{"title":"Meyer Sound UPQ \u0026 UPM Installed Point Source Loudspeakers","description":"\u003cp\u003eMeyer Sound UPQ and UPM point source loudspeakers for permanent installation — sanctuaries, performing arts venues, auditoriums, lecture halls and covered outdoor spaces where the loudspeaker is mounted once and has to hold its coverage without further attention. Both series are self-powered, with amplification and processing matched to the drivers inside each cabinet.\u003c\/p\u003e\n\n\u003ch2\u003eUPQ-D1, D2 and D3\u003c\/h2\u003e\n\u003cp\u003eThe UPQ series is a 15-inch two-way active loudspeaker built for fixed installs needing precise directional pattern control. The three models are acoustically similar and differ in horizontal coverage, which lets a designer match dispersion to the room geometry rather than applying one pattern everywhere and correcting later. Weather-protected versions are specified for covered exterior and high-humidity locations. Cradle-style yoke kits, pickup array plates and eye bolt kits handle the mounting.\u003c\/p\u003e\n\n\u003ch2\u003eUPM-1P and UPM-1XP\u003c\/h2\u003e\n\u003cp\u003eUPM is the ultracompact end of the range — a 2x5-inch cabinet for fill, under-balcony coverage, delay positions and small rooms where a UPQ would be too much box. The 1XP is available with EN-3 and Phoenix connectors in standard and weather-resistant builds, so the connector scheme can stay consistent with the rest of an installed system. Mounting yokes, U-brackets and HD nutplate brackets are stocked alongside.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing between them\u003c\/h2\u003e\n\u003cp\u003eStart with throw distance and required SPL at the furthest seat, then pick the coverage pattern from the room's width and depth. UPQ carries the main coverage in mid-size and larger rooms; UPM fills the zones the mains do not reach cleanly. The two are routinely specified together in one design. Where the loudspeaker needs to disappear into the architecture instead, the Ashby in-ceiling and miniature range is the better fit; where a line array is warranted, LEOPARD and LINA take over.\u003c\/p\u003e\n\n\u003cp\u003eCreation Networks handles coverage modeling, mounting design, installation and commissioning nationwide. Call 888-230-3661 or email sales@creationnetworks.net.\u003c\/p\u003e","products":[{"product_id":"meyer-sound-upq-d1-15-2-way-active-speaker-3-pin-input","title":"Meyer Sound UPQ-D1-3 15\" 2-Way Active Speaker, 3-Pin Input - 09.291.001.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UPQ-D1 is a full-size, wide-coverage self-powered point source loudspeaker for front-of-house and fill applications in installed and portable systems. Its 80-degree horizontal by 50-degree vertical Constant-Q horn covers broad listening areas while maintaining focused vertical control, making it well suited to houses of worship, auditoriums, and multi-purpose performance spaces. A 15-inch neodymium cone driver and 4-inch diaphragm compression driver are powered by an onboard two-channel Class D amplifier rated at 2250 W peak. This 3-pin input version uses a standard XLR connection for straightforward integration into analog signal chains.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-d3-wp-3-15-2-way-active-speaker-with-weather-protection-creation-networks-19658.webp?v=1757941415\" alt=\"Meyer Sound UPQ-D1 15-inch 2-way active point source loudspeaker\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPQ-D1 evolves from the UPQ-1P and UPQ-2P line, using amplifier and processing technology derived from the Meyer Sound LEO family. Its Constant-Q horn provides 80-degree horizontal by 50-degree vertical coverage at the -6 dB points, with a gentle rolloff extending to 100 by 60 degrees at the -10 dB points and uniform attenuation outside the pattern. The vented trapezoidal enclosure is built from premium multi-ply birch with a textured black finish, an integral 38 mm pole-mount receptacle, and 6061-T6 aluminum end plates with M10 threaded rigging points. For a narrower, focused symmetrical pattern, consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d2-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D2\u003c\/a\u003e, or for a wide symmetrical pattern the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d3-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D3\u003c\/a\u003e; the full range is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. Low-frequency extension can be added with a companion subwoofer such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC\u003c\/a\u003e. QuickFly rigging is supported through the MPA-UPQ array plate and MYA-UPQ mounting yoke.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Coverage Pattern\u003c\/strong\u003e — The 80-degree horizontal by 50-degree vertical Constant-Q horn covers broad audience areas with focused vertical control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant-Q Horn\u003c\/strong\u003e — Consistent beamwidth in both planes provides uniform response and predictable coverage throughout the pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch Neodymium LF Driver\u003c\/strong\u003e — A high-power 15-inch neodymium cone driver delivers strong low-frequency output with reduced weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Amplification\u003c\/strong\u003e — An onboard two-channel Class D amplifier provides 2250 W peak output with low distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered\u003c\/strong\u003e — Integrated amplification and processing make the loudspeaker a complete system in a single enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin XLR Input\u003c\/strong\u003e — A standard XLR 3-pin female input with male loop output simplifies analog signal distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Rigging\u003c\/strong\u003e — An integral pole-mount receptacle and M10 aluminum end plates support QuickFly rigging accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship main and fill systems\u003c\/li\u003e\n\u003cli\u003eAuditorium and theatrical sound reinforcement\u003c\/li\u003e\n\u003cli\u003eMulti-purpose performance rooms\u003c\/li\u003e\n\u003cli\u003eGovernment and civic assembly spaces\u003c\/li\u003e\n\u003cli\u003eAll-hands and large meeting venues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz - 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e58 Hz - 18 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e135.5 dB (M-noise, crest factor \u0026gt;17 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage (-6 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80° horizontal x 50° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage (-10 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° horizontal x 60° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch neodymium cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 4-inch diaphragm compression driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel Class D, 2250 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output; differential, 10 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePowerCON 20 input with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eVoltage Selection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAutomatic, 90 - 265 V AC, 50 - 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e483 mm W x 715 mm H x 462 mm D (19.00 x 28.15 x 18.18 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 kg (95 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish; M10 aluminum end plates, 38 mm pole mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound UPQ-D1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics X15 HiQ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b E12\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFormat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D1 is a self-powered two-way point source with a 15-inch low-frequency driver and onboard amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ is a passive 15-inch coaxial point source requiring external L-Acoustics amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 is a passive 12-inch two-way point source driven by an external d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification and processing are built into the UPQ-D1 enclosure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ relies on external amplifier controllers for power and processing.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 relies on external d\u0026amp;b amplifiers for power and processing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D1 provides an 80-degree by 50-degree Constant-Q pattern for wide horizontal coverage.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ offers a rotatable 40-degree by 60-degree pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 offers a rotatable 75-degree by 40-degree pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D1 uses a 15-inch neodymium cone driver for substantial low-frequency output.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ uses a 15-inch coaxial driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 uses a 12-inch low-frequency driver.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D1 supports the optional RMS remote monitoring system through Compass software.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ provides monitoring through its external amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 provides monitoring through its external d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat coverage pattern does the UPQ-D1 provide?\u003c\/strong\u003e\u003cbr\u003eIt uses an 80-degree horizontal by 50-degree vertical Constant-Q horn at the -6 dB points, widening to 100 by 60 degrees at the -10 dB points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the UPQ-D1 differ from the UPQ-D2 and UPQ-D3?\u003c\/strong\u003e\u003cbr\u003eThe UPQ-D1 offers a wide 80 by 50 degree pattern, the UPQ-D2 a focused 50 by 50 degree pattern, and the UPQ-D3 a wide symmetrical 80 by 80 degree pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the UPQ-D1 self-powered?\u003c\/strong\u003e\u003cbr\u003eYes. It includes a two-channel Class D amplifier rated at 2250 W peak with onboard processing, so no external amplifier is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a subwoofer?\u003c\/strong\u003e\u003cbr\u003eYes. A companion subwoofer such as the Meyer Sound 750-LFC can extend low-frequency response for full-range systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924675715308,"sku":"09.291.001.02","price":12030.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-d3-wp-3-15-2-way-active-speaker-with-weather-protection-creation-networks-19658.webp?v=1757941415"},{"product_id":"meyer-sound-upq-d1-us-w-p-3p-pm38mm","title":"Meyer Sound UPQ-D1-WP-3 15\" 2-Way Active Speaker, 3-Pin Input (with Weather Protection) - 09.291.001.08","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UPQ-D1-WP is the weather-protected version of the UPQ-D1, a full-size, wide-coverage self-powered point source loudspeaker for front-of-house and fill applications in installed systems exposed to the elements. Its 80-degree horizontal by 50-degree vertical Constant-Q horn covers broad listening areas while maintaining focused vertical control, making it suitable for houses of worship, auditoriums, and multi-purpose performance spaces, including covered outdoor areas. A 15-inch neodymium cone driver and 4-inch diaphragm compression driver are powered by an onboard two-channel Class D amplifier rated at 2250 W peak. This 3-pin input version uses a standard XLR connection for straightforward integration into analog signal chains.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-d3-wp-3-15-2-way-active-speaker-with-weather-protection-creation-networks-19658.webp?v=1757941415\" alt=\"Meyer Sound UPQ-D1-WP weather-protected 15-inch active point source loudspeaker\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPQ-D1-WP shares the acoustic platform of the UPQ-D1 with Meyer Sound weather protection treatment for greater resistance to environmental exposure. Its Constant-Q horn provides 80-degree horizontal by 50-degree vertical coverage at the -6 dB points, with a gentle rolloff extending to 100 by 60 degrees at the -10 dB points. The vented trapezoidal enclosure is built from premium multi-ply birch with a textured black finish, an integral 38 mm pole-mount receptacle, and 6061-T6 aluminum end plates with M10 threaded rigging points. For the standard non-weather-protected version, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d1-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D1\u003c\/a\u003e; for a narrower focused pattern the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d2-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D2\u003c\/a\u003e, and for a wide symmetrical pattern the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d3-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D3\u003c\/a\u003e. The full range is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. Low-frequency extension can be added with a companion subwoofer such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather Protection\u003c\/strong\u003e — Meyer Sound weather protection treatment increases resistance to environmental exposure in covered outdoor installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Coverage Pattern\u003c\/strong\u003e — The 80-degree horizontal by 50-degree vertical Constant-Q horn covers broad audience areas with focused vertical control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant-Q Horn\u003c\/strong\u003e — Consistent beamwidth in both planes provides uniform response and predictable coverage throughout the pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch Neodymium LF Driver\u003c\/strong\u003e — A high-power 15-inch neodymium cone driver delivers strong low-frequency output with reduced weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Amplification\u003c\/strong\u003e — An onboard two-channel Class D amplifier provides 2250 W peak output