{"title":"Meyer Sound Architectural \u0026 Residential Loudspeakers","description":"\u003cp\u003eThis collection covers Meyer Sound's small-format installed loudspeakers — the in-ceiling, miniature surface-mount and compact subwoofer models used in residential listening rooms, home theaters and the architectural spaces where a visible loudspeaker is not an option. Most of what is here runs on IntelligentDC, which is the reason to specify these products rather than a conventional install speaker: the loudspeaker receives DC power and audio over a single cable from a rack-mounted supply, so there is no amplifier at the speaker, no local AC, and no amp rack to size against driver loads.\u003c\/p\u003e\n\n\u003ch2\u003eAshby in-ceiling loudspeakers\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black\"\u003eAshby-8C\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-5c-5-5-active-speaker-with-attn-black\"\u003eAshby-5C\u003c\/a\u003e are self-powered in-ceiling loudspeakers in 8-inch and 5-inch formats, stocked in black and white, with and without a rear attenuator. The 8C is the wider-bandwidth choice for primary listening; the 5C fits tighter ceiling cavities and secondary zones. Trim and mounting hardware is stocked alongside them — tile C rings, C rings with bridge, new-construction brackets, grille frame assemblies in both finishes, and pendant kits for open ceilings. On a remodel the C ring and bridge kits matter as much as the speaker: they are what lets the installer land the cutout cleanly in an existing ceiling.\u003c\/p\u003e\n\n\u003ch2\u003eMM-4XP and UP-4slim surface-mount\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-black\"\u003eMM-4XP\u003c\/a\u003e is a four-inch self-powered loudspeaker small enough to disappear against architecture, available in black and white with a universal U-bracket kit in either finish. The \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xpd-black-directional-miniature-self-powered-loudspeaker-en-3-global\"\u003eMM-4XPD\u003c\/a\u003e adds directional pattern control in the same footprint, which is what you specify when the loudspeaker sits close to a seated listener and spill into the next zone is the problem. \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-up-4slim-2x4-3-way-active-speaker-m8-5-pin-input\"\u003eUP-4slim\u003c\/a\u003e is the shallow three-way option for walls and soffits where depth is the constraint, with U-bracket and yoke mounting kits and a weather-resistant version for covered outdoor areas.\u003c\/p\u003e\n\n\u003ch2\u003eMM-10 compact subwoofers\u003c\/h2\u003e\n\u003cp\u003eThe MM-10 family provides low-frequency extension without a floor-standing cabinet. \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-10acx-10-active-subwoofer-3-pin-input\"\u003eMM-10ACX\u003c\/a\u003e and MM-10AC take AC at the subwoofer and pass IntelligentDC through to satellites; MM-10XP is the fully DC-powered version. All are stocked in standard and weather-resistant builds with three-pin and five-pin input options, so the connector scheme stays consistent across an installed system.\u003c\/p\u003e\n\n\u003ch2\u003eIntelligentDC power supplies and cabling\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mps-482hp-2-channel-power-supply-5-pin-phoenix-output-1ru\"\u003eMPS-482HP\u003c\/a\u003e drives two channels and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mps-488x-8-channel-power-supply-5-pin-phoenix-output-1ru-w-monitor\"\u003eMPS-488X\u003c\/a\u003e drives eight, both in a single rack unit, with a 2RU tray kit and a wall bracket kit for installations without a rack. EN3 and Phoenix cable assemblies are stocked in 10, 20, 30, 50, 100 and 150-foot lengths — worth pulling the run lengths off the drawings and ordering with the loudspeakers, because these are the parts that hold up a trim-out.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifying an installed system\u003c\/h2\u003e\n\u003cp\u003eThe constraint on this kind of work is almost never the loudspeaker. It is ceiling cavity depth, cable path, where the rack lives, and how many channels one supply can carry across the run lengths involved. Creation Networks handles the design, equipment selection, installation and commissioning rather than shipping parts and leaving the coordination to the builder. If the room is still in drawings, that is the right time to talk. Call 888-230-3661 or email sales@creationnetworks.net.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"Service\",\n  \"name\": \"Meyer Sound Architectural \u0026 Residential Loudspeakers\",\n  \"provider\": {\n    \"@type\": \"Organization\",\n    \"name\": \"Creation Networks\",\n    \"url\": \"https:\/\/www.creationnetworks.net\",\n    \"telephone\": \"+1-888-230-3661\"\n  },\n  \"areaServed\": \"US\",\n  \"description\": \"Meyer Sound small-format architectural loudspeakers including Ashby in-ceiling, MM-4XP\/UP-4slim surface-mount, and MM-10 subwoofers running on IntelligentDC power.\"\n}\n\u003c\/script\u003e","products":[{"product_id":"meyer-sound-usw-210p-mm-10-base-plate-assy-kit","title":"Meyer Sound USW-210P\/MM-10 Base Plate Assy Kit - 40.010.970.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound USW-210P\/MM-10 Base Plate Assembly Kit is a mounting accessory that provides a stable foundation for free-standing vertical placement of compatible Meyer Sound subwoofers. It is intended for installers who need to securely position a USW-210P or MM-10 subwoofer upright with connectors at the top or bottom.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-210pmm-10-base-plate-assy-kit-creation-networks-94349.webp?v=1757941359\" alt=\"Meyer Sound USW-210P\/MM-10 base plate assembly kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThis aluminum base plate assembly enhances stability when a compatible subwoofer is placed free-standing in a vertical orientation. It is an installation accessory for the USW-210P 2x10\" subwoofer and MM-10 family enclosures. To browse the matching loudspeakers and additional mounting hardware, see the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum construction\u003c\/strong\u003e — The base plate is built from aluminum for durable, stable free-standing support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical placement support\u003c\/strong\u003e — Allows the subwoofer to be securely positioned upright with connectors at the top or bottom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer compatibility\u003c\/strong\u003e — Designed for use with the Meyer Sound USW-210P and MM-10 family subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete assembly kit\u003c\/strong\u003e — Supplied as an assembly kit for straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eType\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eBase plate assembly kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCompatibility\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound USW-210P and MM-10 subwoofers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFunction\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFree-standing vertical placement stability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924547821804,"sku":"40.010.970.01","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-usw-210pmm-10-base-plate-assy-kit-creation-networks-94349.webp?v=1757941359"},{"product_id":"meyer-sound-mm-10ac-10-active-subwoofer-3-pin-input","title":"Meyer Sound MM-10AC 10\" Active Subwoofer, 3-Pin Input - 09.199.012.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MM-10AC is an AC-powered 10\" miniature subwoofer that adds discreet low-frequency extension to compact installed sound systems built around small-format Meyer Sound loudspeakers. With a single 10-inch driver in a low-profile cabinet, this 3-pin XLR model suits houses of worship, conference rooms, retail and hospitality spaces, and multi-purpose AV systems where a full-size subwoofer would be impractical. It provides a self-contained, mains-powered bass solution with onboard amplification and processing.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985\" alt=\"Meyer Sound MM-10AC 10 inch active subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MM-10AC houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection. This AC model accepts balanced audio over a 3-pin XLR female input with an XLR male loop output for daisy-chaining, and uses a powerCON 20 AC connector with loop output. An input polarity switch allows the audio polarity to be reversed between pins 2 and 3, and an Intelligent AC supply provides automatic voltage selection from 90 to 265 V AC. The compact birch enclosure carries top and side nut plates for mounting and accepts the optional MUB-MM10 U-bracket. As a miniature subwoofer, the MM-10AC complements small Meyer Sound systems where the larger USW-112P would not fit. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks for matched loudspeakers.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC-powered design\u003c\/strong\u003e — Self-contained mains operation with an Intelligent AC supply and automatic voltage selection from 90 to 265 V AC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-inch driver\u003c\/strong\u003e — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-pin XLR with loop\u003c\/strong\u003e — Balanced audio input on a 3-pin XLR female connector with an XLR male loop output for daisy-chaining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard Class D amplifier delivers 440 W peak with driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput polarity switch\u003c\/strong\u003e — Reverses audio input polarity between pins 2 and 3 for system alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact enclosure\u003c\/strong\u003e — Premium multi-ply birch cabinet measuring 19 x 11 x 12 inches for discreet placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rigging\u003c\/strong\u003e — Top and side nut plates with 3\/8-inch or M10 threads accept the optional MUB-MM10 U-bracket for wall or ceiling mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Adds discreet low-frequency support to compact sanctuary sound systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference room\u003c\/strong\u003e — Extends bass for program audio in a miniature, easily concealed form factor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Provides flexible low-frequency support for varied small-format AV systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTraining room\u003c\/strong\u003e — Supplies controlled bass extension for instructional AV playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33–228 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–208 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38–138 Hz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;11 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 10-inch cone driver, 2-inch voice coil, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass D, 440 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR female input with XLR male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz; auto voltage selection 90–265 V AC; powerCON 20 with loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 19 in x H 11 in x D 12 in (483 x 279 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.2 lb (12.79 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish; hex-stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and side nut plates, 3\/8-inch or M10 threads; optional MUB-MM10 U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow is the MM-10AC powered?\u003c\/strong\u003e It is AC-powered with an Intelligent AC supply, accepting 100–240 V AC over a powerCON 20 connector with loop output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat audio connection does it use?\u003c\/strong\u003e This AC model uses a 3-pin XLR female input with an XLR male loop output for daisy-chaining, plus an input polarity switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e It has top and side nut plates with 3\/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat loudspeakers does it pair with?\u003c\/strong\u003e As a miniature subwoofer, it is intended to extend the low end of compact Meyer Sound loudspeaker systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924582555884,"sku":"09.199.012.01","price":3330.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985"},{"product_id":"meyer-sound-mm-10ac-w-p-m10-powercon-us","title":"Meyer Sound MM-10AC-WP-3 10\" Active Subwoofer with Weather Protection, 3-Pin Input - 09.199.012.11","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MM-10AC-WP-3 is a weather-protected, AC-powered 10\" miniature subwoofer that brings discreet low-frequency extension to compact installed sound systems in covered outdoor and semi-exposed locations. With a single 10-inch driver in a low-profile cabinet and a 3-pin XLR input, this weather-protected model suits houses of worship, outdoor hospitality and retail spaces, and architectural AV installs where space, durability, and visual discretion all matter.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985\" alt=\"Meyer Sound MM-10AC-WP-3 weather-protected miniature subwoofer\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MM-10AC-WP-3 houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection, and adds Meyer Sound weather protection for exposed environments. It accepts balanced audio over a 3-pin XLR female input with an XLR male loop output for daisy-chaining and uses a powerCON 20 AC connector with loop output. An input polarity switch reverses audio polarity between pins 2 and 3, and the Intelligent AC supply provides automatic voltage selection from 90 to 265 V AC. The compact birch enclosure carries top and side nut plates and accepts the optional MUB-MM10 U-bracket. For an indoor configuration, compare the standard MM-10AC, and browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather protection\u003c\/strong\u003e — Factory weather-protection treatment allows installation in covered outdoor and semi-exposed environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC-powered design\u003c\/strong\u003e — Self-contained mains operation with an Intelligent AC supply and automatic voltage selection from 90 to 265 V AC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-inch driver\u003c\/strong\u003e — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-pin XLR with loop\u003c\/strong\u003e — Balanced audio input on a 3-pin XLR female connector with an XLR male loop output for daisy-chaining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard Class D amplifier delivers 440 W peak with driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput polarity switch\u003c\/strong\u003e — Reverses audio input polarity between pins 2 and 3 for system alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rigging\u003c\/strong\u003e — Top and side nut plates with 3\/8-inch or M10 threads accept the optional MUB-MM10 U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Provides discreet low-frequency support for sanctuaries and covered exterior gathering areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible small-format AV systems where weather resistance is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low end for speech and music in performance and assembly spaces, including exposed structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment space\u003c\/strong\u003e — Delivers durable low-frequency output for covered exterior briefing and assembly areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33–228 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–208 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38–138 Hz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;11 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 10-inch cone driver, 2-inch voice coil, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass D, 440 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR female input with XLR male loop output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz; auto voltage selection 90–265 V AC; powerCON 20 with loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 19 in x H 11 in x D 12 in (483 x 279 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.2 lb (12.79 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish, weather protected; hex-stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and side nut plates, 3\/8-inch or M10 threads; optional MUB-MM10 U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the weather protection cover?\u003c\/strong\u003e The WP treatment is a factory option that allows the MM-10AC to be installed in covered outdoor and semi-exposed locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e It is AC-powered with an Intelligent AC supply, accepting 100–240 V AC over a powerCON 20 connector with loop output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat audio connection does it use?\u003c\/strong\u003e This WP-3 model uses a 3-pin XLR female input with an XLR male loop output for daisy-chaining.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e It has top and side nut plates with 3\/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924584161516,"sku":"09.199.012.11","price":4250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985"},{"product_id":"meyer-sound-mm-10acx-10-active-subwoofer-3-pin-input","title":"Meyer Sound MM-10ACX 10\" Active Subwoofer, 3-Pin Input - 09.199.013.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MM-10ACX is an AC-powered 10\" miniature subwoofer with integrated satellite outputs, designed to anchor compact installed sound systems built around small-format Meyer Sound IntelligentDC loudspeakers. This 3-pin XLR model powers and feeds connected MM-4XP-class satellites directly, creating a self-contained sub-satellite package for houses of worship, conference and huddle rooms, retail and hospitality spaces, and multi-purpose AV systems where space is limited.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985\" alt=\"Meyer Sound MM-10ACX 10 inch active subwoofer with satellite outputs\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MM-10ACX houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection. Beyond the subwoofer itself, it provides two XLR female satellite inputs and two IntelligentDC satellite outputs (Phoenix or EN3 5-pin), distributing DC power and balanced audio to connected satellite loudspeakers such as the MM-4XP. A gain knob adjusts the subwoofer level from fully attenuated to +10 dB, and an input select switch determines whether the sub draws its signal from the subwoofer input or the summed satellite inputs. This 3-pin XLR version uses a powerCON 20 AC connector with loop output. As a miniature sub-satellite hub, the MM-10ACX complements small Meyer Sound systems where the larger USW-112P would not fit. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated satellite power\u003c\/strong\u003e — Two IntelligentDC outputs (Phoenix or EN3 5-pin) distribute DC power and balanced audio to satellite loudspeakers such as the MM-4XP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite inputs\u003c\/strong\u003e — Two XLR female satellite inputs feed connected satellites and can be summed to the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain control\u003c\/strong\u003e — A gain knob adjusts the subwoofer signal from completely attenuated to +10 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput select switch\u003c\/strong\u003e — Selects whether the subwoofer takes its signal from the subwoofer input or the summed satellite inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-inch driver\u003c\/strong\u003e — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard Class D amplifier delivers 440 W peak with driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC-powered design\u003c\/strong\u003e — Intelligent AC supply with automatic voltage selection from 90 to 265 V AC and a powerCON 20 connector with loop output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rigging\u003c\/strong\u003e — Top and side nut plates with 3\/8-inch or M10 threads accept the optional MUB-MM10 U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Anchors a discreet sub-satellite system for compact sanctuary sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHuddle room\u003c\/strong\u003e — Provides a complete low-profile sub-satellite package for small collaboration spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference room\u003c\/strong\u003e — Powers and feeds satellite loudspeakers for full-range program audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible small-format AV systems from a single powered hub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTraining room\u003c\/strong\u003e — Delivers controlled bass and satellite distribution for instructional AV playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33–228 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–208 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38–138 Hz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;11 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 10-inch cone driver, 2-inch voice coil, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass D, 440 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR female subwoofer input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSatellite Connectors\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo XLR female inputs; two Phoenix or EN3 5-pin IntelligentDC outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz; auto voltage selection 90–265 V AC; powerCON 20 with loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 19 in x H 11 in x D 12 in (483 x 279 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30.8 lb (13.97 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish; hex-stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and side nut plates, 3\/8-inch or M10 threads; optional MUB-MM10 U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow does the MM-10ACX differ from the MM-10AC?\u003c\/strong\u003e The ACX version adds two XLR satellite inputs, two IntelligentDC satellite outputs, a gain knob, and an input select switch, letting it power and feed satellite loudspeakers directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat satellite loudspeakers can it power?\u003c\/strong\u003e Its IntelligentDC outputs are designed to power and feed Meyer Sound IntelligentDC satellites such as the MM-4XP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat audio connection does this model use?\u003c\/strong\u003e This 3-pin version uses a 3-pin XLR female subwoofer input plus the satellite input and output connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e It has top and side nut plates with 3\/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924588912876,"sku":"09.199.013.01","price":3850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985"},{"product_id":"meyer-sound-mm-10acx-std-m10-powercon-us-phoenix","title":"Meyer Sound MM-10ACX-5 10\" Active Subwoofer, 5-Pin Input - 09.199.014.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MM-10ACX-5 is an AC-powered 10\" miniature subwoofer with integrated satellite outputs, configured with 5-pin Phoenix satellite connectors for compact installed sound systems built around small-format Meyer Sound IntelligentDC loudspeakers. It powers and feeds connected MM-4XP-class satellites directly, forming a self-contained sub-satellite package for houses of worship, conference and huddle rooms, retail and hospitality spaces, and multi-purpose AV systems where space is at a premium.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985\" alt=\"Meyer Sound MM-10ACX-5 10 inch active subwoofer with 5-pin satellite outputs\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MM-10ACX-5 houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection. It provides two XLR female satellite inputs and two IntelligentDC satellite outputs on 5-pin Phoenix connectors, distributing DC power and balanced audio to connected satellite loudspeakers such as the MM-4XP. A gain knob adjusts the subwoofer level from fully attenuated to +10 dB, and an input select switch determines whether the sub draws its signal from the subwoofer input or the summed satellite inputs. AC power is supplied through a powerCON 20 connector with loop output. As a miniature sub-satellite hub, the MM-10ACX-5 complements small Meyer Sound systems where the larger USW-112P would not fit. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-pin Phoenix satellite outputs\u003c\/strong\u003e — Two IntelligentDC outputs on 5-pin Phoenix connectors distribute DC power and balanced audio to satellite loudspeakers such as the MM-4XP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite inputs\u003c\/strong\u003e — Two XLR female satellite inputs feed connected satellites and can be summed to the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain control\u003c\/strong\u003e — A gain knob adjusts the subwoofer signal from completely attenuated to +10 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput select switch\u003c\/strong\u003e — Selects whether the subwoofer takes its signal from the subwoofer input or the summed satellite inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-inch driver\u003c\/strong\u003e — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard Class D amplifier delivers 440 W peak with driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC-powered design\u003c\/strong\u003e — Intelligent AC supply with automatic voltage selection from 90 to 265 V AC and a powerCON 20 connector with loop output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rigging\u003c\/strong\u003e — Top and side nut plates with 3\/8-inch or M10 threads accept the optional MUB-MM10 U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Anchors a discreet sub-satellite system for compact sanctuary sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHuddle room\u003c\/strong\u003e — Provides a complete low-profile sub-satellite package for small collaboration spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference room\u003c\/strong\u003e — Powers and feeds satellite loudspeakers for full-range program audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible small-format AV systems from a single powered hub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTraining room\u003c\/strong\u003e — Delivers controlled bass and satellite distribution for instructional AV playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33–228 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–208 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38–138 Hz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;11 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 10-inch cone driver, 2-inch voice coil, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass D, 440 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR female subwoofer input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSatellite Connectors\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo XLR female inputs; two 5-pin Phoenix IntelligentDC outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz; auto voltage selection 90–265 V AC; powerCON 20 with loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 19 in x H 11 in x D 12 in (483 x 279 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30.8 lb (13.97 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish; hex-stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and side nut plates, 3\/8-inch or M10 threads; optional MUB-MM10 U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat distinguishes the MM-10ACX-5?\u003c\/strong\u003e This configuration provides its IntelligentDC satellite outputs on 5-pin Phoenix connectors for distributing DC power and balanced audio to connected satellites.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat satellite loudspeakers can it power?\u003c\/strong\u003e Its IntelligentDC outputs are designed to power and feed Meyer Sound IntelligentDC satellites such as the MM-4XP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat additional controls does it offer?