{"title":"Dynacord","description":"\u003ch1\u003eDynacord Professional Audio Systems\u003c\/h1\u003e\u003cp\u003eDynacord delivers high-performance professional audio systems including amplifiers, networked audio matrices, mixing consoles, and loudspeakers for live sound, houses of worship, and installed commercial AV applications. Creation Networks stocks the current catalog for U.S. integrators. For SKU selection and pricing, contact us through \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eProduct Families\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eL Series Power Amplifiers\u003c\/strong\u003e — install-grade power amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC Series Amplifiers\u003c\/strong\u003e — touring and install amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSonicue Audio Networking\u003c\/strong\u003e — Dante-based audio routing and control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDPM Powermate Mixers\u003c\/strong\u003e — powered mixing consoles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVari-Line Loudspeakers\u003c\/strong\u003e — installation-grade loudspeakers and arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessories\u003c\/strong\u003e — rack hardware and replacement components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHouses of worship sanctuary and broadcast\u003c\/li\u003e\n\u003cli\u003ePerforming arts and theaters\u003c\/li\u003e\n\u003cli\u003eSchools and university performance halls\u003c\/li\u003e\n\u003cli\u003eHospitality with multi-zone audio\u003c\/li\u003e\n\u003cli\u003eTouring and live event production\u003c\/li\u003e\n\u003cli\u003eCorporate auditoriums and event spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProject Support\u003c\/h2\u003e\u003cp\u003eFor SKU selection or quotes, contact us through our \u003ca href=\"https:\/\/creationnetworks.net\/pages\/contact\"\u003econtact page\u003c\/a\u003e or visit \u003ca href=\"https:\/\/creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"dynacord-c1300fdi-dsp-power-amplifier","title":"Dynacord C1300FDi – 2x650W DSP Install Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Dynacord C1300FDi is a 2x650W DSP install power amplifier for fixed commercial AV systems that run 24\/7. This compact rack-mount power amplifier supports low-impedance operation (2 Ω, 4 Ω, 8 Ω) and 70 V bridged operation, making it well suited to distributed background music and voice paging. With FIR Drive speaker processing and SONICUE control, the C1300FDi delivers clean, repeatable performance in conference rooms, houses of worship, and government spaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-c1300fdi-dsp-power-amplifier-creation-networks-14639.png?v=1757928319\" alt=\"Dynacord C1300FDi 2x650W DSP install power amplifier\" style=\"max-width:100%;height:auto;\" loading=\"lazy\"\u003e\n\u003cp\u003eThe Dynacord C Series amplifiers are dedicated installation DSP amplifiers optimized for continuous 24\/7 operation. The C1300FDi delivers 2x650W and supports low-impedance loads at 2 Ω, 4 Ω, and 8 Ω, plus 70 V operation in bridged mode (1 x 625 W), giving integrators flexibility for compact distributed-audio zones. Its Class AB output stage provides clean amplification for background music and intelligible announcements. Fully integrated professional speaker processing with FIR Drive technology gives system designers loudspeaker presets, FIR filters, output and array delay, 10-band user parametric EQ, and 5-band array EQ per channel for accurate tuning. SONICUE sound system software (firmware 2.x or higher) handles commissioning, control, and supervision across an amplifier rack, while a front-panel LC display supports local control. A power-saving standby mode keeps operating cost low in always-on systems. The 1RU chassis with front-to-rear cooling integrates cleanly into a commercial rack. For higher output per channel, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1800fdi-dsp-power-amplifier\"\u003eDynacord C1800FDi\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c2800fdi-dsp-power-amplifier\"\u003eDynacord C2800FDi\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x650W power\u003c\/strong\u003e — Dual-channel amplification sized for compact distributed-audio zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Z and 70 V operation\u003c\/strong\u003e — Drives 2 Ω, 4 Ω, and 8 Ω loads, plus 70 V lines in bridged mode (1 x 625 W).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive speaker processing\u003c\/strong\u003e — Manufacturer-grade presets and FIR filtering for accurate, repeatable loudspeaker tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass AB output stage\u003c\/strong\u003e — Clean amplification for background music and clear paging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE system control\u003c\/strong\u003e — Commission, control, and supervise multiple amplifiers from one interface (firmware 2.x or higher).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24\/7 install design\u003c\/strong\u003e — Front-to-rear 3-stage fan cooling and power-saving standby for continuous commercial operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 1RU chassis\u003c\/strong\u003e — At 12.9 kg (28.4 lb), it fits easily into space-constrained equipment racks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference rooms and boardrooms\u003c\/li\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eGovernment and civic spaces\u003c\/li\u003e\n\u003cli\u003eTraining rooms\u003c\/li\u003e\n\u003cli\u003eMulti-purpose and all-hands rooms\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMaximum Output Power\u003c\/th\u003e\n\u003cth\u003e2 Ω\u003c\/th\u003e\n\u003cth\u003e2.6 Ω\u003c\/th\u003e\n\u003cth\u003e4 Ω\u003c\/th\u003e\n\u003cth\u003e8 Ω\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Channel\u003c\/td\u003e\n\u003ctd\u003e1100 W\u003c\/td\u003e\n\u003ctd\u003e950 W\u003c\/td\u003e\n\u003ctd\u003e660 W\u003c\/td\u003e\n\u003ctd\u003e350 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual Channel\u003c\/td\u003e\n\u003ctd\u003e1000 W\u003c\/td\u003e\n\u003ctd\u003e850 W\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003ctd\u003e320 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridged\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e2000 W\u003c\/td\u003e\n\u003ctd\u003e1200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;margin-top:12px;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (70 V, Bridged)\u003c\/td\u003e\n\u003ctd\u003e1 x 625 W (0.0 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass AB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum RMS Voltage Swing (THD 1%, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e55.3 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD at 450 W \/ 4 Ω\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e10 Hz to 21 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-Noise Ratio (A-weighted, ref. max @ 8 Ω)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 104 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+21 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance (active balanced)\u003c\/td\u003e\n\u003ctd\u003e20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Processing\u003c\/td\u003e\n\u003ctd\u003eFIR filters, audio limiters, output and array delay, 10-band user PEQ, 5-band array EQ per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Control\u003c\/td\u003e\n\u003ctd\u003eSONICUE sound system software\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V \/ 120 V \/ 230 V \/ 240 V; 50–60 Hz (factory configured)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption (1\/8 max @ 4 Ω)\u003c\/td\u003e\n\u003ctd\u003e550 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, 3-stage fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5°C to +40°C (40°F to +105°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88 x 462.4 mm (1RU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e12.9 kg (28.4 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Class\u003c\/td\u003e\n\u003ctd\u003eClass I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord C1300FDi datasheet. Data subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the C1300FDi support 70 V loudspeaker lines?\u003c\/strong\u003e\u003cbr\u003eYes. It supports 70 V operation in bridged mode (1 x 625 W, 0.0 dB), alongside low-impedance operation at 2 Ω, 4 Ω, and 8 Ω.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the amplifier configured and controlled?\u003c\/strong\u003e\u003cbr\u003eSetup, tuning, and supervision run in SONICUE sound system software (firmware 2.x or higher), with FIR Drive presets, limiters, delay, and parametric EQ per channel. A front-panel LC display allows local control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it rated for continuous 24\/7 operation?\u003c\/strong\u003e\u003cbr\u003eYes. The C Series is purpose-built for 24\/7 fixed-install use, with front-to-rear 3-stage fan cooling and a power-saving standby mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe C1300FDi is a compact 1RU chassis (483 x 88 x 462.4 mm) weighing 12.9 kg (28.4 lb) and mounts in a standard 19-inch equipment rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it compare to other C Series models?\u003c\/strong\u003e\u003cbr\u003eThe C1300FDi is the most compact install model in this lineup. Step up to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1800fdi-dsp-power-amplifier\"\u003eC1800FDi\u003c\/a\u003e (2x950W) or \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c2800fdi-dsp-power-amplifier\"\u003eC2800FDi\u003c\/a\u003e (2x1400W) for larger systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eUnits are covered by the Dynacord manufacturer warranty. Contact the Creation Networks team for warranty terms, system design assistance, and project support.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":44090354041068,"sku":"C1300FDi","price":969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-c1300fdi-dsp-power-amplifier-creation-networks-14639.png?v=1757928319"},{"product_id":"dynacord-c1800fdi-dsp-power-amplifier","title":"Dynacord C1800FDi – 2x950W DSP Install Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Dynacord C1800FDi is a 2x950W DSP install power amplifier for fixed commercial AV systems that run 24\/7. This rack-mount power amplifier drives 70 V loudspeaker lines directly and supports low-impedance loads (2 Ω, 4 Ω, 8 Ω), making it a strong fit for distributed background music and voice paging. With FIR Drive speaker processing and SONICUE control, the C1800FDi delivers clean, repeatable performance in conference rooms, houses of worship, and government spaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-c1800fdi-dsp-power-amplifier-creation-networks-92785.png?v=1757930394\" alt=\"Dynacord C1800FDi 2x950W DSP install power amplifier\" style=\"max-width:100%;height:auto;\" loading=\"lazy\"\u003e\n\u003cp\u003eThe Dynacord C Series amplifiers are dedicated installation DSP amplifiers optimized for continuous 24\/7 operation. The C1800FDi delivers 2x950W (4 Ω) and drives 70 V loudspeaker lines directly at 2 x 1250 W (-1.5 dB) without external output transformers, alongside low-impedance operation at 2 Ω, 4 Ω, and 8 Ω. Its Class AB output stage provides clean amplification for background music and intelligible announcements. Fully integrated professional speaker processing with FIR Drive technology gives integrators loudspeaker presets, FIR filters, output delay, and parametric EQ per channel for accurate system tuning. SONICUE sound system software (firmware 2.x or higher) handles commissioning, control, and supervision across a rack of amplifiers, while a front-panel LC display supports local control during service. A power-saving standby mode keeps operating cost low in always-on 70V power amplifier systems. The 1RU chassis with front-to-rear cooling fits neatly into a populated commercial rack. For higher output per channel, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c2800fdi-dsp-power-amplifier\"\u003eDynacord C2800FDi\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi\u003c\/a\u003e, or view the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x950W power (4 Ω)\u003c\/strong\u003e — Dual-channel amplification sized for small-to-mid distributed-audio zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 V direct drive\u003c\/strong\u003e — Powers 70 V lines at 2 x 1250 W (-1.5 dB) without output transformers, lowering rack weight and cost.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive speaker processing\u003c\/strong\u003e — Manufacturer-grade presets and FIR filtering for accurate, repeatable loudspeaker tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass AB output stage\u003c\/strong\u003e — Clean amplification for background music and clear paging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE system control\u003c\/strong\u003e — Commission, control, and supervise multiple amplifiers from one interface (firmware 2.x or higher).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24\/7 install design\u003c\/strong\u003e — Front-to-rear 3-stage fan cooling and power-saving standby for continuous commercial operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-panel LC display\u003c\/strong\u003e — Local control and status monitoring without a connected computer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference rooms and boardrooms\u003c\/li\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eGovernment and civic spaces\u003c\/li\u003e\n\u003cli\u003eTraining rooms\u003c\/li\u003e\n\u003cli\u003eMulti-purpose and all-hands rooms\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMaximum Output Power\u003c\/th\u003e\n\u003cth\u003e2 Ω\u003c\/th\u003e\n\u003cth\u003e2.6 Ω\u003c\/th\u003e\n\u003cth\u003e4 Ω\u003c\/th\u003e\n\u003cth\u003e8 Ω\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Channel\u003c\/td\u003e\n\u003ctd\u003e1600 W\u003c\/td\u003e\n\u003ctd\u003e1300 W\u003c\/td\u003e\n\u003ctd\u003e950 W\u003c\/td\u003e\n\u003ctd\u003e480 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual Channel\u003c\/td\u003e\n\u003ctd\u003e1400 W\u003c\/td\u003e\n\u003ctd\u003e1200 W\u003c\/td\u003e\n\u003ctd\u003e850 W\u003c\/td\u003e\n\u003ctd\u003e450 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridged\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e2800 W\u003c\/td\u003e\n\u003ctd\u003e1700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;margin-top:12px;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (70 V, Dual Channel)\u003c\/td\u003e\n\u003ctd\u003e2 x 1250 W (-1.5 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass AB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum RMS Voltage Swing (THD 1%, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e65.1 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD at 600 W \/ 4 Ω\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e10 Hz to 21 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-Noise Ratio (A-weighted, ref. max @ 8 Ω)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 105 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+21 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance (active balanced)\u003c\/td\u003e\n\u003ctd\u003e20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Processing\u003c\/td\u003e\n\u003ctd\u003eFIR filters, audio limiters, output delay, parametric EQ per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Control\u003c\/td\u003e\n\u003ctd\u003eSONICUE sound system software\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V \/ 120 V \/ 230 V \/ 240 V; 50–60 Hz (factory configured)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption (1\/8 max @ 4 Ω)\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, 3-stage fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5°C to +40°C (40°F to +105°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88 x 462.4 mm (1RU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e15.2 kg (33.5 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Class\u003c\/td\u003e\n\u003ctd\u003eClass I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord C1800FDi datasheet. Data subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the C1800FDi drive 70 V loudspeaker lines without transformers?\u003c\/strong\u003e\u003cbr\u003eYes. The C1800FDi drives 70 V lines directly at 2 x 1250 W (-1.5 dB) without external output transformers, and also supports low-impedance loads at 2 Ω, 4 Ω, and 8 Ω.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the amplifier configured and controlled?\u003c\/strong\u003e\u003cbr\u003eSetup, tuning, and supervision run in SONICUE sound system software (firmware 2.x or higher), with FIR Drive presets, limiters, delay, and parametric EQ per channel. A front-panel LC display allows local control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it rated for continuous 24\/7 operation?\u003c\/strong\u003e\u003cbr\u003eYes. The C Series is purpose-built for 24\/7 fixed-install use, with front-to-rear 3-stage fan cooling and a power-saving standby mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe C1800FDi is a 1RU chassis (483 x 88 x 462.4 mm) weighing 15.2 kg (33.5 lb) and mounts in a standard 19-inch equipment rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it compare to other C Series models?\u003c\/strong\u003e\u003cbr\u003eThe C1800FDi is the entry low-impedance install model in this lineup. Step up to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c2800fdi-dsp-power-amplifier\"\u003eC2800FDi\u003c\/a\u003e (2x1400W) or \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eC3600FDi\u003c\/a\u003e (2x1800W) for larger systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eUnits are covered by the Dynacord manufacturer warranty. Contact the Creation Networks team for warranty terms, system design assistance, and project support.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":44276818706668,"sku":"C1800FDi","price":1542.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-c1800fdi-dsp-power-amplifier-creation-networks-92785.png?v=1757930394"},{"product_id":"dynacord-c2800fdi-dsp-power-amplifier","title":"Dynacord C2800FDi – 2x1400W DSP Install Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Dynacord C2800FDi is a 2x1400W DSP install power amplifier designed for fixed commercial AV systems running 24\/7. It is the recommended C Series model for 70 V direct drive, powering distributed loudspeaker lines at 2 x 1250 W without output transformers, and also supports low-impedance loads. With FIR Drive speaker processing and SONICUE control, this rack-mount power amplifier delivers clean background music and intelligible paging in conference rooms, houses of worship, and government spaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-c2800fdi-dsp-power-amplifier-creation-networks-74036.png?v=1757930404\" alt=\"Dynacord C2800FDi 2x1400W DSP install power amplifier\" style=\"max-width:100%;height:auto;\" loading=\"lazy\"\u003e\n\u003cp\u003eThe Dynacord C Series amplifiers are dedicated installation DSP amplifiers optimized for continuous 24\/7 operation. The C2800FDi delivers 2x1400W (4 Ω) and is the recommended amplifier for 70 V direct drive, supplying 2 x 1250 W (0.0 dB) to constant-voltage loudspeaker lines without external output transformers. It can also drive 100 V lines and low-impedance loads at 2 Ω, 4 Ω, and 8 Ω, giving integrators flexibility across mixed loudspeaker designs. The Class H output stage balances efficiency and headroom for clear program audio and announcements. Fully integrated professional speaker processing with FIR Drive technology provides loudspeaker presets, FIR filters, output delay, and parametric EQ per channel. SONICUE sound system software (firmware 2.x or higher) handles commissioning, control, and supervision across an amplifier rack, while a front-panel LC display supports local control. A power-saving standby mode lowers the cost of ownership in always-on 70V\/100V power amplifier systems. The 1RU chassis with front-to-rear cooling integrates cleanly into commercial racks. For more or fewer watts per zone, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1800fdi-dsp-power-amplifier\"\u003eDynacord C1800FDi\u003c\/a\u003e, or view the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x1400W power (4 Ω)\u003c\/strong\u003e — Dual-channel amplification sized for mid-to-large distributed-audio zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended for 70 V direct drive\u003c\/strong\u003e — Supplies 2 x 1250 W (0.0 dB) to 70 V lines without output transformers, reducing rack weight and cost.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive speaker processing\u003c\/strong\u003e — Manufacturer-grade presets and FIR filtering for accurate, repeatable loudspeaker tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass H output stage\u003c\/strong\u003e — Efficient operation with the headroom needed for clean music and clear paging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE system control\u003c\/strong\u003e — Commission, control, and supervise multiple amplifiers from one interface (firmware 2.x or higher).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24\/7 install design\u003c\/strong\u003e — Front-to-rear 3-stage fan cooling and power-saving standby for continuous commercial use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-panel LC display\u003c\/strong\u003e — Local control and status monitoring without a connected computer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConference rooms and boardrooms\u003c\/li\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eGovernment and civic spaces\u003c\/li\u003e\n\u003cli\u003eAuditoriums\u003c\/li\u003e\n\u003cli\u003eMulti-purpose and all-hands rooms\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMaximum Output Power\u003c\/th\u003e\n\u003cth\u003e2 Ω\u003c\/th\u003e\n\u003cth\u003e2.7 Ω\u003c\/th\u003e\n\u003cth\u003e4 Ω\u003c\/th\u003e\n\u003cth\u003e8 Ω\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Channel\u003c\/td\u003e\n\u003ctd\u003e2300 W\u003c\/td\u003e\n\u003ctd\u003e2000 W\u003c\/td\u003e\n\u003ctd\u003e1400 W\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual Channel\u003c\/td\u003e\n\u003ctd\u003e2200 W\u003c\/td\u003e\n\u003ctd\u003e1800 W\u003c\/td\u003e\n\u003ctd\u003e1300 W\u003c\/td\u003e\n\u003ctd\u003e650 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridged\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e4400 W\u003c\/td\u003e\n\u003ctd\u003e2600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;margin-top:12px;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (70 V, Dual Channel)\u003c\/td\u003e\n\u003ctd\u003e2 x 1250 W (0.0 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (100 V, Dual Channel)\u003c\/td\u003e\n\u003ctd\u003e2 x 1250 W (-3.0 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum RMS Voltage Swing (THD 1%, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e78.8 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD at 900 W \/ 4 Ω\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e10 Hz to 21 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-Noise Ratio (A-weighted, ref. max @ 8 Ω)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 107 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+21 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance (active balanced)\u003c\/td\u003e\n\u003ctd\u003e20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Processing\u003c\/td\u003e\n\u003ctd\u003eFIR filters, audio limiters, output delay, parametric EQ per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Control\u003c\/td\u003e\n\u003ctd\u003eSONICUE sound system software\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V \/ 120 V \/ 230 V \/ 240 V; 50–60 Hz (factory configured)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption (1\/8 max @ 4 Ω)\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, 3-stage fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5°C to +40°C (40°F to +105°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88 x 462.4 mm (1RU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e16.2 kg (35.7 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Class\u003c\/td\u003e\n\u003ctd\u003eClass I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord C2800FDi datasheet. Data subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the C2800FDi the right choice for 70 V loudspeaker lines?\u003c\/strong\u003e\u003cbr\u003eYes. The C2800FDi is the recommended C Series amplifier for 70 V direct drive, supplying 2 x 1250 W (0.0 dB) without output transformers. It also drives 100 V lines and low-impedance loads at 2 Ω, 4 Ω, and 8 Ω.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it configured and controlled?\u003c\/strong\u003e\u003cbr\u003eSetup, tuning, and supervision run in SONICUE sound system software (firmware 2.x or higher), with FIR Drive presets, limiters, delay, and parametric EQ per channel. A front-panel LC display allows local control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it rated for 24\/7 operation?\u003c\/strong\u003e\u003cbr\u003eYes. The C Series is built for continuous fixed-install use, with front-to-rear 3-stage fan cooling and a power-saving standby mode for low operating cost.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe C2800FDi is a 1RU chassis (483 x 88 x 462.4 mm) weighing 16.2 kg (35.7 lb) and fits a standard 19-inch equipment rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it compare to other C Series models?\u003c\/strong\u003e\u003cbr\u003eStep up to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eC3600FDi\u003c\/a\u003e (2x1800W) for higher output, or down to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1800fdi-dsp-power-amplifier\"\u003eC1800FDi\u003c\/a\u003e (2x950W) for smaller zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eUnits are covered by the Dynacord manufacturer warranty. Contact the Creation Networks team for warranty terms, system design assistance, and project support.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":44276821655788,"sku":"C2800FDi","price":1942.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-c2800fdi-dsp-power-amplifier-creation-networks-74036.png?v=1757930404"},{"product_id":"dynacord-c3600fdi-dsp-power-amplifier","title":"Dynacord C3600FDi – 2x1800W DSP Install Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Dynacord C3600FDi is a 2x1800W DSP install power amplifier engineered for fixed commercial AV systems that operate around the clock. Optimized for 24\/7 operation, this rack-mount power amplifier drives low-impedance loads (2 Ω, 4 Ω, 8 Ω) and 100 V loudspeaker lines directly, making it well suited to multi-zone background music and voice paging. Integrated FIR Drive speaker processing and SONICUE system control give integrators precise tuning across boardrooms, houses of worship, and large meeting spaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-c3600fdi-dsp-power-amplifier-creation-networks-82737.png?v=1757930406\" alt=\"Dynacord C3600FDi 2x1800W DSP install power amplifier\" style=\"max-width:100%;height:auto;\" loading=\"lazy\"\u003e\n\u003cp\u003eThe Dynacord C Series amplifiers are dedicated installation DSP amplifiers optimized for continuous 24\/7 operation. The C3600FDi delivers 2x1800W (4 Ω) of usable power and can drive 100 V loudspeaker lines directly (-1.5 dB) without external output transformers, simplifying distributed-audio wiring in commercial installs. Its Class H output stage pairs high efficiency with the headroom required for clean program material and clear announcements. Fully integrated professional speaker processing with FIR Drive technology lets system designers apply manufacturer-grade loudspeaker presets, FIR filters, output delay, and parametric EQ per channel. Setup and supervision run through SONICUE sound system software (firmware 2.x or higher), so a multi-amplifier rack can be commissioned, controlled, and monitored from one interface. A front-panel LC display supports local control and status checks during service. A power-saving standby mode reduces operating cost across large 70V\/100V power amplifier deployments. The connectivity is optimized for fixed installation, and the 1RU chassis with front-to-rear cooling fits cleanly into a populated equipment rack. For higher-density zoning, compare it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c2800fdi-dsp-power-amplifier\"\u003eDynacord C2800FDi\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1800fdi-dsp-power-amplifier\"\u003eDynacord C1800FDi\u003c\/a\u003e, or view the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x1800W power (4 Ω)\u003c\/strong\u003e — High-output dual-channel amplification covers demanding distributed-audio and full-range loudspeaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect 100 V drive\u003c\/strong\u003e — Drives 100 V lines directly (-1.5 dB) without output transformers, reducing rack weight and install cost.