{"title":"Lightware TPS HDBaseT Extenders","description":"\u003cp\u003eLightware TPS extenders carry HDMI, DisplayPort, USB, Ethernet, RS-232 and IR over a single CATx cable using HDBaseT, with PoE so the remote end needs no local power supply.\u003c\/p\u003e\n\n\u003ch2\u003eWhere TPS fits\u003c\/h2\u003e\u003cp\u003eTPS is the default choice for in-building runs. One shielded twisted pair cable replaces a bundle, and PoE means the receiver behind a display needs no outlet — which is usually what makes a clean install possible behind a wall-mounted screen or inside a lectern.\u003c\/p\u003e\n\u003cp\u003eCable quality decides reliability more than the extender does. HDBaseT over marginal cable produces intermittent dropouts that look like equipment faults and are not. Specify shielded CATx and terminate it properly, and keep the run inside the rated distance for the resolution in use — 4K reduces reach compared with 1080p.\u003c\/p\u003e\n\n\u003ch2\u003eFloorbox and furniture versions\u003c\/h2\u003e\u003cp\u003eFP floorbox models drop the transmitter into a floor or table box, which suits conference tables and lecture theatre positions where the source connects at the seat rather than at the rack.\u003c\/p\u003e\n\n\u003cp\u003eCreation Networks calculates cable runs, specifies transport and commissions the result. Call 888-230-3661 or email sales@creationnetworks.net.\u003c\/p\u003e","products":[{"product_id":"lightware-hdmi-tps-tx86-tps-extender-for-single-catx-cable-91540086","title":"Lightware HDMI-TPS-TX86 TPS extender for single CATx cable - 91540086","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPS-TX86 is a HDBaseT TPS transmitter that converts HDMI input from a source device into an HDBaseT signal for transport over a single CATx cable to a compatible receiver. It is the source-end unit in the HDMI-TPS-TX86\/RX86 pair. Unlike the PoE-equipped TX87, the TX86 does not supply power to the receiver over the cable — both ends require their own power supplies. This makes the TX86\/RX86 pair suited to installations where local power is available at both locations and overall system cost is the deciding factor.\u003c\/p\u003e\u003cp\u003eAvailable at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx86-tps-extender-for-single-catx-cable-91540086-creation-networks-91846.jpg?v=1757925272\" alt=\"Lightware HDMI-TPS-TX86 TPS Transmitter\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe TX86 accepts HDMI 2.0 input from a PC, media player, or AV matrix and transmits the signal as HDBaseT over Cat5e, Cat6, or Cat7 structured cabling. Video up to 4K\/60Hz is supported alongside multi-channel audio and control signals including RS-232, IR, and 100Base-T Ethernet. EDID management allows a stored EDID profile to be presented to the source, preventing resolution mismatches when the display is not directly connected. The compact chassis is designed for installation at or near the AV source equipment, typically in a rack, behind a wall plate, or on a desk surface.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHDMI 2.0 input with HDCP 2.2 compliance\u003c\/li\u003e\n\u003cli\u003e4K\/60Hz HDBaseT transmission over Cat5e\/6\/7\u003c\/li\u003e\n\u003cli\u003eExtension up to 100m over Cat6\u003c\/li\u003e\n\u003cli\u003eBidirectional RS-232 and IR pass-through\u003c\/li\u003e\n\u003cli\u003e100Base-T Ethernet pass-through\u003c\/li\u003e\n\u003cli\u003eEDID management with internal EDID storage\u003c\/li\u003e\n\u003cli\u003eNo PoE output — both ends require local power\u003c\/li\u003e\n\u003cli\u003eStatus LEDs for link and HDCP state\u003c\/li\u003e\n\u003cli\u003eDesigned as matched pair with HDMI-TPS-RX86\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCorporate boardrooms and training suites distributing 4K from a local PC or Blu-ray player to a remote screen\u003c\/li\u003e\n\u003cli\u003eHouse-of-worship AV systems routing HDMI from production equipment to projection screens\u003c\/li\u003e\n\u003cli\u003ePermanent classroom or lecture hall installations where both AV rack and display wall have mains power\u003c\/li\u003e\n\u003cli\u003eDigital signage systems with media players at accessible, powered locations at both source and display\u003c\/li\u003e\n\u003cli\u003eMulti-screen retail video walls fed from a single HDMI source per screen via structured cabling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHDMI-TPS-TX86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540086\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Input\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (Type A connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Output\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (TPS) via RJ-45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 4K\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.2 and 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Extension Distance\u003c\/td\u003e\n\u003ctd\u003e100m (Cat5e\/6), 130m (Cat7) at 1080p\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Support\u003c\/td\u003e\n\u003ctd\u003eLPCM 7.1, Dolby Atmos, DTS:X (pass-through)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Pass-through\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet (100Base-T)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003eNone — local PSU required at each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eExternal 12V DC adapter (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e159 x 99 x 26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 320g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPS-TX86\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Version\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0\u003c\/td\u003e\n\u003ctd\u003eHDMI 1.4\u003c\/td\u003e\n\u003ctd\u003eHDMI 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4K\/60Hz Support\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo (4K\/30Hz only)\u003c\/td\u003e\n\u003ctd\u003eNo (4K\/30Hz only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE from Transmitter\u003c\/td\u003e\n\u003ctd\u003eNo — RX needs local PSU\u003c\/td\u003e\n\u003ctd\u003eYes — TX supplies PoE to RX\u003c\/td\u003e\n\u003ctd\u003eNo — RX needs local PSU\u003c\/td\u003e\n\u003ctd\u003eNo — RX needs local PSU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance (Cat6)\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003ctd\u003e90m\u003c\/td\u003e\n\u003ctd\u003e70m\u003c\/td\u003e\n\u003ctd\u003e70m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes (bidirectional)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes (100Base-T)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice Position\u003c\/td\u003e\n\u003ctd\u003e$676 — competitive HDMI 2.0 HDBaseT TX\u003c\/td\u003e\n\u003ctd\u003e~$850+ — full-featured but premium cost\u003c\/td\u003e\n\u003ctd\u003e~$360 — lower spec HDMI 1.4\u003c\/td\u003e\n\u003ctd\u003e~$350 — lower spec HDMI 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat is the difference between the TX86 and TX87?\u003c\/dt\u003e\n\u003cdd\u003eThe TX87 includes an integrated IEEE 802.3af PoE power sourcing function, which powers the matched RX87 receiver over the HDBaseT cable — eliminating the need for a local PSU at the display. The TX86 does not supply PoE, so both the TX86 and RX86 require their own power adapters. The TX86\/RX86 pair costs slightly less and is appropriate when power is available at both installation points.\u003c\/dd\u003e\n\u003cdt\u003eDoes the TX86 include a power supply?\u003c\/dt\u003e\n\u003cdd\u003eYes. A 12V DC external power adapter is included. The RX86 receiver also requires its own separate power supply (also included with the RX86).\u003c\/dd\u003e\n\u003cdt\u003eWhat EDID modes does the TX86 support?\u003c\/dt\u003e\n\u003cdd\u003eThe TX86 supports EDID pass-through from the connected display, as well as a stored EDID mode where a fixed EDID profile is presented to the source regardless of the display's state. Stored EDID mode prevents source resolution changes during signal interruptions.\u003c\/dd\u003e\n\u003cdt\u003eCan the TX86 work with a matrix switcher or AV processor?\u003c\/dt\u003e\n\u003cdd\u003eYes. The TX86 accepts any HDMI 2.0 signal from a matrix output, switcher, or processor. It is commonly deployed as the output extender from a central HDMI matrix to a remote display location.\u003c\/dd\u003e\n\u003cdt\u003eWhat happens if Cat5e cable is used instead of Cat6?\u003c\/dt\u003e\n\u003cdd\u003eCat5e is supported and will work reliably at distances up to approximately 70 meters for 4K content. For runs approaching 100 meters or in environments with significant electromagnetic interference, Cat6 or Cat7 shielded cable is recommended.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973499355372,"sku":"91540086","price":676.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx86-tps-extender-for-single-catx-cable-91540086-creation-networks-91846.jpg?v=1757925272"},{"product_id":"lightware-hdmi-tps-rx86-tps-extender-for-single-catx-cable-91540087","title":"Lightware HDMI-TPS-RX86 TPS extender for single CATx cable - 91540087","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPS-RX86 is a HDBaseT TPS receiver that extends HDMI signals over a single CATx cable from a compatible transmitter. It is the receive-side unit in the HDMI-TPS-TX86\/RX86 pair, converting an HDBaseT input back to HDMI output for connection to a display. Unlike the PoE-equipped RX87, the RX86 requires a local power supply, making it the cost-effective choice for installations where a local power outlet is available at the display location.\u003c\/p\u003e\u003cp\u003eAvailable at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx86-tps-extender-for-single-catx-cable-91540087-creation-networks-12988.jpg?v=1757925273\" alt=\"Lightware HDMI-TPS-RX86 TPS Receiver\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe HDMI-TPS-RX86 receives an HDBaseT signal from the paired TX86 transmitter and outputs HDMI to a local monitor or projector. It supports HDMI 2.0 with HDCP 2.2, enabling 4K\/60Hz transport. RS-232 and IR control signals travel alongside the video on the same CATx run. The unit does not include PoE, so a separate 12V DC power supply is required at the receiver end. This makes the RX86\/TX86 pair a practical option when both ends of the installation have accessible power and a lower overall system cost is the priority. EDID management is supported, and status LEDs indicate link and HDCP state.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHDMI 2.0 output with HDCP 2.2 compliance\u003c\/li\u003e\n\u003cli\u003e4K\/60Hz support over HDBaseT link\u003c\/li\u003e\n\u003cli\u003eExtension up to 100m over Cat5e\/6\/7\u003c\/li\u003e\n\u003cli\u003eRS-232 and IR control pass-through\u003c\/li\u003e\n\u003cli\u003e100Base-T Ethernet pass-through\u003c\/li\u003e\n\u003cli\u003eEDID management with stored EDID support\u003c\/li\u003e\n\u003cli\u003eLocal power supply required (no PoE) — lower unit cost than RX87\u003c\/li\u003e\n\u003cli\u003eCompact chassis with status LED indicators\u003c\/li\u003e\n\u003cli\u003eCompatible with HDMI-TPS-TX86 transmitter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms and training suites where power is accessible at the display wall plate\u003c\/li\u003e\n\u003cli\u003eRetail or hospitality digital signage with displays above powered wall outlets\u003c\/li\u003e\n\u003cli\u003eEducational environments where cost-per-drop is a priority and local power is available\u003c\/li\u003e\n\u003cli\u003eFixed installation AV systems where both source and display racks have dedicated power circuits\u003c\/li\u003e\n\u003cli\u003eUpgrading legacy SDI or analog runs to HDMI over structured cabling infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHDMI-TPS-RX86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540087\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Input\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (TPS) via RJ-45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Output\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (Type A connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 4K\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.2 and 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Extension Distance\u003c\/td\u003e\n\u003ctd\u003e100m (Cat5e\/6), 130m (Cat7) at 1080p\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Support\u003c\/td\u003e\n\u003ctd\u003eLPCM 7.1, Dolby Atmos, DTS:X (pass-through)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Pass-through\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet (100Base-T)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003eNone — local 12V DC power required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eExternal 12V DC adapter (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e159 x 99 x 26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 305g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPS-RX86\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Version\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0\u003c\/td\u003e\n\u003ctd\u003eHDMI 1.4\u003c\/td\u003e\n\u003ctd\u003eHDMI 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4K\/60Hz Support\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo (4K\/30Hz only)\u003c\/td\u003e\n\u003ctd\u003eNo (4K\/30Hz only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE at Receiver\u003c\/td\u003e\n\u003ctd\u003eNo — local PSU required\u003c\/td\u003e\n\u003ctd\u003eYes (PoE PD)\u003c\/td\u003e\n\u003ctd\u003eNo — local PSU required\u003c\/td\u003e\n\u003ctd\u003eNo — local PSU required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance (Cat6)\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003ctd\u003e90m\u003c\/td\u003e\n\u003ctd\u003e70m\u003c\/td\u003e\n\u003ctd\u003e70m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes (bidirectional)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes (100Base-T)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice Position\u003c\/td\u003e\n\u003ctd\u003e$676 — cost-effective HDMI 2.0 HDBaseT\u003c\/td\u003e\n\u003ctd\u003e~$850+ — PoE included, higher cost\u003c\/td\u003e\n\u003ctd\u003e~$400 — HDMI 1.4 limits future-proofing\u003c\/td\u003e\n\u003ctd\u003e~$380 — HDMI 1.4 limits future-proofing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat is the difference between the RX86 and RX87?\u003c\/dt\u003e\n\u003cdd\u003eThe primary difference is PoE support. The RX87 can be powered over the HDBaseT cable from the TX87 transmitter, eliminating the need for a local power outlet at the receiver. The RX86 requires a separate 12V DC power supply at the receiver end. Both units otherwise share the same video and control feature set at a slightly lower price point for the RX86.\u003c\/dd\u003e\n\u003cdt\u003eWhat transmitter is the RX86 compatible with?\u003c\/dt\u003e\n\u003cdd\u003eThe HDMI-TPS-RX86 is designed and tested as a matched pair with the HDMI-TPS-TX86 transmitter. Cross-compatibility with the TX87 or third-party HDBaseT transmitters is not guaranteed by Lightware.\u003c\/dd\u003e\n\u003cdt\u003eDoes the RX86 include a power supply?\u003c\/dt\u003e\n\u003cdd\u003eYes. A 12V DC external power adapter is included in the box. The unit must be powered locally — it does not accept PoE from the HDBaseT link.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable type is recommended?\u003c\/dt\u003e\n\u003cdd\u003eCat6 or Cat7 is recommended for reliable 4K\/60Hz performance at distances over 50 meters. Cat5e may be used at shorter runs. Avoid unshielded cable runs in areas with high electromagnetic interference.\u003c\/dd\u003e\n\u003cdt\u003eCan I use the RX86 without RS-232 or IR control?\u003c\/dt\u003e\n\u003cdd\u003eYes. The control pass-through features are optional. The unit will transport HDMI video and audio regardless of whether RS-232 or IR devices are connected. Unused control ports do not affect video operation.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973502238956,"sku":"91540087","price":676.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx86-tps-extender-for-single-catx-cable-91540087-creation-networks-12988.jpg?v=1757925273"},{"product_id":"lightware-hdmi-tps-tx96-tps-extender-for-single-catx-cable-91540067","title":"Lightware HDMI-TPS-TX96 TPS extender for single CATx cable - 91540067","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLightware HDMI-TPS-TX96\u003c\/strong\u003e (part number 91540067) is a professional HDBaseT transmitter that extends HDMI signals, RS-232, and IR control over a single Cat5e\/6\/7 cable. It is the transmitter half of the TPS-TX96\/RX96 extender pair, designed for fixed AV installations where long cable runs between the equipment rack and display are required. Unlike the TX97 model, the TX96 does not include PoE output, making it the appropriate choice when the receiver will have its own local power supply.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx96-tps-extender-for-single-catx-cable-91540067-creation-networks-15150.png?v=1757925274\" alt=\"Lightware HDMI-TPS-TX96 transmitter front\" style=\"max-width:100%;margin-bottom:12px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx96-tps-extender-for-single-catx-cable-91540067-creation-networks-41609.png?v=1757925282\" alt=\"Lightware HDMI-TPS-TX96 rear panel\" style=\"max-width:100%;margin-bottom:12px;\"\u003e\n\u003cp\u003eThe TX96 transmits HDMI video (4K\/30Hz or 1080p\/60Hz at full distance), RS-232, and IR over standard CATx infrastructure using HDBaseT technology. HDCP 2.2 compliance ensures protected content is handled correctly throughout the extension path. EDID management is configurable via Lightware Device Controller, allowing integrators to assign and emulate EDID profiles independent of the downstream display state.\u003c\/p\u003e\n\u003cp\u003eThe TX96 works within Lightware's TPS ecosystem and integrates with Lightware MX matrix switchers and DA distribution amplifiers for scalable signal distribution architectures. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e. Pair with the \u003cstrong\u003eHDMI-TPS-RX96\u003c\/strong\u003e receiver for a complete extender solution.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHDBaseT transmission over single Cat5e\/6\/7 cable up to 100 meters\u003c\/li\u003e\n  \u003cli\u003eHDMI input supporting 4K\/60Hz source signals\u003c\/li\u003e\n  \u003cli\u003eHDCP 2.2 compliant\u003c\/li\u003e\n  \u003cli\u003eRS-232 and IR pass-through over CATx\u003c\/li\u003e\n  \u003cli\u003eEDID management via Lightware Device Controller\u003c\/li\u003e\n  \u003cli\u003eNo PoE — receiver requires local power supply (see HDMI-TPS-TX97 for PoE option)\u003c\/li\u003e\n  \u003cli\u003eCompatible with Lightware MX and DA infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConference rooms where AV rack is remote from the display wall plate\u003c\/li\u003e\n  \u003cli\u003eDigital signage installations with centrally racked media players\u003c\/li\u003e\n  \u003cli\u003eLecture theaters and training rooms with in-wall CATx infrastructure\u003c\/li\u003e\n  \u003cli\u003eRetail display environments with structured CATx cabling\u003c\/li\u003e\n  \u003cli\u003eFixed installations where the receiver location has accessible power\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n  \u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003cth style=\"padding:8px;border:1px solid #ddd;text-align:left;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding:8px;border:1px solid #ddd;text-align:left;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDMI Input\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e1x HDMI (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTPS Output\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e1x RJ-45 (HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMax Extension Distance\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eUp to 100 m (Cat6\/7) at 1080p\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDCP\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e2.2 \/ 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePoE Output\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eRS-232 Pass-Through\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eIR Pass-Through\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCATx Cable\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCat5e \/ Cat6 \/ Cat7\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eControl\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLightware Device Controller (Ethernet)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e91540067\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n  \u003ctr style=\"background:#f5f5f5;\"\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eCriteria\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eLightware HDMI-TPS-TX96\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eKramer TP-590RXR\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTechnology\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDBaseT\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDBaseT\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eDTP (HDBaseT-based)\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDBaseT\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMax Distance\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 m at 1080p\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 m at 1080p; 70 m at 4K\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e70 m at 4K\/60Hz\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 m at 1080p\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDCP 2.2\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePoE to Receiver\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eNo — receiver needs local PSU\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePowered from network switch PoE\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eNo\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eRS-232 \/ IR Pass-Through\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eEDID Management\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eSoftware via Device Controller\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCrestron Toolbox\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eFront-panel DIP + GUI\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eK-Config\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eBest Use Case\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eInstallations with accessible receiver power\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCrestron-controlled rooms\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eExtron-controlled rooms\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eRooms needing PoE at receiver\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePrice Tier\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMid-range — lower cost vs PoE models\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePremium\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMid-range\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMid-range\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat is the difference between the TX96 and TX97?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe HDMI-TPS-TX97 includes PoE output to power the paired receiver over the CATx cable. The TX96 does not include PoE — the paired RX96 receiver requires a local power supply at the display end. Choose the TX96 when the receiver location has accessible power and you want a lower-cost transmitter.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat resolution can I achieve at 100 meters?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eAt 100 meters on Cat6 or Cat7, 1080p\/60Hz is the reliable maximum. For 4K content, the maximum usable distance is reduced. Refer to Lightware's distance tables for 4K\/30Hz specifications.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eCan I connect the TX96 to a Lightware matrix switcher TPS output?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe TX96 is designed as a standalone transmitter with an HDMI input. For matrix switcher integration, Lightware's MX series boards include TPS outputs directly. Consult Creation Networks for system design guidance.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eDoes the RS-232 pass-through work bidirectionally?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. RS-232 data passes in both directions over the CATx link, enabling bidirectional communication between a control system at the source end and a display or device at the receiver end.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat CATx cable standard gives the best performance?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eCat6 or Cat7 shielded cable is recommended for maximum distance and immunity to electrical interference. Cat5e is acceptable for shorter runs in low-interference environments.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eIs the TX96 compatible with the RX97 receiver?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eFor basic HDBaseT signal extension, cross-compatibility is possible since both follow the HDBaseT standard. However, PoE and advanced control features are only fully supported when using matched TX96\/RX96 or TX97\/RX97 pairs.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973504762092,"sku":"91540067","price":775.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx96-tps-extender-for-single-catx-cable-91540067-creation-networks-15150.png?v=1757925274"},{"product_id":"lightware-hdmi-tps-rx96-tps-extender-for-single-catx-cable-91540066","title":"Lightware HDMI-TPS-RX96 TPS extender for single CATx cable - 91540066","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLightware HDMI-TPS-RX96\u003c\/strong\u003e (part number 91540066) is the receiver half of Lightware's TPS-TX96\/RX96 HDBaseT extender pair. It receives the HDBaseT signal transmitted from the HDMI-TPS-TX96 over a single Cat5e\/6\/7 cable and reconstructs it into a clean HDMI output for the local display. The RX96 requires a local power supply (not PoE-powered), making it the appropriate choice for installations where power is accessible at the display location and cost efficiency is the priority over PoE convenience.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx96-tps-extender-for-single-catx-cable-91540066-creation-networks-58567.png?v=1757925283\" alt=\"Lightware HDMI-TPS-RX96 receiver front\" style=\"max-width:100%;margin-bottom:12px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx96-tps-extender-for-single-catx-cable-91540066-creation-networks-99505.png?v=1757925284\" alt=\"Lightware HDMI-TPS-RX96 rear panel\" style=\"max-width:100%;margin-bottom:12px;\"\u003e\n\u003cp\u003eThe RX96 accepts the HDBaseT signal containing HDMI video, multi-channel audio, RS-232, and IR data, decodes it, and outputs the HDMI signal to the connected display. HDCP 2.2 is authenticated at the receiver end to ensure compliant playback of protected content. RS-232 and IR outputs enable control of the display or local room devices from the source location without additional cabling.\u003c\/p\u003e\n\u003cp\u003eThe compact form factor suits installation directly behind displays, in display mounting brackets, or in wall-recessed enclosures. Configuration via Lightware Device Controller allows remote EDID and signal status management. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHDBaseT input from HDMI-TPS-TX96 over single Cat5e\/6\/7 cable\u003c\/li\u003e\n  \u003cli\u003eHDMI output to local display\u003c\/li\u003e\n  \u003cli\u003eHDCP 2.2 compliant\u003c\/li\u003e\n  \u003cli\u003eLocal power supply required (not PoE-powered — see RX97 for PoE option)\u003c\/li\u003e\n  \u003cli\u003eRS-232 and IR output for local display control\u003c\/li\u003e\n  \u003cli\u003eCompact chassis for behind-display or mount installation\u003c\/li\u003e\n  \u003cli\u003eConfigurable via Lightware Device Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConference room displays where wall or ceiling power outlet is accessible\u003c\/li\u003e\n  \u003cli\u003eRetail display end-points with accessible local power\u003c\/li\u003e\n  \u003cli\u003eLecture theater screens with existing local power infrastructure\u003c\/li\u003e\n  \u003cli\u003eDigital signage end-points in installations where power is not an issue\u003c\/li\u003e\n  \u003cli\u003eCost-optimized installations where PoE is not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n  \u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003cth style=\"padding:8px;border:1px solid #ddd;text-align:left;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding:8px;border:1px solid #ddd;text-align:left;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTPS Input\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e1x RJ-45 (HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDMI Output\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e1x HDMI (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMax Extension Distance\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eUp to 100 m (Cat6\/7) at 1080p\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDCP\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e2.2 \/ 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePoE\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eNo — local PSU required\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eRS-232 Output\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eIR Output\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCATx Cable\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCat5e \/ Cat6 \/ Cat7\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eControl\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLightware Device Controller (Ethernet)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e91540066\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n  \u003ctr style=\"background:#f5f5f5;\"\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eCriteria\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eLightware HDMI-TPS-RX96\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eKramer TP-590RXR\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTechnology\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDBaseT\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDBaseT\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eDTP (HDBaseT-based)\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDBaseT\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMax Distance\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 m at 1080p\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 m at 1080p; 70 m at 4K\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e70 m at 4K\/60Hz\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 m at 1080p\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDCP 2.2\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePoE Powered\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eNo — local power required\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — PoE from switch\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eNo — local power required\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — from transmitter\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eRS-232 \/ IR\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — both\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — both\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — both\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — both\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCost vs PoE Model\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLower — no PoE circuitry\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eN\/A — PoE included at premium\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLower — no PoE\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHigher — PoE included\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eBest Use Case\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eAccessible power at receiver location\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePoE switch available \/ Crestron rooms\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eAccessible power at receiver\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eNo local power at receiver\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePrice Tier\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMid-range\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePremium\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMid-range\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMid-range\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat is the difference between the RX96 and RX97?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe HDMI-TPS-RX97 is powered via PoE from the paired TX97 transmitter — no local power supply is needed. The RX96 requires a local power supply at the receiver location. The RX96 is the cost-effective choice when power is available at the display end.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eCan the RX96 be wall-mounted behind a display?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. The compact chassis is designed for installation in display mounting brackets, behind-display enclosures, or wall-recessed AV boxes. Mounting hardware options vary by installation bracket type.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eDoes the RX96 support 4K?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe HDBaseT link supports 4K content at reduced cable distances. At full 100-meter runs on Cat6, 1080p\/60Hz is the reliable operating point. Shorter runs on Cat7 can support 4K\/30Hz — refer to Lightware's cable distance specifications for your specific resolution requirements.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat power supply is required for the RX96?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe RX96 uses a low-voltage DC power supply. Lightware specifies the exact voltage and current requirements — consult the product datasheet or contact Creation Networks for accessory PSU recommendations.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eIs the RX96 compatible with the TX97 transmitter?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eAt the HDBaseT protocol level, cross-compatibility is possible for basic signal extension. However, PoE and advanced feature support requires matched pairs. The RX96 will not be powered over CATx from the TX97 — it will still require its own local power supply.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eDoes audio pass through correctly?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. Multi-channel audio embedded in the HDMI signal — including Dolby Atmos and DTS:X — passes through the HDBaseT link and is output via the HDMI connector on the RX96.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973507154156,"sku":"91540066","price":775.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx96-tps-extender-for-single-catx-cable-91540066-creation-networks-58567.png?v=1757925283"},{"product_id":"lightware-hdmi-tps-tx87-tps-extender-for-single-catx-cable-with-poe","title":"Lightware HDMI-TPS-TX87 TPS extender for single CATx cable with Poe - 91540084","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPS-TX87 is a HDBaseT TPS transmitter that sends HDMI 2.0 signals over a single CATx cable to a compatible receiver such as the HDMI-TPS-RX87. Operating as the source-end unit, it accepts HDMI 2.0b input from a media player, PC, or AV source and converts the signal for transport over structured cabling at distances up to 100 meters. The built-in Power over Ethernet (PoE) supply port powers a connected PoE receiver, so only a single power connection at the transmitter is needed for the entire link.\u003c\/p\u003e\u003cp\u003eAvailable at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx87-tps-extender-for-single-catx-cable-with-poe-91540084-creation-networks-99306.jpg?v=1757925285\" alt=\"Lightware HDMI-TPS-TX87 HDBaseT TPS Transmitter\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe TX87 accepts HDMI 2.0b signals at up to 18 Gbps bandwidth, supporting 4K\/60Hz 4:4:4 and HDR10. It encapsulates HDMI video, multi-channel audio, Ethernet, RS-232, and IR signals into a single HDBaseT stream transmitted over Cat5e, Cat6, or Cat7 cable. The integrated PoE power supply (IEEE 802.3af PSE) removes the need for a local power adapter at the receive end. EDID management with internal EDID storage prevents source compatibility issues. Status LEDs on the front panel confirm link, PoE, and HDCP handshake state at a glance. The unit is designed for rack-adjacent or wall-mounted installation at the source equipment location.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHDMI 2.0b input with HDCP 2.2 support\u003c\/li\u003e\n\u003cli\u003e4K\/60Hz 4:4:4 8-bit and HDR10\/HLG transport\u003c\/li\u003e\n\u003cli\u003eHDBaseT output over Cat5e\/6\/7 up to 100m\u003c\/li\u003e\n\u003cli\u003eIntegrated PoE PSE — powers RX87 receiver over the CATx cable\u003c\/li\u003e\n\u003cli\u003eBidirectional RS-232 and IR control pass-through\u003c\/li\u003e\n\u003cli\u003e100Base-T Ethernet pass-through via HDBaseT\u003c\/li\u003e\n\u003cli\u003eEDID management with internal EDID memory\u003c\/li\u003e\n\u003cli\u003eStatus LEDs for link, HDCP, and PoE state\u003c\/li\u003e\n\u003cli\u003eDesigned as matched pair with HDMI-TPS-RX87\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCorporate AV installations distributing 4K content from rack-mounted PCs or media servers to remote displays\u003c\/li\u003e\n\u003cli\u003eUniversity classrooms where the instructor workstation is at a podium and the display is ceiling- or wall-mounted\u003c\/li\u003e\n\u003cli\u003eRetail digital signage with media players in back-of-house equipment racks feeding floor displays\u003c\/li\u003e\n\u003cli\u003eControl room to operator workstation display extension in broadcast or operations center environments\u003c\/li\u003e\n\u003cli\u003eHotel room AV systems with set-top boxes or IPTV equipment in closets feeding in-room displays\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHDMI-TPS-TX87\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540084\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Input\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0b (Type A connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Output\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (TPS) via RJ-45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 4K\/60Hz 4:4:4 8-bit; 4K\/60Hz 4:2:0 10-bit HDR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.2 and 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Extension Distance\u003c\/td\u003e\n\u003ctd\u003e100m (Cat5e\/6), 130m (Cat7) at 1080p\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Support\u003c\/td\u003e\n\u003ctd\u003eLPCM 7.1, Dolby Atmos, DTS:X (pass-through)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Pass-through\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet (100Base-T)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3af power sourcing equipment (PSE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Output Power\u003c\/td\u003e\n\u003ctd\u003eUp to 15.4W to connected receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eExternal 12V DC adapter (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e159 x 99 x 26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 340g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPS-TX87\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Bandwidth\u003c\/td\u003e\n\u003ctd\u003e18 Gbps (HDMI 2.0b)\u003c\/td\u003e\n\u003ctd\u003e18 Gbps (HDMI 2.0)\u003c\/td\u003e\n\u003ctd\u003e10.2 Gbps (HDMI 1.4)\u003c\/td\u003e\n\u003ctd\u003e10.2 Gbps (HDMI 1.4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4K\/60Hz 4:4:4\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo (4K\/30Hz only)\u003c\/td\u003e\n\u003ctd\u003eNo (4K\/30Hz only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntegrated PoE PSE\u003c\/td\u003e\n\u003ctd\u003eYes — powers receiver from TX end\u003c\/td\u003e\n\u003ctd\u003eYes (via separate PoE injector in some configs)\u003c\/td\u003e\n\u003ctd\u003eNo — receiver needs local PSU\u003c\/td\u003e\n\u003ctd\u003eNo — receiver needs local PSU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance (Cat6)\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003ctd\u003e90m\u003c\/td\u003e\n\u003ctd\u003e70m\u003c\/td\u003e\n\u003ctd\u003e70m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes (bidirectional)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes (100Base-T)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice Position\u003c\/td\u003e\n\u003ctd\u003e$709 — mid-range for HDMI 2.0 HDBaseT\u003c\/td\u003e\n\u003ctd\u003e~$850+ — premium brand premium\u003c\/td\u003e\n\u003ctd\u003e~$380 — lower spec, HDMI 1.4 only\u003c\/td\u003e\n\u003ctd\u003e~$360 — lower spec, HDMI 1.4 only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat receiver is the TX87 designed to work with?\u003c\/dt\u003e\n\u003cdd\u003eThe HDMI-TPS-TX87 is designed as a matched pair with the HDMI-TPS-RX87 receiver. Lightware tests and certifies performance as a pair. Third-party HDBaseT receivers may connect but full feature support is not guaranteed.\u003c\/dd\u003e\n\u003cdt\u003eDoes the TX87 include a power supply?\u003c\/dt\u003e\n\u003cdd\u003eYes. The TX87 ships with a 12V DC external power adapter. It also supplies PoE power (IEEE 802.3af) to the connected RX87 receiver over the CATx cable, so no additional PSU is needed at the display end.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable type gives the best performance?\u003c\/dt\u003e\n\u003cdd\u003eCat6 or Cat7 is recommended for 4K\/60Hz at maximum distances. Cat5e is supported but may limit reliable transmission distance at full 4K bandwidth. Shielded cable (STP\/FTP) is preferred in electrically noisy environments.\u003c\/dd\u003e\n\u003cdt\u003eCan the TX87 handle HDR sources?\u003c\/dt\u003e\n\u003cdd\u003eYes. HDMI 2.0b supports HDR10 and HLG metadata pass-through. The TX87 transports HDR flags transparently, provided the source outputs and the receiver passes them to an HDR-capable display.\u003c\/dd\u003e\n\u003cdt\u003eIs EDID management available?\u003c\/dt\u003e\n\u003cdd\u003eYes. The TX87 includes internal EDID storage and management. A fixed EDID can be loaded so the source device always sees a consistent display profile, preventing resolution or audio format negotiation failures during hot-plug events.\u003c\/dd\u003e\n\u003cdt\u003eWhat control signals can travel alongside the HDMI signal?\u003c\/dt\u003e\n\u003cdd\u003eThe TX87 passes bidirectional RS-232 (up to 115200 baud), IR (38kHz carrier), and 100Base-T Ethernet signals over the same CATx cable using HDBaseT's multi-signal transport layer.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973508759788,"sku":"91540084","price":709.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx87-tps-extender-for-single-catx-cable-with-poe-91540084-creation-networks-99306.jpg?v=1757925285"},{"product_id":"lightware-hdmi-tps-rx87-tps-extender-for-single-catx-cable-with-poe-91540085","title":"Lightware HDMI-TPS-RX87 TPS extender for single CATx cable with Poe - 91540085","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPS-RX87 is a HDBaseT TPS receiver designed for point-to-point extension of HDMI 2.0 signals over a single CATx cable at distances up to 100 meters. It operates as the receive-side unit in the HDMI-TPS-TX87\/RX87 extender pair, accepting HDBaseT input from the transmitter and outputting HDMI 2.0 to a local display. Power over Ethernet (PoE) support means the unit can be powered directly from the transmitter end, eliminating the need for a local power supply at the display.\u003c\/p\u003e\u003cp\u003eAvailable at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx87-tps-extender-for-single-catx-cable-with-poe-91540085-creation-networks-17793.jpg?v=1757925286\" alt=\"Lightware HDMI-TPS-RX87 HDBaseT TPS Receiver\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe HDMI-TPS-RX87 supports HDMI 2.0b with HDCP 2.2, enabling transport of 4K\/60Hz 4:4:4 video along with up to 8-channel audio. The unit passes through Ethernet, RS-232, and IR control signals alongside the video signal — making it suitable for installations where a single CATx run must carry all AV and control traffic. The built-in PoE receiver draws power from the HDBaseT link, so only the TX87 transmitter requires mains power. EDID management is handled locally, and the unit provides status LEDs for link confirmation. The form factor is compact and mountable, suited for behind-display or rack-adjacent installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHDMI 2.0b input\/output with HDCP 2.2 compliance\u003c\/li\u003e\n\u003cli\u003e4K\/60Hz 4:4:4 8-bit and HDR support\u003c\/li\u003e\n\u003cli\u003eHDBaseT extension up to 100m over Cat5e\/6\/7\u003c\/li\u003e\n\u003cli\u003ePower over Ethernet (PoE) — powered from transmitter, no local PSU needed\u003c\/li\u003e\n\u003cli\u003eBidirectional RS-232 and IR pass-through\u003c\/li\u003e\n\u003cli\u003e100Base-T Ethernet pass-through over HDBaseT link\u003c\/li\u003e\n\u003cli\u003eEDID management with stored EDID support\u003c\/li\u003e\n\u003cli\u003eCompact chassis with status LED indicators\u003c\/li\u003e\n\u003cli\u003eCompatible with HDMI-TPS-TX87 transmitter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCorporate boardrooms and huddle rooms with ceiling-mounted or wall-mounted displays\u003c\/li\u003e\n\u003cli\u003eHigher-education lecture halls requiring 4K source distribution to a single remote display\u003c\/li\u003e\n\u003cli\u003eDigital signage installations where the media player is located in a remote equipment rack\u003c\/li\u003e\n\u003cli\u003eHealthcare environments needing clean cable runs between control rooms and patient display areas\u003c\/li\u003e\n\u003cli\u003eBroadcast production facilities extending HDMI from capture equipment to monitoring positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHDMI-TPS-RX87\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540085\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Input\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (TPS) via RJ-45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Output\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0b (Type A connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 4K\/60Hz 4:4:4 8-bit; 4K\/60Hz 4:2:0 10-bit HDR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.2 and 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Extension Distance\u003c\/td\u003e\n\u003ctd\u003e100m (Cat5e\/6), 130m (Cat7) at 1080p\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Support\u003c\/td\u003e\n\u003ctd\u003eLPCM 7.1, Dolby Atmos, DTS:X (pass-through)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Pass-through\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet (100Base-T)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3af powered device (PD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eMax 12.95W (via PoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e159 x 99 x 26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 320g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPS-RX87\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Bandwidth\u003c\/td\u003e\n\u003ctd\u003e18 Gbps (HDMI 2.0b)\u003c\/td\u003e\n\u003ctd\u003e18 Gbps (HDMI 2.0)\u003c\/td\u003e\n\u003ctd\u003e10.2 Gbps (HDMI 1.4)\u003c\/td\u003e\n\u003ctd\u003e10.2 Gbps (HDMI 1.4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4K\/60Hz 4:4:4\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo (4K\/30Hz only)\u003c\/td\u003e\n\u003ctd\u003eNo (4K\/30Hz only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Support\u003c\/td\u003e\n\u003ctd\u003eYes — powered from TX end\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo — requires local PSU\u003c\/td\u003e\n\u003ctd\u003eNo — requires local PSU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance (Cat6)\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003ctd\u003e90m\u003c\/td\u003e\n\u003ctd\u003e70m\u003c\/td\u003e\n\u003ctd\u003e70m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes (bidirectional)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes (100Base-T)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice Position\u003c\/td\u003e\n\u003ctd\u003e$709 — mid-range for HDMI 2.0 HDBaseT\u003c\/td\u003e\n\u003ctd\u003e~$850+ — premium brand premium\u003c\/td\u003e\n\u003ctd\u003e~$400 — lower spec, HDMI 1.4 only\u003c\/td\u003e\n\u003ctd\u003e~$380 — lower spec, HDMI 1.4 only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eDoes the HDMI-TPS-RX87 require a separate power supply?\u003c\/dt\u003e\n\u003cdd\u003eNo. The RX87 is a PoE powered device (IEEE 802.3af PD). It draws power from the HDMI-TPS-TX87 transmitter over the HDBaseT cable, so no local mains power is needed at the receiver end.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable category is required for 4K\/60Hz performance?\u003c\/dt\u003e\n\u003cdd\u003eLightware specifies Cat6 or better for full 4K\/60Hz 4:4:4 at up to 100 meters. Cat5e may work at shorter distances but Cat6 or Cat7 is recommended for guaranteed performance.\u003c\/dd\u003e\n\u003cdt\u003eIs the RX87 compatible with third-party HDBaseT transmitters?\u003c\/dt\u003e\n\u003cdd\u003eThe RX87 is designed and tested as a matched pair with the HDMI-TPS-TX87. Interoperability with third-party HDBaseT transmitters is not guaranteed by Lightware and may result in reduced feature availability.\u003c\/dd\u003e\n\u003cdt\u003eDoes it support HDR content?\u003c\/dt\u003e\n\u003cdd\u003eYes. The HDMI-TPS-RX87 supports HDR10 and HLG through its HDMI 2.0b interface, provided the source and display also support the relevant HDR format.\u003c\/dd\u003e\n\u003cdt\u003eCan I pass control signals alongside video?\u003c\/dt\u003e\n\u003cdd\u003eYes. The unit passes bidirectional RS-232, IR, and 100Base-T Ethernet signals over the same CATx cable as the video, using the HDBaseT protocol's multi-signal transport.\u003c\/dd\u003e\n\u003cdt\u003eWhat is the maximum supported resolution?\u003c\/dt\u003e\n\u003cdd\u003e4K (3840x2160) at 60Hz with 4:4:4 chroma, 8-bit color depth. For HDR content at 4K\/60Hz, 4:2:0 12-bit is also supported.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973510725868,"sku":"91540085","price":709.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx87-tps-extender-for-single-catx-cable-with-poe-91540085-creation-networks-17793.jpg?v=1757925286"},{"product_id":"lightware-hdmi-tps-tx97-tps-extender-for-single-catx-cable-with-poe","title":"Lightware HDMI-TPS-TX97 TPS extender for single CATx cable with Poe - 91540024","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLightware HDMI-TPS-TX97\u003c\/strong\u003e (part number 91540024) is a professional HDBaseT transmitter that extends HDMI 2.0 signals, RS-232, IR, and power over a single Cat5e\/6\/7 cable to distances up to 100 meters. It features Power over Ethernet (PoE) capability, allowing the paired receiver to be powered from the transmitter location — eliminating the need for a local power supply at the display end. This is the transmitter half of the TPS-TX97\/RX97 extender pair.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx97-tps-extender-for-single-catx-cable-with-poe-91540024-creation-networks-51019.jpg?v=1757925287\" alt=\"Lightware HDMI-TPS-TX97 transmitter front view\" style=\"max-width:100%;margin-bottom:12px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/HDMI-TPS-TX97_Front.png?v=1757925288\" alt=\"Lightware HDMI-TPS-TX97 front panel detail\" style=\"max-width:100%;margin-bottom:12px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/HDMI-TPS-TX97_Rear-Axono.png?v=1757925290\" alt=\"Lightware HDMI-TPS-TX97 rear panel connections\" style=\"max-width:100%;margin-bottom:12px;\"\u003e\n\u003cp\u003eUsing HDBaseT technology, the HDMI-TPS-TX97 transmits 4K\/30Hz (or 1080p\/60Hz at longer distances) with HDCP 2.2 and multi-channel audio over standard CATx infrastructure. The PoE output eliminates the cable management complication of running a separate power line to ceiling-mounted or wall-recessed receiver units. RS-232 and IR pass-through on the CATx link enable bidirectional control between the AV rack and the display location without additional cabling.\u003c\/p\u003e\n\u003cp\u003eThe TX97 integrates with Lightware's TPS ecosystem and is configurable via Lightware Device Controller for EDID management and signal monitoring. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e. Pair with the \u003cstrong\u003eHDMI-TPS-RX97\u003c\/strong\u003e receiver for a complete extender solution.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHDBaseT transmission over single Cat5e\/6\/7 cable up to 100 meters\u003c\/li\u003e\n  \u003cli\u003eHDMI 2.0 input: 4K\/60Hz source support (4K\/30Hz extended, 1080p\/60Hz full distance)\u003c\/li\u003e\n  \u003cli\u003eHDCP 2.2 compliance\u003c\/li\u003e\n  \u003cli\u003ePower over Ethernet (PoE) output — powers the paired RX97 receiver\u003c\/li\u003e\n  \u003cli\u003eRS-232 and IR pass-through over the CATx link\u003c\/li\u003e\n  \u003cli\u003eEDID management via Lightware Device Controller\u003c\/li\u003e\n  \u003cli\u003eCompatible with Lightware MX and DA series infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCorporate conference rooms extending HDMI from AV rack to wall plate or ceiling display\u003c\/li\u003e\n  \u003cli\u003eUniversity lecture theaters distributing from lectern AV to remote projector or display\u003c\/li\u003e\n  \u003cli\u003eHospitality AV systems with long in-wall CATx cable runs\u003c\/li\u003e\n  \u003cli\u003eDigital signage installations where media players are centrally racked\u003c\/li\u003e\n  \u003cli\u003eRetail environments with displays located far from the source equipment room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n  \u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003cth style=\"padding:8px;border:1px solid #ddd;text-align:left;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding:8px;border:1px solid #ddd;text-align:left;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDMI Input\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e1x HDMI 2.0 (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTPS Output\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e1x RJ-45 (HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMax Extension Distance\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eUp to 100 m (Cat6\/7) at 1080p\/60Hz; reduced at 4K\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMax Resolution (source)\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e4K\/60Hz 4:4:4 at HDMI input\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDCP\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e2.2 \/ 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePoE\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — powers paired RX97\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eRS-232 Pass-Through\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eIR Pass-Through\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCATx Cable\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCat5e \/ Cat6 \/ Cat7\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eControl\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLightware Device Controller (Ethernet)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e91540024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n  \u003ctr style=\"background:#f5f5f5;\"\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eCriteria\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eLightware HDMI-TPS-TX97\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eKramer TP-590RXR\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTechnology\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDBaseT over single CATx\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDBaseT over single CATx\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eDTP (HDBaseT-based) over CATx\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDBaseT over CATx\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMax Distance\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 m at 1080p; reduced at 4K\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 m at 1080p; 70 m at 4K\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e70 m at 4K\/60Hz\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 m at 1080p; 70 m at 4K\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDCP 2.2\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePoE (powers receiver)\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes (PoE powered from switch)\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eNo — receiver needs local PSU\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes (PoE from transmitter)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eRS-232 \/ IR Pass-Through\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eEDID Management\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eSoftware-based via Device Controller\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCrestron Toolbox\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eFront-panel DIP + GUI\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eK-Config software\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eEcosystem Integration\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLightware MX \/ DA series\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCrestron ecosystem only\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eExtron DTP ecosystem\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eKramer ProScale ecosystem\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePrice Tier\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMid-range\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePremium — Crestron pricing\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMid-range\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMid-range\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003e\u003cstrong\u003eDoes PoE from the TX97 fully power the RX97 receiver?