{"title":"Audio-Technica Antenna \u0026 RF Distribution","description":"\u003cp\u003eRemote antenna kits, antenna cables, distribution and RF accessories for Audio-Technica wireless microphone systems, covering the 470–608 MHz bands.\u003c\/p\u003e\n\n\u003ch2\u003eAntennas decide range, not transmitter power\u003c\/h2\u003e\u003cp\u003eThe single most common cause of dropouts in an installed wireless system is a receiver racked in a closet with its stock antennas still attached. Remote antenna kits put the antennas in the room with line of sight to the transmitters, which is what actually determines usable range.\u003c\/p\u003e\n\u003cp\u003eMatch the kit to the frequency band of the system — 470–530, 500–570 and 530–608 MHz kits are not interchangeable. Cable length matters too: every run introduces loss, and beyond a certain distance an inline amplifier is required rather than optional.\u003c\/p\u003e\n\n\u003cp\u003eCreation Networks designs RF distribution as part of the system rather than as an accessory, including antenna placement and cable loss calculation. Call 888-230-3661 or email sales@creationnetworks.net.\u003c\/p\u003e","products":[{"product_id":"audio-technica-atw-a410p-uhf-powered-wideband-antenna-470-to-990-mhz","title":"Audio-Technica ATW-A410P UHF Powered Wideband Antenna (470 to 990 MHz)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Audio-Technica ATW-A410P UHF powered wideband antenna is engineered for AV integrators improving wireless microphone reception across permanent installations. Covering a wide 470 to 990 MHz range, this low-profile UHF antenna mounts cleanly to a wall or ceiling and includes a switchable amplifier to compensate for cable loss. It is a sound choice for facilities deploying a remote antenna for wireless microphones in larger rooms. The design balances discreet aesthetics with the gain control needed for reliable RF performance.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-atw-a410p-uhf-powered-wideband-antenna-470-to-990-mhz-creation-networks-73636.png?v=1757889819\" alt=\"Audio-Technica ATW-A410P UHF Powered Wideband Antenna 470 to 990 MHz\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe ATW-A410P is a low-profile UHF antenna designed to mount unobtrusively on a wall or ceiling, making it well suited to boardrooms, auditoriums, and houses of worship where appearance matters. It operates across a 470 to 990 MHz range, giving integrators broad compatibility with wideband UHF wireless microphone systems. A 4-position switchable amplifier provides -10 dB, 0 dB, +6 dB, or +12 dB of gain, allowing technicians to compensate for losses introduced by long antenna cable runs.\u003c\/p\u003e\n\u003cp\u003eAn LED indicator displays the current gain setting, simplifying setup and confirmation during commissioning. To accommodate a range of installation environments, the antenna's BNC cable can be configured to exit from the top, side, or rear of the housing, which helps with clean cable management behind walls or above ceilings. The antenna ships with a mounting bracket and four screws for straightforward installation. The amplifier requires +12V DC bias power, supplied by a compatible receiver or antenna distribution system. Integrators planning a remote antenna deployment can review compatible wireless components and distribution gear at \u003ca href=\"https:\/\/creationnetworks.net\/search?q=ATW-A410P\"\u003eCreation Networks\u003c\/a\u003e. Positioned correctly, the ATW-A410P helps extend usable range and improve reception consistency for UHF wireless microphones.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Mounting\u003c\/strong\u003e — Mounts discreetly to a wall or ceiling for clean integration in finished spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide UHF Range\u003c\/strong\u003e — Operates across 470 to 990 MHz for broad compatibility with wideband UHF wireless systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Position Gain Selector\u003c\/strong\u003e — Offers -10 dB, 0 dB, +6 dB, and +12 dB settings to compensate for cable loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Gain Indicator\u003c\/strong\u003e — A built-in LED displays the current gain setting for fast confirmation during setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Cable Routing\u003c\/strong\u003e — The BNC cable can exit from the top, side, or rear of the antenna for tidy installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mounting Hardware\u003c\/strong\u003e — Ships with a mounting bracket and four screws for straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBoardrooms requiring discreet, ceiling-mounted antennas\u003c\/li\u003e\n\u003cli\u003eAuditoriums extending wireless microphone coverage\u003c\/li\u003e\n\u003cli\u003eHouses of worship with large platform areas\u003c\/li\u003e\n\u003cli\u003eConference rooms and multi-purpose rooms with long cable runs\u003c\/li\u003e\n\u003cli\u003eGovernment and commercial meeting spaces needing reliable RF reception\u003c\/li\u003e\n\u003cli\u003eBroadcast studios deploying remote UHF antennas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:320px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470 to 990 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC-J\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Requirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+12V DC, 60 mA or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOIP3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;30 dBm typical (within specified bandwidth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-10 dB \/ 0 dB \/ +6 dB \/ +12 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-10°C to 50°C (14°F to 122°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (without bracket)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e175 mm (6.9\") W x 175 mm (6.9\") D x 50 mm (2.0\") H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (without bracket)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e390 g (13.8 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAccessories\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting bracket, screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Audio-Technica (audio-technica.com).\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat frequency range does the ATW-A410P cover?\u003c\/h3\u003e\n\u003cp\u003eThe antenna operates across a wide 470 to 990 MHz range, making it compatible with most wideband UHF wireless microphone systems within that band.\u003c\/p\u003e\n\u003ch3\u003eWhy does the antenna have a switchable amplifier?