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive speaker processing\u003c\/strong\u003e — Provides manufacturer-grade loudspeaker presets and FIR filtering for accurate, repeatable tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass H output stage\u003c\/strong\u003e — Combines high efficiency with the headroom needed for clean program audio and intelligible paging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE system control\u003c\/strong\u003e — Commission, control, and supervise multiple amplifiers from one software interface (firmware 2.x or higher).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24\/7 install design\u003c\/strong\u003e — Front-to-rear 3-stage fan cooling and a power-saving standby mode suit continuous commercial operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-panel LC display\u003c\/strong\u003e — Enables local control and status monitoring without a connected computer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eBoardrooms and conference rooms\u003c\/li\u003e\n\u003cli\u003eAuditoriums\u003c\/li\u003e\n\u003cli\u003eGovernment and civic spaces\u003c\/li\u003e\n\u003cli\u003eMulti-purpose and all-hands rooms\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMaximum Output Power\u003c\/th\u003e\n\u003cth\u003e2 Ω\u003c\/th\u003e\n\u003cth\u003e2.7 Ω\u003c\/th\u003e\n\u003cth\u003e4 Ω\u003c\/th\u003e\n\u003cth\u003e8 Ω\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Channel\u003c\/td\u003e\n\u003ctd\u003e3200 W\u003c\/td\u003e\n\u003ctd\u003e2700 W\u003c\/td\u003e\n\u003ctd\u003e1800 W\u003c\/td\u003e\n\u003ctd\u003e950 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual Channel\u003c\/td\u003e\n\u003ctd\u003e3000 W\u003c\/td\u003e\n\u003ctd\u003e2500 W\u003c\/td\u003e\n\u003ctd\u003e1700 W\u003c\/td\u003e\n\u003ctd\u003e900 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridged\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e6000 W\u003c\/td\u003e\n\u003ctd\u003e3400 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;margin-top:12px;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (100 V, Dual Channel)\u003c\/td\u003e\n\u003ctd\u003e2 x 1250 W (-1.5 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum RMS Voltage Swing (THD 1%, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e90.6 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD at 1200 W \/ 4 Ω\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e10 Hz to 21 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-Noise Ratio (A-weighted, ref. max @ 8 Ω)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 109 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+21 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance (active balanced)\u003c\/td\u003e\n\u003ctd\u003e20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Processing\u003c\/td\u003e\n\u003ctd\u003eFIR filters, audio limiters, output delay, parametric EQ per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Control\u003c\/td\u003e\n\u003ctd\u003eSONICUE sound system software\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V \/ 120 V \/ 230 V \/ 240 V; 50–60 Hz (factory configured)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption (1\/8 max @ 4 Ω)\u003c\/td\u003e\n\u003ctd\u003e850 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, 3-stage fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5°C to +40°C (40°F to +105°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88 x 462.4 mm (1RU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e18.2 kg (40.1 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Class\u003c\/td\u003e\n\u003ctd\u003eClass I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord C3600FDi datasheet. Data subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the C3600FDi drive 70 V and 100 V loudspeaker lines without transformers?\u003c\/strong\u003e\u003cbr\u003eYes. The C3600FDi drives 100 V lines directly (-1.5 dB) without external output transformers, and also supports low-impedance operation at 2 Ω, 4 Ω, and 8 Ω.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the amplifier configured and controlled in an AV system?\u003c\/strong\u003e\u003cbr\u003eConfiguration, tuning, and supervision are handled in SONICUE sound system software (firmware version 2.x or higher), with FIR Drive presets, limiters, delay, and parametric EQ applied per channel. A front-panel LC display allows local control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it rated for continuous 24\/7 installed operation?\u003c\/strong\u003e\u003cbr\u003eYes. The C Series is purpose-built for 24\/7 fixed-install use, with front-to-rear 3-stage fan cooling and a power-saving standby mode for low operating cost.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe C3600FDi is a 1RU chassis (483 x 88 x 462.4 mm) weighing 18.2 kg (40.1 lb) and mounts in a standard 19-inch equipment rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it compare to other Dynacord C Series amplifiers?\u003c\/strong\u003e\u003cbr\u003eThe C3600FDi is the highest-output install model. Step down to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c2800fdi-dsp-power-amplifier\"\u003eC2800FDi\u003c\/a\u003e (2x1400W) or \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1800fdi-dsp-power-amplifier\"\u003eC1800FDi\u003c\/a\u003e (2x950W) for smaller zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eUnits are covered by the Dynacord manufacturer warranty. Contact the Creation Networks team for warranty terms, system design assistance, and project support.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":44276825063660,"sku":"C3600FDI","price":2335.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-c3600fdi-dsp-power-amplifier-creation-networks-82737.png?v=1757930406"},{"product_id":"dynacord-l1300fd-us-power-amplifier-for-live-performance-applications","title":"Dynacord L1300FD-US – 2x650W DSP Live Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Dynacord L1300FD-US is a 2x650W DSP power amplifier built for live performance and mobile sound applications. This dual-channel touring amplifier provides true 2-ohm stability and integrated FIR Drive speaker processing for consistent output and accurate loudspeaker tuning across venues and rigs. With a Class AB output stage and SONICUE system control, the L1300FD-US is a compact, dependable rack-mount power amplifier for houses of worship, multi-purpose rooms, and portable production systems.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-l1300fd-us-power-amplifier-for-live-performance-applications-creation-networks-44458.png?v=1757930405\" alt=\"Dynacord L1300FD-US 2x650W DSP live performance power amplifier\" style=\"max-width:100%;height:auto;\" loading=\"lazy\"\u003e\n\u003cp\u003eThe Dynacord L Series are professional dual-channel audio amplifiers for live and mobile applications. The L1300FD-US delivers 2x650W and maintains true 2-ohm stability, holding performance into the demanding loudspeaker loads found in touring and rental inventories. Fully integrated professional speaker processing with FIR Drive technology provides FIR filters, output and array delay, 10-band user parametric EQ, and 5-band array EQ per channel for fast, repeatable tuning. The Class AB output stage delivers market-leading acoustic performance and reliability for daily use. A front-panel LC display allows local control and supervision, while SONICUE sound system software (firmware 2.x or higher) manages setup, control, and monitoring across a multi-amplifier rack. Connectivity is optimized for the needs of mobile applications, and the lightweight 2RU chassis with front-to-rear cooling withstands transport and load-in. As an entry-point live performance DSP amplifier, it serves smaller stages, fill systems, and portable rigs. For more output per channel, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l1800fd-us-power-amplifier-for-live-performance-applications\"\u003eDynacord L1800FD-US\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l2800fd-us-power-amplifier-for-live-performance-applications\"\u003eDynacord L2800FD-US\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x650W power\u003c\/strong\u003e — Dual-channel amplification for stage fills, monitors, and smaller live loudspeaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 2-ohm stability\u003c\/strong\u003e — Holds rated performance into low-impedance loads common in touring and rental rigs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive speaker processing\u003c\/strong\u003e — Manufacturer-grade FIR filtering and presets for accurate, repeatable loudspeaker tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass AB output stage\u003c\/strong\u003e — Market-leading acoustic performance and reliability for daily operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE system control\u003c\/strong\u003e — Fast setup, flexible control, and full supervision of multiple amplifiers from one interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard DSP\u003c\/strong\u003e — Output and array delay, 10-band user PEQ, and 5-band array EQ per channel for detailed alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight 2RU chassis\u003c\/strong\u003e — At 12.9 kg (28.4 lb), it is easy to transport and rack for mobile production.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eAuditoriums and performing arts venues\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eAll-hands rooms\u003c\/li\u003e\n\u003cli\u003eBroadcast studios\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMaximum Output Power\u003c\/th\u003e\n\u003cth\u003e2 Ω\u003c\/th\u003e\n\u003cth\u003e2.6 Ω\u003c\/th\u003e\n\u003cth\u003e4 Ω\u003c\/th\u003e\n\u003cth\u003e8 Ω\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Channel\u003c\/td\u003e\n\u003ctd\u003e1100 W\u003c\/td\u003e\n\u003ctd\u003e950 W\u003c\/td\u003e\n\u003ctd\u003e660 W\u003c\/td\u003e\n\u003ctd\u003e350 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual Channel\u003c\/td\u003e\n\u003ctd\u003e1000 W\u003c\/td\u003e\n\u003ctd\u003e850 W\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003ctd\u003e320 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridged\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e2000 W\u003c\/td\u003e\n\u003ctd\u003e1200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;margin-top:12px;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass AB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum RMS Voltage Swing (THD 1%, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e55.3 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD at 450 W \/ 4 Ω\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e10 Hz to 21 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-Noise Ratio (A-weighted, ref. max @ 8 Ω)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 104 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+21 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance (active balanced)\u003c\/td\u003e\n\u003ctd\u003e20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Processing\u003c\/td\u003e\n\u003ctd\u003eFIR filters, audio limiters, output and array delay, 10-band user PEQ, 5-band array EQ per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Control\u003c\/td\u003e\n\u003ctd\u003eSONICUE sound system software (firmware 2.x or higher)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V \/ 120 V \/ 230 V \/ 240 V; 50–60 Hz (factory configured)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption (1\/8 max @ 4 Ω)\u003c\/td\u003e\n\u003ctd\u003e550 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, 3-stage fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5°C to +40°C (40°F to +105°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88 x 462.4 mm (2RU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e12.9 kg (28.4 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Class\u003c\/td\u003e\n\u003ctd\u003eClass I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord L1300FD datasheet. Data subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the L1300FD-US stable into 2-ohm loads?\u003c\/strong\u003e\u003cbr\u003eYes. The L Series offers true 2-ohm stability, so the L1300FD-US holds performance into the low-impedance loudspeaker loads common in live and touring systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat DSP and processing are built in?\u003c\/strong\u003e\u003cbr\u003eIt includes FIR Drive speaker processing with FIR filters, audio limiters, output and array delay, 10-band user parametric EQ, and 5-band array EQ per channel, managed in SONICUE software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it controlled in a larger system?\u003c\/strong\u003e\u003cbr\u003eSONICUE sound system software (firmware 2.x or higher) provides fast setup, flexible control, and full supervision across multiple amplifiers; a front-panel LC display allows local control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space does it need?\u003c\/strong\u003e\u003cbr\u003eThe L1300FD-US is a 2RU chassis (483 x 88 x 462.4 mm) weighing 12.9 kg (28.4 lb) and mounts in a standard 19-inch rack for touring or fixed use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it compare to other L Series amplifiers?\u003c\/strong\u003e\u003cbr\u003eThe L1300FD-US is the entry live model in this lineup. Step up to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l1800fd-us-power-amplifier-for-live-performance-applications\"\u003eL1800FD-US\u003c\/a\u003e (2x950W) or \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l2800fd-us-power-amplifier-for-live-performance-applications\"\u003eL2800FD-US\u003c\/a\u003e (2x1400W) for more output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eUnits are covered by the Dynacord manufacturer warranty. Contact the Creation Networks team for warranty terms, system design help, and production support.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":44276829782252,"sku":"L1300FD-US","price":1107.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-l1300fd-us-power-amplifier-for-live-performance-applications-creation-networks-44458.png?v=1757930405"},{"product_id":"dynacord-l1800fd-us-power-amplifier-for-live-performance-applications","title":"Dynacord L1800FD-US – 2x950W DSP Live Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Dynacord L1800FD-US is a 2x950W DSP power amplifier built for live performance and mobile sound applications. This dual-channel touring amplifier provides true 2-ohm stability and integrated FIR Drive speaker processing for consistent output and accurate loudspeaker tuning across venues and rigs. With a Class AB output stage and SONICUE system control, the L1800FD-US is a dependable rack-mount power amplifier for auditoriums, houses of worship, and portable production systems.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-l1800fd-us-power-amplifier-for-live-performance-applications-creation-networks-24991.png?v=1757930406\" alt=\"Dynacord L1800FD-US 2x950W DSP live performance power amplifier\" style=\"max-width:100%;height:auto;\" loading=\"lazy\"\u003e\n\u003cp\u003eThe Dynacord L Series are professional dual-channel audio amplifiers for live and mobile applications. The L1800FD-US delivers 2x950W (4 Ω) and maintains true 2-ohm stability, holding performance into the demanding loudspeaker loads found in touring and rental inventories. Fully integrated professional speaker processing with FIR Drive technology provides FIR filters, output and array delay, 10-band user parametric EQ, and 5-band array EQ per channel for fast, repeatable tuning. The Class AB output stage delivers market-leading acoustic performance and reliability for daily use. A front-panel LC display allows local control and supervision, while SONICUE sound system software (firmware 2.x or higher) manages setup, control, and monitoring across a multi-amplifier rack. Connectivity is optimized for the needs of mobile applications, and the 2RU chassis with front-to-rear cooling withstands transport and load-in. As a live performance DSP amplifier, it serves both fixed venues and portable rigs. For different power points in the same line, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l2800fd-us-power-amplifier-for-live-performance-applications\"\u003eDynacord L2800FD-US\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l1300fd-us-power-amplifier-for-live-performance-applications\"\u003eDynacord L1300FD-US\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x950W power (4 Ω)\u003c\/strong\u003e — Dual-channel amplification for full-range loudspeaker loads in live systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 2-ohm stability\u003c\/strong\u003e — Holds rated performance into low-impedance loads common in touring and rental rigs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive speaker processing\u003c\/strong\u003e — Manufacturer-grade FIR filtering and presets for accurate, repeatable loudspeaker tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass AB output stage\u003c\/strong\u003e — Market-leading acoustic performance and reliability for daily operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE system control\u003c\/strong\u003e — Fast setup, flexible control, and full supervision of multiple amplifiers from one interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard DSP\u003c\/strong\u003e — Output and array delay, 10-band user PEQ, and 5-band array EQ per channel for detailed alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-panel LC display\u003c\/strong\u003e — Local control and status monitoring at the rack without a computer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAuditoriums and performing arts venues\u003c\/li\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eAll-hands rooms\u003c\/li\u003e\n\u003cli\u003eBroadcast studios\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMaximum Output Power\u003c\/th\u003e\n\u003cth\u003e2 Ω\u003c\/th\u003e\n\u003cth\u003e2.6 Ω\u003c\/th\u003e\n\u003cth\u003e4 Ω\u003c\/th\u003e\n\u003cth\u003e8 Ω\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Channel\u003c\/td\u003e\n\u003ctd\u003e1600 W\u003c\/td\u003e\n\u003ctd\u003e1300 W\u003c\/td\u003e\n\u003ctd\u003e950 W\u003c\/td\u003e\n\u003ctd\u003e480 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual Channel\u003c\/td\u003e\n\u003ctd\u003e1400 W\u003c\/td\u003e\n\u003ctd\u003e1200 W\u003c\/td\u003e\n\u003ctd\u003e850 W\u003c\/td\u003e\n\u003ctd\u003e450 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridged\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e2800 W\u003c\/td\u003e\n\u003ctd\u003e1700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;margin-top:12px;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass AB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum RMS Voltage Swing (THD 1%, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e65.1 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD at 600 W \/ 4 Ω\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e10 Hz to 21 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-Noise Ratio (A-weighted, ref. max @ 8 Ω)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 105 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+21 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance (active balanced)\u003c\/td\u003e\n\u003ctd\u003e20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Processing\u003c\/td\u003e\n\u003ctd\u003eFIR filters, audio limiters, output and array delay, 10-band user PEQ, 5-band array EQ per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Control\u003c\/td\u003e\n\u003ctd\u003eSONICUE sound system software (firmware 2.x or higher)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V \/ 120 V \/ 230 V \/ 240 V; 50–60 Hz (factory configured)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption (1\/8 max @ 4 Ω)\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, 3-stage fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5°C to +40°C (40°F to +105°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88 x 462.4 mm (2RU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e15.2 kg (33.5 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Class\u003c\/td\u003e\n\u003ctd\u003eClass I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord L1800FD datasheet. Data subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the L1800FD-US stable into 2-ohm loads?\u003c\/strong\u003e\u003cbr\u003eYes. The L Series offers true 2-ohm stability, so the L1800FD-US holds performance into the low-impedance loudspeaker loads common in live and touring systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat DSP and processing are built in?\u003c\/strong\u003e\u003cbr\u003eIt includes FIR Drive speaker processing with FIR filters, audio limiters, output and array delay, 10-band user parametric EQ, and 5-band array EQ per channel, managed in SONICUE software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it controlled in a larger system?\u003c\/strong\u003e\u003cbr\u003eSONICUE sound system software (firmware 2.x or higher) provides fast setup, flexible control, and full supervision across multiple amplifiers; a front-panel LC display allows local control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space does it need?\u003c\/strong\u003e\u003cbr\u003eThe L1800FD-US is a 2RU chassis (483 x 88 x 462.4 mm) weighing 15.2 kg (33.5 lb) and mounts in a standard 19-inch rack for touring or fixed use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it compare to other L Series amplifiers?\u003c\/strong\u003e\u003cbr\u003eStep up to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l2800fd-us-power-amplifier-for-live-performance-applications\"\u003eL2800FD-US\u003c\/a\u003e (2x1400W) for more headroom, or down to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l1300fd-us-power-amplifier-for-live-performance-applications\"\u003eL1300FD-US\u003c\/a\u003e (2x650W).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eUnits are covered by the Dynacord manufacturer warranty. Contact the Creation Networks team for warranty terms, system design help, and production support.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":44276832927980,"sku":"L1800FD-US","price":1400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-l1800fd-us-power-amplifier-for-live-performance-applications-creation-networks-24991.png?v=1757930406"},{"product_id":"dynacord-l2800fd-us-power-amplifier-for-live-performance-applications","title":"Dynacord L2800FD-US – 2x1400W DSP Live Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Dynacord L2800FD-US is a 2x1400W DSP power amplifier built for live performance and mobile sound applications. This dual-channel touring amplifier offers true 2-ohm stability and integrated FIR Drive speaker processing for consistent output and accurate loudspeaker tuning across changing rooms and rigs. With a Class H output stage and SONICUE system control, the L2800FD-US is a reliable rack-mount power amplifier for auditoriums, houses of worship, and production systems.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-l2800fd-us-power-amplifier-for-live-performance-applications-creation-networks-82688.png?v=1757930407\" alt=\"Dynacord L2800FD-US 2x1400W DSP live performance power amplifier\" style=\"max-width:100%;height:auto;\" loading=\"lazy\"\u003e\n\u003cp\u003eThe Dynacord L Series are professional dual-channel audio amplifiers for live and mobile applications. The L2800FD-US delivers 2x1400W (4 Ω) and maintains true 2-ohm stability, holding performance into the demanding loudspeaker loads found in touring and rental inventories. Fully integrated professional speaker processing with FIR Drive technology provides FIR filters, output and array delay, 10-band user parametric EQ, and 5-band array EQ per channel for fast, repeatable system tuning. The Class H output stage delivers market-leading acoustic performance with the efficiency required for long events. A front-panel LC display allows local control and supervision, while SONICUE sound system software (firmware 2.x or higher) manages setup, control, and monitoring across a multi-amplifier rack. Connectivity is optimized for the needs of mobile applications, and the 2RU chassis with front-to-rear cooling withstands daily transport and load-in. As a live performance DSP amplifier, it serves both fixed venues and portable production rigs. For different power points in the same line, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l3600fd-us-power-amplifier-for-live-performance-applications\"\u003eDynacord L3600FD-US\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l1800fd-us-power-amplifier-for-live-performance-applications\"\u003eDynacord L1800FD-US\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x1400W power (4 Ω)\u003c\/strong\u003e — Dual-channel amplification for full-range and subwoofer loads in live systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 2-ohm stability\u003c\/strong\u003e — Holds rated performance into low-impedance loads common in touring and rental rigs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive speaker processing\u003c\/strong\u003e — Manufacturer-grade FIR filtering and presets for accurate, repeatable loudspeaker tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass H output stage\u003c\/strong\u003e — Efficient operation with the headroom and reliability needed for long show days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE system control\u003c\/strong\u003e — Fast setup, flexible control, and full supervision of multiple amplifiers from one interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard DSP\u003c\/strong\u003e — Output and array delay, 10-band user PEQ, and 5-band array EQ per channel for detailed alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-panel LC display\u003c\/strong\u003e — Local control and status monitoring at the rack without a computer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAuditoriums and performing arts venues\u003c\/li\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eAll-hands rooms\u003c\/li\u003e\n\u003cli\u003eBroadcast studios\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMaximum Output Power\u003c\/th\u003e\n\u003cth\u003e2 Ω\u003c\/th\u003e\n\u003cth\u003e2.7 Ω\u003c\/th\u003e\n\u003cth\u003e4 Ω\u003c\/th\u003e\n\u003cth\u003e8 Ω\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Channel\u003c\/td\u003e\n\u003ctd\u003e2300 W\u003c\/td\u003e\n\u003ctd\u003e2000 W\u003c\/td\u003e\n\u003ctd\u003e1400 W\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual Channel\u003c\/td\u003e\n\u003ctd\u003e2200 W\u003c\/td\u003e\n\u003ctd\u003e1800 W\u003c\/td\u003e\n\u003ctd\u003e1300 W\u003c\/td\u003e\n\u003ctd\u003e650 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridged\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e4400 W\u003c\/td\u003e\n\u003ctd\u003e2600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;margin-top:12px;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum RMS Voltage Swing (THD 1%, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e78.8 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD at 900 W \/ 4 Ω\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e10 Hz to 21 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-Noise Ratio (A-weighted, ref. max @ 8 Ω)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 107 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+21 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance (active balanced)\u003c\/td\u003e\n\u003ctd\u003e20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Processing\u003c\/td\u003e\n\u003ctd\u003eFIR filters, audio limiters, output and array delay, 10-band user PEQ, 5-band array EQ per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Control\u003c\/td\u003e\n\u003ctd\u003eSONICUE sound system software (firmware 2.x or higher)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V \/ 120 V \/ 230 V \/ 240 V; 50–60 Hz (factory configured)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption (1\/8 max @ 4 Ω)\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, 3-stage fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5°C to +40°C (40°F to +105°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88 x 462.4 mm (2RU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e16.2 kg (35.7 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Class\u003c\/td\u003e\n\u003ctd\u003eClass I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord L2800FD datasheet. Data subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the L2800FD-US stable into 2-ohm loads?