{"title":"Lightware TPX SDVoE Transmitters \u0026 Receivers","description":"\u003cp\u003eLightware TPX series SDVoE-compatible transmitters, receivers and scaling receivers for uncompressed AV distribution over 10G Ethernet.\u003c\/p\u003e\n\n\u003ch2\u003eWhy SDVoE rather than a matrix\u003c\/h2\u003e\u003cp\u003eSDVoE moves uncompressed 4K video over a standard 10G network switch with zero added latency, which means the routing capacity is set by the switch rather than by a fixed matrix frame. In a facility that keeps growing, that is the difference between adding a switch port and replacing the matrix.\u003c\/p\u003e\n\u003cp\u003eThe network is the system. SDVoE requires a 10G switch with the correct multicast and IGMP configuration, and a switch that has not been set up for it will produce faults that look like AV problems. Specify the switch as part of the AV design, not as IT's responsibility.\u003c\/p\u003e\n\u003cp\u003eScaling receivers handle format conversion at the display end, which is what lets mixed resolutions coexist on one system.\u003c\/p\u003e\n\n\u003cp\u003eCreation Networks designs SDVoE systems including the network layer, and commissions both together. Call 888-230-3661 or email sales@creationnetworks.net.\u003c\/p\u003e","products":[{"product_id":"lightware-hdmi-tpx-rx106-avx-non-switchable-hdmi-2-0-extender-91580001","title":"Lightware HDMI-TPX-RX106 AVX (non-switchable) HDMI 2.0 extender - 91580001","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPX-RX106 is an HDMI 2.0 HDBaseT receiver that accepts a structured Cat6A or Cat7 cable from the paired HDMI-TPX-TX106 transmitter and outputs an HDMI 2.0 signal to a local display, along with USB HID, RS-232, and IR. It is the display-side unit in a Lightware VINX TPX point-to-point HDBaseT extension system, supporting runs up to 100 meters. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx106-avx-non-switchable-hdmi-2-0-extender-91580001-creation-networks-43268.jpg?v=1757925260\" alt=\"Lightware HDMI-TPX-RX106 HDMI 2.0 HDBaseT receiver\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eDeployed at the display end of an HDBaseT cable run, the HDMI-TPX-RX106 decodes the HDBaseT signal from the transmitter and presents a clean HDMI 2.0 output to the connected display or AV device. It simultaneously handles the return path: USB HID signals from a keyboard or mouse at the display location are sent back to the transmitter (and connected computer), RS-232 is passed bidirectionally for display control, and IR commands are forwarded in both directions. The receiver can be powered via Power over HDBaseT (PoH) from the HDMI-TPX-TX106 transmitter, eliminating the need for a local power supply at the display location — which is particularly valuable for ceiling-mounted or wall-mounted installations. The compact form factor suits mounting behind displays, in wall boxes, or on rack shelves.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHDMI 2.0 output up to 4K@60Hz (4:2:0) and 1080p@60Hz (4:4:4)\u003c\/li\u003e\n\u003cli\u003eHDBaseT input from paired HDMI-TPX-TX106 transmitter — up to 100m\u003c\/li\u003e\n\u003cli\u003eUSB HID (keyboard and mouse) return path to transmitter\u003c\/li\u003e\n\u003cli\u003eBidirectional RS-232 for display and device control\u003c\/li\u003e\n\u003cli\u003eBidirectional IR control pass-through\u003c\/li\u003e\n\u003cli\u003ePowered by PoH from transmitter — no local power supply required\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant\u003c\/li\u003e\n\u003cli\u003eCompact form factor for behind-display or in-wall mounting\u003c\/li\u003e\n\u003cli\u003ePairs with HDMI-TPX-TX106 transmitter (91580002)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room AV — receiving HDMI 2.0 at the wall-mounted display from a table-top or rack transmitter\u003c\/li\u003e\n\u003cli\u003eClassroom projector and display connections over existing Cat structured cabling\u003c\/li\u003e\n\u003cli\u003eBoardroom fixed-source HDMI extension with display control via RS-232\u003c\/li\u003e\n\u003cli\u003eHospitality meeting room displays receiving content from a rack-mounted source\u003c\/li\u003e\n\u003cli\u003eCeiling-mounted projectors in lecture halls and auditoriums requiring PoH-powered remote endpoints\u003c\/li\u003e\n\u003cli\u003eDigital signage displays receiving content from a remote media player or encoder\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHDMI-TPX-RX106 (91580001)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 HDBaseT Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT Input\u003c\/td\u003e\n\u003ctd\u003e1x RJ45 (Cat6A \/ Cat7)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Output\u003c\/td\u003e\n\u003ctd\u003e1x HDMI 2.0 (up to 4K@60Hz 4:2:0 \/ 1080p 4:4:4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Extension Distance\u003c\/td\u003e\n\u003ctd\u003e100m at 1080p; up to 70m at 4K@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Extension\u003c\/td\u003e\n\u003ctd\u003eUSB HID return path (keyboard and mouse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial Control\u003c\/td\u003e\n\u003ctd\u003eRS-232 bidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Control\u003c\/td\u003e\n\u003ctd\u003eBidirectional IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Input\u003c\/td\u003e\n\u003ctd\u003ePoH from transmitter (no local PSU required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePairing\u003c\/td\u003e\n\u003ctd\u003eHDMI-TPX-TX106 (91580002)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eLightware Visual Engineering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91580001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPX-RX106\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Version Out\u003c\/td\u003e\n\u003ctd\u003e2.0 (4K@60Hz 4:2:0)\u003c\/td\u003e\n\u003ctd\u003e2.0 (4K@60Hz 4:4:4)\u003c\/td\u003e\n\u003ctd\u003e2.0 (4K@60Hz 4:2:0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100m (1080p), ~70m (4K)\u003c\/td\u003e\n\u003ctd\u003e90m (4K), 100m (1080p)\u003c\/td\u003e\n\u003ctd\u003e70m (4K), 100m (1080p)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB HID Return\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232\u003c\/td\u003e\n\u003ctd\u003eYes — bidirectional\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Control\u003c\/td\u003e\n\u003ctd\u003eYes — bidirectional\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoH Powered\u003c\/td\u003e\n\u003ctd\u003eYes — from TX106 transmitter\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo — local PSU required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Switcher Compatible\u003c\/td\u003e\n\u003ctd\u003eNo — point-to-point AVX\u003c\/td\u003e\n\u003ctd\u003eYes — DM matrix compatible\u003c\/td\u003e\n\u003ctd\u003eStandalone only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eDoes the HDMI-TPX-RX106 need its own power supply?\u003c\/dt\u003e\n\u003cdd\u003eNo. When paired with the HDMI-TPX-TX106 transmitter, the receiver is powered over the HDBaseT Cat cable via Power over HDBaseT (PoH). No local power supply is required at the receiver\/display end, which simplifies ceiling and wall mount installations.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable is required between the transmitter and receiver?\u003c\/dt\u003e\n\u003cdd\u003eCat6A is the recommended minimum for 4K and full 100-meter runs. Cat7 is also supported. Standard Cat5e or Cat6 may work at shorter distances and lower resolutions but is not recommended for 4K or full-distance HDBaseT. Use shielded cable (STP\/FTP) in environments with significant electrical interference.\u003c\/dd\u003e\n\u003cdt\u003eCan the receiver output 4K@60Hz at 100 meters?\u003c\/dt\u003e\n\u003cdd\u003eAt 4K@60Hz (4:2:0), the maximum extension is approximately 70 meters on Cat6A, not 100 meters. The 100-meter specification applies to 1080p signals. For 4K at maximum distance, consult \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e to confirm with your specific cable plant.\u003c\/dd\u003e\n\u003cdt\u003eDoes the receiver support HDCP 2.2 for 4K copy-protected content?\u003c\/dt\u003e\n\u003cdd\u003eYes. The HDMI-TPX-RX106 is HDCP 2.2 compliant and will pass 4K protected content from compatible sources to HDCP 2.2 displays.\u003c\/dd\u003e\n\u003cdt\u003eCan the USB HID extension be used for keyboard and mouse at the display location?\u003c\/dt\u003e\n\u003cdd\u003eYes. The receiver includes USB HID pass-through, allowing a keyboard and mouse connected at the display (receiver) end to control the computer at the source (transmitter) end. This enables KVM-style operation over a single HDBaseT cable run.\u003c\/dd\u003e\n\u003cdt\u003eIs the HDMI-TPX-RX106 compatible with any HDBaseT transmitter, or only the TX106?\u003c\/dt\u003e\n\u003cdd\u003eIt is designed and validated to work with the Lightware HDMI-TPX-TX106. HDBaseT is a standard protocol, but interoperability with third-party transmitters is not guaranteed. Contact \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e before attempting non-Lightware pairings.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43971831005420,"sku":"91580001","price":907.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx106-avx-non-switchable-hdmi-2-0-extender-91580001-creation-networks-43268.jpg?v=1757925260"},{"product_id":"lightware-hdmi-tpx-tx106-avx-non-switchable-hdmi-2-0-extender-91580002","title":"Lightware HDMI-TPX-TX106 AVX (non-switchable) HDMI 2.0 extender - 91580002","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPX-TX106 is an HDMI 2.0 HDBaseT transmitter that extends HDMI 2.0 signals, USB, RS-232, and IR up to 100 meters over a single Cat6A or Cat7 cable. Designed as a non-switchable (AVX) extender, it is the transmit-side unit for point-to-point HDBaseT links between a source location and a remote display or AV endpoint. Part of the Lightware VINX TPX system, it pairs with the HDMI-TPX-RX106 receiver. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-tx106-avx-non-switchable-hdmi-2-0-extender-91580002-creation-networks-12399.jpg?v=1757925261\" alt=\"Lightware HDMI-TPX-TX106 HDMI 2.0 TPX transmitter\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eHDBaseT is the industry standard for extending HDMI over structured Cat cable, and the HDMI-TPX-TX106 implements it for HDMI 2.0 sources. At the source location, this transmitter unit accepts an HDMI 2.0 input, encodes it for HDBaseT transmission, and sends it over a single Cat6A or Cat7 cable to the HDMI-TPX-RX106 receiver at the display. USB HID (keyboard and mouse), RS-232, and IR signals travel on the same cable in both directions — the transmitter handles both outbound video and inbound control signals. The non-switchable (AVX) designation means this is a dedicated point-to-point extender without built-in matrix switching, appropriate for fixed single-source to single-display runs in conference rooms, classrooms, and distributed display systems. Power over HDBaseT (PoH) is supported, allowing the transmitter to power the receiver over the Cat cable where required.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHDMI 2.0 input up to 4K@60Hz (4:2:0) and 1080p@60Hz (4:4:4)\u003c\/li\u003e\n\u003cli\u003eHDBaseT extension up to 100 meters over Cat6A or Cat7\u003c\/li\u003e\n\u003cli\u003eUSB HID (keyboard and mouse) extension over HDBaseT\u003c\/li\u003e\n\u003cli\u003eBidirectional RS-232 serial control\u003c\/li\u003e\n\u003cli\u003eBidirectional IR control\u003c\/li\u003e\n\u003cli\u003ePower over HDBaseT (PoH) — can power the paired receiver\u003c\/li\u003e\n\u003cli\u003ePoE input — transmitter can be powered from the network switch\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant\u003c\/li\u003e\n\u003cli\u003ePairs with HDMI-TPX-RX106 receiver\u003c\/li\u003e\n\u003cli\u003eCompact form factor for table-top, wall, or rack shelf mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room AV — extending laptop or PC HDMI from a table connection to a wall-mounted display over structured Cat cabling\u003c\/li\u003e\n\u003cli\u003eClassroom AV — connecting teacher workstation to projector or interactive display over existing Cat infrastructure\u003c\/li\u003e\n\u003cli\u003eBoardroom AV — fixed single-source HDMI extension for primary display with USB KVM at the presenter location\u003c\/li\u003e\n\u003cli\u003eDistributed display systems with fixed source-to-display assignments requiring HDMI 2.0 over Cat cable\u003c\/li\u003e\n\u003cli\u003eHospitality and hotel meeting rooms with in-wall Cat structured cabling connecting to ceiling or wall displays\u003c\/li\u003e\n\u003cli\u003eRetail digital signage with a media player at a remote location connected to a display over Cat cabling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHDMI-TPX-TX106 (91580002)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 HDBaseT Transmitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Input\u003c\/td\u003e\n\u003ctd\u003e1x HDMI 2.0 (up to 4K@60Hz 4:2:0 \/ 1080p 4:4:4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT Output\u003c\/td\u003e\n\u003ctd\u003e1x RJ45 (Cat6A \/ Cat7)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Extension Distance\u003c\/td\u003e\n\u003ctd\u003e100m at 1080p; up to 70m at 4K@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Extension\u003c\/td\u003e\n\u003ctd\u003eUSB HID (keyboard and mouse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial Control\u003c\/td\u003e\n\u003ctd\u003eRS-232 bidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Control\u003c\/td\u003e\n\u003ctd\u003eBidirectional IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower over HDBaseT\u003c\/td\u003e\n\u003ctd\u003eYes (PoH) — powers receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Input\u003c\/td\u003e\n\u003ctd\u003eYes (IEEE 802.3at)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePairing\u003c\/td\u003e\n\u003ctd\u003eHDMI-TPX-RX106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eLightware Visual Engineering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91580002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPX-TX106\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Version\u003c\/td\u003e\n\u003ctd\u003e2.0 (4K@60Hz 4:2:0)\u003c\/td\u003e\n\u003ctd\u003e2.0 (4K@60Hz 4:4:4)\u003c\/td\u003e\n\u003ctd\u003e2.0 (4K@60Hz 4:2:0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT Extension\u003c\/td\u003e\n\u003ctd\u003eUp to 100m (1080p)\u003c\/td\u003e\n\u003ctd\u003eUp to 90m (4K), 100m (1080p)\u003c\/td\u003e\n\u003ctd\u003eUp to 70m (4K), 100m (1080p)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB HID Extension\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 \/ IR\u003c\/td\u003e\n\u003ctd\u003eBoth, bidirectional\u003c\/td\u003e\n\u003ctd\u003eBoth\u003c\/td\u003e\n\u003ctd\u003eIR only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Input\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo — external PSU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoH Output\u003c\/td\u003e\n\u003ctd\u003eYes — powers receiver\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching \/ Matrix\u003c\/td\u003e\n\u003ctd\u003eNone — point-to-point extender\u003c\/td\u003e\n\u003ctd\u003eCompatible with DM matrix\u003c\/td\u003e\n\u003ctd\u003eStandalone extender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat receiver does the HDMI-TPX-TX106 pair with?\u003c\/dt\u003e\n\u003cdd\u003eThe HDMI-TPX-TX106 pairs with the Lightware HDMI-TPX-RX106 receiver (91580001), sold separately. Both units must be used together for a complete HDBaseT extension link.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable is required between the transmitter and receiver?\u003c\/dt\u003e\n\u003cdd\u003eCat6A or Cat7 is recommended for reliable 4K and long-distance operation. Cat6 may work at shorter distances and lower resolutions but is not recommended for 4K@60Hz at full extension distance. Use a shielded cable (STP\/FTP) in electrically noisy environments.\u003c\/dd\u003e\n\u003cdt\u003eCan the transmitter power the receiver, or does the receiver need its own power supply?\u003c\/dt\u003e\n\u003cdd\u003eYes. The transmitter supports Power over HDBaseT (PoH) and can power the HDMI-TPX-RX106 receiver over the Cat cable, eliminating the need for a separate power supply at the receiver end. The transmitter itself can be PoE-powered from a PoE switch.\u003c\/dd\u003e\n\u003cdt\u003eDoes the extender support 4K@60Hz at full 100-meter distance?\u003c\/dt\u003e\n\u003cdd\u003eAt 4K@60Hz (4:2:0), the maximum recommended extension distance is shorter than 100 meters — typically up to 70 meters depending on cable quality. 100-meter extension applies to 1080p signals. Contact \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e for distance planning specific to your resolution and cable run.\u003c\/dd\u003e\n\u003cdt\u003eIs this extender compatible with a Lightware matrix switcher?\u003c\/dt\u003e\n\u003cdd\u003eThe HDMI-TPX-TX106 is designated as AVX (non-switchable), meaning it is designed for fixed point-to-point extension rather than connection to a matrix switcher. For matrix-connected HDBaseT extension, consult Creation Networks for the appropriate Lightware matrix-compatible transmitter.\u003c\/dd\u003e\n\u003cdt\u003eDoes it support HDCP 2.2 for 4K protected content?\u003c\/dt\u003e\n\u003cdd\u003eYes. The HDMI-TPX-TX106 is HDCP 2.2 compliant and will pass 4K protected content from supported sources to HDCP 2.2-compliant displays.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43971841294572,"sku":"91580002","price":907.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-tx106-avx-non-switchable-hdmi-2-0-extender-91580002-creation-networks-12399.jpg?v=1757925261"},{"product_id":"lightware-hdmi-tpx-rx107-avx-non-switchable-hdmi-2-0-extender-91580004","title":"Lightware HDMI-TPX-RX107 AVX (non-switchable) HDMI 2.0 extender - 91580004","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPX-RX107 is an HDMI 2.0 TPX receiver in the AVX (non-switchable) configuration. It receives 4K HDMI 2.0 signals transmitted over twisted-pair Cat cabling from a compatible Lightware TPX transmitter and outputs the signal locally via HDMI to a connected display, projector, or monitor. As the display-end unit of the Lightware TPX extension pair, the RX107 completes the point-to-point HDMI extension system alongside the HDMI-TPX-TX107 transmitter.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx107-avx-non-switchable-hdmi-2-0-extender-91580004-creation-networks-78003.jpg?v=1757925262\" alt=\"Lightware HDMI-TPX-RX107 HDMI 2.0 TPX Receiver\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eInstalled at the display location — whether behind a wall-mounted screen, in a ceiling above a projector, or within an AV rack at the room’s far end — the RX107 receives the TPX-encoded signal from the transmitter and converts it back to a standard HDMI 2.0 output. It supports 4K resolution with HDR and HDCP 2.2, ensuring full compatibility with protected 4K content. The non-switchable design keeps the unit straightforward to install and operate without requiring routing configuration. The RX107 is compatible with the full Lightware TPX transmitter ecosystem, including matrix-based deployments where receivers are distributed across a space and the source selection is handled at a central switching point.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHDMI 2.0 output at the display end (4K\/60Hz, HDR)\u003c\/li\u003e\n\u003cli\u003eReceives TPX twisted-pair signal from Lightware TPX transmitters\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant\u003c\/li\u003e\n\u003cli\u003eNon-switchable (AVX) — dedicated point-to-point receiver\u003c\/li\u003e\n\u003cli\u003eCompact form factor for behind-display or ceiling installation\u003c\/li\u003e\n\u003cli\u003eCompatible with Lightware HDMI-TPX-TX107 and TPX transmitter ecosystem\u003c\/li\u003e\n\u003cli\u003ePlug-and-play receiver operation\u003c\/li\u003e\n\u003cli\u003eSupports HDMI embedded audio pass-through to display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCorporate boardrooms: receiving 4K signal at wall-mounted display from remote transmitter\u003c\/li\u003e\n\u003cli\u003eUniversity lecture halls: projector-end receiver for 4K source extension\u003c\/li\u003e\n\u003cli\u003eHotel conference rooms: display-side unit behind ceiling or wall-mounted screens\u003c\/li\u003e\n\u003cli\u003eHuddle rooms: compact receiver behind small-format displays\u003c\/li\u003e\n\u003cli\u003eDigital signage: display-end unit for 4K content delivery\u003c\/li\u003e\n\u003cli\u003eMulti-room AV distribution with central matrix and distributed receivers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHDMI-TPX-RX107\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91580004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 TPX Receiver (AVX, non-switchable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Output\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (4K\/60Hz, HDR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio\u003c\/td\u003e\n\u003ctd\u003eHDMI embedded audio pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Technology\u003c\/td\u003e\n\u003ctd\u003eTwisted-pair (TPX) receive, over Cat5e\/6\/7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP Support\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Distance\u003c\/td\u003e\n\u003ctd\u003eUp to 100m typical over Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Transmitters\u003c\/td\u003e\n\u003ctd\u003eLightware HDMI-TPX-TX107 and TPX transmitter ecosystem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eLightware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPX-RX107\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Standard\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0, 4K\/60Hz, HDR\u003c\/td\u003e\n\u003ctd\u003eHDMI 4K\/60 with HDR\u003c\/td\u003e\n\u003ctd\u003eHDMI 4K60 HDR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP Support\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Output\u003c\/td\u003e\n\u003ctd\u003eHDMI embedded audio pass-through to display\u003c\/td\u003e\n\u003ctd\u003eAudio de-embedding to analog outputs at receiver\u003c\/td\u003e\n\u003ctd\u003eAudio de-embedding and analog output at receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Protocol\u003c\/td\u003e\n\u003ctd\u003eLightware TPX\u003c\/td\u003e\n\u003ctd\u003eExtron DTP (proprietary)\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmitter Compatibility\u003c\/td\u003e\n\u003ctd\u003eLightware TPX transmitters only\u003c\/td\u003e\n\u003ctd\u003eExtron DTP transmitters only\u003c\/td\u003e\n\u003ctd\u003eKramer HDBaseT transmitters; some cross-brand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232\/IR Pass-Through\u003c\/td\u003e\n\u003ctd\u003eCheck Lightware TPX specifications\u003c\/td\u003e\n\u003ctd\u003eRS-232 and IR pass-through included\u003c\/td\u003e\n\u003ctd\u003eRS-232 and IR pass-through included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Form Factor\u003c\/td\u003e\n\u003ctd\u003eCompact — suited for behind-display mounting\u003c\/td\u003e\n\u003ctd\u003eCompact receiver\u003c\/td\u003e\n\u003ctd\u003eCompact receiver, includes mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the RX107 work with any TPX transmitter from Lightware, or only the TX107?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe RX107 is compatible with Lightware TPX transmitters within the same product family. It pairs directly with the HDMI-TPX-TX107 and is also compatible with compatible Lightware matrix systems using TPX outputs. It does not work with TPX transmitters from other manufacturers.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs the RX107 powered locally or via the twisted-pair cable?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePower delivery method (local or PoE from the transmitter\/cable) should be verified in the Lightware datasheet. Contact \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e for clarification if your installation constrains how the receiver can be powered.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I mount this unit directly behind a flat-panel display?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The compact form factor is designed for behind-display installation. Ensure adequate ventilation and verify mounting compatibility with the specific display enclosure.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the receiver support EDID management?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eEDID management is part of the Lightware TPX ecosystem. The receiver reads the display's EDID and communicates it through the system. Advanced EDID management may be available through Lightware system configuration tools.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat cable type is recommended for 4K performance over maximum distance?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCat6 or Cat7 is recommended for 4K signal transmission at maximum extension distances. Cat5e may limit distance at 4K resolutions. Always use quality cable with proper terminations.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase the HDMI-TPX-RX107?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAvailable at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. We stock the full Lightware TPX line and can provide a complete transmitter\/receiver system quote.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973487427820,"sku":"91580004","price":1188.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx107-avx-non-switchable-hdmi-2-0-extender-91580004-creation-networks-78003.jpg?v=1757925262"},{"product_id":"lightware-hdmi-tpx-tx107-avx-non-switchable-hdmi-2-0-extender-91580005","title":"Lightware HDMI-TPX-TX107 AVX (non-switchable) HDMI 2.0 extender - 91580005","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPX-TX107 is an HDMI 2.0 TPX transmitter in the AVX (non-switchable) configuration. It transmits 4K HDMI 2.0 signals over twisted-pair Cat cabling to compatible Lightware TPX receivers, enabling professional HDMI extension in corporate, educational, and installation AV environments. Unlike the TX106A, the TX107 does not include analog audio embedding — it is a clean, direct HDMI 2.0 signal extender for installations where audio routing is handled separately or entirely within the HDMI signal path.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-tx107-avx-non-switchable-hdmi-2-0-extender-91580005-creation-networks-72128.jpg?v=1757925263\" alt=\"Lightware HDMI-TPX-TX107 HDMI 2.0 TPX Transmitter\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe TX107 transmits HDMI 2.0 video and embedded audio over a single Cat5e\/6\/7 cable run to a Lightware TPX receiver. Supporting 4K resolution with HDR and HDCP 2.2, it is suited for installations that require full 4K content protection compliance alongside high-bandwidth video. The non-switchable design means it operates as a dedicated point-to-point transmitter, making it straightforward to deploy in fixed installations without the overhead of switching configuration. It integrates into the Lightware TPX ecosystem, pairing with receivers such as the HDMI-TPX-RX107 and compatible Lightware matrix systems.