\u003c\/strong\u003e It includes a gain knob (fully attenuated to +10 dB) and an input select switch for choosing the subwoofer or summed satellite inputs as the source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e It has top and side nut plates with 3\/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924590158060,"sku":"09.199.014.01","price":3850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985"},{"product_id":"meyer-sound-mm-10acx-w-p-m10-powercon-us-en3","title":"Meyer Sound MM-10ACX-WP-3 10\" Active Subwoofer with Weather Protection, 3-Pin Input - 09.199.013.11","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MM-10ACX-WP-3 is a weather-protected, AC-powered 10\" miniature subwoofer with integrated satellite outputs, configured with EN3 satellite connectors for compact installed sound systems in covered outdoor and semi-exposed locations. It powers and feeds connected Meyer Sound IntelligentDC satellites directly while withstanding the elements, making it well suited to houses of worship, outdoor hospitality and retail spaces, and architectural AV installs requiring a durable, low-profile sub-satellite package.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985\" alt=\"Meyer Sound MM-10ACX-WP-3 weather-protected subwoofer with satellite outputs\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MM-10ACX-WP-3 houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection, and adds Meyer Sound weather protection for exposed environments. It provides two XLR female satellite inputs and two IntelligentDC satellite outputs (EN3 5-pin), distributing DC power and balanced audio to connected satellite loudspeakers such as the MM-4XP. A gain knob adjusts the subwoofer level from fully attenuated to +10 dB, and an input select switch determines whether the sub draws its signal from the subwoofer input or the summed satellite inputs. AC power is supplied through a powerCON 20 connector with loop output. For an indoor configuration, compare the standard MM-10ACX, and browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather protection\u003c\/strong\u003e — Factory weather-protection treatment allows installation in covered outdoor and semi-exposed environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 satellite outputs\u003c\/strong\u003e — Two IntelligentDC outputs on EN3 5-pin connectors distribute DC power and balanced audio to satellite loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite inputs\u003c\/strong\u003e — Two XLR female satellite inputs feed connected satellites and can be summed to the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain control\u003c\/strong\u003e — A gain knob adjusts the subwoofer signal from completely attenuated to +10 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput select switch\u003c\/strong\u003e — Selects whether the subwoofer takes its signal from the subwoofer input or the summed satellite inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-inch driver\u003c\/strong\u003e — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard Class D amplifier delivers 440 W peak with driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rigging\u003c\/strong\u003e — Top and side nut plates with 3\/8-inch or M10 threads accept the optional MUB-MM10 U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Anchors a discreet, weather-resistant sub-satellite system for sanctuaries and covered exterior areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible small-format AV systems where weather resistance is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low end for speech and music in performance and assembly spaces, including exposed structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment space\u003c\/strong\u003e — Delivers durable low-frequency output and satellite distribution for covered exterior briefing areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33–228 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–208 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38–138 Hz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;11 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 10-inch cone driver, 2-inch voice coil, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass D, 440 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR female subwoofer input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSatellite Connectors\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo XLR female inputs; two EN3 5-pin IntelligentDC outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz; auto voltage selection 90–265 V AC; powerCON 20 with loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 19 in x H 11 in x D 12 in (483 x 279 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30.8 lb (13.97 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish, weather protected; hex-stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and side nut plates, 3\/8-inch or M10 threads; optional MUB-MM10 U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the weather protection cover?\u003c\/strong\u003e The WP treatment is a factory option that allows the MM-10ACX to be installed in covered outdoor and semi-exposed locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat satellite connector does this model use?\u003c\/strong\u003e This WP-3 configuration provides its IntelligentDC satellite outputs on EN3 5-pin connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat satellite loudspeakers can it power?\u003c\/strong\u003e Its IntelligentDC outputs are designed to power and feed Meyer Sound IntelligentDC satellites such as the MM-4XP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e It has top and side nut plates with 3\/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924590354668,"sku":"09.199.013.11","price":4760.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985"},{"product_id":"meyer-sound-mm-10acx-w-p-m10-powercon-us-phoenix","title":"Meyer Sound MM-10ACX-WP-5 10\" Active Subwoofer with Weather Protection, 5-Pin Input - 09.199.014.11","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Meyer Sound MM-10ACX-WP-5 is a weather-protected, AC-powered 10\" miniature subwoofer with integrated satellite outputs, configured with 5-pin Phoenix satellite connectors for compact installed sound systems in covered outdoor and semi-exposed locations. It powers and feeds connected Meyer Sound IntelligentDC satellites directly while withstanding the elements, suiting houses of worship, outdoor hospitality and retail spaces, and architectural AV installs that require a durable, low-profile sub-satellite package.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985\" alt=\"Meyer Sound MM-10ACX-WP-5 weather-protected subwoofer with 5-pin satellite outputs\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MM-10ACX-WP-5 houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection, and adds Meyer Sound weather protection for exposed environments. It provides two XLR female satellite inputs and two IntelligentDC satellite outputs on 5-pin Phoenix connectors, distributing DC power and balanced audio to connected satellite loudspeakers such as the MM-4XP. A gain knob adjusts the subwoofer level from fully attenuated to +10 dB, and an input select switch determines whether the sub draws its signal from the subwoofer input or the summed satellite inputs. AC power is supplied through a powerCON 20 connector with loop output. For an indoor configuration, compare the standard MM-10ACX, and browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather protection\u003c\/strong\u003e — Factory weather-protection treatment allows installation in covered outdoor and semi-exposed environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-pin Phoenix satellite outputs\u003c\/strong\u003e — Two IntelligentDC outputs on 5-pin Phoenix connectors distribute DC power and balanced audio to satellite loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite inputs\u003c\/strong\u003e — Two XLR female satellite inputs feed connected satellites and can be summed to the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain control\u003c\/strong\u003e — A gain knob adjusts the subwoofer signal from completely attenuated to +10 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput select switch\u003c\/strong\u003e — Selects whether the subwoofer takes its signal from the subwoofer input or the summed satellite inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-inch driver\u003c\/strong\u003e — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D amplification\u003c\/strong\u003e — An onboard Class D amplifier delivers 440 W peak with driver protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rigging\u003c\/strong\u003e — Top and side nut plates with 3\/8-inch or M10 threads accept the optional MUB-MM10 U-bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of worship\u003c\/strong\u003e — Anchors a discreet, weather-resistant sub-satellite system for sanctuaries and covered exterior areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose room\u003c\/strong\u003e — Supports flexible small-format AV systems where weather resistance is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Reinforces low end for speech and music in performance and assembly spaces, including exposed structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment space\u003c\/strong\u003e — Delivers durable low-frequency output and satellite distribution for covered exterior briefing areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOperating Frequency Range\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e33–228 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e35–208 Hz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhase Response\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e38–138 Hz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLinear Peak SPL\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e118.5 dB with crest factor \u0026gt;11 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e360°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eLow Frequency Transducer\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 10-inch cone driver, 2-inch voice coil, 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplifier\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass D, 440 W peak total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTHD, IM, TIM\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAudio Input\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-pin XLR female subwoofer input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSatellite Connectors\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo XLR female inputs; two 5-pin Phoenix IntelligentDC outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAC Power\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC, 50–60 Hz; auto voltage selection 90–265 V AC; powerCON 20 with loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW 19 in x H 11 in x D 12 in (483 x 279 x 305 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30.8 lb (13.97 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePremium multi-ply birch, textured black finish, weather protected; hex-stamped steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRigging\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and side nut plates, 3\/8-inch or M10 threads; optional MUB-MM10 U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the weather protection cover?\u003c\/strong\u003e The WP treatment is a factory option that allows the MM-10ACX to be installed in covered outdoor and semi-exposed locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat satellite connector does this model use?\u003c\/strong\u003e This WP-5 configuration provides its IntelligentDC satellite outputs on 5-pin Phoenix connectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat satellite loudspeakers can it power?\u003c\/strong\u003e Its IntelligentDC outputs are designed to power and feed Meyer Sound IntelligentDC satellites such as the MM-4XP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e It has top and side nut plates with 3\/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this subwoofer covered by a warranty?\u003c\/strong\u003e Yes, it is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924591436012,"sku":"09.199.014.11","price":4760.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-10acx-wp-5-10-active-subwoofer-with-weather-protection-5-pin-input-creation-networks-58863.webp?v=1757945985"},{"product_id":"meyer-sound-mm-4xp-10ft-cable-en3-to-pigtail-black","title":"Meyer Sound MM-4XP EN3 5-pin female to pigtail, Black - 28.163.009.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThis Meyer Sound MM-4XP EN3 5-pin female to pigtail cable is the factory interconnect supplied for IntelligentDC loudspeakers fitted with an EN3 connector. It mates to the loudspeaker's SwitchCraft EN3 5-pin male input and breaks out to bare-wire pigtail conductors for splicing to a junction box near the loudspeaker. The pigtail end then receives a longer field cable run back to a Meyer Sound IntelligentDC power supply. This black-jacketed accessory is intended for use with MM-4XP and compatible EN3-equipped loudspeakers.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-4xp-en3-5-pin-female-to-pigtail-black-creation-networks-71816.webp?v=1757941387\" alt=\"Meyer Sound MM-4XP EN3 5-pin female to pigtail cable in black\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe EN3 5-pin connection carries both 48 V DC power and balanced audio on a single cable: two pins for DC power and three pins for balanced audio (audio shield, audio negative, and audio positive). The pigtail end allows installers to terminate the conductors at a junction box, where a longer composite or separate power-and-audio cable from the MPS-482HP or MPS-488HP power supply is connected. This cable is required for IntelligentDC distribution to EN3-equipped loudspeakers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e. For additional Meyer Sound interconnects and loudspeakers, see our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 5-Pin Female Connector\u003c\/strong\u003e — Mates directly to the SwitchCraft EN3 5-pin male input on MM-4XP and compatible IntelligentDC loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtail Termination\u003c\/strong\u003e — Bare-wire conductors allow splicing to a junction box for connection to a longer field cable run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined Power and Audio\u003c\/strong\u003e — Carries both 48 V DC power and balanced audio on a single five-conductor cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Jacket\u003c\/strong\u003e — Discreet black cable finish for visible installation locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eBare-wire pigtail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSignal Carried\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC power (2 pins) plus balanced audio (3 pins)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePin Wiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePin 1: DC (–); Pin 2: DC (+); Pin 3: audio shield; Pin 4: audio (–); Pin 5: audio (+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eJacket Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP, MM-4XPD, and other EN3-equipped Meyer Sound IntelligentDC loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45924592713964,"sku":"28.163.009.01","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-4xp-en3-5-pin-female-to-pigtail-black-creation-networks-71816.webp?v=1757941387"},{"product_id":"meyer-sound-ashby-8c-8-active-speaker-5-pin-input","title":"Meyer Sound Ashby-8C-8\" In-Ceiling Active Speaker without ATTN (White) - 09.260.001.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound Ashby-8C is a self-powered 8-inch in-ceiling loudspeaker engineered for distributed audio systems that demand accurate music reproduction and high speech intelligibility. Built on Meyer Sound's IntelligentDC platform, it delivers a deeper low end and higher SPL than most in-ceiling loudspeakers of comparable size. Its smooth, consistent 100° conical coverage allows fewer units to cover a larger area, reducing overall system count. This white-finish model ships without an onboard attenuator (ATTN) for installations where level is managed upstream.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black-creation-networks-58795.webp?v=1757941512\" alt=\"Meyer Sound Ashby-8C 8-inch in-ceiling active loudspeaker\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ashby-8C combines onboard Class-D amplification with sophisticated signal processing to produce the flat frequency and phase response for which Meyer Sound loudspeakers are known. A 0.75-inch metal-dome tweeter is mounted concentrically over an 8-inch cone driver in a coaxial configuration that maximizes the wave-guide surface for even directivity. The loudspeaker draws balanced audio and 48 V DC power over a single composite cable from a Meyer Sound MPS IntelligentDC power supply, which permits longer, lighter-gauge cable runs without conduit under NEC Class 2 wiring. Its zinc-plated steel back-can is fire-rated for installation in air-handling plenum spaces, and the low-profile perforated steel grille blends discreetly into finished ceilings. For smaller rooms or tighter spacing, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-5c-5-5-active-speaker-with-attn\"\u003eMeyer Sound Ashby-5C\u003c\/a\u003e offers the same IntelligentDC architecture in a 5-inch format, and the full IntelligentDC range is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. This unit is the white, no-attenuator configuration.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard Class-D amplification with a total output power of 440 W peak removes the need for external amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Transducer\u003c\/strong\u003e — A 0.75-inch dome tweeter mounted concentrically over an 8-inch cone driver delivers point-source coherence across the listening area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Conical Coverage\u003c\/strong\u003e — A consistent 100° conical pattern lets fewer loudspeakers cover a larger floor area while maintaining even level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh SPL-to-Size Ratio\u003c\/strong\u003e — Linear peak SPL reaches 114 dB with 19 dB crest factor (M-noise) from a compact ceiling enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Power and Audio\u003c\/strong\u003e — Balanced audio and 48 V DC power are delivered over a single composite cable from an MPS power supply, supporting long, light-gauge runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlenum-Rated Enclosure\u003c\/strong\u003e — The zinc-plated steel back-can is fire-rated to UL 2043 for installation in air-handling ceiling spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM are specified at less than 0.02% for clean reproduction of speech and music.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiscreet Flush Mounting\u003c\/strong\u003e — A low-profile perforated steel grille flush-mounts into ceilings and blends with most interior finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference rooms and boardrooms requiring high-quality distributed program and voice reproduction\u003c\/li\u003e\n\u003cli\u003eHouse of worship sanctuaries and multi-purpose rooms needing wide, even ceiling coverage\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces and all-hands rooms with distributed audio and paging\u003c\/li\u003e\n\u003cli\u003eTraining rooms and government spaces where intelligible speech is critical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e60 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e67 Hz – 16 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e190 Hz – 16 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e114 dB with 19 dB crest factor (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° conical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 8-inch cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 0.75-inch dome tweeter mounted concentrically in wave guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHigh-efficiency, Class-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e440 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt;0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo Phoenix 5-pin male (one input, one hardwired loop output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC (Meyer Sound MPS-488HP or MPS-482HP required); NEC Class 2 wiring approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutside Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e12.64 in (321.0 mm) diameter; 8.87 in (225.3 mm) depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCutout Diameter Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e11.42 – 11.83 in (290.0 – 300.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e13.8 lb (6.26 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eZinc-plated steel-back can and UL 94 V-0 rated baffle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFire Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUL 2043 for air-handling spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound Ashby-8C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eQSC AcousticDesign AD-C8T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eJBL Control 26C\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSelf-powered with onboard Class-D amplifier and DSP via IntelligentDC.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external amplifier and 70\/100 V transformer or low-impedance drive.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external amplifier and typically 70\/100 V distribution.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8-inch cone driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8-inch cone driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e6.5-inch cone driver.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOnboard Processing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIntegrated DSP delivers flat frequency and phase response from the factory.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo onboard DSP; processing handled by external amplifier or processor.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo onboard DSP; processing handled externally.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° conical.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eConical coverage in a comparable wide-angle pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWide conical coverage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSingle composite cable carries balanced audio and 48 V DC under NEC Class 2.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpeaker-level cabling from a distributed amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpeaker-level cabling from a distributed amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePlenum Fire Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUL 2043 rated back-can for air-handling spaces.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePlenum-rated back-can available.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOptional plenum back-can.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Ashby-8C require a separate amplifier?\u003c\/strong\u003e\u003cbr\u003eNo. The Ashby-8C is self-powered with an onboard Class-D amplifier, but it does require a Meyer Sound MPS-488HP or MPS-482HP IntelligentDC power supply to deliver 48 V DC and balanced audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many Ashby-8C units can one power supply drive?\u003c\/strong\u003e\u003cbr\u003eOne MPS-488HP can power up to 16 Ashby-8C loudspeakers (2 per channel), and one MPS-482HP can power up to 4 Ashby-8C loudspeakers (2 per channel).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Ashby-8C be installed in a plenum ceiling?\u003c\/strong\u003e\u003cbr\u003eYes. The zinc-plated steel back-can is fire-rated to UL 2043 for installation in air-handling spaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the no-ATTN designation mean?\u003c\/strong\u003e\u003cbr\u003eThis configuration ships without an onboard attenuator, which is appropriate when output level is set upstream at the source or processor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this product covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45925417451756,"sku":"09.260.001.01","price":1980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black-creation-networks-58795.webp?v=1757941512"},{"product_id":"meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-white","title":"Meyer Sound Ashby-8C-8\" In-Ceiling Active Speaker with ATTN (White) - 09.260.001.03","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound Ashby-8C is a self-powered 8-inch in-ceiling loudspeaker built for distributed audio systems that demand accurate music reproduction and high speech intelligibility. Engineered on Meyer Sound's IntelligentDC platform, it delivers a deeper low end and higher SPL than most in-ceiling loudspeakers of comparable size. A smooth, consistent 100° conical coverage pattern lets fewer units cover a larger area, reducing system count and cost. This white-finish model includes an onboard attenuator (ATTN) for local level adjustment during commissioning.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black-creation-networks-58795.webp?v=1757941512\" alt=\"Meyer Sound Ashby-8C 8-inch in-ceiling active loudspeaker with attenuator\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ashby-8C pairs onboard Class-D amplification with sophisticated signal processing to deliver the flat frequency and phase response characteristic of Meyer Sound loudspeakers. A 0.75-inch metal-dome tweeter is mounted concentrically over an 8-inch cone driver in a coaxial layout that maximizes wave-guide surface for even directivity. Balanced audio and 48 V DC power arrive over a single composite cable from a Meyer Sound MPS IntelligentDC power supply, enabling long, light-gauge cable runs without conduit under NEC Class 2 wiring. The zinc-plated steel back-can is fire-rated for air-handling plenum spaces, and the low-profile perforated steel grille blends discreetly into finished ceilings. For smaller rooms or tighter loudspeaker spacing, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-5c-5-5-active-speaker-with-attn\"\u003eMeyer Sound Ashby-5C\u003c\/a\u003e provides the same IntelligentDC architecture in a 5-inch format, and the broader range is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. This unit is the white, attenuator-equipped configuration.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard Attenuator\u003c\/strong\u003e — An integrated ATTN control allows local output level adjustment at the loudspeaker during system commissioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard Class-D amplification with a total output power of 440 W peak eliminates external amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Transducer\u003c\/strong\u003e — A 0.75-inch dome tweeter mounted concentrically over an 8-inch cone driver delivers point-source coherence across the coverage area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Conical Coverage\u003c\/strong\u003e — A consistent 100° conical pattern allows fewer loudspeakers to cover a larger floor area at even level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh SPL-to-Size Ratio\u003c\/strong\u003e — Linear peak SPL reaches 114 dB with 19 dB crest factor (M-noise) from a compact enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Power and Audio\u003c\/strong\u003e — Balanced audio and 48 V DC power travel over a single composite cable from an MPS power supply, supporting long, light-gauge runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlenum-Rated Enclosure\u003c\/strong\u003e — The zinc-plated steel back-can is fire-rated to UL 2043 for air-handling ceiling spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM are specified at less than 0.02% for clean speech and music reproduction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference rooms and boardrooms requiring high-quality distributed program and voice reproduction\u003c\/li\u003e\n\u003cli\u003eHouse of worship sanctuaries and multi-purpose rooms needing wide, even ceiling coverage\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces and all-hands rooms with distributed audio and paging\u003c\/li\u003e\n\u003cli\u003eTraining rooms and government spaces where intelligible speech is critical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e60 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e67 Hz – 16 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e190 Hz – 16 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e114 dB with 19 dB crest factor (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° conical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 8-inch cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 0.75-inch dome tweeter mounted concentrically in wave guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHigh-efficiency, Class-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e440 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt;0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo Phoenix 5-pin male (one input, one hardwired loop output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC (Meyer Sound MPS-488HP or MPS-482HP required); NEC Class 2 wiring approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutside Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e12.64 in (321.0 mm) diameter; 8.87 in (225.3 mm) depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCutout Diameter Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e11.42 – 11.83 in (290.0 – 300.