\u003c\/h3\u003e\n\u003cp\u003eThe 4-position gain selector (-10 dB, 0 dB, +6 dB, +12 dB) lets technicians compensate for signal loss introduced by long antenna cable runs, helping maintain reliable reception.\u003c\/p\u003e\n\u003ch3\u003eHow does the antenna receive power?\u003c\/h3\u003e\n\u003cp\u003eThe amplifier requires +12V DC bias power at 60 mA or less, typically supplied through the coaxial cable by a compatible receiver or antenna distribution system.\u003c\/p\u003e\n\u003ch3\u003eHow does it integrate into an AV system?\u003c\/h3\u003e\n\u003cp\u003eThe ATW-A410P connects via a BNC-J connector with 50-ohm impedance and is intended to feed a compatible UHF receiver or antenna distributor. The cable can exit from the top, side, or rear for clean routing within walls or ceilings.\u003c\/p\u003e\n\u003ch3\u003eWhat is included for installation?\u003c\/h3\u003e\n\u003cp\u003eEach antenna ships with a mounting bracket and four screws, and the low-profile housing is designed to mount discreetly on a wall or ceiling.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty and support are available?\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine Audio-Technica product covered by the manufacturer's standard warranty. For warranty details or help specifying a compatible RF distribution system, contact the Creation Networks team.\u003c\/p\u003e","brand":"Audio-Technica","offers":[{"title":"Default Title","offer_id":42390887039212,"sku":"ATW-A410P","price":439.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-atw-a410p-uhf-powered-wideband-antenna-470-to-990-mhz-creation-networks-73636.png?v=1757889819"},{"product_id":"audio-technica-2-ch-kit-470t530-2-channel-remote-1-2-wave-antenna-kit-for-wireless-microphones-470-530-mhz","title":"Audio-Technica 2-CH KIT 470T530 2 Channel Remote 1\/2  Wave Antenna Kit for Wireless Microphones 470-530 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Audio-Technica 2-CH KIT 470T530 is a 2-channel remote 1\/2-wave antenna kit designed to improve UHF reception for wireless microphone systems operating in the 470 to 530 MHz range. Built for smaller installations, AV media carts, training rooms, and meeting spaces, this remote antenna kit for wireless microphones provides everything needed to relocate antennas away from the rack and reduce signal dropouts. It is a practical solution for integrators specifying a two-channel antenna distribution kit. The kit supports both front-panel and remote mounting for flexible deployment.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-2-ch-kit-470t530-2-channel-remote-12-wave-antenna-kit-for-wireless-microphones-470-530-mhz-creation-networks-98979.png?v=1757903205\" alt=\"Audio-Technica 2-CH KIT 470T530 2-Channel Remote 1\/2-Wave Antenna Kit 470-530 MHz\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 2-channel antenna kit is intended to improve UHF reception for wireless microphone systems by allowing antennas to be mounted remotely or to the front of an equipment rack. Relocating antennas away from metal rack enclosures and toward the coverage area is a common technique for reducing dropouts, and this kit packages the components required to do so. It is well suited to smaller installations such as classrooms, training rooms, and commercial meeting spaces where a clean, reliable RF path is needed.\u003c\/p\u003e\n\u003cp\u003eThe kit provides two 1\/2-wave antennas with BNC pass-through connectors for front-panel mounting, along with bracket hardware for remote mounting on a wall or surface. Six 2-foot coaxial cables are included to connect the antennas to the supplied pair of 2-way splitters and on to any compatible UHF receiver with removable antennas operating in the 470 to 530 MHz band. Because the kit distributes a shared antenna pair across two receiver channels, it helps reduce antenna clutter while supporting consistent reception. Integrators planning a wireless deployment can review compatible receivers and RF distribution components at \u003ca href=\"https:\/\/creationnetworks.net\/search?q=2-CH+KIT+470T530\"\u003eCreation Networks\u003c\/a\u003e. The result is a straightforward, rack-friendly approach to improving wireless microphone reliability in the 470 to 530 MHz range.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e470 to 530 MHz Coverage\u003c\/strong\u003e — Matched to wireless microphone systems operating within the 470 to 530 MHz UHF band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 1\/2-Wave Antennas\u003c\/strong\u003e — Includes a pair of 1\/2-wave antennas for improved reception over standard receiver-mounted whips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Mounting\u003c\/strong\u003e — BNC pass-through connectors allow the antennas to mount to the front of an equipment rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Mounting Hardware\u003c\/strong\u003e — Included bracket hardware supports mounting antennas remotely on a wall or surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Cabling\u003c\/strong\u003e — Six 2-foot coaxial cables connect the antennas to the splitters and receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Splitters\u003c\/strong\u003e — A pair of 2-way splitters distributes the antenna pair across two receiver channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver Compatibility\u003c\/strong\u003e — Works with any compatible UHF receiver that has removable antennas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTraining rooms running two-channel wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eConference rooms and huddle rooms with rack-mounted receivers\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces needing reduced dropouts\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms with antennas mounted toward the coverage area\u003c\/li\u003e\n\u003cli\u003eHouse of worship spaces using two wireless channels\u003c\/li\u003e\n\u003cli\u003eGovernment and commercial AV carts requiring portable RF distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:320px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470 to 530 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannels Supported\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntennas\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo 1\/2-wave antennas with BNC pass-through connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSplitters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo 2-way splitters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoaxial Cables\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSix 2-foot coaxial cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFront-panel (BNC pass-through) or remote (bracket hardware included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReceiver Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCompatible UHF receivers with removable antennas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Audio-Technica (audio-technica.com).