\u003c\/strong\u003e\u003cbr\u003eYes. The L Series offers true 2-ohm stability, so the L2800FD-US holds performance into the low-impedance loudspeaker loads common in live and touring systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat DSP and processing are built in?\u003c\/strong\u003e\u003cbr\u003eIt includes FIR Drive speaker processing with FIR filters, audio limiters, output and array delay, 10-band user parametric EQ, and 5-band array EQ per channel, managed in SONICUE software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it controlled in a larger system?\u003c\/strong\u003e\u003cbr\u003eSONICUE sound system software (firmware 2.x or higher) provides fast setup, flexible control, and full supervision across multiple amplifiers; a front-panel LC display allows local control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space does it need?\u003c\/strong\u003e\u003cbr\u003eThe L2800FD-US is a 2RU chassis (483 x 88 x 462.4 mm) weighing 16.2 kg (35.7 lb) and mounts in a standard 19-inch rack for touring or fixed use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it compare to other L Series amplifiers?\u003c\/strong\u003e\u003cbr\u003eStep up to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l3600fd-us-power-amplifier-for-live-performance-applications\"\u003eL3600FD-US\u003c\/a\u003e (2x1800W) for more headroom, or down to the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l1800fd-us-power-amplifier-for-live-performance-applications\"\u003eL1800FD-US\u003c\/a\u003e (2x950W).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eUnits are covered by the Dynacord manufacturer warranty. Contact the Creation Networks team for warranty terms, system design help, and production support.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":44276835811564,"sku":"L2800FD-US","price":1772.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-l2800fd-us-power-amplifier-for-live-performance-applications-creation-networks-82688.png?v=1757930407"},{"product_id":"dynacord-l3600fd-us-power-amplifier-for-live-performance-applications","title":"Dynacord L3600FD-US – 2x1800W DSP Live Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Dynacord L3600FD-US is a 2x1800W DSP power amplifier built for live performance and mobile sound applications. This dual-channel touring amplifier delivers true 2-ohm stability and integrated FIR Drive speaker processing, giving sound engineers consistent output and accurate loudspeaker tuning night after night. With a Class H output stage and SONICUE system control, the L3600FD-US is a dependable rack-mount power amplifier for auditoriums, houses of worship, and production rigs.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-l3600fd-us-power-amplifier-for-live-performance-applications-creation-networks-57954.png?v=1757930408\" alt=\"Dynacord L3600FD-US 2x1800W DSP live performance power amplifier\" style=\"max-width:100%;height:auto;\" loading=\"lazy\"\u003e\n\u003cp\u003eThe Dynacord L Series are professional dual-channel audio amplifiers for live and mobile applications. The L3600FD-US delivers 2x1800W (4 Ω) and maintains true 2-ohm stability, so it holds performance into demanding loudspeaker loads typical of touring and rental inventories. Fully integrated professional speaker processing with FIR Drive technology provides FIR filters, output and array delay, 10-band user parametric EQ, and 5-band array EQ per channel, letting engineers dial in systems quickly and repeatably. The Class H output stage delivers market-leading acoustic performance with the efficiency needed for long show days. A front-panel LC display allows local control and supervision, while SONICUE sound system software (firmware 2.x or higher) handles fast setup, flexible control, and comprehensive monitoring across a multi-amplifier rack. Connectivity is optimized for the needs of mobile applications, and the 2RU chassis with front-to-rear cooling stands up to the rigors of transport and daily load-in. As a live performance DSP amplifier, it suits both fixed venues and portable production systems. For lower-power channels in the same line, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l2800fd-us-power-amplifier-for-live-performance-applications\"\u003eDynacord L2800FD-US\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l1800fd-us-power-amplifier-for-live-performance-applications\"\u003eDynacord L1800FD-US\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x1800W power (4 Ω)\u003c\/strong\u003e — High-output dual-channel amplification for full-range and subwoofer loads in live rigs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 2-ohm stability\u003c\/strong\u003e — Holds rated performance into low-impedance loads common in touring and rental systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive speaker processing\u003c\/strong\u003e — Delivers manufacturer-grade FIR filtering and presets for accurate, repeatable loudspeaker tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass H output stage\u003c\/strong\u003e — Combines high efficiency with the headroom and reliability needed for long show days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE system control\u003c\/strong\u003e — Fast setup, flexible control, and full supervision of multiple amplifiers from one software interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard DSP\u003c\/strong\u003e — Output and array delay, 10-band user PEQ, and 5-band array EQ per channel for detailed system alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-panel LC display\u003c\/strong\u003e — Local control and status monitoring at the rack without a connected computer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAuditoriums and performing arts venues\u003c\/li\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eAll-hands rooms\u003c\/li\u003e\n\u003cli\u003eBroadcast studios\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMaximum Output Power\u003c\/th\u003e\n\u003cth\u003e2 Ω\u003c\/th\u003e\n\u003cth\u003e2.7 Ω\u003c\/th\u003e\n\u003cth\u003e4 Ω\u003c\/th\u003e\n\u003cth\u003e8 Ω\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Channel\u003c\/td\u003e\n\u003ctd\u003e3200 W\u003c\/td\u003e\n\u003ctd\u003e2700 W\u003c\/td\u003e\n\u003ctd\u003e1800 W\u003c\/td\u003e\n\u003ctd\u003e950 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual Channel\u003c\/td\u003e\n\u003ctd\u003e3000 W\u003c\/td\u003e\n\u003ctd\u003e2500 W\u003c\/td\u003e\n\u003ctd\u003e1700 W\u003c\/td\u003e\n\u003ctd\u003e900 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridged\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e6000 W\u003c\/td\u003e\n\u003ctd\u003e3400 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;margin-top:12px;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum RMS Voltage Swing (THD 1%, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e90.6 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD at 1200 W \/ 4 Ω\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (ref. 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e10 Hz to 21 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-Noise Ratio (A-weighted, ref. max @ 8 Ω)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 109 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+21 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance (active balanced)\u003c\/td\u003e\n\u003ctd\u003e20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Processing\u003c\/td\u003e\n\u003ctd\u003eFIR filters, audio limiters, output and array delay, 10-band user PEQ, 5-band array EQ per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Control\u003c\/td\u003e\n\u003ctd\u003eSONICUE sound system software (firmware 2.x or higher)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V \/ 120 V \/ 230 V \/ 240 V; 50–60 Hz (factory configured)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption (1\/8 max @ 4 Ω)\u003c\/td\u003e\n\u003ctd\u003e850 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, 3-stage fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5°C to +40°C (40°F to +105°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88 x 462.4 mm (2RU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e18.2 kg (40.1 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Class\u003c\/td\u003e\n\u003ctd\u003eClass I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord L3600FD datasheet. Data subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the L3600FD-US stable into 2-ohm loads?\u003c\/strong\u003e\u003cbr\u003eYes. The L Series offers true 2-ohm stability, so the L3600FD-US holds performance into the low-impedance loudspeaker loads common in live and touring systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat DSP and processing are built in?\u003c\/strong\u003e\u003cbr\u003eIt includes FIR Drive speaker processing with FIR filters, audio limiters, output and array delay, 10-band user parametric EQ, and 5-band array EQ per channel, all managed in SONICUE software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it controlled in a larger system?\u003c\/strong\u003e\u003cbr\u003eSONICUE sound system software (firmware 2.x or higher) provides fast setup, flexible control, and full supervision across multiple amplifiers; a front-panel LC display allows local control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space does it need?\u003c\/strong\u003e\u003cbr\u003eThe L3600FD-US is a 2RU chassis (483 x 88 x 462.4 mm) weighing 18.2 kg (40.1 lb) and mounts in a standard 19-inch rack for touring or fixed use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the L Series and C Series?\u003c\/strong\u003e\u003cbr\u003eL Series amplifiers like this one are optimized for live and mobile applications, while the C Series is built for 24\/7 fixed installation. Compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-l2800fd-us-power-amplifier-for-live-performance-applications\"\u003eL2800FD-US\u003c\/a\u003e for a lower-power live option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eUnits are covered by the Dynacord manufacturer warranty. Contact the Creation Networks team for warranty terms, system design help, and production support.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":44276837253356,"sku":"L3600FD-US","price":2124.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-l3600fd-us-power-amplifier-for-live-performance-applications-creation-networks-57954.png?v=1757930408"},{"product_id":"dynacord-v6004us-power-amplifier","title":"Dynacord V600:4-US – 4-Channel 600W Install Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Dynacord V600:4-US is a 4-channel, 600W power amplifier for commercial installations running background music and clear voice announcements. Its powerTANK design shares 600 W flexibly across all four channels, while Variable Load Drive (VLD) delivers the same power into 4 Ω, 8 Ω, 70 V, or 100 V loads. In a compact 1RU chassis, this multi-channel install amplifier suits multi-zone commercial audio in houses of worship, conference centers, and government spaces.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-v6004-us-power-amplifier-creation-networks-52605.png?v=1757930409\" alt=\"Dynacord V600:4-US 4-channel 600W commercial install power amplifier\" style=\"max-width:100%;height:auto;\" loading=\"lazy\"\u003e\n\u003cp\u003eThe Dynacord V600:4 is a 600 W power amplifier with powerTANK technology that flexibly delivers the total power across its four channels, with no per-channel configuration required. Variable Load Drive (VLD) lets each channel run in 4 Ω, 8 Ω, 70 V, or 100 V without compromising available output, so a single 70V\/100V power amplifier can serve mixed loudspeaker zones. The amp-LINK single-cable approach is compatible with AES72-1E (RJ45) wiring, simplifying installation across all four channels. dualCOOL thermal design runs the amplifier as a convection-cooled device under normal conditions and engages an intelligent multi-speed fan only in extreme thermal situations. ecoRAIL keeps power consumption near standby levels while still producing background-music output, and Auto Power Down (APD) drops consumption below one watt when no signal is present. A PFC switching power supply and a comprehensive protection package support reliable, continuous operation. Onboard processing includes input routing, selectable high-pass and low-pass filters, and a peak limiter. The Class D output stage and 1RU form factor make the V600:4-US an efficient choice for distributed commercial audio. For DSP-based fixed-install amplifiers, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1300fdi-dsp-power-amplifier\"\u003eDynacord C1300FDi\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1800fdi-dsp-power-amplifier\"\u003eDynacord C1800FDi\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-channel, 600 W powerTANK\u003c\/strong\u003e — Shares total power flexibly across channels so each zone draws what it needs without manual setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Load Drive (VLD)\u003c\/strong\u003e — Delivers the same power into 4 Ω, 8 Ω, 70 V, or 100 V on any channel for mixed loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eamp-LINK single-cable wiring\u003c\/strong\u003e — AES72-1E (RJ45) input simplifies installation of all four channels without wiring each connection individually.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003edualCOOL cooling\u003c\/strong\u003e — Runs convection-cooled in normal use, engaging an intelligent fan only under extreme thermal conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eecoRAIL and APD efficiency\u003c\/strong\u003e — Cuts idle draw to under 20 W and standby to under 1 W for low operating cost.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D output stage\u003c\/strong\u003e — High-efficiency amplification in a compact 1RU chassis weighing just 3.6 kg (7.9 lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard processing\u003c\/strong\u003e — Input routing, selectable HPF\/LPF filters, and a peak limiter for tuned, protected output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eConference rooms and conference centers\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eGovernment and civic spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOutput Power\u003c\/th\u003e\n\u003cth\u003e4 Ω\u003c\/th\u003e\n\u003cth\u003e8 Ω\u003c\/th\u003e\n\u003cth\u003e70 V\u003c\/th\u003e\n\u003cth\u003e100 V\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Output Power\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e4 x 150 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output per Channel (power sharing, at min. impedance)\u003c\/td\u003e\n\u003ctd\u003e500 W\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003ctd\u003e500 W\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Rated Output Power\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003e600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;margin-top:12px;\"\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N (1\/8 rated output, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-Noise Ratio (A-weighted, ref. rated output)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 98 dB (4 Ω) to \u0026gt; 103 dB (100 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+18 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance (active balanced)\u003c\/td\u003e\n\u003ctd\u003e20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Input\u003c\/td\u003e\n\u003ctd\u003e2 x 6-pin Euroblock (3.81 mm) + 1 x RJ45 (AES72-1E)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoudspeaker Output\u003c\/td\u003e\n\u003ctd\u003e2 x 4-pin Euroblock (5.08 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Port\u003c\/td\u003e\n\u003ctd\u003e1 x 5-pin Euroblock (3.81 mm); Remote On\/Standby, Ready\/Fault relay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Processing\u003c\/td\u003e\n\u003ctd\u003eInput routing, HPF 24 dB\/oct (100\/150 Hz), LPF 24 dB\/oct (150 Hz), Flat, peak limiter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50–60 Hz; PFC switching supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e115 W (1\/8 rated); idle \u0026lt; 20 W (ecoRAIL); standby \u0026lt; 1 W (APD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003edualCOOL: convection cooling with intelligent fan (side-to-rear) under extreme conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e-5°C to +45°C (+23°F to +113°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAltitude (operating)\u003c\/td\u003e\n\u003ctd\u003e-500 m to +5000 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D, with brackets)\u003c\/td\u003e\n\u003ctd\u003e44.2 x 483 x 269.5 mm (1RU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.6 kg (7.9 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Class\u003c\/td\u003e\n\u003ctd\u003eClass I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord V600:4 datasheet. Data subject to change without notice.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan the V600:4-US drive 70 V and 100 V loudspeaker lines?\u003c\/strong\u003e\u003cbr\u003eYes. Variable Load Drive (VLD) lets each channel run in 4 Ω, 8 Ω, 70 V, or 100 V with the same available power, so it can serve mixed low-impedance and constant-voltage zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does powerTANK distribute the 600 W?\u003c\/strong\u003e\u003cbr\u003epowerTANK is a shared reservoir of amplification power deployed flexibly across the four channels. It adapts to each zone automatically, with no per-channel power configuration required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it wired in an installation?\u003c\/strong\u003e\u003cbr\u003eThe amp-LINK feature supports AES72-1E (RJ45) single-cable wiring for all four channels, and audio can be daisy-chained to other compatible devices. Inputs and outputs use Euroblock connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it energy efficient for always-on systems?\u003c\/strong\u003e\u003cbr\u003eYes. ecoRAIL keeps idle consumption under 20 W while still producing background-music output, and Auto Power Down (APD) reduces standby consumption to under 1 W.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space and what cooling does it use?\u003c\/strong\u003e\u003cbr\u003eIt is a compact 1RU chassis (44.2 x 483 x 269.5 mm, 3.6 kg) with dualCOOL convection cooling that engages a fan only under extreme thermal conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and support apply?\u003c\/strong\u003e\u003cbr\u003eUnits are covered by the Dynacord manufacturer warranty. Contact the Creation Networks team for warranty terms, system design assistance, and project support.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":44276839645420,"sku":"V6004-US","price":1295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dynacord-v6004-us-power-amplifier-creation-networks-52605.png?v=1757930409"},{"product_id":"dynacord-v600-2-us-2-channel-600w-install-power-amplifier","title":"Dynacord V600:2-US – 2-Channel 600W Install Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord V600:2-US is a 2-channel, 600 W commercial install power amplifier built for background music and clear voice announcements in distributed audio systems. Designed as a compact half-rack 1U amplifier, it suits integrators deploying paging and BGM across retail, hospitality, and education spaces. Its powerTANK technology and Variable Load Drive deliver flexible power into 4 ohm, 8 ohm, 70 V, or 100 V loads on any channel, making it an efficient 70V\/100V commercial amplifier for mixed loudspeaker systems. It pairs power sharing with low standby consumption for cost-effective commercial deployment.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe V600:2 provides 600 W of total powerTANK capacity distributed flexibly across its two channels, eliminating the need to manually allocate power per zone. Variable Load Drive lets each channel run 4 ohm, 8 ohm, 70 V, or 100 V simultaneously, simplifying high-Z and low-Z distributed audio design without external transformers. ecoRAIL keeps idle power consumption near standby levels while still producing background music output, and Auto Power Down reduces consumption to less than a watt when no signal is present. The dualCOOL thermal design operates convection-cooled in most conditions, engaging an intelligent multi-speed fan only under extreme thermal load for quiet operation in occupied rooms. A single-cable AES72-1E (RJ45) line input simplifies installation by carrying both channels without wiring each connection individually, alongside a 6-pin Euroblock analog input. Onboard signal processing includes input routing, selectable high-pass and low-pass filters, and a peak limiter. A comprehensive protection package and PFC power supply support reliable operation in commercial environments. The V600:2 is part of the broader \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e; for higher channel counts, the comparable 4-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-v6004us-power-amplifier\"\u003eDynacord V600:4\u003c\/a\u003e extends the same platform.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003epowerTANK Technology\u003c\/strong\u003e — A 600 W reservoir of amplification power deploys flexibly across both channels with no manual per-channel power configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Load Drive (VLD)\u003c\/strong\u003e — Delivers consistent power into 4 ohm, 8 ohm, 70 V, or 100 V on any channel simultaneously for mixed loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eecoRAIL and Auto Power Down\u003c\/strong\u003e — Maintains background music output at near-standby consumption and drops to less than a watt when no signal is present.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003edualCOOL Thermal Design\u003c\/strong\u003e — Operates convection-cooled in typical use and engages an intelligent multi-speed fan only under extreme thermal conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAES72-1E Single-Cable Line Input\u003c\/strong\u003e — RJ45 wiring carries both channels for simplified installation without individually wiring each connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Onboard Filtering\u003c\/strong\u003e — Input routing with 24 dB\/Oct high-pass and low-pass filters and a peak limiter tailors output per application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Protection Package\u003c\/strong\u003e — High frequency, DC, short circuit, over temperature, over voltage, and current limiters support reliable operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Half-Rack 1U Chassis\u003c\/strong\u003e — At 1.74 x 8.6 x 10.6 in and 4.6 lb, two units mount side by side in a single rack space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms and huddle rooms\u003c\/li\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eTraining rooms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Rated Output Power\u003c\/td\u003e\n\u003ctd\u003e600 W (powerTANK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Output Power\u003c\/td\u003e\n\u003ctd\u003e2 x 300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Power per Channel (power sharing) — 4 Ω \/ 8 Ω \/ 70 V \/ 100 V\u003c\/td\u003e\n\u003ctd\u003e500 W \/ 600 W \/ 500 W \/ 600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Impedance per Channel (4 Ω \/ 8 Ω \/ 70 V \/ 100 V)\u003c\/td\u003e\n\u003ctd\u003e4 Ω \/ 8 Ω \/ 16.7 Ω \/ 33.3 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Impedance per Channel (4 Ω \/ 8 Ω \/ 70 V \/ 100 V)\u003c\/td\u003e\n\u003ctd\u003e2.6 Ω \/ 4 Ω \/ 10 Ω \/ 16.7 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Gain (+6 dBu input sensitivity, LEVEL 0 dB)\u003c\/td\u003e\n\u003ctd\u003e27.0 \/ 30.0 \/ 33.2 \/ 36.2 dB (4 Ω \/ 8 Ω \/ 70 V \/ 100 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N (1\/8 rated output power, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (analog in to speaker out, -3 dB)\u003c\/td\u003e\n\u003ctd\u003eHP: 30\/100\/150 Hz to 20 kHz; LP: 30 Hz to 150 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Factor (ref. rated impedance)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 75 (4 Ω), \u0026gt; 150 (8 Ω), \u0026gt; 250 (70 V), \u0026gt; 500 (100 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal to Noise Ratio (A-weighted, LEVEL 0 dB)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 100 dB (4 Ω) to \u0026gt; 103 dB (100 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Input\u003c\/td\u003e\n\u003ctd\u003e6-pin Euroblock 3.81 mm, parallel 1 x RJ45 (AES72-1E)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Level (LEVEL 0 dB)\u003c\/td\u003e\n\u003ctd\u003e+18 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance, active balanced\u003c\/td\u003e\n\u003ctd\u003e20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoudspeaker Output\u003c\/td\u003e\n\u003ctd\u003e4-pin Euroblock, 5.08 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains Input\u003c\/td\u003e\n\u003ctd\u003eIEC C14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Port\u003c\/td\u003e\n\u003ctd\u003e1 x 5-pin Euroblock 3.81 mm (REMOTE ON, READY\/FAULT relay)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Processing\u003c\/td\u003e\n\u003ctd\u003eInput routing, HPF 24 dB\/Oct 100\/150 Hz, LPF 24 dB\/Oct 150 Hz, Flat, Peak limiter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50-60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConsumption at 1\/8 Rated Output Power\u003c\/td\u003e\n\u003ctd\u003e115 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIdle Mode (ecoRAIL, no input signal)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 12 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby Mode (APD active)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 1 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eConvection cooling; forced cooling (side to rear) under extreme thermal conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e-5 °C to +45 °C (+23 °F to +113 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e44.2 x 218 x 269.5 mm (1.74 x 8.6 x 10.6 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.1 kg (4.6 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord V600:2 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan the V600:2 drive 70V and 100V distributed loudspeaker lines?