with low distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin XLR Input\u003c\/strong\u003e — A standard XLR 3-pin female input with male loop output simplifies analog signal distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Rigging\u003c\/strong\u003e — An integral pole-mount receptacle and M10 aluminum end plates support QuickFly rigging accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship main and fill systems\u003c\/li\u003e\n\u003cli\u003eAuditorium and theatrical sound reinforcement\u003c\/li\u003e\n\u003cli\u003eMulti-purpose performance rooms\u003c\/li\u003e\n\u003cli\u003eGovernment and civic assembly spaces\u003c\/li\u003e\n\u003cli\u003eAll-hands and large meeting venues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz - 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e58 Hz - 18 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e135.5 dB (M-noise, crest factor \u0026gt;17 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage (-6 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80° horizontal x 50° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage (-10 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° horizontal x 60° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch neodymium cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 4-inch diaphragm compression driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel Class D, 2250 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output; differential, 10 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePowerCON 20 input with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eVoltage Selection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAutomatic, 90 - 265 V AC, 50 - 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e483 mm W x 715 mm H x 462 mm D (19.00 x 28.15 x 18.18 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 kg (95 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish with Meyer Sound weather protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound UPQ-D1-WP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics X15 HiQ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b E12\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFormat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D1-WP is a weather-protected self-powered two-way point source with a 15-inch low-frequency driver and onboard amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ is a passive 15-inch coaxial point source requiring external L-Acoustics amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 is a passive 12-inch two-way point source driven by an external d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification and processing are built into the UPQ-D1-WP enclosure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ relies on external amplifier controllers for power and processing.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 relies on external d\u0026amp;b amplifiers for power and processing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D1-WP includes Meyer Sound weather protection treatment for covered outdoor use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ requires a separate weatherized variant for outdoor exposure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 requires a separate weatherized variant for outdoor exposure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D1-WP provides an 80-degree by 50-degree Constant-Q pattern for wide horizontal coverage.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ offers a rotatable 40-degree by 60-degree pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 offers a rotatable 75-degree by 40-degree pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D1-WP supports the optional RMS remote monitoring system through Compass software.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ provides monitoring through its external amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 provides monitoring through its external d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the WP designation mean?\u003c\/strong\u003e\u003cbr\u003eWP indicates Meyer Sound weather protection treatment, increasing the loudspeaker's resistance to environmental exposure in covered outdoor installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat coverage pattern does the UPQ-D1-WP provide?\u003c\/strong\u003e\u003cbr\u003eIt uses an 80-degree horizontal by 50-degree vertical Constant-Q horn at the -6 dB points, widening to 100 by 60 degrees at the -10 dB points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the UPQ-D1-WP self-powered?\u003c\/strong\u003e\u003cbr\u003eYes. It includes a two-channel Class D amplifier rated at 2250 W peak with onboard processing, so no external amplifier is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a subwoofer?\u003c\/strong\u003e\u003cbr\u003eYes. A companion subwoofer such as the Meyer Sound 750-LFC can extend low-frequency response for full-range systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924677681388,"sku":"09.291.001.08","price":13220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-d3-wp-3-15-2-way-active-speaker-with-weather-protection-creation-networks-19658.webp?v=1757941415"},{"product_id":"meyer-sound-upq-d2-15-2-way-active-speaker-3-pin-input","title":"Meyer Sound UPQ-D2-3 15\" 2-Way Active Speaker, 3-Pin Input - 09.292.001.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UPQ-D2 is a full-size self-powered point source loudspeaker with a focused symmetrical coverage pattern for precise, long-throw reinforcement. Its 50-degree horizontal by 50-degree vertical Constant-Q horn concentrates output for deep audience areas and arrayable clusters, making it well suited to auditoriums, houses of worship, and multi-purpose performance spaces. A 15-inch neodymium cone driver and 4-inch diaphragm compression driver are powered by an onboard two-channel Class D amplifier rated at 2250 W peak. This 3-pin input version uses a standard XLR connection for straightforward integration into analog signal chains.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-d3-wp-3-15-2-way-active-speaker-with-weather-protection-creation-networks-19658.webp?v=1757941415\" alt=\"Meyer Sound UPQ-D2 15-inch 2-way active point source loudspeaker\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPQ-D2 shares the UPQ-D platform but provides a focused symmetrical pattern that supports precise coverage and arrayability in horizontal or vertical clusters. Its Constant-Q horn delivers 50-degree horizontal by 50-degree vertical coverage at the -6 dB points, widening to 60 by 60 degrees at the -10 dB points with uniform attenuation outside the pattern. The vented trapezoidal enclosure is built from premium multi-ply birch with a textured black finish, an integral 38 mm pole-mount receptacle, and 6061-T6 aluminum end plates with M10 threaded rigging points. For wider horizontal coverage, consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d1-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D1\u003c\/a\u003e, or for a wide symmetrical pattern the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d3-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D3\u003c\/a\u003e; the full range is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. Low-frequency extension can be added with a companion subwoofer such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC\u003c\/a\u003e. QuickFly rigging is supported through the MPA-UPQ array plate and MYA-UPQ mounting yoke.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocused Symmetrical Pattern\u003c\/strong\u003e — The 50-degree by 50-degree Constant-Q horn affords precise coverage and arrayability in horizontal or vertical clusters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant-Q Horn\u003c\/strong\u003e — Consistent beamwidth in both planes provides uniform response and predictable coverage throughout the pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Output\u003c\/strong\u003e — A linear peak SPL of 138 dB supports long-throw and high-headroom applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch Neodymium LF Driver\u003c\/strong\u003e — A high-power 15-inch neodymium cone driver delivers strong low-frequency output with reduced weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Amplification\u003c\/strong\u003e — An onboard two-channel Class D amplifier provides 2250 W peak output with low distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin XLR Input\u003c\/strong\u003e — A standard XLR 3-pin female input with male loop output simplifies analog signal distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Rigging\u003c\/strong\u003e — An integral pole-mount receptacle and M10 aluminum end plates support QuickFly rigging accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAuditorium and theatrical sound reinforcement\u003c\/li\u003e\n\u003cli\u003eHouse of worship main and longer-throw systems\u003c\/li\u003e\n\u003cli\u003eMulti-purpose performance rooms\u003c\/li\u003e\n\u003cli\u003eGovernment and civic assembly spaces\u003c\/li\u003e\n\u003cli\u003eAll-hands and large meeting venues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz - 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e58 Hz - 18 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e138 dB (M-noise, 19 dB crest factor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage (-6 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e50° horizontal x 50° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage (-10 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e60° horizontal x 60° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch neodymium cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 4-inch diaphragm compression driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel Class D, 2250 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output; differential, 10 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePowerCON 20 input with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eVoltage Selection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAutomatic, 90 - 265 V AC, 50 - 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e483 mm W x 715 mm H x 462 mm D (19.00 x 28.15 x 18.18 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 kg (95 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish; M10 aluminum end plates, 38 mm pole mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound UPQ-D2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics X15 HiQ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b E12\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFormat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D2 is a self-powered two-way point source with a 15-inch low-frequency driver and onboard amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ is a passive 15-inch coaxial point source requiring external L-Acoustics amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 is a passive 12-inch two-way point source driven by an external d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification and processing are built into the UPQ-D2 enclosure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ relies on external amplifier controllers for power and processing.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 relies on external d\u0026amp;b amplifiers for power and processing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D2 provides a focused 50-degree by 50-degree symmetrical Constant-Q pattern for precise, long-throw coverage.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ offers a rotatable 40-degree by 60-degree pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 offers a rotatable 75-degree by 40-degree pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMaximum Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D2 reaches a 138 dB linear peak SPL for high-headroom applications.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ output depends on the specified external amplifier configuration.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 output depends on the specified external amplifier configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D2 supports the optional RMS remote monitoring system through Compass software.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ provides monitoring through its external amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 provides monitoring through its external d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat coverage pattern does the UPQ-D2 provide?\u003c\/strong\u003e\u003cbr\u003eIt uses a focused 50-degree horizontal by 50-degree vertical symmetrical Constant-Q horn at the -6 dB points, widening to 60 by 60 degrees at the -10 dB points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the UPQ-D2 differ from the UPQ-D1 and UPQ-D3?\u003c\/strong\u003e\u003cbr\u003eThe UPQ-D2 offers a focused 50 by 50 degree pattern, the UPQ-D1 a wide 80 by 50 degree pattern, and the UPQ-D3 a wide symmetrical 80 by 80 degree pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the UPQ-D2 self-powered?\u003c\/strong\u003e\u003cbr\u003eYes. It includes a two-channel Class D amplifier rated at 2250 W peak with onboard processing, so no external amplifier is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a subwoofer?\u003c\/strong\u003e\u003cbr\u003eYes. A companion subwoofer such as the Meyer Sound 750-LFC can extend low-frequency response for full-range systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924677812460,"sku":"09.292.001.02","price":12030.