\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat frequency range does this kit support?\u003c\/h3\u003e\n\u003cp\u003eThe 2-CH KIT 470T530 is matched to wireless microphone systems operating in the 470 to 530 MHz UHF band. Confirm that your receivers fall within this range before specifying the kit.\u003c\/p\u003e\n\u003ch3\u003eHow many channels does the kit support?\u003c\/h3\u003e\n\u003cp\u003eThe kit supports two channels by distributing a shared pair of antennas across two receivers using the included pair of 2-way splitters.\u003c\/p\u003e\n\u003ch3\u003eHow are the antennas mounted?\u003c\/h3\u003e\n\u003cp\u003eThe antennas can be mounted to the front of an equipment rack using the included BNC pass-through connectors, or remotely on a wall or surface using the supplied bracket hardware.\u003c\/p\u003e\n\u003ch3\u003eWhat is included for cabling?\u003c\/h3\u003e\n\u003cp\u003eSix 2-foot coaxial cables are provided to connect the two antennas to the pair of 2-way splitters and on to your receivers.\u003c\/p\u003e\n\u003ch3\u003eWhich receivers is the kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe kit works with any compatible UHF receiver that has removable antennas and operates within the 470 to 530 MHz range. Contact our team if you need help confirming compatibility with your system.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty and support are available?\u003c\/h3\u003e\n\u003cp\u003eThis product is supplied through Audio-Technica and covered by the applicable manufacturer warranty. For warranty details or AV system integration guidance, contact the Creation Networks team.\u003c\/p\u003e","brand":"Audio-Technica","offers":[{"title":"Default Title","offer_id":43410358567148,"sku":"2-CH KIT 470T530","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-2-ch-kit-470t530-2-channel-remote-12-wave-antenna-kit-for-wireless-microphones-470-530-mhz-creation-networks-98979.png?v=1757903205"},{"product_id":"audio-technica-2-ch-kit-500t570-2-channel-remote-1-2-wave-antenna-kit-for-wireless-microphones-500-570-mhz","title":"Audio-Technica 2-CH KIT 500T570 2 Channel Remote 1\/2  Wave Antenna Kit for Wireless Microphones 500-570 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Audio-Technica 2-CH KIT 500T570 is a 2-channel remote 1\/2-wave antenna kit designed to improve UHF reception for wireless microphone systems operating in the 500 to 570 MHz range. Built for smaller installations, AV media carts, training rooms, and meeting spaces, this remote antenna kit for wireless microphones provides everything needed to relocate antennas away from the rack and reduce signal dropouts. It is a practical solution for integrators specifying a two-channel antenna distribution kit. The kit supports both front-panel and remote mounting for flexible deployment.\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-2-ch-kit-500t570-2-channel-remote-12-wave-antenna-kit-for-wireless-microphones-500-570-mhz-creation-networks-66256.png?v=1757903206\" alt=\"Audio-Technica 2-CH KIT 500T570 2-Channel Remote 1\/2-Wave Antenna Kit 500-570 MHz\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis 2-channel antenna kit is intended to improve UHF reception for wireless microphone systems by allowing antennas to be mounted remotely or to the front of an equipment rack. Relocating antennas away from metal rack enclosures and toward the coverage area is a common technique for reducing dropouts, and this kit packages the components required to do so. It is well suited to smaller installations such as classrooms, training rooms, and commercial meeting spaces where a clean, reliable RF path is needed.\u003c\/p\u003e\n\u003cp\u003eThe kit provides two 1\/2-wave antennas with BNC pass-through connectors for front-panel mounting, along with bracket hardware for remote mounting on a wall or surface. Six 2-foot coaxial cables are included to connect the antennas to the supplied pair of 2-way splitters and on to any compatible UHF receiver with removable antennas operating in the 500 to 570 MHz band. Because the kit distributes a shared antenna pair across two receiver channels, it helps reduce antenna clutter while supporting consistent reception. Integrators planning a wireless deployment can review compatible receivers and RF distribution components at \u003ca href=\"https:\/\/creationnetworks.net\/search?q=2-CH+KIT+500T570\"\u003eCreation Networks\u003c\/a\u003e. The result is a straightforward, rack-friendly approach to improving wireless microphone reliability in the 500 to 570 MHz range.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 to 570 MHz Coverage\u003c\/strong\u003e — Matched to wireless microphone systems operating within the 500 to 570 MHz UHF band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 1\/2-Wave Antennas\u003c\/strong\u003e — Includes a pair of 1\/2-wave antennas for improved reception over standard receiver-mounted whips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Mounting\u003c\/strong\u003e — BNC pass-through connectors allow the antennas to mount to the front of an equipment rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Mounting Hardware\u003c\/strong\u003e — Included bracket hardware supports mounting antennas remotely on a wall or surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Cabling\u003c\/strong\u003e — Six 2-foot coaxial cables connect the antennas to the splitters and receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Splitters\u003c\/strong\u003e — A pair of 2-way splitters distributes the antenna pair across two receiver channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver Compatibility\u003c\/strong\u003e — Works with any compatible UHF receiver that has removable antennas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTraining rooms running two-channel wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eConference rooms and huddle rooms with rack-mounted receivers\u003c\/li\u003e\n\u003cli\u003eCommercial meeting spaces needing reduced dropouts\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms with antennas mounted toward the coverage