\u003c\/strong\u003e\u003cbr\u003eYes. Variable Load Drive delivers the same power into 4 ohm, 8 ohm, 70 V, or 100 V on any channel simultaneously, supporting both high-Z and low-Z loudspeaker systems without external transformers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does powerTANK distribute power between the two channels?\u003c\/strong\u003e\u003cbr\u003epowerTANK is a 600 W reservoir of amplification power shared flexibly across both channels based on the demand of each zone, with no manual per-channel power setup required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat input connections does it use for AV system integration?\u003c\/strong\u003e\u003cbr\u003eThe V600:2 accepts a 6-pin Euroblock analog input and a parallel RJ45 AES72-1E line input, allowing single-cable installation that carries both channels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the V600:2 quiet enough for occupied rooms?\u003c\/strong\u003e\u003cbr\u003eYes. The dualCOOL design runs convection-cooled in typical conditions and only engages its intelligent multi-speed fan under extreme thermal load, keeping operation quiet in meeting spaces and houses of worship.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it reduce power consumption during quiet periods?\u003c\/strong\u003e\u003cbr\u003eecoRAIL keeps idle consumption below 12 W while still producing background music output, and Auto Power Down lowers standby consumption to less than 1 W when no signal is present.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe V600:2 is a half-rack 1U chassis measuring 1.74 x 8.6 x 10.6 in and weighing 4.6 lb, so two units fit side by side in a single rack space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a 4-channel version available?\u003c\/strong\u003e\u003cbr\u003eYes. For installations needing more channels, the comparable 4-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-v6004us-power-amplifier\"\u003eDynacord V600:4\u003c\/a\u003e extends the same V600 platform. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e to compare models.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741652664556,"sku":"V600:2-US","price":949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DYN-V600-2-US_74a42296-f583-4062-ac03-4ce86a6b92ff.jpg?v=1781711872"},{"product_id":"dynacord-u30-1m-us-30w-single-channel-mixer-amplifier","title":"Dynacord U30:1M-US – 30W Single-Channel Mixer Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord U30:1M is a 30 W mixer amplifier built for small commercial spaces that need background music and clear paging from a single compact unit. As a 70V mixer amplifier, it drives 70 V and 100 V distributed audio lines as well as 4 ohm and 8 ohm low-Z loudspeakers, making it a flexible commercial background music amplifier for cafes, retail floors, and meeting spaces. The integrated four-input mixer, EMG override, and half-rack chassis let integrators deploy a complete paging-and-music head end without a separate mixer.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe U30:1M combines a four-input mixer and a Class-D power amplifier in one half-rack 1U enclosure, so a small system can run music sources and microphone announcements from a single device. Two mic\/line inputs with switchable 48 V phantom power accept microphones or line sources, while two stereo aux inputs (summed to mono) handle background music players. The EMG priority input accepts both line-level and 100 V signals with selectable level, ensuring emergency and all-call messages override program audio. A call-station interface on MIC1 supports contact-closure triggering with a configurable two-tone chime, and VOX ducking on MIC2 automatically lowers music under live speech for intelligible announcements. The amplifier outputs to 4 ohm, 8 ohm, 70 V, and 100 V loads, selectable by DIP switch, so the same unit fits high-Z distributed ceiling systems or low-Z surface speakers. This Dynacord U Series amplifier suits 24\/7 commercial deployment, with remote power standby for energy efficiency and front-panel gain, bass, and treble controls for quick setup. It is part of the Dynacord lineup at Creation Networks; for larger DSP-equipped install systems, compare the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1300fdi-dsp-power-amplifier\"\u003eDynacord C1300FDi DSP power amplifier\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Input Mixer Amplifier\u003c\/strong\u003e — Two mic\/line and two aux inputs let one unit blend microphones and background music without an external mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 V \/ 100 V and Low-Z Output\u003c\/strong\u003e — Selectable 4 ohm, 8 ohm, 70 V, and 100 V operation covers both distributed high-Z and direct low-Z loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Priority Override\u003c\/strong\u003e — A dedicated emergency input accepts line-level or 100 V signals with level selection so critical messages take precedence over program audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCall-Station Interface with Two-Tone Chime\u003c\/strong\u003e — MIC1 supports contact-closure paging with a configurable attention chime for clear all-call announcements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOX Ducking\u003c\/strong\u003e — Automatic ducking lowers background music under live speech for intelligible voice announcements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Topology\u003c\/strong\u003e — Class-D amplification improves energy efficiency and reduces heat compared with traditional linear and Class-AB designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 48 V Phantom Power\u003c\/strong\u003e — Both mic inputs supply phantom power for condenser microphones and powered call stations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Chassis\u003c\/strong\u003e — Included brackets allow single, side-by-side rack, table-top, or under-counter mounting, with two units fitting one rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 120 Hz High-Pass Filter\u003c\/strong\u003e — A selectable HPF removes unwanted low-frequency content to protect small speakers and improve speech clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power Standby\u003c\/strong\u003e — Contact-closure remote power off reduces standby consumption to 0.6 W for energy-conscious installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms\u003c\/li\u003e\n\u003cli\u003eHuddle rooms\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eTraining rooms\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated output power (IHF-A-202)\u003c\/td\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput modes\u003c\/td\u003e\n\u003ctd\u003e4 ohm, 8 ohm, 70 V, 100 V (DIP selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput stage topology\u003c\/td\u003e\n\u003ctd\u003eClass D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax output voltage (1 kHz, THD 0.5%, no load)\u003c\/td\u003e\n\u003ctd\u003e12 VRMS (4 ohm) \/ 16 VRMS (8 ohm) \/ 87 VRMS (70 V) \/ 118 VRMS (100 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e2 mic\/line, 2 aux, EMG priority input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhantom power\u003c\/td\u003e\n\u003ctd\u003e48 V DC, switchable (both mic inputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response (any input to output, -3 dB)\u003c\/td\u003e\n\u003ctd\u003e70 Hz - 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistortion\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.5% at rated output power, 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-noise ratio (A-weighted)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;100 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEqualization\u003c\/td\u003e\n\u003ctd\u003eBass +\/-12 dB \/ 100 Hz; Treble +\/-12 dB \/ 10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-pass filter\u003c\/td\u003e\n\u003ctd\u003eSwitchable 120 Hz, 12 dB\/oct (permanent 70 Hz lo-cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoudspeaker connector\u003c\/td\u003e\n\u003ctd\u003e4-pin Eurostyle (2-pin LoZ, 2-pin HiZ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains power supply\u003c\/td\u003e\n\u003ctd\u003e100 - 240 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby power consumption\u003c\/td\u003e\n\u003ctd\u003e0.6 W (remote off active)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFanless (convection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e44.2 x 218 x 217.7 mm (1.74 x 8.6 x 8.57 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e2.2 kg (4.85 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 C to 45 C (23 F to 113 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIEC protection class\u003c\/td\u003e\n\u003ctd\u003eClass I (grounded)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord U30:1M datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the U30:1M support both 70 V and 100 V distributed speaker systems?\u003c\/strong\u003e\u003cbr\u003eYes. The output stage is DIP-switch selectable for 4 ohm, 8 ohm, 70 V, and 100 V operation, so it works with high-Z distributed ceiling and pendant systems as well as low-Z surface speakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it page over background music automatically?\u003c\/strong\u003e\u003cbr\u003eYes. VOX ducking on the MIC2 input automatically lowers music when speech is detected, and the EMG priority input overrides all program audio for emergency or all-call messages.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it integrate with a call station?\u003c\/strong\u003e\u003cbr\u003eThe MIC1 input includes a call-station interface on a 5-pin Eurostyle connector with contact-closure triggering and a configurable two-tone chime. It is compatible with the Dynacord PLE-1CS all-call station.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the amplifier mounted in an equipment rack?\u003c\/strong\u003e\u003cbr\u003eThe half-rack 1U chassis ships with brackets for single rack-mount, side-by-side mounting (two units per rack space), table-top, or under-counter installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require microphone phantom power?\u003c\/strong\u003e\u003cbr\u003eBoth mic\/line inputs provide switchable 48 V phantom power for condenser microphones and powered call stations; it can be turned off for dynamic mics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e\u003cbr\u003eDynacord products carry the manufacturer's standard warranty. Creation Networks provides pre-sale system design guidance and post-sale support for commercial AV deployments. Contact our team through the Creation Networks site for documentation and assistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this model suitable for 24\/7 operation?\u003c\/strong\u003e\u003cbr\u003eYes. The fanless Class-D design, protection circuitry, and remote standby make it appropriate for continuous fixed-install commercial use in small spaces.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741652697324,"sku":"U30:1M-US","price":319.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/ff17248ba6ReFb2b4YfCBpDTSmdMJS3AkPPU5ogv.jpg?v=1781711459"},{"product_id":"dynacord-u60-1m-us-60w-single-channel-mixer-amplifier","title":"Dynacord U60:1M-US – 60W Single-Channel Mixer Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord U60:1M is a 60 W mixer amplifier for small commercial audio systems that need background music and clear voice paging from one compact device. As a 70V mixer amplifier supporting 70 V, 100 V, 4 ohm, and 8 ohm loads, it serves as a versatile commercial background music amplifier for retail, hospitality, and meeting spaces. Its four-input mixer, EMG priority override, and half-rack chassis let integrators build a complete paging-and-music head end without a separate mixing console.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe U60:1M integrates a four-input mixer and a 60 W Class-D power amplifier in a half-rack 1U enclosure, giving small distributed audio systems a single point of source mixing and amplification. Two mic\/line inputs with switchable 48 V phantom power handle microphones or line sources, and two stereo aux inputs (summed to mono) accept background music players. The EMG priority input takes line-level or 100 V signals with selectable level so all-call and emergency messages override program audio. MIC1 provides a call-station interface with contact-closure triggering and a configurable two-tone chime, while VOX ducking on MIC2 automatically attenuates music under live speech for intelligible announcements. DIP-selectable output for 4 ohm, 8 ohm, 70 V, and 100 V lets the same amplifier serve high-Z distributed ceiling systems or low-Z surface speakers. Built for continuous commercial deployment, this Dynacord U Series amplifier offers remote power standby for energy efficiency and front-panel gain, bass, and treble adjustment for fast commissioning. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e at Creation Networks, or for larger DSP-equipped install amplifiers see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1300fdi-dsp-power-amplifier\"\u003eDynacord C1300FDi DSP power amplifier\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Input Mixer Amplifier\u003c\/strong\u003e — Two mic\/line and two aux inputs combine microphones and music sources in one unit, removing the need for an external mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 V \/ 100 V and Low-Z Output\u003c\/strong\u003e — Selectable 4 ohm, 8 ohm, 70 V, and 100 V operation supports both distributed high-Z and direct low-Z loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Priority Override\u003c\/strong\u003e — A dedicated emergency input accepts line-level or 100 V signals with level selection so critical messages take precedence over program audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCall-Station Interface with Two-Tone Chime\u003c\/strong\u003e — MIC1 supports contact-closure paging with a configurable attention chime for clear all-call announcements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOX Ducking\u003c\/strong\u003e — Automatic ducking lowers background music under live speech for intelligible voice communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Topology\u003c\/strong\u003e — Class-D amplification improves energy efficiency and reduces heat versus traditional linear and Class-AB designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 48 V Phantom Power\u003c\/strong\u003e — Both mic inputs supply phantom power for condenser microphones and powered call stations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Chassis\u003c\/strong\u003e — Included brackets allow single, side-by-side rack, table-top, or under-counter mounting, with two units fitting one rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 120 Hz High-Pass Filter\u003c\/strong\u003e — A selectable HPF removes unwanted low-frequency content to protect small speakers and improve speech clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power Standby\u003c\/strong\u003e — Contact-closure remote power off reduces standby consumption to 0.6 W for energy-conscious installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms\u003c\/li\u003e\n\u003cli\u003eHuddle rooms\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eTraining rooms\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated output power (IHF-A-202)\u003c\/td\u003e\n\u003ctd\u003e60 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput modes\u003c\/td\u003e\n\u003ctd\u003e4 ohm, 8 ohm, 70 V, 100 V (DIP selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput stage topology\u003c\/td\u003e\n\u003ctd\u003eClass D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax output voltage (1 kHz, THD 0.5%, no load)\u003c\/td\u003e\n\u003ctd\u003e16 VRMS (4 ohm) \/ 22 VRMS (8 ohm) \/ 86 VRMS (70 V) \/ 117 VRMS (100 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e2 mic\/line, 2 aux, EMG priority input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhantom power\u003c\/td\u003e\n\u003ctd\u003e48 V DC, switchable (both mic inputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response (any input to output, -3 dB)\u003c\/td\u003e\n\u003ctd\u003e70 Hz - 18 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistortion\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.5% at rated output power, 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-noise ratio (A-weighted)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;100 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEqualization\u003c\/td\u003e\n\u003ctd\u003eBass +\/-12 dB \/ 100 Hz; Treble +\/-12 dB \/ 10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-pass filter\u003c\/td\u003e\n\u003ctd\u003eSwitchable 120 Hz, 12 dB\/oct (permanent 70 Hz lo-cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoudspeaker connector\u003c\/td\u003e\n\u003ctd\u003e4-pin Eurostyle (2-pin LoZ, 2-pin HiZ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains power supply\u003c\/td\u003e\n\u003ctd\u003e100 - 240 VAC +\/-10%, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby power consumption\u003c\/td\u003e\n\u003ctd\u003e0.6 W (remote off active)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFanless (convection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e44.2 x 218 x 217.7 mm (1.74 x 8.6 x 8.57 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e2.5 kg (5.51 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 C to 45 C (23 F to 113 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIEC protection class\u003c\/td\u003e\n\u003ctd\u003eClass I (grounded)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord U60:1M datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the U60:1M support both 70 V and 100 V distributed speaker systems?\u003c\/strong\u003e\u003cbr\u003eYes. The output is DIP-switch selectable for 4 ohm, 8 ohm, 70 V, and 100 V, so it works with high-Z distributed ceiling and pendant systems as well as low-Z surface speakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it page over background music automatically?\u003c\/strong\u003e\u003cbr\u003eYes. VOX ducking on the MIC2 input lowers music when speech is detected, and the EMG priority input overrides all program audio for emergency or all-call messages.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it integrate with a call station?\u003c\/strong\u003e\u003cbr\u003eThe MIC1 input provides a call-station interface on a 5-pin Eurostyle connector with contact-closure triggering and a configurable two-tone chime. It is compatible with the Dynacord PLE-1CS all-call station.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the amplifier mounted in an equipment rack?\u003c\/strong\u003e\u003cbr\u003eThe half-rack 1U chassis ships with brackets for single rack-mount, side-by-side mounting (two units per rack space), table-top, or under-counter installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require microphone phantom power?\u003c\/strong\u003e\u003cbr\u003eBoth mic\/line inputs provide switchable 48 V phantom power for condenser microphones and powered call stations; it can be disabled for dynamic mics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e\u003cbr\u003eDynacord products carry the manufacturer's standard warranty. Creation Networks provides pre-sale system design guidance and post-sale support for commercial AV deployments. Contact our team through the Creation Networks site for documentation and assistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this model suitable for 24\/7 operation?\u003c\/strong\u003e\u003cbr\u003eYes. The fanless Class-D design, protection circuitry, and remote standby make it appropriate for continuous fixed-install commercial use in small spaces.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741652730092,"sku":"U60:1M-US","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DYN-U60-1M-US_733f173e-44cd-45c4-b964-8e33d8f24726.jpg?v=1781711955"},{"product_id":"dynacord-u120-1m-us-120w-single-channel-mixer-amplifier","title":"Dynacord U120:1M-US – 120W Single-Channel Mixer Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord U120:1M is a 120 W mixer amplifier for small to medium commercial audio systems that combine background music with clear voice paging. As a 70V mixer amplifier supporting 70 V, 100 V, 4 ohm, and 8 ohm loads, it is a capable commercial background music amplifier for retail chains, hospitality, houses of worship, and meeting spaces. Its four-input mixer, EMG priority override, and half-rack chassis let integrators deploy a complete paging-and-music head end without a separate mixing console.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe U120:1M pairs a four-input mixer with a 120 W Class-D power amplifier in a half-rack 1U enclosure, providing source mixing and amplification for distributed audio systems from a single device. Two mic\/line inputs with switchable 48 V phantom power accept microphones or line sources, and two stereo aux inputs (summed to mono) handle background music players. The EMG priority input takes line-level or 100 V signals with selectable level so all-call and emergency messages override program audio. MIC1 offers a call-station interface with contact-closure triggering and a configurable two-tone chime, while VOX ducking on MIC2 automatically lowers music under live speech for intelligible announcements. DIP-selectable output for 4 ohm, 8 ohm, 70 V, and 100 V lets the same amplifier serve high-Z distributed ceiling systems or low-Z surface speakers, and a four-stage temperature-controlled fan keeps the unit quiet at low output and cool under load. Built for continuous commercial deployment, this Dynacord U Series amplifier offers remote power standby and front-panel gain, bass, and treble adjustment for fast commissioning. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e at Creation Networks, or for larger DSP-equipped install amplifiers see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1300fdi-dsp-power-amplifier\"\u003eDynacord C1300FDi DSP power amplifier\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Input Mixer Amplifier\u003c\/strong\u003e — Two mic\/line and two aux inputs combine microphones and music sources in one unit, removing the need for an external mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 V \/ 100 V and Low-Z Output\u003c\/strong\u003e — Selectable 4 ohm, 8 ohm, 70 V, and 100 V operation supports both distributed high-Z and direct low-Z loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Priority Override\u003c\/strong\u003e — A dedicated emergency input accepts line-level or 100 V signals with level selection so critical messages take precedence over program audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCall-Station Interface with Two-Tone Chime\u003c\/strong\u003e — MIC1 supports contact-closure paging with a configurable attention chime for clear all-call announcements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOX Ducking\u003c\/strong\u003e — Automatic ducking lowers background music under live speech for intelligible voice communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Topology\u003c\/strong\u003e — Class-D amplification improves energy efficiency and reduces heat versus traditional linear and Class-AB designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Stage Cooling\u003c\/strong\u003e — A temperature-controlled four-stage fan keeps the amplifier quiet at low levels and stable under sustained load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 48 V Phantom Power\u003c\/strong\u003e — Both mic inputs supply phantom power for condenser microphones and powered call stations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Chassis\u003c\/strong\u003e — Included brackets allow single, side-by-side rack, table-top, or under-counter mounting, with two units fitting one rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 120 Hz High-Pass Filter\u003c\/strong\u003e — A selectable HPF removes unwanted low-frequency content to protect speakers and improve speech clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power Standby\u003c\/strong\u003e — Contact-closure remote power off reduces standby consumption to 1.25 W for energy-conscious installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eTraining rooms\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated output power (IHF-A-202)\u003c\/td\u003e\n\u003ctd\u003e120 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput modes\u003c\/td\u003e\n\u003ctd\u003e4 ohm, 8 ohm, 70 V, 100 V (DIP selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput stage topology\u003c\/td\u003e\n\u003ctd\u003eClass D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax output voltage (1 kHz, THD 0.5%, no load)\u003c\/td\u003e\n\u003ctd\u003e22 VRMS (4 ohm) \/ 32 VRMS (8 ohm) \/ 71 VRMS (70 V) \/ 102 VRMS (100 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e2 mic\/line, 2 aux, EMG priority input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhantom power\u003c\/td\u003e\n\u003ctd\u003e48 V DC, switchable (both mic inputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response (any input to output, -3 dB)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;20 Hz - 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistortion\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.5% at rated output power, 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-noise ratio (A-weighted)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;100 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEqualization\u003c\/td\u003e\n\u003ctd\u003eBass +\/-12 dB \/ 100 Hz; Treble +\/-12 dB \/ 10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-pass filter\u003c\/td\u003e\n\u003ctd\u003eSwitchable 120 Hz, 12 dB\/oct (permanent 20 Hz lo-cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoudspeaker connector\u003c\/td\u003e\n\u003ctd\u003e4-pin Eurostyle (2-pin LoZ, 2-pin HiZ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains power supply\u003c\/td\u003e\n\u003ctd\u003e100 - 240 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby power consumption\u003c\/td\u003e\n\u003ctd\u003e1.25 W (remote off active)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFour-stage fan (Off \/ Slow \/ Medium \/ Fast)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e44.2 x 218 x 217.7 mm (1.74 x 8.6 x 8.57 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e1.9 kg (4.18 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 C to 45 C (23 F to 113 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIEC protection class\u003c\/td\u003e\n\u003ctd\u003eClass I (grounded)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord U120:1M datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the U120:1M support both 70 V and 100 V distributed speaker systems?\u003c\/strong\u003e\u003cbr\u003eYes. The output is DIP-switch selectable for 4 ohm, 8 ohm, 70 V, and 100 V, so it works with high-Z distributed ceiling and pendant systems as well as low-Z surface speakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it page over background music automatically?