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. When paired with the HDMI-TPS-RX97, the TX97 supplies power over the CATx cable via PoE, eliminating the need for a separate power supply at the receiver end. This simplifies installation at ceiling-mounted or wall-recessed display locations.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat resolution is supported at 100 meters?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eAt 100 meters on Cat6 or Cat7 cable, 1080p\/60Hz is reliably supported. For 4K content, the maximum extension distance is reduced — consult Lightware's cable distance specifications for 4K\/30Hz and 4K\/60Hz operation.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eCan RS-232 commands pass bidirectionally?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. The RS-232 pass-through operates bidirectionally over the CATx link, enabling a control system at the rack end to send commands to a display at the receiver location, and the display to return status responses.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eIs Cat5e cable sufficient, or is Cat6 required?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eCat5e is supported for shorter runs. For maximum distance and 4K performance, Cat6 or Cat7 is recommended. Shielded cable (STP) is advisable in high-interference environments.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eDoes the TX97 work with non-Lightware receivers?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe TX97 uses the HDBaseT standard, so it has interoperability with other HDBaseT-compliant devices. However, full feature support — including PoE and control pass-through — is only guaranteed when paired with the Lightware HDMI-TPS-RX97.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eIs audio pass-through supported?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. Multi-channel audio including Dolby Atmos and DTS:X passes through the HDBaseT link to the receiver and is output via the HDMI connection at the display end.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973512855788,"sku":"91540024","price":808.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx97-tps-extender-for-single-catx-cable-with-poe-91540024-creation-networks-51019.jpg?v=1757925287"},{"product_id":"lightware-hdmi-tps-rx97-tps-extender-for-single-catx-cable-with-poe-91540023","title":"Lightware HDMI-TPS-RX97 TPS extender for single CATx cable with Poe - 91540023","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLightware HDMI-TPS-RX97\u003c\/strong\u003e (part number 91540023) is the receiver half of Lightware's HDBaseT TPS extender pair. It accepts the HDBaseT signal from a paired HDMI-TPS-TX97 transmitter over a single Cat5e\/6\/7 cable and outputs a clean HDMI 2.0 signal to the local display. With Power over Ethernet (PoE) input, it can operate without a local power supply when powered from the TX97, significantly simplifying installation at remote display locations.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx97-tps-extender-for-single-catx-cable-with-poe-91540023-creation-networks-49547.jpg?v=1757925293\" alt=\"Lightware HDMI-TPS-RX97 HDBaseT receiver\" style=\"max-width:100%;margin-bottom:12px;\"\u003e\n\u003cp\u003eThe RX97 receives the HDBaseT signal carrying HDMI video, multi-channel audio, RS-232, and IR control data, reconstructs the HDMI signal, and outputs it directly to the connected display. The unit supports HDCP 2.2 authentication at the receiver end, ensuring protected content is delivered correctly to compliant displays. RS-232 and IR outputs allow the display or other room devices to be controlled from the source end without additional cabling.\u003c\/p\u003e\n\u003cp\u003eThe compact chassis is suited for installation behind displays, in display mounts, or in wall-mounted enclosures. Configure via Lightware Device Controller over the network for EDID and signal status monitoring. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e. Pair with the \u003cstrong\u003eHDMI-TPS-TX97\u003c\/strong\u003e for a complete extender solution.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHDBaseT input via single Cat5e\/6\/7 cable from HDMI-TPS-TX97\u003c\/li\u003e\n  \u003cli\u003eHDMI 2.0 output to local display — up to 4K resolution\u003c\/li\u003e\n  \u003cli\u003eHDCP 2.2 compliant\u003c\/li\u003e\n  \u003cli\u003ePoE input — powered from TX97 over the CATx cable (no local PSU required)\u003c\/li\u003e\n  \u003cli\u003eRS-232 and IR output for local display control\u003c\/li\u003e\n  \u003cli\u003eCompact chassis for behind-display or wall-mount installation\u003c\/li\u003e\n  \u003cli\u003eConfigurable via Lightware Device Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConference room displays receiving HDMI from a centrally racked AV system\u003c\/li\u003e\n  \u003cli\u003eCeiling-mounted projectors powered and controlled from the rack without local PSU\u003c\/li\u003e\n  \u003cli\u003eHospitality in-room displays driven from a centralized media server\u003c\/li\u003e\n  \u003cli\u003eUniversity lecture theater remote screens\u003c\/li\u003e\n  \u003cli\u003eDigital signage end-point displays with centralized media players\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n  \u003ctr style=\"background:#f5f5f5;\"\u003e\n\u003cth style=\"padding:8px;border:1px solid #ddd;text-align:left;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding:8px;border:1px solid #ddd;text-align:left;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTPS Input\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e1x RJ-45 (HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDMI Output\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e1x HDMI 2.0 (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMax Extension Distance\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eUp to 100 m (Cat6\/7) at 1080p\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDCP\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e2.2 \/ 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePoE\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — powered from TX97 over CATx\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eRS-232 Output\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eIR Output\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCATx Cable\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCat5e \/ Cat6 \/ Cat7\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eControl\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLightware Device Controller (Ethernet)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e91540023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n  \u003ctr style=\"background:#f5f5f5;\"\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eCriteria\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eLightware HDMI-TPS-RX97\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n    \u003cth style=\"padding:8px;border:1px solid #ddd;\"\u003eKramer TP-590RXR\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eTechnology\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDBaseT\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDBaseT\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eDTP (HDBaseT-based)\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDBaseT\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMax Distance\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 m at 1080p; reduced at 4K\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 m at 1080p; 70 m at 4K\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e70 m at 4K\/60Hz\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003e100 m at 1080p; 70 m at 4K\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eHDCP 2.2\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePoE Powered\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — from TX97, no local PSU needed\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — PoE from network switch\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eNo — local PSU required at receiver\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — from paired transmitter\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eRS-232 \/ IR\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — both\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — both\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — both\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eYes — both\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eInstallation Form Factor\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCompact — behind-display mount\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCompact — bracket mount\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCompact\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCompact\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eEcosystem Lock-in\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eLightware — open to 3rd-party control\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eCrestron ecosystem preferred\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eExtron DTP ecosystem\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eKramer ecosystem\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePrice Tier\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMid-range\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003ePremium\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMid-range\u003c\/td\u003e\n    \u003ctd style=\"padding:8px;border:1px solid #ddd;\"\u003eMid-range\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003e\u003cstrong\u003eDoes the RX97 require its own power supply?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eNo — when paired with the HDMI-TPS-TX97 transmitter, the RX97 is powered via PoE over the CATx cable. If used with a transmitter that does not supply PoE, a separate power supply is required.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat happens if the CATx cable is longer than the specified distance?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eSignal quality degrades beyond the rated distance, which can manifest as image artifacts, intermittent dropouts, or complete loss of signal. Use Cat7 shielded cable for maximum reach and ensure cables are uncoiled and run without sharp bends.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eCan I control the display via RS-232 from the source end?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. The RS-232 pass-through is bidirectional. A control system connected to the TX97 end can send RS-232 commands to the display via the RX97's RS-232 output port, and receive status responses back.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eIs the RX97 compatible with HDBaseT transmitters from other brands?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eAs an HDBaseT-compliant device, the RX97 has basic interoperability with other HDBaseT transmitters. Full feature support including PoE pass-through and control channels is guaranteed only with the paired HDMI-TPS-TX97.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eDoes it output audio as well as video?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. All audio data embedded in the HDMI signal — including Dolby Atmos and DTS:X — is output via the HDMI connector on the RX97 to the connected display's audio system.\u003c\/dd\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhat cable category is recommended for 4K performance?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eCat6 or Cat7 is recommended for 4K operation. Cat5e may support 4K at shorter distances but is not recommended for maximum distance or in electrically noisy environments.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973514461420,"sku":"91540023","price":808.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx97-tps-extender-for-single-catx-cable-with-poe-91540023-creation-networks-49547.jpg?v=1757925293"},{"product_id":"lightware-hdmi-tps-rx110ay-hdbaset™-receiver-with-relay-modules-and-balanced-audio-out","title":"Lightware HDMI-TPS-RX110AY HDBaseT™ Receiver with Relay Modules and Balanced Audio Out - 91540021","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Lightware HDMI-TPS-RX110AY is an HDBaseT receiver that accepts video, audio, RS-232, IR, Ethernet, and PoE signals transmitted over a single Cat cable and outputs them to a local HDMI display, with the addition of relay control modules and a balanced analog audio output for direct connection to professional audio systems. Designed for permanent commercial AV installations, it eliminates multiple cable runs from a head-end equipment rack to the display location and provides the relay switching capability required for display power control, screen drops, and room automation without a separate relay panel. The HDMI-TPS-RX110AY is a practical HDBaseT receiver solution for corporate meeting rooms, classrooms, and hospitality AV environments.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe HDMI-TPS-RX110AY receives the full HDBaseT signal bundle from a compatible Lightware TPS transmitter — including HDMI video, embedded audio, RS-232, IR, and 100Mbps Ethernet — over a single Cat5e or Cat6 cable at distances up to 100 meters. The unit outputs HDMI to the local display and de-embeds audio to both a balanced XLR output and an analog stereo output, making it directly compatible with commercial audio amplifiers and DSPs without an external de-embedder. Built-in relay modules provide potential-free contact closures for controlling display power, motorized screens, projector lifts, or other room automation hardware from the control system, consolidating display-end control into a single device. Power over HDBaseT (PoH) eliminates the need for a local power adapter at the receiver when used with a compatible PoH-enabled transmitter or switch. Status LEDs on the front panel indicate link activity, power state, and relay status for fast on-site troubleshooting. Integration with room control systems is via the RS-232 interface or by the transparent pass-through of control commands from the transmitter end. EDID management is handled through the Lightware TPS ecosystem for reliable source handshake with all connected displays.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx110ay-hdbasettm-receiver-with-relay-modules-and-balanced-audio-out-91540021-creation-networks-99873.jpg?v=1757925293\" alt=\"Lightware HDMI-TPS-RX110AY HDBaseT receiver front panel\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx110ay-hdbasettm-receiver-with-relay-modules-and-balanced-audio-out-91540021-creation-networks-98121.jpg?v=1757925294\" alt=\"Lightware HDMI-TPS-RX110AY receiver connections and relay outputs\"\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHDBaseT Reception\u003c\/strong\u003e — Receives HDMI, audio, RS-232, IR, and Ethernet over a single Cat5e\/6 cable to 100m\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelay Control Modules\u003c\/strong\u003e — Built-in potential-free relays for display power control, screen automation, and room switching\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBalanced XLR Audio Output\u003c\/strong\u003e — De-embeds audio to balanced analog for direct connection to professional audio amplifiers and DSPs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHDMI Output\u003c\/strong\u003e — Delivers the received video signal to local display with full signal integrity\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower over HDBaseT (PoH)\u003c\/strong\u003e — Can be powered through the Cat cable from a PoH transmitter, eliminating local adapter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Pass-Through\u003c\/strong\u003e — Transparent bidirectional control signal transport for room control integration\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEthernet Extension\u003c\/strong\u003e — 100Mbps network pass-through to the display location over the TPS cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFront-Panel Status LEDs\u003c\/strong\u003e — Visual indicators for link, power, and relay status for rapid troubleshooting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — Works within Lightware TPS ecosystem for consistent source\/display compatibility\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact Rack or Surface Mount\u003c\/strong\u003e — Small form factor for installation behind displays, in furniture, or in rack bays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCorporate meeting rooms requiring HDBaseT extension with integrated display relay control and balanced audio output\u003c\/li\u003e\n  \u003cli\u003eUniversity classrooms extending AV signals from a rack to a projector with motorized screen relay control\u003c\/li\u003e\n  \u003cli\u003eHotel function rooms distributing presenter signals from a head-end rack with relay-controlled display power\u003c\/li\u003e\n  \u003cli\u003eBoardrooms connecting balanced audio output directly to a room DSP or amplifier without an external de-embedder\u003c\/li\u003e\n  \u003cli\u003eGovernment briefing rooms with structured Cat cabling infrastructure and relay-controlled AV equipment\u003c\/li\u003e\n  \u003cli\u003eHouses of worship routing signals from a production rack to display locations with screen drop and lighting control relays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTPS Input\u003c\/td\u003e\n\u003ctd\u003e1x RJ-45 (HDBaseT, Cat5e\/6)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eVideo Output\u003c\/td\u003e\n\u003ctd\u003e1x HDMI (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p60 \/ WUXGA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003eUp to 100m (Cat6)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAudio Output\u003c\/td\u003e\n\u003ctd\u003eBalanced XLR (stereo), Analog 3.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRelay Outputs\u003c\/td\u003e\n\u003ctd\u003ePotential-free relay contacts (quantity per model)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e100Mbps pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e12V DC (adapter included) or PoH from transmitter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e≤10W\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eVia Lightware TPS ecosystem\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eCompact rack\/surface mount\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPS-RX110AY\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p60\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100m (Cat6)\u003c\/td\u003e\n\u003ctd\u003e100m (Cat6A)\u003c\/td\u003e\n\u003ctd\u003e70m (Cat6)\u003c\/td\u003e\n\u003ctd\u003e100m (Cat6)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRelay Control Outputs\u003c\/td\u003e\n\u003ctd\u003eYes, built-in relay modules\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eBalanced Audio Output\u003c\/td\u003e\n\u003ctd\u003eYes, XLR\u003c\/td\u003e\n\u003ctd\u003eNo (HDMI embedded only)\u003c\/td\u003e\n\u003ctd\u003eYes (some models)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRS-232 Pass-Through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIR Pass-Through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eEthernet Extension\u003c\/td\u003e\n\u003ctd\u003eYes, 100Mbps\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePower over HDBaseT\u003c\/td\u003e\n\u003ctd\u003eYes (PoH)\u003c\/td\u003e\n\u003ctd\u003eYes (PoE)\u003c\/td\u003e\n\u003ctd\u003eYes (PoE)\u003c\/td\u003e\n\u003ctd\u003eYes (PoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eWhat are the relay modules used for in a typical installation?\u003c\/dt\u003e\n  \u003cdd\u003eThe relay contacts are commonly wired to display power control terminals, motorized projection screen triggers, projector lift power, or room lighting control. When the control system or the HDBaseT link state changes, the relay can be commanded to open or close, automating display-end room behavior without a separate relay panel.\u003c\/dd\u003e\n  \u003cdt\u003eDoes the balanced XLR output require phantom power, or is it a line-level output?\u003c\/dt\u003e\n  \u003cdd\u003eThe balanced XLR output is a line-level analog audio output. It does not require or provide phantom power. Connect it directly to balanced inputs on DSPs, amplifiers, or audio mixers at the display location.\u003c\/dd\u003e\n  \u003cdt\u003eCan this receiver work with any HDBaseT transmitter, or only Lightware?\u003c\/dt\u003e\n  \u003cdd\u003eThe HDMI-TPS-RX110AY uses the HDBaseT standard, so basic video and audio reception may function with third-party HDBaseT transmitters. However, Lightware-specific features — including relay control commands, EDID management, and PoH — are validated only with matched Lightware TPS transmitters. For full functionality, use Lightware transmitters such as the UMX-TPS-TX120.\u003c\/dd\u003e\n  \u003cdt\u003eHow are the relay outputs controlled — from the control system or automatically?\u003c\/dt\u003e\n  \u003cdd\u003eRelay control commands are passed from the control system via RS-232 through the TPS link, or the relay can be configured to trigger automatically based on the HDMI link state. For example, the relay can be set to close when an active HDMI source is detected and open when the signal is removed, providing automatic display power control.\u003c\/dd\u003e\n  \u003cdt\u003eDoes the receiver support 4K sources?\u003c\/dt\u003e\n  \u003cdd\u003eThe HDMI-TPS-RX110AY supports up to 1080p60 and WUXGA. For 4K HDBaseT extension, Lightware offers TPS products supporting HDMI 2.0 and 4K60 transmission. Contact \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e to identify the appropriate 4K-capable receiver for your application.\u003c\/dd\u003e\n  \u003cdt\u003eIs there a local HDMI loop-out in addition to the main HDMI output?\u003c\/dt\u003e\n  \u003cdd\u003eVerify with the current product datasheet whether a loop-out output is included on this specific model. If dual outputs are required at the display end, Lightware offers TPS receiver variants with multiple output ports.\u003c\/dd\u003e\n  \u003cdt\u003eWhere can I purchase a matched transmitter to build a complete HDBaseT system?\u003c\/dt\u003e\n  \u003cdd\u003eThe Lightware UMX-TPS-TX120 is the matched transmitter for this receiver and is available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e. Our team can configure complete end-to-end HDBaseT systems including transmitters, receivers, Cat cable, and supporting hardware for single-room or multi-room deployments.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973517213932,"sku":"91540021","price":1798.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx110ay-hdbasettm-receiver-with-relay-modules-and-balanced-audio-out-91540021-creation-networks-99873.jpg?v=1757925293"},{"product_id":"lightware-hdmi-tps-rx110ay-plus-hdbaset™-receiver-with-relay-modules-and-balanced-audio-out-91540070","title":"Lightware HDMI-TPS-RX110AY-Plus HDBaseT™ Receiver with Relay Modules and Balanced Audio Out - 91540070","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPS-RX110AY-Plus is an HDBaseT receiver that combines HDMI video output with integrated relay modules and balanced audio output, designed for commercial AV installations where display automation and audio distribution are required at the endpoint. It receives HDMI video and audio over a single CATx cable from a compatible TPS transmitter, and provides relay contact closures for display power control and balanced audio output for routing to room amplifiers or DSPs. This makes it a particularly capable receiver for boardrooms, conference rooms, and auditoriums where automated room control is required.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe HDMI-TPS-RX110AY-Plus extends HDBaseT-compatible TPS signals from a transmitter over a single Cat5e or Cat6 cable and provides HDMI output at the display location. In addition to standard TPS receiver functionality, the unit includes integrated relay modules that can be used to control display power, screen drops, lighting, or other room automation devices that require dry contact control. This eliminates the need for a separate relay control box at the display endpoint, reducing equipment count and simplifying system design.\u003c\/p\u003e\u003cp\u003eThe balanced audio output extracts the embedded audio from the HDMI signal and provides it on a balanced XLR or terminal block output, allowing the room amplifier or DSP to receive a clean, interference-resistant audio feed without additional audio extractors. RS-232 and IR pass-through channels enable display control from the transmitter or a central control system. EDID management is programmable at the receiver for consistent handshaking. The LW3 control protocol integrates with Crestron, AMX, Extron, and other control systems for full room automation capability.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx110ay-plus-hdbasettm-receiver-with-relay-modules-and-balanced-audio-out-91540070-creation-networks-23282.jpg?v=1757925295\" alt=\"Lightware HDMI-TPS-RX110AY-Plus HDBaseT receiver with relay and balanced audio\"\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT TPS Receiver\u003c\/strong\u003e — Receives HDMI and control signals over a single CATx cable from a compatible TPS transmitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Relay Modules\u003c\/strong\u003e — Built-in relay contact closures for display power control, screen automation, and room device triggering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Audio Output\u003c\/strong\u003e — Extracts embedded HDMI audio and outputs balanced analog audio for room amplifiers and DSPs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI Output\u003c\/strong\u003e — Delivers video to the connected display with full HDCP compliance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Pass-through\u003c\/strong\u003e — Extends display control commands from the transmitter or central control system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — Programmable EDID emulation for reliable source-to-display handshaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLW3 Protocol\u003c\/strong\u003e — Open IP control integration with Crestron, AMX, Extron, and building automation systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle CATx Infrastructure\u003c\/strong\u003e — Leverages existing Cat5e \/ Cat6 structured cabling for video, audio, power, and control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Equipment Count\u003c\/strong\u003e — Combines receiver, relay control, and audio extraction in a single device at the display endpoint\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardrooms requiring automated display power control triggered by source presence or control panel\u003c\/li\u003e\n\u003cli\u003eConference rooms with room amplifiers or DSPs needing a clean balanced audio feed from the AV system\u003c\/li\u003e\n\u003cli\u003eTraining facilities where motorized projection screens or blinds are triggered by relay contacts\u003c\/li\u003e\n\u003cli\u003eAuditoriums distributing balanced audio to a house audio system alongside HDMI display output\u003c\/li\u003e\n\u003cli\u003eHospitality meeting rooms combining display automation and audio distribution at the display endpoint\u003c\/li\u003e\n\u003cli\u003eHouses of worship distributing video and audio to display and sound system from a central media rack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Standard\u003c\/td\u003e\n\u003ctd\u003eHDMI (HDBaseT TPS receive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLink Type\u003c\/td\u003e\n\u003ctd\u003eLightware TPS (HDBaseT-compatible) over CATx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eCat5e \/ Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Output\u003c\/td\u003e\n\u003ctd\u003eBalanced analog audio (extracted from HDMI embed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay Modules\u003c\/td\u003e\n\u003ctd\u003eIntegrated relay contact closures for room automation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable emulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eLocal power supply (or PoE from transmitter where supported)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPS-RX110AY-Plus\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay Modules\u003c\/td\u003e\n\u003ctd\u003eBuilt-in relay contacts for display and room automation\u003c\/td\u003e\n\u003ctd\u003eNo built-in relay — separate relay module required\u003c\/td\u003e\n\u003ctd\u003eNo built-in relay — separate module required\u003c\/td\u003e\n\u003ctd\u003eNo built-in relay on standard models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBalanced Audio Output\u003c\/td\u003e\n\u003ctd\u003eYes — extracts balanced analog audio from HDMI embed\u003c\/td\u003e\n\u003ctd\u003eNo balanced audio output on standard receiver\u003c\/td\u003e\n\u003ctd\u003eAudio extraction available on selected models\u003c\/td\u003e\n\u003ctd\u003eAudio de-embedding on selected models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Pass-through\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR via TPS link\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet via DM cable\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR via DTP\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR via CATx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eOpen LW3; any control system\u003c\/td\u003e\n\u003ctd\u003eCrestron-centric; limited third-party\u003c\/td\u003e\n\u003ctd\u003eSIS commands; broad third-party\u003c\/td\u003e\n\u003ctd\u003eRS-232\/IP; broad third-party\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable via LW3\u003c\/td\u003e\n\u003ctd\u003eVia Crestron toolbox\u003c\/td\u003e\n\u003ctd\u003eVia Extron SMP\u003c\/td\u003e\n\u003ctd\u003eVia Kramer K-Upload\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-Device Simplicity\u003c\/td\u003e\n\u003ctd\u003eReceiver + relay + audio extraction in one unit\u003c\/td\u003e\n\u003ctd\u003eReceiver only; relay and audio need additional hardware\u003c\/td\u003e\n\u003ctd\u003eReceiver only on standard model\u003c\/td\u003e\n\u003ctd\u003eReceiver only on standard model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e \/ Cat6\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e \/ Cat6\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e \/ Cat6\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e \/ Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat can the relay contacts on the RX110AY-Plus control?\u003c\/dt\u003e\n\u003cdd\u003eThe relay contacts are dry-contact closures that can trigger any device using contact-closure control: displays (via display power relay input), motorized projection screens, room lighting circuits, HVAC occupancy systems, electronic door locks, and other building automation devices. They are typically controlled by the room control system via LW3 commands sent to the receiver.\u003c\/dd\u003e\n\u003cdt\u003eHow does the balanced audio output work?\u003c\/dt\u003e\n\u003cdd\u003eThe receiver extracts the analog audio embedded in the HDMI signal from the TPS link and outputs it on a balanced connection. Balanced audio provides significantly better rejection of electrical interference over long cable runs compared to unbalanced HDMI audio, making it appropriate for sending audio to room amplifiers, DSPs, or ceiling speaker distribution systems.\u003c\/dd\u003e\n\u003cdt\u003eDoes this receiver require a local power supply?\u003c\/dt\u003e\n\u003cdd\u003eThe unit includes a local power supply input. Whether it can also receive power from the TPS link depends on the specific transmitter pairing — confirm with Lightware documentation or Creation Networks for your specific configuration.\u003c\/dd\u003e\n\u003cdt\u003eWhat transmitter is compatible with the HDMI-TPS-RX110AY-Plus?\u003c\/dt\u003e\n\u003cdd\u003eThe receiver is compatible with Lightware TPS transmitters in the supported series. Contact Creation Networks for a confirmed transmitter pairing recommendation based on your cable run lengths and resolution requirements.\u003c\/dd\u003e\n\u003cdt\u003eCan the relay and audio functions be controlled independently of the video signal?\u003c\/dt\u003e\n\u003cdd\u003eYes. The relay contacts and audio output can be managed independently via LW3 commands from the control system, allowing separate control of room automation functions regardless of the video signal state.\u003c\/dd\u003e\n\u003cdt\u003eIs this receiver suitable for a house of worship or auditorium with a professional audio system?\u003c\/dt\u003e\n\u003cdd\u003eYes. The balanced audio output is specifically suited to feeding professional audio systems, including mixing consoles, DSPs, and amplifier racks, where balanced interconnects are standard and hum\/noise rejection over long cable runs is required.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the HDMI-TPS-RX110AY-Plus?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller for commercial AV integration projects including conference rooms, auditoriums, and houses of worship.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43973521146092,"sku":"91540070","price":1963.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx110ay-plus-hdbasettm-receiver-with-relay-modules-and-balanced-audio-out-91540070-creation-networks-23282.jpg?v=1757925295"},{"product_id":"lightware-hdmi-tps-tx210-tps-hdbasettm-extender-for-hdmi-with-local-monitor-out","title":"Lightware HDMI-TPS-TX210 TPS (HDBaseTTM) Extender for HDMI with Local Monitor Out - 91540017","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPS-TX210 is a compact HDBaseT transmitter that extends HDMI signals up to 100 meters over a single shielded CAT6\/7 cable with a local HDMI monitor output for presenter use. As the entry point in Lightware's TPS transmitter family, the TX210 delivers reliable HDMI extension for 1080p and standard 4K workflows in corporate conference rooms, training rooms, and education facilities. The unit supports RS-232 and IR control pass-through, enabling direct integration with room control systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe HDMI-TPS-TX210 is designed for installations where an HDMI source — such as a laptop, Blu-ray player, streaming device, or fixed PC — needs to be extended to a display mounted too far for a direct HDMI cable run. Using the HDBaseT standard, the unit carries HDMI video, embedded audio, RS-232, and IR over a single CAT cable, consolidating what would otherwise require multiple cable runs into a single infrastructure path.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx210-tps-hdbasettm-extender-for-hdmi-with-local-monitor-out-91540017-creation-networks-68779.jpg?v=1757925296\" alt=\"Lightware HDMI-TPS-TX210 HDBaseT transmitter\"\u003e\u003c\/p\u003e\u003cp\u003eThe local HDMI monitor output provides a continuous mirror of the source signal at the transmitter end, independent of TPS link status. This is particularly useful at presenter stations and podiums where the speaker needs to see the content being displayed in the room. RS-232 bidirectional pass-through and IR support allow a control system to communicate with display equipment at the receiver end over the same CAT cable. The TX210 is managed via Lightware's LW3 open protocol over Ethernet.\u003c\/p\u003e\u003cp\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware dealer serving commercial AV integrators across North America.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT transmission up to 100m\u003c\/strong\u003e — extends HDMI over shielded CAT6\/7 with full signal integrity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocal HDMI monitor output\u003c\/strong\u003e — continuous loop-out for presenter confidence monitoring at the transmitter end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1080p and 4K source support\u003c\/strong\u003e — handles standard HD and UHD HDMI sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBidirectional RS-232 pass-through\u003c\/strong\u003e — routes serial control between the control system and far-end display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR pass-through\u003c\/strong\u003e — enables IR control of devices at the receiver end via the TPS cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP compliant\u003c\/strong\u003e — supports copy-protected content from all standard HDMI sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLW3 protocol\u003c\/strong\u003e — open Ethernet-based API for control system integration and diagnostics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact form factor\u003c\/strong\u003e — suited for rack installation or surface-mounting in AV furniture\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms where a laptop or fixed PC must reach a display more than 10 meters away\u003c\/li\u003e\n\u003cli\u003eBoardrooms with rack-mounted source equipment extending to a far-end display wall\u003c\/li\u003e\n\u003cli\u003eTraining rooms with instructor podiums requiring a local confidence monitor and HDMI extension\u003c\/li\u003e\n\u003cli\u003eHuddle rooms with simple single-source HDMI distribution to a display over existing CAT cabling\u003c\/li\u003e\n\u003cli\u003eEducation classrooms with wall-mounted displays and centralized AV source equipment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003e1x HDMI (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Output\u003c\/td\u003e\n\u003ctd\u003e1x RJ-45 (HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Monitor Output\u003c\/td\u003e\n\u003ctd\u003e1x HDMI (Type A) loop-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p@60Hz (4:4:4); 4K supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e100m over shielded CAT6\/7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232 (bidirectional), IR, LW3 (Ethernet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power Output\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eExternal PSU included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPS-TX210\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100m CAT6\/7\u003c\/td\u003e\n\u003ctd\u003e90m CAT6A\u003c\/td\u003e\n\u003ctd\u003e70m CAT6\u003c\/td\u003e\n\u003ctd\u003e100m CAT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Monitor Output\u003c\/td\u003e\n\u003ctd\u003eYes, HDMI loop-out\u003c\/td\u003e\n\u003ctd\u003eNo TX loop-out\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW3, RS-232, IR\u003c\/td\u003e\n\u003ctd\u003eCrestron proprietary\u003c\/td\u003e\n\u003ctd\u003eSIS, RS-232\u003c\/td\u003e\n\u003ctd\u003eRS-232, IP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen API\u003c\/td\u003e\n\u003ctd\u003eYes (LW3)\u003c\/td\u003e\n\u003ctd\u003eLimited to Crestron\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eCompact tabletop\/rack\u003c\/td\u003e\n\u003ctd\u003eSmall wall\/rack\u003c\/td\u003e\n\u003ctd\u003eHalf-rack 1U\u003c\/td\u003e\n\u003ctd\u003eHalf-rack 1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT Standard\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat is the difference between the TX210 and the TX220?\u003c\/dt\u003e\n\u003cdd\u003eBoth units extend HDMI over HDBaseT with a local monitor output. The TX220 is a slightly higher-specification model in the TPS family. The TX210 is the entry-level transmitter suited for standard HD and 4K installations where remote power delivery is not required.\u003c\/dd\u003e\n\u003cdt\u003eDoes the local HDMI output stay active if there is no TPS receiver connected?\u003c\/dt\u003e\n\u003cdd\u003eYes. The local monitor output mirrors the source input continuously and is not dependent on TPS link status.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable type is needed for 100-meter transmission?\u003c\/dt\u003e\n\u003cdd\u003eShielded CAT6 or CAT7 is required. Unshielded cable is not recommended and will reduce reliable operating distance.\u003c\/dd\u003e\n\u003cdt\u003eIs the TX210 compatible with third-party HDBaseT receivers?\u003c\/dt\u003e\n\u003cdd\u003eThe TX210 follows the HDBaseT standard and can interoperate with other compliant receivers. Full LW3 diagnostic and control features require a paired Lightware TPS receiver.\u003c\/dd\u003e\n\u003cdt\u003eCan the RS-232 port be used for control system integration?\u003c\/dt\u003e\n\u003cdd\u003eYes. The RS-232 port supports bidirectional pass-through. Lightware provides control drivers for Crestron, AMX, Extron, and other platforms using LW3 over Ethernet or direct serial.\u003c\/dd\u003e\n\u003cdt\u003eWhat HDMI sources are compatible?\u003c\/dt\u003e\n\u003cdd\u003eAny standard HDMI source is compatible, including laptops, desktop PCs, Blu-ray players, streaming devices, and video conferencing systems.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the HDMI-TPS-TX210?\u003c\/dt\u003e\n\u003cdd\u003eThe HDMI-TPS-TX210 is available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware dealer in North America.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974330646764,"sku":"91540017","price":1732.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx210-tps-hdbasettm-extender-for-hdmi-with-local-monitor-out-91540017-creation-networks-68779.jpg?v=1757925296"},{"product_id":"lightware-dp-tps-tx210-tps-hdbaset™-displayport-extender-with-local-monitor-out-91540019","title":"Lightware DP-TPS-TX210 TPS (HDBaseT™) DisplayPort Extender with Local Monitor Out -  91540019","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware DP-TPS-TX210 is an HDBaseT transmitter for DisplayPort sources that extends DP signals up to 100 meters over a single shielded CAT6\/7 cable with a local DisplayPort monitor output for presenter confidence monitoring. Designed for corporate boardrooms, engineering workstations, and visualization facilities where DisplayPort is the native source interface, the DP-TPS-TX210 eliminates the need for HDMI adapters or format converters at the source device. RS-232 and IR pass-through enable full control system integration with standard AV automation platforms.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eDisplayPort is the native video output on most modern workstations, laptops with discrete GPUs, and high-resolution displays — yet the majority of HDBaseT extenders require an HDMI source. The DP-TPS-TX210 resolves this directly by accepting a DisplayPort input and transmitting it natively over HDBaseT, preserving signal quality and eliminating the adapter chain that introduces compatibility issues and signal degradation in professional installations.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-dp-tps-tx210-tps-hdbasettm-displayport-extender-with-local-monitor-out-91540019-creation-networks-58477.jpg?v=1757925297\" alt=\"Lightware DP-TPS-TX210 DisplayPort HDBaseT Extender\"\u003e\u003c\/p\u003e\u003cp\u003eThe local DisplayPort monitor output allows the source signal to be simultaneously displayed at the transmitter location — useful for presenter stations, podiums, or engineering desks where the operator needs a local view of the content being sent to a remote display. RS-232 and IR pass-through support bidirectional control integration, and the unit communicates with control systems via Lightware's LW3 Ethernet protocol for full status and configuration management.\u003c\/p\u003e\u003cp\u003eThe DP-TPS-TX210 is available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware dealer providing commercial AV solutions across North America.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNative DisplayPort input\u003c\/strong\u003e — accepts DP source directly without requiring HDMI adapters or conversion hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT transmission up to 100m\u003c\/strong\u003e — extends DisplayPort over a single shielded CAT6\/7 cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocal DisplayPort monitor output\u003c\/strong\u003e — provides a simultaneous confidence monitor feed at the transmitter end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBidirectional RS-232 pass-through\u003c\/strong\u003e — routes serial commands between the control system and far-end display or source\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR pass-through\u003c\/strong\u003e — enables IR remote control of devices at the far end via the TPS cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLW3 protocol control\u003c\/strong\u003e — Lightware's open Ethernet-based API for configuration and status monitoring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP compliant\u003c\/strong\u003e — handles protected content over the DisplayPort and TPS links\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Lightware TPS receivers\u003c\/strong\u003e — pairs with the TPS receiver family for guaranteed interoperability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEngineering and design workstations with native DisplayPort outputs requiring signal extension to wall-mounted displays\u003c\/li\u003e\n\u003cli\u003eBoardrooms and executive conference rooms where desktop workstations connect via DisplayPort to far-end displays\u003c\/li\u003e\n\u003cli\u003eTraining rooms with instructor workstations using DisplayPort and displays distributed over CAT infrastructure\u003c\/li\u003e\n\u003cli\u003eVisualization and simulation facilities requiring native DP signal extension without format conversion\u003c\/li\u003e\n\u003cli\u003eHuddle rooms with DisplayPort-equipped all-in-one PCs or workstations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003e1x DisplayPort (DP 1.1\/1.2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Output\u003c\/td\u003e\n\u003ctd\u003e1x RJ-45 (HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Monitor Output\u003c\/td\u003e\n\u003ctd\u003e1x DisplayPort loop-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p@60Hz; 4K supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e100m over shielded CAT6\/7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232 (bidirectional), IR, LW3 (Ethernet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eExternal PSU included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware DP-TPS-TX210\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNative Input Format\u003c\/td\u003e\n\u003ctd\u003eDisplayPort\u003c\/td\u003e\n\u003ctd\u003eHDMI only\u003c\/td\u003e\n\u003ctd\u003eHDMI only\u003c\/td\u003e\n\u003ctd\u003eHDMI only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter Required for DP Source\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes (DP to HDMI)\u003c\/td\u003e\n\u003ctd\u003eYes (DP to HDMI)\u003c\/td\u003e\n\u003ctd\u003eYes (DP to HDMI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100m CAT6\/7\u003c\/td\u003e\n\u003ctd\u003e90m CAT6A\u003c\/td\u003e\n\u003ctd\u003e70m CAT6\u003c\/td\u003e\n\u003ctd\u003e100m CAT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Monitor Output\u003c\/td\u003e\n\u003ctd\u003eYes, DisplayPort loop-out\u003c\/td\u003e\n\u003ctd\u003eNo TX loop-out\u003c\/td\u003e\n\u003ctd\u003eYes (HDMI)\u003c\/td\u003e\n\u003ctd\u003eYes (HDMI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW3, RS-232, IR\u003c\/td\u003e\n\u003ctd\u003eCrestron proprietary\u003c\/td\u003e\n\u003ctd\u003eSIS, RS-232\u003c\/td\u003e\n\u003ctd\u003eRS-232, IP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen API\u003c\/td\u003e\n\u003ctd\u003eYes (LW3)\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eCompact\u003c\/td\u003e\n\u003ctd\u003eSmall chassis\u003c\/td\u003e\n\u003ctd\u003eHalf-rack 1U\u003c\/td\u003e\n\u003ctd\u003eHalf-rack 1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhy use the DP-TPS-TX210 instead of a DisplayPort-to-HDMI adapter with an HDMI extender?\u003c\/dt\u003e\n\u003cdd\u003eActive DP-to-HDMI adapters introduce an additional conversion stage that can cause EDID negotiation failures, HDCP handshake issues, and resolution mismatches. The DP-TPS-TX210 accepts DisplayPort natively, eliminating this layer of complexity and potential failure points.\u003c\/dd\u003e\n\u003cdt\u003eWhat DisplayPort versions are supported on the input?\u003c\/dt\u003e\n\u003cdd\u003eThe unit supports DisplayPort 1.1 and 1.2 sources. Multi-Stream Transport (MST) daisy-chaining is not supported; a single direct DisplayPort connection from the source is required.\u003c\/dd\u003e\n\u003cdt\u003eDoes the local monitor output stay active when the TPS link is in use?\u003c\/dt\u003e\n\u003cdd\u003eYes. The local DisplayPort monitor output is continuously active regardless of TPS link state.\u003c\/dd\u003e\n\u003cdt\u003eCan the DP-TPS-TX210 pair with any HDBaseT receiver?\u003c\/dt\u003e\n\u003cdd\u003eThe unit follows the HDBaseT standard and will operate with other compliant receivers. For full feature support including LW3 control and diagnostics, a Lightware TPS receiver is recommended.\u003c\/dd\u003e\n\u003cdt\u003eIs RS-232 control bidirectional?\u003c\/dt\u003e\n\u003cdd\u003eYes. RS-232 pass-through operates bidirectionally, supporting control system commands routed to a display at the far end and status responses returned to the control system.\u003c\/dd\u003e\n\u003cdt\u003eWhat resolution is supported over 100 meters?\u003c\/dt\u003e\n\u003cdd\u003e1080p@60Hz is the standard operating resolution for full 100-meter range. Higher resolutions may be supported at shorter cable runs.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the DP-TPS-TX210?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware dealer in North America.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974334611692,"sku":"91540019","price":1732.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-dp-tps-tx210-tps-hdbasettm-displayport-extender-with-local-monitor-out-91540019-creation-networks-58477.jpg?v=1757925297"},{"product_id":"lightware-hdmi-tps-tx220-tps-hdbaset-extender-for-hdmi-with-local-monitor-out","title":"Lightware HDMI-TPS-TX220 TPS (HDBaseT) extender for HDMI with local monitor out - 91540011","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPS-TX220 is an HDBaseT transmitter that extends HDMI signals up to 100 meters over a single CAT6\/7 cable while providing a local HDMI monitor output at the transmitter location. Targeted at corporate AV installations, boardrooms, and education facilities, the TX220 supports 1080p and standard 4K resolutions over HDBaseT with bidirectional RS-232 and IR control pass-through. The local loop-out makes it well-suited for podium and lectern installations where the presenter needs a confidence monitor independent of the far-end display.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe HDMI-TPS-TX220 follows the HDBaseT standard to transmit HDMI video, embedded audio, RS-232, and IR over a single shielded CAT cable to a compatible receiver up to 100 meters away. Unlike TPS extenders with remote power output, the TX220 is optimized as a pure signal transmission device — making it a cost-effective choice when the receiver is locally powered and remote power delivery is not required.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx220-tps-hdbaset-extender-for-hdmi-with-local-monitor-out-91540011-creation-networks-40836.jpg?v=1757925298\" alt=\"Lightware HDMI-TPS-TX220 front and rear view\"\u003e\u003c\/p\u003e\u003cp\u003eThe local monitor output mirrors the source signal continuously regardless of TPS link state, allowing a presenter to verify content before it appears on the far-end display. RS-232 and IR pass-through support bidirectional control, enabling display power, volume, and input control to be routed back through the transmitter from a control system located at the source. The TX220 is managed via Lightware's LW3 protocol over Ethernet and integrates with standard AV control platforms.\u003c\/p\u003e\u003cp\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware distributor serving commercial AV integrators in North America.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT transmission up to 100m\u003c\/strong\u003e — extends HDMI over a single CAT6\/7 cable with full signal integrity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocal HDMI monitor output\u003c\/strong\u003e — provides a continuous confidence monitor feed at the transmitter location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1080p and 4K support\u003c\/strong\u003e — handles standard HD and UHD source resolutions over the HDBaseT link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBidirectional RS-232 pass-through\u003c\/strong\u003e — routes serial control commands between the control system and the far-end display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR pass-through\u003c\/strong\u003e — enables remote IR control of source or display devices via the TPS cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP compliant\u003c\/strong\u003e — supports copy-protected content from Blu-ray, streaming, and corporate video sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLW3 protocol control\u003c\/strong\u003e — Lightware's open IP-based protocol for status monitoring and configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact form factor\u003c\/strong\u003e — fits in standard AV racks or can be table- or wall-mounted in AV furniture\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardrooms where the source rack is 30–100 meters from the display wall\u003c\/li\u003e\n\u003cli\u003ePodium and lectern installations requiring a local confidence monitor for the presenter\u003c\/li\u003e\n\u003cli\u003eConference rooms using a control system to manage display power and input selection via RS-232\u003c\/li\u003e\n\u003cli\u003eTraining rooms where HDMI sources are centralized and distributed to room displays over CAT infrastructure\u003c\/li\u003e\n\u003cli\u003eHuddle rooms with simple HDMI-to-display extension over existing CAT cabling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003e1x HDMI (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Output\u003c\/td\u003e\n\u003ctd\u003e1x RJ-45 (HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Monitor Output\u003c\/td\u003e\n\u003ctd\u003e1x HDMI (Type A) loop-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p@60Hz (4:4:4); 4K supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e100m over shielded CAT6\/7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232 (bidirectional), IR, LW3 (Ethernet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power Output\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eExternal PSU included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPS-TX220\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100m CAT6\/7\u003c\/td\u003e\n\u003ctd\u003e90m CAT6A\u003c\/td\u003e\n\u003ctd\u003e70m CAT6\u003c\/td\u003e\n\u003ctd\u003e100m CAT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Monitor Output\u003c\/td\u003e\n\u003ctd\u003eYes, HDMI loop-out\u003c\/td\u003e\n\u003ctd\u003eNo (receiver-side only)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power Output\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003eN\/A (receiver unit)\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003ctd\u003eNot available on TX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW3, RS-232, IR\u003c\/td\u003e\n\u003ctd\u003eCrestron proprietary\u003c\/td\u003e\n\u003ctd\u003eSIS, RS-232\u003c\/td\u003e\n\u003ctd\u003eRS-232, IP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen API\u003c\/td\u003e\n\u003ctd\u003eYes (LW3)\u003c\/td\u003e\n\u003ctd\u003eLimited to Crestron\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eCompact tabletop\/rack\u003c\/td\u003e\n\u003ctd\u003eSmall wall\/rack\u003c\/td\u003e\n\u003ctd\u003eHalf-rack 1U\u003c\/td\u003e\n\u003ctd\u003eHalf-rack 1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice Tier\u003c\/td\u003e\n\u003ctd\u003eMid-range\u003c\/td\u003e\n\u003ctd\u003eHigher (Crestron ecosystem)\u003c\/td\u003e\n\u003ctd\u003eMid-range\u003c\/td\u003e\n\u003ctd\u003eMid-range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat is the difference between the TX220 and the TX226?\u003c\/dt\u003e\n\u003cdd\u003eThe TX220 is a standard HDBaseT transmitter without remote power output. The TX226 adds the ability to deliver 12V DC power to a compatible receiver over the same TPS cable, which is useful when a local power supply at the receiver end is impractical.\u003c\/dd\u003e\n\u003cdt\u003eDoes the local monitor output stay active if the TPS link is disconnected?