area\u003c\/li\u003e\n\u003cli\u003eHouse of worship spaces using two wireless channels\u003c\/li\u003e\n\u003cli\u003eGovernment and commercial AV carts requiring portable RF distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:320px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 to 570 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannels Supported\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntennas\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo 1\/2-wave antennas with BNC pass-through connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSplitters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo 2-way splitters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoaxial Cables\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSix 2-foot coaxial cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFront-panel (BNC pass-through) or remote (bracket hardware included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReceiver Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCompatible UHF receivers with removable antennas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Audio-Technica (audio-technica.com).\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat frequency range does this kit support?\u003c\/h3\u003e\n\u003cp\u003eThe 2-CH KIT 500T570 is matched to wireless microphone systems operating in the 500 to 570 MHz UHF band. Confirm that your receivers fall within this range before specifying the kit.\u003c\/p\u003e\n\u003ch3\u003eHow many channels does the kit support?\u003c\/h3\u003e\n\u003cp\u003eThe kit supports two channels by distributing a shared pair of antennas across two receivers using the included pair of 2-way splitters.\u003c\/p\u003e\n\u003ch3\u003eHow are the antennas mounted?\u003c\/h3\u003e\n\u003cp\u003eThe antennas can be mounted to the front of an equipment rack using the included BNC pass-through connectors, or remotely on a wall or surface using the supplied bracket hardware.\u003c\/p\u003e\n\u003ch3\u003eWhat is included for cabling?\u003c\/h3\u003e\n\u003cp\u003eSix 2-foot coaxial cables are provided to connect the two antennas to the pair of 2-way splitters and on to your receivers.\u003c\/p\u003e\n\u003ch3\u003eWhich receivers is the kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe kit works with any compatible UHF receiver that has removable antennas and operates within the 500 to 570 MHz range. Contact our team if you need help confirming compatibility with your system.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty and support are available?\u003c\/h3\u003e\n\u003cp\u003eThis product is supplied through Audio-Technica and covered by the applicable manufacturer warranty. For warranty details or AV system integration guidance, contact the Creation Networks team.\u003c\/p\u003e","brand":"Audio-Technica","offers":[{"title":"Default Title","offer_id":43410358599916,"sku":"2-CH KIT 500T570","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-2-ch-kit-500t570-2-channel-remote-12-wave-antenna-kit-for-wireless-microphones-500-570-mhz-creation-networks-66256.png?v=1757903206"},{"product_id":"audio-technica-2-ch-kit-530t608-2-channel-remote-1-2-wave-antenna-kit-for-wireless-microphones-530-608-mhz","title":"Audio-Technica 2-CH KIT 530T608 2 Channel Remote 1\/2  Wave Antenna Kit for Wireless Microphones 530-608 MHz","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Audio-Technica 2-CH KIT 530T608 2-channel remote antenna kit is a UHF antenna distribution solution for wireless microphone systems operating in the 530-608 MHz range. This remote antenna kit for wireless microphones improves RF reception and reduces dropouts in commercial AV installations, making it well suited to conference rooms, classrooms, and house of worship deployments. The kit provides two 1\/2-wave antennas, splitters, mounting hardware, and coaxial cabling for either front-of-rack or remote antenna placement. It is a practical UHF antenna kit for two-receiver wireless microphone setups in fixed and portable systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-2-ch-kit-530t608-2-channel-remote-12-wave-antenna-kit-for-wireless-microphones-530-608-mhz-creation-networks-52863.png?v=1757903207\" alt=\"Audio-Technica 2-CH KIT 530T608 2-Channel Remote 1\/2-Wave Antenna Kit for Wireless Microphones\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eDesigned for smaller installations, AV media carts, classrooms, and meeting spaces, this kit contains everything needed to mount antennas remotely or to the front of your equipment rack, helping to reduce dropouts in your wireless microphone signal. The kit provides two 1\/2-wave antennas with BNC pass-through connectors for front-panel mounting, along with bracket hardware for remote mounting. Six 2-foot coaxial cables connect the antennas to the included pair of 2-way splitters and to any compatible UHF receiver with removable antennas. Relocating antennas away from a crowded rack and toward the coverage area is a proven method for improving line-of-sight reception and overall RF stability. The kit operates within the 530-608 MHz band, so verify that your receivers tune within this range before integration. For broader system planning, our team can help you pair this antenna kit with compatible receivers and microphones. Explore related options at \u003ca href=\"https:\/\/creationnetworks.net\/search?q=530T608\"\u003eCreation Networks\u003c\/a\u003e to complete your wireless infrastructure. Proper antenna placement is one of the most cost-effective ways to extend reliable wireless microphone range in commercial spaces.