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHDMI 2.0 input with 4K\/60Hz and HDR support\u003c\/li\u003e\n\u003cli\u003eTPX twisted-pair transmission over Cat5e\/6\/7\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant\u003c\/li\u003e\n\u003cli\u003eEmbedded HDMI audio transmission (no analog audio embedding)\u003c\/li\u003e\n\u003cli\u003eNon-switchable (AVX) — dedicated point-to-point transmitter\u003c\/li\u003e\n\u003cli\u003eCompatible with Lightware HDMI-TPX-RX107 and TPX receivers\u003c\/li\u003e\n\u003cli\u003eCompact source-end form factor\u003c\/li\u003e\n\u003cli\u003ePlug-and-play HDMI extension\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCorporate boardrooms: 4K laptop or PC extension to wall-mounted displays\u003c\/li\u003e\n\u003cli\u003eEducational lecture theatres: extending 4K source signals to remote projectors\u003c\/li\u003e\n\u003cli\u003eHotel meeting rooms with Cat infrastructure and ceiling or wall-mounted displays\u003c\/li\u003e\n\u003cli\u003eHuddle spaces with table-mounted HDMI connection points\u003c\/li\u003e\n\u003cli\u003eDigital signage with 4K media players at distance from displays\u003c\/li\u003e\n\u003cli\u003eFixed AV installations replacing long HDMI cable runs with Cat cabling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHDMI-TPX-TX107\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91580005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 TPX Transmitter (AVX, non-switchable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (4K\/60Hz, HDR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio\u003c\/td\u003e\n\u003ctd\u003eHDMI embedded audio (no analog embedding)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Technology\u003c\/td\u003e\n\u003ctd\u003eTwisted-pair (TPX) over Cat5e\/6\/7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP Support\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Distance\u003c\/td\u003e\n\u003ctd\u003eUp to 100m typical over Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Receivers\u003c\/td\u003e\n\u003ctd\u003eLightware HDMI-TPX-RX107 and TPX ecosystem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eLightware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPX-TX107\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Standard\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0, 4K\/60Hz, HDR\u003c\/td\u003e\n\u003ctd\u003eHDMI 4K60 4:4:4 HDR\u003c\/td\u003e\n\u003ctd\u003eHDMI 4K60 HDR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP Support\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Embedding\u003c\/td\u003e\n\u003ctd\u003eHDMI embedded audio only — clean signal path\u003c\/td\u003e\n\u003ctd\u003eAudio de-embedding at receiver end\u003c\/td\u003e\n\u003ctd\u003eAudio de-embedding\/embedding at receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Protocol\u003c\/td\u003e\n\u003ctd\u003eLightware TPX\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (DM Lite)\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceiver Compatibility\u003c\/td\u003e\n\u003ctd\u003eLightware TPX receivers only\u003c\/td\u003e\n\u003ctd\u003eCrestron DM Lite receivers only\u003c\/td\u003e\n\u003ctd\u003eKramer HDBaseT receivers; some cross-brand possible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl System Integration\u003c\/td\u003e\n\u003ctd\u003eLightware API; no mandatory control system\u003c\/td\u003e\n\u003ctd\u003eOptimized for Crestron control\u003c\/td\u003e\n\u003ctd\u003eWorks standalone; Kramer control optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Simplicity\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play; no mandatory programming\u003c\/td\u003e\n\u003ctd\u003eMay require Crestron programming for full feature use\u003c\/td\u003e\n\u003ctd\u003eStraightforward installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the difference between the TX107 and the TX106A?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe TX106A includes analog audio embedding, allowing an external analog audio signal to be added to the HDMI output at the transmitter. The TX107 passes only the audio embedded in the HDMI source signal. Choose the TX107 when all audio is already embedded in the HDMI signal.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the TX107 work with the HDMI-TPX-RX107 receiver?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The TX107 and RX107 are the transmitter and receiver pair in the same TPX product family, designed to work together as a complete extension system.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use standard Cat5e cabling with this transmitter?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Cat5e is supported, though Cat6 or Cat7 is recommended for maximum distance and performance. Verify cable quality and installation standards for best results.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs EDID management included?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eEDID handling is part of the Lightware TPX ecosystem. Contact \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e for EDID management details specific to this model.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the maximum transmission distance?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eTypical maximum extension distance is up to 100m over Cat6. Refer to Lightware's TPX specification sheet for distance ratings by cable category.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I buy the HDMI-TPX-TX107?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAvailable at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. Our team can assist with full TPX system design including transmitters, receivers, and supporting infrastructure.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973488509164,"sku":"91580005","price":1188.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-tx107-avx-non-switchable-hdmi-2-0-extender-91580005-creation-networks-72128.jpg?v=1757925263"},{"product_id":"lightware-hdmi-tpx-tx106a-avx-non-switchable-hdmi-2-0-extender-91580003","title":"Lightware HDMI-TPX-TX106A AVX (non-switchable) HDMI 2.0 extender - 91580003","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPX-TX106A is an HDMI 2.0 TPX transmitter in the AVX (non-switchable) configuration, designed to extend HDMI 2.0 signals over twisted-pair cabling to compatible Lightware TPX receivers. It accepts an HDMI 2.0 source and transmits the signal over a single Cat cable, delivering 4K resolution with HDR and HDCP 2.2 support to a remote display location. The non-switchable AVX designation indicates this is a dedicated point-to-point extender without local switching capability.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-tx106a-avx-non-switchable-hdmi-2-0-extender-91580003-creation-networks-82613.jpg?v=1757925264\" alt=\"Lightware HDMI-TPX-TX106A HDMI 2.0 TPX Transmitter\" style=\"max-width:100%;height:auto;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-tx106a-avx-non-switchable-hdmi-2-0-extender-91580003-creation-networks-38487.jpg?v=1757925265\" alt=\"Lightware HDMI-TPX-TX106A rear connections\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe TPX product line from Lightware uses twisted-pair extension technology to bridge HDMI 2.0 sources and displays over distances that exceed the practical limits of standard HDMI cables. The TX106A variant includes analog audio embedding capability alongside video transmission, making it suitable for installations where audio from a separate analog source must be combined with the HDMI signal before extension. HDCP 2.2 support ensures compatibility with protected 4K content from Blu-ray players, streaming devices, and secured media servers. The unit integrates into Lightware's TPX ecosystem and is compatible with Lightware's receiver and matrix products in the same line.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHDMI 2.0 input with 4K\/60Hz support\u003c\/li\u003e\n\u003cli\u003eTPX twisted-pair transmission (Cat5e\/6\/7)\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant for protected 4K content\u003c\/li\u003e\n\u003cli\u003eAnalog audio embedding — adds audio to HDMI signal at transmitter\u003c\/li\u003e\n\u003cli\u003eNon-switchable (AVX) — dedicated point-to-point transmitter\u003c\/li\u003e\n\u003cli\u003eCompatible with Lightware TPX receiver and matrix products\u003c\/li\u003e\n\u003cli\u003eCompact form factor for source-end installation\u003c\/li\u003e\n\u003cli\u003eSupports HDR signal transmission\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCorporate boardrooms: extending 4K laptop or PC output over existing Cat cabling to displays\u003c\/li\u003e\n\u003cli\u003eUniversity lecture theatres: distributing 4K source signals to projectors or displays at distance\u003c\/li\u003e\n\u003cli\u003eHotel meeting rooms with in-wall Cat infrastructure and ceiling-mount displays\u003c\/li\u003e\n\u003cli\u003eDigital signage: transmitting 4K content from media players to remote displays\u003c\/li\u003e\n\u003cli\u003eHuddle rooms with under-table connection points requiring extension to wall-mounted screens\u003c\/li\u003e\n\u003cli\u003eBroadcast and production monitoring: extending 4K sources to remote monitor positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHDMI-TPX-TX106A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91580003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 TPX Transmitter (AVX, non-switchable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (4K\/60Hz, HDR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Technology\u003c\/td\u003e\n\u003ctd\u003eTwisted-pair (TPX) over Cat5e\/6\/7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP Support\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio\u003c\/td\u003e\n\u003ctd\u003eAnalog audio embedding at transmitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Distance\u003c\/td\u003e\n\u003ctd\u003ePer Lightware TPX specification (up to 100m typical over Cat6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Receivers\u003c\/td\u003e\n\u003ctd\u003eLightware TPX receiver and matrix products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eLightware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPX-TX106A\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Standard\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0, 4K\/60Hz, HDR\u003c\/td\u003e\n\u003ctd\u003eHDMI 4K60 4:4:4 HDR\u003c\/td\u003e\n\u003ctd\u003eHDMI 4K\/60 with HDR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP Support\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Embedding\u003c\/td\u003e\n\u003ctd\u003eAnalog audio embedding at TX — flexible for separate audio sources\u003c\/td\u003e\n\u003ctd\u003eAudio handled at receiver\/processing end\u003c\/td\u003e\n\u003ctd\u003eAudio de-embedding at receiver; TX is signal-only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Cable\u003c\/td\u003e\n\u003ctd\u003eCat5e\/6\/7 twisted-pair\u003c\/td\u003e\n\u003ctd\u003eCat cable (HDBaseT protocol)\u003c\/td\u003e\n\u003ctd\u003eShielded twisted-pair (DTP protocol)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEcosystem Integration\u003c\/td\u003e\n\u003ctd\u003eLightware TPX — pairs with Lightware receivers and matrices\u003c\/td\u003e\n\u003ctd\u003eCrestron DM Lite ecosystem — Crestron control preferred\u003c\/td\u003e\n\u003ctd\u003eExtron DTP — works within Extron product line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl System Requirements\u003c\/td\u003e\n\u003ctd\u003eNo mandatory control system; standalone operation\u003c\/td\u003e\n\u003ctd\u003eWorks standalone but optimized with Crestron control\u003c\/td\u003e\n\u003ctd\u003eStandalone operation; Extron control optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePricing Position\u003c\/td\u003e\n\u003ctd\u003eMid-tier professional AV\u003c\/td\u003e\n\u003ctd\u003eHigher — Crestron premium pricing\u003c\/td\u003e\n\u003ctd\u003eMid-tier — comparable to Lightware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the difference between the TX106A and the TX107 models?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe TX106A includes analog audio embedding capability, allowing a separate analog audio signal to be combined with the HDMI video at the transmitter. The TX107 is a transmitter without this audio embedding feature. Choose the TX106A when you need to add analog audio to the signal chain at the source end.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes this transmitter require a Lightware receiver at the other end?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The HDMI-TPX-TX106A is designed to work with compatible Lightware TPX receivers. It is not compatible with HDBaseT receivers from other manufacturers.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the maximum extension distance?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eLightware specifies extension distance based on cable category. Typical maximum is up to 100m over Cat6. Refer to the Lightware TPX datasheet for precise distance specifications by cable type.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs EDID management supported?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eEDID management capabilities are part of the Lightware TPX ecosystem. Contact \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e for specific EDID handling details for this model.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan this unit be used with 1080p sources?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The HDMI-TPX-TX106A is backward compatible with 1080p and lower resolution sources. HDMI 2.0 support includes 1080p, 4K, and intermediate resolutions.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase this transmitter?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe HDMI-TPX-TX106A is available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. Our team can help design a complete TPX extension or distribution system.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973489590508,"sku":"91580003","price":1237.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-tx106a-avx-non-switchable-hdmi-2-0-extender-91580003-creation-networks-82613.jpg?v=1757925264"},{"product_id":"lightware-hdmi-tpx-tx209ak-avx-non-switchable-hdmi-2-0-extender-91580007","title":"Lightware HDMI-TPX-TX209AK AVX (non-switchable) HDMI 2.0 extender - 91580007","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPX-TX209AK is an HDMI 2.0 TPX extender transmitter that encodes a 4K60 4:4:4 HDMI source signal and sends it over a single CATx cable to the HDMI-TPX-RX209AK receiver at the display location. As part of Lightware's non-switchable AVX extender family, it is purpose-designed for fixed point-to-point installations in conference rooms, classrooms, digital signage deployments, and any permanent commercial AV setup where a single HDMI 2.0 source needs to drive a remote display over existing CATx infrastructure.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe HDMI-TPX-TX209AK accepts HDMI 2.0 input from a source device and encodes it using Lightware's TPX protocol for transmission over a single Cat5e or Cat6 structured cable. It delivers full 18 Gbps HDMI 2.0 bandwidth, supporting 4K60 4:4:4, HDR10, and HDCP 2.2 end-to-end, ensuring both signal fidelity and content protection compliance. The transmitter provides Power over the TPX link to power the connected receiver, so no separate power supply is required at the remote display location.\u003c\/p\u003e\u003cp\u003eRS-232 and IR control signals pass through the TPX link, allowing the display connected at the receiver end to be controlled from the source location or a central control system. Ethernet is also extended over the cable, providing a network connection point at the transmitter for integration with room control infrastructure. EDID emulation is managed at the transmitter, presenting a consistent display capability profile to the source device to prevent plug-and-display handshake failures. The LW3 control protocol enables remote configuration and integration with Crestron, AMX, Extron, and other third-party control platforms.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-tx209ak-avx-non-switchable-hdmi-2-0-extender-91580007-creation-networks-98674.jpg?v=1757925266\" alt=\"Lightware HDMI-TPX-TX209AK HDMI 2.0 TPX Extender Transmitter front view\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-tx209ak-avx-non-switchable-hdmi-2-0-extender-91580007-creation-networks-14977.jpg?v=1757925266\" alt=\"Lightware HDMI-TPX-TX209AK rear panel connections\"\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 2.0 Input\u003c\/strong\u003e — Accepts 4K60 4:4:4 at full 18 Gbps from computers, media players, and presentation devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPX Encoding over CATx\u003c\/strong\u003e — Transmits HDMI 2.0 over a single Cat5e or Cat6 cable to the paired receiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.2 Compliant\u003c\/strong\u003e — Supports protected content from Blu-ray, streaming, and secure presentation sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDR10 Pass-through\u003c\/strong\u003e — Carries HDR metadata to compatible displays at the receiver endpoint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower over TPX Link\u003c\/strong\u003e — Powers the connected receiver without a separate power supply at the display location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Extension\u003c\/strong\u003e — Passes control signals bidirectionally over the TPX cable for display management\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet Extension\u003c\/strong\u003e — Extends network connectivity to the transmitter location over the TPX link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — Programmable EDID emulation at the HDMI input for reliable source handshaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLW3 Protocol\u003c\/strong\u003e — Open control protocol for integration with all major AV control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint-to-Point (AVX) Architecture\u003c\/strong\u003e — Fixed, reliable, simplified installation for permanent AV deployments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms extending a fixed laptop dock or media player connection to a wall-mounted display\u003c\/li\u003e\n\u003cli\u003eTraining and classroom environments with a permanent instructor source-to-display cable run\u003c\/li\u003e\n\u003cli\u003eDigital signage networks extending media player output over existing CATx to remote displays\u003c\/li\u003e\n\u003cli\u003eBoardrooms and executive suites with permanent presenter position to display connections\u003c\/li\u003e\n\u003cli\u003eRetail environments sending promotional content from back-room media servers to floor displays\u003c\/li\u003e\n\u003cli\u003eHealthcare and patient care areas with permanent AV connections for educational or wayfinding displays\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Standard\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Resolution\u003c\/td\u003e\n\u003ctd\u003e4K (3840×2160) @ 60 Hz, 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDR Support\u003c\/td\u003e\n\u003ctd\u003eHDR10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Data Rate\u003c\/td\u003e\n\u003ctd\u003e18 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 1.4, HDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio\u003c\/td\u003e\n\u003ctd\u003eHDMI embedded multi-channel audio pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLink Type\u003c\/td\u003e\n\u003ctd\u003eLightware TPX over CATx (Cat5e \/ Cat6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output\u003c\/td\u003e\n\u003ctd\u003ePower over TPX link to receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable emulation at HDMI input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArchitecture\u003c\/td\u003e\n\u003ctd\u003eNon-switchable (AVX) — point-to-point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPX-TX209AK\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 full 18 Gbps HDMI 2.0\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 18 Gbps (paired TX)\u003c\/td\u003e\n\u003ctd\u003e4K60 with bandwidth trade-offs at max range\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0 at maximum range on paired TX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eFull end-to-end HDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eFull HDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2 supported\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2 supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDR Support\u003c\/td\u003e\n\u003ctd\u003eHDR10 pass-through\u003c\/td\u003e\n\u003ctd\u003eHDR10, HDR10+, Dolby Vision on select models\u003c\/td\u003e\n\u003ctd\u003eHDR on select models\u003c\/td\u003e\n\u003ctd\u003eHDR on select models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower to Receiver\u003c\/td\u003e\n\u003ctd\u003eYes — PoTPX powers receiver over CATx\u003c\/td\u003e\n\u003ctd\u003eYes — paired TX powers RX via DM\u003c\/td\u003e\n\u003ctd\u003eYes — PoE on paired DTP TX\u003c\/td\u003e\n\u003ctd\u003eYes — on supported TX\/RX pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Extension\u003c\/td\u003e\n\u003ctd\u003eYes — over TPX cable to transmitter location\u003c\/td\u003e\n\u003ctd\u003eYes via DM cable\u003c\/td\u003e\n\u003ctd\u003eVaries by model\u003c\/td\u003e\n\u003ctd\u003eVaries by model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Pass-through\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eOpen LW3; any control system\u003c\/td\u003e\n\u003ctd\u003ePrimarily Crestron DM ecosystem\u003c\/td\u003e\n\u003ctd\u003eSIS; broad third-party support\u003c\/td\u003e\n\u003ctd\u003eRS-232\/IP; broad third-party support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArchitecture\u003c\/td\u003e\n\u003ctd\u003eFixed point-to-point; simple and reliable\u003c\/td\u003e\n\u003ctd\u003eMatrix-capable in DM ecosystem\u003c\/td\u003e\n\u003ctd\u003eCan tie into Extron DTP CrossPoint matrix\u003c\/td\u003e\n\u003ctd\u003eMatrix-capable in Kramer VS system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhy choose the TPX-TX209AK over a standard HDBaseT transmitter?\u003c\/dt\u003e\n\u003cdd\u003eStandard HDBaseT 1.0 extenders are capped at 10.2 Gbps, which limits 4K output to 4:2:0 chroma subsampling. The Lightware TPX transmitter operates at full HDMI 2.0 bandwidth (18 Gbps), providing true 4K60 4:4:4 without color space compromise — important for high-fidelity displays, simulation, or any application where color accuracy matters.\u003c\/dd\u003e\n\u003cdt\u003eDoes the transmitter power the receiver?\u003c\/dt\u003e\n\u003cdd\u003eYes. The HDMI-TPX-TX209AK delivers Power over the TPX link to the HDMI-TPX-RX209AK receiver, so no separate power supply is needed at the display end of the cable run. The transmitter itself requires a local power source.\u003c\/dd\u003e\n\u003cdt\u003eWhat is the maximum cable length supported?\u003c\/dt\u003e\n\u003cdd\u003eMaximum distance depends on cable category and target resolution. For 4K60 4:4:4 at full bandwidth, shorter runs are required compared to 1080p. Consult Lightware's product datasheet and installation guide for the resolution-to-distance table specific to this extender pair.\u003c\/dd\u003e\n\u003cdt\u003eCan multiple transmitters be used to extend multiple sources independently?\u003c\/dt\u003e\n\u003cdd\u003eYes. Each TX209AK-RX209AK pair is an independent point-to-point extender. Multiple pairs can be deployed across a facility for separate source-to-display runs. For multi-source switching to a single display, or one-to-many distribution, Lightware's UCX Matrix or SW4-TPS-TX240 switcher-transmitter products would be more appropriate.\u003c\/dd\u003e\n\u003cdt\u003eIs the source device aware of the actual connected display?\u003c\/dt\u003e\n\u003cdd\u003eThe EDID emulation at the transmitter input presents a fixed EDID profile to the source device, independent of what is physically connected at the receiver display end. This prevents common issues where a source changes resolution or output mode when the display is powered off or switched.\u003c\/dd\u003e\n\u003cdt\u003eIs this transmitter compatible with 1080p sources or only 4K?\u003c\/dt\u003e\n\u003cdd\u003eThe transmitter accepts HDMI 2.0 signals, which is backward compatible with 1080p and lower-resolution sources. The TPX link carries whatever resolution the source outputs, so the system works with both legacy 1080p content and 4K sources.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the HDMI-TPX-TX209AK?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller for commercial AV extender systems, conference room integration, and digital signage projects.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973491097836,"sku":"91580007","price":1963.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-tx209ak-avx-non-switchable-hdmi-2-0-extender-91580007-creation-networks-98674.jpg?v=1757925266"},{"product_id":"lightware-hdmi-tpx-rx209ak-avx-non-switchable-hdmi-2-0-extender","title":"Lightware HDMI-TPX-RX209AK AVX (non-switchable) HDMI 2.0 extender - 91580006","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPX-RX209AK is a dedicated HDMI 2.0 TPX extender receiver, operating as the display-end unit in a point-to-point AV extension system that transmits 4K60 4:4:4 signals over a single CATx cable. It is a non-switchable extender, meaning it is designed for fixed one-to-one source-to-display runs rather than matrix or switched applications. The TPX technology provides high-bandwidth HDMI 2.0 extension over distances suited to most commercial conference room and meeting space cable runs.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe HDMI-TPX-RX209AK receives the TPX-encoded signal from the HDMI-TPX-TX209AK transmitter and outputs HDMI 2.0 at the connected display. The extender pair supports full 4K60 4:4:4 resolution at 18 Gbps, with HDR10 and HDCP 2.2 compliance, making it a capable link for high-resolution conference room, training room, and digital signage display installations.\u003c\/p\u003e\u003cp\u003eThe receiver integrates RS-232 and IR pass-through for display control, and the Ethernet extension channel provides a network port at the display location without additional cabling. Power over the TPX link eliminates the need for a local power supply at the receiver. The non-switchable AVX architecture — Lightware's term for the dedicated point-to-point configuration — is specifically suited to permanent, fixed installations where signal routing complexity is not required and reliability and simplicity are the primary criteria. EDID management at the receiver and LW3 protocol integration round out the feature set for commercial AV deployment.