, AES3, or AVB, and the unit also provides 24 AVB unprocessed matrix inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the GALAXY-816 Milan certified?\u003c\/strong\u003e\u003cbr\u003eYes. The processor is Milan certified, providing plug-and-play interoperability with other Milan-certified devices and support for redundant AVB networks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the processor controlled?\u003c\/strong\u003e\u003cbr\u003eIt is controlled from Compass Control Software on Mac or Windows, the Compass Go iPad app, or Spacemap Go, and it integrates with AMX and Crestron systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it differ from the GALAXY-408?\u003c\/strong\u003e\u003cbr\u003eThe GALAXY-408 offers the same audio processing capability in a 1RU chassis with different physical I\/O, while the GALAXY-816 provides eight processed inputs and sixteen outputs in a 2RU chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943020716268,"sku":"09.230.001.01","price":16470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-galaxy-816-8-input-16-output-digital-processor-2ru-creation-networks-89120.png?v=1757941595"},{"product_id":"meyer-sound-40-271-009-01-750-lfc-rigging-endframe-kit","title":"Meyer Sound 40.271.009.01 750-LFC RIGGING ENDFRAME KIT","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound 750-LFC Rigging Endframe Kit adds QuickFly rigging to a 750-LFC subwoofer, providing the end frames and captive GuideALinks needed for flown, ground-stacked, and cardioid array configurations. It converts a no-rig 750-LFC cabinet into a fully arrayable unit compatible with the MG-MINA\/LINA multipurpose grid.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/kisspng-meyer-sound-laboratories-sound-reinforcement-syste-5af3dc93ecc673.8104927015259311559698.webp?v=1757951668\" alt=\"Meyer Sound 750-LFC rigging endframe kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis endframe kit equips a 750-LFC with end frames and captive GuideALinks secured with quick-release pins, enabling subwoofer-array splay angles of 0, 1.5, 3.25, or 4.75 degrees and direct flying from the MG-MINA\/LINA grid without a transition frame. The rigging also supports ground-stacked and cardioid configurations and includes detachable side handles. This kit upgrades the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC subwoofer\u003c\/a\u003e; browse related rigging accessories in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. Meyer Sound's MAPP System Design Tool should always be used to verify rigging load ratings.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly Rigging\u003c\/strong\u003e — The end frames with captive GuideALinks enable flown, ground-stacked, and cardioid configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Splay Angles\u003c\/strong\u003e — The rigging supports subwoofer-array splay angles of 0, 1.5, 3.25, or 4.75 degrees.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid Compatible\u003c\/strong\u003e — It allows the 750-LFC to fly from the MG-MINA\/LINA grid without a transition frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-Release Pins\u003c\/strong\u003e — The GuideALinks are secured with quick-release pins for efficient assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetachable Side Handles\u003c\/strong\u003e — The kit includes detachable side handles for handling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e750-LFC Rigging Endframe Kit (40.271.009.01)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSplay Angles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e0°, 1.5°, 3.25°, 4.75°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eQuick Release Pins\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e0.25 in x 0.53 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConfigurations\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFlown, ground-stacked, and cardioid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e750-LFC subwoofer; MG-MINA\/LINA grid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":46736256041196,"sku":"40.271.009.01","price":2002.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/kisspng-meyer-sound-laboratories-sound-reinforcement-syste-5af3dc93ecc673.8104927015259311559698.webp?v=1757951668"},{"product_id":"meyer-sound-galileo-galaxy-408-8x8-networked-loudspeaker-processor","title":"Meyer Sound Galileo GALAXY 408 – 8x8 Networked Loudspeaker Processor","description":"\u003cp\u003eThe Meyer Sound Galileo GALAXY 408 is a compact networked loudspeaker management processor built to drive and align Meyer Sound line array and point-source systems in a single-space rack footprint. It provides 8 inputs and 8 outputs with 24-bit\/96 kHz processing, Milan-certified AVB networking, and Meyer Sound's full processing toolkit — parametric EQ, U-Shaping EQ, delay matrix, and Product Integration for matching multiple loudspeaker models in one coherent system. The GALAXY 408 suits smaller deployments, monitor systems, or supplemental zones within a larger networked GALAXY system.