\u003c\/dt\u003e\n\u003cdd\u003eYes. The local HDMI loop-out is always active and mirrors the source input regardless of TPS link status.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable is needed for 100-meter transmission?\u003c\/dt\u003e\n\u003cdd\u003eShielded CAT6 or CAT7 cable is required for full 100-meter performance. Unshielded cable may reduce reliable range.\u003c\/dd\u003e\n\u003cdt\u003eIs the TX220 compatible with non-Lightware HDBaseT receivers?\u003c\/dt\u003e\n\u003cdd\u003eThe TX220 follows the HDBaseT standard and will interoperate with other HDBaseT-certified receivers. However, features such as LW3 control and extended diagnostics require a paired Lightware TPS receiver.\u003c\/dd\u003e\n\u003cdt\u003eCan RS-232 control pass-through in both directions?\u003c\/dt\u003e\n\u003cdd\u003eYes. The RS-232 pass-through is bidirectional, allowing commands from a control system at the source end to reach a display at the receiver end, and vice versa.\u003c\/dd\u003e\n\u003cdt\u003eWhat control systems are compatible?\u003c\/dt\u003e\n\u003cdd\u003eThe TX220 supports LW3 over Ethernet and RS-232. Drivers are available for Crestron, AMX, Extron, and other major control platforms.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I buy the HDMI-TPS-TX220?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware dealer serving North America.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974338838764,"sku":"91540011","price":1732.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx220-tps-hdbaset-extender-for-hdmi-with-local-monitor-out-91540011-creation-networks-40836.jpg?v=1757925298"},{"product_id":"lightware-hdmi-tps-tx226-tps-extender-with-dc-12v-remote-power","title":"Lightware HDMI-TPS-TX226 TPS Extender with DC 12V Remote Power - 91540080","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPS-TX226 is a professional HDBaseT transmitter that extends HDMI signals up to 100 meters over a single CAT cable while simultaneously delivering DC 12V remote power to connected devices. Designed for fixed AV installations in corporate, government, and education environments, the TX226 supports 4K UHD resolution with HDCP 2.2 compliance. It is the preferred transmitter for integrators who need to power a remote receiver or camera without running a separate power line, reducing cable infrastructure costs in boardrooms and conference centers.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe HDMI-TPS-TX226 transmits HDMI 2.0 signals with support for resolutions up to 4K@60Hz (4:2:0) over a single shielded CAT6\/7 cable, eliminating the need for bulky HDMI cable runs across large rooms or through conduit. The unit conforms to the HDBaseT 2.0 standard and carries HDMI, embedded audio, control signals, and 12V DC power simultaneously over one cable — a critical advantage in retrofit installations where conduit space is at a premium.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx226-tps-extender-with-dc-12v-remote-power-91540080-creation-networks-63139.png?v=1757925299\" alt=\"Lightware HDMI-TPS-TX226 front panel\"\u003e\u003c\/p\u003e\u003cp\u003eThe TX226 includes a local HDMI loop-out port, allowing the source signal to be monitored at the transmitter location — useful for presenter confidence monitors at a podium. RS-232 and IR pass-through enable full control system integration with Crestron, Extron, and AMX platforms. The unit is housed in a compact half-rack chassis suitable for rack-mounting or surface installation in AV furniture.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx226-tps-extender-with-dc-12v-remote-power-91540080-creation-networks-28039.png?v=1757925299\" alt=\"Lightware HDMI-TPS-TX226 rear connectors\"\u003e\u003c\/p\u003e\u003cp\u003eLightware's LW3 protocol provides deep control integration, and the device can be managed via the Lightware Device Controller software. The TX226 is sold and supported in North America by \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, your authorized Lightware dealer.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT 2.0 transmission\u003c\/strong\u003e — extends HDMI up to 100m over CAT6\/7 with full HDCP 2.2 support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC 12V remote power output\u003c\/strong\u003e — powers a compatible receiver or PTZ camera over the same CAT cable, eliminating a separate power run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K UHD support\u003c\/strong\u003e — handles resolutions up to 4K@60Hz (4:2:0) and 1080p@60Hz (4:4:4)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocal HDMI loop-out\u003c\/strong\u003e — feeds a confidence monitor at the transmitter end with no signal degradation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBidirectional RS-232 \u0026amp; IR\u003c\/strong\u003e — full control system pass-through for Crestron, AMX, Extron, and other platforms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded audio support\u003c\/strong\u003e — passes PCM, Dolby TrueHD, and DTS-HD Master Audio without external de-embedding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 2.2 compliant\u003c\/strong\u003e — handles protected content from Blu-ray, streaming devices, and corporate video sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact half-rack form factor\u003c\/strong\u003e — fits in standard AV racks or can be surface-mounted under tables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLW3 protocol control\u003c\/strong\u003e — deep status reporting and control via Lightware Device Controller or third-party control systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCorporate boardrooms requiring HDMI extension from a rack-mounted AV system to a far-end display\u003c\/li\u003e\n\u003cli\u003eConference rooms with in-table connectivity boxes where a separate power run to the table is impractical\u003c\/li\u003e\n\u003cli\u003eTraining rooms and classrooms where a podium source must be extended to multiple display zones\u003c\/li\u003e\n\u003cli\u003eHuddle rooms using PTZ cameras powered over the same CAT cable as the video signal\u003c\/li\u003e\n\u003cli\u003eGovernment and secure facilities requiring HDCP 2.2-compliant signal distribution\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003e1x HDMI 2.0 (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Output (TPS)\u003c\/td\u003e\n\u003ctd\u003e1x RJ-45 (HDBaseT 2.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Monitor Output\u003c\/td\u003e\n\u003ctd\u003e1x HDMI 2.0 (Type A) loop-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Resolution\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz (4:2:0), 1080p@60Hz (4:4:4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e100m over CAT6\/7 (shielded)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power Output\u003c\/td\u003e\n\u003ctd\u003e12V DC, up to 18W over TPS cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, LW3 protocol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eExternal PSU included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eHalf-rack width, 1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPS-TX226\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz (4:2:0)\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz (4:4:4)\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz (4:2:0)\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz (4:2:0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100m CAT6\/7\u003c\/td\u003e\n\u003ctd\u003e90m CAT6A\u003c\/td\u003e\n\u003ctd\u003e70m CAT6\u003c\/td\u003e\n\u003ctd\u003e100m CAT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power Output\u003c\/td\u003e\n\u003ctd\u003e12V DC over TPS cable\u003c\/td\u003e\n\u003ctd\u003eNot available on TX unit\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003ctd\u003eNot available on TX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Loop-Out\u003c\/td\u003e\n\u003ctd\u003eYes, HDMI 2.0\u003c\/td\u003e\n\u003ctd\u003eNo transmitter loop-out\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW3, RS-232, IR\u003c\/td\u003e\n\u003ctd\u003eCrestron proprietary\u003c\/td\u003e\n\u003ctd\u003eSIS, RS-232\u003c\/td\u003e\n\u003ctd\u003eRS-232, IP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eHalf-rack 1U\u003c\/td\u003e\n\u003ctd\u003eSmall wall\/rack\u003c\/td\u003e\n\u003ctd\u003eHalf-rack 1U\u003c\/td\u003e\n\u003ctd\u003eHalf-rack 1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen API\u003c\/td\u003e\n\u003ctd\u003eYes (LW3)\u003c\/td\u003e\n\u003ctd\u003eLimited to Crestron ecosystem\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat cable type is required for 100-meter transmission?\u003c\/dt\u003e\n\u003cdd\u003eShielded CAT6 or CAT7 is required to achieve the full 100-meter range with 4K signal integrity. Unshielded cable will reduce maximum reliable distance.\u003c\/dd\u003e\n\u003cdt\u003eCan the TX226 power a receiver at the far end?\u003c\/dt\u003e\n\u003cdd\u003eYes. The unit outputs 12V DC at up to 18W over the TPS cable, sufficient to power compatible Lightware HDBaseT receivers without a local power supply at the display end.\u003c\/dd\u003e\n\u003cdt\u003eDoes the TX226 work with any HDBaseT receiver?\u003c\/dt\u003e\n\u003cdd\u003eThe TX226 is optimized for use with Lightware TPS receivers. While it follows the HDBaseT standard, Lightware recommends pairing with their own receivers for guaranteed 4K performance and full remote power delivery.\u003c\/dd\u003e\n\u003cdt\u003eIs the local loop-out active when the TPS output is connected?\u003c\/dt\u003e\n\u003cdd\u003eYes. The local HDMI loop-out is always active regardless of TPS link status, making it suitable for permanent confidence monitor connections.\u003c\/dd\u003e\n\u003cdt\u003eWhat control systems are compatible?\u003c\/dt\u003e\n\u003cdd\u003eThe TX226 supports RS-232, IR, and Lightware's LW3 Ethernet protocol. Drivers are available for Crestron, AMX, Extron, and Savant control systems.\u003c\/dd\u003e\n\u003cdt\u003eIs HDCP 2.2 supported end-to-end?\u003c\/dt\u003e\n\u003cdd\u003eYes, provided the paired receiver also supports HDCP 2.2. The entire chain — source, transmitter, cable, and receiver — must be HDCP 2.2 compliant for protected 4K content.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the HDMI-TPS-TX226 in North America?\u003c\/dt\u003e\n\u003cdd\u003eThe TX226 is available directly from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware dealer serving commercial AV integrators across North America.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974344605932,"sku":"91540080","price":1749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-tx226-tps-extender-with-dc-12v-remote-power-91540080-creation-networks-63139.png?v=1757925299"},{"product_id":"lightware-sw4-tps-tx240-tps-hdbaset™-switcher-and-transmitter-for-displayport-hdmi-and-dvi-with-local-monitor-out","title":"Lightware SW4-TPS-TX240 TPS (HDBaseT™) switcher and transmitter for DisplayPort, HDMI and DVI with local monitor out - 91540007","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware SW4-TPS-TX240 is a 4-input HDBaseT switcher and transmitter that accepts DisplayPort, HDMI, and DVI sources, selects the active input, and transmits the signal over a single CATx cable using the TPS protocol. It includes a local HDMI monitor output for on-site display or confidence monitoring at the equipment location. Designed for conference rooms, training facilities, and small auditoriums where multiple source types and a local monitor output are required alongside remote display extension.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe SW4-TPS-TX240 addresses installations where multiple source types — including DisplayPort from workstations, HDMI from laptops, and DVI from legacy equipment — need to be switched and extended to a remote display over existing CATx infrastructure. The 4-input matrix handles source selection, and the selected signal is output both to the local HDMI monitor port and transmitted over TPS (HDBaseT-compatible) to the connected TPS receiver at the display location.\u003c\/p\u003e\u003cp\u003eThe local monitor output allows a presenter or operator to verify the signal being sent to the remote display, which is useful in broadcast-style setups, faculty podiums, and AV production environments. The unit supports HDCP for content protection compliance. RS-232 and IR signals pass through the TPS link for remote display control. EDID management is applied at each input to ensure reliable handshaking with connected source devices. The LW3 control protocol enables integration with all major third-party control systems including Crestron, AMX, and Extron, and Lightware's Device Manager software allows configuration and monitoring over IP.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-sw4-tps-tx240-tps-hdbasettm-switcher-and-transmitter-for-displayport-hdmi-and-dvi-with-local-monitor-out-91540007-creation-networks-67920.jpg?v=1757925300\" alt=\"Lightware SW4-TPS-TX240 4-input TPS switcher and transmitter\"\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Input Switching\u003c\/strong\u003e — Accepts DisplayPort, HDMI, and DVI sources for selection and distribution without a separate switcher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPS Transmission\u003c\/strong\u003e — Sends selected source over a single CATx cable (Cat5e \/ Cat6) to a remote TPS receiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocal HDMI Monitor Output\u003c\/strong\u003e — Provides a dedicated HDMI output at the unit for on-site confidence monitoring or secondary display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT Compatible\u003c\/strong\u003e — Uses structured CATx cabling infrastructure found in virtually all commercial buildings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP Compliant\u003c\/strong\u003e — Supports protected content distribution for Blu-ray, streaming, and secure presentation workflows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Extension\u003c\/strong\u003e — Passes control signals to the remote display via the TPS link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDID Management per Input\u003c\/strong\u003e — Stable EDID emulation on each input prevents plug-and-display handshake issues\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLW3 Protocol Support\u003c\/strong\u003e — IP-based open control protocol integrates with Crestron, AMX, Extron, and other systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Format Input Support\u003c\/strong\u003e — Accepts DisplayPort, HDMI, and DVI in a single unit, eliminating the need for separate format converters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms with mixed-source connections (laptop HDMI, workstation DisplayPort, legacy DVI)\u003c\/li\u003e\n\u003cli\u003eFaculty podiums and instructor stations in higher education requiring local and room display simultaneously\u003c\/li\u003e\n\u003cli\u003eSmall auditoriums and lecture theaters with front-of-house and operator position monitoring\u003c\/li\u003e\n\u003cli\u003eBoardrooms requiring multi-format presenter connectivity with local operator preview\u003c\/li\u003e\n\u003cli\u003eTraining rooms where an instructor monitor is needed alongside the main room display\u003c\/li\u003e\n\u003cli\u003eProduction and broadcast environments with mixed-format sources and confidence monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Inputs\u003c\/td\u003e\n\u003ctd\u003e4 (DisplayPort, HDMI, DVI — mixed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e1x TPS (CATx), 1x HDMI local monitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLink Type\u003c\/td\u003e\n\u003ctd\u003eLightware TPS (HDBaseT-compatible) over CATx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eCat5e \/ Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003ePer-input programmable emulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Monitor Output\u003c\/td\u003e\n\u003ctd\u003eHDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware SW4-TPS-TX240\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Count\u003c\/td\u003e\n\u003ctd\u003e4 inputs (DP, HDMI, DVI) — built-in switching\u003c\/td\u003e\n\u003ctd\u003eSingle-input receiver unit; switching requires separate switcher\u003c\/td\u003e\n\u003ctd\u003eSingle-input TX; switching requires separate switcher\u003c\/td\u003e\n\u003ctd\u003eSingle-input receiver; switching requires separate switcher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal Monitor Output\u003c\/td\u003e\n\u003ctd\u003eYes — dedicated HDMI monitor out at unit\u003c\/td\u003e\n\u003ctd\u003eNo local output (receiver function only)\u003c\/td\u003e\n\u003ctd\u003eSome TX models include local out\u003c\/td\u003e\n\u003ctd\u003eNo local monitor output on RX units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Formats\u003c\/td\u003e\n\u003ctd\u003eDisplayPort, HDMI, DVI\u003c\/td\u003e\n\u003ctd\u003eHDMI only\u003c\/td\u003e\n\u003ctd\u003eHDMI only on standard TX\u003c\/td\u003e\n\u003ctd\u003eHDMI only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT Compatible\u003c\/td\u003e\n\u003ctd\u003eYes — TPS over CATx\u003c\/td\u003e\n\u003ctd\u003eYes — DM over CATx (proprietary Crestron)\u003c\/td\u003e\n\u003ctd\u003eYes — DTP over CATx\u003c\/td\u003e\n\u003ctd\u003eYes — HDBaseT over CATx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eLW3 open protocol; any control system\u003c\/td\u003e\n\u003ctd\u003eCrestron-centric; third-party limited\u003c\/td\u003e\n\u003ctd\u003eSIS; broad third-party support\u003c\/td\u003e\n\u003ctd\u003eRS-232\/IP; broad support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003ePer-input programmable via LW3\u003c\/td\u003e\n\u003ctd\u003eVia Crestron toolbox\u003c\/td\u003e\n\u003ctd\u003eVia Extron SMP\u003c\/td\u003e\n\u003ctd\u003eVia Kramer K-Upload\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse Case Fit\u003c\/td\u003e\n\u003ctd\u003ePresenter podium with mixed sources and local monitor\u003c\/td\u003e\n\u003ctd\u003eEnd-point display connection in Crestron system\u003c\/td\u003e\n\u003ctd\u003eEnd-point TX in Extron DTP system\u003c\/td\u003e\n\u003ctd\u003eEnd-point RX in Kramer system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat input types does the SW4-TPS-TX240 accept?\u003c\/dt\u003e\n\u003cdd\u003eThe unit accepts DisplayPort, HDMI, and DVI inputs across its four input ports. This multi-format capability is specifically useful in environments with mixed presenter devices — for example, a Windows workstation on DisplayPort, a MacBook on HDMI via adapter, and a legacy DVI source from a document camera or older PC.\u003c\/dd\u003e\n\u003cdt\u003eWhat does the local HDMI monitor output do?\u003c\/dt\u003e\n\u003cdd\u003eThe local monitor output provides a mirrored HDMI signal at the unit itself, independent of the TPS transmission. This allows the presenter, instructor, or operator at the equipment location to see what is being sent to the remote display, useful for podiums, production desks, and confidence monitoring positions.\u003c\/dd\u003e\n\u003cdt\u003eDoes the unit require a separate switcher?\u003c\/dt\u003e\n\u003cdd\u003eNo. Input selection is built into the SW4-TPS-TX240. The four inputs are switched internally, so no external video switcher is required. Switching can be controlled via front-panel buttons, RS-232, or IP control.\u003c\/dd\u003e\n\u003cdt\u003eWhat receiver is compatible with the TPS output of the SW4-TPS-TX240?\u003c\/dt\u003e\n\u003cdd\u003eAny Lightware TPS-compatible receiver in the supported product family is compatible. Consult Lightware's compatibility documentation or contact Creation Networks to confirm the best pairing receiver for your installation.\u003c\/dd\u003e\n\u003cdt\u003eCan the switching be automated via a control system?\u003c\/dt\u003e\n\u003cdd\u003eYes. The LW3 protocol allows a control system to send input selection commands over IP or RS-232. This enables automatic source switching triggered by sensor detection, calendar scheduling, or button panel inputs.\u003c\/dd\u003e\n\u003cdt\u003eIs there any compression involved in the TPS transmission?\u003c\/dt\u003e\n\u003cdd\u003eThe TPS link uses proprietary Lightware encoding designed for transparency. Signal fidelity is maintained for standard commercial AV resolutions. For lossless uncompressed requirements in broadcast or production workflows, consider Lightware's fiber-based SDVoE products instead.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the SW4-TPS-TX240?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller providing commercial AV integration, system design, and project support.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974355615980,"sku":"91540007","price":1963.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-sw4-tps-tx240-tps-hdbasettm-switcher-and-transmitter-for-displayport-hdmi-and-dvi-with-local-monitor-out-91540007-creation-networks-67920.jpg?v=1757925300"},{"product_id":"lightware-sw4-tps-tx240-plus-tps-hdbaset™-switcher-and-transmitter-for-displayport-hdmi-and-dvi-with-local-monitor-out-91540065","title":"Lightware SW4-TPS-TX240-Plus TPS (HDBaseT™) switcher and transmitter for DisplayPort, HDMI and DVI with local monitor out -  91540065","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware SW4-TPS-TX240-Plus is a four-input HDBaseT switcher and transmitter designed for commercial AV installations where multiple video sources must be distributed over structured cabling. It extends HDMI 1.4, DisplayPort 1.1, and DVI signals together with audio, Ethernet, RS-232, and IR control over a single CAT5e or better cable to distances up to 170 meters. The unit is cross-compatible with Lightware's TPS extender and matrix switcher ecosystem, making it a practical choice for conference rooms, classrooms, and control rooms. The \"+\" designation adds the Advanced Control Pack, including 100 event slots in the built-in Event Manager and native Cisco videoconferencing room integration.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe SW4-TPS-TX240-Plus handles uncompressed video up to 9 Gbps (300 MHz pixel clock) with zero frame delay, supporting resolutions up to 4K UHD at 30Hz or 1080p at 120Hz. Four inputs — HDMI, DVI-D, DisplayPort, and a 3.5mm analog audio jack — are routed through a built-in 4:1 crosspoint switcher with front-panel pushbutton control. A local HDMI output mirrors the transmitted signal, providing a confidence monitor feed at the source end. Advanced EDID Management stores 120 factory presets and 15 user-programmable profiles, ensuring source-display compatibility without manual intervention.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-sw4-tps-tx240-plus-tps-hdbasettm-switcher-and-transmitter-for-displayport-hdmi-and-dvi-with-local-monitor-out-91540065-creation-networks-36698.jpg?v=1757925301\" alt=\"Lightware SW4-TPS-TX240-Plus HDBaseT Switcher Transmitter\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe TPS link supports Power over TPS (DC 48V, 1A) so the paired receiver can be powered from the transmitter end, reducing the need for local power at the display. Bi-directional RS-232 and IR pass-through with command injection allow control of displays and third-party devices from the head end. The built-in Event Manager automates room actions — input switching on source detection, display power-on via CEC or IR, and RS-232 commands to VC codecs — without requiring an external control processor.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-input switcher with local HDMI output\u003c\/strong\u003e — routes HDMI 1.4, DP 1.1, DVI-D, and analog audio; local mirror output for source-side monitoring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e170 m extension over single CAT5e\/6\/7\u003c\/strong\u003e — extends video, audio, Ethernet, RS-232, and IR over one cable run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero frame delay, no compression\u003c\/strong\u003e — uncompressed video at up to 9 Gbps; pixel-accurate reclocking eliminates jitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K UHD support\u003c\/strong\u003e — 3840x2160@30Hz or 4096x2160@30Hz; 1920x1080@120Hz in 4:4:4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced EDID Management\u003c\/strong\u003e — 120 factory presets, 15 user slots; forces correct resolution from any source\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 1.4 compliant\u003c\/strong\u003e — per-input HDCP enable\/disable; pass-through to TPS link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower over TPS\u003c\/strong\u003e — remotely powers compatible receiver over the CAT cable (48V, 1A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Event Manager (Plus)\u003c\/strong\u003e — 100 event slots; automates switching, display control, VC codec integration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCisco VC room integration\u003c\/strong\u003e — RS-232\/USB command injection for Cisco Room Kit and compatible codecs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCEC command send\/receive\u003c\/strong\u003e — controls HDMI displays and responds to display CEC commands\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-directional RS-232 and IR\u003c\/strong\u003e — pass-through and command injection over the TPS link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet extension (100 Mbps)\u003c\/strong\u003e — extends LAN connectivity to the display end over the same CAT cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardrooms and executive conference rooms with mixed-source AV (laptop HDMI\/DP, in-room PC, videoconferencing codec)\u003c\/li\u003e\n\u003cli\u003eUniversity lecture theaters and classrooms requiring long cable runs to ceiling-mounted projectors\u003c\/li\u003e\n\u003cli\u003eGovernment and corporate control rooms with centralized AV switching and display wall control\u003c\/li\u003e\n\u003cli\u003eHuddle spaces and training rooms where PoTPS eliminates the need for a receiver-side power outlet\u003c\/li\u003e\n\u003cli\u003eHouses of worship and auditoriums with existing CAT cabling infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eParameter\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eMax resolution (60Hz)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e1600x1200@60Hz; 1920x1080@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eMax resolution (30Hz)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e3840x2160@30Hz; 4096x2160@30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eMax resolution (120Hz)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e1920x1080@120Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eVideo bandwidth\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e300 MHz pixel clock, 9 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eDigital inputs\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDMI (Type A), DVI-D, DisplayPort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eAnalog audio input\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e3.5mm stereo jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eLocal video output\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e1x HDMI (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eTPS output\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e1x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eEthernet\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e1x RJ45, 100 Mbps extension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eSerial port\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e3-pole Phoenix, 9600–115200 Baud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eGPIO\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e8-pole Phoenix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eIR\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e3.5mm jack (bi-directional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eEDID memory\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e120 factory presets, 15 user programmable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDCP\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDCP 1.4 compliant; per-input enable\/disable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eAudio formats\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eUp to 8-ch PCM, Dolby TrueHD, DTS-HD MA 7.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eExtension distance (1080p)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eUp to 170m (CAT7 AWG23, long-reach mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eExtension distance (4K)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eUp to 100m (CAT7 AWG23)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePower over TPS\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eDC 48V, 1A (powers receiver)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eLocal power supply\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eUniversal adaptor, DC 12V 2.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePower consumption\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e8.5W typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e221 W x 100.4 D x 26 H mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e1mm metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eCompliance\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eCriteria\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eLightware SW4-TPS-TX240-Plus\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eExtron DTP HD 4K 330\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eMax extension distance\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e170m (1080p, LR mode, CAT7 AWG23)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e100m (4K), 150m (1080p)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e100m (4K30), 330ft copper\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e70m (4K30), 130m (1080p)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eMax resolution\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e4K UHD@30Hz; 1080p@120Hz\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e4K60 4:4:4 (HDBaseT 2.0)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e4K30 (HDBT 1.0 class)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e4K30 HDR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eBuilt-in switcher\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eYes, 4 inputs (HDMI, DVI, DP, audio)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eNo — receiver only\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eNo — transmitter\/receiver only\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eNo — receiver only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eControl automation\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eBuilt-in Event Manager, 100 slots, CEC send\/receive\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eRequires Crestron control system\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eSIS commands via RS-232\/Ethernet; no onboard automation\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eLimited — no built-in automation engine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eVC codec integration\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eCisco Room Kit RS-232\/USB native support\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eVia Crestron control processor only\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eNot native — requires external controller\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eNot native\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePower over HDBaseT\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eYes — powers receiver (48V, 1A)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePoE+ (IEEE 802.3at, receives power)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePoE on select models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePoE+ PD on receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eAnalog audio embedding\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eYes — 3.5mm jack, adjustable gain\/balance\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eNo analog audio embedding at transmitter\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eAnalog audio on select DTP models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eAnalog audio breakout on receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eEcosystem compatibility\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDBaseT compatible; works with Lightware MX matrix boards\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eCrestron-only ecosystem\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eExtron DTP ecosystem\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eKramer HDBaseT ecosystem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the SW4-TPS-TX240-Plus require a specific receiver model?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt is compatible with any HDBaseT-compliant TPS receiver in the Lightware ecosystem, including the HDMI-TPS-RX95, DVI-HDCP-TPS-RX95, and compatible MX matrix I\/O boards. It also interoperates with third-party HDBaseT receivers, though advanced features like Event Manager and PoTPS are optimized for Lightware pairings.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat cable type is recommended for 4K extension?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eFor 4K UHD at 30Hz, use CAT7 AWG23 S\/FTP cable up to 100 meters. Long-reach mode (170m) is available for 1080p signals at pixel clocks up to 148.5 MHz. CAT5e AWG24 supports up to 70m at 4K and 100m at 1080p.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan the unit switch inputs automatically when a source is detected?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The built-in Event Manager supports autoselect modes — first detect, last detect, and priority — without requiring an external control system. Up to 100 event slots can be configured via the Lightware Device Controller software or RS-232\/Ethernet commands.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the \"Plus\" version differ significantly from the standard SW4-TPS-TX240?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe Plus variant adds the Advanced Control Pack: 100 Event Manager slots (vs. limited slots on standard), native Cisco Room Kit RS-232\/USB integration, CEC command send and receive, and IR HEX code control for third-party displays. The physical specifications are otherwise identical.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs HDCP content protected at 4K resolution?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The unit is HDCP 1.4 compliant with per-input enable\/disable. Note that HDCP 2.2 is not supported; 4K content requiring HDCP 2.2 (e.g., some streaming sources) will require a receiver or matrix that supports the full HDCP 2.2 handshake chain.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan the device be powered without a local power supply?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo — the transmitter requires local power (DC 12V, 2.5A). It is the transmitter that provides Power over TPS to the receiver end, not the other way around. A local power adaptor is included.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase and get support for this product?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe SW4-TPS-TX240-Plus is available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. Our team provides pre-sale configuration advice and post-sale technical support for all Lightware products.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974356238572,"sku":"91540065","price":2227.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-sw4-tps-tx240-plus-tps-hdbasettm-switcher-and-transmitter-for-displayport-hdmi-and-dvi-with-local-monitor-out-91540065-creation-networks-36698.jpg?v=1757925301"},{"product_id":"lightware-edu-p1-product-bundle-sw4-tps-tx240-plus-extender-and-hdmi-4k-de-embedder-interface-91540077","title":"Lightware EDU-P1 Product Bundle: SW4-TPS-TX240-Plus extender and HDMI-4K de-embedder interface - 91540077","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Lightware EDU-P1 Product Bundle combines the SW4-TPS-TX240-Plus HDMI\/DVI\/DP transmitter extender with a separate HDMI-4K de-embedder interface in a single purchase optimized for educational and auditorium AV environments. The bundle addresses the specific requirement of de-embedding audio near the presenter or podium — before the signal travels to the distant receiver — allowing the local PA or speaker system to receive audio without running a separate audio cable the full length of the room. It is priced below the cost of purchasing the two components separately.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eIn lecture theaters, auditoriums, and classrooms where the presenter is at the front and the display or projector is at the back or ceiling, the standard approach of de-embedding audio at the receiver creates a cabling problem: audio must be returned from the far end to the local speaker system. The EDU-P1 resolves this by placing the HDMI-4K de-embedder at the transmitter location, extracting stereo audio from the HDMI stream before it is transmitted, and routing that audio directly to the nearest amplifier or DSP.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-edu-p1-product-bundle-sw4-tps-tx240-plus-extender-and-hdmi-4k-de-embedder-interface-91540077-creation-networks-84631.jpg?v=1757925302\" alt=\"Lightware EDU-P1 Bundle: SW4-TPS-TX240-Plus and HDMI-4K De-embedder\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe SW4-TPS-TX240-Plus handles multi-format source switching (DVI, HDMI 1.4, DisplayPort 1.1) and transmits video, audio, Ethernet, RS-232, and IR over a single CAT5\/6\/7 cable up to 170 m. Lightware's Advanced Control Pack 2 adds 100 event slots in the built-in Event Manager, RS-232 and IR command injection for third-party codec control, CEC command handling, and the MiniWeb configurator for touchless room setup via a browser interface. The HDMI-4K de-embedder independently handles 4K content up to 3840x2400 or 4096x2160, passes HDCP-compliant video through unchanged, and de-embeds up to 8-channel PCM audio to a 5-pole Phoenix output while supporting Dolby TrueHD and DTS-HD pass-through.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTransmitter-side audio de-embedding\u003c\/strong\u003e — extracts HDMI audio at the podium before transmission, feeding local PA without a return audio run\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBundle pricing\u003c\/strong\u003e — combined cost is lower than purchasing SW4-TPS-TX240-Plus and HDMI-4K de-embedder separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSW4-TPS-TX240-Plus: multi-format input\u003c\/strong\u003e — accepts DVI, HDMI 1.4, and DisplayPort 1.1 from presenter devices\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTPS extension up to 170 m\u003c\/strong\u003e — single CAT5e\/6\/7 cable carries video, audio, Ethernet 100 Mbps, RS-232, and IR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdvanced Control Pack 2\u003c\/strong\u003e — 100 event slots, RS-232\/IR command injection, CEC support, MiniWeb browser configurator\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePixel Accurate Reclocking\u003c\/strong\u003e — eliminates jitter from source cables and upstream signal degradation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHDMI-4K de-embedder: 4K support\u003c\/strong\u003e — handles 3840x2400 and 4096x2160 with HDCP pass-through\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e8-channel PCM de-embedding\u003c\/strong\u003e — 5-pole Phoenix audio output; Dolby TrueHD and DTS-HD pass-through on video path\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdvanced EDID Management\u003c\/strong\u003e — SW4: 120 factory + 15 user slots; De-embedder: 100 EDID memories (55 factory + 37 user)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAudio embedding at transmitter\u003c\/strong\u003e — 3.5 mm jack input can replace or supplement HDMI embedded audio before transmission\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEthernet extension\u003c\/strong\u003e — 100 Mbps Ethernet carried over TPS link to receiver location\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversity lecture theaters and auditoriums with podium presenter stations and ceiling-mounted projectors\u003c\/li\u003e\n  \u003cli\u003eSecondary school classrooms with interactive displays at the front and audio reinforcement near the teacher position\u003c\/li\u003e\n  \u003cli\u003eConference facilities with distributed speaker systems requiring audio extraction before the TPS link\u003c\/li\u003e\n  \u003cli\u003eHouses of worship with front-of-house audio and distant video projection\u003c\/li\u003e\n  \u003cli\u003eCorporate training rooms with BYOD presenter connections and fixed room audio systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003eSW4-TPS-TX240-Plus Transmitter\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVideo Inputs\u003c\/td\u003e\n\u003ctd\u003eHDMI, DVI-D, DisplayPort (3 connectors)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVideo Output (local)\u003c\/td\u003e\n\u003ctd\u003eHDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTPS Output\u003c\/td\u003e\n\u003ctd\u003eRJ45; carries video, audio, Ethernet, RS-232, IR\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K UHD 3840x2160@30Hz; 1920x1080@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Pixel Clock\u003c\/td\u003e\n\u003ctd\u003e300 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTPS Distance (1080p)\u003c\/td\u003e\n\u003ctd\u003e100 m \/ 130 m LR (CAT5e AWG24)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTPS Distance (4K@30Hz)\u003c\/td\u003e\n\u003ctd\u003e70 m (CAT5e AWG24)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEthernet over TPS\u003c\/td\u003e\n\u003ctd\u003e100 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAudio Input\u003c\/td\u003e\n\u003ctd\u003e3.5 mm stereo jack; volume -96 to 0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRS-232\u003c\/td\u003e\n\u003ctd\u003e3-pole Phoenix; 9600–115200 Baud; pass-through and injection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIR\u003c\/td\u003e\n\u003ctd\u003e3.5 mm jack; HEX code injection supported\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGPIO\u003c\/td\u003e\n\u003ctd\u003e8-pole Phoenix (configurable)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEDID Memory\u003c\/td\u003e\n\u003ctd\u003e120 factory, 15 user programmable\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower over TPS\u003c\/td\u003e\n\u003ctd\u003e48V DC, 1A (to remote receiver)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLocal Power\u003c\/td\u003e\n\u003ctd\u003e12V DC, 2.5A external adaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e8.5W typical\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e221 W x 100.4 D x 26 H mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003eHDMI-4K De-embedder\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003eHDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVideo Output\u003c\/td\u003e\n\u003ctd\u003eHDMI (HDCP pass-through)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e3840x2400 or 4096x2160\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTMDS Data Rate\u003c\/td\u003e\n\u003ctd\u003e3 Gbps per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Cable Equalization\u003c\/td\u003e\n\u003ctd\u003eAutomatic; 20 m at 4K@30Hz; 30 m at 1080p@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAudio Output\u003c\/td\u003e\n\u003ctd\u003e5-pole Phoenix (balanced); de-embeds up to 8-ch PCM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDigital Audio Pass-through\u003c\/td\u003e\n\u003ctd\u003eDolby TrueHD, DTS-HD Master Audio 7.1 (video path)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHeadphone Monitor\u003c\/td\u003e\n\u003ctd\u003e3.5 mm jack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEDID Memory\u003c\/td\u003e\n\u003ctd\u003e100 total: 55 factory, 6 universal, 2 transparent, 37 user\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEDID Control\u003c\/td\u003e\n\u003ctd\u003eFront panel button + selector switch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eDC 5V, 2.5A adaptor; 1.8W max consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e100.4 W x 67.6 D x 26 H mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e250 g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\u003ctd colspan=\"2\" style=\"background:#f2f2f2;\"\u003e\u003cstrong\u003eBoth Units\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years per unit\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background:#f2f2f2;\"\u003e\n      \u003cth\u003eCriteria\u003c\/th\u003e\n      \u003cth\u003eLightware EDU-P1 Bundle\u003c\/th\u003e\n      \u003cth\u003eExtron SW4 HDBT Plus TX\u003c\/th\u003e\n      \u003cth\u003eKramer WP-789R\u003c\/th\u003e\n      \u003cth\u003eAtlona OmniStream R\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTransmitter-side audio de-embed\u003c\/td\u003e\n\u003ctd\u003eYes — dedicated HDMI-4K de-embedder included\u003c\/td\u003e\n\u003ctd\u003eNo — de-embed at receiver only\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBundle pricing\u003c\/td\u003e\n\u003ctd\u003eYes — combined below individual cost\u003c\/td\u003e\n\u003ctd\u003eN\/A — single product\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMulti-format input\u003c\/td\u003e\n\u003ctd\u003eHDMI, DVI, DP on TX\u003c\/td\u003e\n\u003ctd\u003eHDMI + DP\u003c\/td\u003e\n\u003ctd\u003eHDMI only\u003c\/td\u003e\n\u003ctd\u003eHDMI only\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTPS\/HDBaseT max distance\u003c\/td\u003e\n\u003ctd\u003e170 m (LR mode, ≤1080p)\u003c\/td\u003e\n\u003ctd\u003e100 m\u003c\/td\u003e\n\u003ctd\u003e100 m\u003c\/td\u003e\n\u003ctd\u003eN\/A (AoIP)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e4K de-embedder resolution\u003c\/td\u003e\n\u003ctd\u003e4096x2160 included\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEvent Manager automation\u003c\/td\u003e\n\u003ctd\u003e100 event slots; CEC; RS-232\/IR injection\u003c\/td\u003e\n\u003ctd\u003eBasic triggers\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrowser configuration\u003c\/td\u003e\n\u003ctd\u003eYes — MiniWeb configurator\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes (web UI)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTarget environment\u003c\/td\u003e\n\u003ctd\u003eEducation, auditorium, houses of worship\u003c\/td\u003e\n\u003ctd\u003eGeneral AV\u003c\/td\u003e\n\u003ctd\u003eGeneral AV\u003c\/td\u003e\n\u003ctd\u003eEnterprise IT AV\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003e\u003cstrong\u003eWhy would I de-embed audio at the transmitter rather than the receiver?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eIn lecture theaters and auditoriums, the PA system and local speakers are typically located near the presenter at the front of the room. De-embedding at the receiver — which is near the display at the back or ceiling — would require running a separate audio cable back to the front. The EDU-P1's transmitter-side de-embedder eliminates this return run entirely.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eCan the de-embedder handle 4K content without downscaling the video?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. The HDMI-4K de-embedder passes HDMI video through at up to 3840x2400 or 4096x2160 resolution with full HDCP compliance. It extracts audio on a separate path without affecting video quality or resolution.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eWhat receiver is required on the far end of the TPS link?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe SW4-TPS-TX240-Plus is compatible with Lightware TPS receivers in the HDBT\/TPS product family, including the UMX-TPS-RX series and compatible third-party HDBaseT receivers. Confirm receiver compatibility based on the required signal types and distance before installation.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eDoes the MiniWeb configurator require a dedicated control system?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eNo. MiniWeb is a browser-based interface accessible directly from any device on the same network as the transmitter. It enables room configuration and Event Manager setup without proprietary control system software or programming.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eCan the audio input on the transmitter replace the de-embedder's output?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThey serve different purposes. The 3.5 mm audio input on the SW4-TPS-TX240-Plus embeds an external analog audio signal into the TPS stream — replacing or supplementing HDMI-embedded audio sent to the receiver. The HDMI-4K de-embedder extracts audio from the HDMI signal before the transmitter, feeding the local PA directly. Both can be used simultaneously in the signal chain.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eIs this bundle suitable for a BYOD environment where presenters use their own laptops?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. The SW4-TPS-TX240-Plus accepts HDMI, DVI, and DisplayPort inputs, covering most laptop output types in use. USB-C sources require a USB-C to DP or HDMI adapter at the laptop. The Advanced EDID Management ensures the source laptop receives a compatible EDID regardless of the display's native format.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eWhere can I order the EDU-P1 bundle with installation advice?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eAvailable at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. The team can advise on receiver selection, TPS cable requirements, and audio routing for your specific room layout.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974360498412,"sku":"91540077","price":2788.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-edu-p1-product-bundle-sw4-tps-tx240-plus-extender-and-hdmi-4k-de-embedder-interface-91540077-creation-networks-84631.jpg?v=1757925302"},{"product_id":"lightware-umx-tps-tx120-umx-series-tps-transmitter","title":"Lightware UMX-TPS-TX120 UMX Series TPS Transmitter -  91540012","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Lightware UMX-TPS-TX120 is an HDBaseT transmitter in the UMX series, designed to extend HDMI, analog audio, RS-232, IR, and Ethernet signals from a source location to a compatible HDBaseT receiver over a single Cat cable run of up to 100 meters. It integrates directly with Lightware's UMX ecosystem, enabling signal distribution from a central source or switching location to remote display points in corporate meeting rooms, classrooms, and hospitality environments. The UMX-TPS-TX120 supports resolutions up to 1080p and is well-suited for installations where HDMI cable runs exceed practical copper limits.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe UMX-TPS-TX120 transmitter sends a multi-signal bundle — HDMI video, analog audio, RS-232, IR, and 100M Ethernet — over a single Cat5e\/6 cable to a compatible Lightware HDBaseT receiver, replacing multiple individual cables with a single structured-cabling run. The unit is specifically designed to pair with Lightware UMX series receivers in the TPS (Twisted Pair Signal) ecosystem, maintaining signal integrity across the full 100-meter Cat6 distance. Front-panel LEDs indicate link status and signal activity, simplifying troubleshooting during installation and ongoing operation. RS-232 and IR pass-through allow control signals from a room control system to reach source equipment or displays at the remote end without separate control wiring. The Ethernet channel extends network connectivity alongside the AV signal, eliminating the need for a separate data cable to the display location. The unit can be powered by the connected HDBaseT receiver over the TPS link (PoC — Power over Cable) or by a local 12V DC adapter. EDID management is handled through the Lightware TPS system to ensure consistent source compatibility regardless of the connected display.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx120-umx-series-tps-transmitter-91540012-creation-networks-54311.jpg?v=1757925303\" alt=\"Lightware UMX-TPS-TX120 HDBaseT transmitter front panel\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx120-umx-series-tps-transmitter-91540012-creation-networks-14395.jpg?v=1757925303\" alt=\"Lightware UMX-TPS-TX120 input connections\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx120-umx-series-tps-transmitter-91540012-creation-networks-95833.jpg?v=1757925304\" alt=\"Lightware UMX-TPS-TX120 installation view\"\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHDBaseT Signal Extension\u003c\/strong\u003e — Transmits HDMI, audio, RS-232, IR, and Ethernet over a single Cat5e\/6 cable up to 100m\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUMX Ecosystem Integration\u003c\/strong\u003e — Pairs with Lightware UMX TPS receivers for a validated, matched extension system\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Pass-Through\u003c\/strong\u003e — Carries bidirectional control signals alongside the AV signal without additional wiring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEthernet Extension\u003c\/strong\u003e — Passes 100Mbps network connectivity to the remote endpoint over the TPS cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower over Cable (PoC)\u003c\/strong\u003e — Can be powered by the connected receiver, eliminating a local power adapter at the transmitter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnalog Audio Input\u003c\/strong\u003e — Accepts stereo analog audio for embedding or routing alongside the HDMI signal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLink Status LEDs\u003c\/strong\u003e — Front-panel indicators for quick visual confirmation of signal and link health\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — Works with Lightware TPS system for consistent display EDID emulation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact Desktop or Rack Form\u003c\/strong\u003e — Small footprint suitable for table-top, furniture, or rack installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCorporate meeting rooms requiring HDMI extension from a wall plate or credenza to a rack-mounted AV system\u003c\/li\u003e\n  \u003cli\u003eClassrooms extending laptop HDMI output to a ceiling-mounted projector via structured Cat cabling\u003c\/li\u003e\n  \u003cli\u003eBoardrooms with under-table connectivity where HDMI cable runs exceed 10–15 meter limits\u003c\/li\u003e\n  \u003cli\u003eHotel conference rooms providing HDMI connectivity to guest devices via structured cabling infrastructure\u003c\/li\u003e\n  \u003cli\u003eRetail and hospitality digital signage installations where media players are remote from displays\u003c\/li\u003e\n  \u003cli\u003eGovernment briefing rooms extending secure source signals over existing Cat6 infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003e1x HDMI (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTPS Output\u003c\/td\u003e\n\u003ctd\u003e1x RJ-45 (HDBaseT, Cat5e\/6)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p60 \/ WUXGA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003eUp to 100m (Cat6)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAudio Input\u003c\/td\u003e\n\u003ctd\u003e1x Analog stereo (3.5mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e100Mbps pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e12V DC (adapter included) or PoC from receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e≤8W\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eVia Lightware TPS ecosystem\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eCompact desktop\/rack\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware UMX-TPS-TX120\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProduct Role\u003c\/td\u003e\n\u003ctd\u003eHDBaseT transmitter\u003c\/td\u003e\n\u003ctd\u003eHDBaseT receiver\u003c\/td\u003e\n\u003ctd\u003eHDBaseT transmitter\/receiver\u003c\/td\u003e\n\u003ctd\u003eHDBaseT receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p60\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100m (Cat6)\u003c\/td\u003e\n\u003ctd\u003e100m (Cat6A)\u003c\/td\u003e\n\u003ctd\u003e70m (Cat6)\u003c\/td\u003e\n\u003ctd\u003e100m (Cat6)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRS-232 Pass-Through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIR Pass-Through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eEthernet Extension\u003c\/td\u003e\n\u003ctd\u003eYes, 100Mbps\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePower over Cable\u003c\/td\u003e\n\u003ctd\u003eYes (PoC from receiver)\u003c\/td\u003e\n\u003ctd\u003eYes (PoE from switch)\u003c\/td\u003e\n\u003ctd\u003eYes (PoE)\u003c\/td\u003e\n\u003ctd\u003eYes (PoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAnalog Audio Input\u003c\/td\u003e\n\u003ctd\u003eYes, 3.5mm\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eWhat receiver is this transmitter designed to pair with?