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Distribution\u003c\/strong\u003e — Supports two wireless microphone receiver channels from a single shared antenna pair, reducing antenna clutter at the rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/2-Wave Antennas\u003c\/strong\u003e — Includes two 1\/2-wave antennas tuned for the 530-608 MHz UHF range used by many wireless microphone systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront or Remote Mounting\u003c\/strong\u003e — BNC pass-through connectors allow front-panel mounting, while included bracket hardware supports remote antenna placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Coaxial Cabling\u003c\/strong\u003e — Six 2-foot coaxial cables connect the antennas to the splitters and receivers for a complete, ready-to-install package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Splitters\u003c\/strong\u003e — A pair of 2-way splitters distributes the antenna signal to compatible UHF receivers with removable antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDropout Reduction\u003c\/strong\u003e — Remote antenna placement improves line-of-sight reception and helps reduce wireless signal dropouts in challenging environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room wireless microphone systems\u003c\/li\u003e\n\u003cli\u003eHouse of worship audio installations\u003c\/li\u003e\n\u003cli\u003eTraining room and classroom presentation audio\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room wireless coverage\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space AV racks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:320px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency Range\u003c\/th\u003e\n\u003ctd\u003e530 - 608 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChannels Supported\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAntennas\u003c\/th\u003e\n\u003ctd\u003eTwo 1\/2-wave antennas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSplitters\u003c\/th\u003e\n\u003ctd\u003eTwo 2-way splitters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoaxial Cables\u003c\/th\u003e\n\u003ctd\u003eSix 2-foot cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAntenna Connectors\u003c\/th\u003e\n\u003ctd\u003eBNC pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eFront-panel or remote (bracket hardware included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Audio-Technica (audio-technica.com).\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhich wireless microphone systems is this antenna kit compatible with?\u003c\/h3\u003e\u003cp\u003eThe kit is designed for UHF wireless microphone receivers that tune within the 530-608 MHz band and use removable antennas with standard connectors. Confirm your receiver's frequency range and antenna connector type before integration.\u003c\/p\u003e\u003ch3\u003eHow does this kit improve wireless reception?\u003c\/h3\u003e\u003cp\u003eBy relocating the antennas away from a crowded rack and closer to the coverage area, the kit improves line-of-sight reception and helps reduce dropouts. Two-way splitters then distribute the signal to two receiver channels.\u003c\/p\u003e\u003ch3\u003eCan the antennas be mounted on the front of an equipment rack?\u003c\/h3\u003e\u003cp\u003eYes. The included BNC pass-through connectors allow front-panel mounting, and bracket hardware is provided for remote mounting away from the rack.\u003c\/p\u003e\u003ch3\u003eHow many receivers does the kit support?\u003c\/h3\u003e\u003cp\u003eThe kit supports two wireless microphone receiver channels using the pair of included 2-way splitters and 1\/2-wave antennas.\u003c\/p\u003e\u003ch3\u003eIs any additional cabling required for installation?\u003c\/h3\u003e\u003cp\u003eThe kit includes six 2-foot coaxial cables to connect the antennas, splitters, and receivers. Longer remote runs may require additional low-loss coaxial cable, which our team can specify.\u003c\/p\u003e\u003ch3\u003eDoes this kit include a warranty, and where can I get support?\u003c\/h3\u003e\u003cp\u003eThe kit is covered by the manufacturer's standard warranty. Creation Networks provides product support and system integration guidance to help you specify and install the kit correctly.\u003c\/p\u003e","brand":"Audio-Technica","offers":[{"title":"Default Title","offer_id":43410358632684,"sku":"2-CH KIT 530T608","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-2-ch-kit-530t608-2-channel-remote-12-wave-antenna-kit-for-wireless-microphones-530-608-mhz-creation-networks-52863.png?v=1757903207"},{"product_id":"audio-technica-atw-bh1-antenna-bulkhead-connector-kit-includes-bnc-bnc-bulkhead-type-connectors-with-mounting-hardware-and-cables","title":"Audio-Technica ATW-BH1 Antenna bulkhead connector kit includes BNC-BNC bulkhead-type connectors with mounting hardware and cables","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Audio-Technica ATW-BH1 antenna bulkhead connector kit lets integrators remotely mount wireless receiver antennas to the front of an equipment rack. The kit pairs two BNC-terminated bulkhead connectors with two 3-foot RG-58 BNC-to-BNC cables and the mounting hardware needed for a clean rack installation. It works with any wireless microphone receiver that uses BNC antenna connections. The result is improved RF reception and a tidier rack layout for fixed and portable systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe ATW-BH1 antenna bulkhead connector kit solves a common problem in rack-mounted wireless audio: receiver antennas tucked behind a closed rack rarely capture a strong, clean RF signal. By relocating the antennas to the front bulkhead, this kit gives line-of-sight reception while keeping cabling organized.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-atw-bh1-antenna-bulkhead-connector-kit-includes-bnc-bnc-bulkhead-type-connectors-with-mounting-hardware-and-cables-creation-networks-74500.jpg?v=1757903607\" alt=\"Audio-Technica ATW-BH1 antenna bulkhead connector kit with BNC-BNC connectors and cables\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe kit includes two BNC bulkhead connectors that mount through a rack panel, along with two 3-foot RG-58 BNC-to-BNC jumper cables to link the bulkhead to the receiver. Because the connectors are a standard BNC type, the ATW-BH1 antenna bulkhead kit is compatible with virtually any receiver featuring BNC antenna inputs, not only Audio-Technica models. This makes it a practical accessory for system integrators standardizing antenna mounting across mixed equipment racks. For installers building multi-channel wireless setups, front-panel antenna placement also simplifies adding antenna distribution later. You can review compatible wireless components in our catalog at \u003ca href=\"https:\/\/creationnetworks.net\/search?q=ATW-BH1\"\u003eCreation Networks\u003c\/a\u003e. Each kit ships with the mounting hardware required to complete a front-of-rack antenna installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-of-Rack Antenna Mounting\u003c\/strong\u003e — Relocates wireless receiver antennas to the front bulkhead for improved line-of-sight RF reception.