\u003c\/strong\u003e\u003cbr\u003eYes. VOX ducking on the MIC2 input lowers music when speech is detected, and the EMG priority input overrides all program audio for emergency or all-call messages.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it integrate with a call station?\u003c\/strong\u003e\u003cbr\u003eThe MIC1 input provides a call-station interface on a 5-pin Eurostyle connector with contact-closure triggering and a configurable two-tone chime. It is compatible with the Dynacord PLE-1CS all-call station.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the amplifier quiet enough for occupied rooms?\u003c\/strong\u003e\u003cbr\u003eThe four-stage temperature-controlled fan stays off or slow at low output levels, keeping acoustic noise minimal in meeting rooms and worship spaces while still cooling the unit under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the amplifier mounted in an equipment rack?\u003c\/strong\u003e\u003cbr\u003eThe half-rack 1U chassis ships with brackets for single rack-mount, side-by-side mounting (two units per rack space), table-top, or under-counter installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e\u003cbr\u003eDynacord products carry the manufacturer's standard warranty. Creation Networks provides pre-sale system design guidance and post-sale support for commercial AV deployments. Contact our team through the Creation Networks site for documentation and assistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this model suitable for 24\/7 operation?\u003c\/strong\u003e\u003cbr\u003eYes. The Class-D design, four-stage cooling, protection circuitry, and remote standby make it appropriate for continuous fixed-install commercial use.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741652762860,"sku":"U120:1M-US","price":489.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DYN-U120-1M-US_78f00658-73b6-4fb9-9f99-10af400ad4ee.jpg?v=1781711960"},{"product_id":"dynacord-u240-1m-us-240w-single-channel-mixer-amplifier","title":"Dynacord U240:1M-US – 240W Single-Channel Mixer Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord U240:1M is a 240 W mixer amplifier for medium commercial audio systems that combine background music with clear voice paging. As a 70V mixer amplifier supporting 70 V, 100 V, 4 ohm, and 8 ohm loads, it is the highest-output commercial background music amplifier in the U Series mixer line, suited to larger retail floors, houses of worship, and multi-purpose rooms. Its four-input mixer, EMG priority override, and half-rack chassis let integrators deploy a complete paging-and-music head end without a separate mixing console.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe U240:1M combines a four-input mixer with a 240 W Class-D power amplifier in a half-rack 1U enclosure, delivering source mixing and high output for distributed audio systems from a single device. Two mic\/line inputs with switchable 48 V phantom power accept microphones or line sources, and two stereo aux inputs (summed to mono) handle background music players. The EMG priority input takes line-level or 100 V signals with selectable level so all-call and emergency messages override program audio. MIC1 offers a call-station interface with contact-closure triggering and a configurable two-tone chime, while VOX ducking on MIC2 automatically lowers music under live speech for intelligible announcements. DIP-selectable output for 4 ohm, 8 ohm, 70 V, and 100 V lets the same amplifier drive longer high-Z distributed speaker runs or low-Z surface speakers, and a four-stage temperature-controlled fan keeps the unit quiet at low output and cool under sustained load. Built for continuous commercial deployment, this Dynacord U Series amplifier offers remote power standby and front-panel gain, bass, and treble adjustment for fast commissioning. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e at Creation Networks, or for larger DSP-equipped install amplifiers see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1300fdi-dsp-power-amplifier\"\u003eDynacord C1300FDi DSP power amplifier\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Input Mixer Amplifier\u003c\/strong\u003e — Two mic\/line and two aux inputs combine microphones and music sources in one unit, removing the need for an external mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e240 W of Output\u003c\/strong\u003e — The highest-power U Series mixer amplifier drives larger zones and longer 70 V\/100 V speaker runs from a half-rack chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 V \/ 100 V and Low-Z Output\u003c\/strong\u003e — Selectable 4 ohm, 8 ohm, 70 V, and 100 V operation supports both distributed high-Z and direct low-Z loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Priority Override\u003c\/strong\u003e — A dedicated emergency input accepts line-level or 100 V signals with level selection so critical messages take precedence over program audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCall-Station Interface with Two-Tone Chime\u003c\/strong\u003e — MIC1 supports contact-closure paging with a configurable attention chime for clear all-call announcements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOX Ducking\u003c\/strong\u003e — Automatic ducking lowers background music under live speech for intelligible voice communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Topology\u003c\/strong\u003e — Class-D amplification improves energy efficiency and reduces heat versus traditional linear and Class-AB designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Stage Cooling\u003c\/strong\u003e — A temperature-controlled four-stage fan keeps the amplifier quiet at low levels and stable under sustained load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 48 V Phantom Power\u003c\/strong\u003e — Both mic inputs supply phantom power for condenser microphones and powered call stations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Chassis\u003c\/strong\u003e — Included brackets allow single, side-by-side rack, table-top, or under-counter mounting, with two units fitting one rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power Standby\u003c\/strong\u003e — Contact-closure remote power off reduces standby consumption to 1.25 W for energy-conscious installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eAll-hands rooms\u003c\/li\u003e\n\u003cli\u003eTraining rooms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated output power (IHF-A-202)\u003c\/td\u003e\n\u003ctd\u003e240 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput modes\u003c\/td\u003e\n\u003ctd\u003e4 ohm, 8 ohm, 70 V, 100 V (DIP selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput stage topology\u003c\/td\u003e\n\u003ctd\u003eClass D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax output voltage (1 kHz, THD 0.5%, no load)\u003c\/td\u003e\n\u003ctd\u003e31 VRMS (4 ohm) \/ 45 VRMS (8 ohm) \/ 71 VRMS (70 V) \/ 102 VRMS (100 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e2 mic\/line, 2 aux, EMG priority input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhantom power\u003c\/td\u003e\n\u003ctd\u003e48 V DC, switchable (both mic inputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response (any input to output, -3 dB)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;20 Hz - 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistortion\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.5% at rated output power, 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-noise ratio (A-weighted)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;100 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEqualization\u003c\/td\u003e\n\u003ctd\u003eBass +\/-12 dB \/ 100 Hz; Treble +\/-12 dB \/ 10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-pass filter\u003c\/td\u003e\n\u003ctd\u003eSwitchable 120 Hz, 12 dB\/oct (permanent 20 Hz lo-cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoudspeaker connector\u003c\/td\u003e\n\u003ctd\u003e4-pin Eurostyle (2-pin LoZ, 2-pin HiZ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains power supply\u003c\/td\u003e\n\u003ctd\u003e100 - 240 VAC +\/-10%, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby power consumption\u003c\/td\u003e\n\u003ctd\u003e1.25 W (remote off active)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFour-stage fan (Off \/ Slow \/ Medium \/ Fast)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e44.2 x 218 x 217.7 mm (1.74 x 8.6 x 8.57 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e1.9 kg (4.18 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 C to 45 C (23 F to 113 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIEC protection class\u003c\/td\u003e\n\u003ctd\u003eClass I (grounded)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord U240:1M datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the U240:1M support both 70 V and 100 V distributed speaker systems?\u003c\/strong\u003e\u003cbr\u003eYes. The output is DIP-switch selectable for 4 ohm, 8 ohm, 70 V, and 100 V, so it works with high-Z distributed ceiling and pendant systems as well as low-Z surface speakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many speakers can 240 W drive on a 70 V\/100 V line?\u003c\/strong\u003e\u003cbr\u003eTotal connected speaker tap wattage should stay within the 240 W rating with headroom for line losses. Sum the tap settings of all speakers in the zone and confirm the total fits within the amplifier rating during system design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it page over background music automatically?\u003c\/strong\u003e\u003cbr\u003eYes. VOX ducking on the MIC2 input lowers music when speech is detected, and the EMG priority input overrides all program audio for emergency or all-call messages.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it integrate with a call station?\u003c\/strong\u003e\u003cbr\u003eThe MIC1 input provides a call-station interface on a 5-pin Eurostyle connector with contact-closure triggering and a configurable two-tone chime. It is compatible with the Dynacord PLE-1CS all-call station.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the amplifier mounted in an equipment rack?\u003c\/strong\u003e\u003cbr\u003eThe half-rack 1U chassis ships with brackets for single rack-mount, side-by-side mounting (two units per rack space), table-top, or under-counter installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e\u003cbr\u003eDynacord products carry the manufacturer's standard warranty. Creation Networks provides pre-sale system design guidance and post-sale support for commercial AV deployments. Contact our team through the Creation Networks site for documentation and assistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this model suitable for 24\/7 operation?\u003c\/strong\u003e\u003cbr\u003eYes. The Class-D design, four-stage cooling, protection circuitry, and remote standby make it appropriate for continuous fixed-install commercial use.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741652795628,"sku":"U240:1M-US","price":569.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DYN-U240-1M-US_21fb3194-7f35-4fb1-a6f3-10b15dccdf07.jpg?v=1781711964"},{"product_id":"dynacord-u120-1-us-120w-single-channel-power-amplifier","title":"Dynacord U120:1-US – 120W Single-Channel Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord U120:1 is a 120 W single-channel power amplifier for fixed commercial audio systems that already have a source mixer or DSP front end. As a 70V power amplifier supporting 70 V, 100 V, 4 ohm, and 8 ohm loads, it serves as a compact distributed audio amplifier for background music and paging in retail, hospitality, and meeting spaces. With rear-panel controls and a half-rack chassis, it is a set-and-forget install amplifier for spaces where front-panel access should be restricted.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe U120:1 is a power-amplifier-only member of the Dynacord U Series, delivering 120 W of Class-D output without an onboard mixer, making it ideal where a separate mixer, DSP, or matrix supplies the program signal. It accepts one balanced line input on a 3-pin Eurostyle connector and one unbalanced line input on RCA (summed to mono), plus a dedicated EMG priority input that takes line-level or 100 V signals so emergency and all-call messages override program audio. The output stage is DIP-selectable for 4 ohm, 8 ohm, 70 V, and 100 V, letting the same unit drive high-Z distributed ceiling systems or low-Z surface speakers. Gain, bass, and treble controls are located on the rear panel for a secure set-and-forget configuration, with a clean front panel that prevents tampering in public-facing installations. A four-stage temperature-controlled fan keeps the unit quiet at low output and cool under sustained load, and remote power standby reduces idle consumption for energy-conscious deployments. Built for continuous fixed-install use, this Dynacord U Series amplifier integrates cleanly downstream of paging controllers and audio DSP. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e at Creation Networks, or for an install amplifier with onboard DSP see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1300fdi-dsp-power-amplifier\"\u003eDynacord C1300FDi DSP power amplifier\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 W Class-D Power Amplifier\u003c\/strong\u003e — Single-channel Class-D output delivers 120 W with high efficiency and low heat for continuous commercial operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 V \/ 100 V and Low-Z Output\u003c\/strong\u003e — Selectable 4 ohm, 8 ohm, 70 V, and 100 V operation supports both distributed high-Z and direct low-Z loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced and Unbalanced Line Inputs\u003c\/strong\u003e — A balanced 3-pin Eurostyle input and an unbalanced RCA input accept signal from mixers, DSP, and matrix systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Priority Override\u003c\/strong\u003e — A dedicated emergency input accepts line-level or 100 V signals with level selection so critical messages take precedence over program audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear-Panel Set-and-Forget Controls\u003c\/strong\u003e — Gain, bass, and treble adjustments sit on the rear panel, leaving a clean front face that prevents tampering in public spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Stage Cooling\u003c\/strong\u003e — A temperature-controlled four-stage fan keeps the amplifier quiet at low levels and stable under sustained load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 120 Hz High-Pass Filter\u003c\/strong\u003e — A selectable HPF removes unwanted low-frequency content to protect speakers and improve speech clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Chassis\u003c\/strong\u003e — Included brackets allow single, side-by-side rack, table-top, or under-counter mounting, with two units fitting one rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power Standby\u003c\/strong\u003e — Contact-closure remote power off reduces standby consumption to 1.25 W for energy-conscious installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eTraining rooms\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated output power (IHF-A-202)\u003c\/td\u003e\n\u003ctd\u003e120 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput modes\u003c\/td\u003e\n\u003ctd\u003e4 ohm, 8 ohm, 70 V, 100 V (DIP selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput stage topology\u003c\/td\u003e\n\u003ctd\u003eClass D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax output voltage (1 kHz, THD 0.5%, no load)\u003c\/td\u003e\n\u003ctd\u003e22 VRMS (4 ohm) \/ 32 VRMS (8 ohm) \/ 71 VRMS (70 V) \/ 102 VRMS (100 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e1 balanced line (3-pin Eurostyle), 1 unbalanced line (RCA), EMG priority input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput sensitivity\u003c\/td\u003e\n\u003ctd\u003e500 mV (balanced) \/ 250 mV (unbalanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response (any input to output, -3 dB)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;20 Hz - 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistortion\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.5% at rated output power, 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-noise ratio (A-weighted)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;100 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEqualization\u003c\/td\u003e\n\u003ctd\u003eBass +\/-12 dB \/ 100 Hz; Treble +\/-12 dB \/ 10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-pass filter\u003c\/td\u003e\n\u003ctd\u003eSwitchable 120 Hz, 12 dB\/oct (permanent 20 Hz lo-cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoudspeaker connector\u003c\/td\u003e\n\u003ctd\u003e4-pin Eurostyle (2-pin LoZ, 2-pin HiZ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains power supply\u003c\/td\u003e\n\u003ctd\u003e100 - 240 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby power consumption\u003c\/td\u003e\n\u003ctd\u003e1.25 W (remote off active)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFour-stage fan (Off \/ Slow \/ Medium \/ Fast)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e44.2 x 218 x 210 mm (1.74 x 8.6 x 8.26 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e1.8 kg (3.96 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 C to 45 C (23 F to 113 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIEC protection class\u003c\/td\u003e\n\u003ctd\u003eClass I (grounded)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord U120:1 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the U120:1 support both 70 V and 100 V distributed speaker systems?\u003c\/strong\u003e\u003cbr\u003eYes. The output is DIP-switch selectable for 4 ohm, 8 ohm, 70 V, and 100 V, so it works with high-Z distributed ceiling and pendant systems as well as low-Z surface speakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this model include a mixer?\u003c\/strong\u003e\u003cbr\u003eNo. The U120:1 is a power amplifier with one balanced and one unbalanced line input plus an EMG priority input. It is intended to sit downstream of a mixer, DSP, or paging controller. For an integrated mixer, see the U120:1M model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are the controls on the rear panel?\u003c\/strong\u003e\u003cbr\u003eGain, bass, and treble are placed on the rear panel as a set-and-forget design, leaving a clean front face that prevents accidental or unauthorized adjustment in public-facing installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it handle emergency announcements?\u003c\/strong\u003e\u003cbr\u003eThe dedicated EMG priority input accepts line-level or 100 V signals with selectable level and overrides program audio so critical messages are heard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the amplifier mounted in an equipment rack?\u003c\/strong\u003e\u003cbr\u003eThe half-rack 1U chassis ships with brackets for single rack-mount, side-by-side mounting (two units per rack space), table-top, or under-counter installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e\u003cbr\u003eDynacord products carry the manufacturer's standard warranty. Creation Networks provides pre-sale system design guidance and post-sale support for commercial AV deployments. Contact our team through the Creation Networks site for documentation and assistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this model suitable for 24\/7 operation?\u003c\/strong\u003e\u003cbr\u003eYes. The Class-D design, four-stage cooling, protection circuitry, and remote standby make it appropriate for continuous fixed-install commercial use.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741652828396,"sku":"U120:1-US","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DYN-U120-1-US_0d6fbcbe-c2f1-41fa-9bd0-e2d62c657264.jpg?v=1781711978"},{"product_id":"dynacord-u240-1-us-240w-single-channel-power-amplifier","title":"Dynacord U240:1-US – 240W Single-Channel Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord U240:1 is a 240 W single-channel power amplifier for fixed commercial audio systems driven by an external mixer or DSP front end. As a 70V power amplifier supporting 70 V, 100 V, 4 ohm, and 8 ohm loads, it is the highest-output power amplifier in the U Series, suited to larger distributed audio zones for background music and paging in retail, hospitality, and worship spaces. With rear-panel controls and a half-rack chassis, it is a set-and-forget install amplifier for spaces where front-panel access should be restricted.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe U240:1 is a power-amplifier-only member of the Dynacord U Series, delivering 240 W of Class-D output without an onboard mixer, making it ideal where a separate mixer, DSP, or matrix supplies the program signal. It accepts one balanced line input on a 3-pin Eurostyle connector and one unbalanced line input on RCA (summed to mono), plus a dedicated EMG priority input that takes line-level or 100 V signals so emergency and all-call messages override program audio. The output stage is DIP-selectable for 4 ohm, 8 ohm, 70 V, and 100 V, letting the same unit drive longer high-Z distributed speaker runs or low-Z surface speakers. Gain, bass, and treble controls are located on the rear panel for a secure set-and-forget configuration, with a clean front panel that prevents tampering in public-facing installations. A four-stage temperature-controlled fan keeps the unit quiet at low output and cool under sustained load, and remote power standby reduces idle consumption for energy-conscious deployments. Built for continuous fixed-install use, this Dynacord U Series amplifier integrates cleanly downstream of paging controllers and audio DSP. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e at Creation Networks, or for an install amplifier with onboard DSP see the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c1300fdi-dsp-power-amplifier\"\u003eDynacord C1300FDi DSP power amplifier\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e240 W Class-D Power Amplifier\u003c\/strong\u003e — The highest-output U Series power amplifier delivers 240 W with high efficiency for larger zones and longer 70 V\/100 V runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 V \/ 100 V and Low-Z Output\u003c\/strong\u003e — Selectable 4 ohm, 8 ohm, 70 V, and 100 V operation supports both distributed high-Z and direct low-Z loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced and Unbalanced Line Inputs\u003c\/strong\u003e — A balanced 3-pin Eurostyle input and an unbalanced RCA input accept signal from mixers, DSP, and matrix systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Priority Override\u003c\/strong\u003e — A dedicated emergency input accepts line-level or 100 V signals with level selection so critical messages take precedence over program audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear-Panel Set-and-Forget Controls\u003c\/strong\u003e — Gain, bass, and treble adjustments sit on the rear panel, leaving a clean front face that prevents tampering in public spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Stage Cooling\u003c\/strong\u003e — A temperature-controlled four-stage fan keeps the amplifier quiet at low levels and stable under sustained load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 120 Hz High-Pass Filter\u003c\/strong\u003e — A selectable HPF removes unwanted low-frequency content to protect speakers and improve speech clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Chassis\u003c\/strong\u003e — Included brackets allow single, side-by-side rack, table-top, or under-counter mounting, with two units fitting one rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power Standby\u003c\/strong\u003e — Contact-closure remote power off reduces standby consumption to 1.25 W for energy-conscious installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eGovernment spaces\u003c\/li\u003e\n\u003cli\u003eAll-hands rooms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated output power (IHF-A-202)\u003c\/td\u003e\n\u003ctd\u003e240 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput modes\u003c\/td\u003e\n\u003ctd\u003e4 ohm, 8 ohm, 70 V, 100 V (DIP selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput stage topology\u003c\/td\u003e\n\u003ctd\u003eClass D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax output voltage (1 kHz, THD 0.5%, no load)\u003c\/td\u003e\n\u003ctd\u003e31 VRMS (4 ohm) \/ 45 VRMS (8 ohm) \/ 71 VRMS (70 V) \/ 102 VRMS (100 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e1 balanced line (3-pin Eurostyle), 1 unbalanced line (RCA), EMG priority input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput sensitivity\u003c\/td\u003e\n\u003ctd\u003e500 mV (balanced) \/ 250 mV (unbalanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response (any input to output, -3 dB)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;20 Hz - 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistortion\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.5% at rated output power, 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-noise ratio (A-weighted)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;100 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEqualization\u003c\/td\u003e\n\u003ctd\u003eBass +\/-12 dB \/ 100 Hz; Treble +\/-12 dB \/ 10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-pass filter\u003c\/td\u003e\n\u003ctd\u003eSwitchable 120 Hz, 12 dB\/oct (permanent 20 Hz lo-cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoudspeaker connector\u003c\/td\u003e\n\u003ctd\u003e4-pin Eurostyle (2-pin LoZ, 2-pin HiZ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains power supply\u003c\/td\u003e\n\u003ctd\u003e100 - 240 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby power consumption\u003c\/td\u003e\n\u003ctd\u003e1.25 W (remote off active)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFour-stage fan (Off \/ Slow \/ Medium \/ Fast)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e44.2 x 218 x 210 mm (1.74 x 8.6 x 8.26 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e1.8 kg (3.96 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 C to 45 C (23 F to 113 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIEC protection class\u003c\/td\u003e\n\u003ctd\u003eClass I (grounded)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord U240:1 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the U240:1 support both 70 V and 100 V distributed speaker systems?\u003c\/strong\u003e\u003cbr\u003eYes. The output is DIP-switch selectable for 4 ohm, 8 ohm, 70 V, and 100 V, so it works with high-Z distributed ceiling and pendant systems as well as low-Z surface speakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many speakers can 240 W drive on a 70 V\/100 V line?\u003c\/strong\u003e\u003cbr\u003eTotal connected speaker tap wattage should stay within the 240 W rating with headroom for line losses. Sum the tap settings of all speakers in the zone and confirm the total fits within the amplifier rating during system design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this model include a mixer?\u003c\/strong\u003e\u003cbr\u003eNo. The U240:1 is a power amplifier with one balanced and one unbalanced line input plus an EMG priority input. It is intended to sit downstream of a mixer, DSP, or paging controller. For an integrated mixer, see the U240:1M model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are the controls on the rear panel?