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-d3-wp-3-15-2-way-active-speaker-with-weather-protection-creation-networks-19658.webp?v=1757941415"},{"product_id":"meyer-sound-upq-d2-15-2-way-active-speaker-3-pin-input-with-weather-protection","title":"Meyer Sound UPQ-D2-WP-3 15\" 2-Way Active Speaker, 3-Pin Input (with Weather Protection) - 09.292.001.08","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UPQ-D2-WP is the weather-protected version of the UPQ-D2, a full-size self-powered point source loudspeaker with a focused symmetrical coverage pattern for precise, long-throw reinforcement in installed systems exposed to the elements. Its 50-degree horizontal by 50-degree vertical Constant-Q horn concentrates output for deep audience areas and arrayable clusters, making it suitable for auditoriums, houses of worship, and multi-purpose performance spaces, including covered outdoor areas. A 15-inch neodymium cone driver and 4-inch diaphragm compression driver are powered by an onboard two-channel Class D amplifier rated at 2250 W peak. This 3-pin input version uses a standard XLR connection for straightforward integration into analog signal chains.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-d3-wp-3-15-2-way-active-speaker-with-weather-protection-creation-networks-19658.webp?v=1757941415\" alt=\"Meyer Sound UPQ-D2-WP weather-protected 15-inch active point source loudspeaker\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPQ-D2-WP shares the acoustic platform of the UPQ-D2 with Meyer Sound weather protection treatment for greater resistance to environmental exposure. Its Constant-Q horn delivers a focused 50-degree horizontal by 50-degree vertical pattern at the -6 dB points, widening to 60 by 60 degrees at the -10 dB points, supporting precise coverage and arrayability in clusters. The vented trapezoidal enclosure is built from premium multi-ply birch with a textured black finish, an integral 38 mm pole-mount receptacle, and 6061-T6 aluminum end plates with M10 threaded rigging points. For the standard non-weather-protected version, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d2-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D2\u003c\/a\u003e; for wider horizontal coverage the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d1-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D1\u003c\/a\u003e, and for a wide symmetrical pattern the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d3-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D3\u003c\/a\u003e. The full range is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. Low-frequency extension can be added with a companion subwoofer such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather Protection\u003c\/strong\u003e — Meyer Sound weather protection treatment increases resistance to environmental exposure in covered outdoor installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocused Symmetrical Pattern\u003c\/strong\u003e — The 50-degree by 50-degree Constant-Q horn affords precise coverage and arrayability in horizontal or vertical clusters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant-Q Horn\u003c\/strong\u003e — Consistent beamwidth in both planes provides uniform response and predictable coverage throughout the pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Output\u003c\/strong\u003e — A linear peak SPL of 138 dB supports long-throw and high-headroom applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch Neodymium LF Driver\u003c\/strong\u003e — A high-power 15-inch neodymium cone driver delivers strong low-frequency output with reduced weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Amplification\u003c\/strong\u003e — An onboard two-channel Class D amplifier provides 2250 W peak output with low distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin XLR Input\u003c\/strong\u003e — A standard XLR 3-pin female input with male loop output simplifies analog signal distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAuditorium and theatrical sound reinforcement\u003c\/li\u003e\n\u003cli\u003eHouse of worship main and longer-throw systems\u003c\/li\u003e\n\u003cli\u003eMulti-purpose performance rooms\u003c\/li\u003e\n\u003cli\u003eGovernment and civic assembly spaces\u003c\/li\u003e\n\u003cli\u003eAll-hands and large meeting venues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz - 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e58 Hz - 18 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e138 dB (M-noise, 19 dB crest factor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage (-6 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e50° horizontal x 50° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage (-10 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e60° horizontal x 60° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch neodymium cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 4-inch diaphragm compression driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel Class D, 2250 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output; differential, 10 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePowerCON 20 input with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eVoltage Selection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAutomatic, 90 - 265 V AC, 50 - 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e483 mm W x 715 mm H x 462 mm D (19.00 x 28.15 x 18.18 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 kg (95 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish with Meyer Sound weather protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound UPQ-D2-WP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics X15 HiQ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b E12\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFormat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D2-WP is a weather-protected self-powered two-way point source with a 15-inch low-frequency driver and onboard amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ is a passive 15-inch coaxial point source requiring external L-Acoustics amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 is a passive 12-inch two-way point source driven by an external d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification and processing are built into the UPQ-D2-WP enclosure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ relies on external amplifier controllers for power and processing.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 relies on external d\u0026amp;b amplifiers for power and processing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D2-WP includes Meyer Sound weather protection treatment for covered outdoor use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ requires a separate weatherized variant for outdoor exposure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 requires a separate weatherized variant for outdoor exposure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D2-WP provides a focused 50-degree by 50-degree symmetrical Constant-Q pattern for precise, long-throw coverage.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ offers a rotatable 40-degree by 60-degree pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 offers a rotatable 75-degree by 40-degree pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D2-WP supports the optional RMS remote monitoring system through Compass software.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ provides monitoring through its external amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 provides monitoring through its external d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the WP designation mean?\u003c\/strong\u003e\u003cbr\u003eWP indicates Meyer Sound weather protection treatment, increasing the loudspeaker's resistance to environmental exposure in covered outdoor installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat coverage pattern does the UPQ-D2-WP provide?\u003c\/strong\u003e\u003cbr\u003eIt uses a focused 50-degree horizontal by 50-degree vertical symmetrical Constant-Q horn at the -6 dB points, widening to 60 by 60 degrees at the -10 dB points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the UPQ-D2-WP self-powered?\u003c\/strong\u003e\u003cbr\u003eYes. It includes a two-channel Class D amplifier rated at 2250 W peak with onboard processing, so no external amplifier is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a subwoofer?\u003c\/strong\u003e\u003cbr\u003eYes. A companion subwoofer such as the Meyer Sound 750-LFC can extend low-frequency response for full-range systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924678402284,"sku":"09.292.001.08","price":13220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-d3-wp-3-15-2-way-active-speaker-with-weather-protection-creation-networks-19658.webp?v=1757941415"},{"product_id":"meyer-sound-upq-d3-15-2-way-active-speaker-3-pin-input","title":"Meyer Sound UPQ-D3-3 15\" 2-Way Active Speaker - 09.293.001.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UPQ-D3 is a full-size self-powered point source loudspeaker with a wide symmetrical coverage pattern for covering broad listening areas with a single enclosure. Its 80-degree horizontal by 80-degree vertical Constant-Q horn suits front-of-house and fill duty in houses of worship, auditoriums, and multi-purpose performance spaces where wide, even coverage is required. A 15-inch neodymium cone driver and 4-inch diaphragm compression driver are powered by an onboard two-channel Class D amplifier rated at 2250 W peak. This 3-pin input version uses a standard XLR connection for straightforward integration into analog signal chains.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-d3-wp-3-15-2-way-active-speaker-with-weather-protection-creation-networks-19658.webp?v=1757941415\" alt=\"Meyer Sound UPQ-D3 15-inch 2-way active point source loudspeaker\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPQ-D3 shares the UPQ-D platform but provides a wide symmetrical pattern that covers broad listening areas from a single loudspeaker. Its Constant-Q horn delivers 80-degree horizontal by 80-degree vertical coverage at the -6 dB points, widening to 100 by 100 degrees at the -10 dB points with uniform attenuation outside the pattern. The vented trapezoidal enclosure is built from premium multi-ply birch with a textured black finish, an integral 38 mm pole-mount receptacle, and 6061-T6 aluminum end plates with M10 threaded rigging points. For a wide horizontal but narrower vertical pattern, consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d1-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D1\u003c\/a\u003e, or for a focused symmetrical pattern the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d2-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D2\u003c\/a\u003e; the full range is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. Low-frequency extension can be added with a companion subwoofer such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC\u003c\/a\u003e. QuickFly rigging is supported through the MPA-UPQ array plate and MYA-UPQ mounting yoke.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Symmetrical Pattern\u003c\/strong\u003e — The 80-degree by 80-degree Constant-Q horn covers broad listening areas with a single loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant-Q Horn\u003c\/strong\u003e — Consistent beamwidth in both planes provides uniform response and predictable coverage throughout the pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch Neodymium LF Driver\u003c\/strong\u003e — A high-power 15-inch neodymium cone driver delivers strong low-frequency output with reduced weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Amplification\u003c\/strong\u003e — An onboard two-channel Class D amplifier provides 2250 W peak output with low distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered\u003c\/strong\u003e — Integrated amplification and processing make the loudspeaker a complete system in a single enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin XLR Input\u003c\/strong\u003e — A standard XLR 3-pin female input with male loop output simplifies analog signal distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Rigging\u003c\/strong\u003e — An integral pole-mount receptacle and M10 aluminum end plates support QuickFly rigging accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship main and fill systems\u003c\/li\u003e\n\u003cli\u003eAuditorium and theatrical sound reinforcement\u003c\/li\u003e\n\u003cli\u003eMulti-purpose performance rooms\u003c\/li\u003e\n\u003cli\u003eGovernment and civic assembly spaces\u003c\/li\u003e\n\u003cli\u003eAll-hands and large meeting venues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz - 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e58 Hz - 18 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e135 dB (M-noise, crest factor \u0026gt;17 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage (-6 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80° horizontal x 80° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage (-10 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° horizontal x 100° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch neodymium cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 4-inch diaphragm compression driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel Class D, 2250 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output; differential, 10 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePowerCON 20 input with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eVoltage Selection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAutomatic, 90 - 265 V AC, 50 - 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e483 mm W x 715 mm H x 462 mm D (19.00 x 28.15 x 18.18 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 kg (95 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish; M10 aluminum end plates, 38 mm pole mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound UPQ-D3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics X15 HiQ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b E12\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFormat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D3 is a self-powered two-way point source with a 15-inch low-frequency driver and onboard amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ is a passive 15-inch coaxial point source requiring external L-Acoustics amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 is a passive 12-inch two-way point source driven by an external d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification and processing are built into the UPQ-D3 enclosure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ relies on external amplifier controllers for power and processing.