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e13.8 lb (6.26 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eZinc-plated steel-back can and UL 94 V-0 rated baffle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFire Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUL 2043 for air-handling spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound Ashby-8C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eQSC AcousticDesign AD-C8T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eJBL Control 26C\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSelf-powered with onboard Class-D amplifier and DSP via IntelligentDC.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external amplifier and 70\/100 V transformer or low-impedance drive.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external amplifier and typically 70\/100 V distribution.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8-inch cone driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8-inch cone driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e6.5-inch cone driver.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOnboard Processing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIntegrated DSP delivers flat frequency and phase response from the factory.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo onboard DSP; processing handled by external amplifier or processor.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo onboard DSP; processing handled externally.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° conical.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eConical coverage in a comparable wide-angle pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWide conical coverage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSingle composite cable carries balanced audio and 48 V DC under NEC Class 2.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpeaker-level cabling from a distributed amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpeaker-level cabling from a distributed amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePlenum Fire Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUL 2043 rated back-can for air-handling spaces.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePlenum-rated back-can available.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOptional plenum back-can.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the ATTN designation mean?\u003c\/strong\u003e\u003cbr\u003eThis configuration includes an onboard attenuator that allows the installer to set the output level locally at the loudspeaker, which is useful when balancing zones during commissioning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Ashby-8C require a separate amplifier?\u003c\/strong\u003e\u003cbr\u003eNo. The Ashby-8C is self-powered, but it requires a Meyer Sound MPS-488HP or MPS-482HP IntelligentDC power supply to deliver 48 V DC and balanced audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many Ashby-8C units can one power supply drive?\u003c\/strong\u003e\u003cbr\u003eOne MPS-488HP can power up to 16 Ashby-8C loudspeakers (2 per channel), and one MPS-482HP can power up to 4 Ashby-8C loudspeakers (2 per channel).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Ashby-8C be installed in a plenum ceiling?\u003c\/strong\u003e\u003cbr\u003eYes. The zinc-plated steel back-can is fire-rated to UL 2043 for installation in air-handling spaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this product covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45925640536300,"sku":"09.260.001.03","price":2060.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black-creation-networks-58795.webp?v=1757941512"},{"product_id":"meyer-sound-up-4slim-2x4-3-way-active-speaker-m8-5-pin-input","title":"Meyer Sound UP-4Slim 2x4\" 3-Way Active Speaker, M8, 5-Pin Input - 09.274.001.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound UP-4slim is an ultracompact, self-powered installation loudspeaker built around a slim aluminum enclosure that integrates discreetly into architectural spaces. It uses IntelligentDC technology to receive 48 V DC power and balanced audio over a single Phoenix 5-pin connector, eliminating AC conduit while preserving self-powered performance. Three channels of class D amplification drive two 4-inch cone transducers and a 1-inch metal dome tweeter for high SPL, low distortion, and uniform 100° by 100° coverage. It is well suited to vocal reinforcement, frontfill, and under-balcony fill where an aesthetically refined cabinet is required.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-up-4slim-2x4-3-way-active-speaker-m8-5-pin-input-creation-networks-50429.webp?v=1757946003\" alt=\"Meyer Sound UP-4slim 2x4 inch three-way IntelligentDC installation loudspeaker\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe UP-4slim pairs two 4-inch low-frequency cone drivers with a 1-inch metal dome tweeter on a constant-directivity horn, with the woofers working in parallel at low frequencies and one rolling off higher up to maintain constant directivity through the crossover region. A three-channel class D amplifier with integral digital signal processing provides the flat frequency and phase response characteristic of Meyer Sound IntelligentDC loudspeakers, delivering a 65 Hz to 18 kHz operating range and 116.5 dB linear peak SPL. Its amplifier stores DC power and tolerates voltage drops, allowing composite cables such as Belden 1502 to carry both power and audio up to 150 feet with about 1 dB of peak SPL loss using 18 AWG wire. The UP-4slim requires a Meyer Sound IntelligentDC external power supply such as the MPS-482HP or MPS-488X, and a single MM-10ACX can also power one unit. For a wider-coverage two-way alternative, see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-upm-1xp-2x5-active-speaker-3-pin-input-phx-5\"\u003eMeyer Sound UPM-1XP\u003c\/a\u003e, and add the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-750-lfc-3100w-15-inch-powered-subwoofer\"\u003eMeyer Sound 750-LFC subwoofer\u003c\/a\u003e for full-range output. Explore the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim Aluminum Enclosure\u003c\/strong\u003e — The box-shaped aluminum cabinet measures just 4.29 inches wide and weighs 14 lb for discreet integration into architectural environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Technology\u003c\/strong\u003e — A single Phoenix 5-pin cable delivers both 48 V DC power and balanced audio, removing the need for AC conduit at each loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Channel Amplification\u003c\/strong\u003e — An integrated class D amplifier with 500 W peak output and advanced digital signal processing drives each transducer on its own channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 4-Inch Drivers and Metal Dome Tweeter\u003c\/strong\u003e — Two 4-inch cone transducers and a 1-inch metal dome tweeter deliver a smooth, wide-band response with low distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant-Directivity Crossover\u003c\/strong\u003e — A unique crossover design rolls one woofer off at higher frequencies to eliminate comb filtering and maintain consistent directivity through the crossover region.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Symmetrical Coverage\u003c\/strong\u003e — Matched 100° horizontal and 100° vertical coverage allows fewer loudspeakers to cover larger areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Cable Runs\u003c\/strong\u003e — The amplifier tolerates voltage drops, supporting light-gauge cabling and runs up to 150 feet with minimal SPL loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM8 Rigging Points\u003c\/strong\u003e — Top and bottom aluminum plates with M8 threads accept the optional MUB-UP-4slim bracket and MYA-UP-4slim yoke.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Provides clear vocal reinforcement and frontfill from a slim, visually unobtrusive cabinet in sanctuaries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Serves as frontfill or under-balcony fill to maintain intelligibility in seating not covered by the main system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference Room\u003c\/strong\u003e — Delivers uniform speech reinforcement and program audio from a compact, architecturally discreet loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Supports installed audio and voice reinforcement where a low-profile, low-distortion loudspeaker is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e65 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e70 Hz – 18 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e102 Hz – 18 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e116.5 dB with crest factor \u0026gt;16.5 dB (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° horizontal x 100° vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 4-inch cone drivers; 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 1-inch metal dome tweeter; 8 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3-channel, class D with integral digital signal processing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e500 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhoenix 5-pin male (two pins DC power, three pins balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDC Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC; Meyer Sound IntelligentDC external power supply required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eW: 4.29 in (109 mm) x H: 15.90 in (404 mm) x D: 5.69 in (144 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e14 lb (6.35 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAluminum with slightly textured black finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRigging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTop and bottom aluminum plates with M8 threads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriteria\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound UP-4slim\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eL-Acoustics 5XT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ed\u0026amp;b E4\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAmplification\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe UP-4slim is self-powered with a three-channel class D amplifier integrated into the cabinet.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe 5XT is a passive coaxial loudspeaker requiring an external L-Acoustics amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe E4 is a passive loudspeaker driven by an external d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDriver Configuration\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses two 4-inch cone drivers and a 1-inch metal dome tweeter in a three-way design.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a single 5-inch coaxial transducer.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt uses a 4-inch driver with a 0.75-inch high-frequency exit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePower and Audio Delivery\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIntelligentDC carries 48 V DC power and balanced audio over a single cable.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt connects via speaker-level cabling from the controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt connects via speaker-level cabling from the amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCoverage Pattern\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt provides symmetrical 100° by 100° coverage.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt offers a nominal 110° conical coverage.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIt offers a nominal 90° rotatable horn pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe slim aluminum cabinet is 4.29 inches wide for discreet architectural integration.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe compact polymer enclosure is wider relative to its coaxial driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eThe molded enclosure is compact but not designed as an ultra-slim profile.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOnboard Processing\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEqualization, phase correction, and driver protection are built into the loudspeaker.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eProcessing is handled externally in the amplified controller.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eProcessing resides in the external d\u0026amp;b amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the UP-4slim need a separate power supply?\u003c\/strong\u003e\u003cbr\u003eYes. It requires a Meyer Sound IntelligentDC external power supply such as the MPS-482HP or MPS-488X; a single MM-10ACX can also power one UP-4slim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connector does it use?\u003c\/strong\u003e\u003cbr\u003eIt uses a Phoenix 5-pin male connector that carries both 48 V DC power and balanced audio over a single cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow small is the enclosure?\u003c\/strong\u003e\u003cbr\u003eThe aluminum cabinet measures 4.29 inches wide by 15.90 inches tall by 5.69 inches deep and weighs 14 lb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be extended to full range?\u003c\/strong\u003e\u003cbr\u003eYes. Pairing the UP-4slim with a Meyer Sound subwoofer such as the 750-LFC adds low-frequency extension for a full-range system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact Creation Networks\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942186377452,"sku":"09.274.001.01","price":3560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-up-4slim-2x4-3-way-active-speaker-m8-5-pin-input-creation-networks-50429.webp?v=1757946003"},{"product_id":"meyer-sound-mya-up-4slim-yoke-kit","title":"Meyer Sound MYA-UP-4slim Yoke Kit -40.274.039.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MYA-UP-4slim is a cradle-style mounting yoke kit that suspends a single UP-4slim loudspeaker from one point. It provides secure single-point suspension with adjustment for precise aiming after installation. The yoke can also be mounted onto a 35 mm pole using the optional MSA-STAND Adapter Cup to facilitate easy panning and tilting. It is the dedicated suspension accessory for the UP-4slim loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mya-up-4slim-yoke-kit-creation-networks-78436.jpg?v=1757941478\" alt=\"Meyer Sound MYA-UP-4slim cradle-style mounting yoke kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MYA-UP-4slim cradles the slim UP-4slim cabinet between two arms that attach to its M8 rigging points, enabling single-point suspension from a ceiling or other overhead structure. Its adjustment range allows the loudspeaker to be aimed toward a defined listening area, making it suitable for fixed installations and portable applications alike. When paired with the optional MSA-STAND Adapter Cup, the yoke can be mounted onto a 35 mm pole to allow convenient panning and tilting on a stand. This accessory is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-up-4slim-2x4-3-way-active-speaker-m8-5-pin-input\"\u003eMeyer Sound UP-4slim\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCradle-Style Yoke\u003c\/strong\u003e — Suspends a single UP-4slim loudspeaker from one point for secure overhead mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM8 Rigging Attachment\u003c\/strong\u003e — Attaches to the UP-4slim's top and bottom M8 rigging points for a stable connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Aiming\u003c\/strong\u003e — Supports horizontal and vertical adjustment for precise loudspeaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePole-Mount Compatible\u003c\/strong\u003e — Can be mounted on a 35 mm pole using the optional MSA-STAND Adapter Cup for panning and tilting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUP-4slim Specific\u003c\/strong\u003e — Designed exclusively for the UP-4slim ultracompact installation loudspeaker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCradle-style mounting yoke kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUP-4slim loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSingle-point suspension via M8 rigging points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePole Mount\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCompatible with 35 mm pole via optional MSA-STAND Adapter Cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942192144620,"sku":"40.274.039.01","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mya-up-4slim-yoke-kit-creation-networks-78436.jpg?v=1757941478"},{"product_id":"meyer-sound-mub-up-4slim-kit","title":"Meyer Sound MUB-UP-4slim Kit - 40.274.969.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MUB-UP-4slim is a U-shaped mounting bracket kit that accommodates mounting of the UP-4slim loudspeaker on a ceiling, wall, or floor at any angle. The U-bracket cradles the slim cabinet between two arms and secures to its M8 rigging points, providing a rigid, fixed-position mount. Its flexible angular adjustment makes it suitable for a wide range of installation conditions. It is the dedicated bracket accessory for the UP-4slim loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mub-up-4slim-kit-creation-networks-27014.jpg?v=1757941478\" alt=\"Meyer Sound MUB-UP-4slim U-bracket mounting kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MUB-UP-4slim U-bracket holds the loudspeaker securely between two arms that attach to the cabinet's M8 rigging points, allowing the unit to be tilted to any angle and locked into position. It supports mounting on a ceiling, wall, or floor, giving installers broad flexibility for permanent installations where a fixed mount is preferred over a suspended yoke. The bracket's compact form factor complements the slim profile of the UP-4slim for discreet architectural integration. This accessory is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-up-4slim-2x4-3-way-active-speaker-m8-5-pin-input\"\u003eMeyer Sound UP-4slim\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e at Creation Networks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eU-Bracket Design\u003c\/strong\u003e — Cradles the UP-4slim cabinet between two arms for a rigid, fixed-position mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAny-Angle Mounting\u003c\/strong\u003e — Accommodates mounting on a ceiling, wall, or floor at any angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM8 Rigging Attachment\u003c\/strong\u003e — Secures to the UP-4slim's M8 rigging points for a stable connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor\u003c\/strong\u003e — Complements the slim profile of the UP-4slim for discreet installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUP-4slim Specific\u003c\/strong\u003e — Designed exclusively for the UP-4slim ultracompact installation loudspeaker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eU-shaped mounting bracket kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUP-4slim loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMounting Surfaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCeiling, wall, or floor at any angle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAttachment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eM8 rigging points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942195585260,"sku":"40.274.969.01","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mub-up-4slim-kit-creation-networks-27014.jpg?v=1757941478"},{"product_id":"meyer-sound-mm-4xp-4-active-speaker-3-pin-input-black","title":"Meyer Sound MM-4XP 4\" Active Speaker, 3-Pin Input (Black) - 09.163.020.11","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MM-4XP is a self-powered miniature loudspeaker engineered for high-quality distributed sound systems where space and visibility are constrained. Its compact 4-inch design makes it well suited to fill and spot coverage, hidden installation locations, and front-fill duties in houses of worship, theatrical venues, and corporate AV environments. Using Meyer Sound IntelligentDC technology, the MM-4XP receives both 48 V DC power and balanced audio over a single cable for clean, low-noise distribution. This black-finish model delivers the flat frequency and phase response characteristic of Meyer Sound point source loudspeakers.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-black-creation-networks-63684.jpg?v=1757941480\" alt=\"Meyer Sound MM-4XP 4-inch active loudspeaker in black finish\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eHoused in a sealed extruded aluminum enclosure that doubles as a heat sink, the MM-4XP integrates a proprietary 4-inch cone transducer with onboard Class-D amplification and signal processing manufactured at Meyer Sound's Berkeley, California facility. The loudspeaker produces a linear peak SPL of 111.5 dB with an operating frequency range of 120 Hz to 18 kHz and very low distortion, reproducing both speech and music with high intelligibility. Power and balanced audio arrive through a single SwitchCraft EN3 5-pin male connector, and the amplifier circuitry stores DC power and tolerates voltage drops to support long cable runs on light-gauge wiring. The MM-4XP requires a Meyer Sound IntelligentDC power supply such as the MPS-482HP or MPS-488HP. For mounting, pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-universal-mub-mm-4xp-kit-black\"\u003eUniversal MUB MM-4XP bracket kit\u003c\/a\u003e, and explore additional Meyer Sound loudspeakers in our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. For installations requiring a directional pattern in reverberant rooms, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xpd-black-directional-miniature-self-powered-loudspeaker-en-3-global\"\u003eMM-4XPD directional version\u003c\/a\u003e is also available.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard Class-D amplification and signal processing eliminate the need for external amplifiers in distributed loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Technology\u003c\/strong\u003e — A single SwitchCraft EN3 5-pin connection carries both 48 V DC power and balanced audio for clean, low-noise distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Aluminum Enclosure\u003c\/strong\u003e — The sealed extruded aluminum cabinet measures just 4.04 inches square and acts as a heat sink for the driver voice coil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Range Response\u003c\/strong\u003e — A 120 Hz to 18 kHz operating frequency range with flat phase response reproduces speech and music with high intelligibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh SPL-to-Size Ratio\u003c\/strong\u003e — The 4-inch transducer delivers a linear peak SPL of 111.5 dB despite its miniature footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Cable Run Support\u003c\/strong\u003e — Stored DC power and voltage-drop tolerance accommodate runs up to 300 feet on 18 AWG wire with just 1 dB of SPL loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting\u003c\/strong\u003e — Two 3\/8-inch-16 side inserts and the optional MUB-MM4XP U-bracket allow wall and ceiling installation at adjustable angles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Discreet front-fill and spot coverage for chancel steps and sightline-sensitive sanctuary locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial Meeting Space\u003c\/strong\u003e — Compact, high-intelligibility reinforcement for corporate AV and presentation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Distributed coverage for flexible spaces requiring even speech and music reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Stage-lip front-fill and supplemental coverage where loudspeaker visibility must be minimized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e120 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e135 Hz – 17 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e400 Hz – 20 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e111.5 dB with crest factor \u0026gt;16.5 dB (M-noise); 109 dB (Pink noise); 111 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80° (3 kHz – 14 kHz ±10°); 120° (below 2 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eVertical Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80° (3 kHz – 14 kHz ±10°); 120° (below 2 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTransducer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 4-inch cone driver; 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass-D; 440 W peak total output power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 5-pin male (2 pins 48 V DC power, 3 pins balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSafety Agency Rated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e4.04 in (103 mm) x 4.04 in (103 mm) x 5.72 in (145 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e4.2 lb (1.9 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSealed extruded aluminum, black-anodized finish; perforated steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 3\/8-inch-16 side inserts; optional MUB-MM4XP U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the MM-4XP require a separate power supply?\u003c\/strong\u003e\u003cbr\u003eYes. The MM-4XP is a self-powered loudspeaker that requires a Meyer Sound IntelligentDC external power supply, such as the MPS-482HP or MPS-488HP, to deliver 48 V DC power and balanced audio over the EN3 connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long can the cable runs be?\u003c\/strong\u003e\u003cbr\u003eMeyer Sound power supplies can deliver DC power to the MM-4XP at cable lengths up to 300 feet with just 1 dB of peak SPL loss using 18 AWG wire. Heavier gauge wiring allows longer runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of input connector does it use?\u003c\/strong\u003e\u003cbr\u003eThe MM-4XP uses a single SwitchCraft EN3 5-pin male connector that carries both 48 V DC power (two pins) and balanced audio (three pins).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the MM-4XP mounted?\u003c\/strong\u003e\u003cbr\u003eIt includes two 3\/8-inch-16 side inserts and accepts the optional MUB-MM4XP U-bracket for wall and ceiling mounting at adjustable angles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the MM-4XP covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. This product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942200238316,"sku":"09.163.020.11","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-black-creation-networks-63684.jpg?v=1757941480"},{"product_id":"meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white","title":"Meyer Sound MM-4XP 4\" Active Speaker, 3-Pin Input (White) - 09.163.020.12","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MM-4XP is a self-powered miniature loudspeaker built for high-quality distributed sound systems where space and visibility are limited. Its compact 4-inch design suits fill and spot coverage, hidden installation locations, and front-fill duties in houses of worship, theatrical venues, and corporate AV environments. Using Meyer Sound IntelligentDC technology, the MM-4XP receives both 48 V DC power and balanced audio over a single cable for clean, low-noise distribution. This white-finish model blends into light-colored architectural surfaces while delivering the flat frequency and phase response characteristic of Meyer Sound point source loudspeakers.