\u003c\/strong\u003e\u003cbr\u003eGain, bass, and treble are placed on the rear panel as a set-and-forget design, leaving a clean front face that prevents accidental or unauthorized adjustment in public-facing installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the amplifier mounted in an equipment rack?\u003c\/strong\u003e\u003cbr\u003eThe half-rack 1U chassis ships with brackets for single rack-mount, side-by-side mounting (two units per rack space), table-top, or under-counter installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty and support are available?\u003c\/strong\u003e\u003cbr\u003eDynacord products carry the manufacturer's standard warranty. Creation Networks provides pre-sale system design guidance and post-sale support for commercial AV deployments. Contact our team through the Creation Networks site for documentation and assistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this model suitable for 24\/7 operation?\u003c\/strong\u003e\u003cbr\u003eYes. The Class-D design, four-stage cooling, protection circuitry, and remote standby make it appropriate for continuous fixed-install commercial use.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741652861164,"sku":"U240:1-US","price":489.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DYN-U240-1-US_07c2fd2e-0557-48f3-bfde-d9989d067d54.jpg?v=1781711984"},{"product_id":"dynacord-ix15-4-us-4-channel-1-5kw-networked-dsp-amplifier","title":"Dynacord IX15:4-US – 4-Channel 1.5kW Networked DSP Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord IX15:4 is a 4-channel networked DSP amplifier delivering 1.5 kW of total output power for fixed commercial AV installations that combine distributed audio and foreground sound. Built on powerTANK technology, this rack-mount amplifier drives both high-Z (70V\/100V) and low-Z loudspeaker loads, making it a practical core for multi-zone networked audio. With 8x8 Dante and OMNEO (Dante audio plus OCA\/AES70 control), the IX15:4 integrates directly into managed AV networks for centralized monitoring and control. It suits integrators standardizing on a single 96 kHz DSP amplifier platform across diverse room types.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe IX15:4 occupies a single rack unit and combines four amplifier channels with a fully featured 96 kHz DSP engine, so signal routing, equalization, dynamics, and loudspeaker tuning are handled inside one device. Its 12 x 12 matrix mixer, FIR-Drive speaker processing, and Dynacord FX let a system designer build complete signal chains without external processors. Four mic\/line inputs accept local sources directly or serve as Dante break-in points, while eight Dante inputs and eight Dante outputs carry networked audio across the install. The MXE-style TaskEngine adds system logic, scheduling, and automation for integration with third-party control. ghostPOWER over PoE keeps the DSP, Dante network, and mic\/line inputs active independent of mains power, which protects paging and monitoring during AC interruptions. ecoRAIL energy management reduces operating cost in always-on deployments. The amplifier drives high-Z distributed lines and low-Z point-source or array loudspeakers, so a single unit can serve both background zones and a primary speech-reinforcement system. The IX15:4 is configured and controlled in SONICUE Sound System Software and can act as a SONICUE control server for WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows devices. Integrators evaluating the broader Dynacord lineup can compare options across the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e, and reference the higher-power two-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi\u003c\/a\u003e for large-format low-Z requirements.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5 kW powerTANK output\u003c\/strong\u003e — Delivers 1.5 kW of total power across four channels for mixed high-Z and low-Z loudspeaker systems in one chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x8 Dante networking\u003c\/strong\u003e — Provides eight Dante inputs and eight Dante outputs for distributed audio transport across a managed AV network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOMNEO with OCA\/AES70\u003c\/strong\u003e — Combines Dante audio with standards-based OCA\/AES70 remote control for monitoring and configuration over IP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e96 kHz DSP with matrix mixer\u003c\/strong\u003e — Runs a 12 x 12 matrix mixer with EQ, dynamics, FIR-Drive, and Dynacord FX so external processing is not required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Z and low-Z operation\u003c\/strong\u003e — Drives 70V and 100V distributed lines as well as low-impedance loudspeakers, covering background and foreground zones together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMXE-style TaskEngine\u003c\/strong\u003e — Adds scheduling, automation, and system logic for integration with third-party control systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eghostPOWER over PoE\u003c\/strong\u003e — Maintains the DSP, Dante network, and mic\/line inputs during mains loss using IEEE 802.3af PoE on the primary port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE control server\u003c\/strong\u003e — Configured in SONICUE and able to serve WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows clients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1U rack-mount chassis\u003c\/strong\u003e — Fits a single rack unit with front-to-rear temperature-controlled cooling for dense equipment racks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal rated output power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAmplifier channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (8 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (4 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Drive (per channel, 100 V)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Drive (per channel, 70 V)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e750 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput stage topology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage gain (Low-Z, ref. 1 kHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 dB, adjustable 20.0 - 44.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTHD+N (3 dB below max, 1 kHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency response (Analog In to Speaker Out)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping factor (20 Hz to 200 Hz, 8 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDSP sampling rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e96 kHz internal, Dante 48\/96 kHz switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLatency (Analog In to Speaker Out)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.77 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatrix mixer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 x 12 with stereo FX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker FIR\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 1025 taps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork audio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 ch in \/ 8 ch out, 48\/96 kHz, Dante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork ports\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 x RJ45, 1000base-T, integrated switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMic\/line inputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 (Euroblock), gain 0 to 60 dB, +48 V phantom switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x 8-pin Euroblock, 2.5 mm² \/ 12 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBackup power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eghostPOWER, 1 x PoE (IEEE 802.3af) on primary port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated power consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIdle \/ Eco mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandby mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 15 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50 Hz to 60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, temperature-controlled fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e483 x 44.1 x 447 mm (19 x 1.74 x 17 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 kg (15.4 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord IX15:4 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the IX15:4 support Dante and OMNEO for AV system integration?\u003c\/strong\u003e\u003cbr\u003eYes. The IX15:4 provides 8x8 Dante audio transport and OMNEO with OCA\/AES70 control, so it integrates into managed Dante networks for both audio routing and IP-based monitoring and configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive both 70V\/100V distributed lines and low-Z loudspeakers?\u003c\/strong\u003e\u003cbr\u003eYes. powerTANK technology allows each channel to operate in high-Z (70V\/100V) Direct Drive mode or low-Z mode, so one amplifier can serve distributed background zones and foreground speech reinforcement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the amplifier configured and controlled?\u003c\/strong\u003e\u003cbr\u003eThe IX15:4 is configured in Dynacord SONICUE Sound System Software and can serve as a SONICUE control server for WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens to the system during a mains power interruption?\u003c\/strong\u003e\u003cbr\u003eghostPOWER over PoE keeps the DSP, Dante network, and mic\/line inputs active independent of mains power, which preserves signal presence and network connectivity during AC loss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe IX15:4 is a 1U rack-mount unit measuring 483 x 44.1 x 447 mm with front-to-rear forced-air cooling suitable for installation in standard equipment racks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat inputs are available for local sources?\u003c\/strong\u003e\u003cbr\u003eIt has four mic\/line inputs on Euroblock connectors with 0 to 60 dB gain and switchable +48 V phantom power, and these can also serve as Dante break-in points to the network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Creation Networks provide support and warranty service?\u003c\/strong\u003e\u003cbr\u003eYes. Creation Networks supplies Dynacord IX series amplifiers with manufacturer warranty and can assist with product selection and AV system integration questions.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741653025004,"sku":"IX15:4-US","price":3273.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DYN-IX15-4-US_9942f2d9-320d-492f-8c31-c180eb631ece.jpg?v=1781711990"},{"product_id":"dynacord-ix30-4-us-4-channel-3kw-networked-dsp-amplifier","title":"Dynacord IX30:4-US – 4-Channel 3kW Networked DSP Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord IX30:4 is a 4-channel networked DSP amplifier delivering 3 kW of total output power for mid-scale commercial AV installations that mix distributed audio with foreground reinforcement. Using powerTANK technology, this rack-mount amplifier drives both high-Z (70V\/100V) and low-Z loudspeaker loads from a single chassis. With 8x8 Dante and OMNEO (Dante audio plus OCA\/AES70 control), the IX30:4 integrates directly into managed AV networks for centralized control and monitoring. It gives integrators a 96 kHz DSP amplifier platform that scales across boardrooms, worship spaces, and multi-purpose venues.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe IX30:4 fits a single rack unit and pairs four amplifier channels with a fully featured 96 kHz DSP engine, consolidating routing, equalization, dynamics, and loudspeaker tuning inside one device. Its 12 x 12 matrix mixer, FIR-Drive speaker processing, and Dynacord FX let a system designer build complete signal chains without separate processors. Four mic\/line inputs accept local sources directly or act as Dante break-in points, while eight Dante inputs and eight Dante outputs move networked audio across the install. The MXE-style TaskEngine handles system logic, scheduling, and automation for integration with third-party control. ghostPOWER over PoE keeps the DSP, Dante network, and mic\/line inputs active independent of mains power, which protects paging and monitoring during AC interruptions. ecoRAIL energy management lowers operating cost in always-on deployments. With 3 kW of total power, the IX30:4 drives high-Z distributed lines and low-Z point-source or array loudspeakers, so one unit can support background zones and a primary speech-reinforcement system. The amplifier is configured and controlled in SONICUE Sound System Software and can act as a SONICUE control server for WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows devices. Integrators comparing models can review the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e, and reference the higher-power two-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi\u003c\/a\u003e for large-format low-Z requirements.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 kW powerTANK output\u003c\/strong\u003e — Delivers 3 kW of total power across four channels for mixed high-Z and low-Z loudspeaker systems in one chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x8 Dante networking\u003c\/strong\u003e — Provides eight Dante inputs and eight Dante outputs for distributed audio transport across a managed AV network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOMNEO with OCA\/AES70\u003c\/strong\u003e — Combines Dante audio with standards-based OCA\/AES70 remote control for IP-based monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e96 kHz DSP with matrix mixer\u003c\/strong\u003e — Runs a 12 x 12 matrix mixer with EQ, dynamics, FIR-Drive, and Dynacord FX so external processing is not required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Z and low-Z operation\u003c\/strong\u003e — Drives 70V and 100V distributed lines as well as low-impedance loudspeakers, covering background and foreground zones together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMXE-style TaskEngine\u003c\/strong\u003e — Adds scheduling, automation, and system logic for integration with third-party control systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eghostPOWER over PoE\u003c\/strong\u003e — Maintains the DSP, Dante network, and mic\/line inputs during mains loss using IEEE 802.3af PoE on the primary port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE control server\u003c\/strong\u003e — Configured in SONICUE and able to serve WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows clients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1U rack-mount chassis\u003c\/strong\u003e — Fits a single rack unit with front-to-rear temperature-controlled cooling for dense equipment racks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal rated output power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAmplifier channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (8 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (4 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Drive (per channel, 100 V)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Drive (per channel, 70 V)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e750 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output voltage (Hi-Z\/8 Ω mode, per channel)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e145 Vpk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output current (Lo-Z\/4 Ω mode, per channel)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e33 Apk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput stage topology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage gain (Low-Z, ref. 1 kHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 dB, adjustable 20.0 - 44.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDSP sampling rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e96 kHz internal, Dante 48\/96 kHz switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatrix mixer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 x 12 with stereo FX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker FIR\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 1025 taps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork audio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 ch in \/ 8 ch out, 48\/96 kHz, Dante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork ports\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 x RJ45, 1000base-T, integrated switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMic\/line inputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 (Euroblock), gain 0 to 60 dB, +48 V phantom switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBackup power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eghostPOWER, 1 x PoE (IEEE 802.3af) on primary port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50 Hz to 60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, temperature-controlled fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e483 x 44.1 x 447 mm (19 x 1.74 x 17 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16.4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord IX30:4 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the IX30:4 support Dante and OMNEO for AV system integration?\u003c\/strong\u003e\u003cbr\u003eYes. The IX30:4 provides 8x8 Dante audio transport and OMNEO with OCA\/AES70 control, so it integrates into managed Dante networks for audio routing and IP-based monitoring and configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive both 70V\/100V distributed lines and low-Z loudspeakers?\u003c\/strong\u003e\u003cbr\u003eYes. powerTANK technology lets each channel operate in high-Z (70V\/100V) Direct Drive mode or low-Z mode, so one amplifier can serve distributed background zones and foreground speech reinforcement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the amplifier configured and controlled?\u003c\/strong\u003e\u003cbr\u003eThe IX30:4 is configured in Dynacord SONICUE Sound System Software and can serve as a SONICUE control server for WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens to the system during a mains power interruption?\u003c\/strong\u003e\u003cbr\u003eghostPOWER over PoE keeps the DSP, Dante network, and mic\/line inputs active independent of mains power, preserving signal presence and network connectivity during AC loss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe IX30:4 is a 1U rack-mount unit measuring 483 x 44.1 x 447 mm with front-to-rear forced-air cooling suitable for standard equipment racks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat inputs are available for local sources?\u003c\/strong\u003e\u003cbr\u003eIt has four mic\/line inputs on Euroblock connectors with 0 to 60 dB gain and switchable +48 V phantom power, and these can also serve as Dante break-in points to the network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Creation Networks provide support and warranty service?\u003c\/strong\u003e\u003cbr\u003eYes. Creation Networks supplies Dynacord IX series amplifiers with manufacturer warranty and can assist with product selection and AV system integration questions.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741653057772,"sku":"IX30:4-US","price":3838.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/554753.jpg?v=1781711874"},{"product_id":"dynacord-ix60-4-us-4-channel-6kw-networked-dsp-amplifier","title":"Dynacord IX60:4-US – 4-Channel 6kW Networked DSP Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord IX60:4 is a 4-channel networked DSP amplifier delivering 6 kW of total output power for large-format commercial AV installations driving demanding low-Z loudspeaker systems and high-Z distributed lines. Built on powerTANK technology, this rack-mount amplifier handles both high-Z (70V\/100V) and low-Z loads from a single chassis. With 8x8 Dante and OMNEO (Dante audio plus OCA\/AES70 control), the IX60:4 integrates directly into managed AV networks for centralized control and monitoring. It gives system designers a high-output 96 kHz DSP amplifier platform for auditoriums, worship spaces, and large meeting venues.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe IX60:4 fits a single rack unit and combines four high-output amplifier channels with a fully featured 96 kHz DSP engine, consolidating routing, equalization, dynamics, and loudspeaker tuning inside one device. Its 12 x 12 matrix mixer, FIR-Drive speaker processing, and Dynacord FX let a system designer build complete signal chains without external processors. Four mic\/line inputs accept local sources directly or act as Dante break-in points, while eight Dante inputs and eight Dante outputs carry networked audio across the install. The MXE-style TaskEngine handles system logic, scheduling, and automation for integration with third-party control. ghostPOWER over PoE keeps the DSP, Dante network, and mic\/line inputs active independent of mains power, protecting paging and monitoring during AC interruptions. ecoRAIL energy management reduces operating cost in always-on deployments. With 6 kW of total power and per-channel output up to 1,800 W, the IX60:4 drives high-Z distributed lines and large low-Z point-source or array loudspeakers, supporting primary reinforcement and distributed zones together. The amplifier is configured and controlled in SONICUE Sound System Software and can act as a SONICUE control server for WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows devices. Integrators comparing models can review the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e, and reference the two-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi\u003c\/a\u003e for dual-channel high-power low-Z requirements.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 kW powerTANK output\u003c\/strong\u003e — Delivers 6 kW of total power across four channels, with up to 1,800 W per channel for demanding low-Z loudspeaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x8 Dante networking\u003c\/strong\u003e — Provides eight Dante inputs and eight Dante outputs for distributed audio transport across a managed AV network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOMNEO with OCA\/AES70\u003c\/strong\u003e — Combines Dante audio with standards-based OCA\/AES70 remote control for IP-based monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e96 kHz DSP with matrix mixer\u003c\/strong\u003e — Runs a 12 x 12 matrix mixer with EQ, dynamics, FIR-Drive, and Dynacord FX so external processing is not required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Z and low-Z operation\u003c\/strong\u003e — Drives 70V and 100V distributed lines as well as low-impedance loudspeakers, covering background and foreground zones together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMXE-style TaskEngine\u003c\/strong\u003e — Adds scheduling, automation, and system logic for integration with third-party control systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eghostPOWER over PoE\u003c\/strong\u003e — Maintains the DSP, Dante network, and mic\/line inputs during mains loss using IEEE 802.3af PoE on the primary port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE control server\u003c\/strong\u003e — Configured in SONICUE and able to serve WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows clients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1U rack-mount chassis\u003c\/strong\u003e — Fits a single rack unit with front-to-rear temperature-controlled cooling for dense equipment racks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal rated output power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAmplifier channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (4 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,800 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (2.7 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (8 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Drive (per channel, 100 V)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,800 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Drive (per channel, 70 V)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output voltage (per channel)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e145 Vpeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output current (per channel)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e33 Apeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput stage topology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage gain (Low-Z, ref. 1 kHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 dB, adjustable 20.0 - 44.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTHD+N (3 dB below max, 1 kHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency response (Analog In to Speaker Out)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDamping factor (20 Hz to 200 Hz, 8 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDSP sampling rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e96 kHz internal, Dante 48\/96 kHz switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLatency (Analog In to Speaker Out)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.77 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatrix mixer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 x 12 with stereo FX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker FIR\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 1025 taps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork audio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 ch in \/ 8 ch out, 48\/96 kHz, Dante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork ports\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 x RJ45, 1000base-T, integrated switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMic\/line inputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 (Euroblock), gain 0 to 60 dB, +48 V phantom switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 x 4-pin Euroblock, 6.0 mm² \/ 10 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBackup power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eghostPOWER, 1 x PoE (IEEE 802.3af) on primary port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated power consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,050 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIdle \/ Eco mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e34 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandby mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 15 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50 Hz to 60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, temperature-controlled fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e483 x 44.1 x 447 mm (19 x 1.74 x 17 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.6 kg (19 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord IX60:4 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the IX60:4 support Dante and OMNEO for AV system integration?\u003c\/strong\u003e\u003cbr\u003eYes. The IX60:4 provides 8x8 Dante audio transport and OMNEO with OCA\/AES70 control, so it integrates into managed Dante networks for audio routing and IP-based monitoring and configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive both 70V\/100V distributed lines and low-Z loudspeakers?\u003c\/strong\u003e\u003cbr\u003eYes. powerTANK technology lets each channel operate in high-Z (70V\/100V) Direct Drive mode or low-Z mode, with up to 1,800 W per channel for demanding low-impedance loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the amplifier configured and controlled?\u003c\/strong\u003e\u003cbr\u003eThe IX60:4 is configured in Dynacord SONICUE Sound System Software and can serve as a SONICUE control server for WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens to the system during a mains power interruption?