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 relies on external d\u0026amp;b amplifiers for power and processing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D3 provides a wide 80-degree by 80-degree symmetrical Constant-Q pattern for broad single-box coverage.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ offers a rotatable 40-degree by 60-degree pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 offers a rotatable 75-degree by 40-degree pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D3 uses a 15-inch neodymium cone driver for substantial low-frequency output.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ uses a 15-inch coaxial driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 uses a 12-inch low-frequency driver.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D3 supports the optional RMS remote monitoring system through Compass software.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ provides monitoring through its external amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 provides monitoring through its external d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat coverage pattern does the UPQ-D3 provide?\u003c\/strong\u003e\u003cbr\u003eIt uses a wide 80-degree horizontal by 80-degree vertical symmetrical Constant-Q horn at the -6 dB points, widening to 100 by 100 degrees at the -10 dB points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the UPQ-D3 differ from the UPQ-D1 and UPQ-D2?\u003c\/strong\u003e\u003cbr\u003eThe UPQ-D3 offers a wide symmetrical 80 by 80 degree pattern, the UPQ-D1 a wide 80 by 50 degree pattern, and the UPQ-D2 a focused 50 by 50 degree pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the UPQ-D3 self-powered?\u003c\/strong\u003e\u003cbr\u003eYes. It includes a two-channel Class D amplifier rated at 2250 W peak with onboard processing, so no external amplifier is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a subwoofer?\u003c\/strong\u003e\u003cbr\u003eYes. A companion subwoofer such as the Meyer Sound 750-LFC can extend low-frequency response for full-range systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924680335596,"sku":"09.293.001.02","price":12030.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-d3-wp-3-15-2-way-active-speaker-with-weather-protection-creation-networks-19658.webp?v=1757941415"},{"product_id":"meyer-sound-upq-d3-15-2-way-active-speaker-3-pin-input-with-weather-protection","title":"Meyer Sound UPQ-D3-WP-3 15\" 2-Way Active Speaker (with Weather Protection) - 09.293.001.08","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UPQ-D3-WP is the weather-protected version of the UPQ-D3, a full-size self-powered point source loudspeaker with a wide symmetrical coverage pattern for installed systems exposed to the elements. Its 80-degree horizontal by 80-degree vertical Constant-Q horn covers broad listening areas from a single enclosure, suiting houses of worship, auditoriums, and multi-purpose performance spaces, including covered outdoor areas. A 15-inch neodymium cone driver and 4-inch diaphragm compression driver are powered by an onboard two-channel Class D amplifier rated at 2250 W peak. This 3-pin input version uses a standard XLR connection for straightforward integration into analog signal chains.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-d3-wp-3-15-2-way-active-speaker-with-weather-protection-creation-networks-19658.webp?v=1757941415\" alt=\"Meyer Sound UPQ-D3-WP weather-protected 15-inch active point source loudspeaker\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPQ-D3-WP shares the acoustic platform of the UPQ-D3 with Meyer Sound weather protection treatment for greater resistance to environmental exposure. Its Constant-Q horn delivers a wide 80-degree horizontal by 80-degree vertical pattern at the -6 dB points, widening to 100 by 100 degrees at the -10 dB points, covering broad listening areas from a single loudspeaker. The vented trapezoidal enclosure is built from premium multi-ply birch with a textured black finish, an integral 38 mm pole-mount receptacle, and 6061-T6 aluminum end plates with M10 threaded rigging points. For the standard non-weather-protected version, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d3-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D3\u003c\/a\u003e; for a wide-by-narrow pattern the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d1-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D1\u003c\/a\u003e, and for a focused symmetrical pattern the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d2-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D2\u003c\/a\u003e. The full range is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. Low-frequency extension can be added with a companion subwoofer such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather Protection\u003c\/strong\u003e — Meyer Sound weather protection treatment increases resistance to environmental exposure in covered outdoor installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Symmetrical Pattern\u003c\/strong\u003e — The 80-degree by 80-degree Constant-Q horn covers broad listening areas with a single loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant-Q Horn\u003c\/strong\u003e — Consistent beamwidth in both planes provides uniform response and predictable coverage throughout the pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-inch Neodymium LF Driver\u003c\/strong\u003e — A high-power 15-inch neodymium cone driver delivers strong low-frequency output with reduced weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Amplification\u003c\/strong\u003e — An onboard two-channel Class D amplifier provides 2250 W peak output with low distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin XLR Input\u003c\/strong\u003e — A standard XLR 3-pin female input with male loop output simplifies analog signal distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Rigging\u003c\/strong\u003e — An integral pole-mount receptacle and M10 aluminum end plates support QuickFly rigging accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouse of worship main and fill systems\u003c\/li\u003e\n\u003cli\u003eAuditorium and theatrical sound reinforcement\u003c\/li\u003e\n\u003cli\u003eMulti-purpose performance rooms\u003c\/li\u003e\n\u003cli\u003eGovernment and civic assembly spaces\u003c\/li\u003e\n\u003cli\u003eAll-hands and large meeting venues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e55 Hz - 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e58 Hz - 18 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e135 dB (M-noise, crest factor \u0026gt;17 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage (-6 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80° horizontal x 80° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage (-10 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° horizontal x 100° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 15-inch neodymium cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 4-inch diaphragm compression driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo-channel Class D, 2250 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output; differential, 10 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePowerCON 20 input with loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eVoltage Selection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAutomatic, 90 - 265 V AC, 50 - 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e483 mm W x 715 mm H x 462 mm D (19.00 x 28.15 x 18.18 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e43 kg (95 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish with Meyer Sound weather protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound UPQ-D3-WP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics X15 HiQ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b E12\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFormat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D3-WP is a weather-protected self-powered two-way point source with a 15-inch low-frequency driver and onboard amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ is a passive 15-inch coaxial point source requiring external L-Acoustics amplification.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 is a passive 12-inch two-way point source driven by an external d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification and processing are built into the UPQ-D3-WP enclosure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ relies on external amplifier controllers for power and processing.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 relies on external d\u0026amp;b amplifiers for power and processing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeather Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D3-WP includes Meyer Sound weather protection treatment for covered outdoor use.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ requires a separate weatherized variant for outdoor exposure.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 requires a separate weatherized variant for outdoor exposure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D3-WP provides a wide 80-degree by 80-degree symmetrical Constant-Q pattern for broad single-box coverage.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ offers a rotatable 40-degree by 60-degree pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 offers a rotatable 75-degree by 40-degree pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPQ-D3-WP supports the optional RMS remote monitoring system through Compass software.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X15 HiQ provides monitoring through its external amplified controllers.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E12 provides monitoring through its external d\u0026amp;b amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the WP designation mean?\u003c\/strong\u003e\u003cbr\u003eWP indicates Meyer Sound weather protection treatment, increasing the loudspeaker's resistance to environmental exposure in covered outdoor installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat coverage pattern does the UPQ-D3-WP provide?\u003c\/strong\u003e\u003cbr\u003eIt uses a wide 80-degree horizontal by 80-degree vertical symmetrical Constant-Q horn at the -6 dB points, widening to 100 by 100 degrees at the -10 dB points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the UPQ-D3-WP self-powered?\u003c\/strong\u003e\u003cbr\u003eYes. It includes a two-channel Class D amplifier rated at 2250 W peak with onboard processing, so no external amplifier is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a subwoofer?\u003c\/strong\u003e\u003cbr\u003eYes. A companion subwoofer such as the Meyer Sound 750-LFC can extend low-frequency response for full-range systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924684234988,"sku":"09.293.001.08","price":13220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-d3-wp-3-15-2-way-active-speaker-with-weather-protection-creation-networks-19658.webp?v=1757941415"},{"product_id":"meyer-sound-upq-1p-eye-bolt-kit","title":"Meyer Sound UPQ-1P Eye Up Bolt Kit - 40.185.013.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UPQ-1P Eye Up Bolt Kit is a rigging accessory for suspending UPQ-series loudspeakers from their threaded M10 end-plate attachment points. It provides eyebolt hardware for basic overhead rigging in installed and portable systems. The kit is intended for use with the UPQ point source loudspeakers and their associated rigging hardware.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-1p-eye-up-bolt-kit-creation-networks-84685.jpg?v=1757941420\" alt=\"Meyer Sound UPQ-1P Eye Up Bolt Kit rigging accessory\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPQ-1P Eye Up Bolt Kit supplies eyebolt hardware that threads into the M10 metric attachment points on the aluminum end plates of UPQ-series loudspeakers, allowing the cabinet to be suspended for overhead deployment. It is intended to pair with UPQ loudspeakers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d1-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D1\u003c\/a\u003e, \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d2-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D2\u003c\/a\u003e, and \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d3-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D3\u003c\/a\u003e. Additional UPQ rigging hardware is available through the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPQ Compatibility\u003c\/strong\u003e — Designed for use with UPQ-series point source loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEyebolt Rigging\u003c\/strong\u003e — Provides eyebolt hardware for basic overhead suspension of the loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM10 Interface\u003c\/strong\u003e — Threads into the M10 metric attachment points on the loudspeaker's aluminum end plates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEyebolt rigging kit for UPQ-series loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLoudspeaker Interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM10 threaded end-plate attachment points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUPQ-1P Eye Up Bolt Kit (40.185.013.01)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45929049030892,"sku":"40.185.013.01","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upq-1p-eye-up-bolt-kit-creation-networks-84685.jpg?v=1757941420"},{"product_id":"meyer-sound-mya-upq-cradle-style-yoke-kit","title":"Meyer Sound MYA-UPQ Cradle Style Yoke Kit - 40.185.052.