\u003c\/dt\u003e\n  \u003cdd\u003eThe UMX-TPS-TX120 is designed to work within Lightware's UMX TPS ecosystem, pairing with Lightware UMX series TPS receivers such as the HDMI-TPS-RX110AY. Using a matched Lightware receiver ensures all signal channels — video, audio, RS-232, IR, and Ethernet — function correctly end-to-end.\u003c\/dd\u003e\n  \u003cdt\u003eCan the UMX-TPS-TX120 work with non-Lightware HDBaseT receivers?\u003c\/dt\u003e\n  \u003cdd\u003eHDBaseT is a standardized protocol, so basic video extension may function with third-party receivers. However, features such as Lightware-specific EDID management, PoC power, and full control signal pass-through are validated only with matched Lightware receivers. Third-party interoperability is not guaranteed.\u003c\/dd\u003e\n  \u003cdt\u003eIs Cat5e or Cat6 required, and does the cable grade affect performance?\u003c\/dt\u003e\n  \u003cdd\u003eThe unit operates on Cat5e at reduced distances and Cat6 for the full 100-meter run. Cat6A is recommended for installations where performance margin is important. Shielded cable (STP) is advisable in high-interference environments such as industrial or live event settings.\u003c\/dd\u003e\n  \u003cdt\u003eDoes this unit support 4K resolution?\u003c\/dt\u003e\n  \u003cdd\u003eThe UMX-TPS-TX120 supports resolutions up to 1080p60. For 4K HDBaseT extension, consider Lightware's TPS products in the HDMI 2.0 or 4K-capable product lines.\u003c\/dd\u003e\n  \u003cdt\u003eCan the transmitter be powered without a local power adapter?\u003c\/dt\u003e\n  \u003cdd\u003eYes. If the connected Lightware receiver supports Power over Cable (PoC), the transmitter draws power through the Cat cable from the receiver, eliminating the need for a local 12V DC adapter at the transmitter location. Confirm PoC support on the paired receiver before relying on this feature.\u003c\/dd\u003e\n  \u003cdt\u003eHow are RS-232 commands routed — does the control system connect to the transmitter or the receiver?\u003c\/dt\u003e\n  \u003cdd\u003eThe control system typically connects to the RS-232 port on whichever end is more accessible. Commands are passed transparently through the TPS link, so the control system can communicate with equipment at either end of the cable run from a single connection point.\u003c\/dd\u003e\n  \u003cdt\u003eWhere can I purchase a complete TX\/RX system for a meeting room installation?\u003c\/dt\u003e\n  \u003cdd\u003e\n\u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e stocks matched Lightware HDBaseT transmitter and receiver pairs and can assist with system design, cable specification, and quantity pricing for multi-room installations.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974363971820,"sku":"91540012","price":1798.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx120-umx-series-tps-transmitter-91540012-creation-networks-54311.jpg?v=1757925303"},{"product_id":"lightware-umx-tps-tx130-umx-series-tps-transmitter-91540013","title":"Lightware UMX-TPS-TX130 UMX Series TPS Transmitter -  91540013","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware UMX-TPS-TX130 is a UMX Series TPS transmitter that accepts multiple input signals and transmits the selected source over a single CATx cable using Lightware's TPS HDBaseT-compatible protocol. It is designed as a compact, multi-input transmitter for conference rooms, training environments, and small meeting spaces where a local switcher-transmitter is needed at the presenter position before sending the signal to a remote display or matrix system. The UMX Series focuses on simplicity and reliability for everyday commercial AV deployment.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe UMX-TPS-TX130 combines input selection and TPS transmission in a single compact unit, allowing AV integrators to provide a clean multi-source connection point at the presenter table or equipment location without a separate switcher. It accepts HDMI and other signal types, selects the active source, and transmits the output over a single Cat5e or Cat6 cable to a compatible TPS receiver at the display location.\u003c\/p\u003e\u003cp\u003eThe transmitter supports Power over Twisted Pair, delivering power to the connected TPS receiver so no local power supply is required at the display end. RS-232 and IR control signals pass through the TPS link, enabling display management from the transmitter location or a central control system. EDID management at the input ensures connected source devices receive a consistent and appropriate display capability profile. The unit integrates with Lightware's LW3 control protocol and is compatible with Crestron, AMX, Extron, and other third-party control systems, making it straightforward to incorporate into existing building automation and AV control infrastructure.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx130-umx-series-tps-transmitter-91540013-creation-networks-70715.jpg?v=1757925305\" alt=\"Lightware UMX-TPS-TX130 TPS Transmitter front view\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx130-umx-series-tps-transmitter-91540013-creation-networks-96326.jpg?v=1757925306\" alt=\"Lightware UMX-TPS-TX130 rear panel connections\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx130-umx-series-tps-transmitter-91540013-creation-networks-28054.jpg?v=1757925307\" alt=\"Lightware UMX-TPS-TX130 installation view\"\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Input Selection\u003c\/strong\u003e — Accepts and switches between multiple source inputs at the presenter or equipment location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPS Transmission over CATx\u003c\/strong\u003e — Sends selected source over a single Cat5e or Cat6 cable to a remote TPS receiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower over Twisted Pair\u003c\/strong\u003e — Powers the connected TPS receiver through the CATx link, eliminating the need for a remote power supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Extension\u003c\/strong\u003e — Passes control signals to the display via the TPS cable for remote device management\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — Provides stable EDID emulation to source devices for reliable plug-and-display operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLW3 Protocol\u003c\/strong\u003e — Open IP control protocol compatible with all major third-party control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact UMX Form Factor\u003c\/strong\u003e — Designed for rack shelf, furniture, or wall-box mounting at the presenter location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT Compatible Infrastructure\u003c\/strong\u003e — Leverages standard CATx cabling already installed in commercial buildings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSmall to medium conference rooms requiring a local multi-source selection point\u003c\/li\u003e\n\u003cli\u003eTraining rooms and classrooms with instructor-position switcher and display extension\u003c\/li\u003e\n\u003cli\u003eHuddle spaces and collaboration rooms where a compact transmitter-switcher is needed\u003c\/li\u003e\n\u003cli\u003eBoardrooms with presenter table source connectivity feeding room displays\u003c\/li\u003e\n\u003cli\u003eReception areas displaying content from multiple media sources\u003c\/li\u003e\n\u003cli\u003eHospitality AV installations with local source selection and long cable runs to displays\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eLightware UMX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eMulti-input switcher and TPS transmitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLink Type\u003c\/td\u003e\n\u003ctd\u003eLightware TPS (HDBaseT-compatible) over CATx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eCat5e \/ Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower over Link\u003c\/td\u003e\n\u003ctd\u003eYes — powers remote TPS receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable emulation per input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eCompact UMX; rack shelf \/ furniture \/ wall box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware UMX-TPS-TX130\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitcher Built In\u003c\/td\u003e\n\u003ctd\u003eYes — multi-input selection at transmitter; no external switcher needed\u003c\/td\u003e\n\u003ctd\u003eReceiver only; separate switcher required at source\u003c\/td\u003e\n\u003ctd\u003eTransmitter only (no built-in switching on standard models)\u003c\/td\u003e\n\u003ctd\u003eReceiver only; separate switcher required at source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoT \/ PoE to Receiver\u003c\/td\u003e\n\u003ctd\u003eYes — powers receiver over TPS cable\u003c\/td\u003e\n\u003ctd\u003eN\/A (receiver unit)\u003c\/td\u003e\n\u003ctd\u003eYes on TX models\u003c\/td\u003e\n\u003ctd\u003eN\/A (receiver unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e \/ Cat6\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e \/ Cat6\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e \/ Cat6\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e \/ Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Pass-through\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet (on RX end)\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable per input via LW3\u003c\/td\u003e\n\u003ctd\u003eVia Crestron toolbox\u003c\/td\u003e\n\u003ctd\u003eVia Extron SMP\u003c\/td\u003e\n\u003ctd\u003eVia Kramer K-Upload\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eOpen LW3; third-party ready\u003c\/td\u003e\n\u003ctd\u003ePrimarily Crestron\u003c\/td\u003e\n\u003ctd\u003eSIS; third-party compatible\u003c\/td\u003e\n\u003ctd\u003eRS-232\/IP; third-party compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor Flexibility\u003c\/td\u003e\n\u003ctd\u003eCompact UMX; fits rack shelf or furniture\u003c\/td\u003e\n\u003ctd\u003eStandard enclosure\u003c\/td\u003e\n\u003ctd\u003eStandard enclosure\u003c\/td\u003e\n\u003ctd\u003eStandard enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEcosystem\u003c\/td\u003e\n\u003ctd\u003eWorks with any LW3-compatible or Lightware TPS receiver\u003c\/td\u003e\n\u003ctd\u003eBest within Crestron DM ecosystem\u003c\/td\u003e\n\u003ctd\u003eBest within Extron DTP ecosystem\u003c\/td\u003e\n\u003ctd\u003eBest within Kramer TP-500\/700 series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eDoes the UMX-TPS-TX130 function as both a switcher and a transmitter?\u003c\/dt\u003e\n\u003cdd\u003eYes. The UMX-TPS-TX130 combines multi-input source selection with TPS transmission in a single unit. You connect multiple HDMI or supported sources, select the desired input, and the transmitter sends that signal over the CATx cable to the remote receiver and display.\u003c\/dd\u003e\n\u003cdt\u003eWhat receiver is compatible with the UMX-TPS-TX130?\u003c\/dt\u003e\n\u003cdd\u003eThe UMX-TPS-TX130 is compatible with Lightware TPS receivers within the UMX and compatible product series. Refer to Lightware's compatibility matrix or consult Creation Networks to confirm the appropriate receiver pairing for your project.\u003c\/dd\u003e\n\u003cdt\u003eDoes the transmitter power the receiver?\u003c\/dt\u003e\n\u003cdd\u003eYes. The UMX-TPS-TX130 delivers Power over Twisted Pair to the connected TPS receiver, so no separate power supply is required at the display end of the installation.\u003c\/dd\u003e\n\u003cdt\u003eHow is source selection controlled?\u003c\/dt\u003e\n\u003cdd\u003eSource selection can be controlled via front-panel controls on the unit, RS-232 serial commands, or IP control via the LW3 protocol, allowing integration with room control systems for automated or touch panel-based switching.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable category is required for the TPS link?\u003c\/dt\u003e\n\u003cdd\u003eThe TPS link operates over standard Cat5e or Cat6 CATx cable. Cat6 is recommended for longer runs and 4K content to maintain signal integrity.\u003c\/dd\u003e\n\u003cdt\u003eCan the UMX-TPS-TX130 be used with a Crestron or AMX control system?\u003c\/dt\u003e\n\u003cdd\u003eYes. The LW3 protocol is open and documented, making it compatible with control systems from Crestron, AMX, Extron, Savant, and any platform that supports TCP\/IP or RS-232 control commands.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the UMX-TPS-TX130?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller providing commercial AV solutions and system integration support.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974368854252,"sku":"91540013","price":1963.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx130-umx-series-tps-transmitter-91540013-creation-networks-70715.jpg?v=1757925305"},{"product_id":"lightware-umx-tps-tx140-umx-series-tps-transmitter","title":"Lightware UMX-TPS-TX140 UMX Series TPS Transmitter - 91540008","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware UMX-TPS-TX140 is a universal HDBaseT transmitter from the UMX series that accepts digital and analog video inputs — HDMI 1.4, DVI, DisplayPort 1.1, and VGA\/YPbPr — and transmits the signal up to 170 meters over a single CAT5e or better cable. It is designed for installations where multiple video interface types must be accommodated from a single transmitter, such as training rooms, conference rooms, and classrooms with legacy and current-generation sources. Analog signals including VGA and YPbPr are digitized internally with zero microseconds conversion delay before transmission. Power over TPS (PoTPS) allows the paired receiver to be powered from the CAT cable, removing the need for a local power outlet at the display end.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe UMX-TPS-TX140 transmits uncompressed video up to 9 Gbps (300 MHz pixel clock) at resolutions up to 4K UHD@30Hz in 4:4:4, or 4096x2160@60Hz in 4:2:0. At 1080p60, extension reaches 170 meters on CAT7 AWG23 S\/FTP in long-reach mode. The DVI-I input accepts both analog and digital signals, enabling VGA-to-digital conversion with no perceptible delay. Audio handling supports up to 7.1 HBR formats including Dolby TrueHD and DTS-HD Master Audio from HDMI embedded audio, and analog stereo via a 3.5mm jack and 5-pole Phoenix balanced input.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx140-umx-series-tps-transmitter-91540008-creation-networks-51212.jpg?v=1757925308\" alt=\"Lightware UMX-TPS-TX140 HDBaseT Universal Transmitter\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eAdvanced EDID Management stores 120 factory presets and 15 user-programmable profiles per input connector, forcing the required resolution from any source without manual configuration. The built-in Event Manager supports autoselect modes (first detect, last detect, priority) for automatic input switching. Breakaway audio allows audio and video signals to be routed independently. The unit includes a built-in video test pattern generator and Frame Detector for commissioning and diagnostics. Compatible with Lightware MX modular matrix frames via MX-TPS-IB or MX-TPS2-IB I\/O boards.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal video inputs\u003c\/strong\u003e — HDMI 1.4, DVI-I (analog + digital), DisplayPort 1.1, VGA, YPbPr; all digitized internally\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e170m extension over single CAT5e\/6\/7\u003c\/strong\u003e — video, audio, Ethernet, RS-232, and IR over one cable; 100m at 4K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K UHD support\u003c\/strong\u003e — 3840x2160@30Hz 4:4:4 or 4096x2160@60Hz 4:2:0; 1920x1080@120Hz 4:4:4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUncompressed 9 Gbps video\u003c\/strong\u003e — 300 MHz pixel clock; zero frame delay; Pixel Accurate Reclocking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced EDID Management\u003c\/strong\u003e — 120 factory presets, 15 user slots per input; per-connector EDID lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.1 HBR audio support\u003c\/strong\u003e — Dolby TrueHD, DTS-HD MA from HDMI\/DP embedded; analog stereo embedding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 1.4 compliant\u003c\/strong\u003e — per-input enable\/disable; pass-through to TPS link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower over TPS (PoTPS)\u003c\/strong\u003e — 48V DC, 1A; remotely powers paired receiver over CAT cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Event Manager\u003c\/strong\u003e — autoselect modes; breakaway audio\/video routing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-directional RS-232 and IR\u003c\/strong\u003e — pass-through and command injection; GPIO control ports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet extension (100 Mbps)\u003c\/strong\u003e — LAN pass-through to receiver over the same CAT cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT compatible\u003c\/strong\u003e — cross-compatible with Lightware TPS extenders, I\/O boards, and third-party HDBaseT receivers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms and meeting rooms with mixed laptop inputs (HDMI, DP, VGA legacy) requiring a single transmitter solution\u003c\/li\u003e\n\u003cli\u003eUniversity classrooms with ceiling-mounted projectors at distances beyond copper HDMI limits\u003c\/li\u003e\n\u003cli\u003eTraining rooms where analog and digital sources must both be accommodated without a separate scaler\u003c\/li\u003e\n\u003cli\u003eControl rooms using Lightware MX modular matrix systems with TPS I\/O boards\u003c\/li\u003e\n\u003cli\u003eHome cinema installations with long runs to a display or projector in a separate room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eParameter\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eDigital video inputs\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDMI (Type A), DVI-I, DisplayPort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eAnalog video input\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eVGA connector (YPbPr via DVI-I)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eTPS output\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e1x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eMax resolution (60Hz)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e1600x1200@60Hz; 1920x1080@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eMax resolution (30Hz)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e3840x2160@30Hz 4:4:4; 4096x2160@30Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eMax resolution (120Hz)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e1920x1080@120Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eVideo bandwidth\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e300 MHz; 9 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eVideo delay\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e0 frames (digital); 0 μs (analog conversion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDCP\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDCP 1.4; per-input enable\/disable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eEDID memory\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e120 factory presets, 15 user programmable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eAudio input (digital)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDMI\/DP embedded; up to 7.1 HBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eAudio input (analog)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e3.5mm stereo jack; 5-pole Phoenix balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eAudio formats\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePCM, Dolby TrueHD, DTS-HD MA 7.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eExtension distance (1080p)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eUp to 170m (CAT7 AWG23, long-reach mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eExtension distance (4K)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eUp to 100m (CAT7 AWG23)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eEthernet\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e1x RJ45; 100 Mbps extension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eRS-232\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e3-pole Phoenix; 9600–115200 Baud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eGPIO\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e8-pole Phoenix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eIR\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e3.5mm jack (bi-directional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePower over TPS\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eDC 48V, 1A (powers receiver)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eLocal power supply\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eUniversal adaptor, DC 12V 2.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePower consumption\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e9W typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e221 W x 100.4 D x 26 H mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e1mm metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eCompliance\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eCriteria\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eLightware UMX-TPS-TX140\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eExtron DTP HD 4K 330\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:6px 8px;background:#f4f4f4;\"\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eInput interface types\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDMI, DVI, DP, VGA, YPbPr — all on one unit\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDMI only (receiver unit)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDMI or DP depending on model\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDMI only (receiver unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eMax extension distance\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e170m (1080p, LR mode, CAT7 AWG23)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e100–150m\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e~100m\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e70–130m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eMax resolution\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e4K@30Hz 4:4:4; 1080p@120Hz\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e4K60 4:4:4 (HDBaseT 2.0)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e4K30 4:4:4\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e4K30 HDR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eAnalog input support\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eYes — VGA, YPbPr digitized internally\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eNo (HDMI-in only on DTP TX models)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eAudio format support\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e7.1 HBR, Dolby TrueHD, DTS-HD MA; analog embed\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eUp to 8-ch PCM; HDMI ARC\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e8-ch PCM embedded\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003e8-ch PCM; analog breakout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePower over HDBaseT\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eYes — PoTPS to receiver (48V, 1A)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePoE+ PD (receives power)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePoE on select models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003ePoE+ PD on receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eMatrix integration\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eCompatible with Lightware MX matrix (MX-TPS-IB boards)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eCrestron matrix only\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eExtron DTP crosspoint matrix\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eKramer matrix only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDCP\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDCP 1.4; per-input enable\/disable\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDCP 2.2\u003c\/td\u003e\n\u003ctd style=\"padding:6px 8px;\"\u003eHDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat makes the UMX-TPS-TX140 different from other Lightware TPS transmitters?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe UMX designation indicates a universal multi-format input. Unlike single-interface TPS transmitters, the TX140 accepts HDMI, DVI (analog + digital DVI-I), DisplayPort, VGA, and YPbPr — all on one device. Analog signals are digitized internally with zero conversion delay, functioning as a built-in format converter without the need for an external scaler.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich receivers are compatible?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe UMX-TPS-TX140 is compatible with Lightware HDBaseT-compliant receivers including the HDMI-TPS-RX95, DVI-HDCP-TPS-RX95, TPS-PI-1P1 injector, and MMX6x2-HT series. It also interfaces with Lightware MX modular matrix frames via MX-TPS-IB or MX-TPS2-IB I\/O boards. Third-party HDBaseT receivers may work for basic extension, though advanced features require Lightware pairings.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat cable is required for 4K transmission?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eFor 4K UHD at 30Hz, CAT7 AWG23 S\/FTP is recommended for runs up to 100 meters. Standard HD (1080p) extends to 170 meters on CAT7 AWG23 in long-reach mode, and to 100 meters on CAT5e AWG24. CAT5e AWG24 supports 4K at up to 70 meters.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan the device switch inputs automatically?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The built-in Event Manager supports three autoselect modes: first detect (switches to first active source), last detect (switches to the most recently connected source), and priority (switches according to a user-defined input priority). No external control system is required for basic autoselect operation.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs breakaway audio\/video routing supported?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Audio and video signals can be routed independently, allowing a different audio source to be embedded with a video signal. This is useful in presentation environments where background music or a room audio source needs to remain active while switching video inputs.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes this unit support HDMI 3D formats?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. Frame packing, side-by-side, and top-bottom 3D formats are supported over HDMI 1.4. The signal is transmitted transparently over the TPS link to the receiver end.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase and get support for this product?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe UMX-TPS-TX140 is available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. Our team provides pre-sale configuration support and post-sale technical assistance for all Lightware products.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974371573996,"sku":"91540008","price":2062.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx140-umx-series-tps-transmitter-91540008-creation-networks-51212.jpg?v=1757925308"},{"product_id":"lightware-umx-tps-tx140-plus-umx-series-tps-hdbasettm-transmitter-91540059","title":"Lightware UMX-TPS-TX140-Plus UMX Series TPS (HDBaseTTM) Transmitter - 91540059","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware UMX-TPS-TX140-Plus is an HDBaseT-compatible TPS transmitter in the UMX Series that accepts HDMI and VGA sources with analog audio and extends them over a single Cat5e\/Cat6 cable to a TPS receiver at distances up to 100 meters. It is designed as the source-side transmitter in Lightware's TPS extension and matrix distribution infrastructure, pairing with receivers such as the HDMI-TPS-RX220AK to create a complete KVM-capable HDBaseT link. The unit simultaneously passes USB 2.0 HID signals, RS-232, and IR over the same CATx cable, making it a complete AV and control extension solution for conference rooms, classrooms, and healthcare environments where structured cabling infrastructure is already in place.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx140-plus-umx-series-tps-hdbasettm-transmitter-91540059-creation-networks-47964.jpg?v=1757925309\" alt=\"Lightware UMX-TPS-TX140-Plus HDBaseT Transmitter\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eThe UMX-TPS-TX140-Plus accepts HDMI 1.4 and VGA video inputs with associated analog audio, making it suitable for environments where both modern HDMI laptops and legacy VGA equipment must connect to the same AV infrastructure. The transmitter processes the active source and sends the signal over Cat5e\/Cat6 using Lightware's TPS protocol, which complies with the HDBaseT specification for long-distance transport of video, audio, USB, RS-232, and IR on a single cable. USB 2.0 from a host PC connects to the transmitter and extends HID devices (keyboard, mouse, touchscreen) from the receiver location back to the host, enabling full KVM over Cat cabling. RS-232 from a room control processor and IR from an IR emitter can also be extended to the display location over the same cable. The unit is part of Lightware's UMX ecosystem and can function both as a standalone point-to-point transmitter paired with a TPS receiver, or as an input module to a Lightware UMX matrix switcher. Lightware Device Controller software provides EDID management, routing configuration, and diagnostics over Ethernet.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Input: HDMI and VGA\u003c\/strong\u003e — Accepts HDMI 1.4 and VGA with analog audio, supporting both modern and legacy presentation devices at the source end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT \/ TPS Transmission\u003c\/strong\u003e — Extends video, audio, USB, RS-232, and IR over a single Cat5e\/Cat6 cable to 100 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB 2.0 KVM Extension\u003c\/strong\u003e — Passes USB HID device signals from the receiver location back to the connected host PC for full KVM operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Passthrough\u003c\/strong\u003e — Bidirectional control signal extension over the TPS link for room automation and display control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 1.4 Compliant\u003c\/strong\u003e — Supports HDCP 1.4 content protection for HDMI source signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUMX Matrix Compatible\u003c\/strong\u003e — Operates as a transmitter input to Lightware UMX matrix switchers for multi-room distribution deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — Per-input EDID control via Lightware Device Controller for stable source-to-display compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Transmitter Form Factor\u003c\/strong\u003e — Small chassis for rack, lectern, or furniture mounting at the source location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClassroom AV extension from a teacher's PC or laptop to a display at the front of the room\u003c\/li\u003e\n\u003cli\u003eConference room BYOD connection point with HDMI and VGA guest inputs\u003c\/li\u003e\n\u003cli\u003eHealthcare bedside or nurse station display system with central computing\u003c\/li\u003e\n\u003cli\u003eCorporate training room with legacy VGA and HDMI laptop connectivity\u003c\/li\u003e\n\u003cli\u003eCourtroom evidence presentation system with secure source location\u003c\/li\u003e\n\u003cli\u003eUniversity seminar room HDMI\/VGA extension to a projection system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Inputs\u003c\/td\u003e\n\u003ctd\u003e1x HDMI 1.4 (Type A), 1x VGA (HD-15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Inputs\u003c\/td\u003e\n\u003ctd\u003e1x 3.5 mm stereo (VGA); HDMI embedded audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Output\u003c\/td\u003e\n\u003ctd\u003eCat5e\/Cat6 RJ-45 (HDBaseT \/ TPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e100 m over Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Resolution\u003c\/td\u003e\n\u003ctd\u003e1920x1080 @ 60 Hz (1080p60)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Type-B (from host PC, extends to receiver)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232 (pass-through), IR (pass-through), Ethernet (LCP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Receivers\u003c\/td\u003e\n\u003ctd\u003eLightware HDMI-TPS-RX220AK, UMX Series TPS receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eExternal DC adapter (included); powers receiver over TPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eCompact transmitter; rack, lectern, or furniture mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware UMX-TPS-TX140-Plus\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 330\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVGA Input\u003c\/td\u003e\n\u003ctd\u003eYes — HD-15 with analog audio\u003c\/td\u003e\n\u003ctd\u003eNo VGA\u003c\/td\u003e\n\u003ctd\u003eNo VGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Input\u003c\/td\u003e\n\u003ctd\u003eYes — HDMI 1.4\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (on receiver side)\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p60\u003c\/td\u003e\n\u003ctd\u003e4K60 HDR\u003c\/td\u003e\n\u003ctd\u003e4K60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB KVM\u003c\/td\u003e\n\u003ctd\u003eYes — USB 2.0 HID extension\u003c\/td\u003e\n\u003ctd\u003eYes — USB-C with charging\u003c\/td\u003e\n\u003ctd\u003eNo USB KVM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 \/ IR\u003c\/td\u003e\n\u003ctd\u003eYes — bidirectional pass-through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100 m Cat6\u003c\/td\u003e\n\u003ctd\u003e90 m Cat6A\u003c\/td\u003e\n\u003ctd\u003e100 m Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceiver Powering\u003c\/td\u003e\n\u003ctd\u003eYes — powers receiver over TPS\u003c\/td\u003e\n\u003ctd\u003ePoE over HDBaseT\u003c\/td\u003e\n\u003ctd\u003eHDBaseT power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEcosystem\u003c\/td\u003e\n\u003ctd\u003eLightware UMX \/ TPS (open)\u003c\/td\u003e\n\u003ctd\u003eCrestron DM (proprietary)\u003c\/td\u003e\n\u003ctd\u003eExtron DTP (proprietary)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eCan the UMX-TPS-TX140-Plus power the HDMI-TPS-RX220AK receiver over the Cat cable?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The transmitter provides DC power to the paired receiver over the Cat5e\/Cat6 TPS cable. No separate power supply is needed at the receiver end, which simplifies installation at display locations without accessible AC outlets.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the transmitter support auto-switching between VGA and HDMI?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The UMX-TPS-TX140-Plus can detect the active input and switch automatically, or input selection can be controlled manually via the connected control system using LCP commands over RS-232 or Ethernet.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the maximum VGA resolution supported?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eVGA signals up to 1920x1200 (WUXGA) are supported. When transmitted over TPS, the output resolution at the receiver is determined by the downstream display's EDID.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs the USB KVM limited to specific device types?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe USB 2.0 KVM extension supports HID-class devices including keyboards, mice, touchscreens, and drawing tablets. USB storage, webcams, and audio interfaces are not supported through the KVM extension path.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan this transmitter be used as part of a Lightware UMX matrix system?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The UMX-TPS-TX140-Plus can serve as an input transmitter to a Lightware UMX matrix switcher, feeding multiple outputs via the matrix routing fabric. This configuration is common in multi-room educational and corporate facilities.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow is EDID managed when both HDMI and VGA sources are present?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eEDID for the HDMI input is communicated from the downstream display via the TPS link. For VGA, EDID is emulated by the transmitter based on the configured or auto-detected display profile, managed via Lightware Device Controller.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase the UMX-TPS-TX140-Plus?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe Lightware UMX-TPS-TX140-Plus is available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. The recommended paired receiver, the HDMI-TPS-RX220AK, is also stocked. Contact Creation Networks for system design and project pricing.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974372098284,"sku":"91540059","price":2227.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx140-plus-umx-series-tps-hdbasettm-transmitter-91540059-creation-networks-47964.jpg?v=1757925309"},{"product_id":"lightware-umx-tps-tx140k-umx-series-tps-hdbasettm-transmitter-with-usb-kvm-91540050","title":"Lightware UMX-TPS-TX140K UMX Series TPS (HDBaseTTM) Transmitter with USB KVM - 91540050","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware UMX-TPS-TX140K is a UMX Series HDBaseT transmitter that extends HDMI video, USB KVM data, RS-232, IR, and power over a single CAT cable to compatible HDBaseT receivers. The K suffix designates USB KVM functionality, enabling keyboard, mouse, and USB peripheral extension alongside the video signal — consolidating what would otherwise require separate KVM and AV extender hardware. It operates within Lightware's UMX ecosystem, which supports centralized equipment room installations where displays, cameras, and control interfaces are located far from the source equipment. Integrators specifying HDBaseT transmitter with USB KVM for boardroom or HDMI over HDBaseT with KVM for corporate AV will find this unit appropriate for that architecture.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe UMX-TPS-TX140K accepts an HDMI source signal and transmits it alongside USB 2.0 KVM data, bidirectional RS-232, and IR control signals over a single CAT6 or CAT6A cable run at distances up to 100 meters. This eliminates the need for separate USB extension hardware and simplifies cable infrastructure in long-run installations. The transmitter is typically installed at the source device location — at a podium, presenter position, or equipment rack — while the matched receiver is located at the display.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx140k-umx-series-tps-hdbasettm-transmitter-with-usb-kvm-91540050-creation-networks-92477.jpg?v=1757925309\" alt=\"Lightware UMX-TPS-TX140K HDBaseT transmitter\"\u003e\u003c\/p\u003e\u003cp\u003ePower over HDBaseT (PoH) capability means the transmitter can receive power from the receiver unit over the same cable, eliminating a local power supply at the transmitter end in many installations. Control system integration is supported via RS-232 and Ethernet, and the unit is compatible with Lightware's LW2 and LW3 protocols. Available from \u003ca href=\"https:\/\/creationnetworks.net\/products\/lightware-umx-tps-tx140k-umx-series-tps-hdbasettm-transmitter-with-usb-kvm-91540050\"\u003eCreation Networks\u003c\/a\u003e with pre-sales engineering support.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT (TPS) Transmission\u003c\/strong\u003e — extends HDMI, USB KVM, RS-232, IR, and power over a single CAT6\/6A cable at distances up to 100 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB KVM Extension\u003c\/strong\u003e — transmits USB 2.0 keyboard, mouse, and peripheral data alongside video, eliminating a separate KVM extender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower over HDBaseT (PoH)\u003c\/strong\u003e — the transmitter can be powered by the receiver over the same cable, reducing local power supply requirements at the source end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBidirectional RS-232\u003c\/strong\u003e — passes serial control data in both directions, enabling control system communication with devices at either end of the link.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR Extension\u003c\/strong\u003e — extends infrared remote control signals over the HDBaseT link for source device control from the display end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUMX Ecosystem Compatibility\u003c\/strong\u003e — designed for use within Lightware's UMX matrix and point-to-point systems, enabling flexible centralized AV architectures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP Compliant\u003c\/strong\u003e — supports HDCP-protected content throughout the transmission chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Transmitter Form Factor\u003c\/strong\u003e — small housing suitable for podium, table, or rack installation at the source position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eUMX-TPS-TX140K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Medium\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (TPS) over CAT6 \/ CAT6A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003eUp to 100 m over CAT6A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003e1 x HDMI (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB KVM\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 (keyboard, mouse, peripherals)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial Control\u003c\/td\u003e\n\u003ctd\u003eRS-232 (bidirectional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR\u003c\/td\u003e\n\u003ctd\u003eBidirectional IR over HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePower over HDBaseT (PoH) or local power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP Support\u003c\/td\u003e\n\u003ctd\u003eHDCP 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Protocol\u003c\/td\u003e\n\u003ctd\u003eLW2 \/ LW3 via Ethernet or RS-232\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEcosystem\u003c\/td\u003e\n\u003ctd\u003eLightware UMX Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware UMX-TPS-TX140K\u003c\/th\u003e\n\u003cth\u003eCrestron HD-MD4X2-4KZ-E\u003c\/th\u003e\n\u003cth\u003eExtron SW 2 HDMI 4K\u003c\/th\u003e\n\u003cth\u003eKramer VS-21H\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Medium\u003c\/td\u003e\n\u003ctd\u003eHDBaseT over CAT6\/6A\u003c\/td\u003e\n\u003ctd\u003eCopper \/ local HDMI\u003c\/td\u003e\n\u003ctd\u003eLocal HDMI only\u003c\/td\u003e\n\u003ctd\u003eLocal HDMI only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100 m (CAT6A)\u003c\/td\u003e\n\u003ctd\u003eLocal \/ up to 40 m with extender\u003c\/td\u003e\n\u003ctd\u003eLocal\u003c\/td\u003e\n\u003ctd\u003eLocal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB KVM Included\u003c\/td\u003e\n\u003ctd\u003eYes — USB 2.0 KVM over same cable\u003c\/td\u003e\n\u003ctd\u003eNo native KVM\u003c\/td\u003e\n\u003ctd\u003eNo KVM\u003c\/td\u003e\n\u003ctd\u003eNo KVM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower over HDBaseT\u003c\/td\u003e\n\u003ctd\u003eYes (PoH)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Passthrough\u003c\/td\u003e\n\u003ctd\u003eYes (bidirectional)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Passthrough\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEcosystem\u003c\/td\u003e\n\u003ctd\u003eLightware UMX matrix ecosystem\u003c\/td\u003e\n\u003ctd\u003eCrestron standalone\u003c\/td\u003e\n\u003ctd\u003eExtron standalone\u003c\/td\u003e\n\u003ctd\u003eKramer standalone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat cable does the UMX-TPS-TX140K require?\u003c\/dt\u003e\n\u003cdd\u003eIt uses standard CAT6 or CAT6A UTP or STP cable. CAT6A is recommended for the full 100-meter distance. Use shielded cable (STP) in electrically noisy environments.\u003c\/dd\u003e\n\u003cdt\u003eDoes the transmitter require its own power supply?\u003c\/dt\u003e\n\u003cdd\u003eNot necessarily. When paired with a compatible Lightware receiver that supports Power over HDBaseT, the transmitter receives power over the same CAT cable, eliminating the need for a local power outlet at the source position.\u003c\/dd\u003e\n\u003cdt\u003eWhat USB devices can be extended?\u003c\/dt\u003e\n\u003cdd\u003eThe KVM channel supports USB 2.0 devices including keyboards, mice, webcams, speakerphones, and USB storage devices, subject to USB 2.0 bandwidth limits per device.\u003c\/dd\u003e\n\u003cdt\u003eWhich receiver should be paired with the TX140K?\u003c\/dt\u003e\n\u003cdd\u003eThe UMX-TPS-TX140K pairs with Lightware UMX-TPS-RX series receivers within the UMX ecosystem. Consult Creation Networks for the correct receiver SKU for your installation.\u003c\/dd\u003e\n\u003cdt\u003eCan it operate within a UMX matrix system?\u003c\/dt\u003e\n\u003cdd\u003eYes. The TX140K is designed for use as a transmitter input card in Lightware UMX matrix frames, in addition to point-to-point deployment with a matched receiver.\u003c\/dd\u003e\n\u003cdt\u003eIs the RS-232 passthrough full bidirectional?\u003c\/dt\u003e\n\u003cdd\u003eYes. RS-232 data passes in both directions over the HDBaseT link, enabling a control processor at the rack to communicate with a source device at the podium, or vice versa.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the UMX-TPS-TX140K?\u003c\/dt\u003e\n\u003cdd\u003eIt is stocked and supported by \u003ca href=\"https:\/\/creationnetworks.net\/products\/lightware-umx-tps-tx140k-umx-series-tps-hdbasettm-transmitter-with-usb-kvm-91540050\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974373114092,"sku":"91540050","price":3052.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-umx-tps-tx140k-umx-series-tps-hdbasettm-transmitter-with-usb-kvm-91540050-creation-networks-92477.jpg?v=1757925309"},{"product_id":"lightware-hdmi-tps-rx220ak-hdbasettm-compatible-tps-receiver-with-usb-kvm-91540022","title":"Lightware HDMI-TPS-RX220AK HDBaseTTM Compatible TPS Receiver with USB KVM - 91540022","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware HDMI-TPS-RX220AK is an HDBaseT-compatible TPS receiver that accepts HDMI and USB KVM signals over a single Cat5e\/Cat6 cable and outputs them locally to a display and USB host, enabling full keyboard-video-mouse extension over structured cabling at distances up to 100 meters. It is designed as the display-side endpoint in Lightware's TPS AV distribution infrastructure, pairing with TPS transmitters or UMX matrix switchers to deliver HDMI video, audio, USB HID devices, RS-232, and IR signals in a single cable run. The HDMI-TPS-RX220AK is particularly suited to classroom, boardroom, and healthcare environments where a single structured cable must carry video, control, and USB peripheral data to the display endpoint.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx220ak-hdbasettm-compatible-tps-receiver-with-usb-kvm-91540022-creation-networks-59392.jpg?v=1757925319\" alt=\"Lightware HDMI-TPS-RX220AK HDBaseT Receiver with USB KVM\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eThe HDMI-TPS-RX220AK outputs HDMI 1.4 video at up to 1080p60 to a local display and simultaneously provides USB 2.0 ports for connecting a keyboard, mouse, touch panel, or other HID device at the display location — with those USB devices appearing at the source PC located up to 100 meters away. This KVM extension capability is essential for control room workstations, nurse station displays, and secondary monitor setups where the computing hardware must remain in a secure central location. The unit supports HDCP 1.4 and handles EDID communication between the local display and the remote source. RS-232 and IR passthrough over the TPS cable allows room control systems and IR commands to be extended from the source rack to the display location. The receiver is powered over the CATx cable from the transmitter or matrix switcher side, requiring no local power supply. It integrates directly with Lightware UMX matrix systems and standalone TPS transmitters including the UMX-TPS-TX140-Plus.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT \/ TPS Receiver\u003c\/strong\u003e — Receives HDMI, USB, RS-232, and IR over a single Cat5e\/Cat6 cable from a TPS transmitter or UMX matrix at up to 100 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB 2.0 KVM Extension\u003c\/strong\u003e — Extends keyboard, mouse, and HID devices from the display location to the remote source PC, enabling full KVM operation over Cat cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 1.4 Output\u003c\/strong\u003e — Outputs up to 1080p60 to the local display with HDCP 1.4 content protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Passthrough\u003c\/strong\u003e — Carries bidirectional control signals over the TPS link for display control and room automation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Powered\u003c\/strong\u003e — Receives DC power over the CATx cable from the transmitter side — no local outlet required at the display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — Reads the local display EDID and communicates it to the source to ensure correct resolution output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightware UMX Integration\u003c\/strong\u003e — Operates as the receive endpoint for Lightware UMX matrix systems and standalone TPS transmitters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor\u003c\/strong\u003e — Small chassis designed for behind-display mounting or furniture installation at the endpoint.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClassroom active learning setups with teacher PC located in a secure AV rack\u003c\/li\u003e\n\u003cli\u003eControl room workstations with displays at operator positions and computers in a secure rack\u003c\/li\u003e\n\u003cli\u003eHealthcare nurse station displays with central server rack computing\u003c\/li\u003e\n\u003cli\u003eUniversity library kiosk stations with USB touch input\u003c\/li\u003e\n\u003cli\u003eBoardroom display-side USB hub for presenter device charging and peripheral sharing\u003c\/li\u003e\n\u003cli\u003eDigital signage endpoints requiring USB media device playback control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Input\u003c\/td\u003e\n\u003ctd\u003eCat5e\/Cat6 RJ-45 (HDBaseT \/ TPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Output\u003c\/td\u003e\n\u003ctd\u003eHDMI 1.4 (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Resolution\u003c\/td\u003e\n\u003ctd\u003e1920x1080 @ 60 Hz (1080p60)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Type-A (KVM extension — HID devices)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232 (pass-through), IR (pass-through)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e100 m over Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eRemote powered via TPS cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Transmitters\u003c\/td\u003e\n\u003ctd\u003eLightware UMX-TPS-TX series, UMX matrix TPS outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eCompact receiver; behind-display or surface mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware HDMI-TPS-RX220AK\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 330\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p60\u003c\/td\u003e\n\u003ctd\u003e4K60 HDR\u003c\/td\u003e\n\u003ctd\u003e4K60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB KVM Extension\u003c\/td\u003e\n\u003ctd\u003eYes — USB 2.0 HID\u003c\/td\u003e\n\u003ctd\u003eYes — USB-C with power delivery\u003c\/td\u003e\n\u003ctd\u003eNo USB KVM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power\u003c\/td\u003e\n\u003ctd\u003eYes — over CATx from transmitter\u003c\/td\u003e\n\u003ctd\u003ePoE from switch or transmitter\u003c\/td\u003e\n\u003ctd\u003eYes — HDBaseT power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 \/ IR\u003c\/td\u003e\n\u003ctd\u003eYes — bidirectional pass-through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e1.4\u003c\/td\u003e\n\u003ctd\u003e2.2 + 1.4\u003c\/td\u003e\n\u003ctd\u003e2.2 + 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100 m Cat6\u003c\/td\u003e\n\u003ctd\u003e90 m Cat6A\u003c\/td\u003e\n\u003ctd\u003e100 m Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEcosystem\u003c\/td\u003e\n\u003ctd\u003eLightware UMX \/ TPS\u003c\/td\u003e\n\u003ctd\u003eCrestron DM\u003c\/td\u003e\n\u003ctd\u003eExtron DTP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Use Case\u003c\/td\u003e\n\u003ctd\u003e1080p KVM extension with control\u003c\/td\u003e\n\u003ctd\u003e4K AV over IP with USB-C\u003c\/td\u003e\n\u003ctd\u003e4K extension — no KVM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat USB devices are supported by the KVM extension on the HDMI-TPS-RX220AK?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe USB 2.0 ports support standard HID-class devices including keyboards, mice, USB touchscreens, and similar input peripherals. USB storage devices and webcams may not function correctly, as the KVM extension is designed for HID traffic rather than high-bandwidth USB data.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the receiver require a local power supply at the display?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. The HDMI-TPS-RX220AK is powered over the Cat5e\/Cat6 cable from the transmitter or UMX matrix switcher. No AC outlet is required at the display end, simplifying installation in ceiling-mount or behind-display configurations.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan this receiver be used with HDBaseT transmitters from other manufacturers?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe TPS protocol is based on HDBaseT, and basic video transmission may work with third-party HDBaseT transmitters. However, USB KVM extension, remote power, and RS-232\/IR passthrough are guaranteed only with Lightware TPS transmitters and UMX matrix systems.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the maximum USB cable length from the receiver to the USB peripheral?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eStandard USB 2.0 cable length limits apply — typically up to 5 meters from the receiver's USB port to the connected HID device.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs the HDMI-TPS-RX220AK compatible with 4K displays?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe receiver outputs a maximum of 1080p60. While it can be connected to a 4K display, the display will receive a 1080p60 signal. For 4K endpoint requirements, consider Lightware's higher-tier TPS or SDVoE products available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow is EDID managed in a system using this receiver?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe receiver reads the EDID from the connected HDMI display and reports it to the source through the TPS link. EDID can also be managed from the transmitter or UMX matrix side using Lightware Device Controller to lock a specific EDID regardless of the display.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat transmitter is the recommended pairing for this receiver?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe UMX-TPS-TX140-Plus is the primary Lightware transmitter designed to work with the HDMI-TPS-RX220AK, supporting HDMI, VGA, and USB inputs at the source end. Both products are available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974375866604,"sku":"91540022","price":2227.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-hdmi-tps-rx220ak-hdbasettm-compatible-tps-receiver-with-usb-kvm-91540022-creation-networks-59392.jpg?v=1757925319"},{"product_id":"lightware-wp-hdmi-tps-tx97-us-wallplate-wp-tps-extender-for-single-catx-cable-with-poe","title":"Lightware WP-HDMI-TPS-TX97-US Wallplate (WP) TPS Extender for Single CATx Cable with PoE - 91540093","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware WP-HDMI-TPS-TX97-US is a US-style single-gang wallplate TPS transmitter that accepts HDMI 4K input from a local source device and extends it over a single CATx cable to a compatible Lightware TPS receiver up to 100 meters away. Designed for installations where a dual-gang plate is not needed, the US single-gang format provides a lower-profile presenter connection point at podiums, conference tables, and wall-mount AV access points. Like the FP-8AT variant, it carries HDCP 2.2-compliant video, bidirectional Ethernet, RS-232, and IR, and accepts PoE from the paired receiver.\u003c\/p\u003e\u003cp\u003ePurchase from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware dealer with technical pre-sales support.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-hdmi-tps-tx97-us-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540093-creation-networks-66013.jpg?v=1757925319\" alt=\"Lightware WP-HDMI-TPS-TX97-US front view\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe TX97-US variant shares the same TPS signal processing and feature set as the TX97-FP-8AT but is housed in a standard US single-gang wallplate body without the screw-terminal audio input. The single-gang format allows installation in wall boxes where space is limited or where the dual-gang profile would be visually inconsistent with surrounding faceplates. It is powered from the receiver end via PoE, so no local power wiring is required at the transmitter location.