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx209ak-avx-non-switchable-hdmi-2-0-extender-91580006-creation-networks-28363.jpg?v=1757925267\" alt=\"Lightware HDMI-TPX-RX209AK HDMI 2.0 TPX Extender Receiver front view\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx209ak-avx-non-switchable-hdmi-2-0-extender-91580006-creation-networks-47956.jpg?v=1757925269\" alt=\"Lightware HDMI-TPX-RX209AK rear panel connections\"\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 2.0 Output\u003c\/strong\u003e — Delivers 4K60 4:4:4 at 18 Gbps with HDR10 to connected displays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.2 Compliant\u003c\/strong\u003e — Supports end-to-end content protection for protected source playback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPX Extension over CATx\u003c\/strong\u003e — Receives signal over a single Cat5e or Cat6 cable from the TX209AK transmitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower over TPX Link\u003c\/strong\u003e — Eliminates local power supply requirement at the display end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Pass-through\u003c\/strong\u003e — Passes display control commands bidirectionally over the TPX cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet Extension\u003c\/strong\u003e — Provides a network port at the display location via the TPX link cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — Programmable EDID emulation for consistent source handshaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLW3 Protocol\u003c\/strong\u003e — Open IP control for integration with third-party AV control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Switchable (AVX) Architecture\u003c\/strong\u003e — Fixed point-to-point design for simple, reliable permanent installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms with a fixed source-to-display cable run requiring 4K HDMI 2.0 extension\u003c\/li\u003e\n\u003cli\u003eTraining rooms and classrooms with permanent instructor display connections\u003c\/li\u003e\n\u003cli\u003eDigital signage locations where a media player connects to a remote mounted display\u003c\/li\u003e\n\u003cli\u003eBoardrooms extending HDMI from a fixed podium or table source to a wall-mounted display\u003c\/li\u003e\n\u003cli\u003eRetail environments extending content from back-room media players to floor displays\u003c\/li\u003e\n\u003cli\u003eHealthcare facilities with fixed AV display connections in patient rooms or corridors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Standard\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Resolution\u003c\/td\u003e\n\u003ctd\u003e4K (3840×2160) @ 60 Hz, 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDR Support\u003c\/td\u003e\n\u003ctd\u003eHDR10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Data Rate\u003c\/td\u003e\n\u003ctd\u003e18 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 1.4, HDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio\u003c\/td\u003e\n\u003ctd\u003eHDMI embedded multi-channel audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLink Type\u003c\/td\u003e\n\u003ctd\u003eLightware TPX over CATx (Cat5e \/ Cat6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePower over TPX link from transmitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet (via TPX link)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable emulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArchitecture\u003c\/td\u003e\n\u003ctd\u003eNon-switchable (AVX) — point-to-point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPX-RX209AK\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 18 Gbps full HDMI 2.0\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 18 Gbps\u003c\/td\u003e\n\u003ctd\u003e4K60 with bandwidth trade-offs at max range\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0 at maximum cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eFull HDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eFull HDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2 supported\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2 supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower over Link\u003c\/td\u003e\n\u003ctd\u003ePoTPX — receiver powered from transmitter\u003c\/td\u003e\n\u003ctd\u003ePoE+ receiver powered from transmitter\u003c\/td\u003e\n\u003ctd\u003ePoE receiver powered from transmitter\u003c\/td\u003e\n\u003ctd\u003ePoE on supported configurations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Extension\u003c\/td\u003e\n\u003ctd\u003eYes — network port at display via TPX\u003c\/td\u003e\n\u003ctd\u003eYes via DM cable\u003c\/td\u003e\n\u003ctd\u003eVaries by model\u003c\/td\u003e\n\u003ctd\u003eVaries by model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Pass-through\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eOpen LW3; any control system\u003c\/td\u003e\n\u003ctd\u003eCrestron-centric with DM integration\u003c\/td\u003e\n\u003ctd\u003eSIS; broad third-party support\u003c\/td\u003e\n\u003ctd\u003eRS-232\/IP; broad support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArchitecture\u003c\/td\u003e\n\u003ctd\u003ePoint-to-point (non-switchable) — simple and reliable\u003c\/td\u003e\n\u003ctd\u003eMatrix-capable within Crestron DM system\u003c\/td\u003e\n\u003ctd\u003eCan integrate with Extron DTP CrossPoint matrix\u003c\/td\u003e\n\u003ctd\u003eMatrix-capable within Kramer VS series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable via LW3\u003c\/td\u003e\n\u003ctd\u003eVia Crestron toolbox\u003c\/td\u003e\n\u003ctd\u003eVia Extron SMP\u003c\/td\u003e\n\u003ctd\u003eVia Kramer K-Upload\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat is the difference between the TPX extender and a standard HDBaseT extender?\u003c\/dt\u003e\n\u003cdd\u003eLightware's TPX technology is Lightware's proprietary implementation for extending HDMI 2.0 at full 18 Gbps over CATx cabling. Standard HDBaseT 1.0 is limited to 10.2 Gbps (equivalent to HDMI 1.4), which cannot carry 4K60 4:4:4 without chroma subsampling. The TPX link provides the full HDMI 2.0 bandwidth needed for genuine 4K60 4:4:4 content.\u003c\/dd\u003e\n\u003cdt\u003eWhat does non-switchable (AVX) mean?\u003c\/dt\u003e\n\u003cdd\u003eNon-switchable means this extender pair is a fixed point-to-point connection — one transmitter feeds one receiver, with no matrix switching capability. This makes it simpler and more cost-effective for permanent conference room, classroom, or signage installations where a single source always drives a single display.\u003c\/dd\u003e\n\u003cdt\u003eDoes the receiver need a local power supply?\u003c\/dt\u003e\n\u003cdd\u003eNo. The receiver is powered via the TPX link from the HDMI-TPX-TX209AK transmitter, so no separate power supply is required at the display location.\u003c\/dd\u003e\n\u003cdt\u003eDoes this extender support 4K HDR content?\u003c\/dt\u003e\n\u003cdd\u003eYes. The RX209AK supports HDR10 metadata pass-through alongside 4K60 4:4:4, making it compatible with HDR-capable displays and HDR content from Blu-ray players, streaming devices, and HDR-enabled computers.\u003c\/dd\u003e\n\u003cdt\u003eWhat control system can manage the EDID settings on this receiver?\u003c\/dt\u003e\n\u003cdd\u003eEDID configuration is accessible via the LW3 protocol over IP or RS-232, which is compatible with Crestron, AMX, Extron, Savant, and custom control systems. Lightware's Device Manager software also provides a graphical interface for EDID management.\u003c\/dd\u003e\n\u003cdt\u003eIs a Cat6 cable required, or will Cat5e work?\u003c\/dt\u003e\n\u003cdd\u003eCat5e is sufficient for shorter runs and lower resolutions. For full 4K60 4:4:4 performance at maximum cable distance, Cat6 is recommended. Consult Lightware's installation guide for the specific distance-resolution table for this product.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the HDMI-TPX-RX209AK?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller specializing in commercial AV extender systems, integration, and project support.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973493915884,"sku":"91580006","price":1963.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx209ak-avx-non-switchable-hdmi-2-0-extender-91580006-creation-networks-28363.jpg?v=1757925267"},{"product_id":"lightware-mx2m-4tpx-ob-avx-non-switchable-hdmi-2-0-output-board-91130055","title":"Lightware MX2M-4TPX-OB AVX (non switchable) HDMI 2.0 output board - 91130055","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware MX2M-4TPX-OB is a four-port AVX SDVoE output board for the MX2M modular matrix switcher family, providing four RJ45 TPX outputs compatible with the full range of Lightware TPX receivers and SDVoE-compliant third-party receiver devices. Each port delivers uncompressed HDMI 2.0 video at up to 4096x2048@60Hz 4:4:4 (600 MHz pixel clock), multi-channel audio, RS-232, IR, and Ethernet over a single CAT6A cable at 10GBase-T to distances up to 100 meters. The board features HDCP 2.3 compliance with HDCP 1.4 cross-conversion, hot-swap support, and PoE (IEEE 802.3af) remote powering for connected TPX receiver devices at up to 25.4W per port. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e as a standalone board or as part of a complete MX2M system build.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe MX2M-4TPX-OB installs into the MX2M modular matrix frame and adds four SDVoE-standard TPX outputs to the switching fabric. On each port, the board embeds 8-channel LPCM and IEC 61937 audio formats from the MX2M’s Audio layer into the outgoing TPX stream, enabling the receiving end to decode both video and multi-channel audio from a single CAT6A cable. Command injection for CEC, RS-232, and IR on each port allows control commands to reach connected display-side receiver devices without separate control wiring. The board supports Dolby Vision at low latency (0.08 ms video delay at 1080p60) and is compatible with Christie Terra and other SDVoE ecosystem products.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mx2m-4tpx-ob-avx-non-switchable-hdmi-2-0-output-board-91130055-creation-networks-79650.jpg?v=1757925512\" alt=\"Lightware MX2M-4TPX-OB SDVoE AVX Output Board for MX2M Matrix\"\u003e\u003cp\u003eHot-swap capability allows the board to be inserted or removed from an operating MX2M frame without powering down the system, reducing maintenance risk in live environments. The board is enclosed in 1.5 mm steel and cooled through the MX2M frame’s airflow. The MX2M-4TPX-OB is the output-side counterpart to the MX2M-4TPX-IB, and both boards share the same physical form factor and electrical architecture within the MX2M platform.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x SDVoE TPX Outputs (10GBase-T)\u003c\/strong\u003e — Each RJ45 port delivers video, audio, RS-232, IR, and Ethernet to Lightware TPX receivers and SDVoE-compliant third-party display endpoints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K60 4:4:4 at up to 100m\u003c\/strong\u003e — Supports 4096x2048@60Hz 4:4:4 and 3840x2160@60Hz 4:4:4 over CAT6A to 100 meters per port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.3 with 1.4 Cross-Conversion\u003c\/strong\u003e — Manages HDCP 2.3 and HDCP 1.4 in mixed-device environments with automatic format cross-conversion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Remote Powering at 25.4W per Port\u003c\/strong\u003e — Powers connected TPX receivers over the CAT6A cable; no separate power supply at the receiver end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Embedding from MX2M Audio Layer\u003c\/strong\u003e — Embeds 8-channel LPCM and IEC 61937 audio formats from the MX2M audio switching fabric into each output stream.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess than 0.1 ms Signal Latency\u003c\/strong\u003e — 0.08 ms video delay at 1080p60; appropriate for live production monitoring and real-time switching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDolby Vision Support\u003c\/strong\u003e — Low-latency Dolby Vision pass-through in the HDMI 2.0 output stream.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot-Swap Support\u003c\/strong\u003e — Board insertable and removable from a live MX2M frame without system shutdown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCEC, RS-232, and IR Command Injection\u003c\/strong\u003e — Control signals reach display-side devices over the same CAT6A link as video.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep Color Support\u003c\/strong\u003e — 24, 30, and 36-bit RGB and YCbCr 4:4:4 output across all ports.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroadcast studio multi-output distribution from MX2M matrix\u003c\/li\u003e\n\u003cli\u003eBoardroom and conference room multi-display routing\u003c\/li\u003e\n\u003cli\u003eAuditorium and large venue display distribution infrastructure\u003c\/li\u003e\n\u003cli\u003eGovernment space AV output routing via MX2M\u003c\/li\u003e\n\u003cli\u003eTraining room distributed display endpoints\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e91130055\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Frame\u003c\/td\u003e\n\u003ctd\u003eMX2M modular matrix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Ports\u003c\/td\u003e\n\u003ctd\u003e4x RJ45 (10GBase-T AVX\/SDVoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.3 and HDCP 1.4 with cross-conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransferred Signals\u003c\/td\u003e\n\u003ctd\u003eVideo, Audio, RS-232, Infrared, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Space\u003c\/td\u003e\n\u003ctd\u003eRGB, YCbCr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution (8-bit)\u003c\/td\u003e\n\u003ctd\u003e4096x2048@60Hz 4:4:4; 3840x2160@60Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Delay\u003c\/td\u003e\n\u003ctd\u003e0.08 ms (1080p60)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Formats\u003c\/td\u003e\n\u003ctd\u003e8-ch PCM, DSD, Dolby Atmos, Dolby TrueHD, DTS-HD, AC-3, DTS, Dolby Digital Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3af; 25.4W per port output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHot-Swap\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003e1.5 mm steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e195.5 x 219.5 x 41.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eThrough MX2M frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUL, CE; IEC\/EN 55032; IEC\/EN 55035; RoHS EN 63000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware MX2M-4TPX-OB\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron XTP T UWP 302\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eModular matrix output board (4 ports)\u003c\/td\u003e\n\u003ctd\u003eStandalone HDBaseT receiver\u003c\/td\u003e\n\u003ctd\u003eStandalone HDBaseT wall-plate TX\u003c\/td\u003e\n\u003ctd\u003eStandalone HDBaseT receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorts per Unit\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport Protocol\u003c\/td\u003e\n\u003ctd\u003eAVX SDVoE (10GBase-T)\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003ctd\u003eXTP (HDBaseT)\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 (18 Gbps)\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Powering of Receivers\u003c\/td\u003e\n\u003ctd\u003eYes (25.4W per port)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Embedding\u003c\/td\u003e\n\u003ctd\u003eYes (from MX2M audio layer)\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHot-Swap\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame Required\u003c\/td\u003e\n\u003ctd\u003eYes (MX2M)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat is the difference between the MX2M-4TPX-OB and the MX2M-4TPX-IB?\u003c\/dt\u003e\n\u003cdd\u003eThe MX2M-4TPX-OB is the output board — it routes signals from the MX2M matrix to TPX receivers and displays. The MX2M-4TPX-IB is the input board — it receives signals from TPX transmitters and sources. Both use the same physical form factor and AVX SDVoE technology.\u003c\/dd\u003e\n\u003cdt\u003eWhich TPX receivers are compatible with this board?\u003c\/dt\u003e\n\u003cdd\u003eThe board is compatible with all Lightware TPX receiver units (including HDMI-TPX-RX106, RX107, and related models) and SDVoE-compliant third-party receivers. Contact \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e for a compatibility matrix specific to your system design.\u003c\/dd\u003e\n\u003cdt\u003eCan I mix MX2M-4TPX-OB and MX2M-4HDMI20-OB boards in the same MX2M frame?\u003c\/dt\u003e\n\u003cdd\u003eYes. The MX2M modular architecture allows different board types to be mixed within the same frame, enabling systems with direct HDMI outputs and TPX\/SDVoE outputs simultaneously.\u003c\/dd\u003e\n\u003cdt\u003eDoes the PoE on this board power multiple daisy-chained devices?\u003c\/dt\u003e\n\u003cdd\u003eNo. Each of the four ports provides independent PoE to one connected receiver device. Daisy-chaining is not supported — each port powers exactly one TPX receiver.\u003c\/dd\u003e\n\u003cdt\u003eWhat is the meaning of the “non-switchable” designation in the product title?\u003c\/dt\u003e\n\u003cdd\u003e“Non-switchable” indicates that the board’s video path is managed by the MX2M frame’s crosspoint — the board itself does not contain an independent switcher. Routing decisions are made by the MX2M CPU, not the board’s local circuitry.\u003c\/dd\u003e\n\u003cdt\u003eIs configuration software required to set up the board?\u003c\/dt\u003e\n\u003cdd\u003eInitial board configuration and EDID management are performed via the Lightware Device Controller software. After initial setup, the board operates autonomously as part of the MX2M system.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43981076365548,"sku":"91130055","price":6418.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mx2m-4tpx-ob-avx-non-switchable-hdmi-2-0-output-board-91130055-creation-networks-79650.jpg?v=1757925512"},{"product_id":"lightware-mx2m-4tpx-ob-e-avx-non-switchable-hdmi-2-0-output-board-91130058","title":"Lightware MX2M-4TPX-OB-E AVX (non switchable) HDMI 2.0 output board - 91130058 (Discontinued)","description":"\u003cp data-mce-fragment=\"1\"\u003eThe MX2M-4TPX-OB-E board is Lightware’s newest development for the \u003cstrong data-mce-fragment=\"1\"\u003eMX2M modular matrix family.\u003c\/strong\u003e Featuring \u003cstrong data-mce-fragment=\"1\"\u003efour output ports with AVX technology\u003c\/strong\u003e the board is compatible with the full range of Lightware \u003cstrong data-mce-fragment=\"1\"\u003eTPX receivers\u003c\/strong\u003e and \u003cstrong data-mce-fragment=\"1\"\u003eSDVoE compliant 3rd party receiver devices\u003c\/strong\u003e. CAT6a TPX compatible 4-channel output board with PoE without audio embedding capability for the MX2M modular matrix family. The AVX technology provides a transparent medium for all \u003cstrong data-mce-fragment=\"1\"\u003eHDMI 2.0 video\u003c\/strong\u003e (up to a pixel clock frequency of 597 MHz), audio, \u003cstrong data-mce-fragment=\"1\"\u003eEthernet data\u003c\/strong\u003e and control signals in line with the MX2M multi layer architecture and allows for a cost effective extension solution for up to 100 meters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOn each of its ports, the MX2M-4TPX-OB can\u003cstrong data-mce-fragment=\"1\"\u003e embed 8-channel LPCM and various IEC 61937 audio formats\u003c\/strong\u003e from the Audio layer of the MX2M modular switcher.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe board also provides\u003cstrong data-mce-fragment=\"1\"\u003e remote powering\u003c\/strong\u003e for attached extenders according to the \u003cstrong data-mce-fragment=\"1\"\u003ePoE specification\u003c\/strong\u003e (IEEE 802.3af-2003) but with increased output power of 25.4W. Remote powering does not require an external power source.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCommand injection for \u003cstrong data-mce-fragment=\"1\"\u003eCEC, RS232,\u003c\/strong\u003e and \u003cstrong data-mce-fragment=\"1\"\u003eIR\u003c\/strong\u003e, as well as the \u003cstrong data-mce-fragment=\"1\"\u003eEDID management\u003c\/strong\u003e functionality are also among the features offered by the board, such as their connectivity and easy integration into a wide range of AV operations and \u003cstrong data-mce-fragment=\"1\"\u003ewith 3rd party devices\u003c\/strong\u003e, such as the Christie Terra projector.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product highlighted-attributes\"\u003e\n\u003ch4 class=\"highlighted-title\"\u003eHighlighted features\u003c\/h4\u003e\n\u003cul class=\"highlighted-list\"\u003e\n\u003cli class=\"highlighted-item\"\u003eHDCP 2.3 and HDCP 1.4 support with cross conversion capabilities\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eHot-swap support\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003ePass-through of audio and de-embedding audio from the Audio layer including uncompressed or HBR formats\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eExtension distance of up to 100 meters for 4k@60Hz 4:4:4 signals\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eHDMI 2.0, HDMI 1.x, and DVI compatible\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eSupport for low-latency Dolby Vision\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eLess than 0.1 ms signal latency\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eCompatible with TPX extenders and SDVoE based third party products\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eAdvanced EDID Management\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eCommand injection on RS-232 and IR ports\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eCEC support (command injection)\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eSupports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eSupports deep color signals (24\/30\/36 bit RGB\/YCbCr 4:4:4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cdiv class=\"custom-tab-content\"\u003e\n\u003ctable border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack mountable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure material\u003c\/td\u003e\n\u003ctd\u003e1.5 mm steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions in mm\u003c\/td\u003e\n\u003ctd\u003e195.5 W x 219.5 D x 41.2 H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions in inch\u003c\/td\u003e\n\u003ctd\u003e7.7 W x 8.6 D x 1.7 H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eTBD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"custom-tab-content\"\u003e\n\u003ctable border=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"300\"\u003e \u003ccol width=\"500\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption (max)\u003c\/td\u003e\n\u003ctd\u003eTBD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat dissipation\u003c\/td\u003e\n\u003ctd\u003eTBD BTU\/h (min), 120 BTU\/h (max)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower over Ethernet (PoE)\u003c\/td\u003e\n\u003ctd\u003ePoE remote powering of connected extenders according to IEEE802.3af\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"custom-tab-content\"\u003e\n\u003ctable border=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"300\"\u003e \u003ccol width=\"500\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cstrong\u003eAVX output\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector type\u003c\/td\u003e\n\u003ctd\u003eRJ45 connector (x4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower over Ethernet (PoE)\u003c\/td\u003e\n\u003ctd\u003eyes (IEEE 802.3af)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eSDVoE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP compliance\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransferred signals\u003c\/td\u003e\n\u003ctd\u003eVideo, Audio, RS-232, Infrared, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor space\u003c\/td\u003e\n\u003ctd\u003eRGB, YCbCr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo delay\u003c\/td\u003e\n\u003ctd\u003e0.08 ms (for 1080p60)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003eSupported resolutions at 8 bits\/color *\u003c\/td\u003e\n\u003ctd\u003eup to 4096x2048@60Hz (4:4:4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eup to 3840x2160@60Hz (4:4:4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\"\u003eAudio formats\u003c\/td\u003e\n\u003ctd\u003e8 channel PCM, DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDolby Atmos, Dolby TrueHD, DTS-HD DA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e* All standard VESA, CEA and other custom resolutions up to 600MHz (HDMI2.0) are supported.\u003c\/p\u003e\n\u003cdiv class=\"custom-tab-content\"\u003e\n\u003ctable border=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"300\"\u003e \u003ccol width=\"500\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cstrong\u003eGeneral\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUL, CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical safety\u003c\/td\u003e\n\u003ctd\u003eIEC\/EN\/UL\/CSA 62368-1:2014, Class II\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEMC (emission)\u003c\/td\u003e\n\u003ctd\u003eIEC\/EN 55032:2015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEMC (immunity)\u003c\/td\u003e\n\u003ctd\u003eIEC\/EN 55035:2017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoHS\u003c\/td\u003e\n\u003ctd\u003eEN 63000:2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e0° to +50°C (+32° to +122°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage temperature\u003c\/td\u003e\n\u003ctd\u003e-30° to +80˚C (-22° to +176˚F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating humidity\u003c\/td\u003e\n\u003ctd\u003e10% to 90%, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003ethrough the matrix frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43981076562156,"sku":"91130058","price":3200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mx2m-4tpx-ob-e-avx-non-switchable-hdmi-2-0-output-board-91130058-discontinued-creation-networks-80128.jpg?v=1757925513"},{"product_id":"lightware-ucx-2x1-tpx-tx20-usb-type-c-and-hdmi-switcher-transmitter","title":"Lightware UCX-2x1-TPX-TX20 USB Type-C and HDMI Switcher Transmitter - 91310098","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware UCX-2x1-TPX-TX20 is a 2-input USB-C and HDMI switcher transmitter that delivers 4K@60Hz 4:4:4 uncompressed video, USB 2.0, and control signals over a single CAT6A cable to a compatible TPX receiver at distances up to 100 meters. It is part of the Taurus UCX product family and designed for point-to-point AV extension in corporate meeting rooms, huddle spaces, and collaboration environments where a clean, single-cable table connection is required without the complexity of a full 10G network infrastructure. The transmitter powers the connected receiver via PoE+ (up to 25.4W) and supplies up to 100W USB-C charging to the presenter device.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eUnlike the TPN variant, the UCX-2x1-TPX-TX20 uses Direct-link SDVoE technology over a single CAT6A cable rather than a 10G Ethernet switch fabric. This makes it appropriate for rooms where a direct transmitter-to-receiver run is sufficient and where the cost and complexity of a managed 10G network switch is not justified. The TPX output carries video, audio, USB 2.0 (bidirectional), RS-232, OCS, and Ethernet in both directions over one cable to a single paired receiver.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-ucx-2x1-tpx-tx20-usb-type-c-and-hdmi-switcher-transmitter-91310098-creation-networks-96940.jpg?v=1757936614\" alt=\"Lightware UCX-2x1-TPX-TX20 front and rear view\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe device accepts one USB-C input (DP 1.2a) and one HDMI 2.0 input, switching between them automatically or manually. It supports 5K (5120x2160) video at 30Hz 4:4:4 or 60Hz 4:2:0 via the HDMI input for ultrawide display formats. Independent USB host switching supports up to 8 USB 2.0 devices across the TX and RX sides (4 per device), covering cameras, speakerphones, and HID peripherals. Room device control is provided via Ethernet, serial, OCS, or GPIO. A FIPS 140-2 variant (UCX-2x1-TPX-TX20-LCC, SKU: 91360032) is available for secure deployments.