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white-creation-networks-62620.png?v=1757941504\" alt=\"Meyer Sound MM-4XP 4-inch active loudspeaker in white finish\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eHoused in a sealed extruded aluminum enclosure that doubles as a heat sink, the MM-4XP integrates a proprietary 4-inch cone transducer with onboard Class-D amplification and signal processing manufactured at Meyer Sound's Berkeley, California facility. The loudspeaker produces a linear peak SPL of 111.5 dB with an operating frequency range of 120 Hz to 18 kHz and very low distortion, reproducing both speech and music with high intelligibility. Power and balanced audio arrive through a single SwitchCraft EN3 5-pin male connector, and the amplifier circuitry stores DC power and tolerates voltage drops to support long cable runs on light-gauge wiring. The MM-4XP requires a Meyer Sound IntelligentDC power supply such as the MPS-482HP or MPS-488HP. For mounting, pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-universal-mub-mm-4xp-kit-white\"\u003eUniversal MUB MM-4XP bracket kit in white\u003c\/a\u003e, and explore additional Meyer Sound loudspeakers in our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. For installations requiring a directional pattern in reverberant rooms, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xpd-black-directional-miniature-self-powered-loudspeaker-en-3-global\"\u003eMM-4XPD directional version\u003c\/a\u003e is also available.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard Class-D amplification and signal processing eliminate the need for external amplifiers in distributed loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Technology\u003c\/strong\u003e — A single SwitchCraft EN3 5-pin connection carries both 48 V DC power and balanced audio for clean, low-noise distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Architectural Finish\u003c\/strong\u003e — The white-painted sealed aluminum enclosure blends into light walls and ceilings in visibility-sensitive installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Range Response\u003c\/strong\u003e — A 120 Hz to 18 kHz operating frequency range with flat phase response reproduces speech and music with high intelligibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh SPL-to-Size Ratio\u003c\/strong\u003e — The 4-inch transducer delivers a linear peak SPL of 111.5 dB despite its miniature footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Cable Run Support\u003c\/strong\u003e — Stored DC power and voltage-drop tolerance accommodate runs up to 300 feet on 18 AWG wire with just 1 dB of SPL loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting\u003c\/strong\u003e — Two 3\/8-inch-16 side inserts and the optional MUB-MM4XP U-bracket allow wall and ceiling installation at adjustable angles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Discreet front-fill and spot coverage for chancel steps and sightline-sensitive sanctuary locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial Meeting Space\u003c\/strong\u003e — Compact, high-intelligibility reinforcement for corporate AV and presentation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Distributed coverage for flexible spaces requiring even speech and music reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Stage-lip front-fill and supplemental coverage where loudspeaker visibility must be minimized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e120 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e135 Hz – 17 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e400 Hz – 20 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e111.5 dB with crest factor \u0026gt;16.5 dB (M-noise); 109 dB (Pink noise); 111 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80° (3 kHz – 14 kHz ±10°); 120° (below 2 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eVertical Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e80° (3 kHz – 14 kHz ±10°); 120° (below 2 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTransducer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 4-inch cone driver; 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass-D; 440 W peak total output power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 5-pin male (2 pins 48 V DC power, 3 pins balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSafety Agency Rated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e4.04 in (103 mm) x 4.04 in (103 mm) x 5.72 in (145 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e4.2 lb (1.9 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSealed extruded aluminum, white-painted finish; perforated steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 3\/8-inch-16 side inserts; optional MUB-MM4XP U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the MM-4XP require a separate power supply?\u003c\/strong\u003e\u003cbr\u003eYes. The MM-4XP is a self-powered loudspeaker that requires a Meyer Sound IntelligentDC external power supply, such as the MPS-482HP or MPS-488HP, to deliver 48 V DC power and balanced audio over the EN3 connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long can the cable runs be?\u003c\/strong\u003e\u003cbr\u003eMeyer Sound power supplies can deliver DC power to the MM-4XP at cable lengths up to 300 feet with just 1 dB of peak SPL loss using 18 AWG wire. Heavier gauge wiring allows longer runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of input connector does it use?\u003c\/strong\u003e\u003cbr\u003eThe MM-4XP uses a single SwitchCraft EN3 5-pin male connector that carries both 48 V DC power (two pins) and balanced audio (three pins).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the MM-4XP mounted?\u003c\/strong\u003e\u003cbr\u003eIt includes two 3\/8-inch-16 side inserts and accepts the optional MUB-MM4XP U-bracket for wall and ceiling mounting at adjustable angles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the MM-4XP covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. This product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942204137708,"sku":"09.163.020.12","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white-creation-networks-62620.png?v=1757941504"},{"product_id":"meyer-sound-mm-4xpd-black-directional-miniature-self-powered-loudspeaker-en-3-global","title":"Meyer Sound MM-4XPD Directional Miniature Self-Powered Loudspeaker, EN-3 (Black, Global)  - 09.204.001.03","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MM-4XPD is a directional miniature self-powered loudspeaker designed for high-quality distributed sound systems in reverberant spaces. Its hypercardioid polar pattern significantly reduces room excitation and improves intelligibility, making it well suited to houses of worship, auditoriums, museums, and reverberant commercial meeting spaces. Like the standard MM-4XP, it uses Meyer Sound IntelligentDC technology to receive both 48 V DC power and balanced audio over a single cable. This global black-finish model delivers Meyer Sound's signature flat frequency and phase response with the added benefit of controlled directivity.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-4xpd-directional-miniature-self-powered-loudspeaker-en-3-black-global-creation-networks-64806.jpg?v=1757941506\" alt=\"Meyer Sound MM-4XPD directional miniature self-powered loudspeaker in black\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MM-4XPD meets the same performance standards as the MM-4XP while adding a patented passive directional design. Using a single 4-inch cone transducer, the loudspeaker achieves a hypercardioid pattern that yields 10 dB of attenuation between the front and rear even at low frequencies, all without the cost and complexity of multi-driver directional techniques. It delivers a linear peak SPL of 111.5 dB across an operating frequency range of 120 Hz to 18 kHz with very low distortion. Power and balanced audio arrive through a single SwitchCraft EN3 5-pin male connector, and the amplifier stores DC power and tolerates voltage drops to support long, light-gauge cable runs. The MM-4XPD requires a Meyer Sound IntelligentDC power supply such as the MPS-482HP or MPS-488HP. Pair it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-universal-mub-mm-4xp-kit-black\"\u003eUniversal MUB MM-4XP bracket kit\u003c\/a\u003e for mounting, and for non-directional fill applications consider the standard \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMM-4XP loudspeaker\u003c\/a\u003e. Explore the full range in our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Hypercardioid Pattern\u003c\/strong\u003e — Provides 10 dB of front-to-back attenuation even at low frequencies to control directivity where it is hardest to achieve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Room Excitation\u003c\/strong\u003e — The directional pattern minimizes reflected energy, improving intelligibility in highly reverberant spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Driver Directional Technology\u003c\/strong\u003e — Patented passive design achieves directivity with one transducer, minimizing energy consumption, weight, and cabinet volume.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Technology\u003c\/strong\u003e — A single SwitchCraft EN3 5-pin connection carries both 48 V DC power and balanced audio for low-noise distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Range Response\u003c\/strong\u003e — A 120 Hz to 18 kHz operating frequency range reproduces both speech and music with high intelligibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh SPL-to-Size Ratio\u003c\/strong\u003e — The 4-inch transducer delivers a linear peak SPL of 111.5 dB from a compact aluminum enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting\u003c\/strong\u003e — Two 3\/8-inch-16 side inserts and the optional MUB-MM4XPD U-bracket allow wall and ceiling installation at adjustable angles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Directional coverage that improves speech intelligibility in reverberant sanctuaries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Distributed reinforcement in acoustically live rooms where room excitation must be controlled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial Meeting Space\u003c\/strong\u003e — High-intelligibility coverage for reverberant corporate and presentation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Even, directional sound for flexible spaces with challenging acoustics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e120 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e135 Hz – 17 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e330 Hz – 20 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e111.5 dB with crest factor \u0026gt;16.5 dB (M-noise); 109 dB (Pink noise); 111 dB (B-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHypercardioid with \u0026lt;10 dB front-to-back ratio up to 500 Hz; 120° (500 Hz – 4 kHz); 80° (4 kHz – 10 kHz ±10°)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTransducer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 4-inch cone driver; 4 Ω nominal impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eClass-D; 440 W peak total output power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt; 0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 5-pin male (2 pins 48 V DC power, 3 pins balanced audio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eIdle Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e0.16 A rms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eBurst Current (\u0026lt;1 sec)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e2.2 A rms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eInrush Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt;7.0 A peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSafety Agency Rated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e4.04 in (103 mm) x 4.04 in (103 mm) x 7.95 in (202 mm); 10.20 in (259 mm) D with connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e5.2 lb (2.4 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eExtruded aluminum, black-anodized finish; perforated steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo 3\/8-inch-16 side inserts; optional MUB-MM4XPD U-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the MM-4XPD differ from the standard MM-4XP?\u003c\/strong\u003e\u003cbr\u003eThe MM-4XPD adds a patented passive hypercardioid directional pattern that delivers 10 dB of front-to-back attenuation even at low frequencies, reducing room excitation in reverberant spaces while otherwise matching the MM-4XP's performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the MM-4XPD require a separate power supply?\u003c\/strong\u003e\u003cbr\u003eYes. It is a self-powered loudspeaker requiring a Meyer Sound IntelligentDC external power supply such as the MPS-482HP or MPS-488HP to deliver 48 V DC power and balanced audio over the EN3 connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long can the cable runs be?\u003c\/strong\u003e\u003cbr\u003eMeyer Sound power supplies can deliver DC power to the MM-4XPD at cable lengths up to 300 feet with just 1 dB of peak SPL loss using 18 AWG wire. Heavier gauge wiring allows longer runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connector does the MM-4XPD use?\u003c\/strong\u003e\u003cbr\u003eIt uses a single SwitchCraft EN3 5-pin male connector carrying both 48 V DC power (two pins) and balanced audio (three pins).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the MM-4XPD covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. This product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942206169324,"sku":"09.204.001.03","price":1530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mm-4xpd-directional-miniature-self-powered-loudspeaker-en-3-black-global-creation-networks-64806.jpg?v=1757941506"},{"product_id":"meyer-sound-universal-mub-mm-4xp-kit-black","title":"Meyer Sound UNIVERSAL MUB MM-4XP Kit (Black) - 40.163.203.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound Universal MUB MM-4XP Kit is the optional mounting U-bracket for the MM-4XP miniature loudspeaker. It allows the loudspeaker to be mounted on walls, ceilings, and other flat surfaces at adjustable angles, with all required mounting hardware included. This black-finish kit matches the black-anodized MM-4XP enclosure for visually consistent installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-universal-mub-mm-4xp-kit-black-creation-networks-64554.jpg?v=1757941507\" alt=\"Meyer Sound Universal MUB MM-4XP mounting U-bracket kit in black\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MUB-MM4XP U-bracket secures to the two 3\/8-inch-16 inserts on the sides of the MM-4XP enclosure, providing adjustable aiming for fill, spot, and front-fill placement. The bracket is designed for permanent installation on flat surfaces and ships with the necessary mounting hardware. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-black\"\u003eMeyer Sound MM-4XP loudspeaker\u003c\/a\u003e and the directional \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xpd-black-directional-miniature-self-powered-loudspeaker-en-3-global\"\u003eMM-4XPD\u003c\/a\u003e. For more Meyer Sound loudspeakers and accessories, browse our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Aiming\u003c\/strong\u003e — Allows the MM-4XP to be mounted at adjustable angles for precise coverage on walls and ceilings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/8-Inch-16 Attachment\u003c\/strong\u003e — Secures to the loudspeaker's two side inserts for a stable mechanical connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included\u003c\/strong\u003e — Ships with the mounting hardware required for installation on flat surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Finish\u003c\/strong\u003e — Color-matched to the black-anodized MM-4XP enclosure for a consistent appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMounting U-bracket kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAttachment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3\/8-inch-16 side inserts on the MM-4XP enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAdjustability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAdjustable mounting angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHardware\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMounting hardware included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound MM-4XP and MM-4XPD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942213116140,"sku":"40.163.203.02","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-universal-mub-mm-4xp-kit-black-creation-networks-64554.jpg?v=1757941507"},{"product_id":"meyer-sound-universal-mub-mm-4xp-kit-white","title":"Meyer Sound UNIVERSAL MUB MM-4XP Kit (White) - 40.163.203.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound Universal MUB MM-4XP Kit is the optional mounting U-bracket for the MM-4XP miniature loudspeaker. It allows the loudspeaker to be mounted on walls, ceilings, and other flat surfaces at adjustable angles, with all required mounting hardware included. This white-finish kit matches the white-painted MM-4XP enclosure for visually discreet installations on light-colored surfaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-universal-mub-mm-4xp-kit-white-creation-networks-65755.webp?v=1757941508\" alt=\"Meyer Sound Universal MUB MM-4XP mounting U-bracket kit in white\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MUB-MM4XP U-bracket secures to the two 3\/8-inch-16 inserts on the sides of the MM-4XP enclosure, providing adjustable aiming for fill, spot, and front-fill placement. The bracket is designed for permanent installation on flat surfaces and ships with the necessary mounting hardware. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP loudspeaker\u003c\/a\u003e in white. For more Meyer Sound loudspeakers and accessories, browse our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Aiming\u003c\/strong\u003e — Allows the MM-4XP to be mounted at adjustable angles for precise coverage on walls and ceilings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/8-Inch-16 Attachment\u003c\/strong\u003e — Secures to the loudspeaker's two side inserts for a stable mechanical connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Included\u003c\/strong\u003e — Ships with the mounting hardware required for installation on flat surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Finish\u003c\/strong\u003e — Color-matched to the white-painted MM-4XP enclosure for a discreet appearance on light surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMounting U-bracket kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAttachment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e3\/8-inch-16 side inserts on the MM-4XP enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAdjustability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAdjustable mounting angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHardware\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMounting hardware included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound MM-4XP and MM-4XPD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942289498348,"sku":"40.163.203.04","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-universal-mub-mm-4xp-kit-white-creation-networks-65755.webp?v=1757941508"},{"product_id":"meyer-sound-ashby-5c-5-5-active-speaker-with-attn","title":"Meyer Sound Ashby-5C-5 5\" Active Speaker, with no ATTN (Black) - 09.261.001.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound Ashby-5C is a self-powered 5-inch in-ceiling loudspeaker engineered for distributed audio systems that require accurate music reproduction and intelligible speech. Built on Meyer Sound's IntelligentDC platform, it pairs onboard amplification and processing with an exceptionally wide 110° conical coverage pattern. Its compact format and high SPL-to-size ratio allow it to outperform in-ceiling loudspeakers of comparable size. This black-finish model ships without an onboard attenuator (ATTN) for installations where level is managed upstream.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black-creation-networks-58795.webp?v=1757941512\" alt=\"Meyer Sound Ashby-5C 5-inch in-ceiling active loudspeaker in black\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ashby-5C combines onboard Class-D amplification with sophisticated signal processing to deliver the flat frequency and phase response for which Meyer Sound loudspeakers are known. A 0.75-inch metal-dome tweeter is mounted concentrically over a 5-inch cone driver in a coaxial configuration that maximizes the wave-guide surface for even directivity. Balanced audio and 48 V DC power are delivered over a single composite cable from a Meyer Sound MPS IntelligentDC power supply, permitting longer, lighter-gauge cable runs without conduit under NEC Class 2 wiring. The zinc-plated steel back-can is fire-rated for installation in air-handling plenum spaces, and the low-profile perforated steel grille blends discreetly into finished ceilings. When deeper low-frequency extension and higher SPL are required, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-8c-8-active-speaker-5-pin-input\"\u003eMeyer Sound Ashby-8C\u003c\/a\u003e offers an 8-inch driver on the same IntelligentDC platform, and the full range is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. This unit is the black, no-attenuator configuration.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard Class-D amplification with a total output power of 440 W peak removes the need for external amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Transducer\u003c\/strong\u003e — A 0.75-inch dome tweeter mounted concentrically over a 5-inch cone driver delivers point-source coherence across the listening area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra-Wide Coverage\u003c\/strong\u003e — A consistent 110° conical pattern lets fewer loudspeakers cover a larger floor area at even level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh SPL-to-Size Ratio\u003c\/strong\u003e — Linear peak SPL reaches 112 dB with 19 dB crest factor (M-noise) from a compact 5-inch enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Power and Audio\u003c\/strong\u003e — Balanced audio and 48 V DC power are delivered over a single composite cable from an MPS power supply, supporting long, light-gauge runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlenum-Rated Enclosure\u003c\/strong\u003e — The zinc-plated steel back-can is fire-rated to UL 2043 for installation in air-handling ceiling spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM are specified at less than 0.02% for clean reproduction of speech and music.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop-Through Wiring\u003c\/strong\u003e — A hardwired loop output allows up to three units on one power-supply channel for efficient distributed runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHuddle rooms, conference rooms, and boardrooms requiring high-quality distributed program and voice\u003c\/li\u003e\n\u003cli\u003eHouse of worship spaces and multi-purpose rooms needing wide, even ceiling coverage\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces and training rooms with distributed audio and paging\u003c\/li\u003e\n\u003cli\u003eGovernment spaces where intelligible speech is critical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e110 Hz – 16 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e290 Hz – 16 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e112 dB with 19 dB crest factor (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e110° conical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 5-inch cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 0.75-inch dome tweeter mounted concentrically in wave guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHigh-efficiency, Class-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e440 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt;0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo Phoenix 5-pin male (one input, one hardwired loop output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC (Meyer Sound MPS-482HP or MPS-488HP required); NEC Class 2 wiring approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutside Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8.92 in (226.5 mm) diameter; 7.17 in (182 mm) depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCutout Diameter Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e7.70 – 7.95 in (195.5 – 201.9 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e7.8 lb (3.53 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eZinc-plated steel-back can and UL 94 V-0 rated baffle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFire Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUL 2043 for air-handling spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound Ashby-5C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eQSC AcousticDesign AD-C6T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eJBL Control 24CT\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSelf-powered with onboard Class-D amplifier and DSP via IntelligentDC.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external amplifier and 70\/100 V transformer or low-impedance drive.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external amplifier and typically 70\/100 V distribution.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e5-inch cone driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e6.5-inch cone driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e4-inch cone driver.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOnboard Processing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIntegrated DSP delivers flat frequency and phase response from the factory.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo onboard DSP; processing handled by external amplifier or processor.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo onboard DSP; processing handled externally.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e110° conical.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWide conical coverage.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWide conical coverage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSingle composite cable carries balanced audio and 48 V DC under NEC Class 2.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpeaker-level cabling from a distributed amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpeaker-level cabling from a distributed amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePlenum Fire Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUL 2043 rated back-can for air-handling spaces.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePlenum-rated back-can available.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOptional plenum back-can.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Ashby-5C require a separate amplifier?\u003c\/strong\u003e\u003cbr\u003eNo. The Ashby-5C is self-powered with an onboard Class-D amplifier, but it does require a Meyer Sound MPS-482HP or MPS-488HP IntelligentDC power supply to deliver 48 V DC and balanced audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many Ashby-5C units can one power supply drive?\u003c\/strong\u003e\u003cbr\u003eOne MPS-488HP can power up to 24 Ashby-5C loudspeakers (3 per channel), and one MPS-482HP can power up to 6 Ashby-5C loudspeakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the Ashby-5C compare to the Ashby-8C?\u003c\/strong\u003e\u003cbr\u003eThe Ashby-5C uses a 5-inch driver with 110° coverage in a compact enclosure, while the Ashby-8C uses an 8-inch driver with 100° coverage for deeper low end and higher SPL.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Ashby-5C be installed in a plenum ceiling?\u003c\/strong\u003e\u003cbr\u003eYes. The zinc-plated steel back-can is fire-rated to UL 2043 for installation in air-handling spaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this product covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942320562412,"sku":"09.261.001.02","price":1450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black-creation-networks-58795.webp?v=1757941512"},{"product_id":"meyer-sound-ashby-5c-5-5-active-speaker-with-attn-black","title":"Meyer Sound Ashby-5C-5 5\" Active Speaker, with ATTN (Black) - 09.261.001.