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Bulkhead Connectors\u003c\/strong\u003e — Includes two BNC-terminated bulkhead connectors that mount cleanly through a rack panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRG-58 Jumper Cables\u003c\/strong\u003e — Supplies two 3-foot RG-58 BNC-to-BNC cables to connect the bulkhead to the receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal BNC Compatibility\u003c\/strong\u003e — Works with any wireless microphone receiver that uses standard BNC antenna connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware Included\u003c\/strong\u003e — Ships with the hardware needed to complete a front-panel antenna installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:320px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC bulkhead connectors (two included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCables Included\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo 3-foot RG-58 BNC-to-BNC cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFront-of-rack bulkhead, hardware included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWireless receivers with BNC antenna connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Audio-Technica (audio-technica.com).\u003c\/p\u003e","brand":"Audio-Technica","offers":[{"title":"Default Title","offer_id":43410375213292,"sku":"ATW-BH1","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/products\/audio-technica-atw-bh1-antenna-bulkhead-connector-kit-includes-bnc-bnc-bulkhead-type-connectors-with-mounting-hardware-and-cables-creation-networks-74500.jpg?v=1757903607"},{"product_id":"audio-technica-rf-venue-half-wave-antenna-kit-470-to-530-mhz-1-2-wave-470t530","title":"Audio-Technica RF Venue Half-Wave Antenna Kit (470 to 530 MHz) - 1\/2-WAVE 470T530","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe RF Venue Half-Wave Antenna Kit (470 to 530 MHz), distributed by Audio-Technica, upgrades the stock 1\/4-wave whip antennas on many UHF wireless receivers to a pair of front- or remote-mounted 1\/2-wave antennas. Improving antenna placement and gain helps extend reception range and reduce dropouts across the 470 to 530 MHz band. The kit ships with two antennas, BNC pass-through connectors for front-panel mounting, and hardware for remote installation. It is a practical RF performance upgrade for sound reinforcement and installed wireless microphone systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-half-wave-antenna-kit-470-to-530-mhz-12-wave-470t530-creation-networks-54435.jpg?v=1757936203\" alt=\"Audio-Technica RF Venue Half-Wave Antenna Kit 470 to 530 MHz 1\/2-WAVE 470T530\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eMany wireless microphone receivers ship with rear-mounted 1\/4-wave whip antennas that sit behind rack gear, where metal and obstructions degrade signal reception. This half-wave antenna kit addresses that limitation by relocating a pair of higher-gain 1\/2-wave antennas to the front panel or to a remote position with clear line of sight to the transmitters. The result is a stronger, more consistent RF link and fewer audio interruptions during live events, presentations, and houses of worship. The included BNC pass-through connectors allow front mounting on receivers with BNC antenna inputs, while the supplied hardware supports remote mounting on a wall, mic stand, or truss.\u003c\/p\u003e\u003cp\u003eThis 470 to 530 MHz kit covers a UHF segment used by a wide range of wireless systems, making it a versatile reception upgrade for existing inventory. For broader RF infrastructure planning, compare related antenna kits and accessories at our \u003ca href=\"https:\/\/creationnetworks.net\/search?q=1%2F2-WAVE%20470T530\"\u003eRF Venue half-wave antenna kit\u003c\/a\u003e listing. The kit is intended to pair with diversity receivers that use two antenna inputs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Wireless Performance\u003c\/strong\u003e — Upgrading from 1\/4-wave whips to a pair of 1\/2-wave antennas helps extend operating range and reduce dropouts in UHF wireless systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e470 to 530 MHz Coverage\u003c\/strong\u003e — The antennas are tuned for the 470 to 530 MHz UHF band used by many wireless microphone receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Antennas Included\u003c\/strong\u003e — The kit provides a matched pair of 1\/2-wave antennas for use with diversity receivers that have dual antenna inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Pass-Through Connectors\u003c\/strong\u003e — Included BNC connectors enable clean front-panel mounting on receivers with BNC antenna inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and Remote Mounting\u003c\/strong\u003e — Supplied hardware supports both front-of-rack mounting and remote placement for improved line of sight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:320px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/2-Wave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e470 to 530 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector Type of Included Cable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Audio-Technica (audio-technica.com).\u003c\/p\u003e","brand":"Audio-Technica","offers":[{"title":"Default Title","offer_id":44430974648556,"sku":"1\/2-WAVE 470T530","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-half-wave-antenna-kit-470-to-530-mhz-12-wave-470t530-creation-networks-54435.jpg?v=1757936203"},{"product_id":"audio-technica-rf-venue-half-wave-antenna-kit-500-to-570-mhz-1-2-wave-500t570","title":"Audio-Technica RF Venue Half-Wave Antenna Kit (500 to 570 MHz) - 1\/2-WAVE 500T570","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe RF Venue Half-Wave Antenna Kit (500 to 570 MHz), distributed by Audio-Technica, replaces the stock 1\/4-wave whip antennas on many UHF wireless receivers with a pair of front- or remote-mounted 1\/2-wave antennas. Better antenna placement and gain across the 500 to 570 MHz band help extend reception range and reduce dropouts. The kit includes two antennas, BNC pass-through connectors for front-panel mounting, and hardware for remote installation. It is a practical RF performance upgrade for sound reinforcement and installed wireless microphone systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-half-wave-antenna-kit-500-to-570-mhz-12-wave-500t570-creation-networks-99900.jpg?v=1757936204\" alt=\"Audio-Technica RF Venue Half-Wave Antenna Kit 500 to 570 MHz 1\/2-WAVE 500T570\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eMany wireless microphone receivers ship with rear-mounted 1\/4-wave whip antennas tucked behind rack gear, where metal and obstructions weaken reception. This half-wave antenna kit corrects that by relocating a pair of higher-gain 1\/2-wave antennas to the front panel or to a remote position with clear line of sight to the transmitters. The outcome is a stronger, more consistent RF link and fewer audio interruptions during live events, presentations, and houses of worship. The included BNC pass-through connectors support front mounting on receivers with BNC antenna inputs, while the supplied hardware enables remote mounting on a wall, mic stand, or truss.