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-hdmi-tps-tx97-us-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540093-creation-networks-96588.jpg?v=1757925321\" alt=\"Lightware WP-HDMI-TPS-TX97-US side view\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eFor AV integrators standardizing on a single-gang form factor across a project, the TX97-US pairs directly with the WP-HDMI-TPS-RX97 receiver series. All control signals — RS-232 and IR — traverse the same CATx cable, eliminating additional control wiring between the presenter position and display.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHDMI 2.0 input up to 4K60 with HDCP 2.2\u003c\/li\u003e\n\u003cli\u003eTPS (HDBaseT-based) output over single CATx cable up to 100 m\u003c\/li\u003e\n\u003cli\u003ePoE input — powered from paired receiver over the CATx cable\u003c\/li\u003e\n\u003cli\u003eBidirectional 100Base-T Ethernet pass-through\u003c\/li\u003e\n\u003cli\u003eRS-232 and IR pass-through for control signal extension\u003c\/li\u003e\n\u003cli\u003eUS standard single-gang wallplate form factor\u003c\/li\u003e\n\u003cli\u003eNo local power supply required at the transmitter end\u003c\/li\u003e\n\u003cli\u003eCompatible with all Lightware WP-HDMI-TPS-RX97 receivers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room table HDMI connection point in single-gang format\u003c\/li\u003e\n\u003cli\u003ePresenter podium input plate feeding a rear-of-room projector or display\u003c\/li\u003e\n\u003cli\u003eHuddle space wallplate where space constraints prevent dual-gang installs\u003c\/li\u003e\n\u003cli\u003eOpen-plan office meeting areas with wall-mounted AV inputs\u003c\/li\u003e\n\u003cli\u003eHotel meeting room AV where single-gang plates match room aesthetics\u003c\/li\u003e\n\u003cli\u003eClassroom instructor position feeding a distance-learning display system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (Type A), up to 4K60 4:2:0, HDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Output\u003c\/td\u003e\n\u003ctd\u003eRJ-45, Cat6\/Cat6a, up to 100 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Input\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3at — powered from paired receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Pass-through\u003c\/td\u003e\n\u003ctd\u003e100Base-T bidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR in\/out (3.5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eUS single-gang wallplate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to 40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540093\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriterion\u003c\/th\u003e\n\u003cth\u003eLightware WP-HDMI-TPS-TX97-US\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron WP 300\u003c\/th\u003e\n\u003cth\u003eKramer WP-25DN\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0, HDCP 2.2\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4, HDCP 2.2\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0\u003c\/td\u003e\n\u003ctd\u003e4K30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Powered (from RX)\u003c\/td\u003e\n\u003ctd\u003eYes — 802.3at\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes — 100Base-T\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Input\u003c\/td\u003e\n\u003ctd\u003eNo (see FP-8AT for audio input)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eUS single-gang\u003c\/td\u003e\n\u003ctd\u003eUS single-gang\u003c\/td\u003e\n\u003ctd\u003eUS single-gang\u003c\/td\u003e\n\u003ctd\u003eEU single-gang\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl API\u003c\/td\u003e\n\u003ctd\u003eOpen REST + LDC\u003c\/td\u003e\n\u003ctd\u003eCrestron-only\u003c\/td\u003e\n\u003ctd\u003eExtron-only\u003c\/td\u003e\n\u003ctd\u003eKramer-only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat is the difference between the TX97-US and the TX97-FP-8AT?\u003c\/dt\u003e\n\u003cdd\u003eThe TX97-US is a US single-gang wallplate without analog audio input. The TX97-FP-8AT is a dual-gang decora plate that adds screw-terminal analog audio inputs for microphone or line-level sources. Both share the same HDMI, TPS, PoE, Ethernet, RS-232, and IR feature set.\u003c\/dd\u003e\n\u003cdt\u003eDoes the TX97-US require a local power supply?\u003c\/dt\u003e\n\u003cdd\u003eNo. The transmitter is powered entirely from the paired receiver over the CATx cable via PoE (IEEE 802.3at). No AC outlet or power brick is needed at the transmitter location.\u003c\/dd\u003e\n\u003cdt\u003eWhich receiver is compatible with the TX97-US?\u003c\/dt\u003e\n\u003cdd\u003eThe WP-HDMI-TPS-TX97-US is designed for use with the Lightware WP-HDMI-TPS-RX97 series receivers, including the RX97-FP-8AT. Both are available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e.\u003c\/dd\u003e\n\u003cdt\u003eCan the transmitter be installed in a floor box?\u003c\/dt\u003e\n\u003cdd\u003eYes. The single-gang form factor fits standard single-gang floor-box modules. Since it is PoE-powered from the receiver, no electrical outlet in the floor box is required for the AV portion of the installation.\u003c\/dd\u003e\n\u003cdt\u003eWhat is the maximum cable run at 4K resolution?\u003c\/dt\u003e\n\u003cdd\u003eUp to 100 meters on Cat6a. Cat6 supports approximately 70–80 meters at 4K. For 1080p content, Cat5e can reach 100 meters, but Cat6a is always the preferred choice for new installations targeting longevity and 4K performance.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974376915180,"sku":"91540093","price":1468.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-hdmi-tps-tx97-us-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540093-creation-networks-66013.jpg?v=1757925319"},{"product_id":"lightwarewp-hdmi-tps-rx97-us-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540079","title":"Lightware WP-HDMI-TPS-RX97-US Wallplate (WP) TPS Extender for Single CATx Cable with PoE - 91540079 (Discontinued)","description":"\u003cp data-mce-fragment=\"1\"\u003eHe WP-HDMI-TPS-RX97 series twisted pair HDBaseT™ compatible extenders provide extension of uncompressed 4K\/UHD video with embedded audio (up to eight channel PCM or HBR audio) for long distances over a single CATx cable. The unit offers bi-directional RS-232, IR, and Ethernet pass-through on the same CATx cable that carries the video signal. The TPS extenders support full HDCP and EDID compliance and work on all standard AV resolutions up to 4K and 48-bit color depth, also handling all standard audio formats and as well as 120 Hz 3D signals. PoE 48V remote powering is available through a single CATx cable, but a local power supply can also be used.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe auto-operation mode allows the device to detect the far-end extender’s mode and adopt to it. If the far-end device is in Auto Mode or it is a third-party HDBaseT™ device the link will be set to HDBaseT™ mode. If the far device is in forced Long Reach Mode then the auto-operation will set the link to Long Reach Mode. The 'IR OUT' can operate in either Wired (unmodulated) or Emitter (modulated) mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe WP-HDMI-TPS-TX97 and WP-HDMI-TPS-RX97 are compatible with HDBaseT™ extenders and matrix switchers.\u003c\/p\u003e\n\u003cdiv class=\"custom-tab-content\"\u003e\n\u003ctable style=\"width: 100%;\" border=\"0\" data-mce-style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003e\n\u003cp style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003eTransmitter and Front plate\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003emodel and Part Number\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" colspan=\"4\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003eDimensions (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd rowspan=\"2\"\u003e\n\u003cp style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003eRecommended outlet box type\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003efor mounting\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003ea\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003eb\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003ec\u003csub\u003e1\u003c\/sub\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003ec\u003csub\u003e2\u003c\/sub\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eWP-HDMI-TPS EU plate\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e55450227\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e80\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e150\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e24,5\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e33,4\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eEuropean two gang panel\u003cbr\u003ePart no.: 77190-D3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eWP-HDMI-TPS UK plate\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e55450228\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e80\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e140\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e24,5\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e33,4\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAppleby galvanised steel\u003cbr\u003eknockout boxes 2g 47mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eWP-HDMI-TPS US plate\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e55450229\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e114.3\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e115.9\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e24,5\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e33,4\u003c\/td\u003e\n\u003ctd\u003eCarlon B225R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eWP-HDMI-TPS FP-8AT plate\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e55450230\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e104,5\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e111,5\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e24,5\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e33,4\u003c\/td\u003e\n\u003ctd\u003eLegrand 8AT floor panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul class=\"list-arrow-red\"\u003e\n\u003cli\u003ePost production studios\u003c\/li\u003e\n\u003cli\u003eControl room\u003c\/li\u003e\n\u003cli\u003eDigital Signage\u003c\/li\u003e\n\u003cli\u003eMultiroom video\u003c\/li\u003e\n\u003cli\u003eConference rooms, collaborative telepresence\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cdiv style=\"display: block;\" aria-hidden=\"false\" role=\"tabpanel\" aria-labelledby=\"tab-label-features.tab\" data-name=\"features.tab\" data-role=\"content\" id=\"features.tab\" class=\"data item content\"\u003e\n\u003cdiv class=\"product featured highlighted-attributes\"\u003e\n\u003cul class=\"highlighted-list\"\u003e\n\u003cli\u003eCan be remote powered through CATx cable (PoE PD)\u003c\/li\u003e\n\u003cli\u003eSupports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)\u003c\/li\u003e\n\u003cli\u003eSupports deep color signals (24\/30\/36 bit RGB\/YCbCr 4:4:4)\u003c\/li\u003e\n\u003cli\u003e1920x1080@120Hz\/4:4:4, 4096x2160@30Hz\/4:4:4 or 60Hz\/4:2:0 maximum resolutions (300MHz)\u003c\/li\u003e\n\u003cli\u003eHDMI 1.4, HDCP 1.4 and DVI 1.0 compliant\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant (transparent pass-through)\u003c\/li\u003e\n\u003cli\u003eUncompressed video up to 9 Gbps datarate (300 MHz pixel clock)\u003c\/li\u003e\n\u003cli\u003eNo signal latency, zero frame delay\u003c\/li\u003e\n\u003cli\u003eSelectable operation mode (Auto or forced Long Reach mode)\u003c\/li\u003e\n\u003cli\u003eCross compatible with TPS series Lightware extenders and I\/O boards (HDBaseT compatible)\u003c\/li\u003e\n\u003cli\u003ePhoenix 2-pol DC power connector\u003c\/li\u003e\n\u003cli\u003eSupports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)\u003c\/li\u003e\n\u003cli\u003eExtension distance up to 170 meters (with CAT7 S\/FTP AWG23 cable, 1920x1080p60)\u003c\/li\u003e\n\u003cli\u003eHDBaseT compatible\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eEthernet extension (100 Mbps)\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eSelectable IR output mode for emitter or wired connectivity\u003c\/li\u003e\n\u003cli\u003eTransparent EDID pass-through\u003c\/li\u003e\n\u003cli\u003eCEC support (pass-through)\u003c\/li\u003e\n\u003cli\u003eSupports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)\u003c\/li\u003e\n\u003cli\u003eNo video compression\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eBi-directional RS-232 and IR extension (pass-through)\u003c\/li\u003e\n\u003cli\u003eCompatible with several standard floor boxes\u003c\/li\u003e\n\u003cli\u003eLow power mode (standby)\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eExtends DVI or HDMI 1.4 + Audio + Ethernet + RS-232 + IR over one CAT5\/6\/7 cable\u003c\/li\u003e\n\u003cli\u003eActive fan cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ctable border=\"0\" style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData rate:\u003c\/td\u003e\n\u003ctd\u003e3.4 Gbps per color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution:\u003c\/td\u003e\n\u003ctd\u003eAll HDMI 1.4a resolutions supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEqualization:\u003c\/td\u003e\n\u003ctd\u003eAdaptive, automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID support:\u003c\/td\u003e\n\u003ctd\u003eTransparent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP pass through:\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet pass-through:\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 pass through:\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR pass through:\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower:\u003c\/td\u003e\n\u003ctd\u003eUniversal power adaptor, DC 48 V 2.5 A, PoE \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall signal delay:\u003c\/td\u003e\n\u003ctd\u003e10µs (including 100m CATx cable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption (-RX):\u003c\/td\u003e\n\u003ctd\u003e5.3 W (typ) 6.1 W (max)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure:\u003c\/td\u003e\n\u003ctd\u003e1 mm metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight:\u003c\/td\u003e\n\u003ctd\u003e330 g \/ product\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance:\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty:\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cspan\u003e\u003cstrong\u003eConnectors\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTX input, RX output:\u003c\/td\u003e\n\u003ctd\u003eHDMI connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTX output, RX input:\u003c\/td\u003e\n\u003ctd\u003eRJ45 (TPS interface)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet:\u003c\/td\u003e\n\u003ctd\u003eRJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR In, out:\u003c\/td\u003e\n\u003ctd\u003e3.5mm TRS connector (1\/8’’ mini-jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial port:\u003c\/td\u003e\n\u003ctd\u003e3-pole PHOENIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower:\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2-pole PHOENIX\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\"\u003e\u003cspan\u003e\u003cstrong\u003eMax cable lengths with the available firmware versions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003e \u003cstrong\u003eResolution\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd rowspan=\"2\"\u003e \u003cstrong\u003ePixel clock rate\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd colspan=\"3\"\u003e\u003cspan\u003e\u003cstrong\u003eCable lengths (Auto \/ LR link mode)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCAT5e AWG24\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCAT7 AWG26**\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cstrong\u003eCAT7 AWG23\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1024x768@60Hz\u003c\/td\u003e\n\u003ctd\u003e65 MHz\u003c\/td\u003e\n\u003ctd\u003e100 m \/ 130 m*\u003c\/td\u003e\n\u003ctd\u003e90 m \/ 120 m*\u003c\/td\u003e\n\u003ctd\u003e120 m \/ 170 m*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1280x720p@60Hz\u003c\/td\u003e\n\u003ctd\u003e73,8 MHz\u003c\/td\u003e\n\u003ctd\u003e100 m \/ 130 m*\u003c\/td\u003e\n\u003ctd\u003e90 m \/ 120 m*\u003c\/td\u003e\n\u003ctd\u003e120 m \/ 170 m*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1920x1080p@60Hz \/ 24bpp\u003c\/td\u003e\n\u003ctd\u003e148,5 MHz\u003c\/td\u003e\n\u003ctd\u003e100 m \/ 130 m*\u003c\/td\u003e\n\u003ctd\u003e90 m \/ 120 m*\u003c\/td\u003e\n\u003ctd\u003e120 m \/ 170 m*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1920x1200@60Hz\u003c\/td\u003e\n\u003ctd\u003e152,9 MHz\u003c\/td\u003e\n\u003ctd\u003e100 m \/ NA\u003c\/td\u003e\n\u003ctd\u003e90 m \/ NA\u003c\/td\u003e\n\u003ctd\u003e120 m \/ NA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1600x1200@60Hz\u003c\/td\u003e\n\u003ctd\u003e162 MHz\u003c\/td\u003e\n\u003ctd\u003e100 m \/ NA\u003c\/td\u003e\n\u003ctd\u003e90 m \/ NA\u003c\/td\u003e\n\u003ctd\u003e120 m \/ NA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1920x1080@60Hz \/ 36bpp\u003c\/td\u003e\n\u003ctd\u003e223 MHz\u003c\/td\u003e\n\u003ctd\u003e70 m \/ NA\u003c\/td\u003e\n\u003ctd\u003e70 m \/ NA\u003c\/td\u003e\n\u003ctd\u003e100 m \/ NA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3840x2160@30Hz UHD\u003c\/td\u003e\n\u003ctd\u003e297 MHz\u003c\/td\u003e\n\u003ctd\u003e70 m \/ NA\u003c\/td\u003e\n\u003ctd\u003e70 m \/ NA\u003c\/td\u003e\n\u003ctd\u003e100 m \/ NA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4096x2160@30Hz 4K\u003c\/td\u003e\n\u003ctd\u003e297 MHz\u003c\/td\u003e\n\u003ctd\u003e70 m \/ NA\u003c\/td\u003e\n\u003ctd\u003e70 m \/ NA\u003c\/td\u003e\n\u003ctd\u003e100 m \/ NA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\"\u003e*with long reach firmware option. Long reach firmware supports pixel clock frequencies up to 148,5 MHz.\u003cbr\u003e**Distances are 20% shorter if remote powering used. AWG 26 cables are not recommended with remote powering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974380323052,"sku":"91540079","price":990.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-hdmi-tps-rx97-us-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540079-discontinued-creation-networks-16624.png?v=1757925321"},{"product_id":"lightware-wp-hdmi-tps-tx97-fp-8at-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540090","title":"Lightware WP-HDMI-TPS-TX97-FP-8AT Wallplate (WP) TPS Extender for Single CATx Cable with PoE - 91540090","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware WP-HDMI-TPS-TX97-FP-8AT is a wallplate-format HDBaseT TPS transmitter that accepts an HDMI 4K source at the presenter or source location and extends it over a single CATx cable to a remote receiver. The dual-gang US decora face plate form factor mounts flush into a standard wall box, providing a clean finish at podiums, conference tables, and presentation walls. It supports HDCP 2.2, carries bidirectional Ethernet and control signals, and can be PoE-powered from the paired receiver, eliminating local power wiring at the source end.\u003c\/p\u003e\u003cp\u003eAvailable at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e with authorized Lightware warranty and pre-sales engineering.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-hdmi-tps-tx97-fp-8at-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540090-creation-networks-96342.png?v=1757925325\" alt=\"Lightware WP-HDMI-TPS-TX97-FP-8AT front view\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe TX97-FP-8AT is installed at the source end of a TPS extension run. A presenter connects their laptop or device to the HDMI input on the wallplate face, and the signal travels across the existing Cat cable infrastructure to the matched RX97 receiver at the display. HDCP 2.2 compliance ensures content-protected sources and displays work without handshake issues. The screw-terminal microphone\/line input on the 8AT variant allows an analog audio source to be injected at the transmitter and carried to the receiver alongside the HDMI audio.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-hdmi-tps-tx97-fp-8at-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540090-creation-networks-56358.png?v=1757925326\" alt=\"Lightware WP-HDMI-TPS-TX97-FP-8AT rear\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003ePoE input from the receiver means the TX97-FP-8AT does not need a local AC outlet. This is particularly valuable in furniture-integrated AV, floor boxes, and conference table installs where adding electrical service is a significant additional cost.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHDMI 2.0 input supporting up to 4K60 and HDCP 2.2\u003c\/li\u003e\n\u003cli\u003eTPS (HDBaseT-based) output over single CATx cable up to 100 m\u003c\/li\u003e\n\u003cli\u003ePoE input — powered from paired RX97 receiver over the CATx cable\u003c\/li\u003e\n\u003cli\u003eBidirectional 100Base-T Ethernet pass-through\u003c\/li\u003e\n\u003cli\u003eRS-232 and IR pass-through for control signal extension\u003c\/li\u003e\n\u003cli\u003eAnalog audio input (screw terminal) for microphone or line-level sources\u003c\/li\u003e\n\u003cli\u003eDual-gang US decora wallplate form factor (FP designation)\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference table HDMI connection point for laptop presentations\u003c\/li\u003e\n\u003cli\u003eLectern or instructor desk HDMI input feeding a classroom projector\u003c\/li\u003e\n\u003cli\u003eBoardroom table surface-mount AV with clean wallplate finish\u003c\/li\u003e\n\u003cli\u003eFloor box installations in open-plan meeting spaces\u003c\/li\u003e\n\u003cli\u003eDivisible room systems where table inputs feed a main rear-of-room receiver\u003c\/li\u003e\n\u003cli\u003eRetail and hospitality presentation areas requiring furniture-integrated AV\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Input\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (Type A), up to 4K60 4:2:0, HDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Output\u003c\/td\u003e\n\u003ctd\u003eRJ-45, Cat6\/Cat6a, up to 100 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Input\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3at — powered from paired receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Pass-through\u003c\/td\u003e\n\u003ctd\u003e100Base-T bidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Input\u003c\/td\u003e\n\u003ctd\u003eAnalog stereo (screw terminals)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR in\/out (3.5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eDual-gang US decora wallplate (FP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to 40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540090\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriterion\u003c\/th\u003e\n\u003cth\u003eLightware WP-HDMI-TPS-TX97-FP-8AT\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron WP 300\u003c\/th\u003e\n\u003cth\u003eKramer WP-25DN\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0, HDCP 2.2\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4, HDCP 2.2\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0\u003c\/td\u003e\n\u003ctd\u003e4K30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Powered (from RX)\u003c\/td\u003e\n\u003ctd\u003eYes — 802.3at from paired RX\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo — local PSU required\u003c\/td\u003e\n\u003ctd\u003eNo — local PSU required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Input\u003c\/td\u003e\n\u003ctd\u003eYes — screw terminal\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes — 100Base-T\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eUS dual-gang decora\u003c\/td\u003e\n\u003ctd\u003eUS single-gang\u003c\/td\u003e\n\u003ctd\u003eUS single-gang\u003c\/td\u003e\n\u003ctd\u003eEU single-gang\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl API\u003c\/td\u003e\n\u003ctd\u003eOpen REST + LDC\u003c\/td\u003e\n\u003ctd\u003eCrestron-only\u003c\/td\u003e\n\u003ctd\u003eExtron-only\u003c\/td\u003e\n\u003ctd\u003eKramer-only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhich receiver pairs with the WP-HDMI-TPS-TX97-FP-8AT?\u003c\/dt\u003e\n\u003cdd\u003eThe paired receiver is the Lightware WP-HDMI-TPS-RX97-FP-8AT. Both units are available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e. For installations requiring a rack-mount receiver, Lightware offers compatible 1U TPS receiver units in the same product family.\u003c\/dd\u003e\n\u003cdt\u003eDoes this transmitter need its own power supply?\u003c\/dt\u003e\n\u003cdd\u003eNo. The TX97-FP-8AT is powered entirely via PoE from the RX97 receiver over the CATx cable. No local power supply or outlet is required at the transmitter end, which significantly simplifies furniture and floor-box installations.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable type is required?\u003c\/dt\u003e\n\u003cdd\u003eCat6a is recommended for 100-meter runs at 4K. Cat6 supports approximately 70–80 meters at 4K resolution. For 1080p content, Cat5e can support the full 100 meters, but Cat6a is always preferred for future-proofing.\u003c\/dd\u003e\n\u003cdt\u003eCan I use this transmitter with a non-Lightware receiver?\u003c\/dt\u003e\n\u003cdd\u003eThe TX97 uses Lightware TPS technology based on HDBaseT. Cross-brand compatibility with third-party HDBaseT receivers depends on the specific implementation details of each device. For guaranteed signal integrity and PoE operation, Lightware recommends using matched Lightware transmitter-receiver pairs.\u003c\/dd\u003e\n\u003cdt\u003eWhat is the screw-terminal audio input used for?\u003c\/dt\u003e\n\u003cdd\u003eThe 8AT designation includes screw-terminal analog audio inputs that allow a microphone or line-level audio source to be inserted at the transmitter location and carried to the receiver. This is useful in conference rooms where a table microphone connects at the presenter position and feeds into a ceiling speaker system or room audio DSP via the receiver.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974381109484,"sku":"91540090","price":1468.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-hdmi-tps-tx97-fp-8at-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540090-creation-networks-96342.png?v=1757925325"},{"product_id":"lightware-wp-hdmi-tps-rx97-fp-8at-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540079","title":"Lightware WP-HDMI-TPS-RX97-FP-8AT Wallplate (WP) TPS Extender for Single CATx Cable with PoE - 91540094","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware WP-HDMI-TPS-RX97-FP-8AT is a wallplate-format HDBaseT TPS receiver that delivers HDMI 4K video, embedded audio, Ethernet, and control signals from a remote transmitter over a single CATx cable at distances up to 100 meters. The FP (Face Plate) form factor mounts directly into a standard wall box, and the integrated PoE capability means the connected transmitter can be powered from this receiver unit, eliminating a local power supply at the source end. The 8AT suffix denotes the dual-gang US decora plate style with screw-terminal audio output.\u003c\/p\u003e\u003cp\u003eOrder from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e with full Lightware warranty and technical support.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-hdmi-tps-rx97-fp-8at-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540094-creation-networks-12641.png?v=1757925328\" alt=\"Lightware WP-HDMI-TPS-RX97-FP-8AT front view\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe RX97 receiver terminates at the display end of a TPS (Twisted Pair Signal) extension run. It connects to an HDMI display, projector, or AV receiver and accepts a CATx cable from a paired Lightware TPS transmitter. All signals — 4K HDMI video, HDCP 2.2, bidirectional Ethernet, RS-232, and IR — are carried on that single cable. The wallplate design is particularly valued in room renovation projects where cable infrastructure exists but wall boxes need AV connectivity without visible box hardware.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-hdmi-tps-rx97-fp-8at-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540094-creation-networks-60431.png?v=1757925329\" alt=\"Lightware WP-HDMI-TPS-RX97-FP-8AT installed\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eThe integrated PoE output on the RX97 can power a compatible TPS transmitter at the far end, meaning only the display-side requires AC power. This simplifies wiring in lecterns, floor boxes, and furniture-mounted AV where adding a power outlet is not practical.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHDMI 2.0 output supporting up to 4K60 and HDCP 2.2\u003c\/li\u003e\n\u003cli\u003eCATx extension up to 100 m (Cat6 or Cat6a recommended)\u003c\/li\u003e\n\u003cli\u003ePoE output to power paired TPS transmitter over the same CATx cable\u003c\/li\u003e\n\u003cli\u003eBidirectional 100Base-T Ethernet pass-through\u003c\/li\u003e\n\u003cli\u003eRS-232 and IR pass-through for display control\u003c\/li\u003e\n\u003cli\u003eWallplate (FP) form factor — fits standard dual-gang US wall box\u003c\/li\u003e\n\u003cli\u003eScrew-terminal analog audio output for ceiling speaker connections\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant end-to-end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room displays receiving from a lectern or table-mounted transmitter\u003c\/li\u003e\n\u003cli\u003eClassroom projectors connected to an instructor-desk TPS transmitter\u003c\/li\u003e\n\u003cli\u003eHotel room televisions receiving content from a set-top box via TPS extension\u003c\/li\u003e\n\u003cli\u003eBoardroom flat panels in furniture-integrated AV systems\u003c\/li\u003e\n\u003cli\u003eDigital signage displays where the media player is in a remote equipment rack\u003c\/li\u003e\n\u003cli\u003eFloor-box or furniture-mount installations requiring PoE-fed transmitters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Output\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0 (Type A), up to 4K60 4:2:0, HDCP 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCATx Input\u003c\/td\u003e\n\u003ctd\u003eRJ-45, Cat6\/Cat6a recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Extension Distance\u003c\/td\u003e\n\u003ctd\u003e100 m (Cat6a)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Pass-through\u003c\/td\u003e\n\u003ctd\u003e100Base-T bidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Output\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3at — powers paired TPS transmitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Output\u003c\/td\u003e\n\u003ctd\u003eAnalog stereo (screw terminals)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eDual-gang US decora wallplate (FP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to 40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540094\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriterion\u003c\/th\u003e\n\u003cth\u003eLightware WP-HDMI-TPS-RX97-FP-8AT\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron WP 300\u003c\/th\u003e\n\u003cth\u003eKramer WP-25DN\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0, HDCP 2.2\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4, HDCP 2.2\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0\u003c\/td\u003e\n\u003ctd\u003e4K30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Output (to TX)\u003c\/td\u003e\n\u003ctd\u003eYes — 802.3at\u003c\/td\u003e\n\u003ctd\u003eYes — 802.3at\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes — 100Base-T\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Output\u003c\/td\u003e\n\u003ctd\u003eYes — screw terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Pass-through\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eUS dual-gang decora wallplate\u003c\/td\u003e\n\u003ctd\u003eUS single-gang decora\u003c\/td\u003e\n\u003ctd\u003eUS single-gang\u003c\/td\u003e\n\u003ctd\u003eEU single-gang\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEcosystem\u003c\/td\u003e\n\u003ctd\u003eLightware TPS — open control API\u003c\/td\u003e\n\u003ctd\u003eCrestron-only\u003c\/td\u003e\n\u003ctd\u003eExtron-compatible\u003c\/td\u003e\n\u003ctd\u003eKramer-compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhich transmitter is paired with the WP-HDMI-TPS-RX97-FP-8AT?\u003c\/dt\u003e\n\u003cdd\u003eIt is designed to work with Lightware WP-HDMI-TPS-TX97 series transmitters. The TX97-FP-8AT and TX97-US models are the typical wallplate transmitter counterparts. Contact \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e to specify the correct TX model for your project.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable category is required for 100-meter runs?\u003c\/dt\u003e\n\u003cdd\u003eCat6a is recommended for maximum 100-meter extension. Cat6 will typically support 70–80 meters at 4K resolution. Lower resolutions may extend further on Cat5e, but Cat6a is the safest choice for new installations.\u003c\/dd\u003e\n\u003cdt\u003eDoes the receiver power the transmitter automatically?\u003c\/dt\u003e\n\u003cdd\u003eYes. The RX97-FP-8AT provides PoE to the CATx cable and a compatible TPS transmitter draws power from it automatically. No separate power supply is needed at the transmitter end, which simplifies in-wall and furniture installations.\u003c\/dd\u003e\n\u003cdt\u003eCan this receiver be used with a third-party HDBaseT transmitter?\u003c\/dt\u003e\n\u003cdd\u003eThe unit uses Lightware's TPS technology, which is based on HDBaseT. Compatibility with third-party HDBaseT devices depends on the specific implementation. For guaranteed performance, Lightware recommends using matched Lightware transmitters and receivers within the same product line.\u003c\/dd\u003e\n\u003cdt\u003eDoes the analog audio output work independently of the HDMI output?\u003c\/dt\u003e\n\u003cdd\u003eYes. The screw-terminal analog audio output carries the de-embedded audio from the HDMI stream and operates whether or not an HDMI display is connected, making it suitable for driving ceiling speakers independently.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974382584044,"sku":"91540094","price":1468.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-hdmi-tps-rx97-fp-8at-wallplate-wp-tps-extender-for-single-catx-cable-with-poe-91540094-creation-networks-12641.png?v=1757925328"},{"product_id":"lightware-fp-hdmi-tps-tx97-gb3-floorbox-fp-tps-extender-for-single-catx-cable-with-poe","title":"Lightware FP-HDMI-TPS-TX97-GB3 Floorbox (FP) TPS Extender for Single CATx Cable with PoE - 91540037","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware FP-HDMI-TPS-TX97-GB3 is a floorbox-format TPS extender transmitter designed to accept an HDMI source at a conference table or floor connection point and transmit the signal over a single CATx cable to a remote display location. Built for the GB3 grommet box standard, it installs directly into conference table enclosures, floor boxes, and furniture-integrated AV connectivity points without the need for custom adapters. It pairs with the FP-HDMI-TPS-RX97-GB3 receiver for a complete TPS extension system.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe FP-HDMI-TPS-TX97-GB3 accepts HDMI input from a presenter laptop or media device and encodes it for transmission over Lightware's TPS protocol on a single Cat5e or Cat6 cable. This eliminates the need for long HDMI cable runs to the display, replacing them with the structured CATx infrastructure that is standard in commercial facilities. The transmitter provides PoE power to the receiver at the display end, so no additional power supply is required at the remote location.\u003c\/p\u003e\u003cp\u003eThe unit is built into a grommet-style enclosure that integrates cleanly into GB3-standard floor boxes and conference table ports. RS-232 and IR channels are passed through the TPS link for display control from the source end or from a central control system. EDID management at the transmitter ensures reliable handshaking between the connected laptop or source device and the remote display, preventing common plug-and-display issues. The transmitter is compatible with standard HDMI sources and requires no driver installation on the presenter's device.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-fp-hdmi-tps-tx97-gb3-floorbox-fp-tps-extender-for-single-catx-cable-with-poe-91540037-creation-networks-30837.png?v=1757925331\" alt=\"Lightware FP-HDMI-TPS-TX97-GB3 Floorbox TPS Transmitter\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-fp-hdmi-tps-tx97-gb3-floorbox-fp-tps-extender-for-single-catx-cable-with-poe-91540037-creation-networks-97353.png?v=1757925332\" alt=\"Lightware FP-HDMI-TPS-TX97-GB3 installation view\"\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloorbox \/ Grommet Box Form Factor\u003c\/strong\u003e — GB3-compatible enclosure for direct installation in conference table and floor box mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI Source Input\u003c\/strong\u003e — Accepts HDMI from laptops, media players, and presentation devices without driver installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPS Transmission over CATx\u003c\/strong\u003e — Encodes and sends HDMI over a single Cat5e or Cat6 cable to the remote receiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Output to Receiver\u003c\/strong\u003e — Powers the connected receiver over the TPS cable, eliminating local power at the display end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K UHD Support\u003c\/strong\u003e — Transmits high-resolution content for modern 4K conference room and boardroom displays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Pass-through\u003c\/strong\u003e — Carries control signals to the display via the TPS link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — Emulates display EDID at the source to prevent handshaking failures during presentations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Driver Required\u003c\/strong\u003e — Works as a plug-and-play HDMI connection for presenter devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room table-top presenter connection points feeding room displays\u003c\/li\u003e\n\u003cli\u003eBoardroom and executive meeting room integrated AV furniture connections\u003c\/li\u003e\n\u003cli\u003eTraining facility student or instructor table connectivity stations\u003c\/li\u003e\n\u003cli\u003eHotel meeting and event rooms with table-integrated AV access points\u003c\/li\u003e\n\u003cli\u003eCollaborative workspaces with recessed floor AV connections\u003c\/li\u003e\n\u003cli\u003eCourtroom and hearing room counsel table AV connections to display screens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eFloorbox \/ Grommet Box (GB3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Standard\u003c\/td\u003e\n\u003ctd\u003eHDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Resolution\u003c\/td\u003e\n\u003ctd\u003e4K UHD (3840×2160)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLink Type\u003c\/td\u003e\n\u003ctd\u003eLightware TPS over single CATx (Cat5e \/ Cat6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output\u003c\/td\u003e\n\u003ctd\u003ePoE to connected receiver via TPS link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable EDID emulation at HDMI input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eFlush-mount in GB3 compatible floor or table enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource Compatibility\u003c\/td\u003e\n\u003ctd\u003eStandard HDMI; no driver installation required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware FP-HDMI-TPS-TX97-GB3\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eNative GB3 grommet enclosure for table\/floor integration\u003c\/td\u003e\n\u003ctd\u003eStandard box; floor box mounting requires accessories\u003c\/td\u003e\n\u003ctd\u003eStandard box; floor mounting requires accessories\u003c\/td\u003e\n\u003ctd\u003eStandard box; floor mounting requires accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE to Receiver\u003c\/td\u003e\n\u003ctd\u003eYes — powers receiver over TPS cable\u003c\/td\u003e\n\u003ctd\u003eYes — PoE+ to receiver\u003c\/td\u003e\n\u003ctd\u003eYes — PoE to receiver\u003c\/td\u003e\n\u003ctd\u003eYes — PoE to receiver where supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Requirement\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e \/ Cat6\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e \/ Cat6\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e \/ Cat6\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e \/ Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4K Support\u003c\/td\u003e\n\u003ctd\u003e4K UHD\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 18 Gbps\u003c\/td\u003e\n\u003ctd\u003e4K60 with range trade-offs\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0 at max range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Requirement\u003c\/td\u003e\n\u003ctd\u003eNone — plug-and-play HDMI\u003c\/td\u003e\n\u003ctd\u003eNone — plug-and-play\u003c\/td\u003e\n\u003ctd\u003eNone — plug-and-play\u003c\/td\u003e\n\u003ctd\u003eNone — plug-and-play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Pass-through\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR over TPS\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet over DM cable\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR over DTP cable\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR over CATx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable via LW3\u003c\/td\u003e\n\u003ctd\u003eVia Crestron toolbox\u003c\/td\u003e\n\u003ctd\u003eVia Extron SMP\u003c\/td\u003e\n\u003ctd\u003eVia Kramer K-Upload\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFurniture Integration\u003c\/td\u003e\n\u003ctd\u003ePurpose-built GB3 grommet format\u003c\/td\u003e\n\u003ctd\u003eRequires custom bracket or enclosure\u003c\/td\u003e\n\u003ctd\u003eRequires custom bracket or enclosure\u003c\/td\u003e\n\u003ctd\u003eRequires custom bracket or enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat receiver pairs with the FP-HDMI-TPS-TX97-GB3?\u003c\/dt\u003e\n\u003cdd\u003eThis transmitter pairs with the Lightware FP-HDMI-TPS-RX97-GB3 receiver for a complete floorbox TPS extension system. Both units are sold separately and are designed to work together over a single CATx cable run.\u003c\/dd\u003e\n\u003cdt\u003eCan a presenter connect directly via HDMI without any software or configuration?\u003c\/dt\u003e\n\u003cdd\u003eYes. The transmitter presents as a standard HDMI display to the source device. No drivers or applications are required on the presenter's laptop or playback device.\u003c\/dd\u003e\n\u003cdt\u003eDoes the transmitter need a local power supply in the floor box?\u003c\/dt\u003e\n\u003cdd\u003eThe transmitter itself requires power. It powers the receiver via the TPS link, but the transmitter unit needs to be powered, typically via a low-voltage power supply. Verify the exact power requirements in Lightware's datasheet for this model.\u003c\/dd\u003e\n\u003cdt\u003eWhat is the maximum cable run between transmitter and receiver?\u003c\/dt\u003e\n\u003cdd\u003eMaximum distance depends on resolution and cable quality. For 1080p on Cat6, runs up to approximately 100 meters are achievable. For 4K resolutions, shorter distances apply. Consult Lightware's installation documentation for resolution-to-distance tables.\u003c\/dd\u003e\n\u003cdt\u003eDoes the EDID management prevent the ‘no signal’ issue when a presenter switches laptops?\u003c\/dt\u003e\n\u003cdd\u003eYes. EDID emulation at the transmitter presents a consistent EDID to every source device, so the connected laptop always sees the same display profile regardless of what is connected at the receiver end. This reduces plug-and-display handshake failures significantly.\u003c\/dd\u003e\n\u003cdt\u003eIs this transmitter compatible with HDMI sources from all laptop brands?\u003c\/dt\u003e\n\u003cdd\u003eThe unit accepts standard HDMI and is compatible with HDMI outputs from Windows, Mac, and Chromebook laptops, as well as media players, document cameras, and video conferencing codecs that use HDMI output.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the FP-HDMI-TPS-TX97-GB3?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller for commercial AV integration projects including conference room, boardroom, and training facility installations.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974383698156,"sku":"91540037","price":1963.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-fp-hdmi-tps-tx97-gb3-floorbox-fp-tps-extender-for-single-catx-cable-with-poe-91540037-creation-networks-30837.png?v=1757925331"},{"product_id":"lightware-fp-hdmi-tps-rx97-gb3-floorbox-fp-tps-extender-for-single-catx-cable-with-poe-91540031","title":"Lightware FP-HDMI-TPS-RX97-GB3 Floorbox (FP) TPS Extender for Single CATx Cable with PoE - 91540031","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware FP-HDMI-TPS-RX97-GB3 is a floorbox-format TPS extender receiver that brings HDMI video and control signals from a CATx cable run to an HDMI display, designed for floor-mounted AV connectivity points in conference rooms, training facilities, and open-plan meeting spaces. It receives signals transmitted over a single CATx cable via Lightware's TPS protocol and supports Power over Ethernet for cable-only power delivery. The GB3 designation indicates a Grommet Box form factor compatible with standard floor box installations.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe FP-HDMI-TPS-RX97-GB3 is the display-end receiver in a TPS extender pair, designed specifically for flush-mounted floor box and table-top grommet installations. It accepts the TPS signal from a compatible transmitter over a single Cat5e or Cat6 cable and outputs HDMI to the connected display. This approach eliminates the need for HDMI cable runs across floors, replacing them with the structured CATx cabling that is standard in commercial buildings.\u003c\/p\u003e\u003cp\u003eThe receiver supports 4K UHD resolutions and includes PoE (Power over Ethernet) compatibility, allowing it to be powered from the TPS link without requiring a separate power supply at the floor location. RS-232 and IR pass-through channels extend control signals to connected displays. The unit is built for the practical demands of furniture-integrated and floor-mounted AV points, with a discreet form factor and cable management suited to conference table and training room environments. EDID management ensures reliable source-to-display handshaking regardless of display variation across a facility.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-fp-hdmi-tps-rx97-gb3-floorbox-fp-tps-extender-for-single-catx-cable-with-poe-91540031-creation-networks-28682.png?v=1757925333\" alt=\"Lightware FP-HDMI-TPS-RX97-GB3 Floorbox TPS Receiver\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-fp-hdmi-tps-rx97-gb3-floorbox-fp-tps-extender-for-single-catx-cable-with-poe-91540031-creation-networks-34567.png?v=1757925334\" alt=\"Lightware FP-HDMI-TPS-RX97-GB3 floorbox installation view\"\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloorbox \/ Grommet Box Form Factor\u003c\/strong\u003e — GB3-compatible for flush installation in conference table and floor box enclosures\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPS Extender Technology\u003c\/strong\u003e — Receives HDMI over a single CATx cable (Cat5e or Cat6) from a compatible TPS transmitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K UHD Support\u003c\/strong\u003e — Handles high-resolution display output for modern conference room and presentation displays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower over Ethernet (PoE)\u003c\/strong\u003e — Powered from the TPS link; no separate power supply needed at the floor connection point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Pass-through\u003c\/strong\u003e — Extends control signals to display for remote power and input management\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — Configurable EDID emulation for consistent handshaking across different installed displays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Cable Infrastructure\u003c\/strong\u003e — Uses existing building CATx infrastructure, reducing cable management complexity at furniture level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Compatible\u003c\/strong\u003e — Works with standard HDMI laptops and sources without requiring software configuration at the endpoint\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room tables with center-of-table AV connectivity points\u003c\/li\u003e\n\u003cli\u003eTraining rooms and classrooms with floor-mounted student connection stations\u003c\/li\u003e\n\u003cli\u003eBoardrooms requiring discreet, furniture-integrated presenter connections\u003c\/li\u003e\n\u003cli\u003eCollaborative open-plan workspaces with pop-up or grommet AV points\u003c\/li\u003e\n\u003cli\u003eHotel meeting rooms and event spaces with table-top connectivity\u003c\/li\u003e\n\u003cli\u003eCourt rooms and legislative chambers with counsel table AV connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eFloorbox \/ Grommet Box (GB3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Standard\u003c\/td\u003e\n\u003ctd\u003eHDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Resolution\u003c\/td\u003e\n\u003ctd\u003e4K UHD (3840×2160)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLink Type\u003c\/td\u003e\n\u003ctd\u003eLightware TPS over single CATx (Cat5e \/ Cat6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePower over Ethernet (PoE) from TPS transmitter link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable EDID emulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eFlush-mount in GB3 compatible floor or table enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eLightware FP-HDMI-TPS-RX97-GB3\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron DTP HD 4K 230\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eFloorbox \/ grommet GB3 format — furniture-native installation\u003c\/td\u003e\n\u003ctd\u003eStandard enclosure; requires adapter plate for table mounting\u003c\/td\u003e\n\u003ctd\u003eStandard enclosure; floor box adapters available as accessories\u003c\/td\u003e\n\u003ctd\u003eStandard enclosure; separate mounting kit for table integration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE Power\u003c\/td\u003e\n\u003ctd\u003ePowered via TPS link — no local PSU\u003c\/td\u003e\n\u003ctd\u003ePoE+ from Crestron transmitter or switch\u003c\/td\u003e\n\u003ctd\u003ePoE from DTP transmitter\u003c\/td\u003e\n\u003ctd\u003ePoE from Kramer transmitter or PoE switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e\/Cat6 CATx\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e\/Cat6\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e\/Cat6\u003c\/td\u003e\n\u003ctd\u003eSingle Cat5e\/Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4K Support\u003c\/td\u003e\n\u003ctd\u003e4K UHD output\u003c\/td\u003e\n\u003ctd\u003e4K60 4:4:4 18 Gbps\u003c\/td\u003e\n\u003ctd\u003e4K60 with bandwidth limitations at max range\u003c\/td\u003e\n\u003ctd\u003e4K60 4:2:0 at extended range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Pass-through\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR, Ethernet\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Management\u003c\/td\u003e\n\u003ctd\u003eProgrammable via LW3\u003c\/td\u003e\n\u003ctd\u003eVia Crestron toolbox\u003c\/td\u003e\n\u003ctd\u003eVia Extron SMP\u003c\/td\u003e\n\u003ctd\u003eVia Kramer K-Upload\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntegration\u003c\/td\u003e\n\u003ctd\u003eLW3 open protocol; works with any control system\u003c\/td\u003e\n\u003ctd\u003eDeep Crestron integration; limited third-party\u003c\/td\u003e\n\u003ctd\u003eSIS commands; broad third-party support\u003c\/td\u003e\n\u003ctd\u003eRS-232\/IP; broad third-party support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloor Box Fit\u003c\/td\u003e\n\u003ctd\u003eNative GB3 grommet design; no modification needed\u003c\/td\u003e\n\u003ctd\u003eRequires custom mounting or bracket\u003c\/td\u003e\n\u003ctd\u003eRequires custom mounting or bracket\u003c\/td\u003e\n\u003ctd\u003eRequires custom mounting or bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat floorbox or grommet format does the FP-HDMI-TPS-RX97-GB3 fit?\u003c\/dt\u003e\n\u003cdd\u003eThe unit is designed for GB3-standard grommet and floor box enclosures, which are commonly found in conference table and office furniture. Check the dimensions against your specific floor box enclosure to confirm compatibility before installation.\u003c\/dd\u003e\n\u003cdt\u003eDoes this receiver need a local power supply at the table?\u003c\/dt\u003e\n\u003cdd\u003eNo. The receiver is powered via PoE through the CATx link cable from the transmitter or PoE-capable switch, eliminating the need for a local power adapter inside the floor box enclosure.\u003c\/dd\u003e\n\u003cdt\u003eWhat transmitter does this receiver pair with?\u003c\/dt\u003e\n\u003cdd\u003eThe FP-HDMI-TPS-RX97-GB3 pairs with the Lightware FP-HDMI-TPS-TX97-GB3 transmitter or compatible TPS transmitters. For confirmed pairing compatibility, consult Lightware's product documentation or contact Creation Networks.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable length is supported between transmitter and receiver?\u003c\/dt\u003e\n\u003cdd\u003eMaximum extension distance depends on resolution and cable quality. For 1080p signals over Cat6, runs up to 100 meters are typical. For 4K resolutions, shorter runs are recommended. Refer to Lightware's installation guide for specific distance-resolution combinations.\u003c\/dd\u003e\n\u003cdt\u003eCan the display connected to this receiver be controlled from a central room or rack?\u003c\/dt\u003e\n\u003cdd\u003eYes. RS-232 and IR control signals pass through the TPS link, allowing a control system in the equipment rack to send commands to the display connected at the floor box endpoint.\u003c\/dd\u003e\n\u003cdt\u003eIs this compatible with standard HDMI laptops and presentation devices?\u003c\/dt\u003e\n\u003cdd\u003eYes. The receiver outputs a standard HDMI signal. Any display with an HDMI input is compatible. Laptops and presentation devices connect to the transmitter end of the link via HDMI.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the FP-HDMI-TPS-RX97-GB3?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller specializing in commercial AV integration and floorbox connectivity solutions.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974384287980,"sku":"91540031","price":1963.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-fp-hdmi-tps-rx97-gb3-floorbox-fp-tps-extender-for-single-catx-cable-with-poe-91540031-creation-networks-28682.png?v=1757925333"},{"product_id":"lightware-wp-umx-tps-tx120-us-black-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540009","title":"Lightware WP-UMX-TPS-TX120-US Black UMX Series TPS (HDBaseTTM) Wallplate for VGA and HDMI - 91540014","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware WP-UMX-TPS-TX120-US (Black) is a US-format HDBaseT wallplate transmitter that accepts VGA and HDMI sources at the wall and transmits them over a single CATx cable to a compatible TPS\/HDBaseT receiver at distances up to 100 meters. Part of Lightware's UMX Series, it integrates into standard US single-gang wall boxes and provides a fixed-installation connection point for conference room tables, lecterns, and AV furniture with dark finishes. The unit handles EDID management, HDCP 1.4, and audio embedding, and connects directly to Lightware UMX matrix switchers or standalone TPS receivers without an intermediate transmitter box. The black finish coordinates with dark AV furniture, lecterns, and commercial-grade electrical faceplates in corporate and educational environments.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx120-us-black-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540014-creation-networks-45722.jpg?v=1757925337\" alt=\"Lightware WP-UMX-TPS-TX120-US Black HDBaseT Wallplate\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eThe WP-UMX-TPS-TX120-US accepts a VGA signal with 3.5 mm analog audio and an HDMI signal, allowing presenters to connect either a legacy VGA laptop or a modern HDMI device at the wall. The selected signal is transmitted over Cat5e\/Cat6 structured cabling via Lightware's TPS (Twisted Pair Signal) protocol, which is fully compliant with the HDBaseT standard. Maximum transmission distance is 100 meters for 1080p signals over Cat6. The wallplate is powered directly from the UMX matrix switcher or TPS receiver over the CATx cable — no local power supply is required at the wallplate location. EDID is managed from the connected matrix or receiver, ensuring source devices output at the correct resolution. RS-232 and IR signals are also transmitted over the same CATx cable for control system extension. The black finish is a US single-gang form factor compatible with standard US electrical boxes and Decora-style faceplates, and is the preferred choice for installations with dark furniture, AV carts, or black-finished lecterns where a white plate would be visually inconsistent.