\u003c\/p\u003e\n\u003cp\u003eHoused in a 1RU, 19-inch rack-mount chassis, the GALAXY 408 shares its processing architecture with the larger GALAXY 816 and 816-AES3, so systems mixing multiple GALAXY models on the same Milan network stay compatible. Control runs through Compass Control Software on Mac or PC, the Compass Go iPad app, or Spacemap Go for spatial audio design. Input processing covers gain, delay, and 5-band parametric\/U-Shaping EQ; output processing adds polarity reversal, 10-band parametric EQ, Low-Mid Beam Control, and atmospheric correction. Two SIM bus ports allow direct connection to Meyer Sound's SIM audio analyzer for on-site measurement and verification. Delay Integration settings let a designer acoustically match different Meyer Sound loudspeaker models — useful when combining downfill, midfill, and main hangs from different product lines in the same system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x8 I\/O\u003c\/strong\u003e — 8 audio inputs (analog or AES\/EBU, selectable in pairs) and 8 analog outputs in a compact 1RU chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilan-certified AVB networking\u003c\/strong\u003e — all audio and control data pass over a single network cable, interoperable with other Milan-certified devices regardless of manufacturer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-bit\/96kHz processing\u003c\/strong\u003e — FPGA-based architecture with up to 64-bit internal resolution for a low noise floor and wide dynamic range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull EQ and delay toolset\u003c\/strong\u003e — 5-band parametric and U-Shaping EQ on inputs, 10-band parametric EQ plus Low-Mid Beam Control on outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in summing and delay matrix\u003c\/strong\u003e — assign gain and delay at every routing cross point, letting a single loudspeaker serve multiple independently processed inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Integration\u003c\/strong\u003e — Delay Integration settings acoustically match different Meyer Sound loudspeaker models combined in the same array.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSIM audio analyzer connectivity\u003c\/strong\u003e — two SIM bus ports for direct on-site measurement without an external interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThird-party control\u003c\/strong\u003e — network-enabled controllers such as Crestron or AMX, plus OSC and text command support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cp\u003eHouses of worship, corporate auditoriums, performing arts venues, touring and rental sound systems, broadcast studios, themed entertainment and immersive venues, multi-purpose rooms.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:45%\"\u003e\n\u003ccol style=\"width:55%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Inputs\u003c\/td\u003e\n\u003ctd\u003e8x XLR-female, analog or AES\/EBU (selectable in pairs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Outputs\u003c\/td\u003e\n\u003ctd\u003e8x XLR-male, analog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSample Rate\u003c\/td\u003e\n\u003ctd\u003e96 kHz audio processing; 24-bit\/96kHz A\/D and D\/A converters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork\u003c\/td\u003e\n\u003ctd\u003e2x EtherCON RJ45, Milan-certified AVB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Software\u003c\/td\u003e\n\u003ctd\u003eCompass Control Software (Mac\/PC), Compass Go (iPad), Spacemap Go (iPad)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis\u003c\/td\u003e\n\u003ctd\u003e1RU, 19\", 16.14 in (410mm) depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e13.2 lb (6.0 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Inlet\u003c\/td\u003e\n\u003ctd\u003epowerCON 20 locking connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSIM Connectivity\u003c\/td\u003e\n\u003ctd\u003e2x SIM bus ports for Meyer Sound SIM audio analyzer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the GALAXY 408 and GALAXY 816?\u003c\/strong\u003e\u003cbr\u003eThe GALAXY 408 provides 8 inputs and 8 outputs in a 1RU chassis, while the GALAXY 816 doubles the output count to 16 in a 2RU chassis. Both share the same processing architecture and can run on the same Milan network.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a GALAXY 408 drive a system alongside GALAXY 816 units?\u003c\/strong\u003e\u003cbr\u003eYes. All GALAXY processors are Milan-certified and interoperate on the same AVB network, so a system can mix 408, 816, and 816-AES3 units as channel count requires.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat loudspeakers does the GALAXY 408 support?