\u003c\/p\u003e\u003cp\u003eThis 500 to 570 MHz kit covers a UHF segment used by a wide range of wireless systems, making it a versatile reception upgrade for existing inventory. For broader RF infrastructure planning, compare related antenna kits and accessories at our \u003ca href=\"https:\/\/creationnetworks.net\/search?q=1%2F2-WAVE%20500T570\"\u003eRF Venue half-wave antenna kit\u003c\/a\u003e listing. The kit is intended to pair with diversity receivers that use two antenna inputs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Wireless Performance\u003c\/strong\u003e — Upgrading from 1\/4-wave whips to a pair of 1\/2-wave antennas helps extend operating range and reduce dropouts in UHF wireless systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 to 570 MHz Coverage\u003c\/strong\u003e — The antennas are tuned for the 500 to 570 MHz UHF band used by many wireless microphone receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Antennas Included\u003c\/strong\u003e — The kit provides a matched pair of 1\/2-wave antennas for use with diversity receivers that have dual antenna inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Pass-Through Connectors\u003c\/strong\u003e — Included BNC connectors enable clean front-panel mounting on receivers with BNC antenna inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and Remote Mounting\u003c\/strong\u003e — Supplied hardware supports both front-of-rack mounting and remote placement for improved line of sight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:320px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/2-Wave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 to 570 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector Type of Included Cable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Audio-Technica (audio-technica.com).\u003c\/p\u003e","brand":"Audio-Technica","offers":[{"title":"Default Title","offer_id":44433509482732,"sku":"1\/2-WAVE 500T570","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-half-wave-antenna-kit-500-to-570-mhz-12-wave-500t570-creation-networks-99900.jpg?v=1757936204"},{"product_id":"audio-technica-rf-venue-half-wave-antenna-kit-530-to-608-mhz-1-2-wave-530t608","title":"Audio-Technica RF Venue Half-Wave Antenna Kit (530 to 608 MHz) - 1\/2-WAVE 530T608","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe RF Venue Half-Wave Antenna Kit (530 to 608 MHz), distributed by Audio-Technica, upgrades the stock 1\/4-wave whip antennas on many UHF wireless receivers to a pair of front- or remote-mounted 1\/2-wave antennas. Improved antenna placement and gain across the 530 to 608 MHz band help extend reception range and reduce dropouts. The kit includes two antennas, BNC pass-through connectors for front-panel mounting, and hardware for remote installation. It is a practical RF performance upgrade for sound reinforcement and installed wireless microphone systems.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-half-wave-antenna-kit-530-to-608-mhz-12-wave-530t608-creation-networks-12198.jpg?v=1757936206\" alt=\"Audio-Technica RF Venue Half-Wave Antenna Kit 530 to 608 MHz 1\/2-WAVE 530T608\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eMany wireless microphone receivers ship with rear-mounted 1\/4-wave whip antennas positioned behind rack gear, where metal and obstructions degrade reception. This half-wave antenna kit resolves that by relocating a pair of higher-gain 1\/2-wave antennas to the front panel or to a remote position with clear line of sight to the transmitters. The result is a stronger, more consistent RF link and fewer audio interruptions during live events, presentations, and houses of worship. The included BNC pass-through connectors support front mounting on receivers with BNC antenna inputs, while the supplied hardware enables remote mounting on a wall, mic stand, or truss.\u003c\/p\u003e\u003cp\u003eThis 530 to 608 MHz kit covers a UHF segment used by a wide range of wireless systems, making it a versatile reception upgrade for existing inventory. For broader RF infrastructure planning, compare related antenna kits and accessories at our \u003ca href=\"https:\/\/creationnetworks.net\/search?q=1%2F2-WAVE%20530T608\"\u003eRF Venue half-wave antenna kit\u003c\/a\u003e listing. The kit is intended to pair with diversity receivers that use two antenna inputs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Wireless Performance\u003c\/strong\u003e — Upgrading from 1\/4-wave whips to a pair of 1\/2-wave antennas helps extend operating range and reduce dropouts in UHF wireless systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e530 to 608 MHz Coverage\u003c\/strong\u003e — The antennas are tuned for the 530 to 608 MHz UHF band used by many wireless microphone receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Antennas Included\u003c\/strong\u003e — The kit provides a matched pair of 1\/2-wave antennas for use with diversity receivers that have dual antenna inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBNC Pass-Through Connectors\u003c\/strong\u003e — Included BNC connectors enable clean front-panel mounting on receivers with BNC antenna inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and Remote Mounting\u003c\/strong\u003e — Supplied hardware supports both front-of-rack mounting and remote placement for improved line of sight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:320px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/2-Wave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e530 to 608 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector Type of Included Cable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Audio-Technica (audio-technica.com).\u003c\/p\u003e","brand":"Audio-Technica","offers":[{"title":"Default Title","offer_id":44433514692844,"sku":"1\/2-WAVE 530T608","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-half-wave-antenna-kit-530-to-608-mhz-12-wave-530t608-creation-networks-12198.jpg?v=1757936206"},{"product_id":"audio-technica-rf-venue-attenuator-kit-6-db-2-pack","title":"Audio-Technica RF Venue Attenuator Kit 6-DB (2-Pack)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe RF Venue Attenuator Kit 6-DB (2-Pack), distributed by Audio-Technica, provides two 6 dB signal attenuators for managing RF input levels in wireless microphone systems. Inline attenuation helps prevent receiver front-end overload when antennas or signal sources deliver more RF energy than a receiver can cleanly handle. The two-pack supports dual-input diversity receivers, allowing matched attenuation on both antenna paths. It is a compact, practical accessory for tuning RF gain structure in live and installed audio environments.