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Input: VGA and HDMI\u003c\/strong\u003e — Accepts VGA (with 3.5 mm audio) and HDMI at the wall for both legacy and modern presenter devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT \/ TPS Transmission\u003c\/strong\u003e — Transmits video, audio, RS-232, and IR over a single Cat5e\/Cat6 cable up to 100 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Powering\u003c\/strong\u003e — Powered over CATx from the connected UMX matrix or TPS receiver — no local power supply needed at the wallplate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 1.4 Compliant\u003c\/strong\u003e — Supports HDCP 1.4 content protection for HDMI sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Extension\u003c\/strong\u003e — Carries control signals over the CATx cable to extend room control to the display location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack US Single-Gang Form Factor\u003c\/strong\u003e — Installs in standard US electrical boxes; black finish suits dark AV furniture, lecterns, and commercial interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUMX Series Integration\u003c\/strong\u003e — Connects directly to Lightware UMX matrix switchers as a managed input source without a separate transmitter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — EDID controlled from the downstream matrix or receiver for stable source compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDark-finish AV furniture and lecterns in corporate boardrooms and training rooms\u003c\/li\u003e\n\u003cli\u003eBlack conference room table connection points for presenter laptops\u003c\/li\u003e\n\u003cli\u003eUniversity lecture hall lecterns with dark wood or black laminate finishes\u003c\/li\u003e\n\u003cli\u003eBroadcast and media facility presenter connection panels\u003c\/li\u003e\n\u003cli\u003eCourtroom counsel table and witness stand AV input panels\u003c\/li\u003e\n\u003cli\u003eHotel meeting rooms with contemporary dark-finish furniture\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Inputs\u003c\/td\u003e\n\u003ctd\u003e1x VGA (HD-15), 1x HDMI (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Input\u003c\/td\u003e\n\u003ctd\u003e1x 3.5 mm stereo (for VGA source)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission\u003c\/td\u003e\n\u003ctd\u003eTPS \/ HDBaseT over Cat5e\/Cat6 (RJ-45)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e100 m (1080p60) over Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Resolution\u003c\/td\u003e\n\u003ctd\u003e1920x1080 @ 60 Hz (1080p60)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Extension\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR over TPS cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eRemote powered via TPS cable (no local PSU required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Box Format\u003c\/td\u003e\n\u003ctd\u003eUS single-gang (Decora compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Systems\u003c\/td\u003e\n\u003ctd\u003eLightware UMX Series matrices, TPS standalone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware WP-UMX-TPS-TX120-US (Black)\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eUS wallplate (single-gang, Decora) — Black\u003c\/td\u003e\n\u003ctd\u003eReceiver\/table unit, not wallplate\u003c\/td\u003e\n\u003ctd\u003eRack\/table receiver, not wallplate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVGA Input\u003c\/td\u003e\n\u003ctd\u003eYes — HD-15 with 3.5 mm audio\u003c\/td\u003e\n\u003ctd\u003eNo VGA\u003c\/td\u003e\n\u003ctd\u003eNo VGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Input\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes (as receiver)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Standard\u003c\/td\u003e\n\u003ctd\u003eHDBaseT \/ TPS\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100 m over Cat6\u003c\/td\u003e\n\u003ctd\u003e90 m over Cat6A\u003c\/td\u003e\n\u003ctd\u003e100 m over Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power\u003c\/td\u003e\n\u003ctd\u003eYes — powered over CATx\u003c\/td\u003e\n\u003ctd\u003ePoE from receiver\u003c\/td\u003e\n\u003ctd\u003ePowered by receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 \/ IR Extension\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEcosystem\u003c\/td\u003e\n\u003ctd\u003eLightware UMX — open integration\u003c\/td\u003e\n\u003ctd\u003eCrestron DM ecosystem\u003c\/td\u003e\n\u003ctd\u003eStandalone HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the black WP-UMX-TPS-TX120-US require a local power supply at the wall?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. The wallplate is powered remotely over the Cat5e\/Cat6 cable from the connected Lightware UMX matrix switcher or TPS receiver. No outlet or local power adapter is needed at the installation point.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the difference between the black and white versions?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe WP-UMX-TPS-TX120-US (Black) and (White) are functionally identical. The only difference is the faceplate color. Choose black for dark AV furniture, lecterns, and interiors where a white plate would stand out undesirably; choose white for standard North American light-colored installations.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat cable category is required for 100-meter transmission?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCat6 UTP or STP is recommended for maximum 100-meter transmission at 1080p60. Cat5e supports shorter runs. Shielded cabling is recommended in environments with significant electrical interference.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan this wallplate connect to third-party HDBaseT receivers?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe TPS protocol is HDBaseT compliant, and interoperability with third-party receivers is generally achievable. However, remote powering, RS-232, and IR extension are guaranteed only with Lightware UMX system components.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow is input switching handled between VGA and HDMI?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eInput selection is controlled by the connected UMX matrix or TPS receiver, either manually via control system commands or automatically via active source detection depending on system configuration.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the wallplate support HDCP for protected HDMI content?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. HDCP 1.4 is supported on the HDMI input path. HDCP 2.2 is not supported — sources requiring HDCP 2.2 should be verified for compatibility before deployment.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I order the black WP-UMX-TPS-TX120-US?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe Lightware WP-UMX-TPS-TX120-US in black is available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. The white version is also stocked. Contact Creation Networks for bulk project pricing and AV system design.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974387499244,"sku":"91540014","price":2227.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx120-us-black-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540014-creation-networks-45722.jpg?v=1757925337"},{"product_id":"lightware-wp-umx-tps-tx130-us-black-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540009","title":"Lightware WP-UMX-TPS-TX130-US Black UMX Series TPS (HDBaseTTM) Wallplate for VGA and HDMI - 91540009","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware WP-UMX-TPS-TX130-US Black is a UMX Series HDBaseT wallplate transmitter in a black finish, providing one HDMI and one VGA input for permanent installation in US single-gang wall boxes. It transmits video, audio, RS-232, IR, and Ethernet over a single structured cable to a compatible Lightware UMX matrix or TPS receiver up to 100 meters away. The black faceplate is specified for installations where dark furniture inserts, console surfaces, or equipment finish colors are required. Part number 91540009.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe WP-UMX-TPS-TX130-US Black is the standard single-HDMI HDBaseT wallplate for conference rooms and classrooms where one digital and one VGA analog source is all that is needed at the connection point. Its black faceplate makes it the appropriate choice when white would contrast with the surrounding installation environment.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx130-us-black-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540009-creation-networks-94343.jpg\" alt=\"Lightware WP-UMX-TPS-TX130-US Black HDBaseT Wallplate Transmitter\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eThe unit consolidates all connections into a single CAT5e or CAT6 cable run to the AV rack. RS-232 and IR signals are carried bidirectionally through the HDBaseT link, enabling control of displays and source devices from the control system without additional wiring. Ethernet pass-through provides 100BaseT connectivity over the same cable.\u003c\/p\u003e\u003cp\u003eThe UMX Series design means this wallplate functions natively as an input port in a Lightware UMX matrix infrastructure, supporting centralized routing and management. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI and VGA Inputs\u003c\/strong\u003e — One HDMI digital and one VGA analog input with 3.5mm analog audio for the VGA source\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Faceplate\u003c\/strong\u003e — Specified for dark furniture inserts, equipment consoles, and installations where white is inappropriate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT Single-Cable Transport\u003c\/strong\u003e — Carries video, audio, RS-232, IR, and 100BaseT Ethernet over one CAT5e or CAT6 cable up to 100 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power\u003c\/strong\u003e — Powered via HDBaseT from the receiver; no wall outlet required at the wallplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Single-Gang Compatible\u003c\/strong\u003e — Fits North American standard electrical boxes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUMX Matrix Native Input\u003c\/strong\u003e — Integrates directly as an input card to Lightware UMX matrix switchers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 1.4\u003c\/strong\u003e — Supports protected content from HDCP-compliant HDMI sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Bidirectional Pass-Through\u003c\/strong\u003e — Extends control signals without additional wiring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room with black cable management infrastructure\u003c\/li\u003e\n\u003cli\u003eBoardroom executive table with dark furniture insets\u003c\/li\u003e\n\u003cli\u003eTraining room podium with black equipment console\u003c\/li\u003e\n\u003cli\u003eGovernment briefing room with dark AV furniture\u003c\/li\u003e\n\u003cli\u003eBroadcast production desk input connection\u003c\/li\u003e\n\u003cli\u003eHotel meeting room with dark decor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Inputs\u003c\/td\u003e\n\u003ctd\u003e1x HDMI, 1x VGA (HD-15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Input\u003c\/td\u003e\n\u003ctd\u003e3.5mm stereo analog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (TPS) via RJ-45, CAT5e\/CAT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e100 meters over CAT5e\/CAT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Resolution\u003c\/td\u003e\n\u003ctd\u003e1920x1200 \/ 1080p60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e100BaseT pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eUS single-gang wallplate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eRemote powered via HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 to +40 degrees C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware WP-UMX-TPS-TX130-US Black\u003c\/th\u003e\n\u003cth\u003eCrestron HD-WP-4K-401-C\u003c\/th\u003e\n\u003cth\u003eExtron WP 400\u003c\/th\u003e\n\u003cth\u003eKramer WP-789R\/B(B)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Inputs\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVGA Input\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack Finish\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Integration\u003c\/td\u003e\n\u003ctd\u003eNative UMX input\u003c\/td\u003e\n\u003ctd\u003eCrestron DM ecosystem\u003c\/td\u003e\n\u003ctd\u003eExtron XTP ecosystem\u003c\/td\u003e\n\u003ctd\u003eStandalone or Kramer matrix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p60\u003c\/td\u003e\n\u003ctd\u003e4K 60Hz\u003c\/td\u003e\n\u003ctd\u003e4K 30Hz\u003c\/td\u003e\n\u003ctd\u003e4K 30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUS Form Factor\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eIs there a functional difference between the black and white TX130-US models?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo functional difference. Part 91540009 (black) and part 91540040 (white) are electrically identical. The only difference is the faceplate color. Select based on the installation environment.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow is the TX130-US different from the TX130-Plus-US?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe TX130-US has one HDMI input. The TX130-Plus-US has two HDMI inputs. Choose the Plus model when two separate HDMI devices need to connect at the same wall point.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes this wallplate need a local power supply?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. It is remotely powered via the HDBaseT cable from the receiver or UMX matrix. No electrical outlet is required at the wallplate location.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the maximum cable run?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eUp to 100 meters over CAT5e or CAT6. Quality terminations are important near the upper limit of the cable run.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this compatible with third-party HDBaseT receivers?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBasic HDBaseT video and audio pass-through works with other HDBaseT receivers. Full UMX matrix integration and RS-232 behavior are optimized for Lightware equipment.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat audio inputs are supported?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eA 3.5mm stereo analog audio input is provided for VGA and legacy analog audio sources. HDMI sources pass audio embedded in the HDMI signal.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase the WP-UMX-TPS-TX130-US Black?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAvailable directly from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller serving North American commercial AV integrators.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974392217836,"sku":"91540009","price":2392.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx130-us-black-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540009-creation-networks-94343.jpg?v=1757925337"},{"product_id":"lightware-wp-umx-tps-tx130-plus-us-black-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540071","title":"Lightware WP-UMX-TPS-TX130-Plus-US Black UMX Series TPS (HDBaseTTM) Wallplate for VGA and HDMI - 91540071","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware WP-UMX-TPS-TX130-Plus-US Black is a UMX Series HDBaseT wallplate transmitter in a black finish, designed for US single-gang wall boxes in commercial AV installations. It provides two HDMI inputs and one VGA input, transmitting the selected source over a single CAT5e or CAT6 cable to a Lightware UMX matrix or compatible TPS receiver up to 100 meters away. The black finish is suited for dark furniture inserts, equipment consoles, and conference tables where a white faceplate would stand out. Part number 91540071.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe WP-UMX-TPS-TX130-Plus-US Black delivers the same dual-HDMI plus VGA functionality as the white Plus model, with a black faceplate finish for installations where dark-colored furniture insets and table boxes are specified. Conference tables with black cable management inserts and AV console surfaces benefit from a matching black faceplate rather than a contrasting white one.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx130-plus-us-black-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540071-creation-networks-36348.jpg\" alt=\"Lightware WP-UMX-TPS-TX130-Plus-US Black HDBaseT Wallplate front view\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eThe Plus model supports two HDMI inputs alongside the VGA port, accommodating rooms where both a laptop and a permanently installed video conferencing codec or media player need local HDMI connection. Source selection and routing are managed by the connected Lightware UMX matrix or control system.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx130-plus-us-black-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540071-creation-networks-60665.jpg\" alt=\"Lightware WP-UMX-TPS-TX130-Plus-US Black HDBaseT Wallplate rear view\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eHDBaseT carries video, audio, RS-232, IR, and 100BaseT Ethernet on a single structured cable run, keeping conduit and termination costs low. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual HDMI + VGA Inputs (Plus Model)\u003c\/strong\u003e — Two HDMI ports and one VGA port for mixed-source conference and presentation rooms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Faceplate Finish\u003c\/strong\u003e — Matches dark conference table inserts, equipment consoles, and black cable management hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT Transport\u003c\/strong\u003e — Single CAT5e or CAT6 cable run up to 100 meters carries video, audio, RS-232, IR, and Ethernet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Single-Gang Wall Box Compatible\u003c\/strong\u003e — Installs into standard North American electrical boxes without custom adapters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power via HDBaseT\u003c\/strong\u003e — No local power outlet required; powered from the receiver or matrix\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUMX Matrix Integration\u003c\/strong\u003e — Native input to Lightware UMX matrix switchers for centralized routing and control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 1.4 Support\u003c\/strong\u003e — Compliant with HDCP protected content sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Bidirectional Pass-Through\u003c\/strong\u003e — Extends control signals over the HDBaseT cable plant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExecutive boardroom table with black furniture inserts\u003c\/li\u003e\n\u003cli\u003eConference room with dark AV console\u003c\/li\u003e\n\u003cli\u003eHuddle room with black cable management infrastructure\u003c\/li\u003e\n\u003cli\u003eTraining facility dual-source presentation points\u003c\/li\u003e\n\u003cli\u003eCourtroom evidence presentation input panels\u003c\/li\u003e\n\u003cli\u003eBroadcast studio floor input connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540071\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Inputs\u003c\/td\u003e\n\u003ctd\u003e2x HDMI, 1x VGA (HD-15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Input\u003c\/td\u003e\n\u003ctd\u003e3.5mm stereo analog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (TPS) via RJ-45, CAT5e\/CAT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e100 meters over CAT5e\/CAT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Resolution\u003c\/td\u003e\n\u003ctd\u003e1920x1200 \/ 1080p60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e100BaseT pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eUS single-gang wallplate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eRemote powered via HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 to +40 degrees C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware WP-UMX-TPS-TX130-Plus-US Black\u003c\/th\u003e\n\u003cth\u003eCrestron HD-WP-4K-401-C\u003c\/th\u003e\n\u003cth\u003eExtron WP 400\u003c\/th\u003e\n\u003cth\u003eKramer WP-789R\/B(B)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Inputs\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVGA Input\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack Finish Available\u003c\/td\u003e\n\u003ctd\u003eYes, this model\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Integration\u003c\/td\u003e\n\u003ctd\u003eNative UMX input\u003c\/td\u003e\n\u003ctd\u003eCrestron DM ecosystem\u003c\/td\u003e\n\u003ctd\u003eExtron XTP ecosystem\u003c\/td\u003e\n\u003ctd\u003eStandalone or Kramer matrix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p60\u003c\/td\u003e\n\u003ctd\u003e4K 60Hz\u003c\/td\u003e\n\u003ctd\u003e4K 30Hz\u003c\/td\u003e\n\u003ctd\u003e4K 30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power\u003c\/td\u003e\n\u003ctd\u003eYes, via HDBaseT\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUS Single-Gang\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eIs there a functional difference between the black and white TX130-Plus-US models?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. The only difference is the faceplate color. The black model (91540071) and white model (91540072) are electrically identical. Select based on the furniture or installation environment's color scheme.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow does the Plus model differ from the base TX130 model?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe Plus model provides two HDMI inputs instead of one, allowing connection of a laptop and a second HDMI device such as a codec or Blu-ray player at the same wall point. The base TX130 has one HDMI and one VGA input only.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the wallplate require a local power supply?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. The unit is remotely powered via the HDBaseT cable from the connected receiver or UMX matrix input module. No electrical outlet is needed at the wall.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the maximum cable run distance?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eUp to 100 meters using CAT5e or CAT6. For runs near the 100 meter limit, use quality CAT6 cable with proper terminations to ensure reliable signal integrity.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan this be used with a non-Lightware HDBaseT receiver?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBasic HDBaseT video and audio pass-through is compatible with other HDBaseT receivers. Native UMX matrix integration and full control features require Lightware receiving equipment.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat resolution does this wallplate support?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe unit supports up to 1920x1200 and 1080p60. For 4K source distribution, consider Lightware's TPX or SDVoE product lines.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase the black TX130-Plus-US?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller serving commercial AV integrators across North America.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974392873196,"sku":"91540071","price":2392.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx130-plus-us-black-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540071-creation-networks-36348.jpg?v=1757925338"},{"product_id":"lightware-wp-umx-tps-tx120-us-white","title":"Lightware WP-UMX-TPS-TX120-US White UMX Series TPS (HDBaseTTM) Wallplate for VGA and HDMI - 91540041","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware WP-UMX-TPS-TX120-US (White) is a US-format HDBaseT wallplate transmitter that accepts VGA and HDMI sources at the wall and transmits them over a single CATx cable to a compatible TPS\/HDBaseT receiver at distances up to 100 meters. Part of Lightware's UMX Series, it integrates into standard US single-gang wall boxes and provides a clean, fixed-installation connection point for conference room tables, lecterns, and wall panels. The unit handles EDID management, HDCP 1.4, and audio embedding, and connects directly to Lightware UMX matrix switchers or standalone TPS receivers without an intermediate transmitter box. The white finish coordinates with standard North American electrical faceplates in corporate and educational environments.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx120-us-white-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540041-creation-networks-91095.jpg?v=1757925340\" alt=\"Lightware WP-UMX-TPS-TX120-US White HDBaseT Wallplate front\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx120-us-white-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540041-creation-networks-26215.jpg?v=1757925341\" alt=\"Lightware WP-UMX-TPS-TX120-US White HDBaseT Wallplate rear\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eThe WP-UMX-TPS-TX120-US accepts a VGA signal with 3.5 mm analog audio and an HDMI signal, allowing presenters to connect either a legacy VGA laptop or a modern HDMI device at the wall. The selected signal is then transmitted over Cat5e\/Cat6 structured cabling via Lightware's TPS (Twisted Pair Signal) protocol, which is fully compliant with the HDBaseT standard. Maximum transmission distance is 100 meters for 1080p signals over Cat6. The wallplate is powered directly from the UMX matrix switcher or TPS receiver over the CATx cable — no local power supply is required at the wallplate location. EDID is managed from the connected matrix or receiver, ensuring source devices output at the correct resolution. RS-232 and IR signals can also be transmitted over the same CATx cable for control system extension. The white finish is a US single-gang form factor compatible with standard US electrical boxes and Decora-style faceplates.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Input: VGA and HDMI\u003c\/strong\u003e — Accepts VGA (with 3.5 mm audio) and HDMI at the wall, covering both legacy and modern presenter devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT \/ TPS Transmission\u003c\/strong\u003e — Transmits video, audio, RS-232, and IR over a single Cat5e\/Cat6 cable up to 100 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Powering\u003c\/strong\u003e — Powered over CATx from the connected UMX matrix or TPS receiver — no local power supply needed at the wallplate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 1.4 Compliant\u003c\/strong\u003e — Supports HDCP 1.4 content protection for HDMI sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Extension\u003c\/strong\u003e — Carries control signals over the CATx infrastructure to extend room control to the display location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Single-Gang Form Factor\u003c\/strong\u003e — Installs in standard US electrical boxes; white finish matches North American Decora-style faceplates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUMX Series Integration\u003c\/strong\u003e — Connects directly to Lightware UMX matrix switchers as a managed input source without a separate transmitter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDID Management\u003c\/strong\u003e — EDID controlled from the downstream matrix or receiver for stable source compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room table or credenza connection point for presenter laptops\u003c\/li\u003e\n\u003cli\u003eUniversity lecture hall lectern VGA\/HDMI input panel\u003c\/li\u003e\n\u003cli\u003eCorporate training room wall plate for guest presenter connection\u003c\/li\u003e\n\u003cli\u003eBoardroom table AV connection with clean furniture-mount aesthetic\u003c\/li\u003e\n\u003cli\u003eCourtroom witness stand or counsel table AV input\u003c\/li\u003e\n\u003cli\u003eHotel meeting room presenter connection panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Inputs\u003c\/td\u003e\n\u003ctd\u003e1x VGA (HD-15), 1x HDMI (Type A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Input\u003c\/td\u003e\n\u003ctd\u003e1x 3.5 mm stereo (for VGA source)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission\u003c\/td\u003e\n\u003ctd\u003eTPS \/ HDBaseT over Cat5e\/Cat6 (RJ-45)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e100 m (1080p60) over Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Resolution\u003c\/td\u003e\n\u003ctd\u003e1920x1080 @ 60 Hz (1080p60)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Extension\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR over TPS cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eRemote powered via TPS cable (no local PSU required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Box Format\u003c\/td\u003e\n\u003ctd\u003eUS single-gang (Decora compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Systems\u003c\/td\u003e\n\u003ctd\u003eLightware UMX Series matrices, TPS standalone receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware WP-UMX-TPS-TX120-US (White)\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eUS wallplate (single-gang, Decora)\u003c\/td\u003e\n\u003ctd\u003eReceiver\/table unit, not wallplate\u003c\/td\u003e\n\u003ctd\u003eRack\/table receiver, not wallplate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVGA Input\u003c\/td\u003e\n\u003ctd\u003eYes — HD-15 with 3.5 mm audio\u003c\/td\u003e\n\u003ctd\u003eNo VGA\u003c\/td\u003e\n\u003ctd\u003eNo VGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Input\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes (as receiver)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Standard\u003c\/td\u003e\n\u003ctd\u003eHDBaseT \/ TPS\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100 m over Cat6\u003c\/td\u003e\n\u003ctd\u003e90 m over Cat6A\u003c\/td\u003e\n\u003ctd\u003e100 m over Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power\u003c\/td\u003e\n\u003ctd\u003eYes — powered over CATx\u003c\/td\u003e\n\u003ctd\u003ePoE from receiver\u003c\/td\u003e\n\u003ctd\u003ePowered by receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 \/ IR Extension\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEcosystem\u003c\/td\u003e\n\u003ctd\u003eLightware UMX — open integration\u003c\/td\u003e\n\u003ctd\u003eCrestron DM ecosystem\u003c\/td\u003e\n\u003ctd\u003eStandalone HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the WP-UMX-TPS-TX120-US require a local power supply at the wall?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. The wallplate is powered remotely over the Cat5e\/Cat6 cable from the connected Lightware UMX matrix switcher or TPS receiver. No outlet or local power adapter is needed at the installation point.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat cable category is required for 100-meter transmission?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCat6 UTP or STP is recommended for maximum 100-meter transmission at 1080p60. Cat5e can be used for shorter runs. Shielded cabling (STP\/FTP) is recommended in electrically noisy environments.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan this wallplate be used with non-Lightware HDBaseT receivers?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe WP-UMX-TPS-TX120-US uses Lightware's TPS protocol, which is compliant with the HDBaseT standard. Interoperability with third-party HDBaseT receivers is generally achievable but should be verified on a project-specific basis. Full functionality (power, RS-232, IR) is guaranteed with Lightware UMX system components.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the difference between the white and black versions?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe WP-UMX-TPS-TX120-US (White) and (Black) are functionally identical. The only difference is the faceplate color. Choose white for environments with white or light-colored furniture and walls; choose black for darker AV furniture or rack surrounds. Both use the same US single-gang wall box format.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan I use both VGA and HDMI inputs simultaneously?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe wallplate has two inputs but transmits one selected signal over the TPS cable. Input switching is controlled by the connected UMX matrix or receiver. Auto-switching based on active source detection may be available depending on the connected system configuration.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes the wallplate carry audio from HDMI sources as well as VGA?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. HDMI-embedded audio is carried over the TPS link from the HDMI input. The 3.5 mm analog audio input is provided specifically for VGA sources that carry audio separately.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I order the white WP-UMX-TPS-TX120-US?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe Lightware WP-UMX-TPS-TX120-US in white is available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. The black version is also stocked. Contact Creation Networks for project quantities and system design support.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974396313836,"sku":"91540041","price":2227.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx120-us-white-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540041-creation-networks-91095.jpg?v=1757925340"},{"product_id":"lightware-wp-umx-tps-tx130-us-white-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540040","title":"Lightware WP-UMX-TPS-TX130-US White UMX Series TPS (HDBaseTTM) Wallplate for VGA and HDMI - 91540040","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware WP-UMX-TPS-TX130-US is a white UMX Series HDBaseT wallplate transmitter supporting one HDMI and one VGA input for fixed installations in US-standard single-gang wall boxes. It transmits video, audio, RS-232, IR, and Ethernet over a single CAT5e or CAT6 cable to a compatible receiver at distances up to 100 meters. Designed for integration with Lightware's UMX matrix switchers, this transmitter is the standard single-HDMI variant for conference rooms and classrooms where one digital and one analog input is sufficient. Part number 91540040.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe WP-UMX-TPS-TX130-US addresses the most common presentation scenario: a room where one HDMI source and one VGA legacy device need to connect at the table or wall. The wallplate consolidates both inputs and their associated audio into a single HDBaseT cable run to the AV rack, replacing multiple cable runs with a clean single-cable infrastructure.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx130-us-white-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540040-creation-networks-41448.jpg\" alt=\"Lightware WP-UMX-TPS-TX130-US White HDBaseT Wallplate Transmitter\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eThe unit is remotely powered from the receiver end, so no local power connection is needed at the wall. RS-232 and IR signals are passed bidirectionally through the HDBaseT link, allowing display and source control commands to traverse the cable plant without additional control wiring.\u003c\/p\u003e\u003cp\u003eThe white finish integrates cleanly into North American corporate and educational interior spaces. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller serving commercial AV integrators.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI and VGA Inputs\u003c\/strong\u003e — Accepts one HDMI digital source and one VGA analog source with analog audio at the wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT Transport\u003c\/strong\u003e — Single CAT5e or CAT6 cable carries video, audio, RS-232, IR, and Ethernet up to 100 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Single-Gang Form Factor\u003c\/strong\u003e — Fits standard North American electrical wall boxes without adapters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power\u003c\/strong\u003e — Powered via the HDBaseT link from the receiver; no local power outlet required at the wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUMX Matrix Integration\u003c\/strong\u003e — Functions natively as an input port to Lightware UMX matrix switchers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP 1.4 Compliance\u003c\/strong\u003e — Supports protected content distribution from HDCP-enabled sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Pass-Through\u003c\/strong\u003e — Bidirectional control signal extension for display and device management\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Finish\u003c\/strong\u003e — Standard US faceplate color for commercial and educational installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard conference room presentation input panel\u003c\/li\u003e\n\u003cli\u003eClassroom instructor podium connection point\u003c\/li\u003e\n\u003cli\u003eTraining room table input for laptop and legacy device\u003c\/li\u003e\n\u003cli\u003eHuddle room simple HDMI and VGA connection\u003c\/li\u003e\n\u003cli\u003eHotel meeting room AV input at the table\u003c\/li\u003e\n\u003cli\u003eCorporate lobby display source input\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Inputs\u003c\/td\u003e\n\u003ctd\u003e1x HDMI, 1x VGA (HD-15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Input\u003c\/td\u003e\n\u003ctd\u003e3.5mm stereo analog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (TPS) via RJ-45, CAT5e\/CAT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e100 meters over CAT5e\/CAT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Resolution\u003c\/td\u003e\n\u003ctd\u003e1920x1200 \/ 1080p60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e100BaseT pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eUS single-gang wallplate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eRemote powered via HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 to +40 degrees C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware WP-UMX-TPS-TX130-US\u003c\/th\u003e\n\u003cth\u003eCrestron HD-WP-4K-401-C\u003c\/th\u003e\n\u003cth\u003eExtron WP 400\u003c\/th\u003e\n\u003cth\u003eKramer WP-789R\/B(W)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Inputs\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVGA Input\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport Standard\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (XTP)\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Integration\u003c\/td\u003e\n\u003ctd\u003eNative UMX matrix input\u003c\/td\u003e\n\u003ctd\u003eCrestron DM ecosystem\u003c\/td\u003e\n\u003ctd\u003eExtron XTP ecosystem\u003c\/td\u003e\n\u003ctd\u003eStandalone or Kramer matrix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p60 \/ 1920x1200\u003c\/td\u003e\n\u003ctd\u003e4K 60Hz\u003c\/td\u003e\n\u003ctd\u003e4K 30Hz\u003c\/td\u003e\n\u003ctd\u003e4K 30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Power\u003c\/td\u003e\n\u003ctd\u003eYes, via HDBaseT\u003c\/td\u003e\n\u003ctd\u003eYes, via HDBaseT\u003c\/td\u003e\n\u003ctd\u003eYes, via XTP\u003c\/td\u003e\n\u003ctd\u003eYes, via HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUS Form Factor\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the difference between the TX130-US and TX130-Plus-US?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe TX130-Plus-US adds a second HDMI input. The TX130-US provides one HDMI and one VGA input. Choose the Plus model when two HDMI sources need to connect at the same location.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes this wallplate require a local power supply?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. The unit is remotely powered via the HDBaseT cable from the receiver or matrix end. No electrical outlet is needed at the wall installation point.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat cable is required for the HDBaseT run?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCAT5e or CAT6 unshielded or shielded twisted pair. For runs approaching 100 meters, CAT6 with quality terminations is recommended for consistent signal integrity.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes this work with non-Lightware HDBaseT receivers?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBasic HDBaseT video and audio transport is interoperable with other HDBaseT receivers. RS-232 pass-through and UMX matrix integration features are optimized for Lightware receiving equipment.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat audio formats are supported?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAnalog audio from the 3.5mm input is embedded into the HDBaseT stream. HDMI audio formats supported by the connected HDMI source are passed through as embedded HDMI audio.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this compatible with standard US wall boxes?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The WP-UMX-TPS-TX130-US is designed for US standard single-gang electrical boxes with standard faceplate mounting.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I buy this product?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller serving commercial AV integrators across North America.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974398509292,"sku":"91540040","price":2392.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx130-us-white-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540040-creation-networks-41448.jpg?v=1757925342"},{"product_id":"lightware-wp-umx-tps-tx130-plus-us-white-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540072","title":"Lightware WP-UMX-TPS-TX130-Plus-US White UMX Series TPS (HDBaseTTM) Wallplate for VGA and HDMI - 91540072","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware WP-UMX-TPS-TX130-Plus-US is a white UMX Series HDBaseT wallplate transmitter for VGA and HDMI sources, designed for permanent installation in US-standard single-gang wall boxes. It transmits video, audio, RS-232, IR, and Ethernet over a single CAT cable to a compatible TPS receiver at distances up to 100 meters. The Plus variant adds a second HDMI input port compared to the base TX130 model, supporting installations where two HDMI sources require local switching at the faceplate. Part number 91540072.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe WP-UMX-TPS-TX130-Plus-US is built for conference rooms, boardrooms, and classrooms where presenters need to connect both a laptop via HDMI and a legacy VGA source without an external switcher. The wallplate accepts one VGA input, two HDMI inputs, and includes an audio input for analog sources, consolidating all connections into a single cable run to the room's AV rack.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx130-plus-us-white-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540072-creation-networks-53803.jpg\" alt=\"Lightware WP-UMX-TPS-TX130-Plus-US White HDBaseT Wallplate Transmitter\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\u003cp\u003eHDBaseT technology transports uncompressed video at resolutions up to 1080p60 alongside control signals and power, all over a single CAT5e or CAT6 cable. The UMX Series design integrates directly with Lightware's UMX matrix switchers, allowing the wallplate to function as an input card to a central switching matrix while maintaining a clean faceplate appearance at the table or wall.\u003c\/p\u003e\u003cp\u003eThe white finish matches standard US electrical faceplate conventions, blending into corporate and educational interior designs. Available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual HDMI + VGA Inputs (Plus Model)\u003c\/strong\u003e — Accepts two HDMI sources and one VGA source with analog audio, with local source selection at the faceplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT Transport\u003c\/strong\u003e — Transmits video, audio, RS-232, IR, and Ethernet over a single CAT5e or CAT6 cable up to 100 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS Standard Single-Gang Form Factor\u003c\/strong\u003e — Fits standard US wall boxes, compatible with common faceplates and furniture inserts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUMX Matrix Integration\u003c\/strong\u003e — Designed to operate as an input to Lightware UMX matrix switchers for centralized switching and control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP Compliant\u003c\/strong\u003e — Supports HDCP 1.4 for protected content distribution\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog Audio Input\u003c\/strong\u003e — 3.5mm stereo analog audio input for VGA and legacy audio sources\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Pass-Through\u003c\/strong\u003e — Bidirectional control signal extension for display and source device control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Finish\u003c\/strong\u003e — Matches US standard electrical faceplate conventions for clean installation in corporate and educational environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room BYOD presentation input at the table\u003c\/li\u003e\n\u003cli\u003eBoardroom dual-source presentation switching\u003c\/li\u003e\n\u003cli\u003eUniversity lecture hall podium input panel\u003c\/li\u003e\n\u003cli\u003eTraining room flexible source connection point\u003c\/li\u003e\n\u003cli\u003eCourtroom evidence display input connection\u003c\/li\u003e\n\u003cli\u003eCorporate lobby and reception display feeds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91540072\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Inputs\u003c\/td\u003e\n\u003ctd\u003e2x HDMI, 1x VGA (HD-15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Input\u003c\/td\u003e\n\u003ctd\u003e3.5mm stereo analog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (TPS) via RJ-45, CAT5e\/CAT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e100 meters over CAT5e\/CAT6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Video Resolution\u003c\/td\u003e\n\u003ctd\u003e1920x1200 \/ 1080p60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eHDCP 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRS-232, IR pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e100BaseT pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eUS single-gang wallplate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eRemote powered via TPS (HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 to +40 degrees C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware WP-UMX-TPS-TX130-Plus-US\u003c\/th\u003e\n\u003cth\u003eCrestron HD-WP-4K-401-C\u003c\/th\u003e\n\u003cth\u003eExtron WP 400\u003c\/th\u003e\n\u003cth\u003eKramer WP-789R\/B(W)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Inputs\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVGA Input\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport Standard\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003ctd\u003eHDBaseT (XTP)\u003c\/td\u003e\n\u003ctd\u003eHDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Integration\u003c\/td\u003e\n\u003ctd\u003eNative UMX matrix input\u003c\/td\u003e\n\u003ctd\u003eCrestron DM ecosystem\u003c\/td\u003e\n\u003ctd\u003eExtron XTP ecosystem\u003c\/td\u003e\n\u003ctd\u003eStandalone or Kramer matrix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e1080p60 \/ 1920x1200\u003c\/td\u003e\n\u003ctd\u003e4K 60Hz\u003c\/td\u003e\n\u003ctd\u003e4K 30Hz\u003c\/td\u003e\n\u003ctd\u003e4K 30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Distance\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003ctd\u003e100 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Method\u003c\/td\u003e\n\u003ctd\u003eRemote via HDBaseT\u003c\/td\u003e\n\u003ctd\u003eRemote via HDBaseT\u003c\/td\u003e\n\u003ctd\u003eRemote via XTP\u003c\/td\u003e\n\u003ctd\u003eRemote via HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUS Form Factor\u003c\/td\u003e\n\u003ctd\u003eYes, single-gang\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the difference between the TX130 and TX130-Plus models?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe TX130-Plus adds a second HDMI input port. The base TX130 provides one HDMI and one VGA input. The Plus model is the better choice for rooms where two HDMI sources (such as a laptop and a video conferencing system) need to connect at the same table or wall point.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eDoes this wallplate require its own power supply?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. The WP-UMX-TPS-TX130-Plus-US is remotely powered via the HDBaseT cable from the receiving end, typically a Lightware UMX matrix or TPS receiver. No local power connection at the wall is required.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat cable type is required for HDBaseT transmission?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCAT5e or CAT6 unshielded or shielded twisted pair cable is required. For distances approaching 100 meters, CAT6 is recommended to maintain signal integrity. Termination quality significantly affects performance at longer runs.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this compatible with non-Lightware HDBaseT receivers?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe unit uses the HDBaseT standard and will interoperate with other HDBaseT-compliant receivers at a basic level. However, UMX matrix integration, RS-232 pass-through behavior, and control features are optimized for Lightware receiving equipment.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan the VGA and HDMI sources be switched from the wallplate?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eSource switching is typically controlled from the Lightware UMX matrix or a connected control system. Physical source selection behavior at the faceplate depends on the matrix configuration and system design.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs the white finish compatible with standard US electrical boxes?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The WP-UMX-TPS-TX130-Plus-US is designed for US single-gang electrical boxes and is compatible with standard US faceplate mounting hardware.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase this product?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe WP-UMX-TPS-TX130-Plus-US White is available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware reseller serving commercial AV integrators in North America.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974413123820,"sku":"91540072","price":2392.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-wp-umx-tps-tx130-plus-us-white-umx-series-tps-hdbasettm-wallplate-for-vga-and-hdmi-91540072-creation-networks-53803.jpg?v=1757925343"},{"product_id":"lightware-fp-umx-tps-tx120-universal-two-input-tps-hdbasettm-transmitter-with-event-manager-room-control-91540073","title":"Lightware FP-UMX-TPS-TX120 Universal Two-Input TPS (HDBaseTTM) Transmitter with Event Manager Room Control - 91540073 (Discontinued)","description":"\u003cp data-mce-fragment=\"1\"\u003eFP-UMX-TPS-TX120 is a floor panel with \u003cb data-mce-fragment=\"1\"\u003eHDMI and VGA input ports\u003c\/b\u003e, transmitting signals at a \u003cb data-mce-fragment=\"1\"\u003eresolution of up to 4K\u003c\/b\u003e together with audio and control up to a \u003cb data-mce-fragment=\"1\"\u003erange of 170 m\u003c\/b\u003e over a single CAT5 or better class cable.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis transmitter was \u003cb data-mce-fragment=\"1\"\u003edesigned for digital and analog video and audio\u003c\/b\u003e signals:\u003cb data-mce-fragment=\"1\"\u003eVGA YprPb and HDMI 1.4 \u003c\/b\u003ewith analog stereo audio from local input or embedded \u003cb data-mce-fragment=\"1\"\u003e7.1 HBR audio\u003c\/b\u003e and also handles \u003cb data-mce-fragment=\"1\"\u003eHDCP encryption\u003c\/b\u003e. Analog signals (both audio and video) are converted to a digital format and can be transmitted separately.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUsing the factory, custom or transparent EDID emulation, the user can fix and lock EDID data on each input connector. \u003cb data-mce-fragment=\"1\"\u003eAdvanced EDID Management\u003c\/b\u003e forces the required resolution from any video source and fixes the output format conforming to the system requirements.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe unit offers \u003cb data-mce-fragment=\"1\"\u003ebi-directional and transparent IR, RS-232 and Ethernet\u003c\/b\u003e transmission. IR and RS-232 connections support command injection, allowing the sending of any IR or RS-232 control command directly via the LAN connection.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eRemote powering\u003c\/b\u003e is available through the single CAT cable, but local power supply can also be used. The device can be mounted on a rack shelf or used standalone. The device is compatible with both HDBaseT\u003csup data-mce-fragment=\"1\"\u003eTM\u003c\/sup\u003e extenders and matrix boards.\u003c\/p\u003e\n\u003cdiv class=\"product highlighted-attributes\"\u003e\n\u003ch4 class=\"highlighted-title\"\u003eHighlighted features\u003c\/h4\u003e\n\u003cul class=\"highlighted-list\"\u003e\n\u003cli class=\"highlighted-item\"\u003eBuilt-in Event Manager control automation feature\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003e1920x1080@120Hz\/4:4:4, 4096x2160@30Hz\/4:4:4 or 60Hz\/4:2:0 maximum resolutions (300MHz)\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eExtends VGA, DVI or HDMI 1.4 + Audio + Ethernet + RS-232 + IR over one CAT5\/6\/7 cable\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eAudio embedding (or replace original audio)\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eEthernet extension (100 Mbps)\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eCommand injection on RS-232 and IR ports\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eBi-directional RS-232 and IR extension (pass-through and control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ctable cellpadding=\"0\" cellspacing=\"0\" border=\"0\" style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"746\" colspan=\"2\" class=\"xl63\"\u003eSpecifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eResolution:\u003c\/td\u003e\n\u003ctd\u003e Up to 4K UHD 3840×2160@30Hz, 1600x1200@60Hz, FullHD 1920x1080@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eDigital audio formats:\u003c\/td\u003e\n\u003ctd\u003e Supports up to 8 channel PCM, Dolby TrueHD and DTS-HD Master Audio 7.1 formats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eInput cable equalization:\u003c\/td\u003e\n\u003ctd\u003e Automatic max 20 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eEDID emulation: \u003c\/td\u003e\n\u003ctd\u003eYes, Advanced EDID Management\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eEDID memory: \u003c\/td\u003e\n\u003ctd\u003e119 factory preset, 15 user programmable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eVGA to digital conversion: \u003c\/td\u003e\n\u003ctd\u003e0 microseconds delay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eHDCP pass-through: \u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eRS-232 pass-through: \u003c\/td\u003e\n\u003ctd\u003eYes, configurable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eRS-232 (control option): \u003c\/td\u003e\n\u003ctd\u003e4800, 9600, 19200, 38400, 57600, 115200 Baud Rx,Tx (local or through CATx)(default: 57600)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eLocal power: \u003c\/td\u003e\n\u003ctd\u003e2-pole, DC 48V 500mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003ePower over TPS:\u003c\/td\u003e\n\u003ctd\u003e DC 48V 0.25A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003ePower consumption: \u003c\/td\u003e\n\u003ctd\u003e8,5W (typ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eCompliance: \u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eWarranty: \u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable cellpadding=\"0\" cellspacing=\"0\" border=\"0\" style=\"width: 100%;\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"173\"\u003e \u003ccol width=\"573\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"173\" colspan=\"2\"\u003eConnectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eDigital video input: \u003c\/td\u003e\n\u003ctd\u003eHDMI connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eAnalog video input: \u003c\/td\u003e\n\u003ctd\u003eVGA connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eAudio input: \u003c\/td\u003e\n\u003ctd\u003e3.5 mm stereo jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eEthernet:\u003c\/td\u003e\n\u003ctd\u003e 1 x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eControl: \u003c\/td\u003e\n\u003ctd\u003eIR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eTPS output: \u003c\/td\u003e\n\u003ctd\u003e1 x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eSerial port: \u003c\/td\u003e\n\u003ctd\u003e3-pole PHOENIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003ePower: \u003c\/td\u003e\n\u003ctd\u003e2-pole PHOENIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable cellpadding=\"0\" cellspacing=\"0\" border=\"0\" style=\"width: 746px;\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"173\"\u003e \u003ccol width=\"573\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"746\" colspan=\"2\" class=\"xl65\"\u003eAnalog Audio Input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eVolume: \u003c\/td\u003e\n\u003ctd\u003e-96 .. 