\u003c\/strong\u003e\u003cbr\u003eThe GALAXY 408 drives and aligns Meyer Sound's full range of self-powered loudspeaker systems, including line arrays and point-source loudspeakers, using Delay Integration to acoustically match different models in the same system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the GALAXY 408 require a separate control computer at all times?\u003c\/strong\u003e\u003cbr\u003eNo. Compass Control Software runs the system during design and setup, but the GALAXY 408 operates independently once configured; the Compass Go iPad app or third-party controllers like Crestron can also access basic control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you provide system design and commissioning for Galileo GALAXY processors?\u003c\/strong\u003e\u003cbr\u003eYes. Our engineers handle Meyer Sound system design, GALAXY configuration, and commissioning as part of a complete audio system project.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":48345246466284,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/211124_main_image.jpg?v=1789169307"},{"product_id":"meyer-sound-galileo-galaxy-816-8x16-networked-loudspeaker-processor","title":"Meyer Sound Galileo GALAXY 816 – 8x16 Networked Loudspeaker Processor","description":"\u003cp\u003eThe Meyer Sound Galileo GALAXY 816 is a networked loudspeaker management processor built to drive and align larger Meyer Sound line array and point-source systems, with 8 analog or digital inputs and 16 analog outputs in a 2RU chassis. It provides 24-bit\/96 kHz processing, Milan-certified AVB networking, and Meyer Sound's full processing toolkit — parametric EQ, U-Shaping EQ, delay matrix, and Product Integration for matching multiple loudspeaker models in one coherent system. The GALAXY 816's higher output count makes it the standard choice for multi-zone systems and larger line array deployments.\u003c\/p\u003e\n\u003cp\u003eHoused in a 2RU, 19-inch rack-mount chassis, the GALAXY 816 processes audio at up to 64-bit internal resolution with an ultra-low noise floor and roughly 0.6ms of latency from analog input to analog output. Control runs through Compass Control Software on Mac or PC, the Compass Go iPad app, or Spacemap Go for spatial audio design, with straightforward third-party integration for Crestron and similar control systems. Input processing covers gain, delay, and 5-band parametric\/U-Shaping EQ; output processing adds polarity reversal, 10-band parametric EQ, Low-Mid Beam Control, and atmospheric correction. Two SIM bus ports allow direct connection to Meyer Sound's SIM audio analyzer for on-site measurement and verification. The built-in summing and delay matrix lets a designer assign gain and delay at every routing cross point, so a single loudspeaker can serve as an output for multiple independently processed input signals.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x16 I\/O\u003c\/strong\u003e — 8 audio inputs (analog or AES\/EBU, selectable in pairs) and 16 analog outputs in a 2RU chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilan-certified AVB networking\u003c\/strong\u003e — all audio and control data pass over a single network cable, interoperable with other Milan-certified devices regardless of manufacturer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-low latency\u003c\/strong\u003e — approximately 0.6ms analog-in to analog-out, with up to 64-bit internal processing resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull EQ and delay toolset\u003c\/strong\u003e — 5-band parametric and U-Shaping EQ on inputs, 10-band parametric EQ plus Low-Mid Beam Control on outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in summing and delay matrix\u003c\/strong\u003e — assign gain and delay at every routing cross point across all 16 outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Integration\u003c\/strong\u003e — Delay Integration settings acoustically match different Meyer Sound loudspeaker models combined in the same array.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSIM audio analyzer connectivity\u003c\/strong\u003e — two SIM bus ports for direct on-site measurement without an external interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThird-party control\u003c\/strong\u003e — network-enabled controllers such as Crestron or AMX, plus OSC and text command support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cp\u003eLarge performing arts venues, touring and rental sound systems, multi-zone houses of worship, corporate auditoriums and arenas, broadcast studios, themed entertainment and immersive venues, stadiums and large-scale installations.