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound Ashby-5C is a self-powered 5-inch in-ceiling loudspeaker engineered for distributed audio systems that require accurate music reproduction and intelligible speech. Built on Meyer Sound's IntelligentDC platform, it pairs onboard amplification and processing with an exceptionally wide 110° conical coverage pattern. Its compact format and high SPL-to-size ratio allow it to outperform in-ceiling loudspeakers of comparable size. This black-finish model includes an onboard attenuator (ATTN) for local level adjustment during commissioning.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black-creation-networks-58795.webp?v=1757941512\" alt=\"Meyer Sound Ashby-5C 5-inch in-ceiling active loudspeaker in black with attenuator\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ashby-5C combines onboard Class-D amplification with sophisticated signal processing to deliver the flat frequency and phase response for which Meyer Sound loudspeakers are known. A 0.75-inch metal-dome tweeter is mounted concentrically over a 5-inch cone driver in a coaxial configuration that maximizes the wave-guide surface for even directivity. Balanced audio and 48 V DC power are delivered over a single composite cable from a Meyer Sound MPS IntelligentDC power supply, permitting longer, lighter-gauge cable runs without conduit under NEC Class 2 wiring. The zinc-plated steel back-can is fire-rated for installation in air-handling plenum spaces, and the low-profile perforated steel grille blends discreetly into finished ceilings. When deeper low-frequency extension and higher SPL are required, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-8c-8-active-speaker-5-pin-input\"\u003eMeyer Sound Ashby-8C\u003c\/a\u003e offers an 8-inch driver on the same IntelligentDC platform, and the full range is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. This unit is the black, attenuator-equipped configuration.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard Attenuator\u003c\/strong\u003e — An integrated ATTN control allows local output level adjustment at the loudspeaker during system commissioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard Class-D amplification with a total output power of 440 W peak removes the need for external amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Transducer\u003c\/strong\u003e — A 0.75-inch dome tweeter mounted concentrically over a 5-inch cone driver delivers point-source coherence across the listening area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra-Wide Coverage\u003c\/strong\u003e — A consistent 110° conical pattern lets fewer loudspeakers cover a larger floor area at even level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh SPL-to-Size Ratio\u003c\/strong\u003e — Linear peak SPL reaches 112 dB with 19 dB crest factor (M-noise) from a compact 5-inch enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Power and Audio\u003c\/strong\u003e — Balanced audio and 48 V DC power are delivered over a single composite cable from an MPS power supply, supporting long, light-gauge runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlenum-Rated Enclosure\u003c\/strong\u003e — The zinc-plated steel back-can is fire-rated to UL 2043 for installation in air-handling ceiling spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop-Through Wiring\u003c\/strong\u003e — A hardwired loop output allows up to three units on one power-supply channel for efficient distributed runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHuddle rooms, conference rooms, and boardrooms requiring high-quality distributed program and voice\u003c\/li\u003e\n\u003cli\u003eHouse of worship spaces and multi-purpose rooms needing wide, even ceiling coverage\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces and training rooms with distributed audio and paging\u003c\/li\u003e\n\u003cli\u003eGovernment spaces where intelligible speech is critical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e110 Hz – 16 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e290 Hz – 16 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e112 dB with 19 dB crest factor (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e110° conical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 5-inch cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 0.75-inch dome tweeter mounted concentrically in wave guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHigh-efficiency, Class-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e440 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt;0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo Phoenix 5-pin male (one input, one hardwired loop output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC (Meyer Sound MPS-482HP or MPS-488HP required); NEC Class 2 wiring approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutside Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8.92 in (226.5 mm) diameter; 7.17 in (182 mm) depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCutout Diameter Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e7.70 – 7.95 in (195.5 – 201.9 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e7.8 lb (3.53 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eZinc-plated steel-back can and UL 94 V-0 rated baffle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFire Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUL 2043 for air-handling spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound Ashby-5C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eQSC AcousticDesign AD-C6T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eJBL Control 24CT\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSelf-powered with onboard Class-D amplifier and DSP via IntelligentDC.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external amplifier and 70\/100 V transformer or low-impedance drive.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external amplifier and typically 70\/100 V distribution.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e5-inch cone driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e6.5-inch cone driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e4-inch cone driver.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOnboard Processing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIntegrated DSP delivers flat frequency and phase response from the factory.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo onboard DSP; processing handled by external amplifier or processor.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo onboard DSP; processing handled externally.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e110° conical.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWide conical coverage.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWide conical coverage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSingle composite cable carries balanced audio and 48 V DC under NEC Class 2.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpeaker-level cabling from a distributed amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpeaker-level cabling from a distributed amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePlenum Fire Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUL 2043 rated back-can for air-handling spaces.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePlenum-rated back-can available.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOptional plenum back-can.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the ATTN designation mean?\u003c\/strong\u003e\u003cbr\u003eThis configuration includes an onboard attenuator that allows the installer to set the output level locally at the loudspeaker, which is useful when balancing zones during commissioning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Ashby-5C require a separate amplifier?\u003c\/strong\u003e\u003cbr\u003eNo. The Ashby-5C is self-powered, but it requires a Meyer Sound MPS-482HP or MPS-488HP IntelligentDC power supply to deliver 48 V DC and balanced audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many Ashby-5C units can one power supply drive?\u003c\/strong\u003e\u003cbr\u003eOne MPS-488HP can power up to 24 Ashby-5C loudspeakers (3 per channel), and one MPS-482HP can power up to 6 Ashby-5C loudspeakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the Ashby-5C compare to the Ashby-8C?\u003c\/strong\u003e\u003cbr\u003eThe Ashby-5C uses a 5-inch driver with 110° coverage in a compact enclosure, while the Ashby-8C uses an 8-inch driver with 100° coverage for deeper low end and higher SPL.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this product covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942436888812,"sku":"09.261.001.04","price":1530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black-creation-networks-58795.webp?v=1757941512"},{"product_id":"meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-no-attn-black","title":"Meyer Sound Ashby-8C-8\" In-Ceiling Active Speaker with no ATTN (Black) - 09.260.001.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound Ashby-8C is a self-powered 8-inch in-ceiling loudspeaker engineered for distributed audio systems that demand accurate music reproduction and high speech intelligibility. Built on Meyer Sound's IntelligentDC platform, it delivers a deeper low end and higher SPL than most in-ceiling loudspeakers of comparable size. Its smooth, consistent 100° conical coverage allows fewer units to cover a larger area, reducing overall system count. This black-finish model ships without an onboard attenuator (ATTN) for installations where level is managed upstream.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black-creation-networks-58795.webp?v=1757941512\" alt=\"Meyer Sound Ashby-8C 8-inch in-ceiling active loudspeaker in black\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ashby-8C combines onboard Class-D amplification with sophisticated signal processing to produce the flat frequency and phase response for which Meyer Sound loudspeakers are known. A 0.75-inch metal-dome tweeter is mounted concentrically over an 8-inch cone driver in a coaxial configuration that maximizes the wave-guide surface for even directivity. The loudspeaker draws balanced audio and 48 V DC power over a single composite cable from a Meyer Sound MPS IntelligentDC power supply, which permits longer, lighter-gauge cable runs without conduit under NEC Class 2 wiring. Its zinc-plated steel back-can is fire-rated for installation in air-handling plenum spaces, and the low-profile perforated steel grille blends discreetly into finished ceilings. For smaller rooms or tighter spacing, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-5c-5-5-active-speaker-with-attn\"\u003eMeyer Sound Ashby-5C\u003c\/a\u003e offers the same IntelligentDC architecture in a 5-inch format, and the full IntelligentDC range is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. This unit is the black, no-attenuator configuration.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard Class-D amplification with a total output power of 440 W peak removes the need for external amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Transducer\u003c\/strong\u003e — A 0.75-inch dome tweeter mounted concentrically over an 8-inch cone driver delivers point-source coherence across the listening area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Conical Coverage\u003c\/strong\u003e — A consistent 100° conical pattern lets fewer loudspeakers cover a larger floor area while maintaining even level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh SPL-to-Size Ratio\u003c\/strong\u003e — Linear peak SPL reaches 114 dB with 19 dB crest factor (M-noise) from a compact ceiling enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Power and Audio\u003c\/strong\u003e — Balanced audio and 48 V DC power are delivered over a single composite cable from an MPS power supply, supporting long, light-gauge runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlenum-Rated Enclosure\u003c\/strong\u003e — The zinc-plated steel back-can is fire-rated to UL 2043 for installation in air-handling ceiling spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM are specified at less than 0.02% for clean reproduction of speech and music.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiscreet Flush Mounting\u003c\/strong\u003e — A low-profile perforated steel grille flush-mounts into ceilings and blends with most interior finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference rooms and boardrooms requiring high-quality distributed program and voice reproduction\u003c\/li\u003e\n\u003cli\u003eHouse of worship sanctuaries and multi-purpose rooms needing wide, even ceiling coverage\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces and all-hands rooms with distributed audio and paging\u003c\/li\u003e\n\u003cli\u003eTraining rooms and government spaces where intelligible speech is critical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e60 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e67 Hz – 16 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e190 Hz – 16 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e114 dB with 19 dB crest factor (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° conical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 8-inch cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 0.75-inch dome tweeter mounted concentrically in wave guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHigh-efficiency, Class-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e440 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt;0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo Phoenix 5-pin male (one input, one hardwired loop output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC (Meyer Sound MPS-488HP or MPS-482HP required); NEC Class 2 wiring approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutside Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e12.64 in (321.0 mm) diameter; 8.87 in (225.3 mm) depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCutout Diameter Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e11.42 – 11.83 in (290.0 – 300.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e13.8 lb (6.26 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eZinc-plated steel-back can and UL 94 V-0 rated baffle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFire Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUL 2043 for air-handling spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound Ashby-8C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eQSC AcousticDesign AD-C8T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eJBL Control 26C\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSelf-powered with onboard Class-D amplifier and DSP via IntelligentDC.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external amplifier and 70\/100 V transformer or low-impedance drive.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external amplifier and typically 70\/100 V distribution.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8-inch cone driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8-inch cone driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e6.5-inch cone driver.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOnboard Processing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIntegrated DSP delivers flat frequency and phase response from the factory.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo onboard DSP; processing handled by external amplifier or processor.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo onboard DSP; processing handled externally.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° conical.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eConical coverage in a comparable wide-angle pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWide conical coverage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSingle composite cable carries balanced audio and 48 V DC under NEC Class 2.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpeaker-level cabling from a distributed amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpeaker-level cabling from a distributed amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePlenum Fire Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUL 2043 rated back-can for air-handling spaces.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePlenum-rated back-can available.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOptional plenum back-can.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Ashby-8C require a separate amplifier?\u003c\/strong\u003e\u003cbr\u003eNo. The Ashby-8C is self-powered with an onboard Class-D amplifier, but it does require a Meyer Sound MPS-488HP or MPS-482HP IntelligentDC power supply to deliver 48 V DC and balanced audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many Ashby-8C units can one power supply drive?\u003c\/strong\u003e\u003cbr\u003eOne MPS-488HP can power up to 16 Ashby-8C loudspeakers (2 per channel), and one MPS-482HP can power up to 4 Ashby-8C loudspeakers (2 per channel).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Ashby-8C be installed in a plenum ceiling?\u003c\/strong\u003e\u003cbr\u003eYes. The zinc-plated steel back-can is fire-rated to UL 2043 for installation in air-handling spaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the no-ATTN designation mean?\u003c\/strong\u003e\u003cbr\u003eThis configuration ships without an onboard attenuator, which is appropriate when output level is set upstream at the source or processor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this product covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942440526060,"sku":"09.260.001.02","price":1980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black-creation-networks-58795.webp?v=1757941512"},{"product_id":"meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black","title":"Meyer Sound Ashby-8C-8\" In-Ceiling Active Speaker with ATTN (Black) - 09.260.001.04","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound Ashby-8C is a self-powered 8-inch in-ceiling loudspeaker built for distributed audio systems that demand accurate music reproduction and high speech intelligibility. Engineered on Meyer Sound's IntelligentDC platform, it delivers a deeper low end and higher SPL than most in-ceiling loudspeakers of comparable size. A smooth, consistent 100° conical coverage pattern lets fewer units cover a larger area, reducing system count and cost. This black-finish model includes an onboard attenuator (ATTN) for local level adjustment during commissioning.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black-creation-networks-58795.webp?v=1757941512\" alt=\"Meyer Sound Ashby-8C 8-inch in-ceiling active loudspeaker in black with attenuator\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ashby-8C pairs onboard Class-D amplification with sophisticated signal processing to deliver the flat frequency and phase response characteristic of Meyer Sound loudspeakers. A 0.75-inch metal-dome tweeter is mounted concentrically over an 8-inch cone driver in a coaxial layout that maximizes wave-guide surface for even directivity. Balanced audio and 48 V DC power arrive over a single composite cable from a Meyer Sound MPS IntelligentDC power supply, enabling long, light-gauge cable runs without conduit under NEC Class 2 wiring. The zinc-plated steel back-can is fire-rated for air-handling plenum spaces, and the low-profile perforated steel grille blends discreetly into finished ceilings. For smaller rooms or tighter loudspeaker spacing, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-5c-5-5-active-speaker-with-attn\"\u003eMeyer Sound Ashby-5C\u003c\/a\u003e provides the same IntelligentDC architecture in a 5-inch format, and the broader range is available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e. This unit is the black, attenuator-equipped configuration.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard Attenuator\u003c\/strong\u003e — An integrated ATTN control allows local output level adjustment at the loudspeaker during system commissioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design\u003c\/strong\u003e — Onboard Class-D amplification with a total output power of 440 W peak eliminates external amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Transducer\u003c\/strong\u003e — A 0.75-inch dome tweeter mounted concentrically over an 8-inch cone driver delivers point-source coherence across the coverage area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Conical Coverage\u003c\/strong\u003e — A consistent 100° conical pattern allows fewer loudspeakers to cover a larger floor area at even level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh SPL-to-Size Ratio\u003c\/strong\u003e — Linear peak SPL reaches 114 dB with 19 dB crest factor (M-noise) from a compact enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligentDC Power and Audio\u003c\/strong\u003e — Balanced audio and 48 V DC power travel over a single composite cable from an MPS power supply, supporting long, light-gauge runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlenum-Rated Enclosure\u003c\/strong\u003e — The zinc-plated steel back-can is fire-rated to UL 2043 for air-handling ceiling spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Distortion\u003c\/strong\u003e — THD, IM, and TIM are specified at less than 0.02% for clean speech and music reproduction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference rooms and boardrooms requiring high-quality distributed program and voice reproduction\u003c\/li\u003e\n\u003cli\u003eHouse of worship sanctuaries and multi-purpose rooms needing wide, even ceiling coverage\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces and all-hands rooms with distributed audio and paging\u003c\/li\u003e\n\u003cli\u003eTraining rooms and government spaces where intelligible speech is critical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e60 Hz – 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e67 Hz – 16 kHz ±4 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e190 Hz – 16 kHz ±45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLinear Peak SPL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e114 dB with 19 dB crest factor (M-noise)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° conical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 8-inch cone driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHigh Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne 0.75-inch dome tweeter mounted concentrically in wave guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplifier Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eHigh-efficiency, Class-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e440 W peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTHD, IM, TIM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u0026lt;0.02%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDifferential, electronically balanced; 10 kΩ input impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo Phoenix 5-pin male (one input, one hardwired loop output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC (Meyer Sound MPS-488HP or MPS-482HP required); NEC Class 2 wiring approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutside Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e12.64 in (321.0 mm) diameter; 8.87 in (225.3 mm) depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCutout Diameter Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e11.42 – 11.83 in (290.0 – 300.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e13.8 lb (6.26 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eZinc-plated steel-back can and UL 94 V-0 rated baffle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFire Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUL 2043 for air-handling spaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCriterion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMeyer Sound Ashby-8C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eQSC AcousticDesign AD-C8T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eJBL Control 26C\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAmplification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSelf-powered with onboard Class-D amplifier and DSP via IntelligentDC.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external amplifier and 70\/100 V transformer or low-impedance drive.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePassive; requires an external amplifier and typically 70\/100 V distribution.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLow Frequency Driver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8-inch cone driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e8-inch cone driver.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e6.5-inch cone driver.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOnboard Processing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eIntegrated DSP delivers flat frequency and phase response from the factory.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo onboard DSP; processing handled by external amplifier or processor.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNo onboard DSP; processing handled externally.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100° conical.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eConical coverage in a comparable wide-angle pattern.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWide conical coverage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSingle composite cable carries balanced audio and 48 V DC under NEC Class 2.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpeaker-level cabling from a distributed amplifier.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSpeaker-level cabling from a distributed amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePlenum Fire Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUL 2043 rated back-can for air-handling spaces.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePlenum-rated back-can available.\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOptional plenum back-can.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the ATTN designation mean?\u003c\/strong\u003e\u003cbr\u003eThis configuration includes an onboard attenuator that allows the installer to set the output level locally at the loudspeaker, which is useful when balancing zones during commissioning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Ashby-8C require a separate amplifier?\u003c\/strong\u003e\u003cbr\u003eNo. The Ashby-8C is self-powered, but it requires a Meyer Sound MPS-488HP or MPS-482HP IntelligentDC power supply to deliver 48 V DC and balanced audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many Ashby-8C units can one power supply drive?\u003c\/strong\u003e\u003cbr\u003eOne MPS-488HP can power up to 16 Ashby-8C loudspeakers (2 per channel), and one MPS-482HP can power up to 4 Ashby-8C loudspeakers (2 per channel).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Ashby-8C be installed in a plenum ceiling?\u003c\/strong\u003e\u003cbr\u003eYes. The zinc-plated steel back-can is fire-rated to UL 2043 for installation in air-handling spaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this product covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942442918124,"sku":"09.260.001.04","price":2060.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-8-in-ceiling-active-speaker-with-attn-black-creation-networks-58795.webp?v=1757941512"},{"product_id":"meyer-sound-ashby-8c-pendant-kit","title":"Meyer Sound ASHBY-8C Pendant Kit - 40.260.030.