0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eBalance:\u003c\/td\u003e\n\u003ctd\u003e 0 .. 100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974417907948,"sku":"91540073","price":1425.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-fp-umx-tps-tx120-universal-two-input-tps-hdbasettm-transmitter-with-event-manager-room-control-91540073-discontinued-creation-networks-95504.jpg?v=1757925344"},{"product_id":"lightware-fp-umx-tps-tx130-universal-three-input-tps-hdbasettm-transmitter-with-event-manager-room-control-91540074","title":"Lightware FP-UMX-TPS-TX130 Universal Three-Input TPS (HDBaseTTM) Transmitter with Event Manager Room Control - 91540074 (Discontinued)","description":"\u003cp data-mce-fragment=\"1\"\u003eFP-UMX-TPS-TX130 is a floor panel with \u003cb data-mce-fragment=\"1\"\u003eHDMI, DisplayPort and VGA input ports\u003c\/b\u003e, transmitting signals at a \u003cb data-mce-fragment=\"1\"\u003eresolution of up to 4K\u003c\/b\u003e together with audio and control up to a \u003cb data-mce-fragment=\"1\"\u003erange of 170 m\u003c\/b\u003e over a single CAT5 or better class cable.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis transmitter was \u003cb data-mce-fragment=\"1\"\u003edesigned for digital and analog video and audio\u003c\/b\u003e signals:\u003cb data-mce-fragment=\"1\"\u003eVGA YprPb, HDMI 1.4 and DP 1.1\u003c\/b\u003e with analog stereo audio from local input or embedded \u003cb data-mce-fragment=\"1\"\u003e7.1 HBR audio\u003c\/b\u003e and also handles \u003cb data-mce-fragment=\"1\"\u003eHDCP encryption\u003c\/b\u003e. Analog signals (both audio and video) are converted to a digital format and can be transmitted separately.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUsing the factory, custom or transparent EDID emulation, the user can fix and lock EDID data on each input connector. \u003cb data-mce-fragment=\"1\"\u003eAdvanced EDID Management\u003c\/b\u003e forces the required resolution from any video source and fixes the output format conforming to the system requirements.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe unit offers \u003cb data-mce-fragment=\"1\"\u003ebi-directional and transparent IR, RS-232 and Ethernet\u003c\/b\u003e transmission. IR and RS-232 connections support command injection, allowing the sending of any IR or RS-232 control command directly via the LAN connection.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eRemote powering\u003c\/b\u003e is available through the single CAT cable, but local power supply can also be used. The device can be mounted on a rack shelf or used standalone. The device is compatible with both HDBaseT\u003csup data-mce-fragment=\"1\"\u003eTM\u003c\/sup\u003e extenders and matrix boards.\u003c\/p\u003e\n\u003cdiv class=\"product highlighted-attributes\"\u003e\n\u003ch4 class=\"highlighted-title\"\u003eHighlighted features\u003c\/h4\u003e\n\u003cul class=\"highlighted-list\"\u003e\n\u003cli class=\"highlighted-item\"\u003eBuilt-in Event Manager control automation feature\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003e1920x1080@120Hz\/4:4:4, 4096x2160@30Hz\/4:4:4 or 60Hz\/4:2:0 maximum resolutions (300MHz)\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eAudio embedding (or replace original audio)\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eEthernet extension (100 Mbps)\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eCommand injection on RS-232 and IR ports\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eExtends VGA, DVI, HDMI 1.4 or DP 1.1 + Audio + Ethernet + RS-232 + IR over one CAT5\/6\/7 cable\u003c\/li\u003e\n\u003cli class=\"highlighted-item\"\u003eBi-directional RS-232 and IR extension (pass-through and control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ctable cellpadding=\"0\" cellspacing=\"0\" border=\"0\" style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"746\" colspan=\"2\" class=\"xl63\"\u003eSpecifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eResolution:\u003c\/td\u003e\n\u003ctd\u003e Up to 4K UHD 3840×2160@30Hz, 1600x1200@60Hz, FullHD 1920x1080@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eDigital audio formats:\u003c\/td\u003e\n\u003ctd\u003e Supports up to 8 channel PCM, Dolby TrueHD and DTS-HD Master Audio 7.1 formats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eInput cable equalization:\u003c\/td\u003e\n\u003ctd\u003e Automatic max 20 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eEDID emulation: \u003c\/td\u003e\n\u003ctd\u003eYes, Advanced EDID Management\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eEDID memory: \u003c\/td\u003e\n\u003ctd\u003e119 factory preset, 15 user programmable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eVGA to digital conversion: \u003c\/td\u003e\n\u003ctd\u003e0 microseconds delay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eHDCP pass-through: Yes\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eRS-232 pass-through: \u003c\/td\u003e\n\u003ctd\u003eYes, configurable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eRS-232 (control option): \u003c\/td\u003e\n\u003ctd\u003e4800, 9600, 19200, 38400, 57600, 115200 Baud Rx,Tx (local or through CATx)(default: 57600)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eLocal power: \u003c\/td\u003e\n\u003ctd\u003e2-pole, DC 48V 500mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003ePower over TPS:\u003c\/td\u003e\n\u003ctd\u003e DC 48V 0.25A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003ePower consumption: \u003c\/td\u003e\n\u003ctd\u003e8,5W (typ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eCompliance: \u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eWarranty: \u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable cellpadding=\"0\" cellspacing=\"0\" border=\"0\" style=\"width: 100%;\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"173\"\u003e \u003ccol width=\"573\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"173\" colspan=\"2\"\u003eConnectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eDigital video input: \u003c\/td\u003e\n\u003ctd\u003eHDMI connector, DisplayPort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eAnalog video input: \u003c\/td\u003e\n\u003ctd\u003eVGA connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eAudio input: \u003c\/td\u003e\n\u003ctd\u003e3.5 mm stereo jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eEthernet:\u003c\/td\u003e\n\u003ctd\u003e 1 x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eControl: \u003c\/td\u003e\n\u003ctd\u003eIR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eTPS output: \u003c\/td\u003e\n\u003ctd\u003e1 x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eSerial port: \u003c\/td\u003e\n\u003ctd\u003e3-pole PHOENIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003ePower: \u003c\/td\u003e\n\u003ctd\u003e2-pole PHOENIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable cellpadding=\"0\" cellspacing=\"0\" border=\"0\" style=\"width: 746px;\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"173\"\u003e \u003ccol width=\"573\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"746\" colspan=\"2\" class=\"xl65\"\u003eAnalog Audio Input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eVolume: \u003c\/td\u003e\n\u003ctd\u003e-96 .. 0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\"\u003eBalance:\u003c\/td\u003e\n\u003ctd\u003e 0 .. 100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974419644652,"sku":"91540074","price":1750.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-fp-umx-tps-tx130-universal-three-input-tps-hdbasettm-transmitter-with-event-manager-room-control-91540074-discontinued-creation-networks-47740.jpg?v=1757925346"},{"product_id":"lightware-fp-umx-tps-mkm-kit-universal-three-input-tps-hdbasettm-transmitter-with-event-manager-room-control-91540102","title":"Lightware FP-UMX-TPS MKM kit FP mounting kit - 91340029-KIT01 (Discontinued)","description":"\u003cp data-mce-fragment=\"1\"\u003eFP-UMX-TPS-TX120 is a floor panel with \u003cb data-mce-fragment=\"1\"\u003eHDMI and VGA input ports\u003c\/b\u003e, transmitting signals at a \u003cb data-mce-fragment=\"1\"\u003eresolution of up to 4K\u003c\/b\u003e together with audio and control up to a \u003cb data-mce-fragment=\"1\"\u003erange of 170 m\u003c\/b\u003e over a single CAT5 or better class cable.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis transmitter was \u003cb data-mce-fragment=\"1\"\u003edesigned for digital and analog video and audio\u003c\/b\u003e signals:\u003cb data-mce-fragment=\"1\"\u003eVGA YprPb and HDMI 1.4 \u003c\/b\u003ewith analog stereo audio from local input or embedded \u003cb data-mce-fragment=\"1\"\u003e7.1 HBR audio\u003c\/b\u003e and also handles \u003cb data-mce-fragment=\"1\"\u003eHDCP encryption\u003c\/b\u003e. Analog signals (both audio and video) are converted to a digital format and can be transmitted separately.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUsing the factory, custom or transparent EDID emulation, the user can fix and lock EDID data on each input connector. \u003cb data-mce-fragment=\"1\"\u003eAdvanced EDID Management\u003c\/b\u003e forces the required resolution from any video source and fixes the output format conforming to the system requirements.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe unit offers \u003cb data-mce-fragment=\"1\"\u003ebi-directional and transparent IR, RS-232 and Ethernet\u003c\/b\u003e transmission. IR and RS-232 connections support command injection, allowing the sending of any IR or RS-232 control command directly via the LAN connection.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eRemote powering\u003c\/b\u003e is available through the single CAT cable, but local power supply can also be used. The device can be mounted on a rack shelf or used standalone. The device is compatible with both HDBaseT\u003csup data-mce-fragment=\"1\"\u003eTM\u003c\/sup\u003e extenders and matrix boards.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eSelect Your Mounting Kit\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis device can be installed \u003cb data-mce-fragment=\"1\"\u003econforming various floor panel standards\u003c\/b\u003e by using the available mounting kits. Depending on which standard users intend to apply, this product is delivered with the selected mounting kit. The table below contains the available mounting kits and their SKU order numbers:\u003c\/p\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974427607276,"sku":"91340029-KIT01","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-fp-umx-tps-mkm-kit-fp-mounting-kit-91340029-kit01-discontinued-creation-networks-23863.jpg?v=1757925348"},{"product_id":"lightware-fp-umx-tps-mks-kit-fp-mounting-kit-91340029-kit02","title":"Lightware FP-UMX-TPS MKS kit FP mounting kit - 91340029-KIT02 (Discontinued)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFP-UMX-TPS-TX120-MKS\u003c\/span\u003e is a floor panel with \u003cb data-mce-fragment=\"1\"\u003eHDMI and VGA input ports\u003c\/b\u003e, transmitting signals at a \u003cb data-mce-fragment=\"1\"\u003eresolution of up to 4K\u003c\/b\u003e together with audio and control up to a \u003cb data-mce-fragment=\"1\"\u003erange of 170 m\u003c\/b\u003e over a single CAT5 or better class cable.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis transmitter was \u003cb data-mce-fragment=\"1\"\u003edesigned for digital and analog video and audio\u003c\/b\u003e signals:\u003cb data-mce-fragment=\"1\"\u003eVGA YprPb and HDMI 1.4 \u003c\/b\u003ewith analog stereo audio from local input or embedded \u003cb data-mce-fragment=\"1\"\u003e7.1 HBR audio\u003c\/b\u003e and also handles \u003cb data-mce-fragment=\"1\"\u003eHDCP encryption\u003c\/b\u003e. Analog signals (both audio and video) are converted to a digital format and can be transmitted separately.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUsing the factory, custom or transparent EDID emulation, the user can fix and lock EDID data on each input connector. \u003cb data-mce-fragment=\"1\"\u003eAdvanced EDID Management\u003c\/b\u003e forces the required resolution from any video source and fixes the output format conforming to the system requirements.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe unit offers \u003cb data-mce-fragment=\"1\"\u003ebi-directional and transparent IR, RS-232 and Ethernet\u003c\/b\u003e transmission. IR and RS-232 connections support command injection, allowing the sending of any IR or RS-232 control command directly via the LAN connection.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eRemote powering\u003c\/b\u003e is available through the single CAT cable, but local power supply can also be used. The device can be mounted on a rack shelf or used standalone. The device is compatible with both HDBaseT\u003csup data-mce-fragment=\"1\"\u003eTM\u003c\/sup\u003e extenders and matrix boards.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eSelect Your Mounting Kit\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompatible with MK CableLink Plus Screed, Single Pan Boxes, Onix Plus Screeded Floor system versions. Depending on which standard users intend to apply, this product is delivered with the selected mounting kit. The table below contains the available mounting kits and their SKU order numbers:\u003c\/span\u003e\u003c\/p\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974436520172,"sku":"91340029-KIT02","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-fp-umx-tps-mks-kit-fp-mounting-kit-91340029-kit02-discontinued-creation-networks-38991.jpg?v=1757925356"},{"product_id":"lightware-fp-umx-tps-ges4-kit-fp-mounting-kit-91340029-kit03","title":"Lightware FP-UMX-TPS-GES4 kit FP mounting kit - 91340029-KIT03 (Discontinued)","description":"\u003cp data-mce-fragment=\"1\"\u003eFP-UMX-TPS-TX120-GES4 is a floor panel with \u003cb data-mce-fragment=\"1\"\u003eHDMI and VGA input ports\u003c\/b\u003e, transmitting signals at a \u003cb data-mce-fragment=\"1\"\u003eresolution of up to 4K\u003c\/b\u003e together with audio and control up to a \u003cb data-mce-fragment=\"1\"\u003erange of 170 m\u003c\/b\u003e over a single CAT5 or better class cable.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis transmitter was \u003cb data-mce-fragment=\"1\"\u003edesigned for digital and analog video and audio\u003c\/b\u003e signals:\u003cb data-mce-fragment=\"1\"\u003eVGA YprPb and HDMI 1.4 \u003c\/b\u003ewith analog stereo audio from local input or embedded \u003cb data-mce-fragment=\"1\"\u003e7.1 HBR audio\u003c\/b\u003e and also handles \u003cb data-mce-fragment=\"1\"\u003eHDCP encryption\u003c\/b\u003e. Analog signals (both audio and video) are converted to a digital format and can be transmitted separately.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUsing the factory, custom or transparent EDID emulation, the user can fix and lock EDID data on each input connector. \u003cb data-mce-fragment=\"1\"\u003eAdvanced EDID Management\u003c\/b\u003e forces the required resolution from any video source and fixes the output format conforming to the system requirements.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe unit offers \u003cb data-mce-fragment=\"1\"\u003ebi-directional and transparent IR, RS-232 and Ethernet\u003c\/b\u003e transmission. IR and RS-232 connections support command injection, allowing the sending of any IR or RS-232 control command directly via the LAN connection.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eRemote powering\u003c\/b\u003e is available through the single CAT cable, but local power supply can also be used. The device can be mounted on a rack shelf or used standalone. The device is compatible with both HDBaseT\u003csup data-mce-fragment=\"1\"\u003eTM\u003c\/sup\u003e extenders and matrix boards.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eSelect Your Mounting Kit\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompatible with OBO Bettermann GES4, GES6, GESR4, GESR7, UDHOME4 versions. Depending on which standard users intend to apply, this product is delivered with the selected mounting kit. The table below contains the available mounting kits and their SKU order numbers:\u003c\/span\u003e\u003c\/p\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974438256876,"sku":"91340029-KIT03","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-fp-umx-tps-ges4-kit-fp-mounting-kit-91340029-kit03-discontinued-creation-networks-72121.jpg?v=1757925358"},{"product_id":"lightware-fp-umx-tps-ges9-kit-fp-mounting-kit-91340029-kit04","title":"Lightware FP-UMX-TPS GES9 kit FP mounting kit - 91340029-KIT04 (Discontinued)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFP-UMX-TPS-TX130-GES9\u003c\/span\u003e is a floor panel with \u003cb data-mce-fragment=\"1\"\u003eHDMI, DisplayPort and VGA input ports\u003c\/b\u003e, transmitting signals at a \u003cb data-mce-fragment=\"1\"\u003eresolution of up to 4K\u003c\/b\u003e together with audio and control up to a \u003cb data-mce-fragment=\"1\"\u003erange of 170 m\u003c\/b\u003e over a single CAT5 or better class cable.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis transmitter was \u003cb data-mce-fragment=\"1\"\u003edesigned for digital and analog video and audio\u003c\/b\u003e signals:\u003cb data-mce-fragment=\"1\"\u003eVGA YprPb, HDMI 1.4 and DP 1.1\u003c\/b\u003e with analog stereo audio from local input or embedded \u003cb data-mce-fragment=\"1\"\u003e7.1 HBR audio\u003c\/b\u003e and also handles \u003cb data-mce-fragment=\"1\"\u003eHDCP encryption\u003c\/b\u003e. Analog signals (both audio and video) are converted to a digital format and can be transmitted separately.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUsing the factory, custom or transparent EDID emulation, the user can fix and lock EDID data on each input connector. \u003cb data-mce-fragment=\"1\"\u003eAdvanced EDID Management\u003c\/b\u003e forces the required resolution from any video source and fixes the output format conforming to the system requirements.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe unit offers \u003cb data-mce-fragment=\"1\"\u003ebi-directional and transparent IR, RS-232 and Ethernet\u003c\/b\u003e transmission. IR and RS-232 connections support command injection, allowing the sending of any IR or RS-232 control command directly via the LAN connection.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eRemote powering\u003c\/b\u003e is available through the single CAT cable, but local power supply can also be used. The device can be mounted on a rack shelf or used standalone. The device is compatible with both HDBaseT\u003csup data-mce-fragment=\"1\"\u003eTM\u003c\/sup\u003e extenders and matrix boards.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eSelect Your Mounting Kit\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompatible with OBO Bettermann GES9, GESR9, UDHOME9 versions. Depending on which standard users intend to apply, this product is delivered with the selected mounting kit. The table below contains the available mounting kits and their SKU order numbers:\u003c\/span\u003e\u003c\/p\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974442418412,"sku":"91340029-KIT04","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-fp-umx-tps-ges9-kit-fp-mounting-kit-91340029-kit04-discontinued-creation-networks-16440.jpg?v=1757925360"},{"product_id":"lightware-tps-pi-1p1-single-port-standalone-tps-power-injector-91340010","title":"Lightware TPS-PI-1P1 Single Port Standalone TPS Power Injector -  91340010","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware TPS-PI-1P1 is a single-port, standalone TPS (Twisted Pair Signal) power injector designed to deliver remote powering to Lightware TPS receivers over a single Cat cable. It eliminates the need to run a separate power circuit to remote display locations, supporting structured cable AV deployments in boardrooms, classrooms, and multi-room installations. Available from Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-tps-pi-1p1-single-port-standalone-tps-power-injector-91340010-creation-networks-68466.jpg?v=1757925362\" alt=\"Lightware TPS-PI-1P1 Single Port TPS Power Injector front view\" style=\"max-width:100%;height:auto;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-tps-pi-1p1-single-port-standalone-tps-power-injector-91340010-creation-networks-48118.jpg?v=1757925363\" alt=\"Lightware TPS-PI-1P1 Single Port TPS Power Injector rear connections\" style=\"max-width:100%;height:auto;\"\u003e\u003cp\u003eIn Lightware TPS systems, HDBaseT or proprietary TPS signals travel over Cat5e\/6 structured cabling to remote receivers. The TPS-PI-1P1 injects DC power into that same cable run, powering the remote device without a local power outlet at the endpoint. This is the single-port variant: one Cat input from the TPS transmitter or switcher, one Cat output toward the receiver, with inline power injection happening transparently.\u003c\/p\u003e\u003cp\u003eThe unit is standalone — it sits outside the rack on a desk or mounts near a cable tray junction — and requires only mains power at its location. Its compact form factor makes it practical for under-table or above-ceiling placement at cable termination points.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-tps-pi-1p1-single-port-standalone-tps-power-injector-91340010-creation-networks-71418.jpg?v=1757925364\" alt=\"Lightware TPS-PI-1P1 installation example\" style=\"max-width:100%;height:auto;\"\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSingle-port TPS power injection over Cat5e\/6 structured cabling\u003c\/li\u003e\n\u003cli\u003eStandalone form factor — no rack required\u003c\/li\u003e\n\u003cli\u003eTransparent inline operation — no signal processing or latency\u003c\/li\u003e\n\u003cli\u003ePowers remote Lightware TPS receivers over the same cable as the AV signal\u003c\/li\u003e\n\u003cli\u003eEliminates need for local power at remote display locations\u003c\/li\u003e\n\u003cli\u003eCompatible with Lightware TPS transmitters and matrix switchers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardrooms: powering a TPS receiver at a display wall from a rack-mounted switcher\u003c\/li\u003e\n\u003cli\u003eClassroom AV: remote powering of wall-plate receivers without outlet access above ceiling\u003c\/li\u003e\n\u003cli\u003eHospitality: in-room TPS endpoints powered from a corridor or riser cabinet\u003c\/li\u003e\n\u003cli\u003eMuseum and retail digital signage: powering display-side receivers at kiosk locations\u003c\/li\u003e\n\u003cli\u003eCorporate campus: structured cabling AV deployments with centralized sources\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTPS-PI-1P1 (91340010)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Count\u003c\/td\u003e\n\u003ctd\u003e1 (single port)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eRJ45 (TPS\/Cat5e\/6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eInline TPS power injector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eStandalone desktop\/surface mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Input\u003c\/td\u003e\n\u003ctd\u003eUniversal mains (100–240V AC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Systems\u003c\/td\u003e\n\u003ctd\u003eLightware TPS transmitters, matrix switchers, TPS receivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware TPS-PI-1P1\u003c\/th\u003e\n\u003cth\u003eGeneric HDBaseT PoH Injector\u003c\/th\u003e\n\u003cth\u003eExtron XTP PI 100\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEcosystem Compatibility\u003c\/td\u003e\n\u003ctd\u003eNative Lightware TPS — guaranteed compatibility with Lightware switchers and receivers\u003c\/td\u003e\n\u003ctd\u003eVaries by manufacturer; may not interoperate with proprietary TPS signals\u003c\/td\u003e\n\u003ctd\u003eExtron XTP ecosystem only; not compatible with Lightware TPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Transparency\u003c\/td\u003e\n\u003ctd\u003eFully transparent — no processing, no added latency\u003c\/td\u003e\n\u003ctd\u003eGenerally transparent but unverified with Lightware hardware\u003c\/td\u003e\n\u003ctd\u003eTransparent within XTP ecosystem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eStandalone — flexible placement near cable terminations\u003c\/td\u003e\n\u003ctd\u003eVaries — some require rack mount\u003c\/td\u003e\n\u003ctd\u003eRack-mountable; requires Extron rack infrastructure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Count\u003c\/td\u003e\n\u003ctd\u003e1 — purpose-built for single-endpoint deployments\u003c\/td\u003e\n\u003ctd\u003eTypically 1–4 ports depending on model\u003c\/td\u003e\n\u003ctd\u003eSingle port per unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommercial Support\u003c\/td\u003e\n\u003ctd\u003eLightware commercial warranty via Creation Networks\u003c\/td\u003e\n\u003ctd\u003eNo dedicated AV commercial support\u003c\/td\u003e\n\u003ctd\u003eExtron commercial support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration Required\u003c\/td\u003e\n\u003ctd\u003eNone — plug and inject\u003c\/td\u003e\n\u003ctd\u003eUsually none\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat TPS receivers is this compatible with?\u003c\/dt\u003e\n\u003cdd\u003eThe TPS-PI-1P1 is designed for use within the Lightware TPS ecosystem. It is compatible with Lightware TPS receivers and systems that support remote powering over Cat cable.\u003c\/dd\u003e\n\u003cdt\u003eCan this power injector be used with standard HDBaseT devices from other brands?\u003c\/dt\u003e\n\u003cdd\u003eThe TPS-PI-1P1 is optimized for Lightware TPS infrastructure. Compatibility with third-party HDBaseT devices is not guaranteed and should be confirmed with Lightware technical support before deployment.\u003c\/dd\u003e\n\u003cdt\u003eDoes the power injector affect signal quality or introduce latency?\u003c\/dt\u003e\n\u003cdd\u003eNo. The TPS-PI-1P1 is fully transparent. It injects power onto the cable without processing the AV signal, adding no latency or signal degradation.\u003c\/dd\u003e\n\u003cdt\u003eDoes it require rack mounting?\u003c\/dt\u003e\n\u003cdd\u003eNo. The TPS-PI-1P1 is a standalone unit. It can be placed on a desk, mounted under a table, or secured in a ceiling void near the cable termination point.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable category is required?\u003c\/dt\u003e\n\u003cdd\u003eCat5e or Cat6 structured cabling. Shielded cabling (STP\/FTP) is recommended in electrically noisy environments.\u003c\/dd\u003e\n\u003cdt\u003eIs this the same as a PoE injector?\u003c\/dt\u003e\n\u003cdd\u003eNo. This is a TPS power injector specific to the Lightware signaling protocol. It is not a standard IEEE 802.3af\/at PoE injector and should not be used as a substitute for standard PoE applications.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43974453297388,"sku":"91340010","price":594.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-tps-pi-1p1-single-port-standalone-tps-power-injector-91340010-creation-networks-68466.jpg?v=1757925362"},{"product_id":"lightware-mmx2-4x1-h20-hdmi-2-0-switcher-with-breakout-audio-occupancy-sensor-input-and-various-control-features-91560007","title":"Lightware MMX4x2-HT200 4x2 Matrix Switcher with TPS and HDMI Inputs and Breakaway Analog Audio - 91310035","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Lightware MMX4x2-HT200 is a compact 4x2 matrix switcher designed for conference rooms, classrooms, and control rooms where space is limited but signal routing flexibility is required. It accepts three HDMI inputs and one HDBaseT-compatible TPS input, routing any source to two independent HDMI outputs simultaneously. Full 4K\/UHD support, HDCP compliance, and onboard audio breakaway make it a practical single-enclosure solution for small-to-mid scale AV distribution.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe MMX4x2-HT200 occupies a minimal footprint — 221 x 100.4 x 26 mm — while delivering the switching capability of a full matrix system. Three HDMI inputs cover the typical mix of laptops, media players, and codec outputs found at a conference table or instructor station. The single TPS input accepts long-cable runs via HDBaseT-compatible CAT cable up to 170 m in Long Reach mode, connecting remote sources without an additional receiver at the matrix.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx4x2-ht200-4x2-matrix-switcher-with-tps-and-hdmi-inputs-and-breakaway-analog-audio-91310035-creation-networks-88074.jpg?v=1757925473\" alt=\"Lightware MMX4x2-HT200 4x2 Matrix Switcher front panel\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e\n\u003cp\u003eBreakaway analog audio is handled through 5-pole Phoenix connectors for both input and output, allowing the unit to embed external audio into the HDMI stream or de-embed HDMI audio to a DSP or amplifier independently of the video routing. Volume and gain are adjustable per input and per output through software. The built-in Event Manager, configured via Lightware Device Controller software, enables rules-based automation — automatic source switching on HDMI hot-plug, display power commands over CEC, and third-party device control via RS-232 or IR. Control interfaces include USB, RS-232, IR (in and out), and Ethernet, covering both local and network-based control systems.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4x2 matrix routing\u003c\/strong\u003e — three HDMI inputs plus one TPS input to two independent HDMI outputs with breakaway switching\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHDBaseT-compatible TPS input\u003c\/strong\u003e — accepts signals over CAT5e\/CAT7 at distances up to 170 m (Long Reach mode, signals up to 148.5 MHz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4K\/UHD support\u003c\/strong\u003e — handles resolutions up to 3840x2160@30Hz and 4096x2160@30Hz with HDCP compliance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBreakaway analog audio\u003c\/strong\u003e — independent 5-pole Phoenix audio input (embed) and output (de-embed), adjustable volume and gain per port\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdvanced EDID Management\u003c\/strong\u003e — 120 factory EDID presets plus 12 user-programmable slots, locks source output to system-compatible formats\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt-in Event Manager\u003c\/strong\u003e — configurable automation rules via Lightware Device Controller, no external control processor required for simple tasks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCEC control\u003c\/strong\u003e — receives and transmits CEC commands on HDMI ports for display power and input switching\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRS-232 pass-through\u003c\/strong\u003e — configurable baud rates 9600–115200, supports Cisco Room Kit and other codec serial control\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIR extension\u003c\/strong\u003e — 3.5 mm IR in\/out ports with HEX code support for third-party device control\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact metal enclosure\u003c\/strong\u003e — 1 mm steel chassis, 10 W max power draw, powered by external 12V\/2A DC supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConference and meeting rooms with multiple presenter inputs and dual display outputs\u003c\/li\u003e\n  \u003cli\u003eClassrooms requiring instructor station switching with remote source connection over TPS\u003c\/li\u003e\n  \u003cli\u003eControl rooms with breakaway audio distribution to separate audio systems\u003c\/li\u003e\n  \u003cli\u003eHome cinema installations needing compact multi-source routing\u003c\/li\u003e\n  \u003cli\u003eHuddle spaces with automated display power through Event Manager and CEC\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003eVideo\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e3x HDMI, 1x HDBaseT TPS (RJ45)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e2x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K UHD 3840x2160@30Hz, 4096x2160@30Hz, 1920x1080@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Pixel Clock\u003c\/td\u003e\n\u003ctd\u003e297 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003eTPS Cable Distance\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e1080p@60Hz \/ CAT5e AWG24\u003c\/td\u003e\n\u003ctd\u003e100 m (Auto) \/ 130 m (Long Reach)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e4K@30Hz \/ CAT5e AWG24\u003c\/td\u003e\n\u003ctd\u003e70 m\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e4K@30Hz \/ CAT7 AWG23\u003c\/td\u003e\n\u003ctd\u003e100 m\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003eAudio\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDigital Audio\u003c\/td\u003e\n\u003ctd\u003eUp to 8-ch PCM, Dolby TrueHD, DTS-HD Master Audio 7.1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog Audio Input\u003c\/td\u003e\n\u003ctd\u003e5-pole Phoenix; volume -96 to 0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog Audio Output\u003c\/td\u003e\n\u003ctd\u003e5-pole Phoenix; volume -57 to +3 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003eControl\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e1x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRS-232\u003c\/td\u003e\n\u003ctd\u003e3-pole Phoenix; 9600–115200 Baud\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003eMini-USB-B\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIR\u003c\/td\u003e\n\u003ctd\u003e3.5 mm jack (in + out)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth colspan=\"2\" style=\"background:#f2f2f2;\"\u003ePhysical\u003c\/th\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e221 W x 100.4 D x 26 H mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e12V DC, 2A external supply; 10 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003e1 mm steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEDID Memory\u003c\/td\u003e\n\u003ctd\u003e120 factory preset, 12 user programmable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background:#f2f2f2;\"\u003e\n      \u003cth\u003eCriteria\u003c\/th\u003e\n      \u003cth\u003eLightware MMX4x2-HT200\u003c\/th\u003e\n      \u003cth\u003eExtron SW4 HDMI\u003c\/th\u003e\n      \u003cth\u003eKramer VS-41H2\u003c\/th\u003e\n      \u003cth\u003eAtlona AT-UHD-SW-52\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput count\u003c\/td\u003e\n\u003ctd\u003e4 (3x HDMI + 1x TPS)\u003c\/td\u003e\n\u003ctd\u003e4x HDMI only\u003c\/td\u003e\n\u003ctd\u003e4x HDMI only\u003c\/td\u003e\n\u003ctd\u003e5x HDMI only\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTPS\/HDBaseT input\u003c\/td\u003e\n\u003ctd\u003eYes — accepts remote sources over CATx, up to 170 m\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput count\u003c\/td\u003e\n\u003ctd\u003e2 independent (matrix)\u003c\/td\u003e\n\u003ctd\u003e1 (switcher)\u003c\/td\u003e\n\u003ctd\u003e1 (switcher)\u003c\/td\u003e\n\u003ctd\u003e1 (switcher)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax resolution\u003c\/td\u003e\n\u003ctd\u003e4K@30Hz \/ 1080p@60Hz\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBreakaway analog audio\u003c\/td\u003e\n\u003ctd\u003eYes — embed and de-embed, adjustable gain\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eDe-embed only\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOnboard automation\u003c\/td\u003e\n\u003ctd\u003eEvent Manager with CEC, RS-232, IR rules\u003c\/td\u003e\n\u003ctd\u003eBasic triggers\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eBasic RS-232 commands\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEDID management\u003c\/td\u003e\n\u003ctd\u003eAdvanced, 132 slots\u003c\/td\u003e\n\u003ctd\u003eBasic\u003c\/td\u003e\n\u003ctd\u003eBasic\u003c\/td\u003e\n\u003ctd\u003eBasic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eForm factor\u003c\/td\u003e\n\u003ctd\u003eMini, desktop\/shelf\u003c\/td\u003e\n\u003ctd\u003e1U half-rack\u003c\/td\u003e\n\u003ctd\u003eDesktop\u003c\/td\u003e\n\u003ctd\u003eDesktop\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003e\u003cstrong\u003eCan the TPS input receive power from a compatible TPS transmitter?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe MMX4x2-HT200 TPS input is an HDBaseT-compatible receive port. Power over HDBaseT (PoH) delivery from the matrix to a remote transmitter depends on whether the installed transmitter supports remote powering. Check the transmitter spec sheet for PoH sourcing capability before relying on this feature.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eCan I route audio independently from video on both outputs?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eYes. The breakaway analog audio input can be embedded into either HDMI output stream independently of the video route. The analog audio output de-embeds from whichever source is routed to that output, or can follow a separate audio path if configured in Lightware Device Controller.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eWhat control systems are compatible?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe MMX4x2-HT200 supports control via Ethernet (LAN API), RS-232 (3-pole Phoenix), USB, and IR. It is compatible with Crestron, AMX, Extron, and other control processors that communicate via TCP\/IP or RS-232 using Lightware's published API protocol.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eDoes the Event Manager require programming expertise?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eNo. The Event Manager is configured graphically through Lightware Device Controller software. Basic rules — such as \"switch to input 2 when HDMI hot-plug detected\" or \"send CEC power-on when any source goes live\" — can be set up without scripting knowledge.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eIs this device compatible with Lightware modular matrix frames?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe MMX4x2-HT200 is a standalone unit and is not a board for insertion into an MX or 25G frame. It is compatible with Lightware TPS transmitters including the HDMI-TPS-TX200 series, UMX-TPS-TX100 series, and SW4-TPS-TX240 series on the TPS input port.\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eWhat is the maximum 4K cable distance over TPS?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eAt 4K UHD (297 MHz pixel clock), the maximum TPS cable distance is 70 m on CAT5e AWG24 or CAT7 AWG26, and 100 m on CAT7 AWG23 cable. Long Reach mode only extends distances for signals up to 148.5 MHz (1080p60 and below).\u003c\/dd\u003e\n\n  \u003cdt\u003e\u003cstrong\u003eWhere can I purchase this product with professional support?\u003c\/strong\u003e\u003c\/dt\u003e\n  \u003cdd\u003eThe MMX4x2-HT200 is available at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e, where the team can assist with system design, compatibility verification, and post-sale technical support.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43979631034604,"sku":"91310035","price":2953.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx4x2-ht200-4x2-matrix-switcher-with-tps-and-hdmi-inputs-and-breakaway-analog-audio-91310035-creation-networks-88074.jpg?v=1757925473"},{"product_id":"lightware-mmx6x2-ht200-multiport-hdmi-and-tps-matrix-switcher-91310030","title":"Lightware MMX6x2-HT200 Multiport HDMI and TPS Matrix Switcher - 91310030","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware MMX6x2-HT200 is a compact 6x2 multiport matrix switcher combining four HDMI 1.4 inputs and two HDBaseT (TPS) inputs with two independent HDMI outputs, designed specifically for conference room and classroom AV systems that require local matrix switching with audio flexibility. Supporting 4K UHD at 30Hz, 3D signal formats, and full HDCP compliance, the MMX6x2-HT200 consolidates signal routing, audio de-embedding, and remote powering of TPS endpoints into a single 1RU half-rack unit. Its built-in Event Manager provides programmable automation without a dedicated control system, making it a practical choice for AV integrators deploying cost-efficient room solutions at scale. The unit is available from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e as part of Lightware's MMX6x2-HT series.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe MMX6x2-HT200 accepts signals from four HDMI 1.4 sources and two HDBaseT-connected remote transmitters — all routed to any combination of its two HDMI outputs. The TPS inputs support PoE 48V remote powering over standard CATx cable, eliminating the need for separate power infrastructure at wall-plate transmitter locations. HDBaseT receivers and displays are natively compatible, extending signal distribution up to 170 meters in Long Reach mode on CAT7 cable. The unit's four balanced analog audio inputs allow external microphones or audio sources to be inserted into the video signal, while two balanced analog outputs provide de-embedded audio for connected amplifiers or DSP systems.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx6x2-ht200-multiport-hdmi-and-tps-matrix-switcher-91310030-creation-networks-91388.jpg?v=1757925474\" alt=\"Lightware MMX6x2-HT200 6x2 HDMI HDBaseT Matrix Switcher\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx6x2-ht200-multiport-hdmi-and-tps-matrix-switcher-91310030-creation-networks-25361.jpg?v=1757925475\" alt=\"Lightware MMX6x2-HT200 Rear Panel\"\u003e\u003cp\u003eThe built-in Event Manager executes user-defined actions — crosspoint switches, RS-232 commands, IR commands, and volume changes — in response to system events such as signal detection or resolution changes, enabling autonomous room operation. Configuration cloning via the Lightware Device Controller software allows a single device profile to be replicated across multiple units in a single step, reducing commissioning time for multi-room deployments. The front-panel LCD and button controls provide on-device operation without a control system.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x2 Matrix Crosspoint\u003c\/strong\u003e — Routes any of six inputs (4x HDMI, 2x TPS) to either or both HDMI outputs independently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K UHD @ 30Hz Support\u003c\/strong\u003e — Handles 3840x2160@30Hz and 4096x2160@30Hz alongside 1080p@120Hz and 1600x1200@60Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull 3D Signal Support\u003c\/strong\u003e — Passes frame packing, side-by-side, and top-bottom 3D formats across all ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE 48V on TPS Ports\u003c\/strong\u003e — Powers remote HDBaseT wall-plate transmitters or receivers over CAT cable; no separate power outlet required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDBaseT Extension up to 170m\u003c\/strong\u003e — Long Reach mode extends 1080p signals up to 170m on CAT7 AWG23 cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x Balanced Analog Audio Inputs\u003c\/strong\u003e — Insert external audio sources with independent gain and volume control on each input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x Balanced Analog Audio Outputs\u003c\/strong\u003e — De-embedded stereo audio for amplifiers or DSP, with independent volume and gain control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Event Manager\u003c\/strong\u003e — Automates switching, RS-232 commands, IR control, and volume changes triggered by signal status events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced EDID Management\u003c\/strong\u003e — 119 factory presets and 12 user-programmable EDID profiles; locks source output format to system requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultichannel Audio Support\u003c\/strong\u003e — Passes up to 8-channel PCM, Dolby TrueHD, and DTS-HD Master Audio 7.1 via HDMI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR Command Injection\u003c\/strong\u003e — Send control commands from the LAN port to RS-232 or IR-controlled devices at remote TPS endpoints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration Cloning\u003c\/strong\u003e — Export and replicate device configuration to unlimited MMX6x2-HT200 units via Lightware Device Controller software.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room AV switching and distribution\u003c\/li\u003e\n\u003cli\u003eClassroom and training room presentation systems\u003c\/li\u003e\n\u003cli\u003eBoardroom multi-source video routing\u003c\/li\u003e\n\u003cli\u003eAll-hands room and town hall display systems\u003c\/li\u003e\n\u003cli\u003eHouse of worship presentation and IMAG switching\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrosspoint\u003c\/td\u003e\n\u003ctd\u003e6x2 (any input to any output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Inputs\u003c\/td\u003e\n\u003ctd\u003e4x HDMI 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS (HDBaseT) Inputs\u003c\/td\u003e\n\u003ctd\u003e2x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Outputs\u003c\/td\u003e\n\u003ctd\u003e2x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e3840x2160@30Hz UHD; 4096x2160@30Hz 4K; 1920x1080@120Hz; 1600x1200@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3D Support\u003c\/td\u003e\n\u003ctd\u003eFrame packing, side-by-side, top-bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT Max Distance\u003c\/td\u003e\n\u003ctd\u003e170m (CAT7 AWG23, Long Reach, up to 148.5 MHz pixel clock)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE on TPS Ports\u003c\/td\u003e\n\u003ctd\u003e48V, up to 15W per port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Inputs\u003c\/td\u003e\n\u003ctd\u003e4x 5-pole Phoenix; gain 0–21 dB; volume -95–0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Outputs\u003c\/td\u003e\n\u003ctd\u003e2x 5-pole Phoenix; gain 0–3 dB; volume -57–0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Audio Formats\u003c\/td\u003e\n\u003ctd\u003e8-ch PCM, Dolby TrueHD, DTS-HD Master Audio 7.1, Dolby Digital 2.1\/5.1\/7.1, DTS 7.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Memory\u003c\/td\u003e\n\u003ctd\u003e119 factory presets; 12 user-programmable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232\u003c\/td\u003e\n\u003ctd\u003e3-pole Phoenix; 9600–115200 baud (default 57600)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eEthernet (LAN RJ45), RS-232, USB (Mini USB B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e70W max; 36W typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e482 x 43.9 x 300 mm (with rack ears); 1RU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e100–240V AC; IEC inlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eCE, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware MMX6x2-HT200\u003c\/th\u003e\n\u003cth\u003eCrestron HD-RXC-4KZ-101-C\u003c\/th\u003e\n\u003cth\u003eExtron XTP T UWP 302\u003c\/th\u003e\n\u003cth\u003eKramer TP-590RXR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e6x2 Matrix Switcher (HDMI + HDBaseT)\u003c\/td\u003e\n\u003ctd\u003eHDBaseT Receiver\u003c\/td\u003e\n\u003ctd\u003eHDBaseT Transmitter (wall plate)\u003c\/td\u003e\n\u003ctd\u003eHDBaseT Receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e4x HDMI + 2x TPS (HDBaseT)\u003c\/td\u003e\n\u003ctd\u003e1x HDBaseT in\u003c\/td\u003e\n\u003ctd\u003e1x HDMI + 1x VGA\u003c\/td\u003e\n\u003ctd\u003e1x HDBaseT in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K@30Hz UHD\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz 4:4:4\u003c\/td\u003e\n\u003ctd\u003e4K@60Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio De-embedding\u003c\/td\u003e\n\u003ctd\u003eYes (2x balanced analog out)\u003c\/td\u003e\n\u003ctd\u003eYes (analog out)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes (analog out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Insertion\u003c\/td\u003e\n\u003ctd\u003eYes (4x balanced analog in)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE for Remote Devices\u003c\/td\u003e\n\u003ctd\u003eYes (48V, 15W per TPS port)\u003c\/td\u003e\n\u003ctd\u003eNo (receiver, not PSE)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in Automation\u003c\/td\u003e\n\u003ctd\u003eYes (Event Manager)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003e1RU half-rack standalone matrix\u003c\/td\u003e\n\u003ctd\u003eSurface mount receiver\u003c\/td\u003e\n\u003ctd\u003eWall plate\u003c\/td\u003e\n\u003ctd\u003eSurface mount receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eCan the MMX6x2-HT200 route a single input to both outputs simultaneously?\u003c\/dt\u003e\n\u003cdd\u003eYes. Any input can be routed to either or both HDMI outputs independently. The 6x2 crosspoint matrix allows full any-in to any-out routing including duplication.\u003c\/dd\u003e\n\u003cdt\u003eWhat HDBaseT transmitters are compatible with the TPS inputs?\u003c\/dt\u003e\n\u003cdd\u003eThe unit is compatible with HDBaseT-compliant transmitters and displays. Lightware wall-plate and standalone TPS transmitters are tested and recommended. Non-Lightware HDBaseT devices may work but should be verified.\u003c\/dd\u003e\n\u003cdt\u003eDoes it support audio from external sources like microphones?\u003c\/dt\u003e\n\u003cdd\u003eThe unit accepts balanced analog audio via 5-pole Phoenix connectors on four input channels. Gain adjustment (0–21 dB) allows condenser line-level signals to be inserted. Microphone preamp functionality is not provided; a separate mic preamp is required for microphone inputs.\u003c\/dd\u003e\n\u003cdt\u003eWhat is the Event Manager and does it require programming?\u003c\/dt\u003e\n\u003cdd\u003eThe Event Manager is a built-in rules engine that triggers predefined actions (switching, RS-232 commands, volume changes) based on system status events. Rules are configured via the Lightware Device Controller software and stored in the device; no external control system is required for execution.\u003c\/dd\u003e\n\u003cdt\u003eCan this unit replace a separate audio DSP for simple rooms?\u003c\/dt\u003e\n\u003cdd\u003eFor simple conference rooms requiring only volume control and analog de-embedding, the MMX6x2-HT200’s audio capabilities may be sufficient. Complex audio processing, echo cancellation, or AEC requires a dedicated DSP.\u003c\/dd\u003e\n\u003cdt\u003eWhat is the maximum cable length for HDMI inputs?\u003c\/dt\u003e\n\u003cdd\u003eHDMI input equalization is adaptive and automatic. Standard HDMI cable lengths vary by resolution; at 1080p60, typical passive cable limits apply (5–10m for standard cables). Active HDMI cables extend this range.\u003c\/dd\u003e\n\u003cdt\u003eIs configuration backup and restore supported?\u003c\/dt\u003e\n\u003cdd\u003eYes. The Lightware Device Controller software can export the full device configuration and restore it to the same or any other MMX6x2-HT200, enabling rapid deployment across multiple identical rooms.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43979655905516,"sku":"91310030","price":7012.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx6x2-ht200-multiport-hdmi-and-tps-matrix-switcher-91310030-creation-networks-91388.jpg?v=1757925474"},{"product_id":"lightware-mmx6x2-ht210-multiport-hdmi-and-tps-matrix-switcher-91310031","title":"Lightware MMX6x2-HT210 Multiport HDMI and TPS Matrix Switcher - 91310031","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware MMX6x2-HT210 is a compact standalone matrix switcher providing six inputs (four HDMI 1.4, two HDBaseT TPS) and two independent HDMI outputs with one mirrored HDBaseT TPS output, in a 1U form factor designed for meeting rooms and classroom AV installations. It delivers a 6x2 crosspoint with PoE 48V remote powering, four analog audio inputs, two balanced audio outputs, and a built-in Event Manager — making it a self-contained AV control solution that eliminates the need for an external control processor in straightforward room deployments.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe MMX6x2-HT210 is the mid-tier model of the MMX6x2-HT family, sitting between the HT200 (no TPS output) and HT220 (two TPS outputs). It provides one TPS output in addition to two HDMI outputs, allowing distribution to one remote display over HDBaseT while two local HDMI displays receive the matrix output. Four HDMI 1.4 and two HDBaseT TPS inputs are switchable to any output combination. PoE 48V remote powering is available on all TPS ports, eliminating local power requirements at transmitter locations and reducing cabling infrastructure. The device receives TPS signals from up to 120 meters in standard HDBaseT mode and up to 170 meters in Long Reach mode (Full HD only). Four 5-pole Phoenix analog audio inputs and two balanced audio outputs with adjustable gain and volume support audio insertion and de-embedding for active speaker systems. The built-in Event Manager automates switching, IR commands, RS-232 commands, and volume adjustments in response to signal presence, resolution changes, or input status events — enabling room automation without external control hardware. Configuration cloning via Lightware Device Controller replicates full settings across multiple units in multi-room deployments.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx6x2-ht210-multiport-hdmi-and-tps-matrix-switcher-91310031-creation-networks-46632.jpg?v=1757925477\" alt=\"Lightware MMX6x2-HT210 Matrix Switcher\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx6x2-ht210-multiport-hdmi-and-tps-matrix-switcher-91310031-creation-networks-23809.jpg?v=1757925478\" alt=\"Lightware MMX6x2-HT210 rear panel\"\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x2 crosspoint with one TPS output\u003c\/strong\u003e — Four HDMI + two TPS inputs; two HDMI + one TPS output for local and one remote HDBaseT display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE 48V on all TPS ports\u003c\/strong\u003e — Powers remote TPS transmitters and receivers over CAT cable without separate AC power at each location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e170-meter Long Reach TPS\u003c\/strong\u003e — Full HD signals extend to 170m over CAT7 AWG23; 4K supported up to 100m in standard mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K\/UHD and 3D support\u003c\/strong\u003e — Handles 3840x2160@30Hz, 1600x1200@60Hz, and 1080p@120Hz sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour analog audio inputs\u003c\/strong\u003e — 5-pole Phoenix connectors with adjustable input gain (0–21 dB) for audio insertion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo balanced audio outputs\u003c\/strong\u003e — 5-pole Phoenix balanced outputs with volume control (-57 to 0 dB) for de-embedded audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Event Manager\u003c\/strong\u003e — Automates crosspoint switching, IR, RS-232, and volume in response to signal and status events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration cloning\u003c\/strong\u003e — Full settings cloning to unlimited units via Lightware Device Controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced EDID Management\u003c\/strong\u003e — 119 factory presets and 12 user-programmable EDID slots; per-input EDID lock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-directional RS-232 and IR\u003c\/strong\u003e — Pass-through and command injection for remote display and device control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x16 front panel LCD\u003c\/strong\u003e — Local status display and control buttons for on-site operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP compliant\u003c\/strong\u003e — Full HDCP support on all HDMI and TPS ports.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eClassroom\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91310031\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Crosspoint\u003c\/td\u003e\n\u003ctd\u003e6x2 (any input to any output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Inputs\u003c\/td\u003e\n\u003ctd\u003e4x HDMI 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS (HDBaseT) Inputs\u003c\/td\u003e\n\u003ctd\u003e2x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Outputs\u003c\/td\u003e\n\u003ctd\u003e2x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Output\u003c\/td\u003e\n\u003ctd\u003e1x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K UHD 3840x2160@30Hz; 1600x1200@60Hz; 1080p@120Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Max Distance (CAT5e AWG24)\u003c\/td\u003e\n\u003ctd\u003e100m standard \/ 130m Long Reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Max Distance (CAT7 AWG23)\u003c\/td\u003e\n\u003ctd\u003e120m standard \/ 170m Long Reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Inputs\u003c\/td\u003e\n\u003ctd\u003e4x 5-pole Phoenix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Outputs\u003c\/td\u003e\n\u003ctd\u003e2x 5-pole Phoenix (balanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Formats\u003c\/td\u003e\n\u003ctd\u003eUp to 8ch PCM, Dolby TrueHD, DTS-HD Master Audio 7.