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:45%\"\u003e\n\u003ccol style=\"width:55%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Inputs\u003c\/td\u003e\n\u003ctd\u003e8x XLR-female, analog or AES\/EBU (selectable in pairs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Outputs\u003c\/td\u003e\n\u003ctd\u003e16x XLR-male, analog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSample Rate\u003c\/td\u003e\n\u003ctd\u003e96 kHz audio processing; 24-bit\/96kHz A\/D and D\/A converters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatency\u003c\/td\u003e\n\u003ctd\u003eApproximately 0.6ms, analog in to analog out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork\u003c\/td\u003e\n\u003ctd\u003e2x EtherCON RJ45, Milan-certified AVB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Software\u003c\/td\u003e\n\u003ctd\u003eCompass Control Software (Mac\/PC), Compass Go (iPad), Spacemap Go (iPad)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis\u003c\/td\u003e\n\u003ctd\u003e2RU, 19\", 16.14 in (410mm) depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e16.8 lb (7.6 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Inlet\u003c\/td\u003e\n\u003ctd\u003epowerCON 20 locking connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSIM Connectivity\u003c\/td\u003e\n\u003ctd\u003e2x SIM bus ports for Meyer Sound SIM audio analyzer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the GALAXY 816 and GALAXY 408?\u003c\/strong\u003e\u003cbr\u003eThe GALAXY 816 provides 16 analog outputs in a 2RU chassis, double the GALAXY 408's 8 outputs in a 1RU chassis. Both share the same 8-input count and processing architecture and interoperate on the same Milan network.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the GALAXY 816 and GALAXY 816-AES3?\u003c\/strong\u003e\u003cbr\u003eBoth provide the same 8x16 I\/O count and chassis; the 816-AES3 adds AES\/EBU digital audio output alongside analog, for systems that need a digital audio handoff to other equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a GALAXY 816 drive a full LEO-M or LYON line array system?\u003c\/strong\u003e\u003cbr\u003eYes. The GALAXY 816 is commonly used to drive Meyer Sound's flagship line array systems including LEO-M and LYON, using Delay Integration to acoustically match arrays combining multiple loudspeaker models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many GALAXY processors does a large touring system need?\u003c\/strong\u003e\u003cbr\u003eIt depends on total channel count and zone requirements; multiple GALAXY units network together over Milan\/AVB, so a system scales by adding processors rather than being limited to one unit's I\/O count.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you provide system design and commissioning for Galileo GALAXY processors?\u003c\/strong\u003e\u003cbr\u003eYes. Our engineers handle Meyer Sound system design, GALAXY configuration, and commissioning as part of a complete audio system project.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":48345246564588,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/211124_main_image_5b6afe33-d532-413d-83c1-8bcf4f646ffb.jpg?v=1789169307"},{"product_id":"meyer-sound-galileo-galaxy-816-aes3-8x16-networked-loudspeaker-processor-with-aes","title":"Meyer Sound Galileo GALAXY 816-AES3 – 8x16 Networked Loudspeaker Processor with AES","description":"\u003cp\u003eThe Meyer Sound Galileo GALAXY 816-AES3 is a networked loudspeaker management processor built to drive and align larger Meyer Sound line array and point-source systems, with 8 analog or digital inputs and 16 outputs — available in analog and AES\/EBU digital — in a 2RU chassis. It provides 24-bit\/96 kHz processing, Milan-certified AVB networking, and Meyer Sound's full processing toolkit — parametric EQ, U-Shaping EQ, delay matrix, and Product Integration for matching multiple loudspeaker models in one coherent system. The AES3 digital output makes this model the right choice when downstream equipment expects a digital audio handoff rather than analog.\u003c\/p\u003e\n\u003cp\u003eHoused in a 2RU, 19-inch rack-mount chassis, the GALAXY 816-AES3 shares its core processing architecture with the standard GALAXY 816, running at up to 64-bit internal resolution with an ultra-low noise floor and roughly 0.6ms of latency from input to output. Control runs through Compass Control Software on Mac or PC, the Compass Go iPad app, or Spacemap Go for spatial audio design, with straightforward third-party integration for Crestron and similar control systems. Input processing covers gain, delay, and 5-band parametric\/U-Shaping EQ; output processing adds polarity reversal, 10-band parametric EQ, Low-Mid Beam Control, and atmospheric correction. Two SIM bus ports allow direct connection to Meyer Sound's SIM audio analyzer for on-site measurement and verification. The built-in summing and delay matrix lets a designer assign gain and delay at every routing cross point, so a single loudspeaker can serve as an output for multiple independently processed input signals.