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-attenuator-kit-6-db-2-pack-creation-networks-76478.jpg?v=1757936207\" alt=\"Audio-Technica RF Venue Attenuator Kit 6-DB 2-Pack\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eStrong RF signals can overload a wireless receiver's front end, producing intermodulation, desensitization, and unstable reception. Inline attenuators reduce incoming signal strength by a fixed amount so the receiver operates within its optimal input range. This kit supplies two 6 dB attenuators, which lets you apply consistent attenuation across both antenna inputs of a diversity receiver or distribute units across multiple channels in a coordinated RF system. Correct gain staging at the antenna stage is a common requirement when using active antennas, antenna distribution, or long coaxial runs.\u003c\/p\u003e\u003cp\u003eFor larger deployments, these attenuators integrate into an RF infrastructure alongside antenna kits and distribution gear. To review compatible RF accessories, see our \u003ca href=\"https:\/\/creationnetworks.net\/search?q=RF%20Venue%20Attenuator\"\u003eRF Venue attenuator kit\u003c\/a\u003e listing. Each pack contains two attenuators, making it convenient to outfit a dual-antenna receiver in a single purchase.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 dB Fixed Attenuation\u003c\/strong\u003e — Each attenuator reduces incoming RF signal strength by 6 dB to keep receiver input levels within their optimal range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Pack\u003c\/strong\u003e — The kit includes two attenuators, enough to treat both antenna inputs of a diversity receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-End Overload Protection\u003c\/strong\u003e — Inline attenuation helps prevent receiver desensitization and intermodulation caused by excessive RF input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF System Gain Staging\u003c\/strong\u003e — The attenuators support proper gain structure when used with active antennas, distribution systems, or long coaxial runs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:320px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAttenuation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 (2-Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Audio-Technica (audio-technica.com).\u003c\/p\u003e","brand":"Audio-Technica","offers":[{"title":"Default Title","offer_id":44433535205612,"sku":"ATTENUATOR KIT 6DB","price":84.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-rf-venue-attenuator-kit-6-db-2-pack-creation-networks-76478.jpg?v=1757936207"},{"product_id":"audio-technica-dfincover-rf-venue-padded-canvas-cover-for-diversity-fin-antenna-black","title":"Audio-Technica DFINCOVER RF Venue Padded Canvas Cover for Diversity Fin Antenna (Black)","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe DFINCOVER is a black padded canvas cover from RF Venue designed to protect the Diversity Fin (DFIN) antenna. It slips over the antenna to guard the finish and surface against scuffs, dust, and handling during transport and storage. The cover is intended specifically for the Diversity Fin antenna, which is sold separately. It is a practical accessory for rental, touring, and portable wireless microphone rigs.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-dfincover-rf-venue-padded-canvas-cover-for-diversity-fin-antenna-black-creation-networks-26484.jpg?v=1757936227\" alt=\"RF Venue DFINCOVER black padded canvas cover for Diversity Fin antenna\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eThe RF Venue DFINCOVER padded canvas cover is made to protect the Diversity Fin antenna when it is not deployed or while it is being moved between venues. The padded canvas construction provides a protective layer against the bumps and abrasion that come with transport in touring and rental workflows. By keeping the antenna covered during storage and transit, the cover helps preserve the appearance and surface of an antenna that is frequently set up and torn down. The black finish keeps the cover discreet and consistent with typical stage and production equipment. AV teams managing portable wireless microphone systems will find it a useful addition for protecting their RF coordination hardware on the road. Buyers comparing antenna accessories can review options at Creation Networks through our \u003ca href=\"https:\/\/creationnetworks.net\/search?q=DFINCOVER\"\u003eDFINCOVER padded cover\u003c\/a\u003e search. As an accessory, the cover is intended to be used with a Diversity Fin antenna, which is sold separately.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePadded Canvas Construction\u003c\/strong\u003e — The cover is made from padded canvas to provide a protective layer during transport and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiversity Fin Antenna Fit\u003c\/strong\u003e — It is designed specifically to protect the RF Venue Diversity Fin (DFIN) antenna.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Finish\u003c\/strong\u003e — The black color keeps the cover discreet alongside typical stage and production equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport and Storage Protection\u003c\/strong\u003e — It guards the antenna surface against scuffs, dust, and handling when the antenna is not deployed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:320px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePadded canvas antenna cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRF Venue Diversity Fin (DFIN) antenna (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.9em;\"\u003eSpecifications sourced from Audio-Technica (audio-technica.com).\u003c\/p\u003e","brand":"Audio-Technica","offers":[{"title":"Default Title","offer_id":44434664325356,"sku":"DFINCOVER","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/audio-technica-dfincover-rf-venue-padded-canvas-cover-for-diversity-fin-antenna-black-creation-networks-26484.jpg?v=1757936227"}],"url":"https:\/\/creationnetworks.net\/collections\/audio-technica-antenna-rf.oembed","provider":"Creation Networks","version":"1.0","type":"link"}