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound ASHBY-8C Pendant Kit is a mounting accessory that allows the Ashby-8C in-ceiling loudspeaker to hang from a ceiling where a flush-mount installation is not practical. The enclosure uses a minimalistic design borrowed from pendant lighting to blend discreetly into the environment. It is intended for use with the Meyer Sound Ashby-8C self-powered loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-pendant-kit-creation-networks-31616.png?v=1757941514\" alt=\"Meyer Sound ASHBY-8C Pendant Kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis pendant kit suspends the Ashby-8C loudspeaker in open-ceiling environments such as exposed-structure interiors and high-ceiling spaces where cutting into a finished ceiling is not an option. The pendant enclosure adopts the clean, understated profile of architectural pendant lighting so the loudspeaker integrates visually with the room. It is designed specifically for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-8c-8-active-speaker-5-pin-input\"\u003eMeyer Sound Ashby-8C\u003c\/a\u003e and is one of several mounting options available alongside the C-ring with bridge kit and new construction bracket. Additional Ashby mounting accessories and loudspeakers are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePendant Suspension\u003c\/strong\u003e — Allows the Ashby-8C to hang from the ceiling where a flush-mount installation is not practical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiscreet Architectural Design\u003c\/strong\u003e — A minimalistic enclosure modeled on pendant lighting blends into the environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAshby-8C Compatibility\u003c\/strong\u003e — Designed specifically as a mounting option for the Meyer Sound Ashby-8C loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen-Ceiling Installation\u003c\/strong\u003e — Suited to exposed-structure and high-ceiling spaces where flush mounting is not feasible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePendant mounting kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound Ashby-8C in-ceiling loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSuspends the loudspeaker from the ceiling where flush-mount is not practical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.260.030.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942445211884,"sku":"40.260.030.01","price":290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-pendant-kit-creation-networks-31616.png?v=1757941514"},{"product_id":"meyer-sound-ashby-8c-grille-frame-assembly-kit-white","title":"Meyer Sound ASHBY-8C Grille Frame Assembly Kit (White) - 40.260.061.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound ASHBY-8C Grille Frame Assembly Kit (White) is a replacement grille and frame assembly for the Ashby-8C in-ceiling loudspeaker. It provides the perforated steel grille that completes a flush-mount installation and blends the loudspeaker into a finished ceiling. This kit is finished in white to match light-colored ceiling surfaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-grille-frame-assembly-kit-white-creation-networks-42516.jpg?v=1757941516\" alt=\"Meyer Sound ASHBY-8C Grille Frame Assembly Kit in white\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis grille frame assembly serves as a replacement or color-matched front for the Ashby-8C loudspeaker. The Ashby-8C uses a low-profile perforated steel grille that flush-mounts into ceilings and blends discreetly with most interior finishes, and this kit supplies that grille and frame in white. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-8c-8-active-speaker-5-pin-input\"\u003eMeyer Sound Ashby-8C\u003c\/a\u003e and is available in both white and black finishes. Additional Ashby accessories and loudspeakers can be found in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforated Steel Grille\u003c\/strong\u003e — Supplies the perforated steel grille and frame used to complete an Ashby-8C flush-mount installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Finish\u003c\/strong\u003e — Finished in white to blend with light-colored ceiling surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAshby-8C Compatibility\u003c\/strong\u003e — Designed specifically for the Meyer Sound Ashby-8C in-ceiling loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Design\u003c\/strong\u003e — A low-profile grille blends discreetly into finished ceilings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eGrille frame assembly kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eGrille Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePerforated steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eGrille Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e12.97 in (329.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound Ashby-8C in-ceiling loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.260.061.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942450880748,"sku":"40.260.061.01","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-grille-frame-assembly-kit-white-creation-networks-42516.jpg?v=1757941516"},{"product_id":"meyer-sound-ashby-8c-grille-frame-assembly-kit-black","title":"Meyer Sound ASHBY-8C Grille Frame Assembly Kit (Black) - 40.260.061.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound ASHBY-8C Grille Frame Assembly Kit (Black) is a replacement grille and frame assembly for the Ashby-8C in-ceiling loudspeaker. It provides the perforated steel grille that completes a flush-mount installation and blends the loudspeaker into a finished ceiling. This kit is finished in black to match dark-colored ceiling surfaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-grille-frame-assembly-kit-black-creation-networks-67415.jpg?v=1757941517\" alt=\"Meyer Sound ASHBY-8C Grille Frame Assembly Kit in black\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis grille frame assembly serves as a replacement or color-matched front for the Ashby-8C loudspeaker. The Ashby-8C uses a low-profile perforated steel grille that flush-mounts into ceilings and blends discreetly with most interior finishes, and this kit supplies that grille and frame in black for dark ceilings and exposed-structure interiors. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-8c-8-active-speaker-5-pin-input\"\u003eMeyer Sound Ashby-8C\u003c\/a\u003e and is available in both black and white finishes. Additional Ashby accessories and loudspeakers can be found in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforated Steel Grille\u003c\/strong\u003e — Supplies the perforated steel grille and frame used to complete an Ashby-8C flush-mount installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Finish\u003c\/strong\u003e — Finished in black to blend with dark ceilings and exposed-structure interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAshby-8C Compatibility\u003c\/strong\u003e — Designed specifically for the Meyer Sound Ashby-8C in-ceiling loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Design\u003c\/strong\u003e — A low-profile grille blends discreetly into finished ceilings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eGrille frame assembly kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eGrille Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePerforated steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eGrille Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e12.97 in (329.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound Ashby-8C in-ceiling loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.260.061.02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942461825260,"sku":"40.260.061.02","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-grille-frame-assembly-kit-black-creation-networks-67415.jpg?v=1757941517"},{"product_id":"meyer-sound-ashby-8c-tile-c-ring-kit","title":"Meyer Sound ASHBY-8C Tile C Ring Kit - 40.260.130.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound ASHBY-8C Tile C Ring Kit is a mounting accessory for installing the Ashby-8C in-ceiling loudspeaker into suspended tile ceilings. The C-ring better distributes the clamping force of the loudspeaker's four mounting clamps across the ceiling tile. It is intended for use with the Meyer Sound Ashby-8C loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-tile-c-ring-kit-creation-networks-82727.jpg?v=1757941519\" alt=\"Meyer Sound ASHBY-8C Tile C Ring Kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis C-ring kit supports installation of the Ashby-8C into suspended ceiling tiles by spreading the clamping load of the loudspeaker's four mounting clamps over a wider area of the tile. Distributing that force helps protect the tile and provides a secure, even mount. It is designed specifically for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-8c-8-active-speaker-5-pin-input\"\u003eMeyer Sound Ashby-8C\u003c\/a\u003e and is one of several mounting options offered alongside the C-ring with bridge kit, new construction bracket, and pendant kit. Additional Ashby mounting accessories are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamping Force Distribution\u003c\/strong\u003e — The C-ring distributes the clamping force of the four mounting clamps across the ceiling tile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspended Ceiling Mounting\u003c\/strong\u003e — Supports installation of the Ashby-8C into suspended tile ceilings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAshby-8C Compatibility\u003c\/strong\u003e — Designed specifically for the Meyer Sound Ashby-8C in-ceiling loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Even Mount\u003c\/strong\u003e — Spreading the load over a wider area provides a secure, even installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTile C-ring mounting kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDistributes mounting-clamp force across a suspended ceiling tile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound Ashby-8C in-ceiling loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.260.130.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942462611692,"sku":"40.260.130.01","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-tile-c-ring-kit-creation-networks-82727.jpg?v=1757941519"},{"product_id":"meyer-sound-ashby-8c-tile-c-ring-with-bridge-kit","title":"Meyer Sound ASHBY-8C Tile C Ring with Bridge Kit - 40.260.131.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound ASHBY-8C Tile C Ring with Bridge Kit is a mounting accessory for installing the Ashby-8C in-ceiling loudspeaker into suspended tile ceilings. The C-ring distributes the clamping force of the loudspeaker's four mounting clamps, while the bridges help support and distribute the weight of the loudspeaker. It is intended for use with the Meyer Sound Ashby-8C loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-tile-c-ring-with-bridge-kit-creation-networks-60869.jpg?v=1757941520\" alt=\"Meyer Sound ASHBY-8C Tile C Ring with Bridge Kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit combines a C-ring with supporting bridges for suspended-ceiling installations of the Ashby-8C. The C-ring spreads the clamping load of the loudspeaker's four mounting clamps across the ceiling tile, while the bridges carry and distribute the weight of the loudspeaker for a secure mount in suspended tile grids. It is designed specifically for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-8c-8-active-speaker-5-pin-input\"\u003eMeyer Sound Ashby-8C\u003c\/a\u003e and is one of several mounting options offered alongside the tile C-ring kit, new construction bracket, and pendant kit. Additional Ashby mounting accessories are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamping Force Distribution\u003c\/strong\u003e — The C-ring distributes the clamping force of the four mounting clamps across the ceiling tile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight-Bearing Bridges\u003c\/strong\u003e — Integrated bridges help support and distribute the weight of the loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspended Ceiling Mounting\u003c\/strong\u003e — Designed for installation of the Ashby-8C into suspended tile ceilings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAshby-8C Compatibility\u003c\/strong\u003e — Designed specifically for the Meyer Sound Ashby-8C in-ceiling loudspeaker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTile C-ring with bridge mounting kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDistributes clamping force and supports loudspeaker weight in suspended ceilings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound Ashby-8C in-ceiling loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.260.131.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942464774380,"sku":"40.260.131.01","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-tile-c-ring-with-bridge-kit-creation-networks-60869.jpg?v=1757941520"},{"product_id":"meyer-sound-ashby-8c-new-construction-bracket-kit","title":"Meyer Sound ASHBY-8C New Construction Bracket Kit - 40.260.140.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound ASHBY-8C New Construction Bracket Kit is a mounting accessory for installing the Ashby-8C in-ceiling loudspeaker during new construction. The bracket fastens to the ceiling structure and acts as a template for the ceiling cutout, ensuring a neat installation. It is intended for use with the Meyer Sound Ashby-8C loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-new-construction-bracket-kit-creation-networks-42072.jpg?v=1757941520\" alt=\"Meyer Sound ASHBY-8C New Construction Bracket Kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket supports pre-construction installation of the Ashby-8C by fastening to the ceiling framing before the finished ceiling goes in. It doubles as a cutout template, helping the installer locate and size the opening accurately for a clean, repeatable result across multiple positions. It is designed specifically for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-8c-8-active-speaker-5-pin-input\"\u003eMeyer Sound Ashby-8C\u003c\/a\u003e and is one of several mounting options offered alongside the tile C-ring kit, C-ring with bridge kit, and pendant kit. Additional Ashby mounting accessories are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNew Construction Mounting\u003c\/strong\u003e — Fastens to the ceiling structure for installation during new construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutout Template\u003c\/strong\u003e — Acts as a template for the ceiling cutout to ensure a neat installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAshby-8C Compatibility\u003c\/strong\u003e — Designed specifically for the Meyer Sound Ashby-8C in-ceiling loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeatable Installation\u003c\/strong\u003e — Helps locate and size openings consistently across multiple loudspeaker positions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNew construction bracket kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFastens to ceiling structure and serves as a cutout template\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound Ashby-8C in-ceiling loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.260.140.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942466773228,"sku":"40.260.140.01","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-8c-new-construction-bracket-kit-creation-networks-42072.jpg?v=1757941520"},{"product_id":"meyer-sound-ashby-8c-pendant-kit-1","title":"Meyer Sound ASHBY-5C Pendant Kit - 40.261.030.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound ASHBY-5C Pendant Kit is a mounting accessory that allows the Ashby-5C in-ceiling loudspeaker to hang from a ceiling where a flush-mount installation is not practical. The enclosure uses a minimalistic design borrowed from pendant lighting to blend discreetly into the environment. It is intended for use with the Meyer Sound Ashby-5C self-powered loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-5c-pendant-kit-creation-networks-58209.png?v=1757941521\" alt=\"Meyer Sound ASHBY-5C Pendant Kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis pendant kit suspends the Ashby-5C loudspeaker in open-ceiling environments such as exposed-structure interiors and high-ceiling spaces where cutting into a finished ceiling is not an option. The pendant enclosure adopts the clean, understated profile of architectural pendant lighting so the loudspeaker integrates visually with the room. It is designed specifically for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-5c-5-5-active-speaker-with-attn\"\u003eMeyer Sound Ashby-5C\u003c\/a\u003e and is one of several mounting options available alongside the C-ring with bridge kit and new construction bracket. Additional Ashby mounting accessories and loudspeakers are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePendant Suspension\u003c\/strong\u003e — Allows the Ashby-5C to hang from the ceiling where a flush-mount installation is not practical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiscreet Architectural Design\u003c\/strong\u003e — A minimalistic enclosure modeled on pendant lighting blends into the environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAshby-5C Compatibility\u003c\/strong\u003e — Designed specifically as a mounting option for the Meyer Sound Ashby-5C loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen-Ceiling Installation\u003c\/strong\u003e — Suited to exposed-structure and high-ceiling spaces where flush mounting is not feasible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePendant mounting kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound Ashby-5C in-ceiling loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSuspends the loudspeaker from the ceiling where flush-mount is not practical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.261.030.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942468182252,"sku":"40.261.030.01","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-5c-pendant-kit-creation-networks-58209.png?v=1757941521"},{"product_id":"meyer-sound-ashby-5c-grille-frame-assembly-kit-white","title":"Meyer Sound ASHBY-5C Grille Frame Assembly Kit (White) - 40.261.060.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound ASHBY-5C Grille Frame Assembly Kit (White) is a replacement grille and frame assembly for the Ashby-5C in-ceiling loudspeaker. It provides the perforated steel grille that completes a flush-mount installation and blends the loudspeaker into a finished ceiling. This kit is finished in white to match light-colored ceiling surfaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-5c-grille-frame-assembly-kit-white-creation-networks-81174.jpg?v=1757941523\" alt=\"Meyer Sound ASHBY-5C Grille Frame Assembly Kit in white\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis grille frame assembly serves as a replacement or color-matched front for the Ashby-5C loudspeaker. The Ashby-5C uses a low-profile perforated steel grille that flush-mounts into ceilings and blends discreetly with most interior finishes, and this kit supplies that grille and frame in white. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-5c-5-5-active-speaker-with-attn\"\u003eMeyer Sound Ashby-5C\u003c\/a\u003e and is available in both white and black finishes. Additional Ashby accessories and loudspeakers can be found in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforated Steel Grille\u003c\/strong\u003e — Supplies the perforated steel grille and frame used to complete an Ashby-5C flush-mount installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Finish\u003c\/strong\u003e — Finished in white to blend with light-colored ceiling surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAshby-5C Compatibility\u003c\/strong\u003e — Designed specifically for the Meyer Sound Ashby-5C in-ceiling loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Design\u003c\/strong\u003e — A low-profile grille blends discreetly into finished ceilings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eGrille frame assembly kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eGrille Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePerforated steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eGrille Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e9.34 in (237.3 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound Ashby-5C in-ceiling loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.261.060.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942474440940,"sku":"40.261.060.01","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-5c-grille-frame-assembly-kit-white-creation-networks-81174.jpg?v=1757941523"},{"product_id":"meyer-sound-ashby-5c-grille-frame-assembly-kit-black","title":"Meyer Sound ASHBY-5C Grille Frame Assembly Kit (Black) - 40.261.060.02","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound ASHBY-5C Grille Frame Assembly Kit (Black) is a replacement grille and frame assembly for the Ashby-5C in-ceiling loudspeaker. It provides the perforated steel grille that completes a flush-mount installation and blends the loudspeaker into a finished ceiling. This kit is finished in black to match dark-colored ceiling surfaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-5c-grille-frame-assembly-kit-black-creation-networks-88146.jpg?v=1757941525\" alt=\"Meyer Sound ASHBY-5C Grille Frame Assembly Kit in black\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis grille frame assembly serves as a replacement or color-matched front for the Ashby-5C loudspeaker. The Ashby-5C uses a low-profile perforated steel grille that flush-mounts into ceilings and blends discreetly with most interior finishes, and this kit supplies that grille and frame in black for dark ceilings and exposed-structure interiors. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-5c-5-5-active-speaker-with-attn\"\u003eMeyer Sound Ashby-5C\u003c\/a\u003e and is available in both black and white finishes. Additional Ashby accessories and loudspeakers can be found in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforated Steel Grille\u003c\/strong\u003e — Supplies the perforated steel grille and frame used to complete an Ashby-5C flush-mount installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Finish\u003c\/strong\u003e — Finished in black to blend with dark ceilings and exposed-structure interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAshby-5C Compatibility\u003c\/strong\u003e — Designed specifically for the Meyer Sound Ashby-5C in-ceiling loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Design\u003c\/strong\u003e — A low-profile grille blends discreetly into finished ceilings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eGrille frame assembly kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eGrille Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePerforated steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eGrille Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e9.34 in (237.3 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound Ashby-5C in-ceiling loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.261.060.02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942475587820,"sku":"40.261.060.02","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-5c-grille-frame-assembly-kit-black-creation-networks-88146.jpg?v=1757941525"},{"product_id":"meyer-sound-ashby-5c-tile-c-ring-kit","title":"Meyer Sound ASHBY-5C Tile C Ring Kit - 40.261.130.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound ASHBY-5C Tile C Ring Kit is a mounting accessory for installing the Ashby-5C in-ceiling loudspeaker into suspended tile ceilings. The C-ring better distributes the clamping force of the loudspeaker's four mounting clamps across the ceiling tile. It is intended for use with the Meyer Sound Ashby-5C loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-5c-tile-c-ring-kit-creation-networks-95357.jpg?v=1757941526\" alt=\"Meyer Sound ASHBY-5C Tile C Ring Kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis C-ring kit supports installation of the Ashby-5C into suspended ceiling tiles by spreading the clamping load of the loudspeaker's four mounting clamps over a wider area of the tile. Distributing that force helps protect the tile and provides a secure, even mount. It is designed specifically for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-5c-5-5-active-speaker-with-attn\"\u003eMeyer Sound Ashby-5C\u003c\/a\u003e and is one of several mounting options offered alongside the C-ring with bridge kit, new construction bracket, and pendant kit. Additional Ashby mounting accessories are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamping Force Distribution\u003c\/strong\u003e — The C-ring distributes the clamping force of the four mounting clamps across the ceiling tile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspended Ceiling Mounting\u003c\/strong\u003e — Supports installation of the Ashby-5C into suspended tile ceilings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAshby-5C Compatibility\u003c\/strong\u003e — Designed specifically for the Meyer Sound Ashby-5C in-ceiling loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Even Mount\u003c\/strong\u003e — Spreading the load over a wider area provides a secure, even installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTile C-ring mounting kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDistributes mounting-clamp force across a suspended ceiling tile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound Ashby-5C in-ceiling loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.261.130.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942476669164,"sku":"40.261.130.01","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-5c-tile-c-ring-kit-creation-networks-95357.jpg?v=1757941526"},{"product_id":"meyer-sound-ashby-5c-tile-c-ring-with-bridge-kit","title":"Meyer Sound ASHBY-5C Tile C Ring with Bridge Kit - 40.261.131.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound ASHBY-5C Tile C Ring with Bridge Kit is a mounting accessory for installing the Ashby-5C in-ceiling loudspeaker into suspended tile ceilings. The C-ring distributes the clamping force of the loudspeaker's four mounting clamps, while the bridges help support and distribute the weight of the loudspeaker. It is intended for use with the Meyer Sound Ashby-5C loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-5c-tile-c-ring-with-bridge-kit-creation-networks-36106.jpg?v=1757941527\" alt=\"Meyer Sound ASHBY-5C Tile C Ring with Bridge Kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit combines a C-ring with supporting bridges for suspended-ceiling installations of the Ashby-5C. The C-ring spreads the clamping load of the loudspeaker's four mounting clamps across the ceiling tile, while the bridges carry and distribute the weight of the loudspeaker for a secure mount in suspended tile grids. It is designed specifically for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-5c-5-5-active-speaker-with-attn\"\u003eMeyer Sound Ashby-5C\u003c\/a\u003e and is one of several mounting options offered alongside the tile C-ring kit, new construction bracket, and pendant kit. Additional Ashby mounting accessories are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamping Force Distribution\u003c\/strong\u003e — The C-ring distributes the clamping force of the four mounting clamps across the ceiling tile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight-Bearing Bridges\u003c\/strong\u003e — Integrated bridges help support and distribute the weight of the loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspended Ceiling Mounting\u003c\/strong\u003e — Designed for installation of the Ashby-5C into suspended tile ceilings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAshby-5C Compatibility\u003c\/strong\u003e — Designed specifically for the Meyer Sound Ashby-5C in-ceiling loudspeaker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTile C-ring with bridge mounting kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eDistributes clamping force and supports loudspeaker weight in suspended ceilings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound Ashby-5C in-ceiling loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.261.131.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942480077036,"sku":"40.261.131.01","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-5c-tile-c-ring-with-bridge-kit-creation-networks-36106.jpg?v=1757941527"},{"product_id":"meyer-sound-ashby-5c-new-construction-bracket-kit","title":"Meyer Sound ASHBY-5C New Construction Bracket Kit - 40.261.140.