\u003c\/strong\u003e\u003cbr\u003eghostPOWER over PoE keeps the DSP, Dante network, and mic\/line inputs active independent of mains power, preserving signal presence and network connectivity during AC loss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the speaker output connection?\u003c\/strong\u003e\u003cbr\u003eThe IX60:4 uses two 4-pin Euroblock speaker connectors rated for 6.0 mm² \/ 10 AWG conductors to support its higher per-channel output current.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe IX60:4 is a 1U rack-mount unit measuring 483 x 44.1 x 447 mm with front-to-rear forced-air cooling suitable for standard equipment racks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Creation Networks provide support and warranty service?\u003c\/strong\u003e\u003cbr\u003eYes. Creation Networks supplies Dynacord IX series amplifiers with manufacturer warranty and can assist with product selection and AV system integration questions.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741653090540,"sku":"IX60:4-US","price":5757.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DYN-IX60-4-US.jpg?v=1781711995"},{"product_id":"dynacord-ix30-8-us-8-channel-3kw-networked-dsp-amplifier","title":"Dynacord IX30:8-US – 8-Channel 3kW Networked DSP Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord IX30:8 is an 8-channel networked DSP amplifier delivering 3 kW of total output power for multi-zone commercial AV installations that need high channel density in a single rack unit. Using powerTANK technology, this rack-mount amplifier drives both high-Z (70V\/100V) and low-Z loudspeaker loads across eight channels. With 8x8 Dante and OMNEO (Dante audio plus OCA\/AES70 control), the IX30:8 integrates directly into managed AV networks for centralized control of distributed audio. It suits integrators consolidating many zones onto one 96 kHz DSP amplifier platform.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe IX30:8 fits a single rack unit and pairs eight amplifier channels with a fully featured 96 kHz DSP engine, consolidating routing, equalization, dynamics, and loudspeaker tuning inside one device. Its 16 x 16 matrix mixer, FIR-Drive speaker processing, and Dynacord FX let a system designer build complete signal chains for many zones without external processors. Eight mic\/line inputs accept local sources directly or act as Dante break-in points, while eight Dante inputs and eight Dante outputs carry networked audio across the install. The MXE-style TaskEngine handles system logic, scheduling, and automation for integration with third-party control. ghostPOWER over PoE keeps the DSP, Dante network, and mic\/line inputs active independent of mains power, protecting paging and monitoring during AC interruptions. ecoRAIL energy management lowers operating cost in always-on deployments. With eight channels of high-Z and low-Z capability, the IX30:8 is well suited to dense multi-zone distributed audio where many independent outputs are required from limited rack space. The amplifier is configured and controlled in SONICUE Sound System Software and can act as a SONICUE control server for WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows devices. Integrators comparing models can review the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e, and reference the two-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi\u003c\/a\u003e for high-power dual-channel low-Z requirements.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 channels in 1U\u003c\/strong\u003e — Provides eight independent amplifier channels with 3 kW total power for dense multi-zone distributed audio in a single rack unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 x 16 matrix mixer\u003c\/strong\u003e — Runs a fully featured 96 kHz DSP with a 16 x 16 matrix mixer, EQ, dynamics, FIR-Drive, and Dynacord FX so external processing is not required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x8 Dante networking\u003c\/strong\u003e — Provides eight Dante inputs and eight Dante outputs for distributed audio transport across a managed AV network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOMNEO with OCA\/AES70\u003c\/strong\u003e — Combines Dante audio with standards-based OCA\/AES70 remote control for IP-based monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Z and low-Z operation\u003c\/strong\u003e — Drives 70V and 100V distributed lines as well as low-impedance loudspeakers across all eight channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight mic\/line inputs\u003c\/strong\u003e — Accepts eight local mic or line sources that can also serve as Dante break-in points to the network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMXE-style TaskEngine\u003c\/strong\u003e — Adds scheduling, automation, and system logic for integration with third-party control systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eghostPOWER over PoE\u003c\/strong\u003e — Maintains the DSP, Dante network, and mic\/line inputs during mains loss using IEEE 802.3af PoE on the primary port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE control server\u003c\/strong\u003e — Configured in SONICUE and able to serve WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows clients.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal rated output power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAmplifier channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (8 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (4 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Drive (per channel, 100 V)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Drive (per channel, 70 V)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e750 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output voltage (Hi-Z\/8 Ω mode, per channel)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e145 Vpk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output current (Lo-Z\/4 Ω mode, per channel)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e33 Apk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput stage topology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage gain (Low-Z, ref. 1 kHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 dB, adjustable 20.0 - 44.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDSP sampling rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e96 kHz internal, Dante 48\/96 kHz switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatrix mixer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16 x 16 with stereo FX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker FIR\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 1025 taps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork audio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 ch in \/ 8 ch out, 48\/96 kHz, Dante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork ports\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 x RJ45, 1000base-T, integrated switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMic\/line inputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 (Euroblock), gain 0 to 60 dB, +48 V phantom switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBackup power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eghostPOWER, 1 x PoE (IEEE 802.3af) on primary port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50 Hz to 60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, temperature-controlled fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e483 x 44.1 x 447 mm (19 x 1.74 x 17 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord IX30:8 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the IX30:8 support Dante and OMNEO for AV system integration?\u003c\/strong\u003e\u003cbr\u003eYes. The IX30:8 provides 8x8 Dante audio transport and OMNEO with OCA\/AES70 control, so it integrates into managed Dante networks for audio routing and IP-based monitoring and configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose the 8-channel IX30:8 over a 4-channel model?\u003c\/strong\u003e\u003cbr\u003eThe IX30:8 offers eight independent amplifier channels and a 16 x 16 matrix mixer in 1U, which suits dense multi-zone distributed audio where many outputs are needed from limited rack space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive both 70V\/100V distributed lines and low-Z loudspeakers?\u003c\/strong\u003e\u003cbr\u003eYes. powerTANK technology lets each of the eight channels operate in high-Z (70V\/100V) Direct Drive mode or low-Z mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the amplifier configured and controlled?\u003c\/strong\u003e\u003cbr\u003eThe IX30:8 is configured in Dynacord SONICUE Sound System Software and can serve as a SONICUE control server for WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens to the system during a mains power interruption?\u003c\/strong\u003e\u003cbr\u003eghostPOWER over PoE keeps the DSP, Dante network, and mic\/line inputs active independent of mains power, preserving signal presence and network connectivity during AC loss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many local inputs does it provide?\u003c\/strong\u003e\u003cbr\u003eIt has eight mic\/line inputs on Euroblock connectors with 0 to 60 dB gain and switchable +48 V phantom power, usable directly or as Dante break-in points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Creation Networks provide support and warranty service?\u003c\/strong\u003e\u003cbr\u003eYes. Creation Networks supplies Dynacord IX series amplifiers with manufacturer warranty and can assist with product selection and AV system integration questions.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741653450988,"sku":"IX30:8-US","price":5588.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DYN-IX30-8-US_8c2a62dc-5cf0-47a7-8f36-705f3e947848.jpg?v=1781711999"},{"product_id":"dynacord-ix60-8-us-8-channel-6kw-networked-dsp-amplifier","title":"Dynacord IX60:8-US – 8-Channel 6kW Networked DSP Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord IX60:8 is an 8-channel networked DSP amplifier delivering 6 kW of total output power for high-density, high-output commercial AV installations. Built on powerTANK technology, this rack-mount amplifier drives both high-Z (70V\/100V) and low-Z loudspeaker loads across eight channels from a single rack unit. With 8x8 Dante and OMNEO (Dante audio plus OCA\/AES70 control), the IX60:8 integrates directly into managed AV networks for centralized control of distributed audio. It gives system designers the highest channel-and-power density in the IX series for large multi-zone venues.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe IX60:8 fits a single rack unit and combines eight high-output amplifier channels with a fully featured 96 kHz DSP engine, consolidating routing, equalization, dynamics, and loudspeaker tuning inside one device. Its 16 x 16 matrix mixer, FIR-Drive speaker processing, and Dynacord FX let a system designer build complete signal chains for many zones without external processors. Eight mic\/line inputs accept local sources directly or act as Dante break-in points, while eight Dante inputs and eight Dante outputs carry networked audio across the install. The MXE-style TaskEngine handles system logic, scheduling, and automation for integration with third-party control. ghostPOWER over PoE keeps the DSP, Dante network, and mic\/line inputs active independent of mains power, protecting paging and monitoring during AC interruptions. ecoRAIL energy management lowers operating cost in always-on deployments. With 6 kW of total power across eight channels, the IX60:8 supports demanding distributed audio and reinforcement zones simultaneously where both high channel count and high output are required. The amplifier is configured and controlled in SONICUE Sound System Software and can act as a SONICUE control server for WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows devices. Integrators comparing models can review the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e, and reference the two-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi\u003c\/a\u003e for high-power dual-channel low-Z requirements.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 channels, 6 kW in 1U\u003c\/strong\u003e — Provides eight independent high-output amplifier channels with 6 kW total power for demanding multi-zone systems in a single rack unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 x 16 matrix mixer\u003c\/strong\u003e — Runs a fully featured 96 kHz DSP with a 16 x 16 matrix mixer, EQ, dynamics, FIR-Drive, and Dynacord FX so external processing is not required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x8 Dante networking\u003c\/strong\u003e — Provides eight Dante inputs and eight Dante outputs for distributed audio transport across a managed AV network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOMNEO with OCA\/AES70\u003c\/strong\u003e — Combines Dante audio with standards-based OCA\/AES70 remote control for IP-based monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Z and low-Z operation\u003c\/strong\u003e — Drives 70V and 100V distributed lines as well as low-impedance loudspeakers across all eight channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight mic\/line inputs\u003c\/strong\u003e — Accepts eight local mic or line sources that can also serve as Dante break-in points to the network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMXE-style TaskEngine\u003c\/strong\u003e — Adds scheduling, automation, and system logic for integration with third-party control systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eghostPOWER over PoE\u003c\/strong\u003e — Maintains the DSP, Dante network, and mic\/line inputs during mains loss using IEEE 802.3af PoE on the primary port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE control server\u003c\/strong\u003e — Configured in SONICUE and able to serve WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows clients.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal rated output power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAmplifier channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAll channels driven equally (4 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (8 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (4 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Drive (per channel, 100 V)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Drive (per channel, 70 V)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e750 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output voltage (Hi-Z\/8 Ω mode, per channel)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e145 Vpk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput stage topology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage gain (Low-Z, ref. 1 kHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 dB, adjustable 20.0 - 44.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDSP sampling rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e96 kHz internal, Dante 48\/96 kHz switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatrix mixer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16 x 16 with stereo FX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker FIR\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 1025 taps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork audio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 ch in \/ 8 ch out, 48\/96 kHz, Dante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork ports\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 x RJ45, 1000base-T, integrated switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMic\/line inputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 (Euroblock), gain 0 to 60 dB, +48 V phantom switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBackup power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eghostPOWER, 1 x PoE (IEEE 802.3af) on primary port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50 Hz to 60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, temperature-controlled fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e483 x 44.1 x 447 mm (19 x 1.74 x 17 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord IX60:8 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the IX60:8 support Dante and OMNEO for AV system integration?\u003c\/strong\u003e\u003cbr\u003eYes. The IX60:8 provides 8x8 Dante audio transport and OMNEO with OCA\/AES70 control, so it integrates into managed Dante networks for audio routing and IP-based monitoring and configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the IX60:8 the top of the IX series?\u003c\/strong\u003e\u003cbr\u003eIt combines eight high-output channels and 6 kW total power with a 16 x 16 matrix mixer in 1U, providing the highest channel-and-power density in the line for large multi-zone venues.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive both 70V\/100V distributed lines and low-Z loudspeakers?\u003c\/strong\u003e\u003cbr\u003eYes. powerTANK technology lets each of the eight channels operate in high-Z (70V\/100V) Direct Drive mode or low-Z mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the amplifier configured and controlled?\u003c\/strong\u003e\u003cbr\u003eThe IX60:8 is configured in Dynacord SONICUE Sound System Software and can serve as a SONICUE control server for WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens to the system during a mains power interruption?\u003c\/strong\u003e\u003cbr\u003eghostPOWER over PoE keeps the DSP, Dante network, and mic\/line inputs active independent of mains power, preserving signal presence and network connectivity during AC loss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many local inputs does it provide?\u003c\/strong\u003e\u003cbr\u003eIt has eight mic\/line inputs on Euroblock connectors with 0 to 60 dB gain and switchable +48 V phantom power, usable directly or as Dante break-in points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Creation Networks provide support and warranty service?\u003c\/strong\u003e\u003cbr\u003eYes. Creation Networks supplies Dynacord IX series amplifiers with manufacturer warranty and can assist with product selection and AV system integration questions.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741653483756,"sku":"IX60:8-US","price":6773.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/547686.jpg?v=1781712004"},{"product_id":"dynacord-ipx5-4-4-channel-4x1250w-install-power-amplifier","title":"Dynacord IPX5:4 – 4-Channel 4x1250W Install Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord IPX5:4 is a 4-channel, 4 x 1250 W DSP install power amplifier built for networked audio in fixed commercial installations. As a rack-mount amplifier with OMNEO IP networking and native Dante connectivity, it serves system designers specifying distributed audio across multiple zones. Variable Load Drive lets each channel run low-impedance or 70V\/100V\/140V direct drive, making it a flexible 4-channel installation amplifier for mixed loudspeaker systems. It is configured and controlled in IRIS-Net and SONICUE for predictable commercial deployment.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe IPX5:4 combines four amplifier channels with a fully integrated 96 kHz DSP engine and FIR Drive technology, consolidating amplification and signal processing into a single 2U rack-mount chassis. Each channel delivers 1250 W into 4 ohms and supports Normal, Bridge, Parallel, and Parallel-Bridge modes for low-Z and high-Z distributed audio. Direct Drive provides 70 V, 100 V, and 140 V (200 V in bridge) operation without a step-up transformer, simplifying 70V\/100V loudspeaker line design. OMNEO transports Dante audio with OCA\/AES70 control, and redundant PRIMARY\/SECONDARY EtherCON ports support network resilience. Onboard DSP includes user EQ, speaker EQ, FIR filtering, crossovers, delay, and peak and RMS limiters with thermal modeling per channel. Pilot tone supervision and source fallback maintain continuity for life-safety-adjacent paging and announcement systems. Integrators configure and monitor the amplifier through IRIS-Net and SONICUE, with impedance measurement and load monitoring for commissioning and ongoing diagnostics. The IPX5:4 sits within the broader \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e, and pairs with higher-output models such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi DSP power amplifier\u003c\/a\u003e for larger system designs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 1250 W Multichannel Amplification\u003c\/strong\u003e — Delivers 1250 W per channel into 4 ohms across four channels for distributed audio in commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Load Drive (VLD)\u003c\/strong\u003e — Each channel operates in low-impedance or 70V\/100V\/140V direct drive, supporting mixed low-Z and high-Z loudspeaker systems without external transformers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOMNEO IP Networking with Dante\u003c\/strong\u003e — Transports networked audio over Dante with OCA\/AES70 control and redundant PRIMARY\/SECONDARY EtherCON ports for resilient deployment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 96 kHz DSP and FIR Drive\u003c\/strong\u003e — Native 96 kHz processing provides user EQ, speaker EQ, FIR filtering, crossovers, and delay per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer-Channel Limiting and Protection\u003c\/strong\u003e — Peak anticipation and RMS\/temperature limiters with thermal modeling protect connected loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot Tone Supervision and Source Fallback\u003c\/strong\u003e — Monitors analog and OMNEO\/Dante inputs and switches to an alternative source to maintain announcement continuity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco Rail High-Efficiency Topology\u003c\/strong\u003e — Class D output with digitally controlled PFC supply reduces operating cost and heat load in the rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIRIS-Net and SONICUE Configuration\u003c\/strong\u003e — Full configuration, control, impedance measurement, and load monitoring through Dynacord software for commissioning and diagnostics.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference rooms and boardrooms\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eGovernment and commercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eTraining rooms\u003c\/li\u003e\n\u003cli\u003eAuditoriums\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Channels\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Output Power (Normal, all channels driven, 4 ohms)\u003c\/td\u003e\n\u003ctd\u003e1250 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Power (8 ohms)\u003c\/td\u003e\n\u003ctd\u003e1250 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Mode (4 ohms \/ 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e2600 W \/ 2500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParallel-Bridge (4 ohms)\u003c\/td\u003e\n\u003ctd\u003e5000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (70 V \/ 100 V, all channels driven)\u003c\/td\u003e\n\u003ctd\u003e1250 W \/ 1250 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (140 V \/ 200 V bridge)\u003c\/td\u003e\n\u003ctd\u003e2500 W \/ 2500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Voltage (Normal, per channel)\u003c\/td\u003e\n\u003ctd\u003e150 Vpeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Current (Normal, per channel)\u003c\/td\u003e\n\u003ctd\u003e41 Apeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (Low-Z)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB, adjustable 20.0-44.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD (3 dB below max, AES17, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (±0.5 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Factor (20-200 Hz, 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal to Noise Ratio (A-weighted, digital input)\u003c\/td\u003e\n\u003ctd\u003e115 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSP Sampling Rate\u003c\/td\u003e\n\u003ctd\u003e48 kHz \/ 96 kHz, OMNEO\/Dante synchronized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Audio Inputs\u003c\/td\u003e\n\u003ctd\u003e8 channels, OMNEO\/Dante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Type\u003c\/td\u003e\n\u003ctd\u003e2 x Neutrik EtherCON\/RJ45, redundant PRIMARY\/SECONDARY, 1000base-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Input\u003c\/td\u003e\n\u003ctd\u003e2 x 6-pin Euroblock, max +21 dBu, 20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Output\u003c\/td\u003e\n\u003ctd\u003e1 x 8-pin Euroblock, 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains Input\u003c\/td\u003e\n\u003ctd\u003e1 x Neutrik powerCON-HC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50-60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Power Consumption\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIdle Mode\u003c\/td\u003e\n\u003ctd\u003e75 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby Mode\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 15 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, temperature controlled fans, supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5 °C to +40 °C (+40 °F to +105 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88.1 x 514.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e14.3 kg (31.5 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord IPX5:4 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the IPX5:4 support Dante networked audio?\u003c\/strong\u003e\u003cbr\u003eYes. The IPX5:4 uses OMNEO IP networking, which transports Dante audio with OCA\/AES70 control and provides 8 network audio input channels over redundant PRIMARY\/SECONDARY EtherCON ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive 70V and 100V distributed loudspeaker lines?\u003c\/strong\u003e\u003cbr\u003eYes. Variable Load Drive provides Direct Drive operation at 70 V, 100 V, and 140 V (200 V in bridge mode) without an external step-up transformer, alongside low-impedance 4-ohm and 8-ohm operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat software is used to configure and control the amplifier?\u003c\/strong\u003e\u003cbr\u003eThe IPX5:4 is configured and controlled in IRIS-Net and SONICUE, including DSP setup, impedance measurement, and load monitoring for commissioning and ongoing diagnostics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe amplifier is a 2U rack-mount chassis measuring 483 x 88.1 x 514.2 mm and weighing 14.3 kg (31.5 lb), with M6 rack-mount screws included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat onboard DSP is available per channel?\u003c\/strong\u003e\u003cbr\u003eEach channel includes native 96 kHz processing with user EQ, speaker EQ, FIR Drive filtering, crossovers, delay, and peak anticipation plus RMS\/temperature limiters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it maintain audio continuity if a source fails?\u003c\/strong\u003e\u003cbr\u003ePilot tone supervision monitors analog and OMNEO\/Dante inputs and automatically switches to an alternative source selection, supporting announcement and paging reliability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the IPX5:4 compare to higher-output Dynacord amplifiers?\u003c\/strong\u003e\u003cbr\u003eFor larger systems requiring more power, consider the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi DSP power amplifier\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e for additional options.