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Memory\u003c\/td\u003e\n\u003ctd\u003e119 factory presets, 12 user-programmable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Panel\u003c\/td\u003e\n\u003ctd\u003eLCD 2x16 characters + buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232 (3-pole Phoenix), USB (mini-B), LAN (RJ45)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e95W max \/ 38W typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e482 W x 43.9 H x 300 D mm (with rack ears), 1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eCE, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware MMX6x2-HT210\u003c\/th\u003e\n\u003cth\u003eKramer VS-88H2\u003c\/th\u003e\n\u003cth\u003eExtron DXP 84 HDMI\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix size\u003c\/td\u003e\n\u003ctd\u003e6x2 (HDMI + HDBaseT)\u003c\/td\u003e\n\u003ctd\u003e8x8 HDMI only\u003c\/td\u003e\n\u003ctd\u003e8x4 HDMI only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT inputs\u003c\/td\u003e\n\u003ctd\u003eYes, 2x TPS inputs\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT output\u003c\/td\u003e\n\u003ctd\u003eYes, 1x TPS output\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE remote powering\u003c\/td\u003e\n\u003ctd\u003eYes, 48V all TPS ports\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog audio I\/O\u003c\/td\u003e\n\u003ctd\u003e4 inputs + 2 outputs, balanced Phoenix\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in event automation\u003c\/td\u003e\n\u003ctd\u003eYes, Event Manager\u003c\/td\u003e\n\u003ctd\u003eLimited macros\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration cloning\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4K UHD support\u003c\/td\u003e\n\u003ctd\u003eYes, 4K@30Hz\u003c\/td\u003e\n\u003ctd\u003eYes, 4K@60Hz 4:4:4\u003c\/td\u003e\n\u003ctd\u003eYes, 4K@60Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat is the difference between the MMX6x2-HT210 and the HT220?\u003c\/dt\u003e\n\u003cdd\u003eThe HT210 has one TPS (HDBaseT) output; the HT220 has two TPS outputs. The HT200 has no TPS output. All three have the same HDMI input and output counts and identical audio and control features.\u003c\/dd\u003e\n\u003cdt\u003eCan the single TPS output serve both inputs and outputs on TPS ports?\u003c\/dt\u003e\n\u003cdd\u003eThe TPS output sends the matrix-routed signal to one HDBaseT display or extender. It functions independently of the two TPS inputs. Both inputs and the output can carry PoE simultaneously.\u003c\/dd\u003e\n\u003cdt\u003eIs the Event Manager able to replace a Crestron or AMX control system?\u003c\/dt\u003e\n\u003cdd\u003eFor simple meeting rooms, yes. The Event Manager handles automated switching, RS-232 commands, IR commands, and volume adjustments triggered by signal events without external control hardware. Complex multi-room or API-dependent integrations still require a dedicated control system.\u003c\/dd\u003e\n\u003cdt\u003eWhat is the maximum 4K distance over TPS?\u003c\/dt\u003e\n\u003cdd\u003e4K UHD is supported up to 100m over CAT7 AWG23 in standard HDBaseT mode. Long Reach mode extends distance to 170m but is limited to Full HD resolution.\u003c\/dd\u003e\n\u003cdt\u003eCan I use this matrix without a control system?\u003c\/dt\u003e\n\u003cdd\u003eYes. The front panel LCD and buttons allow local matrix control. The built-in Event Manager automates common room functions without any external control connection.\u003c\/dd\u003e\n\u003cdt\u003eDoes configuration cloning work across different HT2xx models?\u003c\/dt\u003e\n\u003cdd\u003eConfiguration cloning works across units of the same model (MMX6x2-HT210 to MMX6x2-HT210). Cross-model cloning compatibility should be verified with Lightware technical support.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the MMX6x2-HT210?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware commercial AV reseller.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43979658166508,"sku":"91310031","price":7408.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx6x2-ht210-multiport-hdmi-and-tps-matrix-switcher-91310031-creation-networks-46632.jpg?v=1757925477"},{"product_id":"lightware-mmx6x2-ht220-multiport-hdmi-and-tps-matrix-switcher-91310032","title":"Lightware MMX6x2-HT220 Multiport HDMI and TPS Matrix Switcher - 91310032","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware MMX6x2-HT220 is a compact standalone matrix switcher with six inputs (four HDMI 1.4, two HDBaseT TPS) and two independent HDMI outputs, each with a mirrored HDBaseT TPS output, delivering a 6x2 crosspoint for meeting rooms, classrooms, and control rooms. It targets commercial AV integrators who need a self-contained matrix switcher with built-in audio handling, PoE remote powering, and Event Manager automation in a 1U form factor without an external control processor. The MMX6x2-HT220 receives signals from TPS transmitters at up to 170 meters over a single CAT cable while powering those transmitters via PoE.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe MMX6x2-HT220 provides a 6x2 video matrix: four HDMI 1.4 and two HDBaseT TPS inputs switch to two independent HDMI outputs and two mirrored TPS outputs. PoE 48V remote powering on all TPS ports eliminates local power at transmitter locations and reduces installation time. The device extends TPS signals up to 120 meters in standard HDBaseT mode and up to 170 meters in Long Reach mode, maintaining Full HD at maximum distance. Four 5-pole Phoenix analog audio inputs and two balanced audio outputs allow audio insertion and de-embedding, with adjustable gain and volume directly from the Lightware Device Controller software. The built-in Event Manager triggers crosspoint switches, RS-232 commands, IR commands, and volume changes in response to signal events, resolution changes, or input status — enabling simple room automation without an external control system. Configuration cloning via the Lightware Device Controller copies all settings across multiple units in a multi-room deployment. A 2x16 character LCD and front panel buttons provide local status and control.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx6x2-ht220-multiport-hdmi-and-tps-matrix-switcher-91310032-creation-networks-64399.jpg?v=1757925478\" alt=\"Lightware MMX6x2-HT220 Matrix Switcher\"\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x2 matrix with dual TPS outputs\u003c\/strong\u003e — Four HDMI + two TPS inputs; two HDMI + two TPS outputs for flexible routing to local and remote displays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE 48V on all TPS ports\u003c\/strong\u003e — Powers remote transmitters over CAT cable, eliminating separate power infrastructure at each source location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e170-meter Long Reach TPS\u003c\/strong\u003e — Extends Full HD signals to 170m over CAT7 AWG23; standard HDBaseT reaches 120m with 4K support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K\/UHD and 3D support\u003c\/strong\u003e — Handles 3840x2160@30Hz, 1600x1200@60Hz, and 1080p@120Hz sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour analog audio inputs\u003c\/strong\u003e — 5-pole Phoenix connectors for audio insertion from external sources, with adjustable gain (0–21 dB).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo balanced audio outputs\u003c\/strong\u003e — 5-pole Phoenix balanced outputs for de-embedded audio with volume control (-57 to 0 dB).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Event Manager\u003c\/strong\u003e — Automates switching, IR, RS-232, and volume actions in response to signal or status events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced EDID Management\u003c\/strong\u003e — 119 factory presets and 12 user-programmable slots; locks EDID per input connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration cloning\u003c\/strong\u003e — Copies full device configuration to unlimited units via Lightware Device Controller application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-directional RS-232 and IR\u003c\/strong\u003e — Pass-through and command injection for control of remote displays and devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x16 front panel LCD\u003c\/strong\u003e — Displays status and allows local control without a connected laptop or control system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP compliant\u003c\/strong\u003e — Full support for HDCP on all HDMI and TPS ports.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eClassroom (higher education)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91310032\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Crosspoint\u003c\/td\u003e\n\u003ctd\u003e6x2 (any input to any output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Inputs\u003c\/td\u003e\n\u003ctd\u003e4x HDMI 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS (HDBaseT) Inputs\u003c\/td\u003e\n\u003ctd\u003e2x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Outputs\u003c\/td\u003e\n\u003ctd\u003e2x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Outputs\u003c\/td\u003e\n\u003ctd\u003e2x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K UHD 3840x2160@30Hz; 1600x1200@60Hz; 1080p@120Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Max Distance (CAT5e AWG24)\u003c\/td\u003e\n\u003ctd\u003e100m standard \/ 130m Long Reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Max Distance (CAT7 AWG23)\u003c\/td\u003e\n\u003ctd\u003e120m standard \/ 170m Long Reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Inputs\u003c\/td\u003e\n\u003ctd\u003e4x 5-pole Phoenix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Outputs\u003c\/td\u003e\n\u003ctd\u003e2x 5-pole Phoenix (balanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Formats\u003c\/td\u003e\n\u003ctd\u003eUp to 8ch PCM, Dolby TrueHD, DTS-HD Master Audio 7.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEDID Memory\u003c\/td\u003e\n\u003ctd\u003e119 factory presets, 12 user-programmable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Panel\u003c\/td\u003e\n\u003ctd\u003eLCD 2x16 characters + buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232 (3-pole Phoenix), USB (mini-B), LAN (RJ45)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e120W max \/ 40W typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e482 W x 43.9 H x 300 D mm (with rack ears), 1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eCE, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware MMX6x2-HT220\u003c\/th\u003e\n\u003cth\u003eKramer VS-88H2\u003c\/th\u003e\n\u003cth\u003eExtron DXP 84 HDMI\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix size\u003c\/td\u003e\n\u003ctd\u003e6x2 (HDMI + HDBaseT)\u003c\/td\u003e\n\u003ctd\u003e8x8 HDMI only\u003c\/td\u003e\n\u003ctd\u003e8x4 HDMI only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT inputs\u003c\/td\u003e\n\u003ctd\u003eYes, 2x TPS inputs\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT outputs\u003c\/td\u003e\n\u003ctd\u003eYes, 2x TPS outputs\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE remote powering\u003c\/td\u003e\n\u003ctd\u003eYes, 48V all TPS ports\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog audio I\/O\u003c\/td\u003e\n\u003ctd\u003e4 inputs + 2 outputs, balanced Phoenix\u003c\/td\u003e\n\u003ctd\u003eNo analog audio I\/O\u003c\/td\u003e\n\u003ctd\u003eNo analog audio I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in event automation\u003c\/td\u003e\n\u003ctd\u003eYes, Event Manager\u003c\/td\u003e\n\u003ctd\u003eLimited macro\/trigger support\u003c\/td\u003e\n\u003ctd\u003eNo native event manager\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration cloning\u003c\/td\u003e\n\u003ctd\u003eYes, via Lightware Device Controller\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4K UHD\u003c\/td\u003e\n\u003ctd\u003eYes, 4K@30Hz\u003c\/td\u003e\n\u003ctd\u003eYes, 4K@60Hz 4:4:4\u003c\/td\u003e\n\u003ctd\u003eYes, 4K@60Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat is the difference between the MMX6x2-HT220 and the MMX6x2-HT210?\u003c\/dt\u003e\n\u003cdd\u003eThe HT220 has two TPS outputs; the HT210 has one TPS output. The HT200 has no TPS outputs. All three share the same HDMI input\/output count and feature set otherwise.\u003c\/dd\u003e\n\u003cdt\u003eDoes PoE work on both TPS inputs and outputs?\u003c\/dt\u003e\n\u003cdd\u003ePoE 48V remote powering is available on all TPS ports (both inputs and outputs), powering connected TPS transmitters and receivers over the CAT cable.\u003c\/dd\u003e\n\u003cdt\u003eCan this unit switch audio independently from video?\u003c\/dt\u003e\n\u003cdd\u003eNo. Audio and video are switched together as a matrix crosspoint. However, audio can be de-embedded at the outputs and volume-adjusted independently via the balanced audio outputs.\u003c\/dd\u003e\n\u003cdt\u003eDoes Long Reach mode affect audio or control signals?\u003c\/dt\u003e\n\u003cdd\u003eLong Reach mode limits the maximum resolution to Full HD (1080p). Audio, RS-232, IR, and Ethernet pass-through continue to function normally in Long Reach mode.\u003c\/dd\u003e\n\u003cdt\u003eWhat control interfaces does the MMX6x2-HT220 support?\u003c\/dt\u003e\n\u003cdd\u003eThe unit is controllable via RS-232 (3-pole Phoenix), USB (mini-B), and Ethernet (TCP\/IP) using the Lightware Device Controller application or third-party control systems.\u003c\/dd\u003e\n\u003cdt\u003eIs configuration cloning available for multi-room deployments?\u003c\/dt\u003e\n\u003cdd\u003eYes. The Lightware Device Controller application can clone the full configuration from one unit to unlimited additional units in a few steps.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the MMX6x2-HT220?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized Lightware commercial AV reseller.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43979688050924,"sku":"91310032","price":7738.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx6x2-ht220-multiport-hdmi-and-tps-matrix-switcher-91310032-creation-networks-64399.jpg?v=1757925478"},{"product_id":"lightware-mmx8x4-ht400mc-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-91310041","title":"Lightware MMX8x4-HT400MC HDMI and TPS Matrix Switcher with Special Audio Inputs - 91310041","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware MMX8x4-HT400MC is a standalone matrix switcher purpose-built for conference room AV integration, combining eight inputs (four HDMI, four HDBaseT TPS) with four HDMI outputs and a dedicated Special Audio Input block for microphone and line-in signals. It serves corporate integrators deploying unified AV and audio control in boardrooms, executive conference rooms, and Cisco video conferencing environments. The built-in sound mixer, ducking function, and CEC\/IR\/RS-232 event automation make this matrix a self-sufficient conference room AV controller requiring minimal external control hardware.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe MMX8x4-HT400MC is the corporate version of the MMX8x4-HT420M, optimized for fixed conference room installations with a focus on Cisco VC room integration and third-party video conference collaboration. It accepts four HDMI and four HDBaseT TPS inputs and routes them to four HDMI outputs, supporting 4K\/UHD at 30Hz RGB 4:4:4 and 60Hz YCbCr 4:2:0. The dedicated Special Audio Input block includes a microphone preamp and line-in port with a built-in DSP sound mixer and voice activation (ducking) feature that automatically attenuates background audio when the presenter speaks. A balanced 5-pole Phoenix output serves the built-in mixer. Cisco VC integration is available via RS-232-to-USB connection, supporting Cisco Room Kit login. The Advanced Control Pack enables CEC command reception and transmission, true IR control using HEX codes, RS-232 protocol communication, and 100 event slots in the built-in Event Manager — allowing automated room responses to input changes, resolution shifts, or occupancy events without an external control processor.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx8x4-ht400mc-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-91310041-creation-networks-94964.png?v=1757925480\" alt=\"Lightware MMX8x4-HT400MC HDMI and TPS Matrix Switcher\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx8x4-ht400mc-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-91310041-creation-networks-64251.png?v=1757925481\" alt=\"Lightware MMX8x4-HT400MC rear panel\"\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x4 matrix routing\u003c\/strong\u003e — Four HDMI and four TPS inputs routed to four HDMI outputs; any input to any output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K\/UHD and 3D support\u003c\/strong\u003e — Full support for 3840x2160@30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0, and 3D content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Audio Input block\u003c\/strong\u003e — Dedicated microphone and line-in ports with built-in preamp and DSP mixer for audio reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice activation (ducking)\u003c\/strong\u003e — Automatically lowers background audio volume when the presenter speaks into the microphone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced audio output for mixer\u003c\/strong\u003e — One shared 5-pole Phoenix balanced output for the built-in sound mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCisco VC room integration\u003c\/strong\u003e — RS-232-to-USB connection supports Cisco Room Kit login and control over video conferencing systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Event Manager\u003c\/strong\u003e — 100 event slots allow automated matrix actions in response to signal, resolution, or status changes without external control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCEC command support\u003c\/strong\u003e — Receives and transmits CEC commands on HDMI ports for display and device control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue IR control\u003c\/strong\u003e — Sends HEX IR codes to displays, media players, and other IR-controlled devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced EDID Management\u003c\/strong\u003e — Per-port EDID emulation enforces correct resolution output from any source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront panel LCD and jog dial\u003c\/strong\u003e — Local control and status display without requiring a laptop or control system connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS-232 and IR command injection\u003c\/strong\u003e — Sends control commands to remote endpoints directly from the LAN connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e91310041\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Crosspoint\u003c\/td\u003e\n\u003ctd\u003e8x4 (8 inputs, 4 outputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Inputs\u003c\/td\u003e\n\u003ctd\u003e4x HDMI 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS (HDBaseT) Inputs\u003c\/td\u003e\n\u003ctd\u003e4x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Outputs\u003c\/td\u003e\n\u003ctd\u003e4x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Outputs\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K UHD 3840x2160@30Hz RGB 4:4:4 \/ 60Hz YCbCr 4:2:0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Max Distance (CAT5e AWG24)\u003c\/td\u003e\n\u003ctd\u003e60m at 4K; 60m at 1080p standard mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Max Distance (CAT7 AWG23)\u003c\/td\u003e\n\u003ctd\u003e80m at 4K; 80m at 1080p standard mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial Audio Inputs\u003c\/td\u003e\n\u003ctd\u003eMicrophone + Line-in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBalanced Audio Output (Mixer)\u003c\/td\u003e\n\u003ctd\u003e1x 5-pole Phoenix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEvent Manager Slots\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232, Ethernet, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Ports\u003c\/td\u003e\n\u003ctd\u003e2x (for display control)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial\/IR Ports\u003c\/td\u003e\n\u003ctd\u003e2x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet (Control)\u003c\/td\u003e\n\u003ctd\u003e1x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Panel\u003c\/td\u003e\n\u003ctd\u003eLCD + jog dial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e482 W x 300 D x 87.8 H mm (with rack ears)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP\u003c\/td\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware MMX8x4-HT400MC\u003c\/th\u003e\n\u003cth\u003eKramer VS-88H2\u003c\/th\u003e\n\u003cth\u003eExtron DXP 84 HDMI\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix size\u003c\/td\u003e\n\u003ctd\u003e8x4 (HDMI + HDBaseT inputs)\u003c\/td\u003e\n\u003ctd\u003e8x8 HDMI only\u003c\/td\u003e\n\u003ctd\u003e8x4 HDMI only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT TPS inputs\u003c\/td\u003e\n\u003ctd\u003e4x HDBaseT TPS inputs\u003c\/td\u003e\n\u003ctd\u003eNone (HDMI only)\u003c\/td\u003e\n\u003ctd\u003eNone (HDMI only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in mic\/audio mixer\u003c\/td\u003e\n\u003ctd\u003eYes, with DSP and ducking\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice activation (ducking)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in event automation\u003c\/td\u003e\n\u003ctd\u003eYes, 100 event slots\u003c\/td\u003e\n\u003ctd\u003eLimited macro support\u003c\/td\u003e\n\u003ctd\u003eNo built-in event manager\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCisco VC integration\u003c\/td\u003e\n\u003ctd\u003eYes, RS-232-USB Cisco Room Kit\u003c\/td\u003e\n\u003ctd\u003eNo native VC integration\u003c\/td\u003e\n\u003ctd\u003eNo native VC integration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCEC control\u003c\/td\u003e\n\u003ctd\u003eYes, send and receive\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003ctd\u003eYes via EDID Minder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4K UHD support\u003c\/td\u003e\n\u003ctd\u003eYes, 30Hz 4:4:4 \/ 60Hz 4:2:0\u003c\/td\u003e\n\u003ctd\u003eYes, 4K@60Hz 4:4:4\u003c\/td\u003e\n\u003ctd\u003eYes, 4K@60Hz 4:4:4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eWhat is the difference between the MMX8x4-HT400MC and the MMX8x4-HT420M?\u003c\/dt\u003e\n\u003cdd\u003eThe HT400MC is the corporate version with four HDMI outputs and no TPS outputs, fewer Ethernet ports, no PoE, no GPIO, and no relay outputs. The HT420M adds two TPS outputs, two additional Ethernet ports, four relay outputs, GPIO, and Long Reach TPS mode for more complex installations.\u003c\/dd\u003e\n\u003cdt\u003eCan this matrix replace an external control processor in a conference room?\u003c\/dt\u003e\n\u003cdd\u003eFor simple to moderate conference rooms, yes. The built-in Event Manager with 100 slots handles automated switching, IR commands, CEC, and RS-232 control without an external control system.\u003c\/dd\u003e\n\u003cdt\u003eHow does the microphone ducking work?\u003c\/dt\u003e\n\u003cdd\u003eThe Special Audio Input block monitors the microphone input. When voice is detected above a threshold, the system automatically reduces the volume of the HDMI-embedded audio mix, making the presenter's voice the dominant audio source.\u003c\/dd\u003e\n\u003cdt\u003eWhat cable type is recommended for TPS inputs at 4K?\u003c\/dt\u003e\n\u003cdd\u003eLightware recommends CAT7 SFTP AWG23 cable for best performance. At 4K, maximum distance is 40 meters regardless of cable grade.\u003c\/dd\u003e\n\u003cdt\u003eDoes this unit support HDCP?\u003c\/dt\u003e\n\u003cdd\u003eYes. HDCP is fully supported on all HDMI and TPS ports.\u003c\/dd\u003e\n\u003cdt\u003eIs Cisco Room Kit the only supported VC system?\u003c\/dt\u003e\n\u003cdd\u003eThe RS-232-to-USB method is specifically documented for Cisco Room Kit. Other VC codecs supporting RS-232 may be compatible but should be verified with Lightware technical support.\u003c\/dd\u003e\n\u003cdt\u003eWhere can I purchase the MMX8x4-HT400MC?\u003c\/dt\u003e\n\u003cdd\u003eAvailable from \u003ca href=\"https:\/\/creationnetworks.net\"\u003eCreation Networks\u003c\/a\u003e, an authorized commercial AV reseller for Lightware products.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43979688673516,"sku":"91310041","price":7903.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx8x4-ht400mc-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-91310041-creation-networks-94964.png?v=1757925480"},{"product_id":"lightware-mmx8x4-ht420m-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-and-multiport-control-options-91310042","title":"Lightware MMX8x4-HT420M HDMI and TPS Matrix Switcher with Special Audio Inputs and Multiport Control Options - 91310042","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware MMX8x4-HT420M is a standalone 8x4 matrix switcher from the MMX conference room series, with eight mixed inputs (HDMI 1.4 and TPS2\/HDBaseT) and four TPS2 outputs, combined with dedicated balanced analog audio I\/O and a full multi-port control suite. Its asymmetric 8x4 crosspoint — more inputs than outputs — is purpose-designed for rooms where multiple presentation sources must be routed to a focused set of displays, such as a training room with one primary display and one confidence monitor, or a boardroom driving a videowall and a ceiling projector from multiple sources. AV integrators specifying a \u003cstrong\u003e8x4 HDBaseT HDMI matrix with analog audio and conference room automation\u003c\/strong\u003e will find this model correctly sized for its application.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe MMX8x4-HT420M routes 4K\/UHD signals (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) with full HDCP and 3D support. TPS2 outputs extend HDMI 1.4 over single CAT5e\/CAT6\/CAT7 cables at distances up to 100m (CAT5e AWG24) and 170m in Long Reach mode for Full HD (CAT7 AWG23). PoE 48V is available on all TPS I\/O ports for extender powering. Balanced analog audio connectors at both input and output positions (5-pole Phoenix) provide localized audio management within the matrix itself.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx8x4-ht420m-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-and-multiport-control-options-91310042-creation-networks-29345.png?v=1757925482\" alt=\"Lightware MMX8x4-HT420M 8x4 HDMI TPS matrix switcher front\" style=\"max-width:100%;\"\u003e\u003cp\u003eThe built-in Event Manager delivers automated room control — display power sequences, input switching on signal detection, screen control via relay — without an external control processor. Relay outputs, GPIO, RS-232 ports, serial\/IR ports, and IR ports provide the same control port density as the full MMX8x8-HT series, including Ethernet injection via TPS for LAN extension to remote endpoints. Advanced EDID Management handles source resolution management per input port.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx8x4-ht420m-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-and-multiport-control-options-91310042-creation-networks-15178.png?v=1757925482\" alt=\"Lightware MMX8x4-HT420M rear panel\" style=\"max-width:100%;\"\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x4 Asymmetric Crosspoint\u003c\/strong\u003e — Eight inputs, four TPS2 outputs; optimized for presentation-focused room designs with fewer displays than sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed HDMI and TPS2 Inputs\u003c\/strong\u003e — Accepts HDMI 1.4 and HDBaseT sources in the same input matrix.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x TPS2 Outputs\u003c\/strong\u003e — All outputs via HDBaseT, distributing video, audio, Ethernet, and RS-232 over single CAT cable to displays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K\/UHD Support\u003c\/strong\u003e — 30Hz RGB 4:4:4 and 60Hz YCbCr 4:2:0 with HDCP and 3D.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 170m TPS Extension\u003c\/strong\u003e — Long Reach mode at Full HD over CAT7 AWG23; 100m at 4K 30Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE 48V on All TPS Ports\u003c\/strong\u003e — Remote extender powering without external injectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Analog Audio I\/O\u003c\/strong\u003e — 5-pole Phoenix connectors at input and output positions for audio embedding and de-embedding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Event Manager\u003c\/strong\u003e — Automated room switching and control logic without external control processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x RS-232 + 4x IR + Relay + GPIO\u003c\/strong\u003e — Full control port suite for display management, screen control, and room integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet via TPS\u003c\/strong\u003e — LAN extension to remote room endpoints over the same CAT cable as video.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced EDID Management\u003c\/strong\u003e — Per-input EDID emulation with factory and user-defined profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Size\u003c\/td\u003e\n\u003ctd\u003e8x4 (8 inputs, 4 outputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Types\u003c\/td\u003e\n\u003ctd\u003eHDMI 1.4 + TPS2 (HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Type\u003c\/td\u003e\n\u003ctd\u003e4x TPS2 (HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K\/UHD 30Hz RGB 4:4:4; 4K 60Hz YCbCr 4:2:0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3D Support\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax TPS Distance (Long Reach, CAT7 AWG23)\u003c\/td\u003e\n\u003ctd\u003e170 m at Full HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax TPS Distance (Auto, CAT7 AWG23)\u003c\/td\u003e\n\u003ctd\u003e120 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax TPS Distance at 4K 30Hz\u003c\/td\u003e\n\u003ctd\u003e70–100 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003e48V on all I\/O TPS ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBalanced Audio\u003c\/td\u003e\n\u003ctd\u003e5-pole Phoenix, input + output positions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Ports\u003c\/td\u003e\n\u003ctd\u003e2x bidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial\/IR Ports\u003c\/td\u003e\n\u003ctd\u003e2x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Ports\u003c\/td\u003e\n\u003ctd\u003e4x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay Outputs\u003c\/td\u003e\n\u003ctd\u003e4x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO\u003c\/td\u003e\n\u003ctd\u003e6x GPIO + 5V + GND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet via TPS\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware MMX8x4-HT420M\u003c\/th\u003e\n\u003cth\u003eCrestron DM-MD8X4-CPU3\u003c\/th\u003e\n\u003cth\u003eAtlona AT-UHD-CLSO-824\u003c\/th\u003e\n\u003cth\u003eExtron DXP 84 HDMI 4K\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix Size\u003c\/td\u003e\n\u003ctd\u003e8x4 with all-TPS2 outputs\u003c\/td\u003e\n\u003ctd\u003e8x4 or custom card config\u003c\/td\u003e\n\u003ctd\u003e8x4 HDMI + HDBaseT outputs\u003c\/td\u003e\n\u003ctd\u003e8x4 HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDBaseT Outputs\u003c\/td\u003e\n\u003ctd\u003eAll 4 outputs are TPS2\/HDBaseT with PoE\u003c\/td\u003e\n\u003ctd\u003eDM fiber\/CAT card config\u003c\/td\u003e\n\u003ctd\u003eHDBaseT TX on outputs\u003c\/td\u003e\n\u003ctd\u003eHDMI only (no built-in HDBaseT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio\u003c\/td\u003e\n\u003ctd\u003eBuilt-in balanced I\/O at matrix ports\u003c\/td\u003e\n\u003ctd\u003eRequires audio card or external DSP\u003c\/td\u003e\n\u003ctd\u003eAnalog de-embed per output\u003c\/td\u003e\n\u003ctd\u003eAnalog de-embed per output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in Control\u003c\/td\u003e\n\u003ctd\u003eEvent Manager + RS-232 x2, IR x4, Relay x4, GPIO\u003c\/td\u003e\n\u003ctd\u003eRequires Crestron control processor\u003c\/td\u003e\n\u003ctd\u003eRS-232 + Ethernet only\u003c\/td\u003e\n\u003ctd\u003eRS-232 + Ethernet + IR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003eBuilt-in 48V on all TPS ports\u003c\/td\u003e\n\u003ctd\u003ePoE via DM card\u003c\/td\u003e\n\u003ctd\u003ePoE on HDBaseT outputs\u003c\/td\u003e\n\u003ctd\u003eNo PoE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Distance\u003c\/td\u003e\n\u003ctd\u003e170m Long Reach Full HD; 100m at 4K 30Hz\u003c\/td\u003e\n\u003ctd\u003e100m per DM spec\u003c\/td\u003e\n\u003ctd\u003e100m HDBaseT\u003c\/td\u003e\n\u003ctd\u003eNo HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhy choose an 8x4 matrix instead of an 8x8?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe 8x4 configuration is cost-appropriate for rooms with up to four displays and up to eight sources. Paying for output capacity that won't be used in a fixed room design adds unnecessary cost. The MMX8x4-HT420M delivers the same control port density and feature set as the 8x8 models at the correct output count for smaller display environments.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eAre all outputs HDBaseT or are there HDMI output options?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAll four outputs on the MMX8x4-HT420M are TPS2 (HDBaseT). For mixed HDMI and TPS2 output configurations in an 8x4 frame, consult with Creation Networks on alternative MMX or MX series configurations.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat TPS extenders work with the MMX8x4-HT420M outputs?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAll Lightware HDBaseT receivers (HDMI-TPS-RX86, RX87, RX96, RX97 series, and others) and HDBaseT-compliant third-party receivers are compatible. HDBaseT-compliant displays with built-in receivers also connect directly.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs audio de-embedding available at the TPS2 output ports?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The balanced analog audio connectors adjacent to output positions allow de-embedding of HDMI-embedded audio from the TPS2 output signal, providing analog audio for room amplifiers or DSP inputs without a separate audio processor at each display location.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan the Event Manager handle display power sequencing?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The Event Manager can be configured to send RS-232 power-on commands to connected displays and projectors in sequence when a source signal is detected, and send power-off commands after a configurable no-signal timeout — automating the full room power cycle without external control processor programming.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I buy the MMX8x4-HT420M?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAvailable through Creation Networks at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43979690508524,"sku":"91310042","price":11698.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx8x4-ht420m-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-and-multiport-control-options-91310042-creation-networks-29345.png?v=1757925482"},{"product_id":"lightware-mmx8x8-ht080-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-and-multiport-control-options-91310087","title":"Lightware MMX8x8-HT080 HDMI and TPS Matrix Switcher with Special Audio Inputs and Multiport Control Options - 91310087","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware MMX8x8-HT080 is a standalone 8x8 matrix switcher for conference room AV, combining four HDMI 1.4 and four TPS2 (HDBaseT) inputs with four HDMI and four TPS2 outputs. It shares the same chassis and control architecture as the MMX8x8-HT440 but omits the dedicated analog audio ports — making it the correct model when the room's audio management is handled by a separate DSP or when only HDMI-embedded audio is required in the matrix signal path. AV integrators specifying a \u003cstrong\u003econference room HDBaseT HDMI 8x8 matrix with PoE and multi-port control but no matrix-level analog audio\u003c\/strong\u003e will find the MMX8x8-HT080 avoids paying for audio I\/O they don't need while retaining the full Event Manager, relay, GPIO, and IR control capability of the HT series.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe MMX8x8-HT080 routes 4K\/UHD signals (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) with full HDCP compliance. TPS2 ports extend HDMI 1.4 over single CAT5e\/CAT6\/CAT7 cables at up to 100m (CAT5e AWG24) or 170m in Long Reach mode (CAT7 AWG23, Full HD only). PoE 48V is available on all I\/O TPS ports for extender powering. The built-in Event Manager provides automated room control — input switching on signal detection, display power sequences via RS-232, projection screen control via relay — without requiring an external control processor.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx8x8-ht080-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-and-multiport-control-options-91310087-creation-networks-84125.jpg?v=1757925484\" alt=\"Lightware MMX8x8-HT080 conference room HDMI TPS matrix switcher\" style=\"max-width:100%;\"\u003e\u003cp\u003eControl ports include two bidirectional RS-232 ports, two serial\/IR ports, four IR ports, four relay outputs, and a 6-pin GPIO port, matching the HT440 for room control capability. Ethernet device control and Ethernet injection via TPS extend LAN connectivity to remote endpoints over the same cable carrying video and audio. Advanced EDID Management with factory and user-programmable presets is included for source resolution management.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x HDMI + 4x TPS2 Inputs, 4x HDMI + 4x TPS2 Outputs\u003c\/strong\u003e — Mixed HDMI and HDBaseT I\/O in a single conference room device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K\/UHD Support\u003c\/strong\u003e — 4K 30Hz RGB 4:4:4 and 60Hz YCbCr 4:2:0 with HDCP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 170m TPS Extension (Long Reach Mode)\u003c\/strong\u003e — Full HD over CAT7 AWG23; 100m at 4K 30Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE 48V on All TPS Ports\u003c\/strong\u003e — Integrated PoE injector eliminates external injectors for extender powering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Analog Audio Ports\u003c\/strong\u003e — Cleaner signal chain when room audio is managed by an external DSP or AV receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Event Manager\u003c\/strong\u003e — Automated switching and room control without external control processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x Bidirectional RS-232 + 4x IR Ports\u003c\/strong\u003e — Direct display and projector control over control ports or via TPS cable runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x Relay Outputs and 6-Pin GPIO\u003c\/strong\u003e — Interface with screens, projector lifts, and building automation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet via TPS\u003c\/strong\u003e — LAN extension to remote endpoints over single CAT cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced EDID Management\u003c\/strong\u003e — Per-input EDID emulation with factory and user-defined presets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Inputs\u003c\/td\u003e\n\u003ctd\u003e4x HDMI 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS2 (HDBaseT) Inputs\u003c\/td\u003e\n\u003ctd\u003e4x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Outputs\u003c\/td\u003e\n\u003ctd\u003e4x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS2 (HDBaseT) Outputs\u003c\/td\u003e\n\u003ctd\u003e4x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Ports\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K\/UHD 30Hz RGB 4:4:4; 4K 60Hz YCbCr 4:2:0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3D Support\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax TPS Distance (CAT7 AWG23, Long Reach)\u003c\/td\u003e\n\u003ctd\u003e170 m at Full HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax TPS Distance (CAT7 AWG23, Auto)\u003c\/td\u003e\n\u003ctd\u003e120 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax TPS Distance at 4K 30Hz\u003c\/td\u003e\n\u003ctd\u003e70–100 m depending on cable type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE on TPS Ports\u003c\/td\u003e\n\u003ctd\u003eYes — 48V on all I\/O TPS ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Ports\u003c\/td\u003e\n\u003ctd\u003e2x bidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial\/IR Ports\u003c\/td\u003e\n\u003ctd\u003e2x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Ports\u003c\/td\u003e\n\u003ctd\u003e4x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay Output Ports\u003c\/td\u003e\n\u003ctd\u003e4x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO\u003c\/td\u003e\n\u003ctd\u003e6x GPIO + 5V + GND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet (Control)\u003c\/td\u003e\n\u003ctd\u003e1x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet (External Control)\u003c\/td\u003e\n\u003ctd\u003e2x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet via TPS\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware MMX8x8-HT080\u003c\/th\u003e\n\u003cth\u003eCrestron DM-MD8X8-CPU3\u003c\/th\u003e\n\u003cth\u003eKramer VS-88H2 + KT-22\u003c\/th\u003e\n\u003cth\u003eAtlona AT-UHD-CLSO-824\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio at Matrix\u003c\/td\u003e\n\u003ctd\u003eNone — HDMI embedded audio only, external DSP handles room audio\u003c\/td\u003e\n\u003ctd\u003eAudio via separate DM audio card\u003c\/td\u003e\n\u003ctd\u003eNo built-in analog audio\u003c\/td\u003e\n\u003ctd\u003eAnalog audio on select I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS\/HDBaseT I\/O\u003c\/td\u003e\n\u003ctd\u003e4x in + 4x out, PoE on all TPS ports\u003c\/td\u003e\n\u003ctd\u003eDM CAT or fiber cards\u003c\/td\u003e\n\u003ctd\u003eRequires separate HDBaseT TX\/RX\u003c\/td\u003e\n\u003ctd\u003e8x HDBaseT transmitter ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in Control\u003c\/td\u003e\n\u003ctd\u003eEvent Manager: RS-232, IR x4, Relay x4, GPIO, Ethernet injection\u003c\/td\u003e\n\u003ctd\u003eRequires Crestron processor\u003c\/td\u003e\n\u003ctd\u003eBasic RS-232 and IR\u003c\/td\u003e\n\u003ctd\u003eEthernet and RS-232 only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003eBuilt-in 48V on all TPS I\/O ports\u003c\/td\u003e\n\u003ctd\u003ePoE via DM card options\u003c\/td\u003e\n\u003ctd\u003eNo built-in PoE\u003c\/td\u003e\n\u003ctd\u003ePoE on HDBaseT outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Distance\u003c\/td\u003e\n\u003ctd\u003e170m at Full HD (Long Reach); 100m at 4K 30Hz\u003c\/td\u003e\n\u003ctd\u003e100m per DM spec\u003c\/td\u003e\n\u003ctd\u003e100m typical HDBaseT\u003c\/td\u003e\n\u003ctd\u003e100m HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEvent Manager\u003c\/td\u003e\n\u003ctd\u003eBuilt-in — no external processor for basic room automation\u003c\/td\u003e\n\u003ctd\u003eSIMPL Windows programming required\u003c\/td\u003e\n\u003ctd\u003eNo Event Manager\u003c\/td\u003e\n\u003ctd\u003eNo Event Manager\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eHow does the MMX8x8-HT080 differ from the MMX8x8-HT440?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe MMX8x8-HT080 omits the eight balanced analog audio ports included in the HT440. All other specifications — matrix size, TPS I\/O, PoE, Event Manager, relay, IR, GPIO, and control ports — are identical. Choose the HT080 when audio is managed externally; choose the HT440 when matrix-level analog audio embedding and de-embedding are required.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan the MMX8x8-HT080 control a projector or display without an external control processor?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The built-in Event Manager can send RS-232 commands to displays and projectors on power-up, source switching, or room signal detection events. Four IR ports and two serial\/IR ports provide additional display control options. For rooms requiring this level of automation, no separate control processor is needed.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat TPS extenders are compatible with the MMX8x8-HT080?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe MMX8x8-HT080 is compatible with Lightware's HDBaseT extender range (HDMI-TPS-RX86, HDMI-TPS-RX87, HDMI-TPS-RX96, HDMI-TPS-RX97 series and others) as well as third-party HDBaseT-compliant devices and displays with built-in HDBaseT receivers.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat PoE specification is supported?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePoE 48V is available on every I\/O TPS port. The built-in PoE injector function requires the PSU-48vp external 48V power supply connected to the matrix board — the PoE power is not derived from the matrix's internal power supply.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs 4K 60Hz supported over TPS?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003e4K at 60Hz YCbCr 4:2:0 (297 MHz pixel clock) is supported at distances up to 70m on CAT5e AWG24 and up to 100m on CAT7 AWG23. 4K 60Hz RGB 4:4:4 is not supported over TPS.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I buy the MMX8x8-HT080?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAvailable at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. Contact Creation Networks for room design consultation and integration support.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43979692212460,"sku":"91310087","price":11962.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx8x8-ht080-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-and-multiport-control-options-91310087-creation-networks-84125.jpg?v=1757925484"},{"product_id":"lightware-mmx8x8-ht440-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-and-multiport-control-options-91310086","title":"Lightware MMX8x8-HT440 HDMI and TPS Matrix Switcher with Special Audio Inputs and Multiport Control Options - 91310086","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Lightware MMX8x8-HT440 is a standalone 8x8 matrix switcher engineered specifically for conference room AV infrastructure, combining four HDMI 1.4 and four TPS2 (HDBaseT) inputs with four HDMI and four TPS2 outputs — plus eight balanced analog audio ports, built-in PoE for remote extender powering, and an extensive multi-port control suite. It is the highest-capability model in the MMX8x8-HT series, offering the most control ports (bidirectional RS-232, Ethernet injection, IR, relay, and GPIO) in the MMX conference room matrix lineup. AV integrators specifying a \u003cstrong\u003econference room HDBaseT HDMI matrix switcher with audio and multi-port control\u003c\/strong\u003e for mid-to-large meeting spaces, training rooms, or collaborative education environments will find the MMX8x8-HT440 covers the full control requirement without an external control processor.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe MMX8x8-HT440 routes uncompressed 4K\/UHD video (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) and 3D signals with full HDCP compliance. TPS2 ports extend HDMI 1.4 video, audio, Ethernet, and RS-232 over a single CAT6 or CAT7 cable: up to 100m in standard HDBaseT mode, 120m on CAT7 AWG23, and up to 170m in Long Reach mode for Full HD signals. PoE 48V is available on every I\/O TPS port for cost-effective extender powering without separate injectors.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx8x8-ht440-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-and-multiport-control-options-91310086-creation-networks-68326.jpg?v=1757925485\" alt=\"Lightware MMX8x8-HT440 HDMI TPS matrix switcher front view\" style=\"max-width:100%;\"\u003e\u003cp\u003eEight balanced 5-pole Phoenix audio connectors provide bidirectional analog audio at four input and four output positions (both TPS2 and HDMI). Port audio direction is software-configurable via Lightware Device Controller. The built-in Event Manager enables automated switching triggered by RS-232, IR, Ethernet, relay, or GPIO events — providing conference room automation without a dedicated control processor in many installations. Four relay outputs and a 6-pin GPIO port extend integration to room control systems, displays, and room scheduling platforms.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x HDMI + 4x TPS2 Inputs, 4x HDMI + 4x TPS2 Outputs\u003c\/strong\u003e — Mixed HDMI and HDBaseT I\/O for flexible source and display connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K\/UHD Support\u003c\/strong\u003e — 4K 30Hz RGB 4:4:4 and 4K 60Hz YCbCr 4:2:0 with full HDCP compliance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 170m TPS Extension (Long Reach Mode)\u003c\/strong\u003e — Full HD signal extension over single CAT7 AWG23 cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE 48V on All TPS Ports\u003c\/strong\u003e — Powers compatible extenders without external PoE injectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x Balanced Analog Audio Ports\u003c\/strong\u003e — Bidirectional 5-pole Phoenix connectors; software-configurable direction per port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Event Manager\u003c\/strong\u003e — Automated switching via RS-232, IR, Ethernet, relay, and GPIO events without external control processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x Bidirectional RS-232 Ports\u003c\/strong\u003e — For control of displays, projectors, and other serial devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x Serial\/IR Ports + 4x IR Ports\u003c\/strong\u003e — Direct IR injection to remote displays over TPS cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x Relay Output Ports\u003c\/strong\u003e — Interface with room systems, screens, projector lifts, and building automation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Pin GPIO Port\u003c\/strong\u003e — General-purpose I\/O for custom room control logic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet via TPS\u003c\/strong\u003e — Extends LAN connectivity to remote endpoints over the TPS cable run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced EDID Management\u003c\/strong\u003e — Factory and custom EDID emulation per input connector.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Inputs\u003c\/td\u003e\n\u003ctd\u003e4x HDMI 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS2 (HDBaseT) Inputs\u003c\/td\u003e\n\u003ctd\u003e4x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Outputs\u003c\/td\u003e\n\u003ctd\u003e4x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS2 (HDBaseT) Outputs\u003c\/td\u003e\n\u003ctd\u003e4x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Resolution\u003c\/td\u003e\n\u003ctd\u003e4K\/UHD 30Hz RGB 4:4:4; 4K 60Hz YCbCr 4:2:0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3D Support\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax TPS Distance (CAT7 AWG23, Long Reach)\u003c\/td\u003e\n\u003ctd\u003e170 m at Full HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax TPS Distance (CAT7 AWG23, Auto)\u003c\/td\u003e\n\u003ctd\u003e120 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax TPS Distance at 4K 30Hz\u003c\/td\u003e\n\u003ctd\u003e70–100 m depending on cable type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE on TPS Ports\u003c\/td\u003e\n\u003ctd\u003eYes — 48V on all I\/O TPS ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBalanced Audio Ports\u003c\/td\u003e\n\u003ctd\u003e8x bidirectional, 5-pole Phoenix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRS-232 Ports\u003c\/td\u003e\n\u003ctd\u003e2x bidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial\/IR Ports\u003c\/td\u003e\n\u003ctd\u003e2x for display control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR Ports\u003c\/td\u003e\n\u003ctd\u003e4x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay Output Ports\u003c\/td\u003e\n\u003ctd\u003e4x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO\u003c\/td\u003e\n\u003ctd\u003e6x GPIO + 5V + GND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet (Control)\u003c\/td\u003e\n\u003ctd\u003e1x for device control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet (External Control)\u003c\/td\u003e\n\u003ctd\u003e2x for external device control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet via TPS\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption (max)\u003c\/td\u003e\n\u003ctd\u003e122 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eCompetitor Comparison\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriteria\u003c\/th\u003e\n\u003cth\u003eLightware MMX8x8-HT440\u003c\/th\u003e\n\u003cth\u003eCrestron DM-MD8X8-CPU3\u003c\/th\u003e\n\u003cth\u003eExtron DXP 88 HDMI 4K\u003c\/th\u003e\n\u003cth\u003eAMX Enova DVX-3266HD\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS\/HDBaseT I\/O\u003c\/td\u003e\n\u003ctd\u003e4x TPS2 inputs + 4x TPS2 outputs with PoE on all ports\u003c\/td\u003e\n\u003ctd\u003eDM fiber and CAT — PoE optional per card\u003c\/td\u003e\n\u003ctd\u003e8x HDMI + optional HDBaseT outputs, no native PoE\u003c\/td\u003e\n\u003ctd\u003eHDMI\/DVI only, no built-in TPS\/PoE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio\u003c\/td\u003e\n\u003ctd\u003e8x bidirectional balanced Phoenix, direction software-configurable\u003c\/td\u003e\n\u003ctd\u003eRequires audio card or external DSP\u003c\/td\u003e\n\u003ctd\u003eAnalog de-embed on select output ports\u003c\/td\u003e\n\u003ctd\u003eAnalog audio I\/O on select models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232 x2, Serial\/IR x2, IR x4, Relay x4, GPIO, Ethernet injection\u003c\/td\u003e\n\u003ctd\u003eRequires Crestron control processor for full control\u003c\/td\u003e\n\u003ctd\u003eRS-232 x2, IR x4, relay limited\u003c\/td\u003e\n\u003ctd\u003eRS-232 x2, IR, relay via control card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in Automation\u003c\/td\u003e\n\u003ctd\u003eYes — Event Manager triggers switching without external processor\u003c\/td\u003e\n\u003ctd\u003eRequires control processor (SIMPL\/SIMPL+)\u003c\/td\u003e\n\u003ctd\u003eNo built-in Event Manager\u003c\/td\u003e\n\u003ctd\u003eBasic logic via AMX programming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPS Extension Distance\u003c\/td\u003e\n\u003ctd\u003e170m (Long Reach, Full HD); 100m at 4K 30Hz\u003c\/td\u003e\n\u003ctd\u003e100m per DM specification\u003c\/td\u003e\n\u003ctd\u003e100m HDBaseT on optional output cards\u003c\/td\u003e\n\u003ctd\u003eNo HDBaseT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003eBuilt-in on all TPS ports — no external injectors needed\u003c\/td\u003e\n\u003ctd\u003ePoE via DM card options\u003c\/td\u003e\n\u003ctd\u003eNo built-in PoE\u003c\/td\u003e\n\u003ctd\u003eNo PoE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the difference between MMX8x8-HT440 and MMX8x8-HT080?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eBoth models have the same 8x8 matrix and TPS2\/HDMI I\/O configuration. The HT440 includes 8 balanced analog audio ports (both input and output sides), while the HT080 omits the analog audio ports. The HT440 is the appropriate choice when analog audio embedding, de-embedding, or local audio zone feeds are required in the room design.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan the Event Manager replace a dedicated control system?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eFor conference rooms with straightforward automation — switching inputs based on signal detection, controlling displays via RS-232, activating relays for screen drops — the Event Manager can operate the room without a separate control processor. For complex multi-room, scheduling-integrated, or UI-driven control, a dedicated control system remains appropriate.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat cable type is recommended for 170m TPS extension?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCAT7 AWG23 SFTP cable is recommended for achieving the 170m Long Reach extension distance at Full HD (148.5 MHz pixel clock). Long Reach mode is not supported for resolutions with pixel clocks above 148.5 MHz.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs PoE available without an external power supply?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003ePoE 48V is available on all TPS I\/O ports. The built-in PoE injector function requires the supplied PSU-48vp external power source connected directly to the board — it is not drawn from the matrix power supply.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eHow is the analog audio direction configured?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe audio direction of each 5-pole Phoenix connector can be set individually as input or output using Lightware Device Controller (LDC) software. This allows each port to be tailored to the room's audio routing requirements without hardware changes.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhere can I purchase the MMX8x8-HT440?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eAvailable at \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e. Creation Networks provides conference room AV system design, integration support, and post-sale technical assistance for Lightware products.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"LightWare","offers":[{"title":"Default Title","offer_id":43979693293804,"sku":"91310086","price":11962.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/lightware-mmx8x8-ht440-hdmi-and-tps-matrix-switcher-with-special-audio-inputs-and-multiport-control-options-91310086-creation-networks-68326.jpg?v=1757925485"}],"url":"https:\/\/creationnetworks.net\/collections\/lightware-tps-hdbaset-extenders.oembed?page=3","provider":"Creation Networks","version":"1.0","type":"link"}