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MYA-UPQ is a cradle-style mounting yoke kit for suspending a single UPQ-series loudspeaker in fixed installations. It provides a wide range of horizontal and vertical adjustment so the loudspeaker can be aimed precisely for the application. The kit is part of the Meyer Sound QuickFly rigging system for the UPQ point source loudspeakers.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mya-upq-cradle-style-yoke-kit-creation-networks-16982.jpg?v=1757941421\" alt=\"Meyer Sound MYA-UPQ cradle-style yoke kit for UPQ loudspeakers\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MYA-UPQ is a cradle-style mounting yoke that suspends a single UPQ-D loudspeaker and supports a wide range of horizontal and vertical adjustment for accurate aiming in installed systems. It mounts to the loudspeaker's end-plate rigging points and is intended to pair with UPQ loudspeakers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d1-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D1\u003c\/a\u003e, \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d2-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D2\u003c\/a\u003e, and \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d3-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D3\u003c\/a\u003e. For arraying multiple UPQ loudspeakers, the MPA-UPQ pick-up and array plate is also available through the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPQ Compatibility\u003c\/strong\u003e — Designed for mounting a single UPQ-series point source loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCradle-Style Yoke\u003c\/strong\u003e — A U-shaped cradle suspends the loudspeaker for wall, ceiling, or structural installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Adjustment Range\u003c\/strong\u003e — Supports a wide range of horizontal and vertical adjustment for precise aiming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuickFly Rigging\u003c\/strong\u003e — Part of the Meyer Sound QuickFly rigging system for UPQ loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCradle-style mounting yoke for a single UPQ-D loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAdjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWide range of horizontal and vertical adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMYA-UPQ (40.185.052.01)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45929101918444,"sku":"40.185.052.01","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mya-upq-cradle-style-yoke-kit-creation-networks-16982.jpg?v=1757941421"},{"product_id":"meyer-sound-mpa-upq-pickup-array-plate-kit","title":"Meyer Sound MPA-UPQ Pickup Array Plate Kit - 40.185.054.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MPA-UPQ is a pick-up and array plate kit for suspending and arraying UPQ-series loudspeakers in fixed installations. It allows one or multiple UPQ-D loudspeakers to be hung at a vertical angle and arrayed in horizontal or vertical clusters. The kit is part of the Meyer Sound QuickFly rigging system for the UPQ point source loudspeakers.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mpa-upq-pickup-array-plate-kit-creation-networks-13482.jpg?v=1757941422\" alt=\"Meyer Sound MPA-UPQ pick-up and array plate kit for UPQ loudspeakers\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MPA-UPQ pick-up and array plate kit includes two plates that facilitate installation of two UPQ-D loudspeakers in horizontal and vertical clusters at variable angles between 34 and 50 degrees in 4-degree increments. The kit includes eight M10 bolts and eight M10 knobs, and the pick-up holes accept up to a 0.5-inch shackle. It is intended to pair with UPQ loudspeakers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d1-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D1\u003c\/a\u003e, \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d2-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D2\u003c\/a\u003e, and \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upq-d3-15-2-way-active-speaker-3-pin-input\"\u003eUPQ-D3\u003c\/a\u003e. For mounting a single UPQ loudspeaker, the MYA-UPQ cradle-style yoke is also available through the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPQ Compatibility\u003c\/strong\u003e — Designed for suspending and arraying UPQ-series point source loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCluster Arraying\u003c\/strong\u003e — Supports horizontal and vertical clusters at variable angles between 34 and 50 degrees in 4-degree increments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Hardware\u003c\/strong\u003e — Includes two plates, eight M10 bolts, and eight M10 knobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShackle Compatible\u003c\/strong\u003e — Pick-up holes accept up to a 0.5-inch shackle for suspension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePick-up and array plate kit for UPQ-D loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eArray Angles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e34 to 50 degrees in 4-degree increments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eIncluded Hardware\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo plates, eight M10 bolts, eight M10 knobs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eShackle Capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePick-up holes accept up to a 0.5-inch shackle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMPA-UPQ (40.185.054.01)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45929105522924,"sku":"40.185.054.01","price":680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mpa-upq-pickup-array-plate-kit-creation-networks-13482.jpg?v=1757941422"},{"product_id":"meyer-sound-upm-1p-2x5-active-speaker-3-pin-input","title":"Meyer Sound UPM-1P 2x5\" Active Speaker, 3-Pin Input - 09.084.001.18","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UPM-1P is a self-powered, ultracompact wide-coverage loudspeaker engineered for professional sound reinforcement where a small, inconspicuous enclosure must still deliver high sound pressure levels with very low distortion. Driven by a two-channel amplifier with active crossover and phase-correction circuitry, it provides true point-source performance and symmetrical 100° by 100° coverage. The cabinet accepts balanced audio through a 3-pin XLR input with a looping male output for straightforward signal distribution. It serves equally well as a compact main PA, a frontfill, or a delay loudspeaker in larger indoor and outdoor systems.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input-creation-networks-62797.jpg?v=1757946000\" alt=\"Meyer Sound UPM-1P 2x5 inch active loudspeaker with 3-pin XLR input\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPM-1P combines two 5-inch low-frequency cone drivers with a 1-inch metal dome tweeter mounted on a symmetrical, constant-directivity high-frequency horn. The two woofers operate in parallel below 320 Hz to combine their acoustic output, while one driver rolls off above that frequency to prevent comb filtering and maintain consistent midrange response. Onboard processing handles equalization, signal division, phase alignment, and driver protection, and a laser-trimmed differential input stage provides strong common-mode rejection for long shielded twisted-pair cable runs. The switchable 115\/230 V AC power supply includes EMI filtering, soft turn-on, and surge suppression, with dual PowerCON connectors for AC looping between cabinets. For an externally powered IntelligentDC alternative, consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upm-1xp-2x5-active-speaker-3-pin-input-phx-5\"\u003eMeyer Sound UPM-1XP\u003c\/a\u003e, and pair the UPM-1P with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC low-frequency control element\u003c\/a\u003e to extend the system to full range. Browse the complete \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltraCompact Format\u003c\/strong\u003e — The trapezoidal birch enclosure measures just 6.93 inches wide by 18 inches tall, fitting discreetly into installations where a larger loudspeaker would be visually intrusive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Self-Powered Design\u003c\/strong\u003e — Two 5-inch cone drivers and a 1-inch metal dome tweeter are driven by an integrated two-channel amplifier with 650 W peak output capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint-Source Crossover\u003c\/strong\u003e — A unique crossover topology rolls one woofer off above 320 Hz to eliminate comb filtering and preserve a consistent midrange response across the listening area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Symmetrical Coverage\u003c\/strong\u003e — Matched 100° horizontal and 100° vertical coverage allows the loudspeaker to serve broad listening areas with uniform directional control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — Total harmonic, intermodulation, and transient intermodulation distortion remain below 0.02 percent for clean reproduction of speech and music.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced XLR Input with Loop\u003c\/strong\u003e — A 3-pin female XLR input with male loop output and 10 kΩ differential impedance supports long cable runs and signal distribution between units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerCON AC Looping\u003c\/strong\u003e — Two PowerCON connectors and a switchable 115\/230 V supply with surge suppression simplify AC distribution across multiple cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting\u003c\/strong\u003e — Three 3\/8-inch-16 or M10 recessed nut plates accept optional U-bracket, yoke, and pole-mount hardware for varied installation orientations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides clear vocal reinforcement and frontfill coverage in sanctuaries where the loudspeaker must remain visually unobtrusive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Serves as a frontfill or under-balcony delay loudspeaker to maintain intelligibility in seating areas not covered by the main system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Delivers high SPL from a compact enclosure for events that combine speech and program audio in a single flexible space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial Meeting Space\u003c\/strong\u003e — Reinforces presentations and voice content with uniform coverage and low distortion in a discreet package.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e75 Hz – 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80 Hz – 16 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e415 Hz – 16 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;14 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° horizontal x 100° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 5-inch cone drivers; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 1-inch metal dome tweeter; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eComplementary MOSFET output stages (class AB\/bridged)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e650 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eXLR 3-pin female input with male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePowerCON input with loop output; switchable 115\/230 V AC (100 V version available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW: 6.93 in (176 mm) x H: 18.00 in (457 mm) x D: 7.60 in (193 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e22 lb (9.98 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThree 3\/8-inch-16 or metric M10 nut plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound UPM-1P\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics X8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b E5\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UPM-1P is self-powered with an integrated two-channel amplifier built into the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe X8 is a passive coaxial loudspeaker that requires an external L-Acoustics amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E5 is a passive design driven by an external d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow-Frequency Section\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses two 5-inch cone drivers operating in parallel below 320 Hz.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 8-inch coaxial low-frequency transducer.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 5-inch low-frequency driver.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage Pattern\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt provides symmetrical 100° by 100° coverage.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt offers a 100° by 100° coaxial pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt offers a nominal 100° conical dispersion.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOnboard Processing\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEqualization, phase correction, and driver protection are built into the loudspeaker.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eProcessing is handled externally in the amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eProcessing resides in the external d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eInput Connector\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt accepts a 3-pin XLR balanced input with a male loop output.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt connects via speaker-level cabling from the controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt connects via speaker-level cabling from the amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSystem Approach\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eA single cabinet with line-level input and AC power forms a complete channel.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eA complete channel requires the loudspeaker plus a dedicated amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eA complete channel requires the loudspeaker plus a dedicated amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the UPM-1P self-powered?