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-link SDVoE over single CAT6A\u003c\/strong\u003e — extends video, audio, USB 2.0, RS-232, OCS, and Ethernet up to 100m without a network switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-input switching\u003c\/strong\u003e — USB-C (DP 1.2a) and HDMI 2.0 with automatic or manual input selection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K@60Hz 4:4:4 video\u003c\/strong\u003e — uncompressed HDMI 2.0 up to 4096x2160@60Hz RGB 4:4:4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5K resolution support\u003c\/strong\u003e — 5120x2160 via HDMI 2.0 at 30Hz 4:4:4 or 60Hz 4:2:0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W USB-C charging\u003c\/strong\u003e — delivers full power to connected laptop during presentation sessions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE+ receiver powering\u003c\/strong\u003e — transmitter supplies up to 25.4W (PoE+ IEEE 802.3at) to the paired receiver, eliminating separate receiver power supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependent USB 2.0 host switching\u003c\/strong\u003e — supports up to 4 USB devices at TX and 4 at RX for shared peripheral management\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog audio output\u003c\/strong\u003e — 5-pole Phoenix, 2-channel PCM at 48kHz with adjustable volume and balance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIPS 140-2 variant available\u003c\/strong\u003e — UCX-2x1-TPX-TX20-LCC (SKU: 91360032) includes Lightware Crypto Core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSyslog remote logging\u003c\/strong\u003e — RFC3164 and RFC5424 over TCP, UDP, or TLS for SIEM integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eHuddle room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e91310098\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-C input\u003c\/td\u003e\n\u003ctd\u003e24-pole USB Type-C receptacle, DP 1.2a, max 4096x2160@60Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI input\u003c\/td\u003e\n\u003ctd\u003e19-pole HDMI Type A (screw-lock), HDMI 2.0\/1.4\/DVI 1.0, 18Gbps max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax video resolution\u003c\/td\u003e\n\u003ctd\u003e4096x2160@60Hz RGB 4:4:4; 5120x2160 (5K) 30Hz 4:4:4 or 60Hz 4:2:0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP compliance\u003c\/td\u003e\n\u003ctd\u003eHDCP 1.4 and HDCP 2.2 (input); HDCP 2.3 (TPX output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPX output\u003c\/td\u003e\n\u003ctd\u003eRJ45, 10GBase-T, AVXT, PoE+ PSE (IEEE 802.3at, up to 25.4W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension distance\u003c\/td\u003e\n\u003ctd\u003eUp to 100m over CAT6A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransferred signals (TPX)\u003c\/td\u003e\n\u003ctd\u003eVideo, audio, USB 2.0, RS-232, OCS, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-C charging\u003c\/td\u003e\n\u003ctd\u003eUp to 100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB 2.0 switching\u003c\/td\u003e\n\u003ctd\u003eUp to 8 devices total (4x TX, 4x RX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog audio output\u003c\/td\u003e\n\u003ctd\u003e5-pole Phoenix, 2-ch PCM, 48kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232\u003c\/td\u003e\n\u003ctd\u003e3-pole Phoenix, 9600–115200 baud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO\u003c\/td\u003e\n\u003ctd\u003e8-pole Phoenix, pins 1–6 configurable I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eExternal 160W PSU (optional, used when powering receiver via PoE+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e271 W x 140.3 D x 26 H mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1040 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eCE, UKCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware UCX-2x1-TPX-TX20\u003c\/th\u003e\n\u003cth\u003eCrestron HD-MD4X2-4KZ-E\u003c\/th\u003e\n\u003cth\u003eExtron SW 2 HDMI 4K\u003c\/th\u003e\n\u003cth\u003eKramer VS-21H\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-C input with charging\u003c\/td\u003e\n\u003ctd\u003eYes, 100W power delivery\u003c\/td\u003e\n\u003ctd\u003eNo USB-C input\u003c\/td\u003e\n\u003ctd\u003eNo USB-C input\u003c\/td\u003e\n\u003ctd\u003eNo USB-C input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax extension distance\u003c\/td\u003e\n\u003ctd\u003e100m over single CAT6A\u003c\/td\u003e\n\u003ctd\u003eLocal switching only, no extension\u003c\/td\u003e\n\u003ctd\u003eLocal switching only\u003c\/td\u003e\n\u003ctd\u003eLocal switching only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceiver power delivery\u003c\/td\u003e\n\u003ctd\u003ePoE+ (25.4W) to paired receiver\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5K video support\u003c\/td\u003e\n\u003ctd\u003eYes, via HDMI 2.0\u003c\/td\u003e\n\u003ctd\u003e4K@60 maximum\u003c\/td\u003e\n\u003ctd\u003e4K@60 maximum\u003c\/td\u003e\n\u003ctd\u003e4K@60 maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB 2.0 host switching\u003c\/td\u003e\n\u003ctd\u003eIndependent layer, 8 devices\u003c\/td\u003e\n\u003ctd\u003eUSB-C pass-through only\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFIPS 140-2 variant\u003c\/td\u003e\n\u003ctd\u003eAvailable (SKU: 91360032)\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork infrastructure required\u003c\/td\u003e\n\u003ctd\u003eNo switch required for single room\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat is the difference between the UCX-2x1-TPX-TX20 and the UCX-2x1-TPN-TX20?\u003c\/dt\u003e\n\u003cdd\u003eThe TPX variant uses Direct-link SDVoE over a single CAT6A cable to one receiver (point-to-point, up to 100m). The TPN variant connects to a 10G Ethernet switch fabric, enabling one-to-many distribution to multiple receivers across a network. The TPX is appropriate for individual rooms; the TPN is for networked multi-room matrix installations.\u003c\/dd\u003e\n\u003cdt\u003eDoes the transmitter require a separate power supply for the receiver?\u003c\/dt\u003e\n\u003cdd\u003eNo. The UCX-2x1-TPX-TX20 delivers PoE+ power (up to 25.4W per IEEE 802.3at) to the paired receiver through the CAT6A cable, eliminating the need for a separate receiver power supply in most installations.\u003c\/dd\u003e\n\u003cdt\u003eCan the TPX-TX20 be used in a larger matrix system?\u003c\/dt\u003e\n\u003cdd\u003eThe UCX-2x1-TPX-TX20 can be connected to compatible Lightware MX2M matrix boards (e.g., MX2M-4TPX-IB) that accept TPX signals, integrating point-to-point TPX endpoints into a larger modular matrix installation.\u003c\/dd\u003e\n\u003cdt\u003eWhat receiver is the UCX-2x1-TPX-TX20 designed to work with?\u003c\/dt\u003e\n\u003cdd\u003eCompatible receivers include the HDMI-UCX-TPX-RX107, UCX-3x3-TPX-RX20, HDMI-TPX-RX107, HDMI-TPX-RX107A-SR, HDMI-TPX-RX107AU2K-SR, and other Direct-link SDVoE compatible TPX receivers from Lightware.\u003c\/dd\u003e\n\u003cdt\u003eWhat is the maximum HDMI cable length at 4K@60Hz 4:4:4 on the input side?\u003c\/dt\u003e\n\u003cdd\u003eThe maximum input HDMI cable length using a premium certified HDMI cable at 3840x2160@60Hz 4:4:4 is 5 meters.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":44532129693932,"sku":"91310098","price":3448.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-ucx-2x1-tpx-tx20-usb-type-c-and-hdmi-switcher-transmitter-91310098-creation-networks-96940.jpg?v=1757936614"},{"product_id":"lightware-tpx-2x1-tx20-rx107-taurus-tpx-transmitter-and-receiver-bundle-91350019","title":"Lightware TPX-2x1-TX20-RX107 Taurus TPX transmitter and receiver bundle - 91350019","description":"\u003ch1\u003eLightware TPX-2x1-TX20-RX107 – Taurus TPX HDMI HDBaseT Transmitter and Receiver Bundle\u003c\/h1\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Lightware TPX-2x1-TX20-RX107 is a Taurus TPX HDBaseT extension bundle comprising a 2-input 1-output transmitter (TX20) and a compatible receiver (RX107), designed for reliable point-to-point HDMI signal distribution over a single CAT cable. The transmitter accepts two HDMI sources and selects one for transmission to the receiver, making it suitable for meeting rooms, boardrooms, and auditoriums where a local presenter and a room PC must share a single display or projection endpoint over structured cabling. Integrators specifying an HDBaseT HDMI transmitter and receiver bundle for commercial AV distribution requiring source switching at the transmitter will find the TPX-2x1-TX20-RX107 a purpose-fit solution. Purchase the Lightware TPX-2x1-TX20-RX107 at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Taurus TPX-2x1-TX20-RX107 bundle pairs a dual-input HDBaseT transmitter with a single-output receiver in a factory-matched kit for straightforward deployment. The TX20 transmitter accepts two HDMI inputs and routes the selected source over a single CAT5e\/6\/7 cable to the RX107 receiver, which outputs the signal to the display. This removes the need for multiple cable runs between the source location and the display, consolidating AV distribution into structured cabling infrastructure.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-tpx-2x1-tx20-rx107-taurus-tpx-transmitter-and-receiver-bundle-91350019-creation-networks-26678.png?v=1757936615\" alt=\"Lightware TPX-2x1-TX20-RX107 transmitter and receiver bundle\" style=\"max-width:100%;\"\u003e\n\n\u003cp\u003eThe TPX ecosystem supports bidirectional control signal extension alongside video, allowing RS-232 and Ethernet pass-through from the receiver location back to the transmitter end without additional cabling. USB and audio management features enable peripheral routing to the display-side room device. The Taurus TPX product line is compatible with Lightware matrix systems including the MX2M, enabling the TX20 to operate as an input endpoint within larger distributed AV installations.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-tpx-2x1-tx20-rx107-taurus-tpx-transmitter-and-receiver-bundle-91350019-creation-networks-13507.jpg?v=1757936616\" alt=\"TPX-2x1-TX20-RX107 application diagram\" style=\"max-width:100%;\"\u003e\n\n\u003cp\u003eThe bundle is sold as a matched TX\/RX pair (SKU 91350019), simplifying procurement for single-room deployments. Full technical specifications are published on \u003ca href=\"https:\/\/www.lightware.com\"\u003elightware.com\u003c\/a\u003e. Purchase at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Input HDMI Switcher at Transmitter\u003c\/strong\u003e — The TX20 accepts two HDMI sources and selects one for transmission, consolidating multi-source rooms into a single cable run to the display endpoint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT Extension over Single CAT Cable\u003c\/strong\u003e — Transmits HDMI video, audio, control, and power over a single CAT5e\/6\/7 structured cable, minimizing cable infrastructure in the plenum or conduit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched TX\/RX Bundle\u003c\/strong\u003e — TX20 transmitter and RX107 receiver are sold as a tested and matched pair, reducing procurement complexity for single-room installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBidirectional Control Extension\u003c\/strong\u003e — RS-232 and Ethernet control signals pass in both directions over the HDBaseT link, enabling room control from either the source or display end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX2M Matrix Compatibility\u003c\/strong\u003e — The TX20 can operate as an input endpoint within a Lightware MX2M modular matrix installation, extending the matrix reach to remote source locations over structured cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor\u003c\/strong\u003e — Both transmitter and receiver are desktop or rack-mountable compact units suitable for under-table, wall-box, or rack shelf installation at the source and display locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaurus TPX Ecosystem\u003c\/strong\u003e — Part of Lightware's Taurus TPX product family, ensuring long-term compatibility and firmware support across TPX transmitter and receiver variants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBundle Contents\u003c\/td\u003e\n\u003ctd\u003e1x TPX-TX20 transmitter, 1x TPX-RX107 receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmitter HDMI Inputs\u003c\/td\u003e\n\u003ctd\u003e2x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmitter HDMI Outputs\u003c\/td\u003e\n\u003ctd\u003e1x (via HDBaseT to receiver)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistribution Medium\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over CAT5e\/6\/7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceiver HDMI Output\u003c\/td\u003e\n\u003ctd\u003e1x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Pass-Through\u003c\/td\u003e\n\u003ctd\u003eRS-232, Ethernet (bidirectional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eLightware MX2M matrix (as input endpoint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e91350019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eFull electrical specifications (resolution, cable distance, power consumption) are available at \u003ca href=\"https:\/\/www.lightware.com\/en\/products\/AV-over-IP\/tpx-2x1-tx20-rx107\"\u003elightware.com\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware TPX-2x1-TX20-RX107\u003c\/th\u003e\n\u003cth\u003eCrestron HD-MD4X2-4KZ-E\u003c\/th\u003e\n\u003cth\u003eExtron SW 4 HDMI 4K\u003c\/th\u003e\n\u003cth\u003eKramer VS-41H2\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBundle Type\u003c\/td\u003e\n\u003ctd\u003eMatched TX+RX HDBaseT bundle with 2-input switcher at TX\u003c\/td\u003e\n\u003ctd\u003eStandalone 4x2 HDMI matrix — no bundled receiver\u003c\/td\u003e\n\u003ctd\u003eStandalone 4x1 switcher — no bundled receiver\u003c\/td\u003e\n\u003ctd\u003eStandalone 4x1 switcher — no bundled receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Medium\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over CAT5e\/6\/7\u003c\/td\u003e\n\u003ctd\u003eHDBaseT output option on some models\u003c\/td\u003e\n\u003ctd\u003eHDMI only (no extension)\u003c\/td\u003e\n\u003ctd\u003eHDMI only (no extension)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource Inputs (at TX\/switcher)\u003c\/td\u003e\n\u003ctd\u003e2x HDMI at transmitter\u003c\/td\u003e\n\u003ctd\u003e4x HDMI at switcher\u003c\/td\u003e\n\u003ctd\u003e4x HDMI at switcher\u003c\/td\u003e\n\u003ctd\u003e4x HDMI at switcher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBidirectional Control\u003c\/td\u003e\n\u003ctd\u003eYes — RS-232 + Ethernet over HDBaseT\u003c\/td\u003e\n\u003ctd\u003eRS-232 + Ethernet via HDBaseT output\u003c\/td\u003e\n\u003ctd\u003eRS-232 only (no HDBaseT)\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet (no HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Integration\u003c\/td\u003e\n\u003ctd\u003eYes — MX2M endpoint\u003c\/td\u003e\n\u003ctd\u003eStandalone or DM matrix endpoint\u003c\/td\u003e\n\u003ctd\u003eStandalone\u003c\/td\u003e\n\u003ctd\u003eStandalone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcurement\u003c\/td\u003e\n\u003ctd\u003eSingle SKU matched TX\/RX pair\u003c\/td\u003e\n\u003ctd\u003eSwitcher only; extension requires separate purchase\u003c\/td\u003e\n\u003ctd\u003eSwitcher only\u003c\/td\u003e\n\u003ctd\u003eSwitcher only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is included in the TPX-2x1-TX20-RX107 bundle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe bundle (SKU 91350019) includes one TPX-TX20 dual-input HDBaseT transmitter and one TPX-RX107 HDBaseT receiver, sold as a matched pair for single-room HDBaseT AV extension deployments.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eCan the TX20 transmitter switch between the two HDMI inputs automatically?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The TX20 supports auto-switching based on signal presence, as well as manual input selection via front panel or control system command over RS-232 or Ethernet.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eWhat CAT cable category is required for the HDBaseT link?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe HDBaseT link operates over CAT5e, CAT6, or CAT7 unshielded or shielded twisted-pair cable. CAT6 or above is recommended for longer cable runs or installations in electrically noisy environments.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eIs the TX20 compatible with the Lightware MX2M matrix?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The TPX-TX20 can operate as a remote input endpoint within a Lightware MX2M modular matrix installation, extending matrix input reach to rooms or areas not co-located with the matrix frame.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eDoes the receiver support control signal return from the display location?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. RS-232 and Ethernet control signals pass bidirectionally over the HDBaseT link, allowing a room control system at the display end to communicate with devices at the source end without additional cable runs.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase the Lightware TPX-2x1-TX20-RX107?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe TPX-2x1-TX20-RX107 bundle is available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller for commercial AV integrators and enterprise end users.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":44532145783020,"sku":"91350019","price":5412.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-tpx-2x1-tx20-rx107-taurus-tpx-transmitter-and-receiver-bundle-91350019-creation-networks-26678.png?v=1757936615"},{"product_id":"lightware-ucx-3x3-tpx-rx20-ucx-matrix-switcher-receiver-with-hdmi-2-0-inputs-and-usb-3-1-gen1-host-ports-91310100","title":"LightWare UCX-3x3-TPX-RX20 UCX Matrix Switcher Receiver with HDMI 2.0 inputs and USB 3.1 Gen1 host ports - 91310100","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware UCX-3x3-TPX-RX20 is the receiver unit of Lightware's Taurus UCX TPX transmitter-receiver system, providing 3-input, 3-output matrix switching at the display end of an SDVoE-based AV extension run of up to 100 meters over a single CATx cable. It adds local HDMI 2.0 and USB 3.1 Gen1 connectivity at the display side for room PCs, wireless presentation systems, cameras, and speakerphones, extending the capabilities of the remote transmitter into the room with full USB host switching across up to 8 devices. Long-tail keywords: Lightware UCX-3x3-TPX-RX20 SDVoE HDBaseT receiver USB-C HDMI, 4K 60Hz AV over IP receiver matrix switcher meeting room, Lightware Taurus TPX receiver triple HDMI output.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe UCX-3x3-TPX-RX20 connects to a compatible Lightware TPX transmitter (such as the UCX-2x1-TPX-TX20 or UCX-4x3-TPX-TX20) via a single CATx cable using Lightware's AVX\/AVXT 10GBase-T protocol. Over this link it receives video, audio, USB 2.0, RS-232, GPIO, occupancy sensor data, and Ethernet in both directions. At the display end, the unit provides three independent HDMI 2.0 outputs for multi-display rooms, plus two local HDMI 2.0 inputs and two USB-B 3.1 host ports for room-resident equipment. The independent USB host switching layer manages up to 8 USB devices split across the transmitter (4x USB-A) and receiver (4x USB-A) sides, all controlled from a single switching event. Three independent Ethernet ports (1GBase-T) on the receiver support room LAN, device control, and corporate network access. Analog audio output via 5-pole Phoenix and RS-232\/GPIO\/OCS ports enable control system integration. The LARA automation platform runs locally, supporting welcome screens, display power control, and occupancy-triggered room routines without an external processor. Remote Syslog via TCP, UDP, or TLS integrates with enterprise SIEM platforms.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-ucx-3x3-tpx-rx20-ucx-matrix-switcher-receiver-with-hdmi-2-0-inputs-and-usb-3-1-gen1-host-ports-91310100-creation-networks-94184.jpg?v=1757939153\" alt=\"Lightware UCX-3x3-TPX-RX20 Receiver\" style=\"max-width:100%;height:auto;\"\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3x HDMI 2.0 Outputs\u003c\/strong\u003e — Drives three independent displays from a single receiver unit for multi-display room configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x Local HDMI 2.0 Inputs\u003c\/strong\u003e — Connect room PC, wireless presentation system, or other local sources directly at the display end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100m Extension via Single CATx\u003c\/strong\u003e — 10GBase-T AVX\/AVXT link carries video, USB, audio, and control between TX and RX over standard CATx cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K UHD @60Hz 4:4:4\u003c\/strong\u003e — Full 18 Gbps video with HDCP 2.3 on both TPX and HDMI ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5K Ultrawide Support\u003c\/strong\u003e — 5120×2160 via HDMI 2.0 at 30Hz 4:4:4 or 60Hz 4:2:0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB 3.1 Host Switching\u003c\/strong\u003e — 2x USB-B 3.1 host ports and 4x USB-A peripheral ports locally, coordinated with TX-side USB for up to 8 total devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Channel Audio Pass-Through\u003c\/strong\u003e — PCM, Dolby TrueHD, and DTS-HD Master Audio 7.1 supported over both TPX and HDMI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog Audio Output\u003c\/strong\u003e — 2-channel balanced LPCM via 5-pole Phoenix at 48 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Gigabit Ethernet Ports\u003c\/strong\u003e — 1GBase-T ports for room LAN, corporate, and device control separation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLARA Room Automation\u003c\/strong\u003e — Local scripting for display control, welcome screens, and occupancy-triggered actions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCEC Command Injection\u003c\/strong\u003e — Control displays at the HDMI outputs via CEC without additional control cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNIST FIPS 140-2 Variant Available\u003c\/strong\u003e — UCX-3x3-TPX-RX20-LCC adds certified cryptographic security for government deployments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Outputs\u003c\/td\u003e\n\u003ctd\u003e3x HDMI Type A with screw locking option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Inputs\u003c\/td\u003e\n\u003ctd\u003e2x HDMI Type A with screw locking option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPX Input\u003c\/td\u003e\n\u003ctd\u003e1x RJ-45 (10GBase-T, AVXT protocol)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Resolution\u003c\/td\u003e\n\u003ctd\u003e4096×2160 @60Hz 4:4:4; 5120×2160 @30Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAV Standard\u003c\/td\u003e\n\u003ctd\u003eDVI 1.0, HDMI 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Formats (HDMI)\u003c\/td\u003e\n\u003ctd\u003e8-ch PCM, Dolby TrueHD, DTS-HD Master Audio 7.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Output\u003c\/td\u003e\n\u003ctd\u003e1x 5-pole Phoenix; 2-ch PCM; 48 kHz; balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e3x RJ-45, 1GBase-T full duplex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Host (RX)\u003c\/td\u003e\n\u003ctd\u003e2x USB-B 3.1 Gen1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Peripherals (RX)\u003c\/td\u003e\n\u003ctd\u003e4x USB-A 3.1 Gen1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232\u003c\/td\u003e\n\u003ctd\u003e1x 3-pole Phoenix, default 9600 baud 8N1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO\u003c\/td\u003e\n\u003ctd\u003e8-pole Phoenix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOccupancy Sensor\u003c\/td\u003e\n\u003ctd\u003e3-pole Phoenix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eExternal 80W (12V DC 2A locking connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e9W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e246 mm W x 140.3 mm D x 26 mm H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e936 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0° to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eCE, UKCA; EN 55032:2015; EN 55035:2017; RoHS EN 63000:2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware UCX-3x3-TPX-RX20\u003c\/th\u003e\n\u003cth\u003eCrestron HD-MD4X2-4KZ-E\u003c\/th\u003e\n\u003cth\u003eExtron SW 4 HDMI 4K\u003c\/th\u003e\n\u003cth\u003eKramer VS-41H2\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Outputs\u003c\/td\u003e\n\u003ctd\u003e3x independent HDMI 2.0\u003c\/td\u003e\n\u003ctd\u003e2x HDMI (standalone, no RX role)\u003c\/td\u003e\n\u003ctd\u003e1x HDMI (standalone)\u003c\/td\u003e\n\u003ctd\u003e1x HDMI (standalone)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Distance\u003c\/td\u003e\n\u003ctd\u003eUp to 100m over CATx (AVX\/AVXT)\u003c\/td\u003e\n\u003ctd\u003eN\/A standalone switcher\u003c\/td\u003e\n\u003ctd\u003eN\/A standalone switcher\u003c\/td\u003e\n\u003ctd\u003eN\/A standalone switcher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal HDMI Inputs at Display End\u003c\/td\u003e\n\u003ctd\u003eYes, 2x HDMI 2.0\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Host Switching\u003c\/td\u003e\n\u003ctd\u003eYes, up to 8 devices TX+RX\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP Version\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.3\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Out\u003c\/td\u003e\n\u003ctd\u003eYes, 5-pole Phoenix\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFIPS 140-2 Variant\u003c\/td\u003e\n\u003ctd\u003eYes (LCC model)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat transmitter units are compatible with the UCX-3x3-TPX-RX20?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCompatible transmitters include the UCX-2x1-TPX-TX20, UCX-4x3-TPX-TX20, UCX-4x3-TPX-TX30-R, and the HDMI-TPX-TX106\/TX107 series. Always confirm compatibility with your Lightware reseller.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat cable type is required between transmitter and receiver?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eA single CATx cable (Cat6 or better recommended for 10GBase-T at 100m) connects the TPX input on the receiver to the TPX output on the transmitter. PoE is not supported on the TPX link.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan the receiver operate as a standalone switcher without a transmitter?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. The UCX-3x3-TPX-RX20 requires a compatible TPX transmitter for its primary video source. The two local HDMI inputs provide supplemental source connectivity at the receiver end.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow does USB host switching work across the TX\/RX pair?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe system maintains an independent USB host layer. Up to four host devices at the transmitter and four at the receiver can connect, with peripherals on either end accessible to any selected host. Switching is coordinated by the LARA platform or an external control system.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs a FIPS 140-2 version available for classified environments?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The UCX-3x3-TPX-RX20-LCC includes NIST FIPS 140-2 certified Lightware CryptoCore for installations in classified government and defense environments.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan the LARA platform trigger display power based on room occupancy?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The occupancy sensor port and CEC command injection at the HDMI outputs allow LARA scripts to power displays on and off automatically based on occupancy sensor state.\u003c\/dd\u003e\n\u003c\/dl\u003e\u003cp\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e — your authorized Lightware reseller for commercial AV integration.\u003c\/p\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":45538531279084,"sku":"91310100","price":3974.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-ucx-3x3-tpx-rx20-ucx-matrix-switcher-receiver-with-hdmi-2-0-inputs-and-usb-3-1-gen1-host-ports-91310100-creation-networks-94184.jpg?v=1757939153"},{"product_id":"lightware-usb-type-c-and-hdmi-transmitter-switcher-91310095","title":"LightWare DCX-3x1-TPX-TX10 USB Type-C and HDMI Transmitter Switcher - 91310095","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Lightware DCX-3x1-TPX-TX10 is a USB-C and HDMI transmitter switcher built for the AV-over-IP ecosystem using SDVoE technology. It accepts two HDMI 2.0 inputs and one USB-C input (DisplayPort Alt Mode), switches among them, and transmits video, audio, USB 2.0, RS-232, and Ethernet over a single 10GBase-T Ethernet link to compatible TPX receivers at distances up to 100 m. USB-C power delivery up to 100W allows a connected laptop to charge simultaneously — removing the need for a separate power adapter at the table.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe DCX-3x1-TPX-TX10 consolidates the presenter connectivity functions typically requiring multiple devices — switcher, extender, USB hub, and charger — into a single compact unit suitable for deployment at a conference table, lectern, or media plate position. The USB-C input accepts DisplayPort 1.2a signals from laptops and workstations, while the two HDMI 2.0 inputs handle dedicated sources, codecs, or additional laptops up to 4096x2160@60Hz at 4:4:4 color with 18 Gbps throughput.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-dcx-3x1-tpx-tx10-usb-type-c-and-hdmi-transmitter-switcher-91310095-creation-networks-44411.png?v=1757939156\" alt=\"Lightware DCX-3x1-TPX-TX10 front view\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-dcx-3x1-tpx-tx10-usb-type-c-and-hdmi-transmitter-switcher-91310095-creation-networks-27836.png?v=1757939164\" alt=\"Lightware DCX-3x1-TPX-TX10 rear connectors\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe TPX output transmits the consolidated signal bundle — video, embedded audio, USB 2.0, RS-232, and Ethernet — over a single CAT6A or better cable to a TPX receiver, eliminating the need to run dedicated USB or control cabling alongside the video path. An integrated SDVoE Control Server manages signal distribution within 10G network environments. A local HDMI output on the transmitter provides a monitor loop for the presenter. The unit is powered by an external 160W supply and uses an internal BR1632A battery for configuration retention. Pixel Accurate Reclocking on the HDMI inputs eliminates source jitter before transmission.