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound ASHBY-5C New Construction Bracket Kit is a mounting accessory for installing the Ashby-5C in-ceiling loudspeaker during new construction. The bracket fastens to the ceiling structure and acts as a template for the ceiling cutout, ensuring a neat installation. It is intended for use with the Meyer Sound Ashby-5C loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-5c-new-construction-bracket-kit-creation-networks-48943.jpg?v=1757941528\" alt=\"Meyer Sound ASHBY-5C New Construction Bracket Kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket supports pre-construction installation of the Ashby-5C by fastening to the ceiling framing before the finished ceiling goes in. It doubles as a cutout template, helping the installer locate and size the opening accurately for a clean, repeatable result across multiple positions. It is designed specifically for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-ashby-5c-5-5-active-speaker-with-attn\"\u003eMeyer Sound Ashby-5C\u003c\/a\u003e and is one of several mounting options offered alongside the tile C-ring kit, C-ring with bridge kit, and pendant kit. Additional Ashby mounting accessories are available in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNew Construction Mounting\u003c\/strong\u003e — Fastens to the ceiling structure for installation during new construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutout Template\u003c\/strong\u003e — Acts as a template for the ceiling cutout to ensure a neat installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAshby-5C Compatibility\u003c\/strong\u003e — Designed specifically for the Meyer Sound Ashby-5C in-ceiling loudspeaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeatable Installation\u003c\/strong\u003e — Helps locate and size openings consistently across multiple loudspeaker positions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNew construction bracket kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eFastens to ceiling structure and serves as a cutout template\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound Ashby-5C in-ceiling loudspeaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.261.140.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45942488760556,"sku":"40.261.140.01","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-ashby-5c-new-construction-bracket-kit-creation-networks-48943.jpg?v=1757941528"},{"product_id":"meyer-sound-mps-482hp-2-channel-power-supply-5-pin-phoenix-output-1ru","title":"Meyer Sound MPS-482HP 2-Channel Power Supply, 5-Pin Phoenix Output, 1RU - 09.285.001.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MPS-482HP is a two-channel IntelligentDC power supply that delivers 48 V DC power and balanced audio to remotely self-powered Meyer Sound loudspeakers over a single composite cable. Housed in a compact 1RU, half-rack-width enclosure, it is ideal for installations requiring a small channel count or remote wall or ceiling mounting. Its fanless design operates silently, making it well suited to acoustically sensitive spaces. The unit routes two channels of balanced audio from XLR or Phoenix inputs to two 5-pin Phoenix outputs.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mps-482hp-2-channel-power-supply-5-pin-phoenix-output-1ru-creation-networks-11679.jpg?v=1757941596\" alt=\"Meyer Sound MPS-482HP 2-Channel Power Supply 5-Pin Phoenix Output 1RU\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MPS-482HP expands the flexibility and cost-effectiveness of Meyer Sound's IntelligentDC remotely self-powered systems. It is designed to power compact IntelligentDC loudspeakers such as the MM-4XP, UP-4XP, UP-4slim, ULTRA-X20XP, and USW-112XP, and it can drive up to six Ashby-5C or four Ashby-8C ceiling loudspeakers, making it well suited to powering surrounds in immersive configurations. The unit receives two channels of balanced audio from two XLR 3-pin female connectors or one 6-pin Phoenix male connector and routes the audio along with DC power to its two 5-pin Phoenix male outputs. Using composite multi-conductor cables such as Belden 1502, a single cable carries both audio and 48 V DC power to the loudspeakers, eliminating wiring conduits while preserving the advantages of self-powered systems. A rear-panel link switch routes channel 1 to both outputs for convenient signal sharing, and front-panel user-replaceable fuses protect each channel output from short circuits and wiring errors. For higher channel counts, consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mps-488x-8-channel-power-supply-5-pin-phoenix-output-1ru-w-monitor\"\u003eMeyer Sound MPS-488X 8-Channel Power Supply\u003c\/a\u003e, and view the complete range in our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel IntelligentDC Power\u003c\/strong\u003e — The supply powers Meyer Sound IntelligentDC loudspeakers that require an external 48 V DC source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined Audio and Power\u003c\/strong\u003e — Each output routes balanced audio and DC power to loudspeakers over a single composite cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Half-Rack Enclosure\u003c\/strong\u003e — The 1RU, half-rack-width chassis suits small channel counts and remote installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFanless Operation\u003c\/strong\u003e — The fanless design operates quietly in acoustically sensitive environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Inputs\u003c\/strong\u003e — Audio is received from two XLR 3-pin female connectors or one 6-pin male Phoenix connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Link Switch\u003c\/strong\u003e — A rear-panel switch routes the channel 1 input signal to both outputs without additional cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Replaceable Fuses\u003c\/strong\u003e — Front-panel fuses protect each channel output from short circuits and wiring errors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus LEDs\u003c\/strong\u003e — Three LEDs per channel indicate output voltage presence, load current, and fuse status.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Versatility\u003c\/strong\u003e — M6 threads support the optional 2RU Tray and Wall Bracket for rack, wall, ceiling, or pole mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConference Room\u003c\/strong\u003e — Quiet, compact power for distributed IntelligentDC loudspeakers in meeting spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Remote-mounted power supply feeding ceiling and surround loudspeakers in worship environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Silent operation for cinema and television post-production and monitoring facilities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Flexible power for small-channel-count loudspeaker systems in reconfigurable spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo XLR 3-pin female connectors OR one 6-pin male Phoenix connector; one link switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eChannel Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo Phoenix 5-pin male connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutput Wiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo pins for DC power, three pins for balanced audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC per channel (supports NEC Class 2 wiring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003epowerCON 20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSafety Rated Voltage Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC; 50–60 Hz; 220 W maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eIdle Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e0.14 A (115 V AC); 0.07 A (230 V AC); 0.15 A rms (100 V AC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e1RU, 1\/2 width: W 8.5 in (216 mm) x H 1.85 in (47 mm) x D 8.62 in (219 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e4.4 lb (2 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e0° C to +45° C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eHumidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTo 95% at 35° C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Altitude\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTo 5,000 m (16,404 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the MPS-482HP power?\u003c\/strong\u003e\u003cbr\u003eIt powers Meyer Sound IntelligentDC loudspeakers that require an external 48 V DC source, including compact models such as the MM-4XP, UP-4slim, and ULTRA-X20XP, and it can drive up to six Ashby-5C or four Ashby-8C ceiling loudspeakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is audio and power delivered to the loudspeakers?\u003c\/strong\u003e\u003cbr\u003eEach 5-pin Phoenix output carries both balanced audio and 48 V DC power over a single composite cable such as Belden 1502, eliminating the need for separate audio and power conduits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the unit be mounted remotely?\u003c\/strong\u003e\u003cbr\u003eYes. M6 threads support the optional MPS-482HP Wall Bracket for wall, ceiling, or pole mounting, and the optional 2RU Tray allows mounting one or two units in a standard 19-inch rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it operate quietly?\u003c\/strong\u003e\u003cbr\u003eYes. The fanless design operates silently, making it suitable for acoustically sensitive environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943022977260,"sku":"09.285.001.01","price":1060.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mps-482hp-2-channel-power-supply-5-pin-phoenix-output-1ru-creation-networks-11679.jpg?v=1757941596"},{"product_id":"meyer-sound-mps-488x-8-channel-power-supply-5-pin-phoenix-output-1ru-w-monitor","title":"Meyer Sound MPS-488X 8-Channel Power Supply, 5-Pin Phoenix Output, 1RU w\/monitor - 09.314.001.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MPS-488X is an eight-channel IntelligentDC power supply that delivers 48 V DC power and balanced audio to remotely self-powered Meyer Sound loudspeakers. Housed in a 1RU rack-mount chassis, it supports larger installations that require centralized power for multiple IntelligentDC loudspeakers. The unit adds network telemetry, reporting voltage, current, temperature, and fan speed to Meyer Sound's Nebra software. Eight 5-pin Phoenix outputs route both audio and DC power to each connected loudspeaker.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mps-488x-8-channel-power-supply-5-pin-phoenix-output-1ru-wmonitor-creation-networks-56690.jpg?v=1757941598\" alt=\"Meyer Sound MPS-488X 8-Channel Power Supply 5-Pin Phoenix Output 1RU with monitor\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MPS-488X is the eight-channel member of Meyer Sound's MPS IntelligentDC power supply family, providing centralized 48 V DC power and balanced audio distribution for self-powered loudspeaker systems. Each of its eight outputs delivers DC power and balanced audio to a loudspeaker over a single composite cable, with intelligent circuit protection guarding each channel against surges and shorts. Eight male 3-pin Phoenix audio inputs feed the eight 5-pin Phoenix outputs, and seven link switches allow flexible signal sharing across channels. The front panel provides eight blue LEDs indicating output voltage presence and eight green LEDs indicating load current. A dedicated monitoring RJ45 connector provides a standard Ethernet connection to a computer running Meyer Sound's Nebra software, reporting per-channel voltage and current, temperature, and fan speed, with Wink\/identify and mute functions for remote management. For smaller channel counts, consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mps-482hp-2-channel-power-supply-5-pin-phoenix-output-1ru\"\u003eMeyer Sound MPS-482HP 2-Channel Power Supply\u003c\/a\u003e, and browse the complete lineup in our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-Channel IntelligentDC Power\u003c\/strong\u003e — The supply delivers 48 V DC power and balanced audio to eight Meyer Sound IntelligentDC loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined Audio and Power\u003c\/strong\u003e — Each output routes balanced audio and DC power to a loudspeaker over a single composite cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligent Circuit Protection\u003c\/strong\u003e — Each channel output provides protection against surges and shorts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Telemetry\u003c\/strong\u003e — The monitoring RJ45 connector reports per-channel voltage and current, temperature, and fan speed to Meyer Sound's Nebra software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Management Functions\u003c\/strong\u003e — Nebra telemetry includes Wink\/identify and mute functions for each unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Phoenix Inputs and Outputs\u003c\/strong\u003e — Eight 3-pin Phoenix audio inputs feed eight 5-pin Phoenix outputs, with seven link switches for signal sharing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Status LEDs\u003c\/strong\u003e — Eight blue LEDs indicate output voltage and eight green LEDs indicate load current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRUE1 TOP AC Connector\u003c\/strong\u003e — A Neutrik powerCON TRUE1 TOP connector provides a secure locking AC inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1RU Rack-Mount Chassis\u003c\/strong\u003e — The full-width 1RU enclosure integrates into standard 19-inch equipment racks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHouse of Worship\u003c\/strong\u003e — Centralized power and monitoring for multiple IntelligentDC loudspeakers in worship venues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuditorium\u003c\/strong\u003e — Rack-mounted power distribution for self-powered loudspeaker systems in performing arts spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Purpose Room\u003c\/strong\u003e — Eight-channel power for distributed loudspeaker zones in reconfigurable facilities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Studio\u003c\/strong\u003e — Monitored power delivery for cinema and television post-production and monitoring environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernment Space\u003c\/strong\u003e — Reliable centralized power with network telemetry for civic and meeting facilities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEight male 3-pin Phoenix connectors; seven link switches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eChannel Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEight male 5-pin Phoenix connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutput Wiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eTwo pins for DC power, three pins for balanced audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOutput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC per channel with intelligent circuit protection (supports NEC Class 2 wiring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFront Panel LEDs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eEight blue (output voltage), eight green (load current)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eTelemetry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMonitoring RJ45 to Nebra software; reports voltage, current, temperature, fan speed; Wink and mute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eAC Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eNeutrik powerCON TRUE1 TOP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSafety Rated Voltage Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100–240 V AC; 50–60 Hz; 1350 W maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e1RU: W 19.00 in (483 mm) x H 1.73 in (44 mm) x D 16.22 in (412 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e15.1 lb (6.9 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e0° C to +45° C (32° F to 113° F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eOperating Altitude\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eUp to 5,000 m (16,000 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow many loudspeakers can the MPS-488X power?\u003c\/strong\u003e\u003cbr\u003eIt provides eight channels of 48 V DC power and balanced audio for Meyer Sound IntelligentDC loudspeakers, one per output channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat monitoring capabilities does it offer?\u003c\/strong\u003e\u003cbr\u003eA dedicated monitoring RJ45 connector provides an Ethernet connection to Meyer Sound's Nebra software, reporting per-channel voltage and current, temperature, and fan speed, with Wink\/identify and mute functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is audio and power delivered to the loudspeakers?\u003c\/strong\u003e\u003cbr\u003eEach 5-pin Phoenix output carries both balanced audio and 48 V DC power over a single composite cable, with intelligent circuit protection on each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it differ from the MPS-482HP?\u003c\/strong\u003e\u003cbr\u003eThe MPS-482HP is a two-channel, half-rack-width supply for smaller systems, while the MPS-488X provides eight channels and network telemetry in a full-width 1RU chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cbr\u003eThis product is covered under Meyer Sound's standard product warranty. For details, please \u003ca href=\"https:\/\/creationnetworks.net\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943024877804,"sku":"09.314.001.01","price":3050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mps-488x-8-channel-power-supply-5-pin-phoenix-output-1ru-wmonitor-creation-networks-56690.jpg?v=1757941598"},{"product_id":"meyer-sound-cbl-en3f-en3m-10-10-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker","title":"Meyer Sound CBL-EN3F-EN3M-10 10' 3-Pin Female to 3-Pin Male Cable for MM-4XP Speaker - 28.163.009.21","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound CBL-EN3F-EN3M-10 is a 10-foot interconnect cable terminated with a SwitchCraft EN3 3-pin female connector on one end and an EN3 3-pin male connector on the other. It is designed for IntelligentDC loudspeaker systems based on the EN3 connector standard, carrying balanced audio between EN3-equipped devices. This factory-assembled cable provides a reliable, ready-to-use connection for MM-4XP loudspeaker installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-en3m-10-10-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-creation-networks-17265.jpg?v=1757941610\" alt=\"Meyer Sound CBL-EN3F-EN3M-10 10-foot 3-pin female to 3-pin male EN3 cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 10-foot cable uses the SwitchCraft EN3 connector system specified for Meyer Sound IntelligentDC loudspeakers. The female and male EN3 terminations allow the cable to extend or interconnect EN3 runs in a distributed loudspeaker installation. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e and other EN3-equipped IntelligentDC loudspeakers. For longer runs or alternate terminations, additional cable lengths and Phoenix-terminated assemblies are available in our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 Female to Male Termination\u003c\/strong\u003e — SwitchCraft EN3 3-pin female and 3-pin male connectors for IntelligentDC EN3 loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Length\u003c\/strong\u003e — Factory-assembled 10-foot run for short interconnect distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Assembled\u003c\/strong\u003e — Ready-to-use cable built to Meyer Sound specifications for reliable connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM-4XP Compatibility\u003c\/strong\u003e — Designed for use with MM-4XP and other EN3-equipped Meyer Sound loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e10 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 3-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 3-pin male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound IntelligentDC (EN3 connector standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP and other EN3-equipped Meyer Sound loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.163.009.21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943027859692,"sku":"28.163.009.21","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-en3m-100-100-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-creation-networks-89154.jpg?v=1757941601"},{"product_id":"meyer-sound-cbl-en3f-en3m-20-20-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker","title":"Meyer Sound CBL-EN3F-EN3M-20 20' 3-Pin Female to 3-Pin Male Cable for MM-4XP Speaker - 28.163.009.22","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound CBL-EN3F-EN3M-20 is a 20-foot interconnect cable terminated with a SwitchCraft EN3 3-pin female connector on one end and an EN3 3-pin male connector on the other. It is designed for IntelligentDC loudspeaker systems based on the EN3 connector standard, carrying balanced audio between EN3-equipped devices. This factory-assembled cable provides a reliable, ready-to-use connection for MM-4XP loudspeaker installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-en3m-100-100-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-creation-networks-89154.jpg?v=1757941601\" alt=\"Meyer Sound CBL-EN3F-EN3M-20 20-foot 3-pin female to 3-pin male EN3 cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 20-foot cable uses the SwitchCraft EN3 connector system specified for Meyer Sound IntelligentDC loudspeakers. The female and male EN3 terminations allow the cable to extend or interconnect EN3 runs in a distributed loudspeaker installation. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e and other EN3-equipped IntelligentDC loudspeakers. For other lengths or Phoenix-terminated assemblies, see our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 Female to Male Termination\u003c\/strong\u003e — SwitchCraft EN3 3-pin female and 3-pin male connectors for IntelligentDC EN3 loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length\u003c\/strong\u003e — Factory-assembled 20-foot run for medium interconnect distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Assembled\u003c\/strong\u003e — Ready-to-use cable built to Meyer Sound specifications for reliable connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM-4XP Compatibility\u003c\/strong\u003e — Designed for use with MM-4XP and other EN3-equipped Meyer Sound loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e20 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 3-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 3-pin male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound IntelligentDC (EN3 connector standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP and other EN3-equipped Meyer Sound loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.163.009.22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943031660780,"sku":"28.163.009.22","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-en3m-100-100-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-creation-networks-89154.jpg?v=1757941601"},{"product_id":"meyer-sound-cbl-en3f-en3m-30-30-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker","title":"Meyer Sound CBL-EN3F-EN3M-30 30' 3-Pin Female to 3-Pin Male Cable for MM-4XP Speaker - 28.163.009.23","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound CBL-EN3F-EN3M-30 is a 30-foot interconnect cable terminated with a SwitchCraft EN3 3-pin female connector on one end and an EN3 3-pin male connector on the other. It is designed for IntelligentDC loudspeaker systems based on the EN3 connector standard, carrying balanced audio between EN3-equipped devices. This factory-assembled cable provides a reliable, ready-to-use connection for MM-4XP loudspeaker installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-en3m-100-100-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-creation-networks-89154.jpg?v=1757941601\" alt=\"Meyer Sound CBL-EN3F-EN3M-30 30-foot 3-pin female to 3-pin male EN3 cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 30-foot cable uses the SwitchCraft EN3 connector system specified for Meyer Sound IntelligentDC loudspeakers. The female and male EN3 terminations allow the cable to extend or interconnect EN3 runs in a distributed loudspeaker installation. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e and other EN3-equipped IntelligentDC loudspeakers. For other lengths or Phoenix-terminated assemblies, see our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 Female to Male Termination\u003c\/strong\u003e — SwitchCraft EN3 3-pin female and 3-pin male connectors for IntelligentDC EN3 loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Foot Length\u003c\/strong\u003e — Factory-assembled 30-foot run for medium interconnect distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Assembled\u003c\/strong\u003e — Ready-to-use cable built to Meyer Sound specifications for reliable connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM-4XP Compatibility\u003c\/strong\u003e — Designed for use with MM-4XP and other EN3-equipped Meyer Sound loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 3-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 3-pin male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound IntelligentDC (EN3 connector standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP and other EN3-equipped Meyer Sound loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.163.009.23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943034151148,"sku":"28.163.009.23","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-en3m-100-100-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-creation-networks-89154.jpg?v=1757941601"},{"product_id":"meyer-sound-cbl-en3f-en3m-50-50-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker","title":"Meyer Sound CBL-EN3F-EN3M-50 50' 3-Pin Female to 3-Pin Male Cable for MM-4XP Speaker - 28.163.009.24","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound CBL-EN3F-EN3M-50 is a 50-foot interconnect cable terminated with a SwitchCraft EN3 3-pin female connector on one end and an EN3 3-pin male connector on the other. It is designed for IntelligentDC loudspeaker systems based on the EN3 connector standard, carrying balanced audio between EN3-equipped devices. This factory-assembled cable provides a reliable, ready-to-use connection for MM-4XP loudspeaker installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-en3m-100-100-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-creation-networks-89154.jpg?v=1757941601\" alt=\"Meyer Sound CBL-EN3F-EN3M-50 50-foot 3-pin female to 3-pin male EN3 cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 50-foot cable uses the SwitchCraft EN3 connector system specified for Meyer Sound IntelligentDC loudspeakers. The female and male EN3 terminations allow the cable to extend or interconnect EN3 runs in a distributed loudspeaker installation. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e and other EN3-equipped IntelligentDC loudspeakers. For other lengths or Phoenix-terminated assemblies, see our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 Female to Male Termination\u003c\/strong\u003e — SwitchCraft EN3 3-pin female and 3-pin male connectors for IntelligentDC EN3 loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-Foot Length\u003c\/strong\u003e — Factory-assembled 50-foot run for longer interconnect distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Assembled\u003c\/strong\u003e — Ready-to-use cable built to Meyer Sound specifications for reliable connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM-4XP Compatibility\u003c\/strong\u003e — Designed for use with MM-4XP and other EN3-equipped Meyer Sound loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e50 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 3-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 3-pin male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound IntelligentDC (EN3 connector standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP and other EN3-equipped Meyer Sound loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.163.009.24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943034904812,"sku":"28.163.009.24","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-en3m-100-100-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-creation-networks-89154.jpg?v=1757941601"},{"product_id":"meyer-sound-cbl-en3f-en3m-100-100-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker","title":"Meyer Sound CBL-EN3F-EN3M-100 100' 3-Pin Female to 3-Pin Male Cable for MM-4XP Speaker - 28.163.009.26","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound CBL-EN3F-EN3M-100 is a 100-foot interconnect cable terminated with a SwitchCraft EN3 3-pin female connector on one end and an EN3 3-pin male connector on the other. It is designed for IntelligentDC loudspeaker systems based on the EN3 connector standard, carrying balanced audio between EN3-equipped devices over longer distances. This factory-assembled cable provides a reliable, ready-to-use connection for MM-4XP loudspeaker installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-en3m-100-100-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-creation-networks-89154.jpg?v=1757941601\" alt=\"Meyer Sound CBL-EN3F-EN3M-100 100-foot 3-pin female to 3-pin male EN3 cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 100-foot cable uses the SwitchCraft EN3 connector system specified for Meyer Sound IntelligentDC loudspeakers. The female and male EN3 terminations allow the cable to extend or interconnect EN3 runs across a larger distributed loudspeaker installation. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e and other EN3-equipped IntelligentDC loudspeakers. For other lengths or Phoenix-terminated assemblies, see our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 Female to Male Termination\u003c\/strong\u003e — SwitchCraft EN3 3-pin female and 3-pin male connectors for IntelligentDC EN3 loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Foot Length\u003c\/strong\u003e — Factory-assembled 100-foot run for long interconnect distances in larger installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Assembled\u003c\/strong\u003e — Ready-to-use cable built to Meyer Sound specifications for reliable connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM-4XP Compatibility\u003c\/strong\u003e — Designed for use with MM-4XP and other EN3-equipped Meyer Sound loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 3-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 3-pin male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound IntelligentDC (EN3 connector standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP and other EN3-equipped Meyer Sound loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.163.009.26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943042572524,"sku":"28.163.009.26","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-en3m-100-100-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-creation-networks-89154.jpg?v=1757941601"},{"product_id":"meyer-sound-cbl-en3f-phnx5-10-10-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp","title":"Meyer Sound CBL-EN3F-PHNX5-10 10' 5-Pin Female to Phoenix 5-Pin Female Cable for MM-4XP Sp - 28.163.009.41","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound CBL-EN3F-PHNX5-10 is a 10-foot composite cable terminated with a SwitchCraft EN3 5-pin female connector on the loudspeaker end and a Phoenix 5-pin female connector on the power supply end. The five-conductor design carries both 48 V DC power and balanced audio on a single cable, connecting an EN3-equipped IntelligentDC loudspeaker to a Phoenix-output Meyer Sound power supply. This factory-assembled cable is intended for MM-4XP installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp-creation-networks-18870.jpg?v=1757941608\" alt=\"Meyer Sound CBL-EN3F-PHNX5-10 10-foot 5-pin female to Phoenix 5-pin female cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 10-foot cable bridges the EN3 5-pin connector on the loudspeaker to a Phoenix 5-pin connector at a Meyer Sound IntelligentDC power supply such as the MPS-482HP or MPS-488HP. As a composite five-conductor assembly it carries DC power (two pins) and balanced audio (three pins) together, simplifying distribution wiring. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e and other EN3-equipped IntelligentDC loudspeakers. For other lengths, see our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 to Phoenix Termination\u003c\/strong\u003e — SwitchCraft EN3 5-pin female and Phoenix 5-pin female connectors link an EN3 loudspeaker to a Phoenix-output power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Power and Audio\u003c\/strong\u003e — Carries both 48 V DC power and balanced audio on a single five-conductor cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Length\u003c\/strong\u003e — Factory-assembled 10-foot run for short interconnect distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM-4XP Compatibility\u003c\/strong\u003e — Designed for use with MM-4XP and other EN3-equipped Meyer Sound IntelligentDC loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e10 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhoenix 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSignal Carried\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC power (2 pins) plus balanced audio (3 pins)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound IntelligentDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP and other EN3-equipped loudspeakers with Phoenix-output power supplies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.163.009.41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943047684332,"sku":"28.163.009.41","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp-creation-networks-18870.jpg?v=1757941608"},{"product_id":"meyer-sound-cbl-en3f-phnx5-20-20-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp","title":"Meyer Sound CBL-EN3F-PHNX5-20 20' 5-Pin Female to Phoenix 5-Pin Female Cable for MM-4XP Sp - 28.163.009.42","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound CBL-EN3F-PHNX5-20 is a 20-foot composite cable terminated with a SwitchCraft EN3 5-pin female connector on the loudspeaker end and a Phoenix 5-pin female connector on the power supply end. The five-conductor design carries both 48 V DC power and balanced audio on a single cable, connecting an EN3-equipped IntelligentDC loudspeaker to a Phoenix-output Meyer Sound power supply. This factory-assembled cable is intended for MM-4XP installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp-creation-networks-18870.jpg?v=1757941608\" alt=\"Meyer Sound CBL-EN3F-PHNX5-20 20-foot 5-pin female to Phoenix 5-pin female cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 20-foot cable bridges the EN3 5-pin connector on the loudspeaker to a Phoenix 5-pin connector at a Meyer Sound IntelligentDC power supply such as the MPS-482HP or MPS-488HP. As a composite five-conductor assembly it carries DC power (two pins) and balanced audio (three pins) together, simplifying distribution wiring. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e and other EN3-equipped IntelligentDC loudspeakers. For other lengths, see our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 to Phoenix Termination\u003c\/strong\u003e — SwitchCraft EN3 5-pin female and Phoenix 5-pin female connectors link an EN3 loudspeaker to a Phoenix-output power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Power and Audio\u003c\/strong\u003e — Carries both 48 V DC power and balanced audio on a single five-conductor cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length\u003c\/strong\u003e — Factory-assembled 20-foot run for medium interconnect distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM-4XP Compatibility\u003c\/strong\u003e — Designed for use with MM-4XP and other EN3-equipped Meyer Sound IntelligentDC loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e20 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhoenix 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSignal Carried\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC power (2 pins) plus balanced audio (3 pins)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound IntelligentDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP and other EN3-equipped loudspeakers with Phoenix-output power supplies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.163.009.42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943049060588,"sku":"28.163.009.42","price":170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp-creation-networks-18870.jpg?v=1757941608"},{"product_id":"meyer-sound-cbl-en3f-phnx5-30-30-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp","title":"Meyer Sound CBL-EN3F-PHNX5-30 30' 5-Pin Female to Phoenix 5-Pin Female Cable for MM-4XP Sp - 28.163.009.43","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound CBL-EN3F-PHNX5-30 is a 30-foot composite cable terminated with a SwitchCraft EN3 5-pin female connector on the loudspeaker end and a Phoenix 5-pin female connector on the power supply end. The five-conductor design carries both 48 V DC power and balanced audio on a single cable, connecting an EN3-equipped IntelligentDC loudspeaker to a Phoenix-output Meyer Sound power supply. This factory-assembled cable is intended for MM-4XP installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp-creation-networks-18870.jpg?v=1757941608\" alt=\"Meyer Sound CBL-EN3F-PHNX5-30 30-foot 5-pin female to Phoenix 5-pin female cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 30-foot cable bridges the EN3 5-pin connector on the loudspeaker to a Phoenix 5-pin connector at a Meyer Sound IntelligentDC power supply such as the MPS-482HP or MPS-488HP. As a composite five-conductor assembly it carries DC power (two pins) and balanced audio (three pins) together, simplifying distribution wiring. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e and other EN3-equipped IntelligentDC loudspeakers. For other lengths, see our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 to Phoenix Termination\u003c\/strong\u003e — SwitchCraft EN3 5-pin female and Phoenix 5-pin female connectors link an EN3 loudspeaker to a Phoenix-output power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Power and Audio\u003c\/strong\u003e — Carries both 48 V DC power and balanced audio on a single five-conductor cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Foot Length\u003c\/strong\u003e — Factory-assembled 30-foot run for medium interconnect distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM-4XP Compatibility\u003c\/strong\u003e — Designed for use with MM-4XP and other EN3-equipped Meyer Sound IntelligentDC loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e30 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhoenix 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSignal Carried\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC power (2 pins) plus balanced audio (3 pins)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound IntelligentDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP and other EN3-equipped loudspeakers with Phoenix-output power supplies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.163.009.43\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943051288812,"sku":"28.163.009.43","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp-creation-networks-18870.jpg?v=1757941608"},{"product_id":"meyer-sound-cbl-en3f-phnx5-50-50-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp","title":"Meyer Sound CBL-EN3F-PHNX5-50 50' 5-Pin Female to Phoenix 5-Pin Female Cable for MM-4XP Sp - 28.163.009.44","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound CBL-EN3F-PHNX5-50 is a 50-foot composite cable terminated with a SwitchCraft EN3 5-pin female connector on the loudspeaker end and a Phoenix 5-pin female connector on the power supply end. The five-conductor design carries both 48 V DC power and balanced audio on a single cable, connecting an EN3-equipped IntelligentDC loudspeaker to a Phoenix-output Meyer Sound power supply. This factory-assembled cable is intended for MM-4XP installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp-creation-networks-18870.jpg?v=1757941608\" alt=\"Meyer Sound CBL-EN3F-PHNX5-50 50-foot 5-pin female to Phoenix 5-pin female cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 50-foot cable bridges the EN3 5-pin connector on the loudspeaker to a Phoenix 5-pin connector at a Meyer Sound IntelligentDC power supply such as the MPS-482HP or MPS-488HP. As a composite five-conductor assembly it carries DC power (two pins) and balanced audio (three pins) together, simplifying distribution wiring. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e and other EN3-equipped IntelligentDC loudspeakers. For other lengths, see our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 to Phoenix Termination\u003c\/strong\u003e — SwitchCraft EN3 5-pin female and Phoenix 5-pin female connectors link an EN3 loudspeaker to a Phoenix-output power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Power and Audio\u003c\/strong\u003e — Carries both 48 V DC power and balanced audio on a single five-conductor cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-Foot Length\u003c\/strong\u003e — Factory-assembled 50-foot run for longer interconnect distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM-4XP Compatibility\u003c\/strong\u003e — Designed for use with MM-4XP and other EN3-equipped Meyer Sound IntelligentDC loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e50 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhoenix 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSignal Carried\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC power (2 pins) plus balanced audio (3 pins)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound IntelligentDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP and other EN3-equipped loudspeakers with Phoenix-output power supplies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.163.009.44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943052435692,"sku":"28.163.009.44","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp-creation-networks-18870.jpg?v=1757941608"},{"product_id":"meyer-sound-cbl-en3f-phnx5-100-100-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp","title":"Meyer Sound CBL-EN3F-PHNX5-100 100' 5-Pin Female to Phoenix 5-Pin Female Cable for MM-4XP Sp - 28.163.009.45","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound CBL-EN3F-PHNX5-100 is a 100-foot composite cable terminated with a SwitchCraft EN3 5-pin female connector on the loudspeaker end and a Phoenix 5-pin female connector on the power supply end. The five-conductor design carries both 48 V DC power and balanced audio on a single cable, connecting an EN3-equipped IntelligentDC loudspeaker to a Phoenix-output Meyer Sound power supply over longer distances. This factory-assembled cable is intended for MM-4XP installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp-creation-networks-18870.jpg?v=1757941608\" alt=\"Meyer Sound CBL-EN3F-PHNX5-100 100-foot 5-pin female to Phoenix 5-pin female cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 100-foot cable bridges the EN3 5-pin connector on the loudspeaker to a Phoenix 5-pin connector at a Meyer Sound IntelligentDC power supply such as the MPS-482HP or MPS-488HP. As a composite five-conductor assembly it carries DC power (two pins) and balanced audio (three pins) together, simplifying distribution wiring across longer runs. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e and other EN3-equipped IntelligentDC loudspeakers. For other lengths, see our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 to Phoenix Termination\u003c\/strong\u003e — SwitchCraft EN3 5-pin female and Phoenix 5-pin female connectors link an EN3 loudspeaker to a Phoenix-output power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Power and Audio\u003c\/strong\u003e — Carries both 48 V DC power and balanced audio on a single five-conductor cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Foot Length\u003c\/strong\u003e — Factory-assembled 100-foot run for long interconnect distances in larger installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM-4XP Compatibility\u003c\/strong\u003e — Designed for use with MM-4XP and other EN3-equipped Meyer Sound IntelligentDC loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e100 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhoenix 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSignal Carried\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC power (2 pins) plus balanced audio (3 pins)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound IntelligentDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP and other EN3-equipped loudspeakers with Phoenix-output power supplies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.163.009.45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943055679724,"sku":"28.163.009.45","price":340.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp-creation-networks-18870.jpg?v=1757941608"},{"product_id":"meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp","title":"Meyer Sound CBL-EN3F-PHNX5-150 150' 5-Pin Female to Phoenix 5-Pin Female Cable for MM-4XP Sp - 28.163.009.46","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound CBL-EN3F-PHNX5-150 is a 150-foot composite cable terminated with a SwitchCraft EN3 5-pin female connector on the loudspeaker end and a Phoenix 5-pin female connector on the power supply end. The five-conductor design carries both 48 V DC power and balanced audio on a single cable, connecting an EN3-equipped IntelligentDC loudspeaker to a Phoenix-output Meyer Sound power supply over extended distances. This factory-assembled cable is intended for MM-4XP installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp-creation-networks-18870.jpg?v=1757941608\" alt=\"Meyer Sound CBL-EN3F-PHNX5-150 150-foot 5-pin female to Phoenix 5-pin female cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 150-foot cable bridges the EN3 5-pin connector on the loudspeaker to a Phoenix 5-pin connector at a Meyer Sound IntelligentDC power supply such as the MPS-482HP or MPS-488HP. As a composite five-conductor assembly it carries DC power (two pins) and balanced audio (three pins) together, simplifying distribution wiring across extended runs. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e and other EN3-equipped IntelligentDC loudspeakers. For other lengths, see our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 to Phoenix Termination\u003c\/strong\u003e — SwitchCraft EN3 5-pin female and Phoenix 5-pin female connectors link an EN3 loudspeaker to a Phoenix-output power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Power and Audio\u003c\/strong\u003e — Carries both 48 V DC power and balanced audio on a single five-conductor cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150-Foot Length\u003c\/strong\u003e — Factory-assembled 150-foot run for extended interconnect distances in larger installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM-4XP Compatibility\u003c\/strong\u003e — Designed for use with MM-4XP and other EN3-equipped Meyer Sound IntelligentDC loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e150 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003ePhoenix 5-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSignal Carried\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e48 V DC power (2 pins) plus balanced audio (3 pins)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound IntelligentDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP and other EN3-equipped loudspeakers with Phoenix-output power supplies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.163.009.46\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943057383660,"sku":"28.163.009.46","price":470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-phnx5-150-150-5-pin-female-to-phoenix-5-pin-female-cable-for-mm-4xp-sp-creation-networks-18870.jpg?v=1757941608"},{"product_id":"meyer-sound-cbl-en3f-en3m-10-10-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-1","title":"Meyer Sound CBL-EN3F-EN3M-10 10' 3-Pin Female to 3-Pin Male Cable for MM-4XP Speaker - 28.163.009.60","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound CBL-EN3F-EN3M-10 is a 10-foot interconnect cable terminated with a SwitchCraft EN3 3-pin female connector on one end and an EN3 3-pin male connector on the other. It is designed for IntelligentDC loudspeaker systems based on the EN3 connector standard, carrying balanced audio between EN3-equipped devices. This factory-assembled cable provides a reliable, ready-to-use connection for MM-4XP loudspeaker installations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-en3m-10-10-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-creation-networks-17265.jpg?v=1757941610\" alt=\"Meyer Sound CBL-EN3F-EN3M-10 10-foot 3-pin female to 3-pin male EN3 cable\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 10-foot cable uses the SwitchCraft EN3 connector system specified for Meyer Sound IntelligentDC loudspeakers. The female and male EN3 terminations allow the cable to extend or interconnect EN3 runs in a distributed loudspeaker installation. It is intended for use with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mm-4xp-4-active-speaker-3-pin-input-white\"\u003eMeyer Sound MM-4XP\u003c\/a\u003e and other EN3-equipped IntelligentDC loudspeakers. For longer runs or alternate terminations, additional cable lengths and Phoenix-terminated assemblies are available in our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN3 Female to Male Termination\u003c\/strong\u003e — SwitchCraft EN3 3-pin female and 3-pin male connectors for IntelligentDC EN3 loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Length\u003c\/strong\u003e — Factory-assembled 10-foot run for short interconnect distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Assembled\u003c\/strong\u003e — Ready-to-use cable built to Meyer Sound specifications for reliable connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM-4XP Compatibility\u003c\/strong\u003e — Designed for use with MM-4XP and other EN3-equipped Meyer Sound loudspeakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e10 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 3-pin female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eConnector B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSwitchCraft EN3 3-pin male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSystem\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound IntelligentDC (EN3 connector standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMM-4XP and other EN3-equipped Meyer Sound loudspeakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e28.163.009.60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943059054828,"sku":"28.163.009.60","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-cbl-en3f-en3m-10-10-3-pin-female-to-3-pin-male-cable-for-mm-4xp-speaker-creation-networks-17265.jpg?v=1757941610"},{"product_id":"meyer-sound-mps-482hp-2ru-tray-kit","title":"Meyer Sound MPS-482HP 2RU Tray Kit - 40.285.013.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MPS-482HP 2RU Tray Kit enables rack mounting of one or two MPS-482HP power supplies in a standard EIA 19-inch wide, 2RU rack space. The tray accommodates the compact half-rack-width MPS-482HP and provides a clean, secure installation in equipment racks. Its 2RU height leaves the area above the unit open to facilitate cooling. A face tray cover is included for use when only one side of the tray is populated.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mps-482hp-2ru-tray-kit-creation-networks-24533.jpg?v=1757941611\" alt=\"Meyer Sound MPS-482HP 2RU Tray Kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MPS-482HP 2RU Tray Kit is the rack-mount accessory for the MPS-482HP IntelligentDC power supply, allowing integrators to install one or two supplies in a single standard 19-inch, 2RU rack slot. Because the MPS-482HP is a half-rack-width unit, the tray lets a pair of supplies sit side by side, or a single supply with the supplied face tray cover filling the empty position. The 2RU tray height keeps the space above the power supply open, facilitating cooling of the fanless MPS-482HP during operation. This tray pairs directly with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mps-482hp-2-channel-power-supply-5-pin-phoenix-output-1ru\"\u003eMeyer Sound MPS-482HP 2-Channel Power Supply\u003c\/a\u003e, and the full range of Meyer Sound products is available in our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack-Mount Capacity\u003c\/strong\u003e — The tray mounts one or two MPS-482HP power supplies in a standard EIA 19-inch wide, 2RU rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling-Friendly Design\u003c\/strong\u003e — The 2RU tray height leaves the area above the unit empty to facilitate cooling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Face Cover\u003c\/strong\u003e — A face tray cover is supplied for use when only one side of the tray is populated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Fit\u003c\/strong\u003e — The tray is purpose-built for the half-rack-width MPS-482HP power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.285.013.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eRack Format\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eStandard EIA 19-inch wide, 2RU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne or two MPS-482HP power supplies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eIncluded\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eRack-mount tray with face tray cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound MPS-482HP Power Supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943101260012,"sku":"40.285.013.01","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mps-482hp-2ru-tray-kit-creation-networks-24533.jpg?v=1757941611"},{"product_id":"meyer-sound-mps-482hp-wall-bracket-kit","title":"Meyer Sound MPS-482HP Wall Bracket Kit - 40.285.015.01","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Meyer Sound MPS-482HP Wall Bracket Kit enables remote mounting of one MPS-482HP power supply on a ceiling, wall, or pole. It provides a secure way to locate the power supply away from the equipment rack, close to the loudspeakers it powers. The bracket can be oriented with the power supply hung below it or mounted on top, with the bracket-above orientation providing space for cable routing. It accommodates M6 fasteners.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mps-482hp-wall-bracket-kit-creation-networks-26866.jpg?v=1757941612\" alt=\"Meyer Sound MPS-482HP Wall Bracket Kit\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe MPS-482HP Wall Bracket Kit is the remote-mounting accessory for the MPS-482HP IntelligentDC power supply, allowing the unit to be installed directly on a ceiling, wall, or pole using a third-party pole mount. The bracket can be configured with the power supply hanging below it or fixed on top; mounting the bracket above the power supply provides room for cable routing, complementing the strain-relief tabs built into the power supply enclosure. The bracket accommodates M6 fasteners and provides a clean alternative to rack mounting for distributed installations. This bracket pairs directly with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/meyer-sound-mps-482hp-2-channel-power-supply-5-pin-phoenix-output-1ru\"\u003eMeyer Sound MPS-482HP 2-Channel Power Supply\u003c\/a\u003e, and the complete Meyer Sound range is available in our \u003ca href=\"https:\/\/creationnetworks.net\/collections\/meyer-sound\"\u003eMeyer Sound collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Mounting\u003c\/strong\u003e — The bracket mounts one MPS-482HP power supply on a ceiling, wall, or pole using a third-party pole mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Orientation\u003c\/strong\u003e — The power supply can hang below the bracket or be mounted on top to suit the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing Space\u003c\/strong\u003e — The bracket-above-power-supply orientation provides space for cable routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM6 Fastener Compatibility\u003c\/strong\u003e — The bracket accommodates M6 fasteners for secure installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e40.285.015.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eMounting Surfaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eCeiling, wall, or pole (third-party pole mount)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eOne MPS-482HP power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eFasteners\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eAccommodates M6 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eMeyer Sound MPS-482HP Power Supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Meyer Sound. Subject to change without notice.\u003c\/p\u003e","brand":"Meyer Sound","offers":[{"title":"Default Title","offer_id":45943105814764,"sku":"40.285.015.01","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/meyer-sound-mps-482hp-wall-bracket-kit-creation-networks-26866.jpg?v=1757941612"}],"url":"https:\/\/creationnetworks.net\/collections\/meyer-sound-architectural-residential.oembed","provider":"Creation Networks","version":"1.0","type":"link"}