\u003c\/strong\u003e\u003cbr\u003eYes. The UPM-1P includes a two-channel amplifier, active crossover, and driver protection inside the cabinet, requiring only a line-level audio signal and AC power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat input connector does it use?\u003c\/strong\u003e\u003cbr\u003eIt accepts balanced audio through a 3-pin female XLR input with a male loop output for distributing signal to additional cabinets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eStandard units are intended for indoor use, but Meyer Sound offers an optional weather-protection treatment of the cabinet for fixed outdoor installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow can it be extended to full range?\u003c\/strong\u003e\u003cbr\u003ePairing the UPM-1P with a Meyer Sound subwoofer such as the 750-LFC adds low-frequency extension for a full-range system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942162915564,"sku":"09.084.001.18","price":4200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input-creation-networks-62797.jpg?v=1757946000"},{"product_id":"meyer-sound-mya-upm-mounting-yoke-assembly","title":"Meyer Sound MYA-UPM Mounting Yoke Assembly - 40.084.038.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MYA-UPM is a cradle-style mounting yoke designed to suspend a single UPM-series loudspeaker. It supports a wide range of horizontal and vertical adjustment, allowing precise aiming of the loudspeaker after installation. The yoke attaches to the top and bottom recessed nut plates of the cabinet and ships with both 3\/8-inch-16 and M10 hardware. It is the standard suspension accessory for the UPM-1P and UPM-1XP loudspeakers.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mya-upm-mounting-yoke-assembly-creation-networks-33944.jpg?v=1757941472\" alt=\"Meyer Sound MYA-UPM cradle-style mounting yoke assembly\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MYA-UPM cradles the loudspeaker between two arms that fasten to the cabinet's top and bottom nut plates, providing secure single-point suspension with adjustable tilt and pan. Its wide adjustment range makes it suitable for fixed installations where the loudspeaker must be aimed precisely toward a defined listening area. The supplied 3\/8-inch-16 and M10 hardware ensures compatibility with both imperial and metric rigging points on the UPM cabinet. The yoke can also be mounted onto a 35 mm pole using the optional MSA-STAND Adapter Cup for portable applications. This accessory is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input\"\u003eMeyer Sound UPM-1P\u003c\/a\u003e and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upm-1xp-2x5-active-speaker-3-pin-input-phx-5\"\u003eMeyer Sound UPM-1XP\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCradle-Style Yoke\u003c\/strong\u003e — Suspends a single UPM-series loudspeaker between two arms for secure single-point mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Adjustment Range\u003c\/strong\u003e — Supports a broad range of horizontal and vertical adjustment for precise aiming after installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNut Plate Attachment\u003c\/strong\u003e — Fastens to the top and bottom recessed nut plates of the UPM cabinet for a stable connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Hardware Included\u003c\/strong\u003e — Ships with both 3\/8-inch-16 and M10 hardware for compatibility with imperial and metric rigging points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole-Mount Compatible\u003c\/strong\u003e — Can be mounted on a 35 mm pole using the optional MSA-STAND Adapter Cup for portable use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCradle-style mounting yoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUPM-1P and UPM-1XP loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAttaches to top and bottom nut plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAdjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWide horizontal and vertical adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHardware Included\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3\/8-inch-16 and M10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942170190060,"sku":"40.084.038.01","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mya-upm-mounting-yoke-assembly-creation-networks-33944.jpg?v=1757941472"},{"product_id":"meyer-sound-mub-upm-vr-m10-u-bracket-for-vertical-r","title":"Meyer Sound MUB-UPM VR M10 U-Bracket for Vertical R - 40.084.055.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MUB-UPM is a U-shaped mounting bracket that allows a UPM-series loudspeaker to be mounted to a wall, ceiling, or floor. This M10 version is configured for vertical mounting of the loudspeaker, providing a rigid, fixed-position attachment for permanent installations. The bracket cradles the cabinet between two arms and secures to its threaded nut plates. It is intended for use with the UPM-1P and UPM-1XP loudspeakers.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mub-upm-hd-bracket-10mm-nutplate-creation-networks-88106.jpg?v=1757941474\" alt=\"Meyer Sound MUB-UPM U-bracket for UPM-series loudspeakers\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MUB-UPM U-bracket supports mounting the loudspeaker in either vertical or horizontal orientations on a wall, as well as to a ceiling or onto the floor, making it a versatile choice for fixed installations. This configuration uses M10 hardware and is set up for vertical loudspeaker orientation. The U-shaped design holds the cabinet securely between two arms that fasten to the loudspeaker's recessed nut plates, allowing the unit to be tilted to the desired angle and locked in place. It provides a clean, low-profile mounting solution where a suspended yoke is not appropriate. This accessory is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input\"\u003eMeyer Sound UPM-1P\u003c\/a\u003e and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upm-1xp-2x5-active-speaker-3-pin-input-phx-5\"\u003eMeyer Sound UPM-1XP\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eU-Bracket Design\u003c\/strong\u003e — Cradles the UPM cabinet between two arms for a rigid, fixed-position mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Surface Mounting\u003c\/strong\u003e — Allows mounting to a wall, ceiling, or floor to suit a variety of installation requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Orientation\u003c\/strong\u003e — This configuration is set up for vertical mounting of the loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM10 Hardware\u003c\/strong\u003e — Uses M10 threaded hardware to secure to the loudspeaker's recessed nut plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tilt\u003c\/strong\u003e — The cabinet can be angled and locked in position for precise aiming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eU-shaped mounting bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUPM-1P and UPM-1XP loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMounting Surfaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWall, ceiling, or floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOrientation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eVertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHardware\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942172680428,"sku":"40.084.055.02","price":490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mub-upm-hd-bracket-10mm-nutplate-creation-networks-88106.jpg?v=1757941474"},{"product_id":"meyer-sound-mub-upm-hd-bracket-10mm-nutplate","title":"Meyer Sound MUB-UPM HD Bracket 10mm Nutplate - 40.084.095.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MUB-UPM HD Bracket is a heavy-duty U-shaped mounting bracket for UPM-series loudspeakers, configured with a 10 mm nutplate interface. It allows a UPM-1P or UPM-1XP loudspeaker to be mounted to a wall in vertical or horizontal orientations, as well as to a ceiling or floor. The U-bracket cradles the cabinet between two arms and secures to its threaded mounting points. It provides a rigid, fixed-position mounting solution for permanent installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mub-upm-hd-bracket-10mm-nutplate-creation-networks-88106.jpg?v=1757941474\" alt=\"Meyer Sound MUB-UPM HD U-bracket with 10mm nutplate\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MUB-UPM HD bracket holds the loudspeaker securely between two arms that attach to the cabinet's recessed nut plates, allowing the unit to be angled and locked into position. Its heavy-duty construction and 10 mm nutplate interface make it well suited to permanent installations where a rigid, fixed mount is required rather than a suspended yoke. The bracket supports wall mounting in both vertical and horizontal orientations as well as ceiling and floor mounting, giving installers flexibility across a range of architectural conditions. This accessory is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input\"\u003eMeyer Sound UPM-1P\u003c\/a\u003e and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upm-1xp-2x5-active-speaker-3-pin-input-phx-5\"\u003eMeyer Sound UPM-1XP\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty U-Bracket\u003c\/strong\u003e — Cradles the UPM cabinet between two arms for a rigid, fixed-position mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 mm Nutplate Interface\u003c\/strong\u003e — Configured with a 10 mm nutplate connection to the loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Surface Mounting\u003c\/strong\u003e — Supports wall mounting in vertical or horizontal orientations as well as ceiling and floor mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tilt\u003c\/strong\u003e — The cabinet can be angled and locked in position for precise aiming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPM Compatibility\u003c\/strong\u003e — Designed for the UPM-1P and UPM-1XP loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHeavy-duty U-shaped mounting bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUPM-1P and UPM-1XP loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e10 mm nutplate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMounting Surfaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWall (vertical or horizontal), ceiling, or floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942174089452,"sku":"40.084.095.02","price":280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mub-upm-hd-bracket-10mm-nutplate-creation-networks-88106.jpg?v=1757941474"},{"product_id":"meyer-sound-upm-1xp-2x5-active-speaker-3-pin-input-en-3","title":"Meyer Sound UPM-1XP 2x5\" Active Speaker, 3-Pin Input, EN-3 - 09.084.140.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UPM-1XP is a compact, externally powered wide-coverage loudspeaker that pairs IntelligentDC technology with the proven acoustic performance of the UPM platform. It delivers the same high sound pressure levels, low distortion, and symmetrical 100° by 100° coverage as the AC-powered UPM-1P, while drawing both 48 V DC power and balanced audio over a single cable. This configuration uses a sealed SwitchCraft EN3 5-pin male connector, well suited to permanent installations and demanding cable routing. It is an effective choice for frontfill, under-balcony delay, and vocal reinforcement where AC conduit is impractical.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input-creation-networks-62797.jpg?v=1757946000\" alt=\"Meyer Sound UPM-1XP 2x5 inch IntelligentDC loudspeaker with EN-3 connector\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPM-1XP combines two 5-inch low-frequency cone drivers with a 1-inch metal dome tweeter on a constant-directivity horn, all driven by a three-channel class D amplifier with active crossover, phase correction, and driver protection. The two woofers operate in parallel at low frequencies, with one rolling off above 320 Hz to suppress comb filtering and maintain consistent midrange response. Using IntelligentDC, the loudspeaker receives DC power and balanced audio from a single connector and tolerates voltage drops, allowing light-gauge cabling and runs up to 150 feet with only 1 dB of peak SPL loss using 18 AWG wire. It requires a Meyer Sound IntelligentDC external power supply such as the MPS-482HP or MPS-488HP. For the AC-powered equivalent, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input\"\u003eMeyer Sound UPM-1P\u003c\/a\u003e, and add the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC subwoofer\u003c\/a\u003e for full-range output. Explore the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Technology\u003c\/strong\u003e — A single cable carries both 48 V DC power and balanced audio, eliminating AC conduit while preserving the benefits of a self-powered system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed EN3 Connector\u003c\/strong\u003e — This configuration uses a sealed SwitchCraft EN3 5-pin male connector suited to permanent and demanding installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltraCompact Enclosure\u003c\/strong\u003e — The trapezoidal birch cabinet measures 6.85 inches wide by 18 inches tall and weighs 17 lb for discreet placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Channel Amplification\u003c\/strong\u003e — An integrated class D amplifier with 650 W peak output drives the two 5-inch woofers and 1-inch tweeter with onboard processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint-Source Crossover\u003c\/strong\u003e — One woofer rolls off above 320 Hz to eliminate comb filtering and preserve a uniform midrange across the coverage area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Symmetrical Coverage\u003c\/strong\u003e — Matched 100° horizontal and 100° vertical coverage maintains consistent directional control over broad listening areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Cable Runs\u003c\/strong\u003e — The amplifier stores DC power and tolerates voltage drops, supporting light-gauge cable and runs up to 150 feet with minimal SPL loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM distortion remain below 0.02 percent for clean reproduction of speech and program material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Delivers intelligible vocal reinforcement and frontfill from a discreet cabinet with simplified cabling in permanent installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Functions as a frontfill or under-balcony delay loudspeaker where running AC conduit to each position is impractical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment Space\u003c\/strong\u003e — Provides clear voice reinforcement in chambers and assembly areas with centralized power supplies and minimal visible cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial Meeting Space\u003c\/strong\u003e — Reinforces presentations with uniform coverage and low distortion while keeping power distribution centralized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e75 Hz – 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80 Hz – 16 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e300 Hz – 18 kHz ±60°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;14 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° horizontal x 100° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 5-inch cone drivers; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 1-inch metal dome tweeter; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-channel, class D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e650 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 5-pin male (two pins DC power, three pins balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC; Meyer Sound IntelligentDC external power supply required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW: 6.85 in (174 mm) x H: 18.00 in (457 mm) x D: 7.70 in (196 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e17 lb (7.7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThree 3\/8-inch-16 or metric M10 nut plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the UPM-1XP need a separate power supply?