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x16 I\/O with AES3 digital output\u003c\/strong\u003e — 8 audio inputs (analog or AES\/EBU, selectable in pairs) and 16 outputs available in analog or AES\/EBU digital, in a 2RU chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilan-certified AVB networking\u003c\/strong\u003e — all audio and control data pass over a single network cable, interoperable with other Milan-certified devices regardless of manufacturer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-low latency\u003c\/strong\u003e — approximately 0.6ms analog-in to analog-out, with up to 64-bit internal processing resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull EQ and delay toolset\u003c\/strong\u003e — 5-band parametric and U-Shaping EQ on inputs, 10-band parametric EQ plus Low-Mid Beam Control on outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in summing and delay matrix\u003c\/strong\u003e — assign gain and delay at every routing cross point across all 16 outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Integration\u003c\/strong\u003e — Delay Integration settings acoustically match different Meyer Sound loudspeaker models combined in the same array.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSIM audio analyzer connectivity\u003c\/strong\u003e — two SIM bus ports for direct on-site measurement without an external interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThird-party control\u003c\/strong\u003e — network-enabled controllers such as Crestron or AMX, plus OSC and text command support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cp\u003eBroadcast studios, large performing arts venues, touring and rental sound systems producing a digital output feed, multi-zone houses of worship, corporate auditoriums and arenas, themed entertainment and immersive venues, stadiums and large-scale installations.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:45%\"\u003e\n\u003ccol style=\"width:55%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Inputs\u003c\/td\u003e\n\u003ctd\u003e8x XLR-female, analog or AES\/EBU (selectable in pairs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Outputs\u003c\/td\u003e\n\u003ctd\u003e16 total, analog or AES\/EBU digital\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSample Rate\u003c\/td\u003e\n\u003ctd\u003e96 kHz audio processing; 24-bit\/96kHz A\/D and D\/A converters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatency\u003c\/td\u003e\n\u003ctd\u003eApproximately 0.6ms, analog in to analog out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork\u003c\/td\u003e\n\u003ctd\u003e2x EtherCON RJ45, Milan-certified AVB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Software\u003c\/td\u003e\n\u003ctd\u003eCompass Control Software (Mac\/PC), Compass Go (iPad), Spacemap Go (iPad)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis\u003c\/td\u003e\n\u003ctd\u003e2RU, 19\", 16.14 in (410mm) depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Inlet\u003c\/td\u003e\n\u003ctd\u003epowerCON 20 locking connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSIM Connectivity\u003c\/td\u003e\n\u003ctd\u003e2x SIM bus ports for Meyer Sound SIM audio analyzer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the GALAXY 816-AES3 and the standard GALAXY 816?\u003c\/strong\u003e\u003cbr\u003eBoth provide the same 8x16 I\/O count and chassis; the 816-AES3 adds AES\/EBU digital audio output alongside analog, for systems that need a digital audio handoff to other equipment such as broadcast or recording chains.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I choose the AES3 model over the standard GALAXY 816?\u003c\/strong\u003e\u003cbr\u003eChoose the 816-AES3 when downstream equipment — a broadcast console, recording system, or digital amplifier — expects an AES\/EBU digital feed rather than analog output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the GALAXY 816-AES3 network with standard GALAXY 408 or 816 units?\u003c\/strong\u003e\u003cbr\u003eYes. All GALAXY processors are Milan-certified and interoperate on the same AVB network regardless of model, so a system can mix analog and AES3 units as required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes using AES3 outputs affect latency or processing?\u003c\/strong\u003e\u003cbr\u003eNo. The 816-AES3 shares the same core processing architecture and approximately 0.6ms latency as the standard GALAXY 816; only the output signal format differs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you provide system design and commissioning for Galileo GALAXY processors?\u003c\/strong\u003e\u003cbr\u003eYes. Our engineers handle Meyer Sound system design, GALAXY configuration, and commissioning as part of a complete audio system project.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":48345246695660,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/211124_main_image_329da114-e4e0-45af-ba07-35a8332466fe.jpg?v=1789169307"}],"url":"https:\/\/creationnetworks.net\/collections\/meyer-sound-line-arrays.oembed","provider":"Creation Networks","version":"1.0","type":"link"}