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741653516524,"sku":"IPX5:4","price":8500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/352430.jpg?v=1781712008"},{"product_id":"dynacord-ipx10-4-4-channel-4x2500w-install-power-amplifier","title":"Dynacord IPX10:4 – 4-Channel 4x2500W Install Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord IPX10:4 is a 4-channel, 4 x 2500 W DSP install power amplifier engineered for high-output networked audio in demanding commercial installations. As a rack-mount amplifier with OMNEO IP networking and native Dante connectivity, it gives system designers ample headroom for distributed audio across large zones. Variable Load Drive supports low-impedance and 70V\/100V\/140V direct drive on each channel, making it a versatile 4-channel installation amplifier for mixed loudspeaker systems. It is configured and controlled in IRIS-Net and SONICUE for repeatable commercial deployment.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe IPX10:4 delivers four channels of 2500 W into 4 ohms with a fully integrated 96 kHz DSP engine and FIR Drive technology in a single 2U rack-mount chassis. Each channel supports Normal, Bridge, Parallel, and Parallel-Bridge modes for low-Z and high-Z distributed audio, with Parallel-Bridge reaching 10000 W into 4 ohms for high-SPL applications. Direct Drive provides 70 V, 100 V, and 140 V (200 V in bridge) operation without external transformers, simplifying 70V\/100V line design in larger venues. OMNEO transports Dante audio with OCA\/AES70 control over redundant PRIMARY\/SECONDARY EtherCON ports for network resilience. Onboard DSP includes user EQ, speaker EQ, FIR filtering, crossovers, delay, and peak and RMS limiters with thermal modeling per channel. Pilot tone supervision and source fallback maintain continuity for paging and announcement systems. Integrators configure and monitor the amplifier in IRIS-Net and SONICUE, with impedance measurement and load monitoring for commissioning and diagnostics. The IPX10:4 belongs to the broader \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e and complements other DSP install amplifiers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi DSP power amplifier\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 2500 W Multichannel Amplification\u003c\/strong\u003e — Delivers 2500 W per channel into 4 ohms for high-output distributed audio in large commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Load Drive (VLD)\u003c\/strong\u003e — Each channel operates in low-impedance or 70V\/100V\/140V direct drive, supporting mixed low-Z and high-Z loudspeaker systems without external transformers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Power Bridge and Parallel Modes\u003c\/strong\u003e — Parallel-Bridge mode reaches 10000 W into 4 ohms for high-SPL zones and subwoofer applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOMNEO IP Networking with Dante\u003c\/strong\u003e — Transports networked audio over Dante with OCA\/AES70 control and redundant PRIMARY\/SECONDARY EtherCON ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 96 kHz DSP and FIR Drive\u003c\/strong\u003e — Native 96 kHz processing provides user EQ, speaker EQ, FIR filtering, crossovers, and delay per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer-Channel Limiting and Protection\u003c\/strong\u003e — Peak anticipation and RMS\/temperature limiters with thermal modeling protect connected loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot Tone Supervision and Source Fallback\u003c\/strong\u003e — Monitors analog and OMNEO\/Dante inputs and switches to an alternative source for announcement continuity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco Rail High-Efficiency Topology\u003c\/strong\u003e — Class D output with digitally controlled PFC supply lowers operating cost and rack heat load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAuditoriums\u003c\/li\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eGovernment and commercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eAll-hands rooms\u003c\/li\u003e\n\u003cli\u003eConference rooms and boardrooms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Channels\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Output Power (Normal, all channels driven, 4 ohms)\u003c\/td\u003e\n\u003ctd\u003e2500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Power (8 ohms)\u003c\/td\u003e\n\u003ctd\u003e1250 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Mode (4 ohms \/ 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e5200 W \/ 5000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParallel-Bridge (4 ohms)\u003c\/td\u003e\n\u003ctd\u003e10000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (70 V \/ 100 V)\u003c\/td\u003e\n\u003ctd\u003e2500 W \/ 2500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (140 V \/ 200 V bridge)\u003c\/td\u003e\n\u003ctd\u003e5000 W \/ 5000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Voltage (Normal, per channel)\u003c\/td\u003e\n\u003ctd\u003e150 Vpeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Current (Normal, per channel)\u003c\/td\u003e\n\u003ctd\u003e53 Apeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (Low-Z)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB, adjustable 20.0-44.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD (3 dB below max, AES17, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (±0.5 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Factor (20-200 Hz, 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal to Noise Ratio (A-weighted, digital input)\u003c\/td\u003e\n\u003ctd\u003e115 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSP Sampling Rate\u003c\/td\u003e\n\u003ctd\u003e48 kHz \/ 96 kHz, OMNEO\/Dante synchronized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Audio Inputs\u003c\/td\u003e\n\u003ctd\u003e8 channels, OMNEO\/Dante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Type\u003c\/td\u003e\n\u003ctd\u003e2 x Neutrik EtherCON\/RJ45, redundant PRIMARY\/SECONDARY, 1000base-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Input\u003c\/td\u003e\n\u003ctd\u003e2 x 6-pin Euroblock, max +21 dBu, 20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Output\u003c\/td\u003e\n\u003ctd\u003e1 x 8-pin Euroblock, 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains Input\u003c\/td\u003e\n\u003ctd\u003e1 x Neutrik powerCON-HC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50-60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Power Consumption\u003c\/td\u003e\n\u003ctd\u003e1200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIdle Mode\u003c\/td\u003e\n\u003ctd\u003e80 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby Mode\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 16 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, temperature controlled fans, supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5 °C to +40 °C (+40 °F to +105 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88.1 x 514.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e15.0 kg (33.0 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord IPX10:4 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the IPX10:4 support Dante networked audio?\u003c\/strong\u003e\u003cbr\u003eYes. The IPX10:4 uses OMNEO IP networking, which transports Dante audio with OCA\/AES70 control and provides 8 network audio input channels over redundant PRIMARY\/SECONDARY EtherCON ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive 70V and 100V distributed loudspeaker lines?\u003c\/strong\u003e\u003cbr\u003eYes. Variable Load Drive provides Direct Drive operation at 70 V, 100 V, and 140 V (200 V in bridge mode) without an external step-up transformer, alongside low-impedance 4-ohm and 8-ohm operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat software is used to configure and control the amplifier?\u003c\/strong\u003e\u003cbr\u003eThe IPX10:4 is configured and controlled in IRIS-Net and SONICUE, including DSP setup, impedance measurement, and load monitoring for commissioning and diagnostics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe amplifier is a 2U rack-mount chassis measuring 483 x 88.1 x 514.2 mm and weighing 15.0 kg (33.0 lb), with M6 rack-mount screws included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum output in high-power modes?\u003c\/strong\u003e\u003cbr\u003eIn Parallel-Bridge mode the IPX10:4 delivers up to 10000 W into 4 ohms, with Bridge mode providing 5200 W into 4 ohms for high-SPL applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it maintain audio continuity if a source fails?\u003c\/strong\u003e\u003cbr\u003ePilot tone supervision monitors analog and OMNEO\/Dante inputs and automatically switches to an alternative source selection, supporting announcement and paging reliability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the IPX10:4 fit alongside other Dynacord amplifiers?\u003c\/strong\u003e\u003cbr\u003eIt complements DSP install amplifiers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi DSP power amplifier\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e to compare models.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741653549292,"sku":"IPX10:4","price":10820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/352425.jpg?v=1781712012"},{"product_id":"dynacord-ipx10-8-8-channel-8x1250w-install-power-amplifier","title":"Dynacord IPX10:8 – 8-Channel 8x1250W Install Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord IPX10:8 is an 8-channel, 8 x 1250 W DSP install power amplifier built for high-channel-count networked audio in multi-zone commercial installations. As a rack-mount amplifier with OMNEO IP networking and native Dante connectivity, it lets system designers consolidate eight zones of distributed audio in a single 2U chassis. Variable Load Drive supports low-impedance and 70V\/100V\/140V direct drive on each channel, making it an efficient 8-channel installation amplifier for mixed loudspeaker systems. It is configured and controlled in IRIS-Net and SONICUE for repeatable commercial deployment.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe IPX10:8 delivers eight channels of 1250 W into 4 ohms with a fully integrated 96 kHz DSP engine and FIR Drive technology in a single 2U rack-mount chassis, maximizing channel density per rack unit. Each channel supports Normal, Bridge, Parallel, and Parallel-Bridge modes for low-Z and high-Z distributed audio. Direct Drive provides 70 V, 100 V, and 140 V (200 V in bridge) operation without external transformers, simplifying 70V\/100V line design across many zones. OMNEO transports Dante audio with OCA\/AES70 control over redundant PRIMARY\/SECONDARY EtherCON ports for network resilience. Onboard DSP includes user EQ, speaker EQ, FIR filtering, crossovers, delay, and peak and RMS limiters with thermal modeling per channel, plus a 30-preset speaker pool for fast loudspeaker configuration. Pilot tone supervision and source fallback maintain continuity for paging and announcement systems. Integrators configure and monitor the amplifier in IRIS-Net and SONICUE, with impedance measurement and load monitoring for commissioning and diagnostics. The IPX10:8 is part of the broader \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e and works alongside other DSP install amplifiers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi DSP power amplifier\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 x 1250 W Multichannel Amplification\u003c\/strong\u003e — Delivers 1250 W per channel across eight channels into 4 ohms for high-density multi-zone distributed audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Load Drive (VLD)\u003c\/strong\u003e — Each channel operates in low-impedance or 70V\/100V\/140V direct drive, supporting mixed low-Z and high-Z loudspeaker systems without external transformers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOMNEO IP Networking with Dante\u003c\/strong\u003e — Transports networked audio over Dante with OCA\/AES70 control and redundant PRIMARY\/SECONDARY EtherCON ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 96 kHz DSP and FIR Drive\u003c\/strong\u003e — Native 96 kHz processing provides user EQ, speaker EQ, FIR filtering, crossovers, and delay on all eight channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Preset Speaker Pool\u003c\/strong\u003e — Stored speaker settings speed up configuration of multiple loudspeaker models across zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer-Channel Limiting and Protection\u003c\/strong\u003e — Peak anticipation and RMS\/temperature limiters with thermal modeling protect connected loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot Tone Supervision and Source Fallback\u003c\/strong\u003e — Monitors analog and OMNEO\/Dante inputs and switches to an alternative source for announcement continuity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco Rail High-Efficiency Topology\u003c\/strong\u003e — Class D output with digitally controlled PFC supply reduces operating cost and rack heat load in dense installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eConference rooms and boardrooms\u003c\/li\u003e\n\u003cli\u003eGovernment and commercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eTraining rooms\u003c\/li\u003e\n\u003cli\u003eAuditoriums\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Channels\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Output Power (Normal, all channels driven, 4 ohms)\u003c\/td\u003e\n\u003ctd\u003e1250 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Power (8 ohms)\u003c\/td\u003e\n\u003ctd\u003e1250 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Mode (4 ohms \/ 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e2600 W \/ 2500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParallel-Bridge (4 ohms)\u003c\/td\u003e\n\u003ctd\u003e5000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (70 V \/ 100 V, all channels driven)\u003c\/td\u003e\n\u003ctd\u003e1250 W \/ 1250 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (140 V \/ 200 V bridge)\u003c\/td\u003e\n\u003ctd\u003e2500 W \/ 2500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Voltage (Normal, per channel)\u003c\/td\u003e\n\u003ctd\u003e150 Vpeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Current (Normal, per channel)\u003c\/td\u003e\n\u003ctd\u003e41 Apeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (Low-Z)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB, adjustable 20.0-44.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD (3 dB below max, AES17, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (±0.5 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Factor (20-200 Hz, 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal to Noise Ratio (A-weighted, digital input)\u003c\/td\u003e\n\u003ctd\u003e115 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSP Sampling Rate\u003c\/td\u003e\n\u003ctd\u003e48 kHz \/ 96 kHz, OMNEO\/Dante synchronized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Audio Inputs\u003c\/td\u003e\n\u003ctd\u003e8 channels, OMNEO\/Dante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Type\u003c\/td\u003e\n\u003ctd\u003e2 x Neutrik EtherCON\/RJ45, redundant PRIMARY\/SECONDARY, 1000base-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Input\u003c\/td\u003e\n\u003ctd\u003e4 x 6-pin Euroblock, max +21 dBu, 20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Output\u003c\/td\u003e\n\u003ctd\u003e2 x 8-pin Euroblock, 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains Input\u003c\/td\u003e\n\u003ctd\u003e1 x Neutrik powerCON-HC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50-60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Power Consumption\u003c\/td\u003e\n\u003ctd\u003e1300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIdle Mode\u003c\/td\u003e\n\u003ctd\u003e105 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby Mode\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 18 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, temperature controlled fans, supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5 °C to +40 °C (+40 °F to +105 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88.1 x 514.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e16.8 kg (37.1 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord IPX10:8 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the IPX10:8 support Dante networked audio?\u003c\/strong\u003e\u003cbr\u003eYes. The IPX10:8 uses OMNEO IP networking, which transports Dante audio with OCA\/AES70 control and provides 8 network audio input channels over redundant PRIMARY\/SECONDARY EtherCON ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many zones can one IPX10:8 drive?\u003c\/strong\u003e\u003cbr\u003eThe amplifier provides eight independent 1250 W channels, allowing a single 2U unit to drive up to eight loudspeaker zones with per-channel DSP and Variable Load Drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive 70V and 100V distributed loudspeaker lines?\u003c\/strong\u003e\u003cbr\u003eYes. Variable Load Drive provides Direct Drive operation at 70 V, 100 V, and 140 V (200 V in bridge mode) without an external step-up transformer, alongside low-impedance 4-ohm and 8-ohm operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat software is used to configure and control the amplifier?\u003c\/strong\u003e\u003cbr\u003eThe IPX10:8 is configured and controlled in IRIS-Net and SONICUE, including DSP setup, the 30-preset speaker pool, impedance measurement, and load monitoring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe amplifier is a 2U rack-mount chassis measuring 483 x 88.1 x 514.2 mm and weighing 16.8 kg (37.1 lb), with M6 rack-mount screws included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it maintain audio continuity if a source fails?\u003c\/strong\u003e\u003cbr\u003ePilot tone supervision monitors analog and OMNEO\/Dante inputs and automatically switches to an alternative source selection, supporting announcement and paging reliability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the IPX10:8 fit alongside other Dynacord amplifiers?\u003c\/strong\u003e\u003cbr\u003eIt complements DSP install amplifiers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi DSP power amplifier\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e to compare models.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741653614828,"sku":"IPX10:8","price":12369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/352420.jpg?v=1781712016"},{"product_id":"dynacord-ipx20-4-4-channel-4x5000w-install-power-amplifier","title":"Dynacord IPX20:4 – 4-Channel 4x5000W Install Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord IPX20:4 is a 4-channel, 4 x 5000 W DSP install power amplifier built for the highest-output networked audio in large-scale commercial installations. As a rack-mount amplifier with OMNEO IP networking and native Dante connectivity, it gives system designers substantial headroom for distributed audio in auditoriums and high-SPL venues. Variable Load Drive supports low-impedance and 70V\/100V\/140V direct drive on each channel, making it a high-power 4-channel installation amplifier for mixed loudspeaker systems. It is configured and controlled in IRIS-Net and SONICUE for repeatable commercial deployment.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe IPX20:4 delivers four channels of 5000 W into 4 ohms with a fully integrated 96 kHz DSP engine and FIR Drive technology in a single 2U rack-mount chassis, providing exceptional power density for demanding install applications. Each channel supports Normal and Parallel modes for low-Z and high-Z distributed audio, with Parallel mode reaching 10000 W into 2 ohms for high-SPL zones and subwoofers. Direct Drive provides 70 V, 100 V, and 140 V operation without external transformers, simplifying 70V\/100V line design in large venues. OMNEO transports Dante audio with OCA\/AES70 control over redundant PRIMARY\/SECONDARY EtherCON ports for network resilience. Onboard DSP includes user EQ, speaker EQ, FIR filtering, crossovers, delay, and peak and RMS limiters with thermal modeling per channel, plus a 30-preset speaker pool. Pilot tone supervision and source fallback maintain continuity for paging and announcement systems. Integrators configure and monitor the amplifier in IRIS-Net and SONICUE, with impedance measurement and load monitoring for commissioning and diagnostics. The IPX20:4 is part of the broader \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e and complements other DSP install amplifiers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi DSP power amplifier\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 5000 W Multichannel Amplification\u003c\/strong\u003e — Delivers 5000 W per channel into 4 ohms for the highest-output distributed audio in large commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Load Drive (VLD)\u003c\/strong\u003e — Each channel operates in low-impedance or 70V\/100V\/140V direct drive, supporting mixed low-Z and high-Z loudspeaker systems without external transformers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Power Parallel Mode\u003c\/strong\u003e — Parallel mode reaches 10000 W into 2 ohms for high-SPL zones and subwoofer applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOMNEO IP Networking with Dante\u003c\/strong\u003e — Transports networked audio over Dante with OCA\/AES70 control and redundant PRIMARY\/SECONDARY EtherCON ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 96 kHz DSP and FIR Drive\u003c\/strong\u003e — Native 96 kHz processing provides user EQ, speaker EQ, FIR filtering, crossovers, and delay per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Preset Speaker Pool\u003c\/strong\u003e — Stored speaker settings speed up configuration of multiple loudspeaker models across zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer-Channel Limiting and Protection\u003c\/strong\u003e — Peak anticipation and RMS\/temperature limiters with thermal modeling protect connected loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco Rail High-Efficiency Topology\u003c\/strong\u003e — Class D output with digitally controlled PFC supply manages operating cost and rack heat load at high output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAuditoriums\u003c\/li\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eAll-hands rooms\u003c\/li\u003e\n\u003cli\u003eGovernment and commercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eBroadcast studios\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Channels\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Output Power (Normal, all channels driven, 4 ohms)\u003c\/td\u003e\n\u003ctd\u003e5000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Power (2 ohms \/ 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e5200 W \/ 2500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParallel Mode (2 ohms \/ 4 ohms)\u003c\/td\u003e\n\u003ctd\u003e10000 W \/ 8000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (70 V \/ 100 V \/ 140 V)\u003c\/td\u003e\n\u003ctd\u003e3550 W \/ 5000 W \/ 5000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Voltage (Normal, per channel)\u003c\/td\u003e\n\u003ctd\u003e210 Vpeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Current (Normal, per channel)\u003c\/td\u003e\n\u003ctd\u003e84 Apeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (Low-Z)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB, adjustable 20.0-44.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD (3 dB below max, AES17, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (±1.0 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Factor (20-200 Hz, 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal to Noise Ratio (A-weighted, analog \/ digital input)\u003c\/td\u003e\n\u003ctd\u003e115 dB \/ 118 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSP Sampling Rate\u003c\/td\u003e\n\u003ctd\u003e48 kHz \/ 96 kHz, OMNEO\/Dante synchronized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Audio Inputs\u003c\/td\u003e\n\u003ctd\u003e8 channels, OMNEO\/Dante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Type\u003c\/td\u003e\n\u003ctd\u003e2 x Neutrik EtherCON\/RJ45, redundant PRIMARY\/SECONDARY, 1000base-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Input\u003c\/td\u003e\n\u003ctd\u003e2 x 6-pin Euroblock, max +21 dBu, 20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Output\u003c\/td\u003e\n\u003ctd\u003e1 x 8-pin Euroblock, 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains Input\u003c\/td\u003e\n\u003ctd\u003e1 x Neutrik powerCON-HC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50-60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Power Consumption\u003c\/td\u003e\n\u003ctd\u003e2250 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIdle Mode\u003c\/td\u003e\n\u003ctd\u003e110 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby Mode\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 19 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, temperature controlled fans, supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5 °C to +40 °C (+40 °F to +105 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88.1 x 514.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e18.3 kg (40.3 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord IPX20:4 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the IPX20:4 support Dante networked audio?\u003c\/strong\u003e\u003cbr\u003eYes. The IPX20:4 uses OMNEO IP networking, which transports Dante audio with OCA\/AES70 control and provides 8 network audio input channels over redundant PRIMARY\/SECONDARY EtherCON ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive 70V and 100V distributed loudspeaker lines?\u003c\/strong\u003e\u003cbr\u003eYes. Variable Load Drive provides Direct Drive operation at 70 V, 100 V, and 140 V without an external step-up transformer, alongside low-impedance 4-ohm, 2-ohm, and 8-ohm operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum output power?\u003c\/strong\u003e\u003cbr\u003eEach channel delivers 5000 W into 4 ohms in Normal mode, and Parallel mode reaches 10000 W into 2 ohms for high-SPL and subwoofer applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat software is used to configure and control the amplifier?\u003c\/strong\u003e\u003cbr\u003eThe IPX20:4 is configured and controlled in IRIS-Net and SONICUE, including DSP setup, the 30-preset speaker pool, impedance measurement, and load monitoring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe amplifier is a 2U rack-mount chassis measuring 483 x 88.1 x 514.2 mm and weighing 18.3 kg (40.3 lb), with M6 rack-mount screws included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it maintain audio continuity if a source fails?\u003c\/strong\u003e\u003cbr\u003ePilot tone supervision monitors analog and OMNEO\/Dante inputs and automatically switches to an alternative source selection, supporting announcement and paging reliability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the IPX20:4 fit alongside other Dynacord amplifiers?\u003c\/strong\u003e\u003cbr\u003eIt complements DSP install amplifiers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi DSP power amplifier\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e to compare models.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741653713132,"sku":"IPX20:4","price":15313.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/352435.jpg?v=1781712021"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/collections\/dynacord-logo_b45ba86b-adac-4a67-a99b-a3bda47f3df7.png?v=1753120091","url":"https:\/\/creationnetworks.net\/collections\/dynacord.oembed?page=2","provider":"Creation Networks","version":"1.0","type":"link"}