\u003c\/strong\u003e\u003cbr\u003eYes. The UPM-1XP requires a Meyer Sound IntelligentDC external power supply, such as the MPS-482HP or MPS-488HP, which delivers 48 V DC and balanced audio over a single cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the UPM-1XP and the UPM-1P?\u003c\/strong\u003e\u003cbr\u003eThe UPM-1XP uses IntelligentDC for externally supplied DC power and audio over one cable, while the UPM-1P is AC powered with a built-in supply and a 3-pin XLR input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connector does this version use?\u003c\/strong\u003e\u003cbr\u003eThis configuration uses a sealed SwitchCraft EN3 5-pin male connector carrying both 48 V DC power and balanced audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long can the cable runs be?\u003c\/strong\u003e\u003cbr\u003eComposite cables such as Belden 1502 can deliver power and audio up to 150 feet with about 1 dB of peak SPL loss using 18 AWG wire, with longer runs possible using heavier gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":46555547893996,"sku":"09.084.140.04","price":3750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input-creation-networks-62797.jpg?v=1757946000"},{"product_id":"meyer-sound-upm-1xp-2x5-active-speaker-3-pin-input-phx-5","title":"Meyer Sound UPM-1XP 2x5\" Active Speaker, 3-Pin Input, PHX-5 - 09.084.140.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UPM-1XP is a compact, externally powered wide-coverage loudspeaker that pairs IntelligentDC technology with the proven acoustic performance of the UPM platform. It delivers the same high sound pressure levels, low distortion, and symmetrical 100° by 100° coverage as the AC-powered UPM-1P, while drawing both 48 V DC power and balanced audio over a single cable. This configuration uses a Phoenix 5-pin male connector, a convenient terminal-style interface for installed systems. It is an effective choice for frontfill, under-balcony delay, and vocal reinforcement where AC conduit is impractical.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input-creation-networks-62797.jpg?v=1757946000\" alt=\"Meyer Sound UPM-1XP 2x5 inch IntelligentDC loudspeaker with PHX-5 Phoenix connector\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPM-1XP combines two 5-inch low-frequency cone drivers with a 1-inch metal dome tweeter on a constant-directivity horn, all driven by a three-channel class D amplifier with active crossover, phase correction, and driver protection. The two woofers operate in parallel at low frequencies, with one rolling off above 320 Hz to suppress comb filtering and maintain consistent midrange response. Using IntelligentDC, the loudspeaker receives DC power and balanced audio from a single connector and tolerates voltage drops, allowing light-gauge cabling and runs up to 150 feet with only 1 dB of peak SPL loss using 18 AWG wire. It requires a Meyer Sound IntelligentDC external power supply such as the MPS-482HP or MPS-488HP. For the AC-powered equivalent, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input\"\u003eMeyer Sound UPM-1P\u003c\/a\u003e, and add the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC subwoofer\u003c\/a\u003e for full-range output. Explore the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Technology\u003c\/strong\u003e — A single cable carries both 48 V DC power and balanced audio, eliminating AC conduit while preserving the benefits of a self-powered system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhoenix 5-Pin Connector\u003c\/strong\u003e — This configuration uses a Phoenix 5-pin male connector, a terminal-style interface convenient for installed system wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltraCompact Enclosure\u003c\/strong\u003e — The trapezoidal birch cabinet measures 6.85 inches wide by 18 inches tall and weighs 17 lb for discreet placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Channel Amplification\u003c\/strong\u003e — An integrated class D amplifier with 650 W peak output drives the two 5-inch woofers and 1-inch tweeter with onboard processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint-Source Crossover\u003c\/strong\u003e — One woofer rolls off above 320 Hz to eliminate comb filtering and preserve a uniform midrange across the coverage area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Symmetrical Coverage\u003c\/strong\u003e — Matched 100° horizontal and 100° vertical coverage maintains consistent directional control over broad listening areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Cable Runs\u003c\/strong\u003e — The amplifier stores DC power and tolerates voltage drops, supporting light-gauge cable and runs up to 150 feet with minimal SPL loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM distortion remain below 0.02 percent for clean reproduction of speech and program material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Delivers intelligible vocal reinforcement and frontfill from a discreet cabinet with simplified cabling in permanent installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Functions as a frontfill or under-balcony delay loudspeaker where running AC conduit to each position is impractical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment Space\u003c\/strong\u003e — Provides clear voice reinforcement in chambers and assembly areas with centralized power supplies and minimal visible cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial Meeting Space\u003c\/strong\u003e — Reinforces presentations with uniform coverage and low distortion while keeping power distribution centralized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e75 Hz – 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80 Hz – 16 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e300 Hz – 18 kHz ±60°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;14 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° horizontal x 100° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 5-inch cone drivers; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 1-inch metal dome tweeter; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-channel, class D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e650 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhoenix 5-pin male (two pins DC power, three pins balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC; Meyer Sound IntelligentDC external power supply required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW: 6.85 in (174 mm) x H: 18.00 in (457 mm) x D: 7.70 in (196 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e17 lb (7.7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThree 3\/8-inch-16 or metric M10 nut plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the UPM-1XP need a separate power supply?\u003c\/strong\u003e\u003cbr\u003eYes. The UPM-1XP requires a Meyer Sound IntelligentDC external power supply, such as the MPS-482HP or MPS-488HP, which delivers 48 V DC and balanced audio over a single cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the UPM-1XP and the UPM-1P?\u003c\/strong\u003e\u003cbr\u003eThe UPM-1XP uses IntelligentDC for externally supplied DC power and audio over one cable, while the UPM-1P is AC powered with a built-in supply and a 3-pin XLR input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connector does this version use?\u003c\/strong\u003e\u003cbr\u003eThis configuration uses a Phoenix 5-pin male connector carrying both 48 V DC power and balanced audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long can the cable runs be?\u003c\/strong\u003e\u003cbr\u003eComposite cables such as Belden 1502 can deliver power and audio up to 150 feet with about 1 dB of peak SPL loss using 18 AWG wire, with longer runs possible using heavier gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":46555549073644,"sku":"09.084.140.02","price":3750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input-creation-networks-62797.jpg?v=1757946000"},{"product_id":"meyer-sound-upm-1xp-2x5-active-speaker-3-pin-input-en-3-weather-resistant","title":"Meyer Sound UPM-1XP 2x5\" Active Speaker, 3-Pin Input, EN-3 (Weather-Resistant) - 09.084.140.06","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UPM-1XP Weather-Resistant is a compact, externally powered wide-coverage loudspeaker that combines IntelligentDC technology with weather protection for fixed outdoor and exposed installations. It delivers the same high sound pressure levels, low distortion, and symmetrical 100° by 100° coverage as the standard UPM-1XP, drawing both 48 V DC power and balanced audio over a single cable. This configuration uses a sealed SwitchCraft EN3 5-pin male connector well suited to permanent installs and harsh cabling environments. It is an effective choice for frontfill, under-balcony delay, and vocal reinforcement in venues where the loudspeaker is exposed to the elements.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input-creation-networks-62797.jpg?v=1757946000\" alt=\"Meyer Sound UPM-1XP weather-resistant IntelligentDC loudspeaker with EN-3 connector\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPM-1XP combines two 5-inch low-frequency cone drivers with a 1-inch metal dome tweeter on a constant-directivity horn, all driven by a three-channel class D amplifier with active crossover, phase correction, and driver protection. The two woofers operate in parallel at low frequencies, with one rolling off above 320 Hz to suppress comb filtering and maintain consistent midrange response. This weather-protected version adds treatment for fixed installations exposed to the elements, while retaining the IntelligentDC advantage of receiving DC power and balanced audio over a single cable with tolerance for voltage drops across long, light-gauge runs. It requires a Meyer Sound IntelligentDC external power supply such as the MPS-482HP or MPS-488HP. For the AC-powered platform, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input\"\u003eMeyer Sound UPM-1P\u003c\/a\u003e, and add the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC subwoofer\u003c\/a\u003e for full-range output. Explore the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather Protection\u003c\/strong\u003e — This version is treated for fixed installations exposed to outdoor conditions and demanding environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Technology\u003c\/strong\u003e — A single cable carries both 48 V DC power and balanced audio, eliminating AC conduit while preserving the benefits of a self-powered system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed EN3 Connector\u003c\/strong\u003e — This configuration uses a sealed SwitchCraft EN3 5-pin male connector suited to permanent and exposed installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltraCompact Enclosure\u003c\/strong\u003e — The trapezoidal birch cabinet measures 6.85 inches wide by 18 inches tall and weighs 17 lb for discreet placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Channel Amplification\u003c\/strong\u003e — An integrated class D amplifier with 650 W peak output drives the two 5-inch woofers and 1-inch tweeter with onboard processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint-Source Crossover\u003c\/strong\u003e — One woofer rolls off above 320 Hz to eliminate comb filtering and preserve a uniform midrange across the coverage area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Symmetrical Coverage\u003c\/strong\u003e — Matched 100° horizontal and 100° vertical coverage maintains consistent directional control over broad listening areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM distortion remain below 0.02 percent for clean reproduction of speech and program material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides vocal reinforcement and frontfill for outdoor courtyards and exposed worship spaces with weather protection and simplified cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Serves as a frontfill or under-balcony delay loudspeaker in venues with exposed or semi-outdoor seating areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment Space\u003c\/strong\u003e — Delivers clear voice reinforcement at exposed assembly and ceremonial areas with centralized power supplies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports flexible indoor and covered-outdoor events that require a compact, weather-protected loudspeaker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e75 Hz – 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80 Hz – 16 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e300 Hz – 18 kHz ±60°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;14 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° horizontal x 100° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 5-inch cone drivers; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 1-inch metal dome tweeter; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-channel, class D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e650 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 5-pin male (two pins DC power, three pins balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC; Meyer Sound IntelligentDC external power supply required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW: 6.85 in (174 mm) x H: 18.00 in (457 mm) x D: 7.70 in (196 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e17 lb (7.7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with slightly textured black finish; weather-protected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThree 3\/8-inch-16 or metric M10 nut plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does weather-resistant mean for this model?