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3-input switching\u003c\/strong\u003e — 1x USB-C (DP 1.2a) and 2x HDMI 2.0 inputs selectable at the transmitter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUSB-C 100W charging\u003c\/strong\u003e — powers connected laptops via the USB-C input simultaneously with video and data transmission\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle-cable TPX output\u003c\/strong\u003e — transmits video, audio, USB 2.0, RS-232, and Ethernet over one 10GBase-T RJ45 connection up to 100 m\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4K@60Hz 4:4:4 support\u003c\/strong\u003e — full 4096x2160@60Hz RGB 4:4:4 on USB-C and HDMI inputs, up to 600 MHz pixel clock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHDCP 2.3 on TPX output\u003c\/strong\u003e — HDCP 1.4 and 2.2 on video inputs; HDCP 2.3 transmitted over the network link\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated SDVoE Control Server\u003c\/strong\u003e — manages AV-over-IP signal routing without a separate control device\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePixel Accurate Reclocking\u003c\/strong\u003e — removes jitter and skew from HDMI input sources before network transmission\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnalog audio output\u003c\/strong\u003e — 5-pole Phoenix connector, 2-ch PCM at 48 kHz, -95.62 to 0 dB volume range\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGPIO control\u003c\/strong\u003e — 8-pole Phoenix with 6 configurable input\/output pins, 5V output pin, and ground\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRS-232 pass-through\u003c\/strong\u003e — 3-pole Phoenix, 9600–115200 baud, with full RS-232 voltage levels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact 1U-height form factor\u003c\/strong\u003e — 271 x 140.3 x 26 mm, desktop or shelf installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConference rooms with BYOD presentation from USB-C laptops requiring simultaneous video, USB, and charging\u003c\/li\u003e\n  \u003cli\u003e10G SDVoE AV-over-IP system endpoints for enterprise and higher-education AV networks\u003c\/li\u003e\n  \u003cli\u003eBoardrooms with multiple source types (laptop, codec, media player) at a single presenter position\u003c\/li\u003e\n  \u003cli\u003eLecture theaters and auditoriums with remote display locations over installed network infrastructure\u003c\/li\u003e\n  \u003cli\u003eSystems requiring USB 2.0 device extension (cameras, microphones, touch panels) to a remote receiver over the same cable as video\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003eUSB-C Input\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003e24-pole USB Type-C receptacle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eA\/V Standard\u003c\/td\u003e\n\u003ctd\u003eDisplayPort 1.2a\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e1.4, 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4096x2160@60Hz RGB 4:4:4 (600 MHz); 1920x1080@120Hz 36-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCharging Output\u003c\/td\u003e\n\u003ctd\u003eUp to 100W\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003eHDMI Inputs (x2)\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003e19-pole HDMI Type A with locking option\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eA\/V Standard\u003c\/td\u003e\n\u003ctd\u003eDVI 1.0, HDMI 1.4, HDMI 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Data Rate\u003c\/td\u003e\n\u003ctd\u003e18 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Pixel Clock\u003c\/td\u003e\n\u003ctd\u003e597 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e1.4, 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4096x2160@60Hz RGB 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eReclocking\u003c\/td\u003e\n\u003ctd\u003ePixel Accurate Reclocking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003eHDMI Local Output\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003e19-pole HDMI Type A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSupported Formats\u003c\/td\u003e\n\u003ctd\u003eDVI 1.0, HDMI 1.4, HDMI 2.0; up to 4K@60Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003eTPX Network Output\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eRJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eData Rate\u003c\/td\u003e\n\u003ctd\u003e10GBase-T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003ePoE PD (IEEE802.3af)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.3\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100 m over CAT6A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTransferred Signals\u003c\/td\u003e\n\u003ctd\u003eVideo, Audio, USB 2.0, RS-232, OCS, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003eAudio\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog Output\u003c\/td\u003e\n\u003ctd\u003e5-pole Phoenix; 2-ch PCM; 48 kHz; -95.62 to 0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003eControl\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003eRJ45; 10\/100\/1000 Base-T full duplex\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRS-232\u003c\/td\u003e\n\u003ctd\u003e3-pole Phoenix; 9600–115200 baud\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUSB (control)\u003c\/td\u003e\n\u003ctd\u003eMini-B type (USB 2.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUSB (host)\u003c\/td\u003e\n\u003ctd\u003eA-type receptacle (USB 2.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGPIO\u003c\/td\u003e\n\u003ctd\u003e8-pole Phoenix; pins 1–6 configurable in\/out; pin 7 = 5V out\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003ePhysical\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e271 W x 140.3 D x 26 H mm (10.7 x 5.57 x 1.01 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eExternal 160W supply; 100–240V AC 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBattery\u003c\/td\u003e\n\u003ctd\u003eBR1632A (configuration retention)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eInternal cooling fan\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eCE, UKCA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background:#f2f2f2;\"\u003e\n      \u003cth\u003eCriteria\u003c\/th\u003e\n      \u003cth\u003eLightware DCX-3x1-TPX-TX10\u003c\/th\u003e\n      \u003cth\u003eCrestron HD-TX-101-C-E\u003c\/th\u003e\n      \u003cth\u003eExtron XTP T UWP 302\u003c\/th\u003e\n      \u003cth\u003eAtlona AT-UHD-EX-100CEA-TX\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUSB-C input with charging\u003c\/td\u003e\n\u003ctd\u003eYes — 100W PD\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput count\u003c\/td\u003e\n\u003ctd\u003e3 (2x HDMI + 1x USB-C)\u003c\/td\u003e\n\u003ctd\u003e1x HDMI\u003c\/td\u003e\n\u003ctd\u003e2 (HDMI + USB-C)\u003c\/td\u003e\n\u003ctd\u003e1x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNetwork output standard\u003c\/td\u003e\n\u003ctd\u003eSDVoE \/ 10GBase-T\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (1G)\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (100M)\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (1G)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax resolution over link\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz 4:2:0\u003c\/td\u003e\n\u003ctd\u003e4K@30Hz\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz 4:2:0\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUSB 2.0 over single cable\u003c\/td\u003e\n\u003ctd\u003eYes — included in TPX signal bundle\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIntegrated SDVoE control\u003c\/td\u003e\n\u003ctd\u003eYes — onboard Control Server\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog audio output\u003c\/td\u003e\n\u003ctd\u003eYes — 5-pole Phoenix, adjustable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGPIO ports\u003c\/td\u003e\n\u003ctd\u003eYes — 8-pole Phoenix\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat receiver is required on the far end of the TPX link?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe DCX-3x1-TPX-TX10 is compatible with Lightware TPX receiver devices, including the HDMI-TPN-RX107AU2K-SR and similar TPX series units. Confirm receiver compatibility with the specific signal types and USB modes required for your installation before ordering.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eCan the USB-C port deliver 100W charging while transmitting video?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. The USB-C input simultaneously handles DisplayPort Alt Mode video\/audio signal and USB Power Delivery up to 100W. A laptop connected over USB-C can be charged and its display output transmitted to the TPX network without separate power adapter.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eDoes the unit work in a standard 1G Ethernet environment?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eNo. The TPX output requires a 10GBase-T network infrastructure. A 10G switch with appropriate SFP+ or RJ45 10G ports must be installed between the TX and RX units. Standard 1G network equipment is not compatible with the 10G SDVoE link.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eCan HDCP 2.2 protected content from a laptop be transmitted?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. Both USB-C and HDMI inputs support HDCP 1.4 and 2.2. The TPX output transmits with HDCP 2.3. The receiving display must also support HDCP 2.x for protected content to pass through the full chain.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eWhat USB device types are supported over the TPX link?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe TPX link carries USB 2.0 data. Compatible device classes include audio, video, mass storage, HID, hub, smart card, and vendor-specific devices when using transparent mode. HID-only composite mode is also available. USB 3.0 devices are not supported over the TPX link.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eIs this the same product as the UCX-4x2-HC30?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eNo. The DCX-3x1-TPX-TX10 is a 3-input transmitter switcher designed for TPX (10G) output. The UCX series targets different connectivity profiles. Verify part numbers when comparing Lightware DCX and UCX products for your specific application.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eWhere can I purchase with pre-sales design assistance?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe DCX-3x1-TPX-TX10 is available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. The team can assist with network topology planning, TPX receiver selection, and USB device compatibility verification.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":45538547499244,"sku":"91310095","price":2838.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-dcx-3x1-tpx-tx10-usb-type-c-and-hdmi-transmitter-switcher-91310095-creation-networks-44411.png?v=1757939156"},{"product_id":"lightware-hdmi-tpx-tx209dk-avx-non-switchable-hdmi-2-0-extender-91580009","title":"Lightware HDMI-TPX-TX209DK AVX (non-switchable) HDMI 2.0 extender - 91580009 (Discontinued)","description":"\u003cp\u003e\u003cstrong\u003eExpected Q3 2024\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe HDMI-TPX-TX209DK and HDMI-TPX-RX209DK extenders with AVX technology are Lightware’s newest development and a natural progression from the widely popular HDMI-TPS-TX\/RX96 series, allowing users to extend HDMI 2.0 signals up to 4K60 4:4:4 video resolution through a single CATx cable over distances up to 100 meters.\u003c\/p\u003e\n\u003cp\u003eLocal monitor loop out and audio de-embedding to Dante network on the transmitter; HDMI output and audio de-embedding to Dante network on the receiver side.\u003c\/p\u003e\n\u003cp\u003eBeyond the benefits of sending high-resolution video over long distances, the extenders are also capable to handle various connectivity standards, including USB-HID for extending keyboard and mouse, bi-directional RS-232, command injection over IR (output only) as well as sending and receiving PoE remote powering.\u003c\/p\u003e\n\u003cp\u003eHDCP 2.3 and basic EDID management functionality are also among the features offered by these devices, such as their connectivity and easy integration into a wide range of AV operations and with 3rd party devices, such as the Christie Terra projector.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli class=\"highlighted-item\"\u003eSupports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eBi-directional RS-232 extension (pass-through)\u003c\/li\u003e\n\u003cli\u003eHDCP 2.3 compliant (transparent pass-through)\u003c\/li\u003e\n\u003cli\u003eGreat price\/value balance\u003c\/li\u003e\n\u003cli\u003eHDMI 2.0 end-to-end extension\u003c\/li\u003e\n\u003cli\u003eBi-directional PoC remote powering\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eExtends HDMI 2.0, audio, Ethernet, RS-232 up to 100m over one CATx cable\u003c\/li\u003e\n\u003cli\u003eEthernet extension (1 Gbps)\u003c\/li\u003e\n\u003cli\u003eCommand injection through IR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":45538870886636,"sku":"91580009","price":1150.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx209dk-avx-non-switchable-hdmi-2-0-extender-91580008-discontinued-creation-networks-92537.png?v=1757939191"},{"product_id":"lightware-hdmi-tpx-rx209dk-avx-non-switchable-hdmi-2-0-extender","title":"Lightware HDMI-TPX-RX209DK  AVX (non-switchable) HDMI 2.0 extender - 91580008 (Discontinued)","description":"\u003cp\u003e\u003cstrong\u003eExpected Q3 2024\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe HDMI-TPX-TX209DK and HDMI-TPX-RX209DK extenders with AVX technology are Lightware’s newest development and a natural progression from the widely popular HDMI-TPS-TX\/RX96 series, allowing users to extend HDMI 2.0 signals up to 4K60 4:4:4 video resolution through a single CATx cable over distances up to 100 meters.\u003c\/p\u003e\n\u003cp\u003eLocal monitor loop out and audio de-embedding to Dante network on the transmitter; HDMI output and audio de-embedding to Dante network on the receiver side.\u003c\/p\u003e\n\u003cp\u003eBeyond the benefits of sending high-resolution video over long distances, the extenders are also capable to handle various connectivity standards, including USB-HID for extending keyboard and mouse, bi-directional RS-232, command injection over IR (output only) as well as sending and receiving PoE remote powering.\u003c\/p\u003e\n\u003cp\u003eHDCP 2.3 and basic EDID management functionality are also among the features offered by these devices, such as their connectivity and easy integration into a wide range of AV operations and with 3rd party devices, such as the Christie Terra projector.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli class=\"highlighted-item\"\u003eSupports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eBi-directional RS-232 extension (pass-through)\u003c\/li\u003e\n\u003cli\u003eHDCP 2.3 compliant (transparent pass-through)\u003c\/li\u003e\n\u003cli\u003eGreat price\/value balance\u003c\/li\u003e\n\u003cli\u003eHDMI 2.0 end-to-end extension\u003c\/li\u003e\n\u003cli\u003eBi-directional PoC remote powering\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eExtends HDMI 2.0, audio, Ethernet, RS-232 up to 100m over one CATx cable\u003c\/li\u003e\n\u003cli\u003eEthernet extension (1 Gbps)\u003c\/li\u003e\n\u003cli\u003eCommand injection through IR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":45538875441388,"sku":"91580008","price":1150.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx209dk-avx-non-switchable-hdmi-2-0-extender-91580008-discontinued-creation-networks-92537.png?v=1757939191"},{"product_id":"lightware-hdmi-tpx-rx107a-sr-sdvoe-compatible-hdmi-2-0-scaling-receiver-91580014","title":"Lightware  HDMI-TPX-RX107A-SR SDVoE compatible HDMI 2.0 scaling receiver - 91580014","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Lightware HDMI-TPX-RX107A-SR is an SDVoE-compatible HDMI 2.0 scaling receiver designed for high-performance AV-over-IP distribution over standard 10GbE networks. It receives compressed or uncompressed video streams from SDVoE-compliant encoders and outputs a scaled HDMI 2.0 signal to local displays, supporting resolutions up to 4K60 4:4:4. The built-in scaler makes it well-suited for multi-resolution display environments in corporate AV-over-IP installations, broadcast facilities, and unified communications rooms.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe HDMI-TPX-RX107A-SR operates within the SDVoE (Software Defined Video over Ethernet) ecosystem, using zero-frame-latency transport over 10GbE infrastructure to deliver uncompressed 4K video. The integrated output scaler processes incoming streams and adapts them to the native resolution of the connected display, eliminating compatibility issues in mixed-resolution environments. HDMI 2.0 output supports deep color, HDR, and high-frame-rate content. The receiver includes a local HDMI input for direct source connection, enabling flexible signal routing between local and networked sources. Audio de-embedding is supported for analog and digital audio output at the receiver endpoint. EDID management is handled automatically or can be configured manually using Lightware's LW3 protocol, ensuring reliable handshake across diverse source and display combinations. The unit integrates with Lightware's TPS ecosystem, supporting HDBaseT connectivity for downstream distribution to additional displays.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx107a-sr-sdvoe-compatible-hdmi-2-0-scaling-receiver-91580014-creation-networks-39997.png?v=1757939193\" alt=\"Lightware HDMI-TPX-RX107A-SR SDVoE Scaling Receiver front view\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx107a-sr-sdvoe-compatible-hdmi-2-0-scaling-receiver-91580014-creation-networks-39483.png?v=1757939193\" alt=\"Lightware HDMI-TPX-RX107A-SR SDVoE Scaling Receiver connections\"\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSDVoE Compatibility\u003c\/strong\u003e — Operates within the SDVoE Alliance ecosystem for zero-frame-latency 10GbE AV-over-IP distribution\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4K60 4:4:4 HDMI 2.0 Output\u003c\/strong\u003e — Delivers full-bandwidth 4K signals with HDR to connected displays\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Output Scaler\u003c\/strong\u003e — Automatically adapts stream resolution to match the native resolution of the connected display\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLocal HDMI Input\u003c\/strong\u003e — Accepts a direct HDMI source for local switching between networked and local content\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAudio De-embedding\u003c\/strong\u003e — Extracts analog and digital audio at the receiver for connection to separate audio systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAutomatic EDID Management\u003c\/strong\u003e — Reads display capabilities and communicates them upstream to ensure source compatibility\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLW3 Control Protocol\u003c\/strong\u003e — Open TCP\/IP API for integration with Crestron, AMX, Extron, and custom control systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10GbE Network Interface\u003c\/strong\u003e — High-bandwidth interface supports uncompressed 4K transport over standard fiber or copper 10GbE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact 1U Half-Rack Form\u003c\/strong\u003e — Designed for rack or AV cabinet installation in space-constrained equipment rooms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCorporate boardrooms and meeting suites receiving 4K content from centralized SDVoE encoder pools\u003c\/li\u003e\n  \u003cli\u003eBroadcast production facilities distributing uncompressed video over 10GbE infrastructure\u003c\/li\u003e\n  \u003cli\u003eUniversity lecture halls and auditoriums with mixed-resolution display environments requiring output scaling\u003c\/li\u003e\n  \u003cli\u003eCommand and control centers with multi-display video walls fed from AV-over-IP networks\u003c\/li\u003e\n  \u003cli\u003eUnified communications rooms integrating networked AV with local source inputs\u003c\/li\u003e\n  \u003cli\u003eDigital signage installations where a central media server distributes to multiple remote receiver endpoints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNetwork Input\u003c\/td\u003e\n\u003ctd\u003e1x SFP+ (10GbE, SDVoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLocal Input\u003c\/td\u003e\n\u003ctd\u003e1x HDMI 2.0 (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eVideo Output\u003c\/td\u003e\n\u003ctd\u003e1x HDMI 2.0 (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax Output Resolution\u003c\/td\u003e\n\u003ctd\u003e4K (3840x2160) @ 60Hz, 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eHDR Support\u003c\/td\u003e\n\u003ctd\u003eHDR10, HLG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOutput Scaler\u003c\/td\u003e\n\u003ctd\u003eYes, integrated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAudio Output\u003c\/td\u003e\n\u003ctd\u003eAnalog stereo (3.5mm), digital (HDMI embedded)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eLW3 over TCP\/IP, RS-232, IR\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePower Input\u003c\/td\u003e\n\u003ctd\u003e12V DC or PoE+ (IEEE 802.3at)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e≤20W\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eHalf-rack, 1U\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91580014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPX-RX107A-SR\u003c\/th\u003e\n\u003cth\u003eCrestron NVX-D80-IN\u003c\/th\u003e\n\u003cth\u003eExtron NAV E 401 IN\u003c\/th\u003e\n\u003cth\u003eZeeVee ZyPer4K\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eSDVoE (10GbE)\u003c\/td\u003e\n\u003ctd\u003eCrestron NVX proprietary (1GbE)\u003c\/td\u003e\n\u003ctd\u003eExtron NAV proprietary (1GbE)\u003c\/td\u003e\n\u003ctd\u003eSDVoE (10GbE)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIntegrated Scaler\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLocal HDMI Input\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo (encoder-only separate unit)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAudio De-embedding\u003c\/td\u003e\n\u003ctd\u003eYes, analog and digital\u003c\/td\u003e\n\u003ctd\u003eLimited to HDMI embedded\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eOpen LW3, RS-232, IR\u003c\/td\u003e\n\u003ctd\u003eCrestron-only ecosystem\u003c\/td\u003e\n\u003ctd\u003eExtron NAVigator required\u003c\/td\u003e\n\u003ctd\u003eZyPer Management Platform\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNetwork Speed\u003c\/td\u003e\n\u003ctd\u003e10GbE\u003c\/td\u003e\n\u003ctd\u003e1GbE\u003c\/td\u003e\n\u003ctd\u003e1GbE\u003c\/td\u003e\n\u003ctd\u003e10GbE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCompression\u003c\/td\u003e\n\u003ctd\u003eUncompressed (SDVoE) or JPEG 2000\u003c\/td\u003e\n\u003ctd\u003eCompressed proprietary\u003c\/td\u003e\n\u003ctd\u003eCompressed proprietary\u003c\/td\u003e\n\u003ctd\u003eUncompressed (SDVoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eDoes this receiver require a specific SDVoE encoder brand, or is it compatible with any SDVoE device?\u003c\/dt\u003e\n  \u003cdd\u003eThe HDMI-TPX-RX107A-SR is SDVoE Alliance certified, which means it can interoperate with any encoder that also carries SDVoE certification. Full feature sets — such as integrated scaling and EDID management — are validated when used with Lightware VINX encoders.\u003c\/dd\u003e\n  \u003cdt\u003eWhat type of switch is required for SDVoE operation?\u003c\/dt\u003e\n  \u003cdd\u003eSDVoE requires a 10GbE managed switch with support for IGMP snooping and multicast routing. Switches from Cisco, Arista, and Brocade are commonly deployed. Each port must support 10Gbps throughput for uncompressed 4K transport.\u003c\/dd\u003e\n  \u003cdt\u003eCan the integrated scaler downscale 4K sources to 1080p displays?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The output scaler supports downscaling from 4K to any lower resolution, including 1080p, 1080i, and 720p. This allows a single encoder pool to serve displays of different resolutions without additional conversion hardware.\u003c\/dd\u003e\n  \u003cdt\u003eIs the local HDMI input switchable with the network stream?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The local HDMI input and the SDVoE network input can be switched under control system command using the LW3 protocol, allowing operators to select between local and network sources at each endpoint.\u003c\/dd\u003e\n  \u003cdt\u003eDoes the unit support audio-only routing independent of video?\u003c\/dt\u003e\n  \u003cdd\u003eAudio de-embedding is available at the output. For fully independent audio routing, the Dante\/AES67 variant of Lightware encoders is recommended to route audio separately over the IP network.\u003c\/dd\u003e\n  \u003cdt\u003eWhat happens if the 10GbE network connection is lost?\u003c\/dt\u003e\n  \u003cdd\u003eThe unit will fall back to the local HDMI input if configured to do so, or display a blank output with a status indicator. The LW3 control interface will report the connection state to the control system for monitoring and alerting.\u003c\/dd\u003e\n  \u003cdt\u003eWhere can I purchase the matching SDVoE encoder to complete a system?\u003c\/dt\u003e\n  \u003cdd\u003eCreation Networks stocks Lightware SDVoE encoders and can configure matched encoder\/receiver systems. Visit \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e or contact our team directly for system design support.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":45538885107948,"sku":"91580014","price":1897.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx107a-sr-sdvoe-compatible-hdmi-2-0-scaling-receiver-91580014-creation-networks-39997.png?v=1757939193"},{"product_id":"lightware-hdmi-tpx-rx107au2k-sr-sdvoe-compatible-hdmi-2-0-scaling-receiver-91580015","title":"Lightware HDMI-TPX-RX107AU2K-SR SDVoE compatible HDMI 2.0 scaling receiver - 91580015","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPX-RX107AU2K-SR is an SDVoE-based HDMI 2.0 scaling receiver designed to receive video, audio, Ethernet, RS-232, and USB 2.0 signals from a compatible SDVoE transmitter over a direct CAT6A copper connection. Its integrated scaler makes it suitable for installations where the source resolution does not match the display's native resolution, allowing uninterrupted output regardless of input format changes. USB 2.0 reverse transmission supports cameras, microphones, touchscreens, and HID peripherals at the receiver end.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe RX107AU2K-SR connects to the transmitter end (such as the Lightware HDMI-TPX-TX209AK or HDMI-TPX-TX209AU2K) via a direct CAT6A link, operating in a point-to-point SDVoE configuration rather than a switched network. This direct-cable approach provides deterministic, zero-configuration signal transport with the full bandwidth required for HDMI 2.0 at 4K UHD 60Hz, up to 18 Gbps.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx107au2k-sr-sdvoe-compatible-hdmi-2-0-scaling-receiver-91580015-creation-networks-83481.png?v=1757939200\" alt=\"Lightware HDMI-TPX-RX107AU2K-SR SDVoE Scaling Receiver\"\u003e\u003c\/p\u003e\u003cp\u003eThe built-in scaler converts the incoming signal to the display's EDID-preferred resolution or a custom configured output resolution, enabling mixed-display environments where source and display resolutions differ. USB 2.0 is transmitted in the reverse direction through the same CAT6A cable, giving users at the display end access to the source computer without additional USB extenders. Power can be supplied via PoE (IEEE 802.3af) from the transmitter, eliminating the need for a local power supply in many installations.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated scaler\u003c\/strong\u003e — converts incoming signal to EDID-preferred or custom resolution for display compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSDVoE point-to-point transport\u003c\/strong\u003e — direct CAT6A connection to compatible Lightware transmitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 2.0 output\u003c\/strong\u003e — 4K UHD 60Hz RGB 4:4:4 and YCbCr 4:4:4, up to 18 Gbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB 2.0 bidirectional\u003c\/strong\u003e — supports cameras, microphones, touchscreens, pen drives, keyboard and mouse from the receiver end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE powered (IEEE 802.3af)\u003c\/strong\u003e — remote power via CAT cable eliminates local PSU requirement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDR and Low Latency Dolby Vision\u003c\/strong\u003e — full HDR format support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.3 compliant\u003c\/strong\u003e — passes content protection for 4K sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and Ethernet pass-through\u003c\/strong\u003e — control and network access at the display location\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHuddle rooms and small meeting spaces with mixed display types requiring resolution scaling\u003c\/li\u003e\n\u003cli\u003eLecture podiums with touchscreen USB peripherals connected at the display end\u003c\/li\u003e\n\u003cli\u003eCorporate video conferencing systems with camera and microphone USB input at the far end\u003c\/li\u003e\n\u003cli\u003eInstallations requiring PoE-powered remote receivers without local power infrastructure\u003c\/li\u003e\n\u003cli\u003eDigital signage with USB-connected interactive displays\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eSDVoE HDMI 2.0 Scaling Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Interface (Input)\u003c\/td\u003e\n\u003ctd\u003eRJ45 (CAT6A direct, SDVoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP Compliance\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution (Input\/Output)\u003c\/td\u003e\n\u003ctd\u003e4096x2048@60Hz 4:4:4; 3840x2160@60Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Space\u003c\/td\u003e\n\u003ctd\u003eRGB, YCbCr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Latency\u003c\/td\u003e\n\u003ctd\u003e0 frames\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Formats\u003c\/td\u003e\n\u003ctd\u003eAll HDMI 2.0 formats incl. multi-channel PCM, Dolby TrueHD, DTS-HD MA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Output\u003c\/td\u003e\n\u003ctd\u003e5-pole Phoenix connector, 2-ch PCM, 48kHz, -78dB to 0dB volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB (Composite Mode)\u003c\/td\u003e\n\u003ctd\u003e2x USB-A female, USB 2.0, HID class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB (Transparent Mode)\u003c\/td\u003e\n\u003ctd\u003e4x USB-A female, USB 2.0, multi-class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003ePower adaptor or PoE (IEEE 802.3af PD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Standard\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3af (PD — receives power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e138 W x 151.8 D x 26 H mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003e1 mm steel, passive cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUL, CE, HDCP 2.3, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriterion\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPX-RX107AU2K-SR\u003c\/th\u003e\n\u003cth\u003eExtron XTP CR 84 4K\u003c\/th\u003e\n\u003cth\u003eCrestron DM-RMC-4K-SCALER-C\u003c\/th\u003e\n\u003cth\u003eKramer EXT3-11-SR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eScaler Included\u003c\/td\u003e\n\u003ctd\u003eYes — EDID-preferred or custom\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo — separate unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB 2.0 Bidirectional\u003c\/td\u003e\n\u003ctd\u003eYes — 6x USB-A (composite + transparent)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Powered\u003c\/td\u003e\n\u003ctd\u003eYes — IEEE 802.3af PD\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 18 Gbps\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.3\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Signals\u003c\/td\u003e\n\u003ctd\u003eRS-232 + Ethernet pass-through\u003c\/td\u003e\n\u003ctd\u003eRS-232 + IR\u003c\/td\u003e\n\u003ctd\u003eRS-232 + IR + Ethernet\u003c\/td\u003e\n\u003ctd\u003eRS-232 + IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eSDVoE direct CAT6A\u003c\/td\u003e\n\u003ctd\u003eXTP proprietary\u003c\/td\u003e\n\u003ctd\u003eHDBaseT proprietary\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhich transmitters are compatible with the RX107AU2K-SR?\u003c\/dt\u003e\n\u003cdd\u003eThe receiver is designed for use with the Lightware HDMI-TPX-TX209AK and HDMI-TPX-TX209AU2K transmitters in a direct point-to-point CAT6A connection.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable length is supported over CAT6A?\u003c\/dt\u003e\n\u003cdd\u003eRefer to the Lightware HDMI-TPX-RX107AU2K-SR datasheet for the maximum supported distance over CAT6A. For most installations, 100m is achievable at full resolution.\u003c\/dd\u003e\n\u003cdt\u003eCan the scaler handle all input resolutions?\u003c\/dt\u003e\n\u003cdd\u003eThe scaler supports scaling to EDID-preferred or custom resolution with some limitations at very low output resolutions when the source is 4K. See the scaling limitations note in the Lightware datasheet for specific exclusions.\u003c\/dd\u003e\n\u003cdt\u003eHow many USB devices can be connected at the receiver end?\u003c\/dt\u003e\n\u003cdd\u003eUp to 6 USB-A ports total: 2 in composite (HID) mode and 4 in transparent mode. Supported device classes include HID, audio, video, mass storage, smart card, and hub.\u003c\/dd\u003e\n\u003cdt\u003eDoes PoE eliminate the need for a power supply entirely?\u003c\/dt\u003e\n\u003cdd\u003eYes, when the transmitter provides PoE, the receiver can operate without a local power adaptor. The included power adaptor provides an alternative where PoE is not available.\u003c\/dd\u003e\n\u003cdt\u003eIs this product available for immediate shipment?\u003c\/dt\u003e\n\u003cdd\u003eContact \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e for current stock and lead time information for the HDMI-TPX-RX107AU2K-SR.\u003c\/dd\u003e\n\u003cdt\u003eWhat is the warranty on this unit?\u003c\/dt\u003e\n\u003cdd\u003eLightware provides a 3-year warranty. Creation Networks supports warranty claims for all Lightware products sold through our store.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":45538888614124,"sku":"91580015","price":2557.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tpx-rx107au2k-sr-sdvoe-compatible-hdmi-2-0-scaling-receiver-91580015-creation-networks-83481.png?v=1757939200"},{"product_id":"lightware-hdmi-ucx-tpx-rx107-ucx-matrix-switcher-receiver-91580010","title":"Lightware HDMI-UCX-TPX-RX107 UCX Matrix Switcher Receiver - 91580010","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-UCX-TPX-RX107 is the receiver endpoint of the UCX Matrix system, designed for deployment in scalable AV-over-twisted-pair matrix installations. It receives HDMI 2.0 signals over Lightware's proprietary TPX (Twisted Pair Extender) cabling infrastructure, supporting resolutions up to 4K60 4:4:4. Purpose-built for corporate AV environments, higher education campuses, and broadcast facilities requiring centralized matrix routing over structured cabling.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe HDMI-UCX-TPX-RX107 operates as a remote receiver node within the Lightware UCX Matrix ecosystem, terminating TPX extender links from the central matrix frame. It outputs HDMI 2.0 at the display end, delivering uncompressed 4K HDR video and multi-channel audio without perceptible latency. The unit supports HDCP 2.2 end-to-end, ensuring compatibility with protected content workflows.\u003c\/p\u003e\u003cp\u003ePower over the link (PoL) allows the receiver to be powered directly from the matrix without local power supplies at the display location, simplifying installation in wall plates, huddle rooms, and ceiling-mounted display positions. The device integrates RS-232 and IR pass-through channels for remote control of connected displays, and Ethernet extension provides network connectivity to the display endpoint over the same TPX cable. LW3 protocol support allows integration with control systems including Crestron, AMX, Extron, and Lightware's own EDID Manager software.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/HDMI-UCX-TPX-RX107_Front_Rear-Axono_1.png?v=1757951484\" alt=\"Lightware HDMI-UCX-TPX-RX107 UCX Matrix Receiver front and rear view\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/UCX_2x1_TPX_RX107.png?v=1757951485\" alt=\"Lightware UCX Matrix TPX RX107 system diagram\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/HDMI-UCX-TPX-RX107_Front-Axono.png?v=1757951487\" alt=\"Lightware HDMI-UCX-TPX-RX107 front panel\"\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 2.0 Output\u003c\/strong\u003e — Delivers 4K60 4:4:4 18 Gbps video to connected displays with full HDR10 support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUCX Matrix Integration\u003c\/strong\u003e — Native receiver node for Lightware UCX Matrix frames, scalable from small rooms to campus-wide deployments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPX Link Technology\u003c\/strong\u003e — Extends signals over a single CATx cable from the central matrix to the display location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.2 Compliant\u003c\/strong\u003e — Supports protected content playback from Blu-ray, streaming devices, and secure presentation sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower over Link (PoL)\u003c\/strong\u003e — Eliminates the need for a local power supply at the display endpoint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Extension\u003c\/strong\u003e — Bidirectional control pass-through for display management from the matrix room\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet Extension\u003c\/strong\u003e — Extends a network port to the display location over the TPX infrastructure cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLW3 Protocol Support\u003c\/strong\u003e — Full integration with third-party control systems via Lightware's open control protocol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — Configurable EDID emulation ensures reliable source-to-display handshaking across the matrix\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor\u003c\/strong\u003e — Designed for wall-plate, rack-shelf, or behind-display mounting at the endpoint\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCorporate headquarters AV matrix distribution to conference rooms and huddle spaces\u003c\/li\u003e\n\u003cli\u003eHigher education lecture halls and seminar rooms fed from a central media server rack\u003c\/li\u003e\n\u003cli\u003eBroadcast control rooms distributing production feeds to remote monitor walls\u003c\/li\u003e\n\u003cli\u003eGovernment and secure facilities requiring HDCP-compliant distribution\u003c\/li\u003e\n\u003cli\u003eHotels and hospitality venues with centralized AV infrastructure\u003c\/li\u003e\n\u003cli\u003eHealthcare facilities delivering patient education or wayfinding content\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Standard\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Resolution\u003c\/td\u003e\n\u003ctd\u003e4K (3840×2160) @ 60 Hz, 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDR Support\u003c\/td\u003e\n\u003ctd\u003eHDR10, HLG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Data Rate\u003c\/td\u003e\n\u003ctd\u003e18 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 1.4, HDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio\u003c\/td\u003e\n\u003ctd\u003eHDMI embedded multi-channel audio (up to 7.1 PCM, Dolby TrueHD, DTS-HD MA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLink Type\u003c\/td\u003e\n\u003ctd\u003eLightware TPX (proprietary over CATx)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet (via TPX link)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePower over Link (PoL) from UCX Matrix frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable EDID emulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-UCX-TPX-RX107\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 18 Gbps\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 18 Gbps\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0 (limited bandwidth)\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0 at max range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eFull end-to-end HDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eFull HDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2 supported\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2 supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Ecosystem\u003c\/td\u003e\n\u003ctd\u003eNative UCX Matrix node — no adapter required\u003c\/td\u003e\n\u003ctd\u003eDesigned for Crestron NVX or DM matrix systems\u003c\/td\u003e\n\u003ctd\u003eRequires Extron DTP CrossPoint matrix\u003c\/td\u003e\n\u003ctd\u003eWorks with Kramer VS-series matrices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower over Link\u003c\/td\u003e\n\u003ctd\u003ePoL from matrix — no local PSU needed\u003c\/td\u003e\n\u003ctd\u003ePoE+ from matrix or switch\u003c\/td\u003e\n\u003ctd\u003ePoE from DTP switch or matrix\u003c\/td\u003e\n\u003ctd\u003ePoE or local PSU depending on config\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Pass-through\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet over single CATx\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet via DM cable\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR via DTP cable\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR via CATx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable via LW3 or EDID Manager software\u003c\/td\u003e\n\u003ctd\u003eManaged via Crestron toolbox\u003c\/td\u003e\n\u003ctd\u003eManaged via Extron SMP software\u003c\/td\u003e\n\u003ctd\u003eManaged via Kramer K-Upload\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eOpen LW3 protocol — integrates with any system\u003c\/td\u003e\n\u003ctd\u003eProprietary Crestron control required\u003c\/td\u003e\n\u003ctd\u003eSIS commands; integrates with third-party systems\u003c\/td\u003e\n\u003ctd\u003eRS-232 and IP commands; third-party compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice Point\u003c\/td\u003e\n\u003ctd\u003eMid-range; no license fees for LW3 integration\u003c\/td\u003e\n\u003ctd\u003eHigher cost; Crestron licensing may apply\u003c\/td\u003e\n\u003ctd\u003eCompetitive; Extron support included\u003c\/td\u003e\n\u003ctd\u003eCompetitive with broad compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat matrix frame does the HDMI-UCX-TPX-RX107 connect to?\u003c\/dt\u003e\n\u003cdd\u003eThe RX107 is a receiver endpoint for Lightware UCX Matrix frames equipped with TPX output cards. It does not operate as a standalone extender — it requires a UCX Matrix frame on the transmitter side.\u003c\/dd\u003e\n\u003cdt\u003eDoes this receiver require a local power supply at the display location?\u003c\/dt\u003e\n\u003cdd\u003eNo. The unit receives power directly from the UCX Matrix frame via Power over Link (PoL) on the TPX cable, eliminating the need for a local power adapter at the endpoint.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable type does the TPX link use?\u003c\/dt\u003e\n\u003cdd\u003eThe TPX link operates over standard CATx (Cat5e, Cat6, or Cat6a) structured cabling, which is typically already present in commercial building infrastructure.\u003c\/dd\u003e\n\u003cdt\u003eCan I control a display connected to the RX107 from the central rack?\u003c\/dt\u003e\n\u003cdd\u003eYes. The receiver passes RS-232 and IR signals bidirectionally over the TPX cable, allowing display power, input selection, and volume control from the matrix room or control system.\u003c\/dd\u003e\n\u003cdt\u003eIs HDCP 2.2 supported for premium content playback?\u003c\/dt\u003e\n\u003cdd\u003eYes. The RX107 supports HDCP 2.2 end-to-end, making it suitable for distributing premium protected content from Blu-ray players, streaming appliances, and secure presentation sources.\u003c\/dd\u003e\n\u003cdt\u003eHow does EDID management work in a UCX Matrix system?\u003c\/dt\u003e\n\u003cdd\u003eEDID is managed at the matrix level using Lightware's EDID Manager software or via LW3 protocol commands. The RX107 can emulate a specific EDID toward the source to ensure reliable signal negotiation regardless of the connected display's capabilities.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the HDMI-UCX-TPX-RX107?\u003c\/dt\u003e\n\u003cdd\u003eThe Lightware HDMI-UCX-TPX-RX107 is available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller providing commercial AV solutions and integration support.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":46732134449388,"sku":"91580010","price":1963.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/HDMI-UCX-TPX-RX107_Front_Rear-Axono_1.png?v=1757951484"},{"product_id":"lightware-ucx-4x3-tpx-tx20-usb-type-c-and-hdmi-matrix-switcher-transmitter-91310091","title":"Lightware UCX-4x3-TPX-TX20 USB Type-C and HDMI Matrix Switcher Transmitter - 91310091","description":"\u003ch1\u003eLightware UCX-4x3-TPX-TX20 – USB-C HDMI Matrix Switcher Transmitter for TPX HDBaseT\u003c\/h1\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Lightware UCX-4x3-TPX-TX20 is a USB Type-C and HDMI 2.0 matrix switcher transmitter that combines the Taurus UCX BYOD collaboration platform with a Taurus TPX HDBaseT output, enabling AV extension over structured cabling to TPX-compatible receivers. The device accepts 4 inputs (2x HDMI 2.0, 2x USB-C) and switches selected video, audio, USB, and control signals to a local HDMI 2.0 output and simultaneously to the TPX HDBaseT output, distributing content to one or more display endpoints over CAT cabling. AV integrators specifying a Lightware UCX USB-C matrix switcher with HDBaseT output for conference rooms, training rooms, or boardrooms with CAT-based AV distribution infrastructure will find the UCX-4x3-TPX-TX20 a precise fit. Buy at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe UCX-4x3-TPX-TX20 is part of Lightware's Taurus UCX product family, integrating the full UCX USB-C switching and USB peripheral management capability with a TPX HDBaseT transmitter output. This makes it suitable for installations where structured CAT cabling serves as the distribution medium and SDVoE\/10G networking is not required or available.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/UCX-4x3-TPX_TX20_Front-Rear-Axono.png?v=1757951490\" alt=\"Lightware UCX-4x3-TPX-TX20 front and rear\" style=\"max-width:100%;\"\u003e\n\n\u003cp\u003eThe two HDMI 2.0 inputs accept room-installed sources such as room PCs, video codecs, or media players. The two USB-C inputs handle laptop or mobile device connections with simultaneous 4K video, audio, USB 2.0 data, and up to 100W power delivery over a single cable. The device selects from these inputs and transmits the result to the local HDMI output and the TPX HDBaseT link to connected receivers.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/UCX-4x3-TPX-TX20_Rear-Axono.png?v=1757951491\" alt=\"UCX-4x3-TPX-TX20 rear connectors\" style=\"max-width:100%;\"\u003e\n\n\u003cp\u003eUSB 2.0 peripheral switching supports cameras, speakerphones, and HID devices connected to USB-A ports, routed independently from video between active hosts. Control options include RS-232, GPIO, Ethernet, and OCS. The device supports 5K (5120x2160) at 30Hz 4:4:4 or 60Hz 4:2:0 via HDMI 2.0. Remote Syslog supports SIEM integration. Purchase the UCX-4x3-TPX-TX20 at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/4x3_TPX_3x3_MTR_Barco_KVMWired.png?v=1757951494\" alt=\"UCX-4x3-TPX-TX20 application diagram MTR\" style=\"max-width:100%;\"\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Input with 100W Power Delivery\u003c\/strong\u003e — Two USB-C inputs each supply up to 100W laptop charging while simultaneously transmitting 4K video, audio, and USB 2.0 data over a single cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPX HDBaseT Transmitter Output\u003c\/strong\u003e — Transmits selected AV signals over CAT5e\/6\/7 structured cabling to TPX-compatible receivers, avoiding the need for 10G networking infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Input Matrix Switching\u003c\/strong\u003e — Routes 2x HDMI 2.0 and 2x USB-C inputs to a local HDMI output and the TPX HDBaseT link simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5K Resolution Support\u003c\/strong\u003e — Accepts 5120x2160 at 30Hz 4:4:4 or 60Hz 4:2:0 from HDMI 2.0 sources for ultrawide display deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependent USB 2.0 Switching Layer\u003c\/strong\u003e — Routes cameras, speakerphones, and USB-HID peripherals between hosts independently from video switching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaurus TPX Ecosystem Compatibility\u003c\/strong\u003e — Operates as a transmitter endpoint within Lightware's TPX AV distribution ecosystem, compatible with TPX receiver variants and MX2M matrix integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Syslog\u003c\/strong\u003e — Forwards device events to external SIEM systems via TCP, UDP, or TLS (RFC3164 \/ RFC5424).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePixel Accurate Reclocking\u003c\/strong\u003e — 0-frame video delay on all input paths with signal integrity management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 1.4 and 2.2\u003c\/strong\u003e — Full HDCP compliance on all input and output paths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Inputs\u003c\/td\u003e\n\u003ctd\u003e2x HDMI 2.0 (Type A, screw-lock), 2x USB-C (DP 1.2a Alt Mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Output (local)\u003c\/td\u003e\n\u003ctd\u003e1x HDMI 2.0 (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Output\u003c\/td\u003e\n\u003ctd\u003eTPX HDBaseT over CAT5e\/6\/7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution (USB-C)\u003c\/td\u003e\n\u003ctd\u003e4096x2160@60Hz RGB 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution (HDMI)\u003c\/td\u003e\n\u003ctd\u003e4096x2160@60Hz RGB 4:4:4; 18Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5K Resolution\u003c\/td\u003e\n\u003ctd\u003e5120x2160@30Hz 4:4:4 or @60Hz 4:2:0 via HDMI 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 1.4, HDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-C Power Delivery\u003c\/td\u003e\n\u003ctd\u003eUp to 100W per port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Host Ports\u003c\/td\u003e\n\u003ctd\u003e1x USB-C, 1x USB-B; USB 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Device Ports\u003c\/td\u003e\n\u003ctd\u003e4x USB-A; USB 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Output\u003c\/td\u003e\n\u003ctd\u003e5-pole Phoenix, 2-ch PCM, 48 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232\u003c\/td\u003e\n\u003ctd\u003e3-pole Phoenix, 9600–115200 baud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO\u003c\/td\u003e\n\u003ctd\u003e8-pole Phoenix, 6 configurable pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Delay\u003c\/td\u003e\n\u003ctd\u003e0 frames\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e271 x 140.3 x 26 mm (W x D x H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0° to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e91310091\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eFull electrical specifications including HDBaseT extension distance are available at \u003ca href=\"https:\/\/www.lightware.com\/en\/products\/Matrix-Switchers\/ucx-4x3-tpx-tx20\"\u003elightware.com\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware UCX-4x3-TPX-TX20\u003c\/th\u003e\n\u003cth\u003eCrestron HD-MD4X2-4KZ-E\u003c\/th\u003e\n\u003cth\u003eExtron SW 4 HDMI 4K\u003c\/th\u003e\n\u003cth\u003eKramer VS-41H2\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT Output\u003c\/td\u003e\n\u003ctd\u003eYes — TPX HDBaseT transmitter output over CAT\u003c\/td\u003e\n\u003ctd\u003eOptional HDBaseT output on some variants\u003c\/td\u003e\n\u003ctd\u003eNo — HDMI outputs only\u003c\/td\u003e\n\u003ctd\u003eNo — HDMI outputs only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-C with PD\u003c\/td\u003e\n\u003ctd\u003eYes — 2x USB-C, 100W each\u003c\/td\u003e\n\u003ctd\u003eNo native USB-C\u003c\/td\u003e\n\u003ctd\u003eNo USB-C\u003c\/td\u003e\n\u003ctd\u003eNo USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5K Support\u003c\/td\u003e\n\u003ctd\u003eYes — 5120x2160 via HDMI 2.0\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Peripheral Switching\u003c\/td\u003e\n\u003ctd\u003eYes — independent USB 2.0 layer\u003c\/td\u003e\n\u003ctd\u003eUSB via HDBaseT output only\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInfrastructure Required\u003c\/td\u003e\n\u003ctd\u003eCAT5e\/6\/7 structured cabling\u003c\/td\u003e\n\u003ctd\u003eCAT (HDBaseT variant) or HDMI\u003c\/td\u003e\n\u003ctd\u003eHDMI only\u003c\/td\u003e\n\u003ctd\u003eHDMI only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e1.4 and 2.2\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSyslog Support\u003c\/td\u003e\n\u003ctd\u003eYes — RFC3164\/RFC5424 via TCP\/UDP\/TLS\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the difference between the UCX-4x3-TPX-TX20 and UCX-4x3-TPN-TX20?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe TPX-TX20 distributes AV signals over HDBaseT via CAT structured cabling to TPX-compatible receivers. The TPN-TX20 distributes over 10G Ethernet using SDVoE technology to TPN IP-based receivers. The TPX variant is the right choice for CAT-cabled buildings without 10G networking; the TPN variant suits IP-based AV over IP infrastructure.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eDoes the USB-C input charge a connected laptop during a meeting?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Each USB-C input supports up to 100W power delivery, maintaining laptop battery charge throughout the meeting without requiring a separate wall adapter at the table.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eCan the UCX-4x3-TPX-TX20 work with Lightware MX2M matrices?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The UCX-4x3-TPX-TX20 can operate as an input endpoint within a Lightware MX2M-based system via the TPX card (MX2M-4TPX-IB), enabling the UCX's source selection and USB switching to feed the larger matrix.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eWhat USB peripherals can be connected to the device?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe four USB-A device ports support cameras, speakerphones, touch displays, USB-HID controllers, and other USB 2.0 peripherals. These are routed independently from video to whichever USB-C or USB-B host is active.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eIs remote management and logging supported?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The device supports remote Syslog via TCP, UDP, or TLS (RFC3164 and RFC5424), enabling integration with enterprise SIEM and network monitoring platforms for centralized device event logging.\u003c\/dd\u003e\n\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase the Lightware UCX-4x3-TPX-TX20?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe UCX-4x3-TPX-TX20 is available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller for commercial AV projects.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":46732153520364,"sku":"91310091","price":5032.