\u003c\/strong\u003e\u003cbr\u003eThis version of the UPM-1XP is treated by Meyer Sound for fixed installations exposed to outdoor and demanding environmental conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a separate power supply?\u003c\/strong\u003e\u003cbr\u003eYes. It requires a Meyer Sound IntelligentDC external power supply, such as the MPS-482HP or MPS-488HP, which delivers 48 V DC and balanced audio over a single cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connector does this version use?\u003c\/strong\u003e\u003cbr\u003eThis configuration uses a sealed SwitchCraft EN3 5-pin male connector carrying both 48 V DC power and balanced audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long can the cable runs be?\u003c\/strong\u003e\u003cbr\u003eComposite cables such as Belden 1502 can deliver power and audio up to 150 feet with about 1 dB of peak SPL loss using 18 AWG wire, with longer runs possible using heavier gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":46555549958380,"sku":"09.084.140.06","price":4370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input-creation-networks-62797.jpg?v=1757946000"},{"product_id":"meyer-sound-upm-1xp-2x5-active-speaker-3-pin-input-phx-5-weather-resistant","title":"Meyer Sound UPM-1XP 2x5\" Active Speaker, 3-Pin Input, PHX-5 (Weather-Resistant) - 09.084.140.16","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UPM-1XP Weather-Resistant is a compact, externally powered wide-coverage loudspeaker that combines IntelligentDC technology with weather protection for fixed outdoor and exposed installations. It delivers the same high sound pressure levels, low distortion, and symmetrical 100° by 100° coverage as the standard UPM-1XP, drawing both 48 V DC power and balanced audio over a single cable. This configuration uses a Phoenix 5-pin male connector, a terminal-style interface convenient for installed systems. It is an effective choice for frontfill, under-balcony delay, and vocal reinforcement in venues where the loudspeaker is exposed to the elements.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input-creation-networks-62797.jpg?v=1757946000\" alt=\"Meyer Sound UPM-1XP weather-resistant IntelligentDC loudspeaker with PHX-5 Phoenix connector\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPM-1XP combines two 5-inch low-frequency cone drivers with a 1-inch metal dome tweeter on a constant-directivity horn, all driven by a three-channel class D amplifier with active crossover, phase correction, and driver protection. The two woofers operate in parallel at low frequencies, with one rolling off above 320 Hz to suppress comb filtering and maintain consistent midrange response. This weather-protected version adds treatment for fixed installations exposed to the elements, while retaining the IntelligentDC advantage of receiving DC power and balanced audio over a single cable with tolerance for voltage drops across long, light-gauge runs. It requires a Meyer Sound IntelligentDC external power supply such as the MPS-482HP or MPS-488HP. For the AC-powered platform, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input\"\u003eMeyer Sound UPM-1P\u003c\/a\u003e, and add the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC subwoofer\u003c\/a\u003e for full-range output. Explore the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather Protection\u003c\/strong\u003e — This version is treated for fixed installations exposed to outdoor conditions and demanding environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Technology\u003c\/strong\u003e — A single cable carries both 48 V DC power and balanced audio, eliminating AC conduit while preserving the benefits of a self-powered system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhoenix 5-Pin Connector\u003c\/strong\u003e — This configuration uses a Phoenix 5-pin male connector, a terminal-style interface convenient for installed system wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltraCompact Enclosure\u003c\/strong\u003e — The trapezoidal birch cabinet measures 6.85 inches wide by 18 inches tall and weighs 17 lb for discreet placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Channel Amplification\u003c\/strong\u003e — An integrated class D amplifier with 650 W peak output drives the two 5-inch woofers and 1-inch tweeter with onboard processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint-Source Crossover\u003c\/strong\u003e — One woofer rolls off above 320 Hz to eliminate comb filtering and preserve a uniform midrange across the coverage area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Symmetrical Coverage\u003c\/strong\u003e — Matched 100° horizontal and 100° vertical coverage maintains consistent directional control over broad listening areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM distortion remain below 0.02 percent for clean reproduction of speech and program material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides vocal reinforcement and frontfill for outdoor courtyards and exposed worship spaces with weather protection and simplified cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Serves as a frontfill or under-balcony delay loudspeaker in venues with exposed or semi-outdoor seating areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment Space\u003c\/strong\u003e — Delivers clear voice reinforcement at exposed assembly and ceremonial areas with centralized power supplies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Supports flexible indoor and covered-outdoor events that require a compact, weather-protected loudspeaker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e75 Hz – 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80 Hz – 16 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e300 Hz – 18 kHz ±60°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;14 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° horizontal x 100° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 5-inch cone drivers; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 1-inch metal dome tweeter; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-channel, class D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e650 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhoenix 5-pin male (two pins DC power, three pins balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC; Meyer Sound IntelligentDC external power supply required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW: 6.85 in (174 mm) x H: 18.00 in (457 mm) x D: 7.70 in (196 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e17 lb (7.7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch with slightly textured black finish; weather-protected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThree 3\/8-inch-16 or metric M10 nut plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does weather-resistant mean for this model?\u003c\/strong\u003e\u003cbr\u003eThis version of the UPM-1XP is treated by Meyer Sound for fixed installations exposed to outdoor and demanding environmental conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a separate power supply?\u003c\/strong\u003e\u003cbr\u003eYes. It requires a Meyer Sound IntelligentDC external power supply, such as the MPS-482HP or MPS-488HP, which delivers 48 V DC and balanced audio over a single cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connector does this version use?\u003c\/strong\u003e\u003cbr\u003eThis configuration uses a Phoenix 5-pin male connector carrying both 48 V DC power and balanced audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long can the cable runs be?\u003c\/strong\u003e\u003cbr\u003eComposite cables such as Belden 1502 can deliver power and audio up to 150 feet with about 1 dB of peak SPL loss using 18 AWG wire, with longer runs possible using heavier gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":46555550777580,"sku":"09.084.140.16","price":4370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-upm-1p-2x5-active-speaker-3-pin-input-creation-networks-62797.jpg?v=1757946000"},{"product_id":"meyer-sound-upm-1p-us-std-m10-attn-loudspeaker-09-084-001-32","title":"Meyer Sound UPM-1P US STD M10 ATTN Loudspeaker - 09.084.001.32","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound UPM-1P is a self-powered ultracompact loudspeaker for commercial AV installation where space is tight but consistent coverage still matters. Its small enclosure suits fill, surround, and front-of-house duty in fixed venues, and the onboard attenuator simplifies level setting across a distributed loudspeaker system. As a self-powered loudspeaker, it removes a dedicated amplifier channel from the rack and shortens commissioning.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe UPM-1P targets integrators and AV system designers who need a compact full-range source that integrates cleanly into a larger Meyer Sound design. Amplification and processing are built into the cabinet, so this commercial AV loudspeaker drops in downstream of a matrix or DSP without external amplification. The US STD configuration is wired for North American mains. M10 rigging points support flown, bracketed, or surface mounting, and the onboard attenuator (ATTN) lets installers trim output without reprogramming the system processor. It pairs with larger Meyer Sound loudspeakers and subwoofers available on \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003ecreationnetworks.net\u003c\/a\u003e for matched, full-range coverage.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Architecture\u003c\/strong\u003e — Internal amplification and processing remove a dedicated amplifier channel from the rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltracompact Enclosure\u003c\/strong\u003e — A small footprint suits fill, surround, and tight sightline-sensitive installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard Attenuator\u003c\/strong\u003e — The ATTN option lets installers trim level locally without reprogramming the processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM10 Rigging Points\u003c\/strong\u003e — Threaded points support flown, bracketed, and surface mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNorth American Power Configuration\u003c\/strong\u003e — The US STD variant is set for domestic mains.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Even coverage for speech and program material across tiered seating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference Room\u003c\/strong\u003e — Compact fill and reinforcement for executive and mid-size rooms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Vocal clarity and music reproduction in acoustically demanding rooms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial Meeting Space\u003c\/strong\u003e — High-intelligibility reinforcement for large rooms and divisible spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Flexible output for spaces that alternate between speech and music.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs the UPM-1P compatible with my existing signal chain?\u003c\/strong\u003e\u003cbr\u003eIt is a self-powered loudspeaker that accepts a line-level input, so it integrates downstream of most commercial AV matrix switchers and DSP processors without an external amplifier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is involved in installing the UPM-1P?\u003c\/strong\u003e\u003cbr\u003eIt mounts through the Meyer Sound rigging and mounting ecosystem for flown, stacked, or surface configurations and is intended for permanent indoor installation. Confirm rigging hardware against your specific mounting plan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it fit into a larger AV system?\u003c\/strong\u003e\u003cbr\u003eAs a self-powered box it works as a standalone source or alongside matched Meyer Sound subwoofers for full-range coverage. Comparable loudspeakers are available on \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat about warranty and support?\u003c\/strong\u003e\u003cbr\u003eWarranty and support follow Meyer Sound's published policy; our team can confirm current coverage and lead times before purchase.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":47691802083564,"sku":"09.084.001.32","price":4300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/upm_main.png?v=1789169189"}],"url":"https:\/\/creationnetworks.net\/collections\/meyer-sound-installed-point-source.oembed","provider":"Creation Networks","version":"1.0","type":"link"}