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/UCX-4x3-TPX_TX20_Front-Rear-Axono.png?v=1757951490"},{"product_id":"lightware-hdmi-tpx-rx107d-full-4k-hdmi-2-0-tpx-receiver-with-rs-232-ir-ethernet-and-poe-remote-powering-poe-receive-supports-4k-uhd-60hz-rgb-4-4-4-up-to-18-gbps-hdcp-2-2-dante-audio-output","title":"Lightware HDMI-TPX-RX107D – Full 4K HDMI 2.0 TPX Receiver","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPX-RX107D is the receiver counterpart to the HDMI-TPX-TX107D, completing a full 4K HDMI 2.0 point-to-point extension link over the TPX infrastructure. It receives the TPX signal and outputs HDMI 2.0 at up to 4K UHD 60Hz RGB 4:4:4 with 18Gbps bandwidth, supporting HDCP 2.2 and HDR content. RS-232, IR, and Ethernet pass-through and PoE supply to the transmitter are included, and a Dante audio output enables IP audio integration. Part number 91580016 series.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe HDMI-TPX-RX107D operates at the display end of a TPX signal extension system. It receives the fiber or shielded copper TPX signal from the transmitter and reconstructs the full HDMI 2.0 output for connection to a 4K display, projector, or video processor. Paired with the HDMI-TPX-TX107D transmitter, it forms a complete, transparent 4K 60Hz extension link with no image quality loss.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91580016_1.png\" alt=\"Lightware HDMI-TPX-RX107D 4K HDMI 2.0 TPX Receiver front view\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003ePoE supply capability means the receiver powers the remote transmitter over the TPX cable, eliminating the need for a local power supply at the source end of the run. The Dante audio output on the receiver side extracts audio from the HDMI stream for independent routing to IP audio systems.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91580016.png\" alt=\"Lightware HDMI-TPX-RX107D 4K HDMI 2.0 TPX Receiver rear connections\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91580016_2.png\" alt=\"Lightware HDMI-TPX-RX107D 4K HDMI 2.0 TPX Receiver side\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eThe LW3 control protocol enables integration with third-party control systems at the receiver location. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K UHD 60Hz RGB 4:4:4 HDMI 2.0 Output\u003c\/strong\u003e — Full 18Gbps bandwidth output to the connected display with no chroma subsampling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.2 Support\u003c\/strong\u003e — Compatible with protected 4K content from HDCP 2.2 sources through the full extension link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPX Signal Reception\u003c\/strong\u003e — Accepts fiber or shielded STP TPX input from a paired HDMI-TPX-TX107D transmitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Supply to Transmitter\u003c\/strong\u003e — Powers the remote TPX transmitter over the link cable, eliminating source-end power requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante Audio Output\u003c\/strong\u003e — Extracts audio from HDMI for independent routing on a Dante IP audio network\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232, IR, and Ethernet Pass-Through\u003c\/strong\u003e — Bidirectional control extension between transmitter and receiver locations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDR Support\u003c\/strong\u003e — Passes HDR10 and HLG metadata to the connected display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLW3 Control Protocol\u003c\/strong\u003e — Open, documented protocol for integration with commercial AV control systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardroom 4K display receiving extension from a presenter table transmitter\u003c\/li\u003e\n\u003cli\u003eAuditorium and lecture hall 4K projector or display feed\u003c\/li\u003e\n\u003cli\u003eBroadcast studio monitor wall 4K signal reception\u003c\/li\u003e\n\u003cli\u003eMedical imaging 4K review station display connection\u003c\/li\u003e\n\u003cli\u003eCorporate headquarters large-format 4K display from central source\u003c\/li\u003e\n\u003cli\u003eDante-integrated AV installations requiring video extension with IP audio output\u003c\/li\u003e\n\u003cli\u003eMuseum and visitor center 4K exhibit display drive\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003eTPX (fiber or shielded STP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Output\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (Type A), up to 4K UHD 60Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Bandwidth\u003c\/td\u003e\n\u003ctd\u003e18 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2 \/ HDCP 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDR\u003c\/td\u003e\n\u003ctd\u003eHDR10, HLG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Output\u003c\/td\u003e\n\u003ctd\u003eDante IP audio network output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Supply\u003c\/td\u003e\n\u003ctd\u003eYes, powers remote TPX transmitter via link cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Interfaces\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet (LW3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eExternal 12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 to +40 degrees C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPX-RX107D\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RX-101-C-E\u003c\/th\u003e\n\u003cth\u003eExtron XTP R UWP 302\u003c\/th\u003e\n\u003cth\u003eKramer TP-583R\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Resolution\u003c\/td\u003e\n\u003ctd\u003e4K 60Hz 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K 60Hz 4:2:0\u003c\/td\u003e\n\u003ctd\u003e4K 60Hz 4:2:0\u003c\/td\u003e\n\u003ctd\u003e4K 60Hz 4:2:0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Bandwidth\u003c\/td\u003e\n\u003ctd\u003e18 Gbps\u003c\/td\u003e\n\u003ctd\u003e10.2 Gbps\u003c\/td\u003e\n\u003ctd\u003e10.2 Gbps\u003c\/td\u003e\n\u003ctd\u003e10.2 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDante Audio Output\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Supply to Transmitter\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Pass-Through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Pass-Through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW3 open\u003c\/td\u003e\n\u003ctd\u003eCrestron proprietary\u003c\/td\u003e\n\u003ctd\u003eExtron SIS\u003c\/td\u003e\n\u003ctd\u003eKramer protocol 3000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the HDMI-TPX-RX107D need to be paired with the HDMI-TPX-TX107D transmitter?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The TPX receiver and transmitter are designed to work as a matched pair within the Lightware TPX product family. Using mismatched TPX endpoints may result in compatibility or performance issues. Confirm pairing requirements with Creation Networks before ordering.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the receiver supply power to the transmitter?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The PoE supply feature allows the receiver to power the remote HDMI-TPX-TX107D over the TPX link cable, eliminating the need for a separate 12V power supply at the transmitter location.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat cable medium does the TPX link use?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eTPX supports fiber optic and shielded twisted pair (STP) depending on the TPX cable or module type. Fiber offers longer distances and ground loop immunity; STP is a cost-effective option at shorter runs. Confirm cable compatibility with your specific TPX configuration.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat does the Dante audio output do at the receiver?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe Dante output on the receiver extracts audio from the reconstructed HDMI signal and places it on a Dante IP audio network. This allows audio to be independently routed to Dante amplifiers, DSPs, or recording systems without a separate audio extractor.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this compatible with 4K 60Hz 4:4:4 displays?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The receiver outputs full 18Gbps HDMI 2.0, which is required for 4K 60Hz RGB 4:4:4. The end display must also support HDMI 2.0 at that bandwidth to receive the full signal quality.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat control systems integrate with this receiver?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe LW3 protocol supports Crestron, AMX, Savant, Extron, and most commercial AV control platforms via RS-232 or Ethernet. Control from the receiver side is bidirectional, extending through the TPX link to the transmitter location as well.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase the HDMI-TPX-RX107D?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller serving commercial AV integrators across North America.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":46742231220460,"sku":"91580017","price":2227.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91580016_1.png?v=1757952549"},{"product_id":"lightware-hdmi-tpx-tx107d-full-4k-hdmi-2-0-tpx-transmitter-with-rs-232-ir-ethernet-and-poe-remote-powering-poe-receive-supports-4k-uhd-60hz-rgb-4-4-4-up-to-18-gbps-hdcp-2-2-dante-audio-output","title":"LightWare HDMI-TPX-TX107D Full 4K HDMI 2.0 TPX transmitter with RS-232, IR, Ethernet and PoE remote powering (PoE receive); supports 4K UHD @ 60Hz RGB 4:4:4, up to 18 Gbps, HDCP 2.2., Dante audio output.","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPX-TX107D is a full 4K HDMI 2.0 TPX transmitter that extends HDMI 2.0 signals at up to 4K UHD 60Hz RGB 4:4:4 over fiber or CAT cable to a compatible TPX receiver. It supports up to 18Gbps video bandwidth, HDCP 2.2, and includes RS-232, IR, and Ethernet control pass-through, with PoE receive functionality allowing the unit to be remotely powered from the receiver. The Dante audio output enables integration with IP audio distribution networks. Part number 91580016.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe HDMI-TPX-TX107D occupies a well-defined niche in professional AV: installations that need true 4K 60Hz 4:4:4 signal extension beyond the limits of HDMI cable runs, without the operational overhead of an AV-over-IP platform. TPX uses fiber or shielded twisted pair infrastructure to deliver uncompressed HDMI 2.0 signals at full bandwidth over distances not achievable with standard HDMI cabling.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91580016.png\" alt=\"Lightware HDMI-TPX-TX107D 4K HDMI 2.0 TPX Transmitter front view\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eHDCP 2.2 support ensures compatibility with UHD content from streaming devices, 4K Blu-ray players, and other protected sources. The Dante audio output is a distinguishing feature, allowing audio from the HDMI input to be routed to a Dante audio network for distribution or processing independently of the video path.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91580016_1.png\" alt=\"Lightware HDMI-TPX-TX107D 4K HDMI 2.0 TPX Transmitter rear connections\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91580016_2.png\" alt=\"Lightware HDMI-TPX-TX107D 4K HDMI 2.0 TPX Transmitter side panel\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003ePoE receive allows the transmitter to be powered from the receiver unit over the TPX link, eliminating the need for a local power supply at the source end. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K UHD 60Hz RGB 4:4:4 at 18Gbps\u003c\/strong\u003e — Full HDMI 2.0 bandwidth supports the highest quality UHD signals without compression or chroma subsampling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.2 Compliance\u003c\/strong\u003e — Compatible with protected UHD content from 4K streaming, Blu-ray, and studio sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPX Transmission\u003c\/strong\u003e — Extends HDMI 2.0 over fiber or shielded structured cabling beyond standard HDMI cable limits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante Audio Output\u003c\/strong\u003e — Extracts audio from the HDMI source and distributes it over an IP audio (Dante) network for flexible audio routing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Receive (Remote Power)\u003c\/strong\u003e — Can be powered from the TPX receiver over the link cable, eliminating local power supply at the transmitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232, IR, and Ethernet Pass-Through\u003c\/strong\u003e — Bidirectional control signal and network extension over the TPX link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDR Support\u003c\/strong\u003e — Passes HDR metadata for compatible display pipelines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Desktop Form Factor\u003c\/strong\u003e — Fits discreetly at the source location without requiring rack space\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardroom 4K presenter station to display extension\u003c\/li\u003e\n\u003cli\u003eBroadcast studio 4K source to production switcher feed\u003c\/li\u003e\n\u003cli\u003eUniversity auditorium podium to projector extension\u003c\/li\u003e\n\u003cli\u003eCorporate headquarters 4K display distribution from central source\u003c\/li\u003e\n\u003cli\u003eMedical imaging 4K signal distribution to review stations\u003c\/li\u003e\n\u003cli\u003eRental and staging 4K signal distribution for live events\u003c\/li\u003e\n\u003cli\u003eDante-enabled AV installations requiring combined video and IP audio distribution\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91580016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Output\u003c\/td\u003e\n\u003ctd\u003eTPX (fiber or shielded STP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Bandwidth\u003c\/td\u003e\n\u003ctd\u003e18 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K UHD 60Hz RGB 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2 \/ HDCP 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDR\u003c\/td\u003e\n\u003ctd\u003eHDR10, HLG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Output\u003c\/td\u003e\n\u003ctd\u003eDante IP audio network output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Interfaces\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet (LW3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eExternal 12V DC or PoE receive via TPX link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 to +40 degrees C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPX-TX107D\u003c\/th\u003e\n\u003cth\u003eCrestron HD-TX-101-C-E\u003c\/th\u003e\n\u003cth\u003eExtron XTP T UWP 302\u003c\/th\u003e\n\u003cth\u003eKramer TP-583T\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K 60Hz 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K 60Hz 4:2:0\u003c\/td\u003e\n\u003ctd\u003e4K 60Hz 4:2:0\u003c\/td\u003e\n\u003ctd\u003e4K 60Hz 4:2:0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Bandwidth\u003c\/td\u003e\n\u003ctd\u003e18 Gbps\u003c\/td\u003e\n\u003ctd\u003e10.2 Gbps\u003c\/td\u003e\n\u003ctd\u003e10.2 Gbps\u003c\/td\u003e\n\u003ctd\u003e10.2 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDante Audio Output\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power (PoE receive)\u003c\/td\u003e\n\u003ctd\u003eYes, via TPX link\u003c\/td\u003e\n\u003ctd\u003eYes, via HDBaseT\u003c\/td\u003e\n\u003ctd\u003eYes, via XTP\u003c\/td\u003e\n\u003ctd\u003eYes, via HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Pass-Through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Pass-Through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW3 open\u003c\/td\u003e\n\u003ctd\u003eCrestron proprietary\u003c\/td\u003e\n\u003ctd\u003eExtron SIS\u003c\/td\u003e\n\u003ctd\u003eKramer protocol 3000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the TPX transmission medium?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eTPX supports both fiber optic and shielded twisted pair (STP) cable, depending on the specific TPX cable or module used. Fiber provides longer distance capability and immunity to ground loops, while STP offers cost advantages at shorter runs. Confirm cable type compatibility with your Lightware TPX receiver.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat maximum distance does the HDMI-TPX-TX107D support?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMaximum distance depends on the cable medium and TPX module used. Fiber configurations support significantly longer runs than copper, with distances exceeding several hundred meters possible on compatible TPX fiber links. Consult Lightware's TPX specification documentation for cable-specific distance limits.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes this transmitter require a local power supply?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNot necessarily. The PoE receive feature allows the transmitter to be powered from the paired TPX receiver over the link cable. If the receiver does not supply PoE, an external 12V DC supply is required at the transmitter location.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat does the Dante audio output enable?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe Dante output extracts embedded audio from the incoming HDMI signal and places it on a Dante IP audio network. This allows the audio to be independently routed to Dante-compatible amplifiers, DSPs, or mixing consoles without additional audio breakout hardware.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs the HDMI-TPX-TX107D compatible with 4K 60Hz 4:4:4 sources?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The unit supports 18Gbps bandwidth, which is the full HDMI 2.0 specification required for 4K 60Hz at full RGB 4:4:4 color. This distinguishes it from many competing extenders limited to 4K 60Hz 4:2:0 or 4K 30Hz.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat control systems are compatible?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe LW3 control protocol is supported by Crestron, AMX, Savant, Extron, and most commercial AV control platforms via RS-232 or Ethernet. Lightware provides driver documentation and third-party modules are available.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase the HDMI-TPX-TX107D?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller serving commercial AV integrators across North America.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":46742231285996,"sku":"91580016","price":2227.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91580016.png?v=1757952548"},{"product_id":"lightware-mx2m-4tpx-ib-cat6a-tpx-compatible-4-channel-input-board-with-poe-for-the-mx2m-modular-matrix-family","title":"LightWare MX2M-4TPX-IB Input Board","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware MX2M-4TPX-IB is a four-port AVX SDVoE input board for the MX2M modular matrix switcher family, providing four RJ45 TPX inputs compatible with the full range of Lightware TPX transmitters and SDVoE-compliant third-party transmitter devices. Each port carries uncompressed HDMI 2.0 video up to 4096x2048@60Hz 4:4:4 (600 MHz pixel clock), multi-channel audio, RS-232, IR, and Ethernet over a single CAT6A cable at 10GBase-T to distances up to 100 meters. The board features HDCP 2.3 compliance with HDCP 1.4 cross-conversion, hot-swap support for live system maintenance, and PoE (IEEE 802.3af) remote powering for connected TPX extenders at up to 25.4W per port. It is available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e for MX2M frame expansions and new system builds.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe MX2M-4TPX-IB installs into the MX2M modular matrix frame and adds four SDVoE-standard TPX inputs to the system’s switching fabric. On each port, the board de-embeds 8-channel LPCM and IEC 61937 audio formats to the MX2M’s Audio layer, allowing independent audio routing separate from the video crosspoint. Command injection capabilities for CEC, RS-232, and IR on each port enable control signal distribution to connected source-end transmitter devices without separate control wiring. The board is fully compatible with the Christie Terra projector and other SDVoE ecosystem devices.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_LightWare_MX2M-4TPX-IB_Input_Board.png?v=1757952570\" alt=\"Lightware MX2M-4TPX-IB SDVoE Input Board for MX2M Matrix\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_LightWare_MX2M-4TPX-IB_Input_Board_1.png?v=1757952573\" alt=\"Lightware MX2M-4TPX-IB Input Board Front\"\u003e\u003cp\u003eThe board supports Dolby Vision at low latency (less than 0.1 ms signal latency at 1080p60 via 0.08 ms video delay) and handles all standard VESA, CEA, and custom resolutions up to 600 MHz. Hot-swap capability allows the board to be inserted or removed from an operational MX2M frame without system downtime, reducing maintenance risk in broadcast and permanent installation environments. The MX2M-4TPX-IB is enclosed in 1.5 mm steel and cooled through the matrix frame airflow; no dedicated board cooling is required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x SDVoE TPX Inputs (10GBase-T)\u003c\/strong\u003e — Each RJ45 port accepts video, audio, RS-232, IR, and Ethernet from Lightware TPX transmitters and SDVoE-compliant third-party sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K60 4:4:4 at up to 100m\u003c\/strong\u003e — Supports 4096x2048@60Hz 4:4:4 and 3840x2160@60Hz 4:4:4 over CAT6A to 100 meters per port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.3 with 1.4 Cross-Conversion\u003c\/strong\u003e — Handles HDCP 2.3 and HDCP 1.4 sources with automatic cross-conversion for mixed protection environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Remote Powering at 25.4W per Port\u003c\/strong\u003e — Powers connected TPX transmitters over the CAT6A link; no separate power supply required at the transmitter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio De-embedding to MX2M Audio Layer\u003c\/strong\u003e — Extracts 8-channel LPCM and IEC 61937 formats for independent routing in the MX2M’s audio switching fabric.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess than 0.1 ms Signal Latency\u003c\/strong\u003e — 0.08 ms video delay at 1080p60; suitable for live production and monitoring systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDolby Vision Support\u003c\/strong\u003e — Low-latency Dolby Vision pass-through in the HDMI 2.0 signal stream.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot-Swap Support\u003c\/strong\u003e — Board can be inserted or removed from an operating MX2M frame without powering down the matrix.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCEC, RS-232, and IR Command Injection\u003c\/strong\u003e — Per-port control signal injection enables source device control from the matrix without separate control infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep Color Support\u003c\/strong\u003e — 24, 30, and 36-bit RGB and YCbCr 4:4:4 signal passthrough across all input ports.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroadcast studio and control center matrix input expansion\u003c\/li\u003e\n\u003cli\u003eConference room and boardroom multi-source SDVoE input aggregation\u003c\/li\u003e\n\u003cli\u003eAuditorium and large venue source input infrastructure\u003c\/li\u003e\n\u003cli\u003eGovernment space AV routing systems using MX2M\u003c\/li\u003e\n\u003cli\u003eTraining room matrix input for distributed source connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e91120050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Frame\u003c\/td\u003e\n\u003ctd\u003eMX2M modular matrix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Ports\u003c\/td\u003e\n\u003ctd\u003e4x RJ45 (10GBase-T AVX\/SDVoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.3 and HDCP 1.4 with cross-conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransferred Signals\u003c\/td\u003e\n\u003ctd\u003eVideo, Audio, RS-232, Infrared, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Space\u003c\/td\u003e\n\u003ctd\u003eRGB, YCbCr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution (8-bit)\u003c\/td\u003e\n\u003ctd\u003e4096x2048@60Hz 4:4:4; 3840x2160@60Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Delay\u003c\/td\u003e\n\u003ctd\u003e0.08 ms (1080p60)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Formats\u003c\/td\u003e\n\u003ctd\u003e8-ch PCM, DSD, Dolby Atmos, Dolby TrueHD, DTS-HD, AC-3, DTS, Dolby Digital Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3af; 25.4W per port output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHot-Swap\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003e1.5 mm steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e195.5 x 219.5 x 41.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eThrough MX2M frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUL, CE; IEC\/EN 55032; IEC\/EN 55035; RoHS EN 63000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware MX2M-4TPX-IB\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron XTP T UWP 302\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eModular matrix input board (4 ports)\u003c\/td\u003e\n\u003ctd\u003eStandalone HDBaseT receiver\u003c\/td\u003e\n\u003ctd\u003eStandalone HDBaseT wall-plate TX\u003c\/td\u003e\n\u003ctd\u003eStandalone HDBaseT receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorts per Unit\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport Protocol\u003c\/td\u003e\n\u003ctd\u003eAVX SDVoE (10GBase-T)\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003ctd\u003eXTP (HDBaseT)\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 (18 Gbps)\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Powering of Extenders\u003c\/td\u003e\n\u003ctd\u003eYes (25.4W per port)\u003c\/td\u003e\n\u003ctd\u003eNo (receiver)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio De-embedding\u003c\/td\u003e\n\u003ctd\u003eYes (to MX2M audio layer)\u003c\/td\u003e\n\u003ctd\u003eYes (analog out)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes (analog out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHot-Swap\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame Required\u003c\/td\u003e\n\u003ctd\u003eYes (MX2M)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhich MX2M frame sizes accept the MX2M-4TPX-IB?\u003c\/dt\u003e\n\u003cdd\u003eThe MX2M-4TPX-IB is compatible with all MX2M modular matrix frame sizes. Contact \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e for frame configuration and slot availability guidance.\u003c\/dd\u003e\n\u003cdt\u003eCan it work with non-Lightware SDVoE transmitters?\u003c\/dt\u003e\n\u003cdd\u003eYes. The board is compatible with SDVoE-compliant third-party transmitters in addition to Lightware TPX transmitters. Christie Terra projectors are specifically called out as a compatible device. Verify interoperability with specific third-party devices prior to deployment.\u003c\/dd\u003e\n\u003cdt\u003eWhat happens to audio when switching video on the MX2M?\u003c\/dt\u003e\n\u003cdd\u003eThe MX2M-4TPX-IB de-embeds audio to the MX2M Audio layer independently from the video crosspoint. Video and audio can be switched independently within the MX2M system, allowing, for example, audio follow or breakaway configurations.\u003c\/dd\u003e\n\u003cdt\u003eIs the board user-installable or does it require a technician?\u003c\/dt\u003e\n\u003cdd\u003eThe board supports hot-swap, meaning it can be inserted and removed from an operational MX2M frame. Physical installation is straightforward for a qualified AV technician. Software configuration is performed via the Lightware Device Controller application.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable category is required for the 100m distance?\u003c\/dt\u003e\n\u003cdd\u003eCAT6A or better is required for 10GBase-T operation at 100m. CAT5e or CAT6 may limit maximum cable length and should be verified against 10GBase-T specifications for the specific installation.\u003c\/dd\u003e\n\u003cdt\u003eDoes the board support HDMI 1.4 sources connected via TPX transmitters?\u003c\/dt\u003e\n\u003cdd\u003eYes. The board is HDMI 2.0, HDMI 1.x, and DVI compatible through the TPX transmitter connection, accommodating legacy source devices alongside 4K HDMI 2.0 sources.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":46742231843052,"sku":"91120050","price":6418.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_LightWare_MX2M-4TPX-IB_Input_Board.png?v=1757952570"},{"product_id":"lightware-psu-24vp3-120-spare-power-supply-with-iec-plug-for-taurus-ucx-product-series-universal-input-100-240v-ac-50-60hz-output-24v-dc-5a","title":"Lightware TPX-4x3-TX20-RX107 Bundle","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware TPX-4x3-TX20-RX107 Bundle pairs a TPX transmitter and receiver unit into a complete, pre-matched signal extension solution for professional AV installations. Designed for Lightware's TPX matrix and switcher ecosystem, this bundle eliminates compatibility guesswork and simplifies procurement for integrators deploying HDMI extension over structured cabling in corporate, education, and live event environments.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91340034.png?v=1757952587\" alt=\"Lightware TPX-4x3-TX20-RX107 Bundle\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe TX20 transmitter accepts HDMI input and encodes the signal for transport over a single Cat cable, while the RX107 receiver decodes and outputs HDMI at the destination display. Together they form a verified transmit\/receive pair that integrates directly with Lightware's TPX-4x3 matrix switcher. Both units support HDCP compliance, plug-and-play detection, and remote power delivery, making them a practical choice for fixed installations where signal reliability is non-negotiable.\u003c\/p\u003e\u003cp\u003eAvailable exclusively through \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, this bundle is stocked and ready to ship for commercial AV integrators.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePre-matched TX20 transmitter and RX107 receiver for guaranteed interoperability\u003c\/li\u003e\n\u003cli\u003eHDMI signal extension over Cat5e\/Cat6 structured cabling\u003c\/li\u003e\n\u003cli\u003eCompatible with Lightware TPX-4x3 matrix switcher\u003c\/li\u003e\n\u003cli\u003eHDCP-compliant signal handling\u003c\/li\u003e\n\u003cli\u003eRemote power delivery to receiver unit\u003c\/li\u003e\n\u003cli\u003ePlug-and-play EDID management\u003c\/li\u003e\n\u003cli\u003eCompact form factor for clean rack or surface installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCorporate conference rooms with distributed display systems\u003c\/li\u003e\n\u003cli\u003eUniversity lecture halls using Lightware TPX matrix switching\u003c\/li\u003e\n\u003cli\u003eHuddle spaces requiring reliable HDMI extension from a central rack\u003c\/li\u003e\n\u003cli\u003eLive event staging with long cable runs to confidence monitors\u003c\/li\u003e\n\u003cli\u003eGovernment and defense briefing rooms with structured AV infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTPX-4x3-TX20-RX107 Bundle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmitter Model\u003c\/td\u003e\n\u003ctd\u003eTX20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceiver Model\u003c\/td\u003e\n\u003ctd\u003eRX107\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Type\u003c\/td\u003e\n\u003ctd\u003eHDMI over Cat5e\/Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP Support\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Method\u003c\/td\u003e\n\u003ctd\u003eRemote power to RX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eLightware TPX-4x3 Matrix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eCompact wallplate\/surface mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eLightware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$313.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware TPX-4x3-TX20-RX107 Bundle\u003c\/th\u003e\n\u003cth\u003eCrestron HD-TX-101-C-E + HD-RX-101-C-E\u003c\/th\u003e\n\u003cth\u003eExtron DTP T HD 4K 230 + DTP R HD 4K 230\u003c\/th\u003e\n\u003cth\u003eAtlona AT-HDR-EX-70C-KIT\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEcosystem Lock-In\u003c\/td\u003e\n\u003ctd\u003eLightware TPX matrix — purpose-built pair\u003c\/td\u003e\n\u003ctd\u003eCrestron DM Lite — requires Crestron control\u003c\/td\u003e\n\u003ctd\u003eExtron DTP — requires Extron switcher\u003c\/td\u003e\n\u003ctd\u003eWorks with any HDMI source, brand-agnostic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Integration\u003c\/td\u003e\n\u003ctd\u003eNative TPX-4x3 integration, no config needed\u003c\/td\u003e\n\u003ctd\u003eNative DM Lite integration\u003c\/td\u003e\n\u003ctd\u003eNative DTP switcher integration\u003c\/td\u003e\n\u003ctd\u003eStandalone only, no native matrix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP Compliance\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes (HDR10 support)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power to RX\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes (PoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eCat5e\/Cat6\u003c\/td\u003e\n\u003ctd\u003eCat6a recommended\u003c\/td\u003e\n\u003ctd\u003eCat5e\/Cat6\u003c\/td\u003e\n\u003ctd\u003eCat5e\/Cat6\/Cat7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManagement\u003c\/td\u003e\n\u003ctd\u003eLightware LW3 protocol, web UI\u003c\/td\u003e\n\u003ctd\u003eCrestron Toolbox\u003c\/td\u003e\n\u003ctd\u003eExtron SIS commands\u003c\/td\u003e\n\u003ctd\u003eBasic web UI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcurement\u003c\/td\u003e\n\u003ctd\u003ePre-matched bundle — single SKU\u003c\/td\u003e\n\u003ctd\u003eSeparate SKUs, must match manually\u003c\/td\u003e\n\u003ctd\u003eSeparate SKUs, must match manually\u003c\/td\u003e\n\u003ctd\u003eKit available as single purchase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice Point\u003c\/td\u003e\n\u003ctd\u003e$313.50 — competitive for verified pair\u003c\/td\u003e\n\u003ctd\u003eHigher — Crestron premium pricing\u003c\/td\u003e\n\u003ctd\u003eHigher — Extron premium pricing\u003c\/td\u003e\n\u003ctd\u003eLower entry cost, fewer matrix features\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes this bundle require a Lightware TPX-4x3 switcher to function?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe TX20 and RX107 are designed for the TPX ecosystem and perform best when paired with the TPX-4x3 matrix. Standalone point-to-point operation may work, but full feature support and management require the TPX switcher.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat cable category is required between TX and RX?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCat5e or Cat6 is the standard recommendation. Cat6 is preferred for longer runs or environments with high electromagnetic interference.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs HDCP 2.2 supported for 4K content?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eVerify your specific content protection requirements against the TX20 and RX107 datasheets. Contact Creation Networks for a technical pre-sales consultation at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I power the RX107 remotely from the TX20?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The TX20 provides remote power to the RX107 over the Cat cable, eliminating the need for a local power supply at the display end.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the maximum extension distance?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eMaximum distance depends on cable quality and signal resolution. Refer to the Lightware TPX-4x3 documentation for distance tables by resolution and cable category.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase this bundle?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe TPX-4x3-TX20-RX107 Bundle is available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller stocking professional AV infrastructure products.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":46742233022700,"sku":"91340034","price":313.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91340034.png?v=1757952587"},{"product_id":"lightware-tpx-4x3-tx20-rx107-bundle-lightware-taurus-tpx-transmitter-and-receiver-bundle-it-contains-1-pc-ucx-4x3-tpx-tx20-and-1-pc-hdmi-ucx-tpx-rx107","title":"LightWare TPX-4x3-TX20-RX107 bundle Lightware Taurus TPX transmitter and receiver bundle. It contains 1 pc UCX-4x3-TPX-TX20 and 1 pc HDMI-UCX-TPX-RX107.","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware TPX-4x3-TX20-RX107 is a complete Taurus UCX transmitter and receiver bundle combining the UCX-4x3-TPX-TX20 multi-input matrix transmitter with the HDMI-UCX-TPX-RX107 SDVoE receiver in a single purchase. The bundle delivers USB-C and HDMI 2.0 signal extension over a single CAT6A cable to 100 meters, supporting 4K UHD at 60Hz 4:4:4 and 5K (5120x2160) resolution over HDMI 2.0. It is purpose-built for enterprise conference rooms, Microsoft Teams and Barco-based collaboration spaces, and huddle rooms requiring multi-source switching, USB peripheral sharing, and USB-C bring-your-own-device connectivity from a single compact transmitter. The bundle is available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e and is the standard deployment pairing for Lightware Taurus UCX installations.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe UCX-4x3-TPX-TX20 transmitter accepts two HDMI 2.0 inputs and one USB-C input (supporting DisplayPort 1.2a, up to 4K60 4:4:4 at 600 MHz pixel clock), routes any source to its TPX output and local HDMI monitor, and carries video, audio, USB 2.0, RS-232, OCS, and Ethernet to the HDMI-UCX-TPX-RX107 receiver over a single RJ45 CAT6A cable at 10GBase-T. USB host switching supports up to 8 devices across both units — four at the transmitter and four at the receiver — enabling seamless peripheral handoff between in-room and laptop-connected computers. The transmitter provides USB-C charging at up to 100W and PoE+ remote power delivery to the receiver (up to 25.4W), eliminating the need for a separate power connection at the display end.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91350015.png?v=1757952662\" alt=\"Lightware TPX-4x3-TX20-RX107 Taurus UCX Bundle\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91350015_1.png?v=1757952663\" alt=\"Lightware UCX-4x3-TPX-TX20 and HDMI-UCX-TPX-RX107 Transmitter Receiver Bundle\"\u003e\u003cp\u003eThe HDMI-UCX-TPX-RX107 receiver outputs one HDMI 2.0 signal (up to 4K60 4:4:4) to the display, provides two Ethernet ports for room device LAN connectivity, one RS-232 port for display control, and one balanced analog audio output (2-ch PCM). The receiver is passively cooled and can be powered by the transmitter’s PoE output or by an included 12V DC adapter. Both units carry NIST FIPS 140-3 certified cryptography as an optional variant. Available with FIPS certification (SKU: 91360034 variant). Syslog remote logging is supported on both units via TCP\/UDP\/TLS for integration with SIEM and network monitoring tools.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Input with 100W Charging\u003c\/strong\u003e — Full USB-C connectivity on the transmitter including DP 1.2a video, data, and up to 100W power delivery to the connected laptop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K60 4:4:4 and 5K Support\u003c\/strong\u003e — Handles up to 4096x2160@60Hz 4:4:4 on HDMI and USB-C inputs; 5120x2160 at 30Hz 4:4:4 or 60Hz 4:2:0 via HDMI 2.0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle CAT6A Extension to 100m\u003c\/strong\u003e — Video, audio, USB, RS-232, OCS, and Ethernet all travel over one 10GBase-T cable; no fiber required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependent USB Host Switching\u003c\/strong\u003e — Supports up to 8 USB 2.0 devices (4 at TX, 4 at RX) with independent host assignment for room and laptop computers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE+ Remote Powering\u003c\/strong\u003e — Transmitter powers the receiver over the CAT6A link (up to 25.4W) eliminating a wall outlet at the display end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero Frame Video Latency\u003c\/strong\u003e — Signal passes through the TPX link with no added video frame delay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.3 Compliant\u003c\/strong\u003e — End-to-end content protection through transmitter and receiver chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePixel Accurate Reclocking\u003c\/strong\u003e — Eliminates jitter at source inputs and across the transmission chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO Port on Transmitter\u003c\/strong\u003e — 8-pole Phoenix with 6 configurable I\/O pins for room sensor and occupancy control integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoom Device Control via Ethernet and RS-232\u003c\/strong\u003e — Two Ethernet and one RS-232 port on each unit for display, codec, and room controller connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSyslog Remote Logging\u003c\/strong\u003e — Supports RFC3164 and RFC5424 over TCP, UDP, and TLS for SIEM and network monitoring integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional FIPS 140-3 Certified Cryptography\u003c\/strong\u003e — Available in a secure variant with NIST FIPS 140-3 certified LWR CryptoCore for government and high-security environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room USB-C bring-your-own-device (BYOD) systems\u003c\/li\u003e\n\u003cli\u003eMicrosoft Teams Rooms and Barco ClickShare deployments\u003c\/li\u003e\n\u003cli\u003eBoardroom dual-display presentation switching\u003c\/li\u003e\n\u003cli\u003eTraining room multi-source routing\u003c\/li\u003e\n\u003cli\u003eHuddle space AV-over-CAT infrastructure\u003c\/li\u003e\n\u003cli\u003eGovernment space with FIPS-certified secure AV extension\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eUCX-4x3-TPX-TX20 (Transmitter)\u003c\/th\u003e\n\u003cth\u003eHDMI-UCX-TPX-RX107 (Receiver)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Inputs\u003c\/td\u003e\n\u003ctd\u003e2x HDMI 2.0 (18 Gbps); 1x USB-C (DP 1.2a)\u003c\/td\u003e\n\u003ctd\u003e1x TPX (10GBase-T RJ45)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Outputs\u003c\/td\u003e\n\u003ctd\u003e1x HDMI 2.0; 1x TPX (10GBase-T RJ45)\u003c\/td\u003e\n\u003ctd\u003e1x HDMI 2.0 (up to 4K60 4:4:4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4096x2160@60Hz 4:4:4; 5120x2160@30Hz 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4096x2160@60Hz 4:4:4; 5120x2160@30Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.3, 1.4\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 host (x3 A-type + 1x C-type); 1x B-type device\u003c\/td\u003e\n\u003ctd\u003eReceives USB 2.0 from TX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPX Link Speed\u003c\/td\u003e\n\u003ctd\u003e10GBase-T (AVXT SDVoE)\u003c\/td\u003e\n\u003ctd\u003e10GBase-T (AVXT SDVoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax TPX Cable Length\u003c\/td\u003e\n\u003ctd\u003e100 m (CAT6A)\u003c\/td\u003e\n\u003ctd\u003e100 m (CAT6A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e1x RJ45 (10\/100\/1000 Base-T)\u003c\/td\u003e\n\u003ctd\u003e2x RJ45 (1GBase-T)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232\u003c\/td\u003e\n\u003ctd\u003e1x 3-pole Phoenix (9600–115200 baud)\u003c\/td\u003e\n\u003ctd\u003e1x 3-pole Phoenix (default 9600 baud)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Output\u003c\/td\u003e\n\u003ctd\u003e1x 5-pole Phoenix (2-ch PCM, 48kHz, balanced)\u003c\/td\u003e\n\u003ctd\u003e1x 5-pole Phoenix (2-ch PCM, 48kHz, balanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO\u003c\/td\u003e\n\u003ctd\u003e8-pole Phoenix (6x configurable I\/O, 1x 5V out, 1x GND)\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003ePSE IEEE 802.3af (powers RX up to 25.4W)\u003c\/td\u003e\n\u003ctd\u003ePD IEEE 802.3af (powered by TX or 12V DC adapter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-C Charging\u003c\/td\u003e\n\u003ctd\u003eUp to 100W\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFan\u003c\/td\u003e\n\u003ctd\u003ePassive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (mm)\u003c\/td\u003e\n\u003ctd\u003e271 x 140.3 x 26\u003c\/td\u003e\n\u003ctd\u003e151.8 x 104.9 x 26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eExternal 220W PSU (included)\u003c\/td\u003e\n\u003ctd\u003ePoE from TX or 12V DC adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eCE, UKCA\u003c\/td\u003e\n\u003ctd\u003eCE, UKCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware TPX-4x3-TX20-RX107\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron XTP T UWP 302\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBundle Type\u003c\/td\u003e\n\u003ctd\u003eComplete TX+RX bundle\u003c\/td\u003e\n\u003ctd\u003eReceiver only\u003c\/td\u003e\n\u003ctd\u003eTransmitter only (wall plate)\u003c\/td\u003e\n\u003ctd\u003eReceiver only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-C Input\u003c\/td\u003e\n\u003ctd\u003eYes (DP 1.2a, 100W charging)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB 2.0 Extension\u003c\/td\u003e\n\u003ctd\u003eYes (8 devices, bidirectional)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 + 5K\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Medium\u003c\/td\u003e\n\u003ctd\u003eSingle CAT6A (10GBase-T)\u003c\/td\u003e\n\u003ctd\u003eCAT (HDBaseT)\u003c\/td\u003e\n\u003ctd\u003eCAT (XTP)\u003c\/td\u003e\n\u003ctd\u003eCAT (HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100 m\u003c\/td\u003e\n\u003ctd\u003e90 m\u003c\/td\u003e\n\u003ctd\u003e100 m\u003c\/td\u003e\n\u003ctd\u003e100 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Remote Power\u003c\/td\u003e\n\u003ctd\u003eYes (TX powers RX)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFIPS Security Option\u003c\/td\u003e\n\u003ctd\u003eYes (FIPS 140-3 variant)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat cables are included in the bundle?\u003c\/dt\u003e\n\u003cdd\u003eThe bundle includes power supplies and Phoenix connector plugs for both units. A CAT6A cable between transmitter and receiver is not included and must be ordered separately. A USB-C cable (USB 3.1 Gen2) is supplied with the transmitter.\u003c\/dd\u003e\n\u003cdt\u003eCan the receiver operate without a separate power supply?\u003c\/dt\u003e\n\u003cdd\u003eYes. The UCX-4x3-TPX-TX20 transmitter provides PoE+ power to the HDMI-UCX-TPX-RX107 receiver over the CAT6A link (up to 25.4W). A 12V DC adapter is also supplied with the receiver as an alternative power source.\u003c\/dd\u003e\n\u003cdt\u003eDoes the bundle support Teams Rooms or Zoom Rooms?\u003c\/dt\u003e\n\u003cdd\u003eYes. The bundle supports USB-C and HDMI source switching alongside USB 2.0 peripheral sharing — the core requirements for Teams Rooms, Zoom Rooms, and Barco ClickShare configurations. Specific integration details depend on the room controller and collaboration platform configuration.\u003c\/dd\u003e\n\u003cdt\u003eIs the 5K resolution support practical for current displays?\u003c\/dt\u003e\n\u003cdd\u003e5K (5120x2160) support is available over HDMI 2.0 at 30Hz 4:4:4 or 60Hz 4:2:0. It targets ultrawide 21:9 displays and advanced visualization environments. Standard 4K60 4:4:4 remains the primary deployment resolution.\u003c\/dd\u003e\n\u003cdt\u003eWhat is the maximum USB 2.0 speed over the TPX link?\u003c\/dt\u003e\n\u003cdd\u003eThe TPX link carries USB 2.0 (480 Mbps) transparently and in composite mode. USB 3.0+ speeds are not extended over the CAT6A link.\u003c\/dd\u003e\n\u003cdt\u003eCan the transmitter switch between its three video inputs?\u003c\/dt\u003e\n\u003cdd\u003eYes. The UCX-4x3-TPX-TX20 is a 4x3 matrix switcher — it routes any of its inputs to its HDMI monitor output and TPX output independently, including any-input to any-output combinations.\u003c\/dd\u003e\n\u003cdt\u003eIs a FIPS-certified version available to order?\u003c\/dt\u003e\n\u003cdd\u003eYes. Contact \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e to order the FIPS 140-3 certified variant (LWR CryptoCore, SKU 91360034) for government and secure facility deployments.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":46742238527724,"sku":"91350015","price":6996.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/CN_91350015.png?v=1757952662"},{"product_id":"lightware-tpx-2x1-tx20-3x3-rx20-bundle-lightware-taurus-tpx-transmitter-and-receiver-bundle-it-contains-1-pc-ucx-2x1-tpx-tx20-and-1-pc-ucx-3x3-tpx-rx20","title":"LightWare TPX-2x1-TX20-3x3-RX20 bundle Lightware Taurus TPX transmitter and receiver bundle.","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware TPX-2x1-TX20-3x3-RX20 Bundle packages the Taurus TPX transmitter and receiver units together, delivering a complete point-to-point 4K UHD video, audio, Ethernet, and control signal distribution solution for meeting rooms, classrooms, and corporate collaborative spaces. The Taurus TPX platform is Lightware's HDBaseT-based extension system for fixed installations, providing reliable 4K signal transport with HDCP 2.2 compliance and PoE support in a single purchasing configuration. Buying as a bundle simplifies procurement for integrators deploying matched transmitter-receiver pairs across multi-room rollouts.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe TPX-2x1-TX20 transmitter accepts two video inputs and passes video, audio, RS-232, IR, and Ethernet to the 3x3-RX20 receiver over HDBaseT infrastructure. The receiver delivers the signal to the local display and provides bidirectional RS-232 and IR for control of remote devices. PoE support on the transmitter simplifies power management by allowing the receiver to power the transmitter over the same HDBaseT cable, removing the need for a local power outlet at the transmitter. The bundle is intended for corporate conference rooms, classrooms, and collaborative spaces where AV integration must be straightforward to install, manage, and replicate across multiple rooms. 4K UHD at 60Hz RGB 4:4:4 and HDCP 2.2 compliance ensure the system handles both current and forward-looking AV source requirements. The transmitter includes a 2-input switcher for local source selection at the presentation position.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/cN_91360016.png?v=1757952664\" alt=\"Lightware TPX-2x1-TX20-3x3-RX20 Bundle\"\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete TX+RX bundle\u003c\/strong\u003e — Matched Taurus TPX transmitter and receiver in a single purchase, simplifying procurement for multi-room deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-input transmitter switcher\u003c\/strong\u003e — Two video inputs on the TX for local source selection at the presentation position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K UHD@60Hz RGB 4:4:4 support\u003c\/strong\u003e — Full 4K signal transport at the highest color fidelity without subsampling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.2 compliance\u003c\/strong\u003e — Handles copy-protected content from current-generation sources and displays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE support\u003c\/strong\u003e — Receiver powers the transmitter over the HDBaseT cable, reducing local power requirements at the source position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo, audio, RS-232, IR, Ethernet\u003c\/strong\u003e — All AV and control signals travel over a single HDBaseT cable between TX and RX.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-distance signal extension\u003c\/strong\u003e — HDBaseT transmission over standard CATx cabling for conference rooms, classrooms, and collaborative spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-directional RS-232 and IR\u003c\/strong\u003e — Control of remote displays and devices from the transmitter or control system end.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBundle Contents\u003c\/td\u003e\n\u003ctd\u003e1x TPX-2x1-TX20 transmitter, 1x TPX-3x3-RX20 receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K UHD@60Hz RGB 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Transport\u003c\/td\u003e\n\u003ctd\u003eVideo, Audio, RS-232, IR, Ethernet over HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2 compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmitter Inputs\u003c\/td\u003e\n\u003ctd\u003e2x video inputs (switchable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower (TX)\u003c\/td\u003e\n\u003ctd\u003ePoE powered from RX over HDBaseT cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eBi-directional RS-232 and IR pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eFixed installation, corporate AV, meeting rooms, classrooms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware TPX-2x1-TX20-3x3-RX20 Bundle\u003c\/th\u003e\n\u003cth\u003eCrestron DM-MD32X32\u003c\/th\u003e\n\u003cth\u003eExtron XTP T UWP 302\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003ePoint-to-point HDBaseT TX+RX bundle\u003c\/td\u003e\n\u003ctd\u003eLarge-scale matrix switcher\u003c\/td\u003e\n\u003ctd\u003ePoint-to-point XTP extender (TX only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBundle format\u003c\/td\u003e\n\u003ctd\u003eYes, TX+RX together\u003c\/td\u003e\n\u003ctd\u003eN\/A (matrix system)\u003c\/td\u003e\n\u003ctd\u003eTX only; RX sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4K UHD@60Hz 4:4:4\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes (with 4K cards)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE powering\u003c\/td\u003e\n\u003ctd\u003eYes, RX powers TX\u003c\/td\u003e\n\u003ctd\u003eVaries by DM card\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2-input TX switcher\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eNo (single input)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 + IR pass-through\u003c\/td\u003e\n\u003ctd\u003eYes, bi-directional\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTarget installation type\u003c\/td\u003e\n\u003ctd\u003eMeeting rooms, classrooms, fixed corporate AV\u003c\/td\u003e\n\u003ctd\u003eLarge multi-room matrix\u003c\/td\u003e\n\u003ctd\u003eSingle-room point-to-point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat is included in the TPX-2x1-TX20-3x3-RX20 bundle?\u003c\/dt\u003e\n\u003cdd\u003eThe bundle includes one TPX-2x1-TX20 transmitter and one TPX-3x3-RX20 receiver. All necessary signal extension for a single room installation is covered by these two units.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable type is used between transmitter and receiver?\u003c\/dt\u003e\n\u003cdd\u003eThe TPX system uses standard CAT5e, CAT6, or CAT6A cabling for HDBaseT signal transmission. Refer to the Lightware TPX documentation for specific distance limits by cable type and resolution.\u003c\/dd\u003e\n\u003cdt\u003eDoes the transmitter require its own power supply?\u003c\/dt\u003e\n\u003cdd\u003eThe transmitter is PoE powered from the receiver over the HDBaseT cable, so a local AC outlet at the transmitter position is typically not required. Verify PoE availability in your specific installation.\u003c\/dd\u003e\n\u003cdt\u003eCan this system be used with a control system such as Crestron or AMX?\u003c\/dt\u003e\n\u003cdd\u003eYes. The RS-232 and IR pass-through on both units are compatible with standard third-party control systems for room automation.\u003c\/dd\u003e\n\u003cdt\u003eDoes the 2-input switcher on the transmitter support auto-switching?\u003c\/dt\u003e\n\u003cdd\u003eConsult the Lightware TPX product documentation or contact Creation Networks for specific auto-switching behavior and configuration options.\u003c\/dd\u003e\n\u003cdt\u003eIs HDCP 2.2 supported for streaming sources and Blu-ray?\u003c\/dt\u003e\n\u003cdd\u003eYes. HDCP 2.2 compliance covers current-generation streaming devices and 4K Blu-ray players that require HDCP 2.2.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the TPX-2x1-TX20-3x3-RX20 bundle?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware commercial AV reseller.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":46742238593260,"sku":"91360016","price":7423.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/cN_91360016.png?v=1757952664"}],"url":"https:\/\/creationnetworks.net\/collections\/lightware-tpx-sdvoe.oembed","provider":"Creation Networks","version":"1.0","type":"link"}